drivers/net/wireless/microchip/wilc1000/wlan.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
  * All rights reserved.
  */

 #ifndef WILC_WLAN_H
 #define WILC_WLAN_H

 #include <linux/types.h>
 #include <linux/bitfield.h>

 /********************************************
  *
  *      Mac eth header length
  *
  ********************************************/
 #define MAX_MAC_HDR_LEN			26 /* QOS_MAC_HDR_LEN */
 #define SUB_MSDU_HEADER_LENGTH		14
 #define SNAP_HDR_LEN			8
 #define ETHERNET_HDR_LEN		14
 #define WORD_ALIGNMENT_PAD		0

 #define ETH_ETHERNET_HDR_OFFSET		(MAX_MAC_HDR_LEN + \
 					 SUB_MSDU_HEADER_LENGTH + \
 					 SNAP_HDR_LEN - \
 					 ETHERNET_HDR_LEN + \
 					 WORD_ALIGNMENT_PAD)

 #define HOST_HDR_OFFSET			4
 #define ETHERNET_HDR_LEN		14
 #define IP_HDR_LEN			20
 #define IP_HDR_OFFSET			ETHERNET_HDR_LEN
 #define UDP_HDR_OFFSET			(IP_HDR_LEN + IP_HDR_OFFSET)
 #define UDP_HDR_LEN			8
 #define UDP_DATA_OFFSET			(UDP_HDR_OFFSET + UDP_HDR_LEN)
 #define ETH_CONFIG_PKT_HDR_LEN		UDP_DATA_OFFSET

 #define ETH_CONFIG_PKT_HDR_OFFSET	(ETH_ETHERNET_HDR_OFFSET + \
 					 ETH_CONFIG_PKT_HDR_LEN)

 /********************************************
  *
  *      Register Defines
  *
  ********************************************/
 #define WILC_PERIPH_REG_BASE		0x1000
 #define WILC_CHANGING_VIR_IF		0x108c
 #define WILC_CHIPID			WILC_PERIPH_REG_BASE
 #define WILC_GLB_RESET_0		(WILC_PERIPH_REG_BASE + 0x400)
 #define WILC_PIN_MUX_0			(WILC_PERIPH_REG_BASE + 0x408)
 #define WILC_HOST_TX_CTRL		(WILC_PERIPH_REG_BASE + 0x6c)
 #define WILC_HOST_RX_CTRL_0		(WILC_PERIPH_REG_BASE + 0x70)
 #define WILC_HOST_RX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x74)
 #define WILC_HOST_VMM_CTL		(WILC_PERIPH_REG_BASE + 0x78)
 #define WILC_HOST_RX_CTRL		(WILC_PERIPH_REG_BASE + 0x80)
 #define WILC_HOST_RX_EXTRA_SIZE		(WILC_PERIPH_REG_BASE + 0x84)
 #define WILC_HOST_TX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x88)
 #define WILC_MISC			(WILC_PERIPH_REG_BASE + 0x428)
 #define WILC_INTR_REG_BASE		(WILC_PERIPH_REG_BASE + 0xa00)
 #define WILC_INTR_ENABLE		WILC_INTR_REG_BASE
 #define WILC_INTR2_ENABLE		(WILC_INTR_REG_BASE + 4)

 #define WILC_INTR_POLARITY		(WILC_INTR_REG_BASE + 0x10)
 #define WILC_INTR_TYPE			(WILC_INTR_REG_BASE + 0x20)
 #define WILC_INTR_CLEAR			(WILC_INTR_REG_BASE + 0x30)
 #define WILC_INTR_STATUS		(WILC_INTR_REG_BASE + 0x40)

 #define WILC_RF_REVISION_ID		0x13f4

 #define WILC_VMM_TBL_SIZE		64
 #define WILC_VMM_TX_TBL_BASE		0x150400
 #define WILC_VMM_RX_TBL_BASE		0x150500

