blob: f502c36f3be543071f96bac2851d2179ccad74a2 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* phy-ti-pipe3 - PIPE3 PHY driver.
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/phy/phy.h>
#include <linux/of.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
#include <linux/phy/omap_control_phy.h>
#include <linux/of_platform.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
#define PLL_CONFIGURATION2 0x00000010
#define PLL_CONFIGURATION3 0x00000014
#define PLL_CONFIGURATION4 0x00000020
#define PLL_REGM_MASK 0x001FFE00
#define PLL_REGM_SHIFT 0x9
#define PLL_REGM_F_MASK 0x0003FFFF
#define PLL_REGM_F_SHIFT 0x0
#define PLL_REGN_MASK 0x000001FE
#define PLL_REGN_SHIFT 0x1
#define PLL_SELFREQDCO_MASK 0x0000000E
#define PLL_SELFREQDCO_SHIFT 0x1
#define PLL_SD_MASK 0x0003FC00
#define PLL_SD_SHIFT 10
#define SET_PLL_GO 0x1
#define PLL_LDOPWDN BIT(15)
#define PLL_TICOPWDN BIT(16)
#define PLL_LOCK 0x2
#define PLL_IDLE 0x1
#define SATA_PLL_SOFT_RESET BIT(18)
#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14)
#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14
#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22)
#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22
#define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
#define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
#define PCIE_PCS_MASK 0xFF0000
#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10
#define PIPE3_PHY_RX_ANA_PROGRAMMABILITY 0x0000000C
#define INTERFACE_MASK GENMASK(31, 27)
#define INTERFACE_SHIFT 27
#define INTERFACE_MODE_USBSS BIT(4)
#define INTERFACE_MODE_SATA_1P5 BIT(3)
#define INTERFACE_MODE_SATA_3P0 BIT(2)
#define INTERFACE_MODE_PCIE BIT(0)
#define LOSD_MASK GENMASK(17, 14)
#define LOSD_SHIFT 14
#define MEM_PLLDIV GENMASK(6, 5)
#define PIPE3_PHY_RX_TRIM 0x0000001C
#define MEM_DLL_TRIM_SEL_MASK GENMASK(31, 30)
#define MEM_DLL_TRIM_SHIFT 30
#define PIPE3_PHY_RX_DLL 0x00000024
#define MEM_DLL_PHINT_RATE_MASK GENMASK(31, 30)
#define MEM_DLL_PHINT_RATE_SHIFT 30
#define PIPE3_PHY_RX_DIGITAL_MODES 0x00000028
#define MEM_HS_RATE_MASK GENMASK(28, 27)
#define MEM_HS_RATE_SHIFT 27
#define MEM_OVRD_HS_RATE BIT(26)
#define MEM_OVRD_HS_RATE_SHIFT 26
#define MEM_CDR_FASTLOCK BIT(23)
#define MEM_CDR_FASTLOCK_SHIFT 23
#define MEM_CDR_LBW_MASK GENMASK(22, 21)
#define MEM_CDR_LBW_SHIFT 21
#define MEM_CDR_STEPCNT_MASK GENMASK(20, 19)
#define MEM_CDR_STEPCNT_SHIFT 19
#define MEM_CDR_STL_MASK GENMASK(18, 16)
#define MEM_CDR_STL_SHIFT 16
#define MEM_CDR_THR_MASK GENMASK(15, 13)
#define MEM_CDR_THR_SHIFT 13
#define MEM_CDR_THR_MODE BIT(12)
#define MEM_CDR_THR_MODE_SHIFT 12
#define MEM_CDR_2NDO_SDM_MODE BIT(11)
#define MEM_CDR_2NDO_SDM_MODE_SHIFT 11
#define PIPE3_PHY_RX_EQUALIZER 0x00000038
#define MEM_EQLEV_MASK GENMASK(31, 16)
