blob: 85e56992d2d05693eff7cca8fdb81cd9994568ef [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
chosen { };
memory@0 {
device_type = "memory";
reg = <0x0 0x0>;
};
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
firmware {
scm {
compatible = "qcom,scm-msm8226", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_block 0 0x80>;
#hwlock-cells = <1>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
smem_region: smem@3000000 {
reg = <0x3000000 0x100000>;
no-map;
};
};
smd {
compatible = "qcom,smd";
rpm {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8226";
qcom,smd-channels = "rpm_requests";
rpmpd: power-controller {
compatible = "qcom,msm8226-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <1>;
};
rpmpd_opp_svs_krait: opp2 {
opp-level = <2>;
};
rpmpd_opp_svs_soc: opp3 {
opp-level = <3>;
};
rpmpd_opp_nom: opp4 {
opp-level = <4>;
};
rpmpd_opp_turbo: opp5 {
opp-level = <5>;
};
rpmpd_opp_super_turbo: opp6 {
opp-level = <6>;
};
};
};
};
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
interrupt-controller;
#interrupt-cells = <3>;
};
apcs: syscon@f9011000 {
compatible = "syscon";
reg = <0xf9011000 0x1000>;
};
sdhc_1: sdhci@f9824900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_default_state>;
status = "disabled";
};
sdhc_2: sdhci@f98a4900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_default_state>;
status = "disabled";
};
sdhc_3: sdhci@f9864900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
<&gcc GCC_SDCC3_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
pinctrl-names = "default";
pinctrl-0 = <&sdhc3_default_state>;
status = "disabled";
};
blsp1_uart3: serial@f991f000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991f000 0x1000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart4: serial@f9920000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf9920000 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_i2c1: i2c@f9923000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9923000 0x1000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c1_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c2: i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c2_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c3: i2c@f9925000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c3_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c4: i2c@f9926000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9926000 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c4_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c5: i2c@f9927000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9927000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c5_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
usb: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
<0xf9a55200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>;
clock-names = "iface", "core";
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
assigned-clock-rates = <75000000>;
resets = <&gcc GCC_USB_HS_BCR>;
reset-names = "core";
phy_type = "ulpi";
dr_mode = "otg";
hnp-disable;
srp-disable;
adp-disable;
ahb-burst-config = <0>;
phy-names = "usb-phy";
phys = <&usb_hs_phy>;
status = "disabled";
#reset-cells = <1>;
ulpi {
usb_hs_phy: phy {
compatible = "qcom,usb-hs-phy-msm8226",
"qcom,usb-hs-phy";
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
reset-names = "phy", "por";
qcom,init-seq = /bits/ 8 <0x0 0x44
0x1 0x68 0x2 0x24 0x3 0x13>;
};
};
};
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8226";
reg = <0xfc400000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,msm8226-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 117>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
blsp1_i2c1_pins: blsp1-i2c1 {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c2_pins: blsp1-i2c2 {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c3_pins: blsp1-i2c3 {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c4_pins: blsp1-i2c4 {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c5_pins: blsp1-i2c5 {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
sdhc1_default_state: sdhc1-default-state {
clk {
pins = "sdc1_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdhc2_default_state: sdhc2-default-state {
clk {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdhc3_default_state: sdhc3-default-state {
clk {
pins = "gpio44";
function = "sdc3";
drive-strength = <8>;
bias-disable;
};
cmd {
pins = "gpio43";
function = "sdc3";
drive-strength = <8>;
bias-pull-up;
};
data {
pins = "gpio39", "gpio40", "gpio41", "gpio42";
function = "sdc3";
drive-strength = <8>;
bias-pull-up;
};
};
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
rng@f9bff000 {
compatible = "qcom,prng";
reg = <0xf9bff000 0x200>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
timer@f9020000 {
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
rpm_msg_ram: memory@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
tcsr_mutex_block: syscon@fd484000 {
compatible = "syscon";
reg = <0xfd484000 0x2000>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 2
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
};
};