 #define WILC_VMM_BASE			0x150000
 #define WILC_VMM_CORE_CTL		WILC_VMM_BASE
 #define WILC_VMM_TBL_CTL		(WILC_VMM_BASE + 0x4)
 #define WILC_VMM_TBL_ENTRY		(WILC_VMM_BASE + 0x8)
 #define WILC_VMM_TBL0_SIZE		(WILC_VMM_BASE + 0xc)
 #define WILC_VMM_TO_HOST_SIZE		(WILC_VMM_BASE + 0x10)
 #define WILC_VMM_CORE_CFG		(WILC_VMM_BASE + 0x14)
 #define WILC_VMM_TBL_ACTIVE		(WILC_VMM_BASE + 040)
 #define WILC_VMM_TBL_STATUS		(WILC_VMM_BASE + 0x44)

 #define WILC_SPI_REG_BASE		0xe800
 #define WILC_SPI_CTL			WILC_SPI_REG_BASE
 #define WILC_SPI_MASTER_DMA_ADDR	(WILC_SPI_REG_BASE + 0x4)
 #define WILC_SPI_MASTER_DMA_COUNT	(WILC_SPI_REG_BASE + 0x8)
 #define WILC_SPI_SLAVE_DMA_ADDR		(WILC_SPI_REG_BASE + 0xc)
 #define WILC_SPI_SLAVE_DMA_COUNT	(WILC_SPI_REG_BASE + 0x10)
 #define WILC_SPI_TX_MODE		(WILC_SPI_REG_BASE + 0x20)
 #define WILC_SPI_PROTOCOL_CONFIG	(WILC_SPI_REG_BASE + 0x24)
 #define WILC_SPI_INTR_CTL		(WILC_SPI_REG_BASE + 0x2c)
 #define WILC_SPI_INT_STATUS		(WILC_SPI_REG_BASE + 0x40)
 #define WILC_SPI_INT_CLEAR		(WILC_SPI_REG_BASE + 0x44)

 #define WILC_SPI_WAKEUP_REG		0x1
 #define WILC_SPI_WAKEUP_BIT		BIT(1)

 #define WILC_SPI_PROTOCOL_OFFSET	(WILC_SPI_PROTOCOL_CONFIG - \
 					 WILC_SPI_REG_BASE)

 #define WILC_SPI_CLOCKLESS_ADDR_LIMIT	0x30

 /* Functions IO enables bits */
 #define WILC_SDIO_CCCR_IO_EN_FUNC1	BIT(1)

 /* Function/Interrupt enables bits */
 #define WILC_SDIO_CCCR_IEN_MASTER	BIT(0)
 #define WILC_SDIO_CCCR_IEN_FUNC1	BIT(1)

 /* Abort CCCR register bits */
 #define WILC_SDIO_CCCR_ABORT_RESET	BIT(3)

 /* Vendor specific CCCR registers */
 #define WILC_SDIO_WAKEUP_REG		0xf0
 #define WILC_SDIO_WAKEUP_BIT		BIT(0)

 #define WILC_SDIO_CLK_STATUS_REG	0xf1
 #define WILC_SDIO_CLK_STATUS_BIT	BIT(0)

 #define WILC_SDIO_INTERRUPT_DATA_SZ_REG	0xf2 /* Read size (2 bytes) */

 #define WILC_SDIO_VMM_TBL_CTRL_REG	0xf6
 #define WILC_SDIO_IRQ_FLAG_REG		0xf7
 #define WILC_SDIO_IRQ_CLEAR_FLAG_REG	0xf8

 #define WILC_SDIO_HOST_TO_FW_REG	0xfa
 #define WILC_SDIO_HOST_TO_FW_BIT	BIT(0)

 #define WILC_SDIO_FW_TO_HOST_REG	0xfc
 #define WILC_SDIO_FW_TO_HOST_BIT	BIT(0)

 /* Function 1 specific FBR register */
 #define WILC_SDIO_FBR_CSA_REG		0x10C /* CSA pointer (3 bytes) */
 #define WILC_SDIO_FBR_DATA_REG		0x10F

 #define WILC_SDIO_F1_DATA_REG		0x0
 #define WILC_SDIO_EXT_IRQ_FLAG_REG	0x4

 #define WILC_AHB_DATA_MEM_BASE		0x30000
 #define WILC_AHB_SHARE_MEM_BASE		0xd0000

