Documentation/devicetree/bindings/net/dsa/dsa-port.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Ethernet Switch port Device Tree Bindings

maintainers:
  - Andrew Lunn <andrew@lunn.ch>
  - Florian Fainelli <f.fainelli@gmail.com>
  - Vivien Didelot <vivien.didelot@gmail.com>

description:
  Ethernet switch port Description

allOf:
  - $ref: /schemas/net/ethernet-controller.yaml#

properties:
  reg:
    description: Port number

  label:
    description:
      Describes the label associated with this port, which will become
      the netdev name
    $ref: /schemas/types.yaml#/definitions/string

  link:
    description:
      Should be a list of phandles to other switch's DSA port. This
      port is used as the outgoing port towards the phandle ports. The
      full routing information must be given, not just the one hop
      routes to neighbouring switches
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      maxItems: 1

  ethernet:
    description:
      Should be a phandle to a valid Ethernet device node.  This host
      device is what the switch port is connected to
    $ref: /schemas/types.yaml#/definitions/phandle

  dsa-tag-protocol:
    description:
      Instead of the default, the switch will use this tag protocol if
      possible. Useful when a device supports multiple protocols and
      the default is incompatible with the Ethernet device.
    enum:
      - dsa
      - edsa
      - ocelot
      - ocelot-8021q
      - rtl8_4
      - rtl8_4t
      - seville

  phy-handle: true

  phy-mode: true

  fixed-link: true

  mac-address: true

  sfp: true

  managed: true

  rx-internal-delay-ps: true

  tx-internal-delay-ps: true

required:
  - reg

additionalProperties: true

...