#define MEM_EQLEV_SHIFT 16
#define MEM_EQFTC_MASK GENMASK(15, 11)
#define MEM_EQFTC_SHIFT 11
#define MEM_EQCTL_MASK GENMASK(10, 7)
#define MEM_EQCTL_SHIFT 7
#define MEM_OVRD_EQLEV BIT(2)
#define MEM_OVRD_EQLEV_SHIFT 2
#define MEM_OVRD_EQFTC BIT(1)
#define MEM_OVRD_EQFTC_SHIFT 1
#define SATA_PHY_RX_IO_AND_A2D_OVERRIDES 0x44
#define MEM_CDR_LOS_SOURCE_MASK GENMASK(10, 9)
#define MEM_CDR_LOS_SOURCE_SHIFT 9
/*
* This is an Empirical value that works, need to confirm the actual
* value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
* to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
*/
#define PLL_IDLE_TIME 100 /* in milliseconds */
#define PLL_LOCK_TIME 100 /* in milliseconds */
enum pipe3_mode { PIPE3_MODE_PCIE = 1,
PIPE3_MODE_SATA,
PIPE3_MODE_USBSS };
struct pipe3_dpll_params {
u16 m;
u8 n;
u8 freq:3;
u8 sd;
u32 mf;
};
struct pipe3_dpll_map {
unsigned long rate;
struct pipe3_dpll_params params;
};
struct pipe3_settings {
u8 ana_interface;
u8 ana_losd;
u8 dig_fastlock;
u8 dig_lbw;
u8 dig_stepcnt;
u8 dig_stl;
u8 dig_thr;
u8 dig_thr_mode;
u8 dig_2ndo_sdm_mode;
u8 dig_hs_rate;
u8 dig_ovrd_hs_rate;
u8 dll_trim_sel;
u8 dll_phint_rate;
u8 eq_lev;
u8 eq_ftc;
u8 eq_ctl;
u8 eq_ovrd_lev;
u8 eq_ovrd_ftc;
};
struct ti_pipe3 {
void __iomem *pll_ctrl_base;
void __iomem *phy_rx;
void __iomem *phy_tx;
struct device *dev;
struct device *control_dev;
struct clk *wkupclk;
struct clk *sys_clk;
struct clk *refclk;
struct clk *div_clk;
struct pipe3_dpll_map *dpll_map;
struct regmap *phy_power_syscon; /* ctrl. reg. acces */
struct regmap *pcs_syscon; /* ctrl. reg. acces */
struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
unsigned int dpll_reset_reg; /* reg. index within syscon */
unsigned int power_reg; /* power reg. index within syscon */
unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
bool sata_refclk_enabled;
enum pipe3_mode mode;
struct pipe3_settings settings;
};
static struct pipe3_dpll_map dpll_map_usb[] = {
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
{ }, /* Terminator */
};
static struct pipe3_dpll_map dpll_map_sata[] = {
{12000000, {625, 4, 4, 6, 0} }, /* 12 MHz */
{16800000, {625, 6, 4, 7, 0} }, /* 16.8 MHz */
{19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
{20000000, {750, 9, 4, 6, 0} }, /* 20 MHz */
{26000000, {750, 12, 4, 6, 0} }, /* 26 MHz */
{38400000, {625, 15, 4, 6, 0} }, /* 38.4 MHz */
{ }, /* Terminator */
};
struct pipe3_data {
enum pipe3_mode mode;
struct pipe3_dpll_map *dpll_map;
struct pipe3_settings settings;
};
static struct pipe3_data data_usb = {
.mode = PIPE3_MODE_USBSS,
.dpll_map = dpll_map_usb,
.settings = {
/* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */
.ana_interface = INTERFACE_MODE_USBSS,
.ana_losd = 0xa,
.dig_fastlock = 1,
.dig_lbw = 3,