 #define WILC_VMM_TBL_RX_SHADOW_BASE	WILC_AHB_SHARE_MEM_BASE
 #define WILC_VMM_TBL_RX_SHADOW_SIZE	256

 #define WILC_FW_HOST_COMM		0x13c0
 #define WILC_GP_REG_0			0x149c
 #define WILC_GP_REG_1			0x14a0

 #define WILC_HAVE_SDIO_IRQ_GPIO		BIT(0)
 #define WILC_HAVE_USE_PMU		BIT(1)
 #define WILC_HAVE_SLEEP_CLK_SRC_RTC	BIT(2)
 #define WILC_HAVE_SLEEP_CLK_SRC_XO	BIT(3)
 #define WILC_HAVE_EXT_PA_INV_TX_RX	BIT(4)
 #define WILC_HAVE_LEGACY_RF_SETTINGS	BIT(5)
 #define WILC_HAVE_XTAL_24		BIT(6)
 #define WILC_HAVE_DISABLE_WILC_UART	BIT(7)
 #define WILC_HAVE_USE_IRQ_AS_HOST_WAKE	BIT(8)

 #define WILC_CORTUS_INTERRUPT_BASE	0x10A8
 #define WILC_CORTUS_INTERRUPT_1		(WILC_CORTUS_INTERRUPT_BASE + 0x4)
 #define WILC_CORTUS_INTERRUPT_2		(WILC_CORTUS_INTERRUPT_BASE + 0x8)

 /* tx control register 1 to 4 for RX */
 #define WILC_REG_4_TO_1_RX		0x1e1c

 /* tx control register 1 to 4 for TX Bank_0 */
 #define WILC_REG_4_TO_1_TX_BANK0	0x1e9c

 #define WILC_CORTUS_RESET_MUX_SEL	0x1118
 #define WILC_CORTUS_BOOT_REGISTER	0xc0000

 #define WILC_CORTUS_BOOT_FROM_IRAM	0x71

 #define WILC_1000_BASE_ID		0x100000

 #define WILC_1000_BASE_ID_2A		0x1002A0
 #define WILC_1000_BASE_ID_2A_REV1	(WILC_1000_BASE_ID_2A + 1)

 #define WILC_1000_BASE_ID_2B		0x1002B0
 #define WILC_1000_BASE_ID_2B_REV1	(WILC_1000_BASE_ID_2B + 1)
 #define WILC_1000_BASE_ID_2B_REV2	(WILC_1000_BASE_ID_2B + 2)

 #define WILC_CHIP_REV_FIELD		GENMASK(11, 0)

 /********************************************
  *
  *      Wlan Defines
  *
  ********************************************/
 #define WILC_CFG_PKT		1
 #define WILC_NET_PKT		0
 #define WILC_MGMT_PKT		2

 #define WILC_CFG_SET		1
 #define WILC_CFG_QUERY		0

 #define WILC_CFG_RSP		1
 #define WILC_CFG_RSP_STATUS	2
 #define WILC_CFG_RSP_SCAN	3

 #define WILC_ABORT_REQ_BIT		BIT(31)

 #define WILC_RX_BUFF_SIZE	(96 * 1024)
 #define WILC_TX_BUFF_SIZE	(64 * 1024)

 #define MODALIAS		"WILC_SPI"

 #define WILC_PKT_HDR_CONFIG_FIELD	BIT(31)
 #define WILC_PKT_HDR_OFFSET_FIELD	GENMASK(30, 22)
 #define WILC_PKT_HDR_TOTAL_LEN_FIELD	GENMASK(21, 11)
 #define WILC_PKT_HDR_LEN_FIELD		GENMASK(10, 0)

 #define WILC_INTERRUPT_DATA_SIZE	GENMASK(14, 0)

 #define WILC_VMM_BUFFER_SIZE		GENMASK(9, 0)

