blob: fc478ac4e781f99a847cc8ca723c8f10b0f79d6d [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3188.dtsi"
/ {
model = "Rockchip PX3-EVB";
compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
aliases {
mmc0 = &mmc0;
mmc1 = &emmc;
};
chosen {
stdout-path = "serial2:115200n8";
};
memory@60000000 {
reg = <0x60000000 0x80000000>;
device_type = "memory";
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
wakeup-source;
debounce-interval = <100>;
};
};
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
status = "okay";
};
&i2c0 {
status = "okay";
accelerometer@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
rk808: pmic@1c {
compatible = "rockchip,rk818";
reg = <0x1c>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_io>;
vcc9-supply = <&vcc_io>;
regulators {
vdd_cpu: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_cif: LDO_REG1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_cif";
};
vcc_jetta33: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_jetta33";
};
vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
lvds_12: LDO_REG4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "lvds_12";
};
lvds_25: LDO_REG5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "lvds_25";
};
cif_18: LDO_REG6 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "cif_18";
};
vcc_sd: LDO_REG7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_sd";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
wl_18: LDO_REG8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "wl_18";
};
lcd_33: SWITCH_REG {
regulator-name = "lcd_33";
};
};
};
};
&i2c2 {
gsl1680: touchscreen@40 {
compatible = "silead,gsl1680";
reg = <0x40>;
interrupt-parent = <&gpio1>;
interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;
silead,max-fingers = <5>;
};
};
&mmc0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
};
&pinctrl {
pcfg_output_low: pcfg-output-low {
output-low;
};
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host {
status = "okay";
};
&usb_otg {
status = "okay";
};
&wdt {
status = "okay";
};