| /* |
| * processor_perflib.c - ACPI Processor P-States Library ($Revision: 71 $) |
| * |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> |
| * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> |
| * - Added processor hotplug support |
| * |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/cpufreq.h> |
| #include <linux/slab.h> |
| #include <linux/acpi.h> |
| #include <acpi/processor.h> |
| #ifdef CONFIG_X86 |
| #include <asm/cpufeature.h> |
| #endif |
| |
| #define PREFIX "ACPI: " |
| |
| #define ACPI_PROCESSOR_CLASS "processor" |
| #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" |
| #define _COMPONENT ACPI_PROCESSOR_COMPONENT |
| ACPI_MODULE_NAME("processor_perflib"); |
| |
| static DEFINE_MUTEX(performance_mutex); |
| |
| /* |
| * _PPC support is implemented as a CPUfreq policy notifier: |
| * This means each time a CPUfreq driver registered also with |
| * the ACPI core is asked to change the speed policy, the maximum |
| * value is adjusted so that it is within the platform limit. |
| * |
| * Also, when a new platform limit value is detected, the CPUfreq |
| * policy is adjusted accordingly. |
| */ |
| |
| /* ignore_ppc: |
| * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet |
| * ignore _PPC |
| * 0 -> cpufreq low level drivers initialized -> consider _PPC values |
| * 1 -> ignore _PPC totally -> forced by user through boot param |
| */ |
| static int ignore_ppc = -1; |
| module_param(ignore_ppc, int, 0644); |
| MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ |
| "limited by BIOS, this should help"); |
| |
| #define PPC_REGISTERED 1 |
| #define PPC_IN_USE 2 |
| |
| static int acpi_processor_ppc_status; |
| |
| static int acpi_processor_ppc_notifier(struct notifier_block *nb, |
| unsigned long event, void *data) |
| { |
| struct cpufreq_policy *policy = data; |
| struct acpi_processor *pr; |
| unsigned int ppc = 0; |
| |
| if (event == CPUFREQ_START && ignore_ppc <= 0) { |
| ignore_ppc = 0; |
| return 0; |
| } |
| |
| if (ignore_ppc) |
| return 0; |
| |
| if (event != CPUFREQ_INCOMPATIBLE) |
| return 0; |
| |
| mutex_lock(&performance_mutex); |
| |
| pr = per_cpu(processors, policy->cpu); |
| if (!pr || !pr->performance) |
| goto out; |
| |
| ppc = (unsigned int)pr->performance_platform_limit; |
| |
| if (ppc >= pr->performance->state_count) |
| goto out; |
| |
| cpufreq_verify_within_limits(policy, 0, |
| pr->performance->states[ppc]. |
| core_frequency * 1000); |
| |
| out: |
| mutex_unlock(&performance_mutex); |
| |
| return 0; |
| } |
| |
| static struct notifier_block acpi_ppc_notifier_block = { |
| .notifier_call = acpi_processor_ppc_notifier, |
| }; |
| |
| static int acpi_processor_get_platform_limit(struct acpi_processor *pr) |
| { |
| acpi_status status = 0; |
| unsigned long long ppc = 0; |
| |
| |
| if (!pr) |
| return -EINVAL; |
| |
| /* |
| * _PPC indicates the maximum state currently supported by the platform |
| * (e.g. 0 = states 0..n; 1 = states 1..n; etc. |
| */ |
| status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc); |
| |
| if (status != AE_NOT_FOUND) |
| acpi_processor_ppc_status |= PPC_IN_USE; |
| |
| if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC")); |
| return -ENODEV; |
| } |
| |
| pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id, |
| (int)ppc, ppc ? "" : "not"); |
| |
| pr->performance_platform_limit = (int)ppc; |
| |
| return 0; |
| } |
| |
| #define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80 |
| /* |
| * acpi_processor_ppc_ost: Notify firmware the _PPC evaluation status |
| * @handle: ACPI processor handle |
| * @status: the status code of _PPC evaluation |
| * 0: success. OSPM is now using the performance state specificed. |
| * 1: failure. OSPM has not changed the number of P-states in use |
| */ |
| static void acpi_processor_ppc_ost(acpi_handle handle, int status) |
| { |
| if (acpi_has_method(handle, "_OST")) |
| acpi_evaluate_ost(handle, ACPI_PROCESSOR_NOTIFY_PERFORMANCE, |
| status, NULL); |
| } |
| |
| int acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag) |
| { |
| int ret; |
| |
| if (ignore_ppc) { |
| /* |
| * Only when it is notification event, the _OST object |