 #define WILC_VMM_HDR_TYPE		BIT(31)
 #define WILC_VMM_HDR_MGMT_FIELD		BIT(30)
 #define WILC_VMM_HDR_PKT_SIZE		GENMASK(29, 15)
 #define WILC_VMM_HDR_BUFF_SIZE		GENMASK(14, 0)

 #define WILC_VMM_ENTRY_COUNT		GENMASK(8, 3)
 #define WILC_VMM_ENTRY_AVAILABLE	BIT(2)
 /*******************************************/
 /*        E0 and later Interrupt flags.    */
 /*******************************************/
 /*******************************************/
 /*        E0 and later Interrupt flags.    */
 /*           IRQ Status word               */
 /* 15:0 = DMA count in words.              */
 /* 16: INT0 flag                           */
 /* 17: INT1 flag                           */
 /* 18: INT2 flag                           */
 /* 19: INT3 flag                           */
 /* 20: INT4 flag                           */
 /* 21: INT5 flag                           */
 /*******************************************/
 #define IRG_FLAGS_OFFSET	16
 #define IRQ_DMA_WD_CNT_MASK	GENMASK(IRG_FLAGS_OFFSET - 1, 0)
 #define INT_0			BIT(IRG_FLAGS_OFFSET)
 #define INT_1			BIT(IRG_FLAGS_OFFSET + 1)
 #define INT_2			BIT(IRG_FLAGS_OFFSET + 2)
 #define INT_3			BIT(IRG_FLAGS_OFFSET + 3)
 #define INT_4			BIT(IRG_FLAGS_OFFSET + 4)
 #define INT_5			BIT(IRG_FLAGS_OFFSET + 5)
 #define MAX_NUM_INT		5
 #define IRG_FLAGS_MASK		GENMASK(IRG_FLAGS_OFFSET + MAX_NUM_INT, \
 					IRG_FLAGS_OFFSET)

 /*******************************************/
 /*        E0 and later Interrupt flags.    */
 /*           IRQ Clear word                */
 /* 0: Clear INT0                           */
 /* 1: Clear INT1                           */
 /* 2: Clear INT2                           */
 /* 3: Clear INT3                           */
 /* 4: Clear INT4                           */
 /* 5: Clear INT5                           */
 /* 6: Select VMM table 1                   */
 /* 7: Select VMM table 2                   */
 /* 8: Enable VMM                           */
 /*******************************************/
 #define CLR_INT0		BIT(0)
 #define CLR_INT1		BIT(1)
 #define CLR_INT2		BIT(2)
 #define CLR_INT3		BIT(3)
 #define CLR_INT4		BIT(4)
 #define CLR_INT5		BIT(5)
 #define SEL_VMM_TBL0		BIT(6)
 #define SEL_VMM_TBL1		BIT(7)
 #define EN_VMM			BIT(8)

 #define DATA_INT_EXT		INT_0
 #define ALL_INT_EXT		DATA_INT_EXT
 #define NUM_INT_EXT		1
 #define UNHANDLED_IRQ_MASK	GENMASK(MAX_NUM_INT - 1, NUM_INT_EXT)

 #define DATA_INT_CLR		CLR_INT0

 #define ENABLE_RX_VMM		(SEL_VMM_TBL1 | EN_VMM)
 #define ENABLE_TX_VMM		(SEL_VMM_TBL0 | EN_VMM)
 /* time for expiring the completion of cfg packets */
 #define WILC_CFG_PKTS_TIMEOUT	msecs_to_jiffies(2000)

 #define IS_MANAGMEMENT		0x100
 #define IS_MANAGMEMENT_CALLBACK	0x080
 #define IS_MGMT_STATUS_SUCCES	0x040

 #define WILC_WID_TYPE		GENMASK(15, 12)
 #define WILC_VMM_ENTRY_FULL_RETRY	1
 /********************************************
  *
  *      Tx/Rx Queue Structure
  *
  ********************************************/

 struct txq_entry_t {
 	struct list_head list;
 	int type;
 	int ack_idx;
 	u8 *buffer;
 	int buffer_size;
 	void *priv;
 	int status;
 	struct wilc_vif *vif;
 	void (*tx_complete_func)(void *priv, int status);
 };

 struct rxq_entry_t {
 	struct list_head list;
 	u8 *buffer;
 	int buffer_size;
 };

