| /* |
| * Aic94xx SAS/SATA driver sequencer interface. |
| * |
| * Copyright (C) 2005 Adaptec, Inc. All rights reserved. |
| * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com> |
| * |
| * Parts of this code adapted from David Chaw's adp94xx_seq.c. |
| * |
| * This file is licensed under GPLv2. |
| * |
| * This file is part of the aic94xx driver. |
| * |
| * The aic94xx driver is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of the |
| * License. |
| * |
| * The aic94xx driver is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with the aic94xx driver; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gfp.h> |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include "aic94xx_reg.h" |
| #include "aic94xx_hwi.h" |
| |
| #include "aic94xx_seq.h" |
| #include "aic94xx_dump.h" |
| |
| /* It takes no more than 0.05 us for an instruction |
| * to complete. So waiting for 1 us should be more than |
| * plenty. |
| */ |
| #define PAUSE_DELAY 1 |
| #define PAUSE_TRIES 1000 |
| |
| static const struct firmware *sequencer_fw; |
| static u16 cseq_vecs[CSEQ_NUM_VECS], lseq_vecs[LSEQ_NUM_VECS], mode2_task, |
| cseq_idle_loop, lseq_idle_loop; |
| static const u8 *cseq_code, *lseq_code; |
| static u32 cseq_code_size, lseq_code_size; |
| |
| static u16 first_scb_site_no = 0xFFFF; |
| static u16 last_scb_site_no; |
| |
| /* ---------- Pause/Unpause CSEQ/LSEQ ---------- */ |
| |
| /** |
| * asd_pause_cseq - pause the central sequencer |
| * @asd_ha: pointer to host adapter structure |
| * |
| * Return 0 on success, negative on failure. |
| */ |
| static int asd_pause_cseq(struct asd_ha_struct *asd_ha) |
| { |
| int count = PAUSE_TRIES; |
| u32 arp2ctl; |
| |
| arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); |
| if (arp2ctl & PAUSED) |
| return 0; |
| |
| asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl | EPAUSE); |
| do { |
| arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); |
| if (arp2ctl & PAUSED) |
| return 0; |
| udelay(PAUSE_DELAY); |
| } while (--count > 0); |
| |
| ASD_DPRINTK("couldn't pause CSEQ\n"); |
| return -1; |
| } |
| |
| /** |
| * asd_unpause_cseq - unpause the central sequencer. |
| * @asd_ha: pointer to host adapter structure. |
| * |
| * Return 0 on success, negative on error. |
| */ |
| static int asd_unpause_cseq(struct asd_ha_struct *asd_ha) |
| { |
| u32 arp2ctl; |
| int count = PAUSE_TRIES; |
| |
| arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); |
| if (!(arp2ctl & PAUSED)) |
| return 0; |
| |
| asd_write_reg_dword(asd_ha, CARP2CTL, arp2ctl & ~EPAUSE); |
| do { |
| arp2ctl = asd_read_reg_dword(asd_ha, CARP2CTL); |
| if (!(arp2ctl & PAUSED)) |
| return 0; |
| udelay(PAUSE_DELAY); |
| } while (--count > 0); |
| |
| ASD_DPRINTK("couldn't unpause the CSEQ\n"); |
| return -1; |
| } |
| |
| /** |
| * asd_seq_pause_lseq - pause a link sequencer |
| * @asd_ha: pointer to a host adapter structure |
| * @lseq: link sequencer of interest |
| * |
| * Return 0 on success, negative on error. |
| */ |
| static int asd_seq_pause_lseq(struct asd_ha_struct *asd_ha, int lseq) |
| { |
| u32 arp2ctl; |
| int count = PAUSE_TRIES; |
| |
| arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); |
| if (arp2ctl & PAUSED) |
| return 0; |
| |
| asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl | EPAUSE); |
| do { |
| arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); |
| if (arp2ctl & PAUSED) |
| return 0; |
| udelay(PAUSE_DELAY); |
| } while (--count > 0); |
| |
| ASD_DPRINTK("couldn't pause LSEQ %d\n", lseq); |
| return -1; |
| } |
| |
| /** |
| * asd_pause_lseq - pause the link sequencer(s) |
| * @asd_ha: pointer to host adapter structure |
| * @lseq_mask: mask of link sequencers of interest |
| * |
| * Return 0 on success, negative on failure. |
| */ |
| static int asd_pause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask) |
| { |
| int lseq; |
| int err = 0; |
| |
| for_each_sequencer(lseq_mask, lseq_mask, lseq) { |
| err = asd_seq_pause_lseq(asd_ha, lseq); |
| if (err) |
| return err; |
| } |
| |
| return err; |
| } |
| |
| /** |
| * asd_seq_unpause_lseq - unpause a link sequencer |
| * @asd_ha: pointer to host adapter structure |
| * @lseq: link sequencer of interest |
| * |
| * Return 0 on success, negative on error. |
| */ |
| static int asd_seq_unpause_lseq(struct asd_ha_struct *asd_ha, int lseq) |
| { |
| u32 arp2ctl; |
| int count = PAUSE_TRIES; |
| |
| arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); |
| if (!(arp2ctl & PAUSED)) |
| return 0; |
| |
| asd_write_reg_dword(asd_ha, LmARP2CTL(lseq), arp2ctl & ~EPAUSE); |
| do { |
| arp2ctl = asd_read_reg_dword(asd_ha, LmARP2CTL(lseq)); |
| if (!(arp2ctl & PAUSED)) |
| return 0; |
| udelay(PAUSE_DELAY); |
| } while (--count > 0); |
| |
| ASD_DPRINTK("couldn't unpause LSEQ %d\n", lseq); |
| return 0; |
| } |
| |
| |
| /* ---------- Downloading CSEQ/LSEQ microcode ---------- */ |
| |
| static int asd_verify_cseq(struct asd_ha_struct *asd_ha, const u8 *_prog, |
| u32 size) |
| { |
| u32 addr = CSEQ_RAM_REG_BASE_ADR; |
| const u32 *prog = (u32 *) _prog; |
| u32 i; |
| |
| for (i = 0; i < size; i += 4, prog++, addr += 4) { |
| u32 val = asd_read_reg_dword(asd_ha, addr); |
| |
| if (le32_to_cpu(*prog) != val) { |
| asd_printk("%s: cseq verify failed at %u " |
| "read:0x%x, wanted:0x%x\n", |
| pci_name(asd_ha->pcidev), |
| i, val, le32_to_cpu(*prog)); |
| return -1; |
| } |
| } |
| ASD_DPRINTK("verified %d bytes, passed\n", size); |
| return 0; |
| } |
| |
| /** |
| * asd_verify_lseq - verify the microcode of a link sequencer |
| * @asd_ha: pointer to host adapter structure |
| * @_prog: pointer to the microcode |
| * @size: size of the microcode in bytes |
| * @lseq: link sequencer of interest |
| * |
| * The link sequencer code is accessed in 4 KB pages, which are selected |
| * by setting LmRAMPAGE (bits 8 and 9) of the LmBISTCTL1 register. |
| * The 10 KB LSEQm instruction code is mapped, page at a time, at |
| * LmSEQRAM address. |
| */ |
| static int asd_verify_lseq(struct asd_ha_struct *asd_ha, const u8 *_prog, |
| u32 size, int lseq) |
| { |
| #define LSEQ_CODEPAGE_SIZE 4096 |
| int pages = (size + LSEQ_CODEPAGE_SIZE - 1) / LSEQ_CODEPAGE_SIZE; |
| u32 page; |
| const u32 *prog = (u32 *) _prog; |
| |
| for (page = 0; page < pages; page++) { |
