| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung's Exynos850 SoC pin-mux and pin-config device tree source |
| * |
| * Copyright (C) 2017 Samsung Electronics Co., Ltd. |
| * Copyright (C) 2021 Linaro Ltd. |
| * |
| * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device |
| * tree nodes in this file. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/pinctrl/samsung.h> |
| |
| &pinctrl_alive { |
| gpa0: gpa0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpa1: gpa1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpa2: gpa2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpa3: gpa3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpa4: gpa4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpq0: gpq0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| /* I2C5 (also called CAM_PMIC_I2C in TRM) */ |
| i2c5_pins: i2c5-pins { |
| samsung,pins = "gpa3-5", "gpa3-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* I2C6 (also called MOTOR_I2C in TRM) */ |
| i2c6_pins: i2c6-pins { |
| samsung,pins = "gpa3-7", "gpa4-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* USI: UART_DEBUG_0 pins */ |
| uart0_pins: uart0-pins { |
| samsung,pins = "gpq0-0", "gpq0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| }; |
| |
| /* USI: UART_DEBUG_1 pins */ |
| uart1_pins: uart1-pins { |
| samsung,pins = "gpa3-7", "gpa4-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| }; |
| }; |
| |
| &pinctrl_cmgp { |
| gpm0: gpm0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpm1: gpm1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpm2: gpm2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpm3: gpm3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpm4: gpm4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpm5: gpm5-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpm6: gpm6-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| gpm7: gpm7-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| /* USI_CMGP0: HSI2C function */ |
| hsi2c3_pins: hsi2c3-pins { |
| samsung,pins = "gpm0-0", "gpm1-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */ |
| uart1_single_pins: uart1-single-pins { |
| samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| }; |
| |
| /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */ |
| uart1_dual_pins: uart1-dual-pins { |
| samsung,pins = "gpm0-0", "gpm1-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| }; |
| |
| /* USI_CMGP0: SPI function */ |
| spi1_pins: spi1-pins { |
| samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* USI_CMGP1: HSI2C function */ |
| hsi2c4_pins: hsi2c4-pins { |
| samsung,pins = "gpm4-0", "gpm5-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */ |
| uart2_single_pins: uart2-single-pins { |
| samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| }; |
| |
| /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */ |
| uart2_dual_pins: uart2-dual-pins { |
| samsung,pins = "gpm4-0", "gpm5-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| }; |
| |
| /* USI_CMGP1: SPI function */ |
| spi2_pins: spi2-pins { |
| samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_aud { |
| gpb0: gpb0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb1: gpb1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| aud_codec_mclk_pins: aud-codec-mclk-pins { |
| samsung,pins = "gpb0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| |
| aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins { |
| samsung,pins = "gpb0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| |
| aud_i2s0_pins: aud-i2s0-pins { |
| samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| |
| aud_i2s0_idle_pins: aud-i2s0-idle-pins { |
| samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| |
| aud_i2s1_pins: aud-i2s1-pins { |
| samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| |
| aud_i2s1_idle_pins: aud-i2s1-idle-pins { |
| samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| |
| aud_fm_pins: aud-fm-pins { |
| samsung,pins = "gpb1-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| |
| aud_fm_idle_pins: aud-fm-idle-pins { |
| samsung,pins = "gpb1-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| }; |
| |
| &pinctrl_hsi { |
| gpf2: gpf2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sd2_clk_pins: sd2-clk-pins { |
| samsung,pins = "gpf2-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; |
| }; |
| |
| sd2_cmd_pins: sd2-cmd-pins { |
| samsung,pins = "gpf2-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; |
| }; |
| |
| sd2_bus1_pins: sd2-bus1-pins { |
| samsung,pins = "gpf2-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; |
| }; |
| |
| sd2_bus4_pins: sd2-bus4-pins { |
| samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>; |
| }; |
| |
| sd2_pdn_pins: sd2-pdn-pins { |
| samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", |
| "gpf2-4", "gpf2-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| }; |
| }; |
| |
| &pinctrl_core { |
| gpf0: gpf0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf1: gpf1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sd0_clk_pins: sd0-clk-pins { |
| samsung,pins = "gpf0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_cmd_pins: sd0-cmd-pins { |
| samsung,pins = "gpf0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_rdqs_pins: sd0-rdqs-pins { |
| samsung,pins = "gpf0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_nreset_pins: sd0-nreset-pins { |
| samsung,pins = "gpf0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_bus1_pins: sd0-bus1-pins { |
| samsung,pins = "gpf1-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_bus4_pins: sd0-bus4-pins { |
| samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_bus8_pins: sd0-bus8-pins { |
| samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| }; |
| |
| &pinctrl_peri { |
| gpc0: gpc0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc1: gpc1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg0: gpg0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg1: gpg1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg2: gpg2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg3: gpg3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpp0: gpp0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| gpp1: gpp1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpp2: gpp2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sensor_mclk0_in_pins: sensor-mclk0-in-pins { |
| samsung,pins = "gpc0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk0_out_pins: sensor-mclk0-out-pins { |
| samsung,pins = "gpc0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk0_fn_pins: sensor-mclk0-fn-pins { |
| samsung,pins = "gpc0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk1_in_pins: sensor-mclk1-in-pins { |
| samsung,pins = "gpc0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk1_out_pins: sensor-mclk1-out-pins { |
| samsung,pins = "gpc0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk1_fn_pins: sensor-mclk1-fn-pins { |
| samsung,pins = "gpc0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk2_in_pins: sensor-mclk2-in-pins { |
| samsung,pins = "gpc0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk2_out_pins: sensor-mclk2-out-pins { |
| samsung,pins = "gpc0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| sensor_mclk2_fn_pins: sensor-mclk2-fn-pins { |
| samsung,pins = "gpc0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| }; |
| |
| /* USI: HSI2C0 */ |
| hsi2c0_pins: hsi2c0-pins { |
| samsung,pins = "gpc1-0", "gpc1-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* USI: HSI2C1 */ |
| hsi2c1_pins: hsi2c1-pins { |
| samsung,pins = "gpc1-2", "gpc1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* USI: HSI2C2 */ |
| hsi2c2_pins: hsi2c2-pins { |
| samsung,pins = "gpc1-4", "gpc1-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| /* USI: SPI */ |
| spi0_pins: spi0-pins { |
| samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c0_pins: i2c0-pins { |
| samsung,pins = "gpp0-0", "gpp0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c1_pins: i2c1-pins { |
| samsung,pins = "gpp0-2", "gpp0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c2_pins: i2c2-pins { |
| samsung,pins = "gpp0-4", "gpp0-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c3_pins: i2c3-pins { |
| samsung,pins = "gpp1-0", "gpp1-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c4_pins: i2c4-pins { |
| samsung,pins = "gpp1-2", "gpp1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| xclkout_pins: xclkout-pins { |
| samsung,pins = "gpq0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| }; |
| }; |