 /********************************************
  *
  *      Host IF Structure
  *
  ********************************************/
 struct wilc;
 struct wilc_hif_func {
 	int (*hif_init)(struct wilc *wilc, bool resume);
 	int (*hif_deinit)(struct wilc *wilc);
 	int (*hif_read_reg)(struct wilc *wilc, u32 addr, u32 *data);
 	int (*hif_write_reg)(struct wilc *wilc, u32 addr, u32 data);
 	int (*hif_block_rx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
 	int (*hif_block_tx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
 	int (*hif_read_int)(struct wilc *wilc, u32 *int_status);
 	int (*hif_clear_int_ext)(struct wilc *wilc, u32 val);
 	int (*hif_read_size)(struct wilc *wilc, u32 *size);
 	int (*hif_block_tx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
 	int (*hif_block_rx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
 	int (*hif_sync_ext)(struct wilc *wilc, int nint);
 	int (*enable_interrupt)(struct wilc *nic);
 	void (*disable_interrupt)(struct wilc *nic);
 };

 #define WILC_MAX_CFG_FRAME_SIZE		1468

 struct tx_complete_data {
 	int size;
 	void *buff;
 	struct sk_buff *skb;
 };

 struct wilc_cfg_cmd_hdr {
 	u8 cmd_type;
 	u8 seq_no;
 	__le16 total_len;
 	__le32 driver_handler;
 };

 struct wilc_cfg_frame {
 	struct wilc_cfg_cmd_hdr hdr;
 	u8 frame[WILC_MAX_CFG_FRAME_SIZE];
 };

 struct wilc_cfg_rsp {
 	u8 type;
 	u8 seq_no;
 };

 struct wilc;
 struct wilc_vif;

 int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 				u32 buffer_size);
 int wilc_wlan_start(struct wilc *wilc);
 int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif);
 int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
 			      u32 buffer_size,
 			      void (*tx_complete_fn)(void *, int));
 int wilc_wlan_handle_txq(struct wilc *wl, u32 *txq_count);
 void wilc_handle_isr(struct wilc *wilc);
 void wilc_wlan_cleanup(struct net_device *dev);
 int wilc_wlan_cfg_set(struct wilc_vif *vif, int start, u16 wid, u8 *buffer,
 		      u32 buffer_size, int commit, u32 drv_handler);
 int wilc_wlan_cfg_get(struct wilc_vif *vif, int start, u16 wid, int commit,
 		      u32 drv_handler);
 int wilc_wlan_txq_add_mgmt_pkt(struct net_device *dev, void *priv, u8 *buffer,
 			       u32 buffer_size, void (*func)(void *, int));
 void wilc_enable_tcp_ack_filter(struct wilc_vif *vif, bool value);
 int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc);
 netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev);

 void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
 void host_wakeup_notify(struct wilc *wilc);
 void host_sleep_notify(struct wilc *wilc);
 void chip_allow_sleep(struct wilc *wilc);
 void chip_wakeup(struct wilc *wilc);
 int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
 			 u32 count);
 int wilc_wlan_init(struct net_device *dev);
 u32 wilc_get_chipid(struct wilc *wilc, bool update);
 #endif
	/* SPDX-License-Identifier: GPL-2.0 */
	/*
	* Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
	* All rights reserved.
	*/

	#ifndef WILC_WLAN_H
	#define WILC_WLAN_H

	#include <linux/types.h>
	#include <linux/bitfield.h>

	/********************************************
	*
	* Mac eth header length
	*
	********************************************/
	#define MAX_MAC_HDR_LEN 26 /* QOS_MAC_HDR_LEN */
	#define SUB_MSDU_HEADER_LENGTH 14
	#define SNAP_HDR_LEN 8
	#define ETHERNET_HDR_LEN 14
	#define WORD_ALIGNMENT_PAD 0

	#define ETH_ETHERNET_HDR_OFFSET (MAX_MAC_HDR_LEN + \
	SUB_MSDU_HEADER_LENGTH + \
	SNAP_HDR_LEN - \
	ETHERNET_HDR_LEN + \
	WORD_ALIGNMENT_PAD)