| u32 i; |
| |
| asd_write_reg_dword(asd_ha, LmBISTCTL1(lseq), |
| page << LmRAMPAGE_LSHIFT); |
| for (i = 0; size > 0 && i < LSEQ_CODEPAGE_SIZE; |
| i += 4, prog++, size-=4) { |
| |
| u32 val = asd_read_reg_dword(asd_ha, LmSEQRAM(lseq)+i); |
| |
| if (le32_to_cpu(*prog) != val) { |
| asd_printk("%s: LSEQ%d verify failed " |
| "page:%d, offs:%d\n", |
| pci_name(asd_ha->pcidev), |
| lseq, page, i); |
| return -1; |
| } |
| } |
| } |
| ASD_DPRINTK("LSEQ%d verified %d bytes, passed\n", lseq, |
| (int)((u8 *)prog-_prog)); |
| return 0; |
| } |
| |
| /** |
| * asd_verify_seq -- verify CSEQ/LSEQ microcode |
| * @asd_ha: pointer to host adapter structure |
| * @prog: pointer to microcode |
| * @size: size of the microcode |
| * @lseq_mask: if 0, verify CSEQ microcode, else mask of LSEQs of interest |
| * |
| * Return 0 if microcode is correct, negative on mismatch. |
| */ |
| static int asd_verify_seq(struct asd_ha_struct *asd_ha, const u8 *prog, |
| u32 size, u8 lseq_mask) |
| { |
| if (lseq_mask == 0) |
| return asd_verify_cseq(asd_ha, prog, size); |
| else { |
| int lseq, err; |
| |
| for_each_sequencer(lseq_mask, lseq_mask, lseq) { |
| err = asd_verify_lseq(asd_ha, prog, size, lseq); |
| if (err) |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| #define ASD_DMA_MODE_DOWNLOAD |
| #ifdef ASD_DMA_MODE_DOWNLOAD |
| /* This is the size of the CSEQ Mapped instruction page */ |
| #define MAX_DMA_OVLY_COUNT ((1U << 14)-1) |
| static int asd_download_seq(struct asd_ha_struct *asd_ha, |
| const u8 * const prog, u32 size, u8 lseq_mask) |
| { |
| u32 comstaten; |
| u32 reg; |
| int page; |
| const int pages = (size + MAX_DMA_OVLY_COUNT - 1) / MAX_DMA_OVLY_COUNT; |
| struct asd_dma_tok *token; |
| int err = 0; |
| |
| if (size % 4) { |
| asd_printk("sequencer program not multiple of 4\n"); |
| return -1; |
| } |
| |
| asd_pause_cseq(asd_ha); |
| asd_pause_lseq(asd_ha, 0xFF); |
| |
| /* save, disable and clear interrupts */ |
| comstaten = asd_read_reg_dword(asd_ha, COMSTATEN); |
| asd_write_reg_dword(asd_ha, COMSTATEN, 0); |
| asd_write_reg_dword(asd_ha, COMSTAT, COMSTAT_MASK); |
| |
| asd_write_reg_dword(asd_ha, CHIMINTEN, RST_CHIMINTEN); |
| asd_write_reg_dword(asd_ha, CHIMINT, CHIMINT_MASK); |
| |
| token = asd_alloc_coherent(asd_ha, MAX_DMA_OVLY_COUNT, GFP_KERNEL); |
| if (!token) { |
| asd_printk("out of memory for dma SEQ download\n"); |
| err = -ENOMEM; |
| goto out; |
| } |
| ASD_DPRINTK("dma-ing %d bytes\n", size); |
| |
| for (page = 0; page < pages; page++) { |
| int i; |
| u32 left = min(size-page*MAX_DMA_OVLY_COUNT, |
| (u32)MAX_DMA_OVLY_COUNT); |
| |
| memcpy(token->vaddr, prog + page*MAX_DMA_OVLY_COUNT, left); |
| asd_write_reg_addr(asd_ha, OVLYDMAADR, token->dma_handle); |
| asd_write_reg_dword(asd_ha, OVLYDMACNT, left); |
| reg = !page ? RESETOVLYDMA : 0; |
| reg |= (STARTOVLYDMA | OVLYHALTERR); |
| reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ); |
| /* Start DMA. */ |
| asd_write_reg_dword(asd_ha, OVLYDMACTL, reg); |
| |
| for (i = PAUSE_TRIES*100; i > 0; i--) { |
| u32 dmadone = asd_read_reg_dword(asd_ha, OVLYDMACTL); |
| if (!(dmadone & OVLYDMAACT)) |
| break; |
| udelay(PAUSE_DELAY); |
| } |
| } |
| |
| reg = asd_read_reg_dword(asd_ha, COMSTAT); |
| if (!(reg & OVLYDMADONE) || (reg & OVLYERR) |
| || (asd_read_reg_dword(asd_ha, CHIMINT) & DEVEXCEPT_MASK)){ |
| asd_printk("%s: error DMA-ing sequencer code\n", |
| pci_name(asd_ha->pcidev)); |
| err = -ENODEV; |
| } |
| |
| asd_free_coherent(asd_ha, token); |
| out: |
| asd_write_reg_dword(asd_ha, COMSTATEN, comstaten); |
| |
| return err ? : asd_verify_seq(asd_ha, prog, size, lseq_mask); |
| } |
| #else /* ASD_DMA_MODE_DOWNLOAD */ |
| static int asd_download_seq(struct asd_ha_struct *asd_ha, const u8 *_prog, |
| u32 size, u8 lseq_mask) |
| { |
| int i; |
| u32 reg = 0; |
| const u32 *prog = (u32 *) _prog; |
| |
| if (size % 4) { |
| asd_printk("sequencer program not multiple of 4\n"); |
| return -1; |
| } |
| |
| asd_pause_cseq(asd_ha); |
| asd_pause_lseq(asd_ha, 0xFF); |
| |
| reg |= (lseq_mask ? (((u32)lseq_mask) << 8) : OVLYCSEQ); |
| reg |= PIOCMODE; |
| |
| asd_write_reg_dword(asd_ha, OVLYDMACNT, size); |
| asd_write_reg_dword(asd_ha, OVLYDMACTL, reg); |
| |
| ASD_DPRINTK("downloading %s sequencer%s in PIO mode...\n", |
| lseq_mask ? "LSEQ" : "CSEQ", lseq_mask ? "s" : ""); |
| |
| for (i = 0; i < size; i += 4, prog++) |
| asd_write_reg_dword(asd_ha, SPIODATA, *prog); |
| |
| reg = (reg & ~PIOCMODE) | OVLYHALTERR; |
| asd_write_reg_dword(asd_ha, OVLYDMACTL, reg); |
| |
| return asd_verify_seq(asd_ha, _prog, size, lseq_mask); |
| } |
| #endif /* ASD_DMA_MODE_DOWNLOAD */ |
| |
| /** |
| * asd_seq_download_seqs - download the sequencer microcode |
| * @asd_ha: pointer to host adapter structure |
| * |
| * Download the central and link sequencer microcode. |
| */ |
| static int asd_seq_download_seqs(struct asd_ha_struct *asd_ha) |
| { |
| int err; |
| |
| if (!asd_ha->hw_prof.enabled_phys) { |
| asd_printk("%s: no enabled phys!\n", pci_name(asd_ha->pcidev)); |
| return -ENODEV; |
| } |
| |
| /* Download the CSEQ */ |
| ASD_DPRINTK("downloading CSEQ...\n"); |
| err = asd_download_seq(asd_ha, cseq_code, cseq_code_size, 0); |
| if (err) { |
| asd_printk("CSEQ download failed:%d\n", err); |
| return err; |
| } |
| |
| /* Download the Link Sequencers code. All of the Link Sequencers |
| * microcode can be downloaded at the same time. |
| */ |
| ASD_DPRINTK("downloading LSEQs...\n"); |
| err = asd_download_seq(asd_ha, lseq_code, lseq_code_size, |
| asd_ha->hw_prof.enabled_phys); |
| if (err) { |
| /* Try it one at a time */ |
| u8 lseq; |
| u8 lseq_mask = asd_ha->hw_prof.enabled_phys; |
| |
| for_each_sequencer(lseq_mask, lseq_mask, lseq) { |
| err = asd_download_seq(asd_ha, lseq_code, |
| lseq_code_size, 1<<lseq); |
| if (err) |
| break; |
| } |
| } |
| if (err) |
| asd_printk("LSEQs download failed:%d\n", err); |
| |
| return err; |
| } |
| |
| /* ---------- Initializing the chip, chip memory, etc. ---------- */ |
| |
| /** |
| * asd_init_cseq_mip - initialize CSEQ mode independent pages 4-7 |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static void asd_init_cseq_mip(struct asd_ha_struct *asd_ha) |
| { |
| /* CSEQ Mode Independent, page 4 setup. */ |
