| /* |
| * Freescale MMA9551L Intelligent Motion-Sensing Platform driver |
| * Copyright (c) 2014, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/events.h> |
| #include <linux/pm_runtime.h> |
| #include "mma9551_core.h" |
| |
| #define MMA9551_DRV_NAME "mma9551" |
| #define MMA9551_IRQ_NAME "mma9551_event" |
| #define MMA9551_GPIO_NAME "mma9551_int" |
| #define MMA9551_GPIO_COUNT 4 |
| |
| /* Tilt application (inclination in IIO terms). */ |
| #define MMA9551_TILT_XZ_ANG_REG 0x00 |
| #define MMA9551_TILT_YZ_ANG_REG 0x01 |
| #define MMA9551_TILT_XY_ANG_REG 0x02 |
| #define MMA9551_TILT_ANGFLG BIT(7) |
| #define MMA9551_TILT_QUAD_REG 0x03 |
| #define MMA9551_TILT_XY_QUAD_SHIFT 0 |
| #define MMA9551_TILT_YZ_QUAD_SHIFT 2 |
| #define MMA9551_TILT_XZ_QUAD_SHIFT 4 |
| #define MMA9551_TILT_CFG_REG 0x01 |
| #define MMA9551_TILT_ANG_THRESH_MASK GENMASK(3, 0) |
| |
| #define MMA9551_DEFAULT_SAMPLE_RATE 122 /* Hz */ |
| |
| /* Tilt events are mapped to the first three GPIO pins. */ |
| enum mma9551_tilt_axis { |
| mma9551_x = 0, |
| mma9551_y, |
| mma9551_z, |
| }; |
| |
| struct mma9551_data { |
| struct i2c_client *client; |
| struct mutex mutex; |
| int event_enabled[3]; |
| int irqs[MMA9551_GPIO_COUNT]; |
| }; |
| |
| static int mma9551_read_incli_chan(struct i2c_client *client, |
| const struct iio_chan_spec *chan, |
| int *val) |
| { |
| u8 quad_shift, angle, quadrant; |
| u16 reg_addr; |
| int ret; |
| |
| switch (chan->channel2) { |
| case IIO_MOD_X: |
| reg_addr = MMA9551_TILT_YZ_ANG_REG; |
| quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT; |
| break; |
| case IIO_MOD_Y: |
| reg_addr = MMA9551_TILT_XZ_ANG_REG; |
| quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT; |
| break; |
| case IIO_MOD_Z: |
| reg_addr = MMA9551_TILT_XY_ANG_REG; |
| quad_shift = MMA9551_TILT_XY_QUAD_SHIFT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = mma9551_set_power_state(client, true); |
| if (ret < 0) |
| return ret; |
| |
| ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, |
| reg_addr, &angle); |
| if (ret < 0) |
| goto out_poweroff; |
| |
| ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, |
| MMA9551_TILT_QUAD_REG, &quadrant); |
| if (ret < 0) |
| goto out_poweroff; |
| |
| angle &= ~MMA9551_TILT_ANGFLG; |
| quadrant = (quadrant >> quad_shift) & 0x03; |
| |
| if (quadrant == 1 || quadrant == 3) |
| *val = 90 * (quadrant + 1) - angle; |
| else |
| *val = angle + 90 * quadrant; |
| |
| ret = IIO_VAL_INT; |
| |
| out_poweroff: |
| mma9551_set_power_state(client, false); |
| return ret; |
| } |
| |
| static int mma9551_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_PROCESSED: |
| switch (chan->type) { |
| case IIO_INCLI: |
| mutex_lock(&data->mutex); |
| ret = mma9551_read_incli_chan(data->client, chan, val); |
| mutex_unlock(&data->mutex); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| case IIO_CHAN_INFO_RAW: |
| switch (chan->type) { |
| case IIO_ACCEL: |
| mutex_lock(&data->mutex); |
| ret = mma9551_read_accel_chan(data->client, |
| chan, val, val2); |
| mutex_unlock(&data->mutex); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->type) { |
| case IIO_ACCEL: |
| return mma9551_read_accel_scale(val, val2); |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma9551_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct mma9551_data *data = iio_priv(indio_dev); |
| |
| switch (chan->type) { |
| case IIO_INCLI: |
| /* IIO counts axes from 1, because IIO_NO_MOD is 0. */ |