| * will be evaluated. Otherwise it is skipped. |
| */ |
| if (event_flag) |
| acpi_processor_ppc_ost(pr->handle, 1); |
| return 0; |
| } |
| |
| ret = acpi_processor_get_platform_limit(pr); |
| /* |
| * Only when it is notification event, the _OST object |
| * will be evaluated. Otherwise it is skipped. |
| */ |
| if (event_flag) { |
| if (ret < 0) |
| acpi_processor_ppc_ost(pr->handle, 1); |
| else |
| acpi_processor_ppc_ost(pr->handle, 0); |
| } |
| if (ret < 0) |
| return (ret); |
| else |
| return cpufreq_update_policy(pr->id); |
| } |
| |
| int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) |
| { |
| struct acpi_processor *pr; |
| |
| pr = per_cpu(processors, cpu); |
| if (!pr || !pr->performance || !pr->performance->state_count) |
| return -ENODEV; |
| *limit = pr->performance->states[pr->performance_platform_limit]. |
| core_frequency * 1000; |
| return 0; |
| } |
| EXPORT_SYMBOL(acpi_processor_get_bios_limit); |
| |
| void acpi_processor_ppc_init(void) |
| { |
| if (!cpufreq_register_notifier |
| (&acpi_ppc_notifier_block, CPUFREQ_POLICY_NOTIFIER)) |
| acpi_processor_ppc_status |= PPC_REGISTERED; |
| else |
| printk(KERN_DEBUG |
| "Warning: Processor Platform Limit not supported.\n"); |
| } |
| |
| void acpi_processor_ppc_exit(void) |
| { |
| if (acpi_processor_ppc_status & PPC_REGISTERED) |
| cpufreq_unregister_notifier(&acpi_ppc_notifier_block, |
| CPUFREQ_POLICY_NOTIFIER); |
| |
| acpi_processor_ppc_status &= ~PPC_REGISTERED; |
| } |
| |
| static int acpi_processor_get_performance_control(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = 0; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *pct = NULL; |
| union acpi_object obj = { 0 }; |
| |
| |
| status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PCT")); |
| return -ENODEV; |
| } |
| |
| pct = (union acpi_object *)buffer.pointer; |
| if (!pct || (pct->type != ACPI_TYPE_PACKAGE) |
| || (pct->package.count != 2)) { |
| printk(KERN_ERR PREFIX "Invalid _PCT data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| /* |
| * control_register |
| */ |
| |
| obj = pct->package.elements[0]; |
| |
| if ((obj.type != ACPI_TYPE_BUFFER) |
| || (obj.buffer.length < sizeof(struct acpi_pct_register)) |
| || (obj.buffer.pointer == NULL)) { |
| printk(KERN_ERR PREFIX "Invalid _PCT data (control_register)\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| memcpy(&pr->performance->control_register, obj.buffer.pointer, |
| sizeof(struct acpi_pct_register)); |
| |
| /* |
| * status_register |
| */ |
| |
| obj = pct->package.elements[1]; |
| |
| if ((obj.type != ACPI_TYPE_BUFFER) |
| || (obj.buffer.length < sizeof(struct acpi_pct_register)) |
| || (obj.buffer.pointer == NULL)) { |
| printk(KERN_ERR PREFIX "Invalid _PCT data (status_register)\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| memcpy(&pr->performance->status_register, obj.buffer.pointer, |
| sizeof(struct acpi_pct_register)); |
| |
| end: |
| kfree(buffer.pointer); |
| |
| return result; |
| } |
| |
| #ifdef CONFIG_X86 |
| /* |
| * Some AMDs have 50MHz frequency multiples, but only provide 100MHz rounding |
| * in their ACPI data. Calculate the real values and fix up the _PSS data. |
| */ |
| static void amd_fixup_frequency(struct acpi_processor_px *px, int i) |
| { |
| u32 hi, lo, fid, did; |
| int index = px->control & 0x00000007; |
| |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) |
| return; |
| |
| if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) |
| || boot_cpu_data.x86 == 0x11) { |
| rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi); |
| /* |
| * MSR C001_0064+: |
| * Bit 63: PstateEn. Read-write. If set, the P-state is valid. |
| */ |
| if (!(hi & BIT(31))) |
| return; |
| |
| fid = lo & 0x3f; |
| did = (lo >> 6) & 7; |
| if (boot_cpu_data.x86 == 0x10) |
| px->core_frequency = (100 * (fid + 0x10)) >> did; |
| else |
| px->core_frequency = (100 * (fid + 8)) >> did; |
| } |
| } |
| #else |
| static void amd_fixup_frequency(struct acpi_processor_px *px, int i) {}; |
| #endif |
| |
| static int acpi_processor_get_performance_states(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_buffer format = { sizeof("NNNNNN"), "NNNNNN" }; |
