blob: 528b49e2c0f8d71ced8c31202ebd5a2d5ecb5eb8 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2019 IBM Corp.
/dts-v1/;
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
model = "Rainier 2U";
compatible = "ibm,rainier-bmc", "aspeed,ast2600";
aliases {
i2c100 = &cfam0_i2c0;
i2c101 = &cfam0_i2c1;
i2c110 = &cfam0_i2c10;
i2c111 = &cfam0_i2c11;
i2c112 = &cfam0_i2c12;
i2c113 = &cfam0_i2c13;
i2c114 = &cfam0_i2c14;
i2c115 = &cfam0_i2c15;
i2c202 = &cfam1_i2c2;
i2c203 = &cfam1_i2c3;
i2c210 = &cfam1_i2c10;
i2c211 = &cfam1_i2c11;
i2c214 = &cfam1_i2c14;
i2c215 = &cfam1_i2c15;
i2c216 = &cfam1_i2c16;
i2c217 = &cfam1_i2c17;
i2c300 = &cfam2_i2c0;
i2c301 = &cfam2_i2c1;
i2c310 = &cfam2_i2c10;
i2c311 = &cfam2_i2c11;
i2c312 = &cfam2_i2c12;
i2c313 = &cfam2_i2c13;
i2c314 = &cfam2_i2c14;
i2c315 = &cfam2_i2c15;
i2c402 = &cfam3_i2c2;
i2c403 = &cfam3_i2c3;
i2c410 = &cfam3_i2c10;
i2c411 = &cfam3_i2c11;
i2c414 = &cfam3_i2c14;
i2c415 = &cfam3_i2c15;
i2c416 = &cfam3_i2c16;
i2c417 = &cfam3_i2c17;
serial4 = &uart5;
i2c16 = &i2c2mux0;
i2c17 = &i2c2mux1;
i2c18 = &i2c2mux2;
i2c19 = &i2c2mux3;
i2c20 = &i2c4mux0chn0;
i2c21 = &i2c4mux0chn1;
i2c22 = &i2c4mux0chn2;
i2c23 = &i2c5mux0chn0;
i2c24 = &i2c5mux0chn1;
i2c25 = &i2c6mux0chn0;
i2c26 = &i2c6mux0chn1;
i2c27 = &i2c6mux0chn2;
i2c28 = &i2c6mux0chn3;
i2c29 = &i2c11mux0chn0;
i2c30 = &i2c11mux0chn1;
spi10 = &cfam0_spi0;
spi11 = &cfam0_spi1;
spi12 = &cfam0_spi2;
spi13 = &cfam0_spi3;
spi20 = &cfam1_spi0;
spi21 = &cfam1_spi1;
spi22 = &cfam1_spi2;
spi23 = &cfam1_spi3;
spi30 = &cfam2_spi0;
spi31 = &cfam2_spi1;
spi32 = &cfam2_spi2;
spi33 = &cfam2_spi3;
spi40 = &cfam3_spi0;
spi41 = &cfam3_spi1;
spi42 = &cfam3_spi2;
spi43 = &cfam3_spi3;
};
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200n8 earlycon";
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
flash_memory: region@b8000000 {
no-map;
reg = <0xb8000000 0x04000000>; /* 64M */
};
ramoops@bc000000 {
compatible = "ramoops";
reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
record-size = <0x8000>;
console-size = <0x8000>;
ftrace-size = <0x8000>;
pmsg-size = <0x8000>;
max-reason = <3>; /* KMSG_DUMP_EMERG */
};
vga_memory: region@bf000000 {
no-map;
compatible = "shared-dma-pool";
reg = <0xbf000000 0x01000000>; /* 16M */
};
};
i2c2mux: i2cmux {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
i2c-parent = <&i2c2>;
mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
<&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
idle-state = <0>;
i2c2mux0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c2mux1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c2mux2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2c2mux3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
leds {
compatible = "gpio-leds";
/* BMC Card fault LED at the back */
bmc-ingraham0 {
gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
};
/* Enclosure ID LED at the back */
rear-enc-id0 {
gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
};
/* Enclosure fault LED at the back */
rear-enc-fault0 {
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
};
/* PCIE slot power LED */
pcieslot-power {
gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <1000>;
fan0-presence {
label = "fan0-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
fan1-presence {
label = "fan1-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
fan2-presence {
label = "fan2-presence";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
fan3-presence {
label = "fan3-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
fan4-presence {
label = "fan4-presence";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
fan5-presence {
label = "fan5-presence";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
};
iio-hwmon-battery {
compatible = "iio-hwmon";
io-channels = <&adc1 7>;
};
};
&adc1 {
status = "okay";
aspeed,int-vref-microvolt = <2500000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
&pinctrl_adc10_default &pinctrl_adc11_default
&pinctrl_adc12_default &pinctrl_adc13_default
&pinctrl_adc14_default &pinctrl_adc15_default>;
};
&ehci1 {
status = "okay";
};
&uhci {
status = "okay";
};
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
/*B0-B7*/ "","","","","","","checkstop","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","bmc-secure-boot","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","usb-power","","","","",
/*P0-P7*/ "","","","","pcieslot-power","","","",
/*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
/*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
/*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
"","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","";
i2c3_mux_oe_n {
gpio-hog;
gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
output-high;
line-name = "I2C3_MUX_OE_N";
};
usb_power {
gpio-hog;
gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
output-high;
};
};
&emmc_controller {
status = "okay";
};
&pinctrl_emmc_default {
bias-disable;
};
&emmc {
status = "okay";
clk-phase-mmc-hs200 = <180>, <180>;
};
&fsim0 {
status = "okay";
#address-cells = <2>;
#size-cells = <0>;
/*
* CFAM Reset is supposed to be active low but pass1 hardware is wired
* active high.