| return data->event_enabled[chan->channel2 - 1]; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma9551_config_incli_event(struct iio_dev *indio_dev, |
| enum iio_modifier axis, |
| int state) |
| { |
| struct mma9551_data *data = iio_priv(indio_dev); |
| enum mma9551_tilt_axis mma_axis; |
| int ret; |
| |
| /* IIO counts axes from 1, because IIO_NO_MOD is 0. */ |
| mma_axis = axis - 1; |
| |
| if (data->event_enabled[mma_axis] == state) |
| return 0; |
| |
| if (state == 0) { |
| ret = mma9551_gpio_config(data->client, |
| (enum mma9551_gpio_pin)mma_axis, |
| MMA9551_APPID_NONE, 0, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = mma9551_set_power_state(data->client, false); |
| if (ret < 0) |
| return ret; |
| } else { |
| int bitnum; |
| |
| /* Bit 7 of each angle register holds the angle flag. */ |
| switch (axis) { |
| case IIO_MOD_X: |
| bitnum = 7 + 8 * MMA9551_TILT_YZ_ANG_REG; |
| break; |
| case IIO_MOD_Y: |
| bitnum = 7 + 8 * MMA9551_TILT_XZ_ANG_REG; |
| break; |
| case IIO_MOD_Z: |
| bitnum = 7 + 8 * MMA9551_TILT_XY_ANG_REG; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| |
| ret = mma9551_set_power_state(data->client, true); |
| if (ret < 0) |
| return ret; |
| |
| ret = mma9551_gpio_config(data->client, |
| (enum mma9551_gpio_pin)mma_axis, |
| MMA9551_APPID_TILT, bitnum, 0); |
| if (ret < 0) { |
| mma9551_set_power_state(data->client, false); |
| return ret; |
| } |
| } |
| |
| data->event_enabled[mma_axis] = state; |
| |
| return ret; |
| } |
| |
| static int mma9551_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| int state) |
| { |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (chan->type) { |
| case IIO_INCLI: |
| mutex_lock(&data->mutex); |
| ret = mma9551_config_incli_event(indio_dev, |
| chan->channel2, state); |
| mutex_unlock(&data->mutex); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma9551_write_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int val, int val2) |
| { |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (chan->type) { |
| case IIO_INCLI: |
| if (val2 != 0 || val < 1 || val > 10) |
| return -EINVAL; |
| mutex_lock(&data->mutex); |
| ret = mma9551_update_config_bits(data->client, |
| MMA9551_APPID_TILT, |
| MMA9551_TILT_CFG_REG, |
| MMA9551_TILT_ANG_THRESH_MASK, |
| val); |
| mutex_unlock(&data->mutex); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int mma9551_read_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int *val, int *val2) |
| { |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| u8 tmp; |
| |
| switch (chan->type) { |
| case IIO_INCLI: |
| mutex_lock(&data->mutex); |
| ret = mma9551_read_config_byte(data->client, |
| MMA9551_APPID_TILT, |
| MMA9551_TILT_CFG_REG, &tmp); |
| mutex_unlock(&data->mutex); |
| if (ret < 0) |
| return ret; |
| *val = tmp & MMA9551_TILT_ANG_THRESH_MASK; |
| *val2 = 0; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_event_spec mma9551_incli_event = { |
| .type = IIO_EV_TYPE_ROC, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), |
| }; |
| |
| #define MMA9551_INCLI_CHANNEL(axis) { \ |
| .type = IIO_INCLI, \ |
| .modified = 1, \ |
| .channel2 = axis, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ |
| .event_spec = &mma9551_incli_event, \ |
| .num_event_specs = 1, \ |
| } |
| |
| static const struct iio_chan_spec mma9551_channels[] = { |
| MMA9551_ACCEL_CHANNEL(IIO_MOD_X), |
| MMA9551_ACCEL_CHANNEL(IIO_MOD_Y), |
| MMA9551_ACCEL_CHANNEL(IIO_MOD_Z), |
| |
| MMA9551_INCLI_CHANNEL(IIO_MOD_X), |
| MMA9551_INCLI_CHANNEL(IIO_MOD_Y), |