.dig_stepcnt = 0,
.dig_stl = 0x3,
.dig_thr = 1,
.dig_thr_mode = 1,
.dig_2ndo_sdm_mode = 0,
.dig_hs_rate = 0,
.dig_ovrd_hs_rate = 1,
.dll_trim_sel = 0x2,
.dll_phint_rate = 0x3,
.eq_lev = 0,
.eq_ftc = 0,
.eq_ctl = 0x9,
.eq_ovrd_lev = 0,
.eq_ovrd_ftc = 0,
},
};
static struct pipe3_data data_sata = {
.mode = PIPE3_MODE_SATA,
.dpll_map = dpll_map_sata,
.settings = {
/* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */
.ana_interface = INTERFACE_MODE_SATA_3P0,
.ana_losd = 0x5,
.dig_fastlock = 1,
.dig_lbw = 3,
.dig_stepcnt = 0,
.dig_stl = 0x3,
.dig_thr = 1,
.dig_thr_mode = 1,
.dig_2ndo_sdm_mode = 0,
.dig_hs_rate = 0, /* Not in TRM preferred settings */
.dig_ovrd_hs_rate = 0, /* Not in TRM preferred settings */
.dll_trim_sel = 0x1,
.dll_phint_rate = 0x2, /* for 1.5 GHz DPLL clock */
.eq_lev = 0,
.eq_ftc = 0x1f,
.eq_ctl = 0,
.eq_ovrd_lev = 1,
.eq_ovrd_ftc = 1,
},
};
static struct pipe3_data data_pcie = {
.mode = PIPE3_MODE_PCIE,
.settings = {
/* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */
.ana_interface = INTERFACE_MODE_PCIE,
.ana_losd = 0xa,
.dig_fastlock = 1,
.dig_lbw = 3,
.dig_stepcnt = 0,
.dig_stl = 0x3,
.dig_thr = 1,
.dig_thr_mode = 1,
.dig_2ndo_sdm_mode = 0,
.dig_hs_rate = 0,
.dig_ovrd_hs_rate = 0,
.dll_trim_sel = 0x2,
.dll_phint_rate = 0x3,
.eq_lev = 0,
.eq_ftc = 0x1f,
.eq_ctl = 1,
.eq_ovrd_lev = 0,
.eq_ovrd_ftc = 0,
},
};
static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
{
return __raw_readl(addr + offset);
}
static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
u32 data)
{
__raw_writel(data, addr + offset);
}
static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
{
unsigned long rate;
struct pipe3_dpll_map *dpll_map = phy->dpll_map;
rate = clk_get_rate(phy->sys_clk);
for (; dpll_map->rate; dpll_map++) {
if (rate == dpll_map->rate)
return &dpll_map->params;
}
dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
return NULL;
}
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
static int ti_pipe3_power_off(struct phy *x)
{
int ret;
struct ti_pipe3 *phy = phy_get_drvdata(x);
if (!phy->phy_power_syscon) {
omap_control_phy_power(phy->control_dev, 0);
return 0;
}
ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0);
return ret;
}
static void ti_pipe3_calibrate(struct ti_pipe3 *phy);
static int ti_pipe3_power_on(struct phy *x)
{
u32 val;
u32 mask;
unsigned long rate;
struct ti_pipe3 *phy = phy_get_drvdata(x);
bool rx_pending = false;
if (!phy->phy_power_syscon) {
omap_control_phy_power(phy->control_dev, 1);
return 0;
}
rate = clk_get_rate(phy->sys_clk);
if (!rate) {
dev_err(phy->dev, "Invalid clock rate\n");
return -EINVAL;
}
rate = rate / 1000000;
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
mask, val);
/*
* For PCIe, TX and RX must be powered on simultaneously.