| asd_write_reg_word(asd_ha, CSEQ_Q_EXE_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_EXE_TAIL, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_DONE_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_DONE_TAIL, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_SEND_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_SEND_TAIL, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_DMA2CHIM_TAIL, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_COPY_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_COPY_TAIL, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_REG0, 0); |
| asd_write_reg_word(asd_ha, CSEQ_REG1, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_REG2, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_LINK_CTL_Q_MAP, 0); |
| { |
| u8 con = asd_read_reg_byte(asd_ha, CCONEXIST); |
| u8 val = hweight8(con); |
| asd_write_reg_byte(asd_ha, CSEQ_MAX_CSEQ_MODE, (val<<4)|val); |
| } |
| asd_write_reg_word(asd_ha, CSEQ_FREE_LIST_HACK_COUNT, 0); |
| |
| /* CSEQ Mode independent, page 5 setup. */ |
| asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_QUEUE+4, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_EST_NEXUS_REQ_COUNT+4, 0); |
| asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_EST_NEXUS_TAIL, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_NEED_EST_NEXUS_SCB, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_HEAD, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_REQ_TAIL, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_EST_NEXUS_SCB_OFFSET, 0); |
| |
| /* CSEQ Mode independent, page 6 setup. */ |
| asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR0, 0); |
| asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_RET_ADDR1, 0); |
| asd_write_reg_word(asd_ha, CSEQ_INT_ROUT_SCBPTR, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_INT_ROUT_MODE, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_ISR_SCRATCH_FLAGS, 0); |
| asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_SINDEX, 0); |
| asd_write_reg_word(asd_ha, CSEQ_ISR_SAVE_DINDEX, 0); |
| asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_MONIRTT_TAIL, 0xFFFF); |
| /* Calculate the free scb mask. */ |
| { |
| u16 cmdctx = asd_get_cmdctx_size(asd_ha); |
| cmdctx = (~((cmdctx/128)-1)) >> 8; |
| asd_write_reg_byte(asd_ha, CSEQ_FREE_SCB_MASK, (u8)cmdctx); |
| } |
| asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_HEAD, |
| first_scb_site_no); |
| asd_write_reg_word(asd_ha, CSEQ_BUILTIN_FREE_SCB_TAIL, |
| last_scb_site_no); |
| asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_EXTENDED_FREE_SCB_TAIL, 0xFFFF); |
| |
| /* CSEQ Mode independent, page 7 setup. */ |
| asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_QUEUE+4, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_EMPTY_REQ_COUNT+4, 0); |
| asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_Q_EMPTY_TAIL, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_NEED_EMPTY_SCB, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_HEAD, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_EMPTY_REQ_TAIL, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_EMPTY_SCB_OFFSET, 0); |
| asd_write_reg_word(asd_ha, CSEQ_PRIMITIVE_DATA, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_TIMEOUT_CONST, 0); |
| } |
| |
| /** |
| * asd_init_cseq_mdp - initialize CSEQ Mode dependent pages |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha) |
| { |
| int i; |
| int moffs; |
| |
| moffs = CSEQ_PAGE_SIZE * 2; |
| |
| /* CSEQ Mode dependent, modes 0-7, page 0 setup. */ |
| for (i = 0; i < 8; i++) { |
| asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SINDEX, 0); |
| asd_write_reg_word(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCBPTR, 0); |
| asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_HEAD, 0xFFFF); |
| asd_write_reg_word(asd_ha, i*moffs+CSEQ_Q_LINK_TAIL, 0xFFFF); |
| asd_write_reg_byte(asd_ha, i*moffs+CSEQ_LRM_SAVE_SCRPAGE, 0); |
| } |
| |
| /* CSEQ Mode dependent, mode 0-7, page 1 and 2 shall be ignored. */ |
| |
| /* CSEQ Mode dependent, mode 8, page 0 setup. */ |
| asd_write_reg_word(asd_ha, CSEQ_RET_ADDR, 0xFFFF); |
| asd_write_reg_word(asd_ha, CSEQ_RET_SCBPTR, 0); |
| asd_write_reg_word(asd_ha, CSEQ_SAVE_SCBPTR, 0); |
| asd_write_reg_word(asd_ha, CSEQ_EMPTY_TRANS_CTX, 0); |
| asd_write_reg_word(asd_ha, CSEQ_RESP_LEN, 0); |
| asd_write_reg_word(asd_ha, CSEQ_TMF_SCBPTR, 0); |
| asd_write_reg_word(asd_ha, CSEQ_GLOBAL_PREV_SCB, 0); |
| asd_write_reg_word(asd_ha, CSEQ_GLOBAL_HEAD, 0); |
| asd_write_reg_word(asd_ha, CSEQ_CLEAR_LU_HEAD, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_TMF_OPCODE, 0); |
| asd_write_reg_byte(asd_ha, CSEQ_SCRATCH_FLAGS, 0); |
| asd_write_reg_word(asd_ha, CSEQ_HSB_SITE, 0); |
| asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_SCB_SITE, |
| (u16)last_scb_site_no+1); |
| asd_write_reg_word(asd_ha, CSEQ_FIRST_INV_DDB_SITE, |
| (u16)asd_ha->hw_prof.max_ddbs); |
| |
| /* CSEQ Mode dependent, mode 8, page 1 setup. */ |
| asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CLEAR + 4, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK, 0); |
| asd_write_reg_dword(asd_ha, CSEQ_LUN_TO_CHECK + 4, 0); |
| |
| /* CSEQ Mode dependent, mode 8, page 2 setup. */ |
| /* Tell the sequencer the bus address of the first SCB. */ |
| asd_write_reg_addr(asd_ha, CSEQ_HQ_NEW_POINTER, |
| asd_ha->seq.next_scb.dma_handle); |
| ASD_DPRINTK("First SCB dma_handle: 0x%llx\n", |
| (unsigned long long)asd_ha->seq.next_scb.dma_handle); |
| |
| /* Tell the sequencer the first Done List entry address. */ |
| asd_write_reg_addr(asd_ha, CSEQ_HQ_DONE_BASE, |
| asd_ha->seq.actual_dl->dma_handle); |
| |
| /* Initialize the Q_DONE_POINTER with the least significant |
| * 4 bytes of the first Done List address. */ |
| asd_write_reg_dword(asd_ha, CSEQ_HQ_DONE_POINTER, |
| ASD_BUSADDR_LO(asd_ha->seq.actual_dl->dma_handle)); |
| |
| asd_write_reg_byte(asd_ha, CSEQ_HQ_DONE_PASS, ASD_DEF_DL_TOGGLE); |
| |
| /* CSEQ Mode dependent, mode 8, page 3 shall be ignored. */ |
| } |
| |
| /** |
| * asd_init_cseq_scratch -- setup and init CSEQ |
| * @asd_ha: pointer to host adapter structure |
| * |
| * Setup and initialize Central sequencers. Initialize the mode |
| * independent and dependent scratch page to the default settings. |
| */ |
| static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha) |