*/
cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
cfam@0,0 {
reg = <0 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <0>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam0_i2c0: i2c-bus@0 {
reg = <0>; /* OMI01 */
};
cfam0_i2c1: i2c-bus@1 {
reg = <1>; /* OMI23 */
};
cfam0_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam0_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam0_i2c12: i2c-bus@c {
reg = <12>; /* OP4A */
};
cfam0_i2c13: i2c-bus@d {
reg = <13>; /* OP4B */
};
cfam0_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam0_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam0_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam0_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam0_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam0_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ0: occ {
compatible = "ibm,p10-occ";
};
};
fsi_hub0: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
};
};
};
&fsi_hub0 {
cfam@1,0 {
reg = <1 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <1>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam1_i2c2: i2c-bus@2 {
reg = <2>; /* OMI45 */
};
cfam1_i2c3: i2c-bus@3 {
reg = <3>; /* OMI67 */
};
cfam1_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam1_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam1_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam1_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
cfam1_i2c16: i2c-bus@10 {
reg = <16>; /* OP6A */
};
cfam1_i2c17: i2c-bus@11 {
reg = <17>; /* OP6B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam1_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam1_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam1_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam1_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ1: occ {
compatible = "ibm,p10-occ";
};
};
fsi_hub1: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
cfam@2,0 {
reg = <2 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <2>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam2_i2c0: i2c-bus@0 {
reg = <0>; /* OM01 */
};
cfam2_i2c1: i2c-bus@1 {
reg = <1>; /* OM23 */
};
cfam2_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam2_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam2_i2c12: i2c-bus@c {
reg = <12>; /* OP4A */
};
cfam2_i2c13: i2c-bus@d {
reg = <13>; /* OP4B */
};
cfam2_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam2_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam2_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam2_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam2_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam2_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ2: occ {
compatible = "ibm,p10-occ";
};
};
fsi_hub2: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
cfam@3,0 {
reg = <3 0>;
#address-cells = <1>;
#size-cells = <1>;
chip-id = <3>;
scom@1000 {
compatible = "ibm,fsi2pib";
reg = <0x1000 0x400>;
};
i2c@1800 {
compatible = "ibm,fsi-i2c-master";
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam3_i2c2: i2c-bus@2 {
reg = <2>; /* OM45 */
};
cfam3_i2c3: i2c-bus@3 {
reg = <3>; /* OM67 */
};
cfam3_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
};
cfam3_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
};
cfam3_i2c14: i2c-bus@e {
reg = <14>; /* OP5A */
};
cfam3_i2c15: i2c-bus@f {
reg = <15>; /* OP5B */
};
cfam3_i2c16: i2c-bus@10 {
reg = <16>; /* OP6A */
};
cfam3_i2c17: i2c-bus@11 {
reg = <17>; /* OP6B */
};
};
fsi2spi@1c00 {
compatible = "ibm,fsi2spi";
reg = <0x1c00 0x400>;
#address-cells = <1>;
#size-cells = <0>;
cfam3_spi0: spi@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam3_spi1: spi@20 {
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam3_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
cfam3_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
eeprom@0 {
at25,byte-len = <0x80000>;
at25,addr-mode = <4>;
at25,page-size = <256>;
compatible = "atmel,at25";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
};
sbefifo@2400 {
compatible = "ibm,p9-sbefifo";
reg = <0x2400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
fsi_occ3: occ {
compatible = "ibm,p10-occ";
};
};
fsi_hub3: hub@3400 {
compatible = "fsi-master-hub";
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
no-scan-on-init;
};
};
};
/* Legacy OCC numbering (to get rid of when userspace is fixed) */
&fsi_occ0 {
reg = <1>;
};
&fsi_occ1 {
reg = <2>;
};
&fsi_occ2 {
reg = <3>;
};
&fsi_occ3 {
reg = <4>;
};
&ibt {
status = "okay";
};
&i2c0 {
status = "okay";
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
tca_pres1: tca9554@20{
compatible = "ti,tca9554";
reg = <0x20>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "",
"RUSSEL_FW_I2C_ENABLE_N",
"RUSSEL_OPPANEL_PRESENCE_N",
"BLYTH_OPPANEL_PRESENCE_N",
"CPU_TPM_CARD_PRESENT_N",
"DASD_BP2_PRESENT_N",
"DASD_BP1_PRESENT_N",
"DASD_BP0_PRESENT_N";
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
power-supply@68 {
compatible = "ibm,cffps";
reg = <0x68>;
};
power-supply@69 {
compatible = "ibm,cffps";
reg = <0x69>;
};
pca_pres1: pca9552@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
"", "", "", "", "", "";
};
};
&i2c4 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
pca9551@60 {
compatible = "nxp,pca9551";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "cablecard0-cxp-top";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "cablecard0-cxp-bot";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca9546@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
i2c-mux-idle-disconnect;
i2c4mux0chn0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
i2c4mux0chn1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
};
i2c4mux0chn2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
eeprom@52 {
compatible = "atmel,24c64";
reg = <0x52>;
};
};
};
};
&i2c5 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
pca9551@60 {
compatible = "nxp,pca9551";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "cablecard3-cxp-top";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "cablecard3-cxp-bot";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca9551@61 {