* For USB and SATA, TX must be powered on before RX
*/
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) {
val = PIPE3_PHY_TX_POWERON;
rx_pending = true;
} else {
val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
}
regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
mask, val);
if (rx_pending) {
val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
mask, val);
}
if (phy->mode == PIPE3_MODE_PCIE)
ti_pipe3_calibrate(phy);
return 0;
}
static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
{
u32 val;
unsigned long timeout;
timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
do {
cpu_relax();
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if (val & PLL_LOCK)
return 0;
} while (!time_after(jiffies, timeout));
dev_err(phy->dev, "DPLL failed to lock\n");
return -EBUSY;
}
static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
{
u32 val;
struct pipe3_dpll_params *dpll_params;
dpll_params = ti_pipe3_get_dpll_params(phy);
if (!dpll_params)
return -EINVAL;
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGN_MASK;
val |= dpll_params->n << PLL_REGN_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val &= ~PLL_SELFREQDCO_MASK;
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGM_MASK;
val |= dpll_params->m << PLL_REGM_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
val &= ~PLL_REGM_F_MASK;
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
val &= ~PLL_SD_MASK;
val |= dpll_params->sd << PLL_SD_SHIFT;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
return ti_pipe3_dpll_wait_lock(phy);
}
static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
{
u32 val;
struct pipe3_settings *s = &phy->settings;
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY);
val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT);
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES);
val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK |
MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK |
MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE);
val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT |
s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT |
s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT |
s->dig_lbw << MEM_CDR_LBW_SHIFT |
s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT |
s->dig_stl << MEM_CDR_STL_SHIFT |
s->dig_thr << MEM_CDR_THR_SHIFT |
s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT |
s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM);
val &= ~MEM_DLL_TRIM_SEL_MASK;
val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL);
val &= ~MEM_DLL_PHINT_RATE_MASK;
val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val);
val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER);
val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK |
MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
val |= s->eq_lev << MEM_EQLEV_SHIFT |
s->eq_ftc << MEM_EQFTC_SHIFT |
s->eq_ctl << MEM_EQCTL_SHIFT |
s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT |
s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT;
ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val);
if (phy->mode == PIPE3_MODE_SATA) {
val = ti_pipe3_readl(phy->phy_rx,
SATA_PHY_RX_IO_AND_A2D_OVERRIDES);
val &= ~MEM_CDR_LOS_SOURCE_MASK;
ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES,
val);
}
}
static int ti_pipe3_init(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
u32 val;
int ret = 0;
ti_pipe3_enable_clocks(phy);
/*
* Set pcie_pcs register to 0x96 for proper functioning of phy
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
* 18-1804.
*/
if (phy->mode == PIPE3_MODE_PCIE) {
if (!phy->pcs_syscon) {
omap_control_pcie_pcs(phy->control_dev, 0x96);
return 0;
}
val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
PCIE_PCS_MASK, val);
return ret;
}
/* Bring it out of IDLE if it is IDLE */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
if (val & PLL_IDLE) {
val &= ~PLL_IDLE;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
ret = ti_pipe3_dpll_wait_lock(phy);
}
/* SATA has issues if re-programmed when locked */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA)
return ret;
/* Program the DPLL */
ret = ti_pipe3_dpll_program(phy);
if (ret) {
ti_pipe3_disable_clocks(phy);
return -EINVAL;
}
ti_pipe3_calibrate(phy);
return ret;
}
static int ti_pipe3_exit(struct phy *x)
{
struct ti_pipe3 *phy = phy_get_drvdata(x);
u32 val;
unsigned long timeout;
/* If dpll_reset_syscon is not present we wont power down SATA DPLL
* due to Errata i783
*/
if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon)
return 0;
/* PCIe doesn't have internal DPLL */
if (phy->mode != PIPE3_MODE_PCIE) {
/* Put DPLL in IDLE mode */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val |= PLL_IDLE;
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
/* wait for LDO and Oscillator to power down */
timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
do {
cpu_relax();
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
break;
} while (!time_after(jiffies, timeout));
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
val);
return -EBUSY;
}
}
/* i783: SATA needs control bit toggle after PLL unlock */
if (phy->mode == PIPE3_MODE_SATA) {
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
SATA_PLL_SOFT_RESET, 0);
}
ti_pipe3_disable_clocks(phy);
return 0;
}
static const struct phy_ops ops = {
.init = ti_pipe3_init,
.exit = ti_pipe3_exit,
.power_on = ti_pipe3_power_on,
.power_off = ti_pipe3_power_off,
.owner = THIS_MODULE,
};
static const struct of_device_id ti_pipe3_id_table[];
static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
{
struct clk *clk;
struct device *dev = phy->dev;
phy->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(phy->refclk)) {
dev_err(dev, "unable to get refclk\n");
/* older DTBs have missing refclk in SATA PHY
* so don't bail out in case of SATA PHY.