| struct acpi_buffer state = { 0, NULL }; |
| union acpi_object *pss = NULL; |
| int i; |
| int last_invalid = -1; |
| |
| |
| status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PSS")); |
| return -ENODEV; |
| } |
| |
| pss = buffer.pointer; |
| if (!pss || (pss->type != ACPI_TYPE_PACKAGE)) { |
| printk(KERN_ERR PREFIX "Invalid _PSS data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d performance states\n", |
| pss->package.count)); |
| |
| pr->performance->state_count = pss->package.count; |
| pr->performance->states = |
| kmalloc(sizeof(struct acpi_processor_px) * pss->package.count, |
| GFP_KERNEL); |
| if (!pr->performance->states) { |
| result = -ENOMEM; |
| goto end; |
| } |
| |
| for (i = 0; i < pr->performance->state_count; i++) { |
| |
| struct acpi_processor_px *px = &(pr->performance->states[i]); |
| |
| state.length = sizeof(struct acpi_processor_px); |
| state.pointer = px; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i)); |
| |
| status = acpi_extract_package(&(pss->package.elements[i]), |
| &format, &state); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Invalid _PSS data")); |
| result = -EFAULT; |
| kfree(pr->performance->states); |
| goto end; |
| } |
| |
| amd_fixup_frequency(px, i); |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n", |
| i, |
| (u32) px->core_frequency, |
| (u32) px->power, |
| (u32) px->transition_latency, |
| (u32) px->bus_master_latency, |
| (u32) px->control, (u32) px->status)); |
| |
| /* |
| * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq |
| */ |
| if (!px->core_frequency || |
| ((u32)(px->core_frequency * 1000) != |
| (px->core_frequency * 1000))) { |
| printk(KERN_ERR FW_BUG PREFIX |
| "Invalid BIOS _PSS frequency found for processor %d: 0x%llx MHz\n", |
| pr->id, px->core_frequency); |
| if (last_invalid == -1) |
| last_invalid = i; |
| } else { |
| if (last_invalid != -1) { |
| /* |
| * Copy this valid entry over last_invalid entry |
| */ |
| memcpy(&(pr->performance->states[last_invalid]), |
| px, sizeof(struct acpi_processor_px)); |
| ++last_invalid; |
| } |
| } |
| } |
| |
| if (last_invalid == 0) { |
| printk(KERN_ERR FW_BUG PREFIX |
| "No valid BIOS _PSS frequency found for processor %d\n", pr->id); |
| result = -EFAULT; |
| kfree(pr->performance->states); |
| pr->performance->states = NULL; |
| } |
| |
| if (last_invalid > 0) |
| pr->performance->state_count = last_invalid; |
| |
| end: |
| kfree(buffer.pointer); |
| |
| return result; |
| } |
| |
| int acpi_processor_get_performance_info(struct acpi_processor *pr) |
| { |
| int result = 0; |
| |
| if (!pr || !pr->performance || !pr->handle) |
| return -EINVAL; |
| |
| if (!acpi_has_method(pr->handle, "_PCT")) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "ACPI-based processor performance control unavailable\n")); |
| return -ENODEV; |
| } |
| |
| result = acpi_processor_get_performance_control(pr); |
| if (result) |
| goto update_bios; |
| |
| result = acpi_processor_get_performance_states(pr); |
| if (result) |
| goto update_bios; |
| |
| /* We need to call _PPC once when cpufreq starts */ |
| if (ignore_ppc != 1) |
| result = acpi_processor_get_platform_limit(pr); |
| |
| return result; |
| |
| /* |
| * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that |
| * the BIOS is older than the CPU and does not know its frequencies |
| */ |
| update_bios: |
| #ifdef CONFIG_X86 |
| if (acpi_has_method(pr->handle, "_PPC")) { |
| if(boot_cpu_has(X86_FEATURE_EST)) |
| printk(KERN_WARNING FW_BUG "BIOS needs update for CPU " |
| "frequency support\n"); |
| } |
| #endif |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info); |
| int acpi_processor_notify_smm(struct module *calling_module) |
| { |
| acpi_status status; |
| static int is_done = 0; |
| |
| |
| if (!(acpi_processor_ppc_status & PPC_REGISTERED)) |
| return -EBUSY; |
| |
| if (!try_module_get(calling_module)) |
| return -EINVAL; |
| |
| /* is_done is set to negative if an error occurred, |
| * and to postitive if _no_ error occurred, but SMM |
| * was already notified. This avoids double notification |
| * which might lead to unexpected results... |
| */ |