| MMA9551_INCLI_CHANNEL(IIO_MOD_Z), |
| }; |
| |
| static const struct iio_info mma9551_info = { |
| .driver_module = THIS_MODULE, |
| .read_raw = mma9551_read_raw, |
| .read_event_config = mma9551_read_event_config, |
| .write_event_config = mma9551_write_event_config, |
| .read_event_value = mma9551_read_event_value, |
| .write_event_value = mma9551_write_event_value, |
| }; |
| |
| static irqreturn_t mma9551_event_handler(int irq, void *private) |
| { |
| struct iio_dev *indio_dev = private; |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int i, ret, mma_axis = -1; |
| u16 reg; |
| u8 val; |
| |
| mutex_lock(&data->mutex); |
| |
| for (i = 0; i < 3; i++) |
| if (irq == data->irqs[i]) { |
| mma_axis = i; |
| break; |
| } |
| |
| if (mma_axis == -1) { |
| /* IRQ was triggered on 4th line, which we don't use. */ |
| dev_warn(&data->client->dev, |
| "irq triggered on unused line %d\n", data->irqs[3]); |
| goto out; |
| } |
| |
| switch (mma_axis) { |
| case mma9551_x: |
| reg = MMA9551_TILT_YZ_ANG_REG; |
| break; |
| case mma9551_y: |
| reg = MMA9551_TILT_XZ_ANG_REG; |
| break; |
| case mma9551_z: |
| reg = MMA9551_TILT_XY_ANG_REG; |
| break; |
| } |
| |
| /* |
| * Read the angle even though we don't use it, otherwise we |
| * won't get any further interrupts. |
| */ |
| ret = mma9551_read_status_byte(data->client, MMA9551_APPID_TILT, |
| reg, &val); |
| if (ret < 0) { |
| dev_err(&data->client->dev, |
| "error %d reading tilt register in IRQ\n", ret); |
| goto out; |
| } |
| |
| iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_INCLI, 0, (mma_axis + 1), |
| IIO_EV_TYPE_ROC, IIO_EV_DIR_RISING), |
| iio_get_time_ns()); |
| |
| out: |
| mutex_unlock(&data->mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mma9551_init(struct mma9551_data *data) |
| { |
| int ret; |
| |
| ret = mma9551_read_version(data->client); |
| if (ret) |
| return ret; |
| |
| return mma9551_set_device_state(data->client, true); |
| } |
| |
| static int mma9551_gpio_probe(struct iio_dev *indio_dev) |
| { |
| struct gpio_desc *gpio; |
| int i, ret; |
| struct mma9551_data *data = iio_priv(indio_dev); |
| struct device *dev = &data->client->dev; |
| |
| for (i = 0; i < MMA9551_GPIO_COUNT; i++) { |
| gpio = devm_gpiod_get_index(dev, MMA9551_GPIO_NAME, i); |
| if (IS_ERR(gpio)) { |
| dev_err(dev, "acpi gpio get index failed\n"); |
| return PTR_ERR(gpio); |
| } |
| |
| ret = gpiod_direction_input(gpio); |
| if (ret) |
| return ret; |
| |
| data->irqs[i] = gpiod_to_irq(gpio); |
| ret = devm_request_threaded_irq(dev, data->irqs[i], |
| NULL, mma9551_event_handler, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| MMA9551_IRQ_NAME, indio_dev); |
| if (ret < 0) { |
| dev_err(dev, "request irq %d failed\n", data->irqs[i]); |
| return ret; |
| } |
| |
| dev_dbg(dev, "gpio resource, no:%d irq:%d\n", |
| desc_to_gpio(gpio), data->irqs[i]); |
| } |
| |
| return 0; |
| } |
| |
| static const char *mma9551_match_acpi_device(struct device *dev) |
| { |
| const struct acpi_device_id *id; |
| |
| id = acpi_match_device(dev->driver->acpi_match_table, dev); |
| if (!id) |
| return NULL; |
| |
| return dev_name(dev); |
| } |
| |
| static int mma9551_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct mma9551_data *data; |
| struct iio_dev *indio_dev; |
| const char *name = NULL; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| |
| if (id) |
| name = id->name; |
| else if (ACPI_HANDLE(&client->dev)) |
| name = mma9551_match_acpi_device(&client->dev); |
| |
| ret = mma9551_init(data); |