*/
if (phy->mode != PIPE3_MODE_SATA)
return PTR_ERR(phy->refclk);
}
if (phy->mode != PIPE3_MODE_SATA) {
phy->wkupclk = devm_clk_get(dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
dev_err(dev, "unable to get wkupclk\n");
return PTR_ERR(phy->wkupclk);
}
} else {
phy->wkupclk = ERR_PTR(-ENODEV);
}
if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) {
phy->sys_clk = devm_clk_get(dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
dev_err(dev, "unable to get sysclk\n");
return -EINVAL;
}
}
if (phy->mode == PIPE3_MODE_PCIE) {
clk = devm_clk_get(dev, "dpll_ref");
if (IS_ERR(clk)) {
dev_err(dev, "unable to get dpll ref clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 1500000000);
clk = devm_clk_get(dev, "dpll_ref_m2");
if (IS_ERR(clk)) {
dev_err(dev, "unable to get dpll ref m2 clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
clk = devm_clk_get(dev, "phy-div");
if (IS_ERR(clk)) {
dev_err(dev, "unable to get phy-div clk\n");
return PTR_ERR(clk);
}
clk_set_rate(clk, 100000000);
phy->div_clk = devm_clk_get(dev, "div-clk");
if (IS_ERR(phy->div_clk)) {
dev_err(dev, "unable to get div-clk\n");
return PTR_ERR(phy->div_clk);
}
} else {
phy->div_clk = ERR_PTR(-ENODEV);
}
return 0;
}
static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
{
struct device *dev = phy->dev;
struct device_node *node = dev->of_node;
struct device_node *control_node;
struct platform_device *control_pdev;
phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-phy-power");
if (IS_ERR(phy->phy_power_syscon)) {
dev_dbg(dev,
"can't get syscon-phy-power, using control device\n");
phy->phy_power_syscon = NULL;
} else {
if (of_property_read_u32_index(node,
"syscon-phy-power", 1,
&phy->power_reg)) {
dev_err(dev, "couldn't get power reg. offset\n");
return -EINVAL;
}
}
if (!phy->phy_power_syscon) {
control_node = of_parse_phandle(node, "ctrl-module", 0);
if (!control_node) {
dev_err(dev, "Failed to get control device phandle\n");
return -EINVAL;
}
control_pdev = of_find_device_by_node(control_node);
of_node_put(control_node);
if (!control_pdev) {
dev_err(dev, "Failed to get control device\n");
return -EINVAL;
}
phy->control_dev = &control_pdev->dev;
}
if (phy->mode == PIPE3_MODE_PCIE) {
phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-pcs");
if (IS_ERR(phy->pcs_syscon)) {
dev_dbg(dev,
"can't get syscon-pcs, using omap control\n");
phy->pcs_syscon = NULL;
} else {
if (of_property_read_u32_index(node,
"syscon-pcs", 1,
&phy->pcie_pcs_reg)) {
dev_err(dev,
"couldn't get pcie pcs reg. offset\n");
return -EINVAL;
}
}
}
if (phy->mode == PIPE3_MODE_SATA) {
phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
"syscon-pllreset");
if (IS_ERR(phy->dpll_reset_syscon)) {
dev_info(dev,
"can't get syscon-pllreset, sata dpll won't idle\n");
phy->dpll_reset_syscon = NULL;
} else {
if (of_property_read_u32_index(node,
"syscon-pllreset", 1,
&phy->dpll_reset_reg)) {
dev_err(dev,
"couldn't get pllreset reg. offset\n");
return -EINVAL;
}
}
}
return 0;
}
static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
{
struct device *dev = phy->dev;
struct platform_device *pdev = to_platform_device(dev);
phy->phy_rx = devm_platform_ioremap_resource_byname(pdev, "phy_rx");
if (IS_ERR(phy->phy_rx))
return PTR_ERR(phy->phy_rx);
phy->phy_tx = devm_platform_ioremap_resource_byname(pdev, "phy_tx");
return PTR_ERR_OR_ZERO(phy->phy_tx);
}
static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
{