compatible = "nxp,pca9551";
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "cablecard4-cxp-top";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "cablecard4-cxp-bot";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca9546@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
i2c-mux-idle-disconnect;
i2c5mux0chn0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
i2c5mux0chn1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
};
};
};
&i2c6 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
tmp275@4b {
compatible = "ti,tmp275";
reg = <0x4b>;
};
pca9546@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
i2c-mux-idle-disconnect;
i2c6mux0chn0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@53 {
compatible = "atmel,24c64";
reg = <0x53>;
};
};
i2c6mux0chn1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
eeprom@52 {
compatible = "atmel,24c64";
reg = <0x52>;
};
};
i2c6mux0chn2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
i2c6mux0chn3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
};
};
};
&i2c7 {
multi-master;
status = "okay";
pca9552@30 {
compatible = "ibm,pca9552";
reg = <0x30>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "pcieslot0";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "pcieslot1";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "pcieslot2";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "pcieslot3";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "pcieslot4";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "cpu1";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@6 {
label = "cpu-vrm1";
reg = <6>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@8 {
label = "lcd-russel";
reg = <8>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca9552@31 {
compatible = "ibm,pca9552";
reg = <0x31>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "ddimm0";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "ddimm1";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "ddimm2";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "ddimm3";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "ddimm4";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "ddimm5";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@6 {
label = "ddimm6";
reg = <6>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@7 {
label = "ddimm7";
reg = <7>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@8 {
label = "ddimm8";
reg = <8>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@9 {
label = "ddimm9";
reg = <9>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@10 {
label = "ddimm10";
reg = <10>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@11 {
label = "ddimm11";
reg = <11>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@12 {
label = "ddimm12";
reg = <12>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@13 {
label = "ddimm13";
reg = <13>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@14 {
label = "ddimm14";
reg = <14>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@15 {
label = "ddimm15";
reg = <15>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca9552@32 {
compatible = "ibm,pca9552";
reg = <0x32>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "ddimm16";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "ddimm17";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "ddimm18";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "ddimm19";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "ddimm20";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "ddimm21";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@6 {
label = "ddimm22";
reg = <6>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@7 {
label = "ddimm23";
reg = <7>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@8 {
label = "ddimm24";
reg = <8>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@9 {
label = "ddimm25";
reg = <9>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@10 {
label = "ddimm26";
reg = <10>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@11 {
label = "ddimm27";
reg = <11>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@12 {
label = "ddimm28";
reg = <12>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@13 {
label = "ddimm29";
reg = <13>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@14 {
label = "ddimm30";
reg = <14>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@15 {
label = "ddimm31";
reg = <15>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca9552@33 {
compatible = "ibm,pca9552";
reg = <0x33>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "planar";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "cpu0";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "dasd-pyramid0";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "dasd-pyramid1";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "dasd-pyramid2";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@6 {
label = "cpu0-vrm0";
reg = <6>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@7 {
label = "rtc-battery";
reg = <7>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@8 {
label = "base-blyth";
reg = <8>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@9 {
label = "pcieslot6";
reg = <9>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@10 {
label = "pcieslot7";
reg = <10>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@11 {
label = "pcieslot8";
reg = <11>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@12 {
label = "pcieslot9";
reg = <12>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@13 {
label = "pcieslot10";
reg = <13>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@14 {
label = "pcieslot11";
reg = <14>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@15 {
label = "tpm-wilson";
reg = <15>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
si7021-a20@40 {
compatible = "silabs,si7020";
reg = <0x40>;
};
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
max: max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
#address-cells = <1>;
#size-cells = <0>;
fan0: fan@0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