| { |
| asd_init_cseq_mip(asd_ha); |
| asd_init_cseq_mdp(asd_ha); |
| } |
| |
| /** |
| * asd_init_lseq_mip -- initialize LSEQ Mode independent pages 0-3 |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static void asd_init_lseq_mip(struct asd_ha_struct *asd_ha, u8 lseq) |
| { |
| int i; |
| |
| /* LSEQ Mode independent page 0 setup. */ |
| asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_HEAD(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_Q_TGTXFR_TAIL(lseq), 0xFFFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_LINK_NUMBER(lseq), lseq); |
| asd_write_reg_byte(asd_ha, LmSEQ_SCRATCH_FLAGS(lseq), |
| ASD_NOTIFY_ENABLE_SPINUP); |
| asd_write_reg_dword(asd_ha, LmSEQ_CONNECTION_STATE(lseq),0x08000000); |
| asd_write_reg_word(asd_ha, LmSEQ_CONCTL(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_CONSTAT(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_CONNECTION_MODES(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_REG1_ISR(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_REG2_ISR(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_REG3_ISR(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_REG0_ISR(lseq)+4, 0); |
| |
| /* LSEQ Mode independent page 1 setup. */ |
| asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR0(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR1(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR2(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_EST_NEXUS_SCBPTR3(lseq), 0xFFFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE0(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE1(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE2(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_OPCODE3(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_HEAD(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_SCB_TAIL(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EST_NEXUS_BUF_AVAIL(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_TIMEOUT_CONST(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_SINDEX(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_ISR_SAVE_DINDEX(lseq), 0); |
| |
| /* LSEQ Mode Independent page 2 setup. */ |
| asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR0(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR1(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR2(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_EMPTY_SCB_PTR3(lseq), 0xFFFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD0(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD1(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD2(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_OPCD3(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_HEAD(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_SCB_TAIL(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_EMPTY_BUFS_AVAIL(lseq), 0); |
| for (i = 0; i < 12; i += 4) |
| asd_write_reg_dword(asd_ha, LmSEQ_ATA_SCR_REGS(lseq) + i, 0); |
| |
| /* LSEQ Mode Independent page 3 setup. */ |
| |
| /* Device present timer timeout */ |
| asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TMR_TOUT_CONST(lseq), |
| ASD_DEV_PRESENT_TIMEOUT); |
| |
| /* SATA interlock timer disabled */ |
| asd_write_reg_dword(asd_ha, LmSEQ_SATA_INTERLOCK_TIMEOUT(lseq), |
| ASD_SATA_INTERLOCK_TIMEOUT); |
| |
| /* STP shutdown timer timeout constant, IGNORED by the sequencer, |
| * always 0. */ |
| asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMEOUT(lseq), |
| ASD_STP_SHUTDOWN_TIMEOUT); |
| |
| asd_write_reg_dword(asd_ha, LmSEQ_SRST_ASSERT_TIMEOUT(lseq), |
| ASD_SRST_ASSERT_TIMEOUT); |
| |
| asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMEOUT(lseq), |
| ASD_RCV_FIS_TIMEOUT); |
| |
| asd_write_reg_dword(asd_ha, LmSEQ_ONE_MILLISEC_TIMEOUT(lseq), |
| ASD_ONE_MILLISEC_TIMEOUT); |
| |
| /* COM_INIT timer */ |
| asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(lseq), |
| ASD_TEN_MILLISEC_TIMEOUT); |
| |
| asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMEOUT(lseq), |
| ASD_SMP_RCV_TIMEOUT); |
| } |
| |
| /** |
| * asd_init_lseq_mdp -- initialize LSEQ mode dependent pages. |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) |
| { |
| int i; |
| u32 moffs; |
| u16 ret_addr[] = { |
| 0xFFFF, /* mode 0 */ |
| 0xFFFF, /* mode 1 */ |
| mode2_task, /* mode 2 */ |
| 0, |
| 0xFFFF, /* mode 4/5 */ |
| 0xFFFF, /* mode 4/5 */ |
| }; |
| |
| /* |
| * Mode 0,1,2 and 4/5 have common field on page 0 for the first |
| * 14 bytes. |
| */ |
| for (i = 0; i < 3; i++) { |
| moffs = i * LSEQ_MODE_SCRATCH_SIZE; |
| asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR(lseq)+moffs, |
| ret_addr[i]); |
| asd_write_reg_word(asd_ha, LmSEQ_REG0_MODE(lseq)+moffs, 0); |
| asd_write_reg_word(asd_ha, LmSEQ_MODE_FLAGS(lseq)+moffs, 0); |
| asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR2(lseq)+moffs,0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_RET_ADDR1(lseq)+moffs,0xFFFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_OPCODE_TO_CSEQ(lseq)+moffs,0); |
| asd_write_reg_word(asd_ha, LmSEQ_DATA_TO_CSEQ(lseq)+moffs,0); |
| } |
| /* |
| * Mode 5 page 0 overlaps the same scratch page with Mode 0 page 3. |
| */ |
| asd_write_reg_word(asd_ha, |
| LmSEQ_RET_ADDR(lseq)+LSEQ_MODE5_PAGE0_OFFSET, |
| ret_addr[5]); |
| asd_write_reg_word(asd_ha, |
| LmSEQ_REG0_MODE(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0); |
| asd_write_reg_word(asd_ha, |
| LmSEQ_MODE_FLAGS(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0); |
| asd_write_reg_word(asd_ha, |
| LmSEQ_RET_ADDR2(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF); |
| asd_write_reg_word(asd_ha, |
| LmSEQ_RET_ADDR1(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0xFFFF); |
| asd_write_reg_byte(asd_ha, |
| LmSEQ_OPCODE_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET,0); |
| asd_write_reg_word(asd_ha, |
| LmSEQ_DATA_TO_CSEQ(lseq)+LSEQ_MODE5_PAGE0_OFFSET, 0); |
| |
| /* LSEQ Mode dependent 0, page 0 setup. */ |
| asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_DDB_SITE(lseq), |
| (u16)asd_ha->hw_prof.max_ddbs); |
| asd_write_reg_word(asd_ha, LmSEQ_EMPTY_TRANS_CTX(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_RESP_LEN(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_FIRST_INV_SCB_SITE(lseq), |
| (u16)last_scb_site_no+1); |
| asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq), |
| (u16) ((LmM0INTEN_MASK & 0xFFFF0000) >> 16)); |
| asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2, |
| (u16) LmM0INTEN_MASK & 0xFFFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_FRM_LEN(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_PROTOCOL(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_RESP_STATUS(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_LAST_LOADED_SGE(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_SAVE_SCBPTR(lseq), 0); |
| |
| /* LSEQ mode dependent, mode 1, page 0 setup. */ |
| asd_write_reg_word(asd_ha, LmSEQ_Q_XMIT_HEAD(lseq), 0xFFFF); |
| asd_write_reg_word(asd_ha, LmSEQ_M1_EMPTY_TRANS_CTX(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_INI_CONN_TAG(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_FAILED_OPEN_STATUS(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_XMIT_REQUEST_TYPE(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_M1_RESP_STATUS(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_M1_LAST_LOADED_SGE(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_M1_SAVE_SCBPTR(lseq), 0); |
| |
| /* LSEQ Mode dependent mode 2, page 0 setup */ |
| asd_write_reg_word(asd_ha, LmSEQ_PORT_COUNTER(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_PM_TABLE_PTR(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_SATA_INTERLOCK_TMR_SAVE(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_IP_BITL(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_COPY_SMP_CONN_TAG(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_P0M2_OFFS1AH(lseq), 0); |
| |
| /* LSEQ Mode dependent, mode 4/5, page 0 setup. */ |
| asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_STATUS(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_MODE(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_Q_LINK_HEAD(lseq), 0xFFFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_LINK_RST_ERR(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_SAVED_OOB_SIGNALS(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_SAS_RESET_MODE(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_LINK_RESET_RETRY_COUNT(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_NUM_LINK_RESET_RETRIES(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0); |
| /* |
| * Set the desired interval between transmissions of the NOTIFY |
| * (ENABLE SPINUP) primitive. Must be initialized to val - 1. |
| */ |
| asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq), |
| ASD_NOTIFY_TIMEOUT - 1); |
| /* No delay for the first NOTIFY to be sent to the attached target. */ |
| asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_DOWN_COUNT(lseq), |
| ASD_NOTIFY_DOWN_COUNT); |
| asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(lseq), |
| ASD_NOTIFY_DOWN_COUNT); |
| |
| /* LSEQ Mode dependent, mode 0 and 1, page 1 setup. */ |
| for (i = 0; i < 2; i++) { |
| int j; |
| /* Start from Page 1 of Mode 0 and 1. */ |
| moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE; |
| /* All the fields of page 1 can be initialized to 0. */ |
| for (j = 0; j < LSEQ_PAGE_SIZE; j += 4) |
| asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0); |
| } |
| |
| /* LSEQ Mode dependent, mode 2, page 1 setup. */ |
| asd_write_reg_dword(asd_ha, LmSEQ_INVALID_DWORD_COUNT(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_DISPARITY_ERROR_COUNT(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_LOSS_OF_SYNC_COUNT(lseq), 0); |
| |
| /* LSEQ Mode dependent, mode 4/5, page 1. */ |
| for (i = 0; i < LSEQ_PAGE_SIZE; i+=4) |
| asd_write_reg_dword(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq)+i, 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_FRAME_TYPE_MASK(lseq), 0xFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq), 0xFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+1,0xFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_HASHED_DEST_ADDR_MASK(lseq)+2,0xFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq), 0xFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+1, 0xFF); |
| asd_write_reg_byte(asd_ha, LmSEQ_HASHED_SRC_ADDR_MASK(lseq)+2, 0xFF); |
| asd_write_reg_dword(asd_ha, LmSEQ_DATA_OFFSET(lseq), 0xFFFFFFFF); |
| |
| /* LSEQ Mode dependent, mode 0, page 2 setup. */ |
| asd_write_reg_dword(asd_ha, LmSEQ_SMP_RCV_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_DEVICE_BITS(lseq), 0); |
| asd_write_reg_word(asd_ha, LmSEQ_SDB_DDB(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_SDB_NUM_TAGS(lseq), 0); |
| asd_write_reg_byte(asd_ha, LmSEQ_SDB_CURR_TAG(lseq), 0); |
| |
| /* LSEQ Mode Dependent 1, page 2 setup. */ |
| asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(lseq)+4, 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_OPEN_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_SRST_AS_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_LAST_LOADED_SG_EL(lseq), 0); |
| |
| /* LSEQ Mode Dependent 2, page 2 setup. */ |
| /* The LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS is IGNORED by the sequencer, |
| * i.e. always 0. */ |
| asd_write_reg_dword(asd_ha, LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(lseq),0); |
| asd_write_reg_dword(asd_ha, LmSEQ_CLOSE_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_BREAK_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_DWS_RESET_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha,LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(lseq),0); |
| asd_write_reg_dword(asd_ha, LmSEQ_MCTL_TIMER_TERM_TS(lseq), 0); |
| |
| /* LSEQ Mode Dependent 4/5, page 2 setup. */ |
| asd_write_reg_dword(asd_ha, LmSEQ_COMINIT_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_RCV_ID_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_RCV_FIS_TIMER_TERM_TS(lseq), 0); |
| asd_write_reg_dword(asd_ha, LmSEQ_DEV_PRES_TIMER_TERM_TS(lseq), 0); |
| } |
| |
| /** |
| * asd_init_lseq_scratch -- setup and init link sequencers |
| * @asd_ha: pointer to host adapter struct |
| */ |
| static void asd_init_lseq_scratch(struct asd_ha_struct *asd_ha) |
| { |
| u8 lseq; |
| u8 lseq_mask; |
| |
| lseq_mask = asd_ha->hw_prof.enabled_phys; |
| for_each_sequencer(lseq_mask, lseq_mask, lseq) { |
| asd_init_lseq_mip(asd_ha, lseq); |
| asd_init_lseq_mdp(asd_ha, lseq); |
| } |
| } |
| |
| /** |
