blob: c73bf2352aca6a9d8ffd019211bfab857fcd6e56 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Mediatek Video Decode Accelerator With Multi Hardware
maintainers:
- Yunfei Dong <yunfei.dong@mediatek.com>
description: |
Mediatek Video Decode is the video decode hardware present in Mediatek
SoCs which supports high resolution decoding functionalities. Required
parent and child device node.
About the Decoder Hardware Block Diagram, please check below:
+---------------------------------+------------------------------------+
| | |
| input -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output |
| || | || |
+------------||-------------------+---------------------||-------------+
lat workqueue | core workqueue <parent>
-------------||-----------------------------------------||------------------
|| || <child>
\/ <----------------HW index-------------->\/
+------------------------------------------------------+
| enable/disable |
| clk power irq iommu |
| (lat/lat soc/core0/core1) |
+------------------------------------------------------+
As above, there are parent and child devices, child mean each hardware. The child device
controls the information of each hardware independent which include clk/power/irq.
There are two workqueues in parent device: lat workqueue and core workqueue. They are used
to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer,
then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode
done. Core workqueue need to get lat buffer and output buffer, then enable core to decode,
writing the result to output buffer, disable hardware when core decode done. These two
hardwares will decode each frame cyclically.
For the smi common may not the same for each hardware, can't combine all hardware in one node,
or leading to iommu fault when access dram data.
properties:
compatible:
const: mediatek,mt8192-vcodec-dec
reg:
maxItems: 1
iommus:
minItems: 1
maxItems: 32
description: |
List of the hardware port in respective IOMMU block for current Socs.
Refer to bindings/iommu/mediatek,iommu.yaml.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
description: |
The node of system control processor (SCP), using
the remoteproc & rpmsg framework.
dma-ranges:
maxItems: 1
description: |
Describes the physical address space of IOMMU maps to memory.
"#address-cells":
const: 2
"#size-cells":
const: 2
ranges: true
# Required child node:
patternProperties:
'^vcodec-lat@[0-9a-f]+$':
type: object
properties:
compatible:
const: mediatek,mtk-vcodec-lat
reg:
maxItems: 1
interrupts:
maxItems: 1
iommus:
minItems: 1
maxItems: 32
description: |
List of the hardware port in respective IOMMU block for current Socs.
Refer to bindings/iommu/mediatek,iommu.yaml.
clocks:
maxItems: 5
clock-names:
items:
- const: sel
- const: soc-vdec
- const: soc-lat
- const: vdec
- const: top
assigned-clocks:
maxItems: 1
assigned-clock-parents:
maxItems: 1
power-domains:
maxItems: 1
required:
- compatible
- reg
- interrupts
- iommus
- clocks
- clock-names
- assigned-clocks
- assigned-clock-parents
- power-domains
additionalProperties: false
'^vcodec-core@[0-9a-f]+$':
type: object
properties:
compatible:
const: mediatek,mtk-vcodec-core
reg:
maxItems: 1
interrupts:
maxItems: 1
iommus:
minItems: 1
maxItems: 32
description: |
List of the hardware port in respective IOMMU block for current Socs.
Refer to bindings/iommu/mediatek,iommu.yaml.
clocks:
maxItems: 5
clock-names:
items:
- const: sel
- const: soc-vdec
- const: soc-lat
- const: vdec
- const: top
assigned-clocks:
maxItems: 1
assigned-clock-parents:
maxItems: 1
power-domains:
maxItems: 1
required:
- compatible
- reg
- interrupts
- iommus
- clocks
- clock-names
- assigned-clocks
- assigned-clock-parents
- power-domains
additionalProperties: false
required:
- compatible
- reg
- iommus
- mediatek,scp
- dma-ranges
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/memory/mt8192-larb-port.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/mt8192-clk.h>
#include <dt-bindings/power/mt8192-power.h>
bus@16000000 {
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0x16000000 0x16000000 0 0x40000>;
video-codec@16000000 {
compatible = "mediatek,mt8192-vcodec-dec";
mediatek,scp = <&scp>;
iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0x16000000 0 0x40000>;
reg = <0 0x16000000 0 0x1000>; /* VDEC_SYS */
vcodec-lat@10000 {
compatible = "mediatek,mtk-vcodec-lat";
reg = <0 0x10000 0 0x800>;
interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
<&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
<&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
<&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
<&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
<&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
<&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
<&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
clocks = <&topckgen CLK_TOP_VDEC_SEL>,
<&vdecsys_soc CLK_VDEC_SOC_VDEC>,
<&vdecsys_soc CLK_VDEC_SOC_LAT>,
<&vdecsys_soc CLK_VDEC_SOC_LARB1>,
<&topckgen CLK_TOP_MAINPLL_D4>;
clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
};
vcodec-core@25000 {
compatible = "mediatek,mtk-vcodec-core";
reg = <0 0x25000 0 0x1000>;
interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
<&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
clocks = <&topckgen CLK_TOP_VDEC_SEL>,
<&vdecsys CLK_VDEC_VDEC>,
<&vdecsys CLK_VDEC_LAT>,
<&vdecsys CLK_VDEC_LARB1>,
<&topckgen CLK_TOP_MAINPLL_D4>;
clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
};
};
};