fan1: fan@1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
fan2: fan@2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
fan3: fan@3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
};
fan4: fan@4 {
compatible = "pmbus-fan";
reg = <4>;
tach-pulses = <2>;
};
fan5: fan@5 {
compatible = "pmbus-fan";
reg = <5>;
tach-pulses = <2>;
};
};
pca9551@60 {
compatible = "nxp,pca9551";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "front-sys-id0";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "front-check-log0";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "front-enc-fault1";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "front-sys-pwron0";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca0: pca9552@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "fan0";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "fan1";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "fan2";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "fan3";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "fan4";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "fan5";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
ibm-panel@62 {
compatible = "ibm,op-panel";
reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
};
dps: dps310@76 {
compatible = "infineon,dps310";
reg = <0x76>;
#io-channel-cells = <0>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
};
&i2c8 {
status = "okay";
ucd90320@11 {
compatible = "ti,ucd90320";
reg = <0x11>;
};
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@4a {
compatible = "ti,tmp275";
reg = <0x4a>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
pca_pres3: pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "power-config-full-load", "";
};
pca_pres2: pca9552@61 {
compatible = "nxp,pca9552";
reg = <0x61>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
"", "", "", "";
};
};
&i2c9 {
status = "okay";
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
tmp423b@4d {
compatible = "ti,tmp423";
reg = <0x4d>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
};
&i2c10 {
status = "okay";
tmp423a@4c {
compatible = "ti,tmp423";
reg = <0x4c>;
};
tmp423b@4d {
compatible = "ti,tmp423";
reg = <0x4d>;
};
eeprom@50 {
compatible = "atmel,24c128";
reg = <0x50>;
};
};
&i2c11 {
status = "okay";
tmp275@48 {
compatible = "ti,tmp275";
reg = <0x48>;
};
tmp275@49 {
compatible = "ti,tmp275";
reg = <0x49>;
};
pca9551@60 {
compatible = "nxp,pca9551";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "cablecard10-cxp-top";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "cablecard10-cxp-bot";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
pca9546@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
i2c-mux-idle-disconnect;
i2c11mux0chn0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
i2c11mux0chn1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
eeprom@51 {
compatible = "atmel,24c64";
reg = <0x51>;
};
};
};
};
&i2c12 {
status = "okay";
tpm@2e {
compatible = "nuvoton,npct75x";
reg = <0x2e>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
&i2c13 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "nvme0";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "nvme1";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "nvme2";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "nvme3";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "nvme4";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "nvme5";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@6 {
label = "nvme6";
reg = <6>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@7 {
label = "nvme7";
reg = <7>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
};
&i2c14 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "nvme8";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "nvme9";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "nvme10";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "nvme11";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "nvme12";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "nvme13";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@6 {
label = "nvme14";
reg = <6>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@7 {
label = "nvme15";
reg = <7>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
};
&i2c15 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
pca9552@60 {
compatible = "nxp,pca9552";
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
led@0 {
label = "nvme16";
reg = <0>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@1 {
label = "nvme17";
reg = <1>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@2 {
label = "nvme18";
reg = <2>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@3 {
label = "nvme19";
reg = <3>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@4 {
label = "nvme20";
reg = <4>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@5 {
label = "nvme21";
reg = <5>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@6 {
label = "nvme22";
reg = <6>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
led@7 {
label = "nvme23";
reg = <7>;
retain-state-shutdown;
default-state = "keep";
type = <PCA955X_TYPE_LED>;
};
};
};
&vuart1 {
status = "okay";
};
&vuart2 {
status = "okay";
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
};
&mac2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii3_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
<&syscon ASPEED_CLK_MAC3RCLK>;
clock-names = "MACCLK", "RCLK";
use-ncsi;
};
&mac3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii4_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
<&syscon ASPEED_CLK_MAC4RCLK>;
clock-names = "MACCLK", "RCLK";
use-ncsi;
};
&wdt1 {
aspeed,reset-type = "none";
aspeed,external-signal;
aspeed,ext-push-pull;
aspeed,ext-active-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdtrst1_default>;
};
&wdt2 {
status = "okay";
};
&xdma {
status = "okay";
memory-region = <&vga_memory>;
};
&kcs2 {
status = "okay";
aspeed,lpc-io-reg = <0xca8 0xcac>;
};
&kcs3 {
status = "okay";
aspeed,lpc-io-reg = <0xca2>;
aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};