| * asd_init_scb_sites -- initialize sequencer SCB sites (memory). |
| * @asd_ha: pointer to host adapter structure |
| * |
| * This should be done before initializing common CSEQ and LSEQ |
| * scratch since those areas depend on some computed values here, |
| * last_scb_site_no, etc. |
| */ |
| static void asd_init_scb_sites(struct asd_ha_struct *asd_ha) |
| { |
| u16 site_no; |
| u16 max_scbs = 0; |
| |
| for (site_no = asd_ha->hw_prof.max_scbs-1; |
| site_no != (u16) -1; |
| site_no--) { |
| u16 i; |
| |
| /* Initialize all fields in the SCB site to 0. */ |
| for (i = 0; i < ASD_SCB_SIZE; i += 4) |
| asd_scbsite_write_dword(asd_ha, site_no, i, 0); |
| |
| /* Initialize SCB Site Opcode field to invalid. */ |
| asd_scbsite_write_byte(asd_ha, site_no, |
| offsetof(struct scb_header, opcode), |
| 0xFF); |
| |
| /* Initialize SCB Site Flags field to mean a response |
| * frame has been received. This means inadvertent |
| * frames received to be dropped. */ |
| asd_scbsite_write_byte(asd_ha, site_no, 0x49, 0x01); |
| |
| /* Workaround needed by SEQ to fix a SATA issue is to exclude |
| * certain SCB sites from the free list. */ |
| if (!SCB_SITE_VALID(site_no)) |
| continue; |
| |
| if (last_scb_site_no == 0) |
| last_scb_site_no = site_no; |
| |
| /* For every SCB site, we need to initialize the |
| * following fields: Q_NEXT, SCB_OPCODE, SCB_FLAGS, |
| * and SG Element Flag. */ |
| |
| /* Q_NEXT field of the last SCB is invalidated. */ |
| asd_scbsite_write_word(asd_ha, site_no, 0, first_scb_site_no); |
| |
| first_scb_site_no = site_no; |
| max_scbs++; |
| } |
| asd_ha->hw_prof.max_scbs = max_scbs; |
| ASD_DPRINTK("max_scbs:%d\n", asd_ha->hw_prof.max_scbs); |
| ASD_DPRINTK("first_scb_site_no:0x%x\n", first_scb_site_no); |
| ASD_DPRINTK("last_scb_site_no:0x%x\n", last_scb_site_no); |
| } |
| |
| /** |
| * asd_init_cseq_cio - initialize CSEQ CIO registers |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) |
| { |
| int i; |
| |
| asd_write_reg_byte(asd_ha, CSEQCOMINTEN, 0); |
| asd_write_reg_byte(asd_ha, CSEQDLCTL, ASD_DL_SIZE_BITS); |
| asd_write_reg_byte(asd_ha, CSEQDLOFFS, 0); |
| asd_write_reg_byte(asd_ha, CSEQDLOFFS+1, 0); |
| asd_ha->seq.scbpro = 0; |
| asd_write_reg_dword(asd_ha, SCBPRO, 0); |
| asd_write_reg_dword(asd_ha, CSEQCON, 0); |
| |
| /* Initialize CSEQ Mode 11 Interrupt Vectors. |
| * The addresses are 16 bit wide and in dword units. |
| * The values of their macros are in byte units. |
| * Thus we have to divide by 4. */ |
| asd_write_reg_word(asd_ha, CM11INTVEC0, cseq_vecs[0]); |
| asd_write_reg_word(asd_ha, CM11INTVEC1, cseq_vecs[1]); |
| asd_write_reg_word(asd_ha, CM11INTVEC2, cseq_vecs[2]); |
| |
| /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */ |
| asd_write_reg_byte(asd_ha, CARP2INTEN, EN_ARP2HALTC); |
| |
| /* Initialize CSEQ Scratch Page to 0x04. */ |
| asd_write_reg_byte(asd_ha, CSCRATCHPAGE, 0x04); |
| |
| /* Initialize CSEQ Mode[0-8] Dependent registers. */ |
| /* Initialize Scratch Page to 0. */ |
| for (i = 0; i < 9; i++) |
| asd_write_reg_byte(asd_ha, CMnSCRATCHPAGE(i), 0); |
| |
| /* Reset the ARP2 Program Count. */ |
| asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop); |
| |
| for (i = 0; i < 8; i++) { |
| /* Initialize Mode n Link m Interrupt Enable. */ |
| asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF); |
| /* Initialize Mode n Request Mailbox. */ |
| asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0); |
| } |
| } |
| |
| /** |
| * asd_init_lseq_cio -- initialize LmSEQ CIO registers |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static void asd_init_lseq_cio(struct asd_ha_struct *asd_ha, int lseq) |
| { |
| u8 *sas_addr; |
| int i; |
| |
| /* Enable ARP2HALTC (ARP2 Halted from Halt Code Write). */ |
| asd_write_reg_dword(asd_ha, LmARP2INTEN(lseq), EN_ARP2HALTC); |
| |
| asd_write_reg_byte(asd_ha, LmSCRATCHPAGE(lseq), 0); |
| |
| /* Initialize Mode 0,1, and 2 SCRATCHPAGE to 0. */ |
| for (i = 0; i < 3; i++) |
| asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, i), 0); |
| |
| /* Initialize Mode 5 SCRATCHPAGE to 0. */ |
| asd_write_reg_byte(asd_ha, LmMnSCRATCHPAGE(lseq, 5), 0); |
| |
| asd_write_reg_dword(asd_ha, LmRSPMBX(lseq), 0); |
| /* Initialize Mode 0,1,2 and 5 Interrupt Enable and |
| * Interrupt registers. */ |
| asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 0), LmM0INTEN_MASK); |
| asd_write_reg_dword(asd_ha, LmMnINT(lseq, 0), 0xFFFFFFFF); |
| /* Mode 1 */ |
| asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 1), LmM1INTEN_MASK); |
| asd_write_reg_dword(asd_ha, LmMnINT(lseq, 1), 0xFFFFFFFF); |
| /* Mode 2 */ |
| asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 2), LmM2INTEN_MASK); |
| asd_write_reg_dword(asd_ha, LmMnINT(lseq, 2), 0xFFFFFFFF); |
| /* Mode 5 */ |
| asd_write_reg_dword(asd_ha, LmMnINTEN(lseq, 5), LmM5INTEN_MASK); |
| asd_write_reg_dword(asd_ha, LmMnINT(lseq, 5), 0xFFFFFFFF); |
| |
| /* Enable HW Timer status. */ |
| asd_write_reg_byte(asd_ha, LmHWTSTATEN(lseq), LmHWTSTATEN_MASK); |
| |
| /* Enable Primitive Status 0 and 1. */ |
| asd_write_reg_dword(asd_ha, LmPRIMSTAT0EN(lseq), LmPRIMSTAT0EN_MASK); |
| asd_write_reg_dword(asd_ha, LmPRIMSTAT1EN(lseq), LmPRIMSTAT1EN_MASK); |
| |
| /* Enable Frame Error. */ |
| asd_write_reg_dword(asd_ha, LmFRMERREN(lseq), LmFRMERREN_MASK); |
| asd_write_reg_byte(asd_ha, LmMnHOLDLVL(lseq, 0), 0x50); |
| |
| /* Initialize Mode 0 Transfer Level to 512. */ |
| asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 0), LmMnXFRLVL_512); |
| /* Initialize Mode 1 Transfer Level to 256. */ |
| asd_write_reg_byte(asd_ha, LmMnXFRLVL(lseq, 1), LmMnXFRLVL_256); |
| |
| /* Initialize Program Count. */ |
| asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop); |
| |
| /* Enable Blind SG Move. */ |
| asd_write_reg_dword(asd_ha, LmMODECTL(lseq), LmBLIND48); |
| asd_write_reg_word(asd_ha, LmM3SATATIMER(lseq), |
| ASD_SATA_INTERLOCK_TIMEOUT); |
| |
| (void) asd_read_reg_dword(asd_ha, LmREQMBX(lseq)); |
| |
| /* Clear Primitive Status 0 and 1. */ |
| asd_write_reg_dword(asd_ha, LmPRMSTAT0(lseq), 0xFFFFFFFF); |
| asd_write_reg_dword(asd_ha, LmPRMSTAT1(lseq), 0xFFFFFFFF); |
| |
| /* Clear HW Timer status. */ |
| asd_write_reg_byte(asd_ha, LmHWTSTAT(lseq), 0xFF); |
| |
| /* Clear DMA Errors for Mode 0 and 1. */ |
| asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 0), 0xFF); |
| asd_write_reg_byte(asd_ha, LmMnDMAERRS(lseq, 1), 0xFF); |
| |
| /* Clear SG DMA Errors for Mode 0 and 1. */ |
| asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 0), 0xFF); |
| asd_write_reg_byte(asd_ha, LmMnSGDMAERRS(lseq, 1), 0xFF); |
| |
| /* Clear Mode 0 Buffer Parity Error. */ |
| asd_write_reg_byte(asd_ha, LmMnBUFSTAT(lseq, 0), LmMnBUFPERR); |
| |
| /* Clear Mode 0 Frame Error register. */ |
| asd_write_reg_dword(asd_ha, LmMnFRMERR(lseq, 0), 0xFFFFFFFF); |
| |
| /* Reset LSEQ external interrupt arbiter. */ |
| asd_write_reg_byte(asd_ha, LmARP2INTCTL(lseq), RSTINTCTL); |
| |
| /* Set the Phy SAS for the LmSEQ WWN. */ |
| sas_addr = asd_ha->phys[lseq].phy_desc->sas_addr; |
| for (i = 0; i < SAS_ADDR_SIZE; i++) |
| asd_write_reg_byte(asd_ha, LmWWN(lseq) + i, sas_addr[i]); |
| |
| /* Set the Transmit Size to 1024 bytes, 0 = 256 Dwords. */ |
| asd_write_reg_byte(asd_ha, LmMnXMTSIZE(lseq, 1), 0); |
| |
| /* Set the Bus Inactivity Time Limit Timer. */ |
| asd_write_reg_word(asd_ha, LmBITL_TIMER(lseq), 9); |
| |
| /* Enable SATA Port Multiplier. */ |
| asd_write_reg_byte(asd_ha, LmMnSATAFS(lseq, 1), 0x80); |
| |
| /* Initialize Interrupt Vector[0-10] address in Mode 3. |
| * See the comment on CSEQ_INT_* */ |
| asd_write_reg_word(asd_ha, LmM3INTVEC0(lseq), lseq_vecs[0]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC1(lseq), lseq_vecs[1]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC2(lseq), lseq_vecs[2]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC3(lseq), lseq_vecs[3]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC4(lseq), lseq_vecs[4]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC5(lseq), lseq_vecs[5]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC6(lseq), lseq_vecs[6]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC7(lseq), lseq_vecs[7]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC8(lseq), lseq_vecs[8]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC9(lseq), lseq_vecs[9]); |
| asd_write_reg_word(asd_ha, LmM3INTVEC10(lseq), lseq_vecs[10]); |
| /* |
| * Program the Link LED control, applicable only for |
| * Chip Rev. B or later. |
| */ |
| asd_write_reg_dword(asd_ha, LmCONTROL(lseq), |
| (LEDTIMER | LEDMODE_TXRX | LEDTIMERS_100ms)); |
| |
| /* Set the Align Rate for SAS and STP mode. */ |
| asd_write_reg_byte(asd_ha, LmM1SASALIGN(lseq), SAS_ALIGN_DEFAULT); |
| asd_write_reg_byte(asd_ha, LmM1STPALIGN(lseq), STP_ALIGN_DEFAULT); |
| } |
| |
| |
| /** |
| * asd_post_init_cseq -- clear CSEQ Mode n Int. status and Response mailbox |
| * @asd_ha: pointer to host adapter struct |
| */ |
| static void asd_post_init_cseq(struct asd_ha_struct *asd_ha) |
| { |
| int i; |
| |
| for (i = 0; i < 8; i++) |
| asd_write_reg_dword(asd_ha, CMnINT(i), 0xFFFFFFFF); |
| for (i = 0; i < 8; i++) |
| asd_read_reg_dword(asd_ha, CMnRSPMBX(i)); |
| /* Reset the external interrupt arbiter. */ |
| asd_write_reg_byte(asd_ha, CARP2INTCTL, RSTINTCTL); |
| } |
| |
| /** |
| * asd_init_ddb_0 -- initialize DDB 0 |
| * @asd_ha: pointer to host adapter structure |
| * |
| * Initialize DDB site 0 which is used internally by the sequencer. |
| */ |
| static void asd_init_ddb_0(struct asd_ha_struct *asd_ha) |
| { |
| int i; |
| |
| /* Zero out the DDB explicitly */ |
| for (i = 0; i < sizeof(struct asd_ddb_seq_shared); i+=4) |
| asd_ddbsite_write_dword(asd_ha, 0, i, 0); |
| |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, q_free_ddb_head), 0); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, q_free_ddb_tail), |
| asd_ha->hw_prof.max_ddbs-1); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, q_free_ddb_cnt), 0); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, q_used_ddb_head), 0xFFFF); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, q_used_ddb_tail), 0xFFFF); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, shared_mem_lock), 0); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, smp_conn_tag), 0); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, est_nexus_buf_cnt), 0); |
| asd_ddbsite_write_word(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, est_nexus_buf_thresh), |
| asd_ha->hw_prof.num_phys * 2); |
| asd_ddbsite_write_byte(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, settable_max_contexts),0); |
| asd_ddbsite_write_byte(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, conn_not_active), 0xFF); |
| asd_ddbsite_write_byte(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, phy_is_up), 0x00); |
| /* DDB 0 is reserved */ |
| set_bit(0, asd_ha->hw_prof.ddb_bitmap); |
| } |
| |
| static void asd_seq_init_ddb_sites(struct asd_ha_struct *asd_ha) |
| { |
| unsigned int i; |
| unsigned int ddb_site; |
| |
| for (ddb_site = 0 ; ddb_site < ASD_MAX_DDBS; ddb_site++) |
| for (i = 0; i < sizeof(struct asd_ddb_ssp_smp_target_port); i+= 4) |
| asd_ddbsite_write_dword(asd_ha, ddb_site, i, 0); |
| } |
| |
| /** |
| * asd_seq_setup_seqs -- setup and initialize central and link sequencers |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static void asd_seq_setup_seqs(struct asd_ha_struct *asd_ha) |
| { |
| int lseq; |
| u8 lseq_mask; |
| |
| /* Initialize DDB sites */ |
| asd_seq_init_ddb_sites(asd_ha); |
| |
| /* Initialize SCB sites. Done first to compute some values which |
| * the rest of the init code depends on. */ |
| asd_init_scb_sites(asd_ha); |
| |
| /* Initialize CSEQ Scratch RAM registers. */ |
| asd_init_cseq_scratch(asd_ha); |
| |
| /* Initialize LmSEQ Scratch RAM registers. */ |
| asd_init_lseq_scratch(asd_ha); |
| |
| /* Initialize CSEQ CIO registers. */ |
| asd_init_cseq_cio(asd_ha); |
| |
| asd_init_ddb_0(asd_ha); |
| |
| /* Initialize LmSEQ CIO registers. */ |
| lseq_mask = asd_ha->hw_prof.enabled_phys; |
| for_each_sequencer(lseq_mask, lseq_mask, lseq) |
| asd_init_lseq_cio(asd_ha, lseq); |
| asd_post_init_cseq(asd_ha); |
| } |
| |
| |
| /** |
| * asd_seq_start_cseq -- start the central sequencer, CSEQ |
| * @asd_ha: pointer to host adapter structure |
| */ |
| static int asd_seq_start_cseq(struct asd_ha_struct *asd_ha) |
| { |
| /* Reset the ARP2 instruction to location zero. */ |
| asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop); |
| |
| /* Unpause the CSEQ */ |
| return asd_unpause_cseq(asd_ha); |