| if (ret < 0) |
| return ret; |
| |
| mutex_init(&data->mutex); |
| |
| indio_dev->dev.parent = &client->dev; |
| indio_dev->channels = mma9551_channels; |
| indio_dev->num_channels = ARRAY_SIZE(mma9551_channels); |
| indio_dev->name = name; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->info = &mma9551_info; |
| |
| ret = mma9551_gpio_probe(indio_dev); |
| if (ret < 0) |
| goto out_poweroff; |
| |
| ret = iio_device_register(indio_dev); |
| if (ret < 0) { |
| dev_err(&client->dev, "unable to register iio device\n"); |
| goto out_poweroff; |
| } |
| |
| ret = pm_runtime_set_active(&client->dev); |
| if (ret < 0) |
| goto out_iio_unregister; |
| |
| pm_runtime_enable(&client->dev); |
| pm_runtime_set_autosuspend_delay(&client->dev, |
| MMA9551_AUTO_SUSPEND_DELAY_MS); |
| pm_runtime_use_autosuspend(&client->dev); |
| |
| return 0; |
| |
| out_iio_unregister: |
| iio_device_unregister(indio_dev); |
| out_poweroff: |
| mma9551_set_device_state(client, false); |
| |
| return ret; |
| } |
| |
| static int mma9551_remove(struct i2c_client *client) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(client); |
| struct mma9551_data *data = iio_priv(indio_dev); |
| |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| pm_runtime_put_noidle(&client->dev); |
| |
| iio_device_unregister(indio_dev); |
| mutex_lock(&data->mutex); |
| mma9551_set_device_state(data->client, false); |
| mutex_unlock(&data->mutex); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int mma9551_runtime_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| ret = mma9551_set_device_state(data->client, false); |
| mutex_unlock(&data->mutex); |
| if (ret < 0) { |
| dev_err(&data->client->dev, "powering off device failed\n"); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| static int mma9551_runtime_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| ret = mma9551_set_device_state(data->client, true); |
| if (ret < 0) |
| return ret; |
| |
| mma9551_sleep(MMA9551_DEFAULT_SAMPLE_RATE); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int mma9551_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| ret = mma9551_set_device_state(data->client, false); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int mma9551_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct mma9551_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| ret = mma9551_set_device_state(data->client, true); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| #endif |
| |
| static const struct dev_pm_ops mma9551_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(mma9551_suspend, mma9551_resume) |
| SET_RUNTIME_PM_OPS(mma9551_runtime_suspend, |
| mma9551_runtime_resume, NULL) |
| }; |
| |
| static const struct acpi_device_id mma9551_acpi_match[] = { |
| {"MMA9551", 0}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(acpi, mma9551_acpi_match); |
| |
| static const struct i2c_device_id mma9551_id[] = { |
| {"mma9551", 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, mma9551_id); |
| |
| static struct i2c_driver mma9551_driver = { |
| .driver = { |
| .name = MMA9551_DRV_NAME, |
| .acpi_match_table = ACPI_PTR(mma9551_acpi_match), |
| .pm = &mma9551_pm_ops, |
| }, |
| .probe = mma9551_probe, |
| .remove = mma9551_remove, |
| .id_table = mma9551_id, |
| }; |
| |
| module_i2c_driver(mma9551_driver); |
| |
| MODULE_AUTHOR("Irina Tirdea <irina.tirdea@intel.com>"); |
| MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MMA9551L motion-sensing platform driver"); |