| if (is_done > 0) { |
| module_put(calling_module); |
| return 0; |
| } else if (is_done < 0) { |
| module_put(calling_module); |
| return is_done; |
| } |
| |
| is_done = -EIO; |
| |
| /* Can't write pstate_control to smi_command if either value is zero */ |
| if ((!acpi_gbl_FADT.smi_command) || (!acpi_gbl_FADT.pstate_control)) { |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_control\n")); |
| module_put(calling_module); |
| return 0; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, |
| "Writing pstate_control [0x%x] to smi_command [0x%x]\n", |
| acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command)); |
| |
| status = acpi_os_write_port(acpi_gbl_FADT.smi_command, |
| (u32) acpi_gbl_FADT.pstate_control, 8); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "Failed to write pstate_control [0x%x] to " |
| "smi_command [0x%x]", acpi_gbl_FADT.pstate_control, |
| acpi_gbl_FADT.smi_command)); |
| module_put(calling_module); |
| return status; |
| } |
| |
| /* Success. If there's no _PPC, we need to fear nothing, so |
| * we can allow the cpufreq driver to be rmmod'ed. */ |
| is_done = 1; |
| |
| if (!(acpi_processor_ppc_status & PPC_IN_USE)) |
| module_put(calling_module); |
| |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(acpi_processor_notify_smm); |
| |
| static int acpi_processor_get_psd(struct acpi_processor *pr) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; |
| struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"}; |
| struct acpi_buffer state = {0, NULL}; |
| union acpi_object *psd = NULL; |
| struct acpi_psd_package *pdomain; |
| |
| status = acpi_evaluate_object(pr->handle, "_PSD", NULL, &buffer); |
| if (ACPI_FAILURE(status)) { |
| return -ENODEV; |
| } |
| |
| psd = buffer.pointer; |
| if (!psd || (psd->type != ACPI_TYPE_PACKAGE)) { |
| printk(KERN_ERR PREFIX "Invalid _PSD data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (psd->package.count != 1) { |
| printk(KERN_ERR PREFIX "Invalid _PSD data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| pdomain = &(pr->performance->domain_info); |
| |
| state.length = sizeof(struct acpi_psd_package); |
| state.pointer = pdomain; |
| |
| status = acpi_extract_package(&(psd->package.elements[0]), |
| &format, &state); |
| if (ACPI_FAILURE(status)) { |
| printk(KERN_ERR PREFIX "Invalid _PSD data\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) { |
| printk(KERN_ERR PREFIX "Unknown _PSD:num_entries\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (pdomain->revision != ACPI_PSD_REV0_REVISION) { |
| printk(KERN_ERR PREFIX "Unknown _PSD:revision\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| |
| if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL && |
| pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY && |
| pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) { |
| printk(KERN_ERR PREFIX "Invalid _PSD:coord_type\n"); |
| result = -EFAULT; |
| goto end; |
| } |
| end: |
| kfree(buffer.pointer); |
| return result; |
| } |
| |
| int acpi_processor_preregister_performance( |
| struct acpi_processor_performance __percpu *performance) |
| { |
| int count_target; |
| int retval = 0; |
| unsigned int i, j; |
| cpumask_var_t covered_cpus; |
| struct acpi_processor *pr; |
| struct acpi_psd_package *pdomain; |
| struct acpi_processor *match_pr; |
| struct acpi_psd_package *match_pdomain; |
| |
| if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| mutex_lock(&performance_mutex); |
| |
| /* |
| * Check if another driver has already registered, and abort before |
| * changing pr->performance if it has. Check input data as well. |
| */ |
| for_each_possible_cpu(i) { |
| pr = per_cpu(processors, i); |
| if (!pr) { |
| /* Look only at processors in ACPI namespace */ |
| continue; |
| } |
| |
| if (pr->performance) { |
| retval = -EBUSY; |
| goto err_out; |
| } |
| |
| if (!performance || !per_cpu_ptr(performance, i)) { |
| retval = -EINVAL; |
| goto err_out; |
| } |
| } |
| |
| /* Call _PSD for all CPUs */ |
| for_each_possible_cpu(i) { |
| pr = per_cpu(processors, i); |
| if (!pr) |
| continue; |
| |
| pr->performance = per_cpu_ptr(performance, i); |