| } |
| |
| /** |
| * asd_seq_start_lseq -- start a link sequencer |
| * @asd_ha: pointer to host adapter structure |
| * @lseq: the link sequencer of interest |
| */ |
| static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq) |
| { |
| /* Reset the ARP2 instruction to location zero. */ |
| asd_write_reg_word(asd_ha, LmPRGMCNT(lseq), lseq_idle_loop); |
| |
| /* Unpause the LmSEQ */ |
| return asd_seq_unpause_lseq(asd_ha, lseq); |
| } |
| |
| int asd_release_firmware(void) |
| { |
| release_firmware(sequencer_fw); |
| return 0; |
| } |
| |
| static int asd_request_firmware(struct asd_ha_struct *asd_ha) |
| { |
| int err, i; |
| struct sequencer_file_header header; |
| const struct sequencer_file_header *hdr_ptr; |
| u32 csum = 0; |
| u16 *ptr_cseq_vecs, *ptr_lseq_vecs; |
| |
| if (sequencer_fw) |
| /* already loaded */ |
| return 0; |
| |
| err = request_firmware(&sequencer_fw, |
| SAS_RAZOR_SEQUENCER_FW_FILE, |
| &asd_ha->pcidev->dev); |
| if (err) |
| return err; |
| |
| hdr_ptr = (const struct sequencer_file_header *)sequencer_fw->data; |
| |
| header.csum = le32_to_cpu(hdr_ptr->csum); |
| header.major = le32_to_cpu(hdr_ptr->major); |
| header.minor = le32_to_cpu(hdr_ptr->minor); |
| header.cseq_table_offset = le32_to_cpu(hdr_ptr->cseq_table_offset); |
| header.cseq_table_size = le32_to_cpu(hdr_ptr->cseq_table_size); |
| header.lseq_table_offset = le32_to_cpu(hdr_ptr->lseq_table_offset); |
| header.lseq_table_size = le32_to_cpu(hdr_ptr->lseq_table_size); |
| header.cseq_code_offset = le32_to_cpu(hdr_ptr->cseq_code_offset); |
| header.cseq_code_size = le32_to_cpu(hdr_ptr->cseq_code_size); |
| header.lseq_code_offset = le32_to_cpu(hdr_ptr->lseq_code_offset); |
| header.lseq_code_size = le32_to_cpu(hdr_ptr->lseq_code_size); |
| header.mode2_task = le16_to_cpu(hdr_ptr->mode2_task); |
| header.cseq_idle_loop = le16_to_cpu(hdr_ptr->cseq_idle_loop); |
| header.lseq_idle_loop = le16_to_cpu(hdr_ptr->lseq_idle_loop); |
| |
| for (i = sizeof(header.csum); i < sequencer_fw->size; i++) |
| csum += sequencer_fw->data[i]; |
| |
| if (csum != header.csum) { |
| asd_printk("Firmware file checksum mismatch\n"); |
| return -EINVAL; |
| } |
| |
| if (header.cseq_table_size != CSEQ_NUM_VECS || |
| header.lseq_table_size != LSEQ_NUM_VECS) { |
| asd_printk("Firmware file table size mismatch\n"); |
| return -EINVAL; |
| } |
| |
| asd_printk("Found sequencer Firmware version %d.%d (%s)\n", |
| header.major, header.minor, hdr_ptr->version); |
| |
| if (header.major != SAS_RAZOR_SEQUENCER_FW_MAJOR) { |
| asd_printk("Firmware Major Version Mismatch;" |
| "driver requires version %d.X", |
| SAS_RAZOR_SEQUENCER_FW_MAJOR); |
| return -EINVAL; |
| } |
| |
| ptr_cseq_vecs = (u16 *)&sequencer_fw->data[header.cseq_table_offset]; |
| ptr_lseq_vecs = (u16 *)&sequencer_fw->data[header.lseq_table_offset]; |
| mode2_task = header.mode2_task; |
| cseq_idle_loop = header.cseq_idle_loop; |
| lseq_idle_loop = header.lseq_idle_loop; |
| |
| for (i = 0; i < CSEQ_NUM_VECS; i++) |
| cseq_vecs[i] = le16_to_cpu(ptr_cseq_vecs[i]); |
| |
| for (i = 0; i < LSEQ_NUM_VECS; i++) |
| lseq_vecs[i] = le16_to_cpu(ptr_lseq_vecs[i]); |
| |
| cseq_code = &sequencer_fw->data[header.cseq_code_offset]; |
| cseq_code_size = header.cseq_code_size; |
| lseq_code = &sequencer_fw->data[header.lseq_code_offset]; |
| lseq_code_size = header.lseq_code_size; |
| |
| return 0; |
| } |
| |
| int asd_init_seqs(struct asd_ha_struct *asd_ha) |
| { |
| int err; |
| |
| err = asd_request_firmware(asd_ha); |
| |
| if (err) { |
| asd_printk("Failed to load sequencer firmware file %s, error %d\n", |
| SAS_RAZOR_SEQUENCER_FW_FILE, err); |
| return err; |
| } |
| |
| err = asd_seq_download_seqs(asd_ha); |
| if (err) { |
| asd_printk("couldn't download sequencers for %s\n", |
| pci_name(asd_ha->pcidev)); |
| return err; |
| } |
| |
| asd_seq_setup_seqs(asd_ha); |
| |
| return 0; |
| } |
| |
| int asd_start_seqs(struct asd_ha_struct *asd_ha) |
| { |
| int err; |
| u8 lseq_mask; |
| int lseq; |
| |
| err = asd_seq_start_cseq(asd_ha); |
| if (err) { |
| asd_printk("couldn't start CSEQ for %s\n", |
| pci_name(asd_ha->pcidev)); |
| return err; |
| } |
| |
| lseq_mask = asd_ha->hw_prof.enabled_phys; |
| for_each_sequencer(lseq_mask, lseq_mask, lseq) { |
| err = asd_seq_start_lseq(asd_ha, lseq); |
| if (err) { |
| asd_printk("coudln't start LSEQ %d for %s\n", lseq, |
| pci_name(asd_ha->pcidev)); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * asd_update_port_links -- update port_map_by_links and phy_is_up |
| * @sas_phy: pointer to the phy which has been added to a port |
| * |
| * 1) When a link reset has completed and we got BYTES DMAED with a |
| * valid frame we call this function for that phy, to indicate that |
| * the phy is up, i.e. we update the phy_is_up in DDB 0. The |
| * sequencer checks phy_is_up when pending SCBs are to be sent, and |
| * when an open address frame has been received. |
| * |
| * 2) When we know of ports, we call this function to update the map |
| * of phys participaing in that port, i.e. we update the |
| * port_map_by_links in DDB 0. When a HARD_RESET primitive has been |
| * received, the sequencer disables all phys in that port. |
| * port_map_by_links is also used as the conn_mask byte in the |
| * initiator/target port DDB. |
| */ |
| void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy) |
| { |
| const u8 phy_mask = (u8) phy->asd_port->phy_mask; |
| u8 phy_is_up; |
| u8 mask; |
| int i, err; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags); |
| for_each_phy(phy_mask, mask, i) |
| asd_ddbsite_write_byte(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, |
| port_map_by_links)+i,phy_mask); |
| |
| for (i = 0; i < 12; i++) { |
| phy_is_up = asd_ddbsite_read_byte(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, phy_is_up)); |
| err = asd_ddbsite_update_byte(asd_ha, 0, |
| offsetof(struct asd_ddb_seq_shared, phy_is_up), |
| phy_is_up, |
| phy_is_up | phy_mask); |
| if (!err) |
| break; |
| else if (err == -EFAULT) { |
| asd_printk("phy_is_up: parity error in DDB 0\n"); |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&asd_ha->hw_prof.ddb_lock, flags); |
| |
| if (err) |
| asd_printk("couldn't update DDB 0:error:%d\n", err); |
| } |
| |
| MODULE_FIRMWARE(SAS_RAZOR_SEQUENCER_FW_FILE); |