struct device *dev = phy->dev;
struct platform_device *pdev = to_platform_device(dev);
if (phy->mode == PIPE3_MODE_PCIE)
return 0;
phy->pll_ctrl_base =
devm_platform_ioremap_resource_byname(pdev, "pll_ctrl");
return PTR_ERR_OR_ZERO(phy->pll_ctrl_base);
}
static int ti_pipe3_probe(struct platform_device *pdev)
{
struct ti_pipe3 *phy;
struct phy *generic_phy;
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
int ret;
const struct of_device_id *match;
struct pipe3_data *data;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
match = of_match_device(ti_pipe3_id_table, dev);
if (!match)
return -EINVAL;
data = (struct pipe3_data *)match->data;
if (!data) {
dev_err(dev, "no driver data\n");
return -EINVAL;
}
phy->dev = dev;
phy->mode = data->mode;
phy->dpll_map = data->dpll_map;
phy->settings = data->settings;
ret = ti_pipe3_get_pll_base(phy);
if (ret)
return ret;
ret = ti_pipe3_get_tx_rx_base(phy);
if (ret)
return ret;
ret = ti_pipe3_get_sysctrl(phy);
if (ret)
return ret;
ret = ti_pipe3_get_clk(phy);
if (ret)
return ret;
platform_set_drvdata(pdev, phy);
pm_runtime_enable(dev);
/*
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
*/
if (phy->mode == PIPE3_MODE_SATA) {
if (!IS_ERR(phy->refclk)) {
clk_prepare_enable(phy->refclk);
phy->sata_refclk_enabled = true;
}
}
generic_phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(generic_phy))
return PTR_ERR(generic_phy);
phy_set_drvdata(generic_phy, phy);
ti_pipe3_power_off(generic_phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static int ti_pipe3_remove(struct platform_device *pdev)
{
struct ti_pipe3 *phy = platform_get_drvdata(pdev);
if (phy->mode == PIPE3_MODE_SATA) {
clk_disable_unprepare(phy->refclk);
phy->sata_refclk_enabled = false;
}
pm_runtime_disable(&pdev->dev);
return 0;
}
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
{
int ret = 0;
if (!IS_ERR(phy->refclk)) {
ret = clk_prepare_enable(phy->refclk);
if (ret) {
dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
return ret;
}
}
if (!IS_ERR(phy->wkupclk)) {
ret = clk_prepare_enable(phy->wkupclk);
if (ret) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto disable_refclk;
}
}
if (!IS_ERR(phy->div_clk)) {
ret = clk_prepare_enable(phy->div_clk);
if (ret) {
dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
goto disable_wkupclk;
}
}
return 0;
disable_wkupclk:
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
disable_refclk:
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
return ret;
}
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
{
if (!IS_ERR(phy->wkupclk))
clk_disable_unprepare(phy->wkupclk);
if (!IS_ERR(phy->refclk))
clk_disable_unprepare(phy->refclk);
if (!IS_ERR(phy->div_clk))
clk_disable_unprepare(phy->div_clk);
}
static const struct of_device_id ti_pipe3_id_table[] = {
{
.compatible = "ti,phy-usb3",
.data = &data_usb,
},
{
.compatible = "ti,omap-usb3",
.data = &data_usb,
},
{
.compatible = "ti,phy-pipe3-sata",
.data = &data_sata,
},
{
.compatible = "ti,phy-pipe3-pcie",
.data = &data_pcie,
},
{}
};
MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
static struct platform_driver ti_pipe3_driver = {
.probe = ti_pipe3_probe,
.remove = ti_pipe3_remove,
.driver = {
.name = "ti-pipe3",
.of_match_table = ti_pipe3_id_table,
},
};
module_platform_driver(ti_pipe3_driver);
MODULE_ALIAS("platform:ti_pipe3");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("TI PIPE3 phy driver");
MODULE_LICENSE("GPL v2");