| cpumask_set_cpu(i, pr->performance->shared_cpu_map); |
| if (acpi_processor_get_psd(pr)) { |
| retval = -EINVAL; |
| continue; |
| } |
| } |
| if (retval) |
| goto err_ret; |
| |
| /* |
| * Now that we have _PSD data from all CPUs, lets setup P-state |
| * domain info. |
| */ |
| for_each_possible_cpu(i) { |
| pr = per_cpu(processors, i); |
| if (!pr) |
| continue; |
| |
| if (cpumask_test_cpu(i, covered_cpus)) |
| continue; |
| |
| pdomain = &(pr->performance->domain_info); |
| cpumask_set_cpu(i, pr->performance->shared_cpu_map); |
| cpumask_set_cpu(i, covered_cpus); |
| if (pdomain->num_processors <= 1) |
| continue; |
| |
| /* Validate the Domain info */ |
| count_target = pdomain->num_processors; |
| if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL) |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL; |
| else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL) |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_HW; |
| else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY) |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ANY; |
| |
| for_each_possible_cpu(j) { |
| if (i == j) |
| continue; |
| |
| match_pr = per_cpu(processors, j); |
| if (!match_pr) |
| continue; |
| |
| match_pdomain = &(match_pr->performance->domain_info); |
| if (match_pdomain->domain != pdomain->domain) |
| continue; |
| |
| /* Here i and j are in the same domain */ |
| |
| if (match_pdomain->num_processors != count_target) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| |
| if (pdomain->coord_type != match_pdomain->coord_type) { |
| retval = -EINVAL; |
| goto err_ret; |
| } |
| |
| cpumask_set_cpu(j, covered_cpus); |
| cpumask_set_cpu(j, pr->performance->shared_cpu_map); |
| } |
| |
| for_each_possible_cpu(j) { |
| if (i == j) |
| continue; |
| |
| match_pr = per_cpu(processors, j); |
| if (!match_pr) |
| continue; |
| |
| match_pdomain = &(match_pr->performance->domain_info); |
| if (match_pdomain->domain != pdomain->domain) |
| continue; |
| |
| match_pr->performance->shared_type = |
| pr->performance->shared_type; |
| cpumask_copy(match_pr->performance->shared_cpu_map, |
| pr->performance->shared_cpu_map); |
| } |
| } |
| |
| err_ret: |
| for_each_possible_cpu(i) { |
| pr = per_cpu(processors, i); |
| if (!pr || !pr->performance) |
| continue; |
| |
| /* Assume no coordination on any error parsing domain info */ |
| if (retval) { |
| cpumask_clear(pr->performance->shared_cpu_map); |
| cpumask_set_cpu(i, pr->performance->shared_cpu_map); |
| pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL; |
| } |
| pr->performance = NULL; /* Will be set for real in register */ |
| } |
| |
| err_out: |
| mutex_unlock(&performance_mutex); |
| free_cpumask_var(covered_cpus); |
| return retval; |
| } |
| EXPORT_SYMBOL(acpi_processor_preregister_performance); |
| |
| int |
| acpi_processor_register_performance(struct acpi_processor_performance |
| *performance, unsigned int cpu) |
| { |
| struct acpi_processor *pr; |
| |
| if (!(acpi_processor_ppc_status & PPC_REGISTERED)) |
| return -EINVAL; |
| |
| mutex_lock(&performance_mutex); |
| |
| pr = per_cpu(processors, cpu); |
| if (!pr) { |
| mutex_unlock(&performance_mutex); |
| return -ENODEV; |
| } |
| |
| if (pr->performance) { |
| mutex_unlock(&performance_mutex); |
| return -EBUSY; |
| } |
| |
| WARN_ON(!performance); |
| |
| pr->performance = performance; |
| |
| if (acpi_processor_get_performance_info(pr)) { |
| pr->performance = NULL; |
| mutex_unlock(&performance_mutex); |
| return -EIO; |
| } |
| |
| mutex_unlock(&performance_mutex); |
| return 0; |
| } |
| |
| EXPORT_SYMBOL(acpi_processor_register_performance); |
| |
| void |
| acpi_processor_unregister_performance(struct acpi_processor_performance |
| *performance, unsigned int cpu) |
| { |
| struct acpi_processor *pr; |
| |
| mutex_lock(&performance_mutex); |
| |
| pr = per_cpu(processors, cpu); |
| if (!pr) { |
| mutex_unlock(&performance_mutex); |
| return; |
| } |
| |
| if (pr->performance) |
| kfree(pr->performance->states); |
| pr->performance = NULL; |
| |
| mutex_unlock(&performance_mutex); |
| |
| return; |
| } |
| |
| EXPORT_SYMBOL(acpi_processor_unregister_performance); |