	#define HOST_HDR_OFFSET 4
	#define ETHERNET_HDR_LEN 14
	#define IP_HDR_LEN 20
	#define IP_HDR_OFFSET ETHERNET_HDR_LEN
	#define UDP_HDR_OFFSET (IP_HDR_LEN + IP_HDR_OFFSET)
	#define UDP_HDR_LEN 8
	#define UDP_DATA_OFFSET (UDP_HDR_OFFSET + UDP_HDR_LEN)
	#define ETH_CONFIG_PKT_HDR_LEN UDP_DATA_OFFSET

	#define ETH_CONFIG_PKT_HDR_OFFSET (ETH_ETHERNET_HDR_OFFSET + \
	ETH_CONFIG_PKT_HDR_LEN)

	/********************************************
	*
	* Register Defines
	*
	********************************************/
	#define WILC_PERIPH_REG_BASE 0x1000
	#define WILC_CHANGING_VIR_IF 0x108c
	#define WILC_CHIPID WILC_PERIPH_REG_BASE
	#define WILC_GLB_RESET_0 (WILC_PERIPH_REG_BASE + 0x400)
	#define WILC_PIN_MUX_0 (WILC_PERIPH_REG_BASE + 0x408)
	#define WILC_HOST_TX_CTRL (WILC_PERIPH_REG_BASE + 0x6c)
	#define WILC_HOST_RX_CTRL_0 (WILC_PERIPH_REG_BASE + 0x70)
	#define WILC_HOST_RX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x74)
	#define WILC_HOST_VMM_CTL (WILC_PERIPH_REG_BASE + 0x78)
	#define WILC_HOST_RX_CTRL (WILC_PERIPH_REG_BASE + 0x80)
	#define WILC_HOST_RX_EXTRA_SIZE (WILC_PERIPH_REG_BASE + 0x84)
	#define WILC_HOST_TX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x88)
	#define WILC_MISC (WILC_PERIPH_REG_BASE + 0x428)
	#define WILC_INTR_REG_BASE (WILC_PERIPH_REG_BASE + 0xa00)
	#define WILC_INTR_ENABLE WILC_INTR_REG_BASE
	#define WILC_INTR2_ENABLE (WILC_INTR_REG_BASE + 4)

	#define WILC_INTR_POLARITY (WILC_INTR_REG_BASE + 0x10)
	#define WILC_INTR_TYPE (WILC_INTR_REG_BASE + 0x20)
	#define WILC_INTR_CLEAR (WILC_INTR_REG_BASE + 0x30)
	#define WILC_INTR_STATUS (WILC_INTR_REG_BASE + 0x40)

	#define WILC_RF_REVISION_ID 0x13f4

	#define WILC_VMM_TBL_SIZE 64
	#define WILC_VMM_TX_TBL_BASE 0x150400
	#define WILC_VMM_RX_TBL_BASE 0x150500

	#define WILC_VMM_BASE 0x150000
	#define WILC_VMM_CORE_CTL WILC_VMM_BASE
	#define WILC_VMM_TBL_CTL (WILC_VMM_BASE + 0x4)
	#define WILC_VMM_TBL_ENTRY (WILC_VMM_BASE + 0x8)
	#define WILC_VMM_TBL0_SIZE (WILC_VMM_BASE + 0xc)
	#define WILC_VMM_TO_HOST_SIZE (WILC_VMM_BASE + 0x10)
	#define WILC_VMM_CORE_CFG (WILC_VMM_BASE + 0x14)
	#define WILC_VMM_TBL_ACTIVE (WILC_VMM_BASE + 040)
	#define WILC_VMM_TBL_STATUS (WILC_VMM_BASE + 0x44)

	#define WILC_SPI_REG_BASE 0xe800
	#define WILC_SPI_CTL WILC_SPI_REG_BASE
	#define WILC_SPI_MASTER_DMA_ADDR (WILC_SPI_REG_BASE + 0x4)
	#define WILC_SPI_MASTER_DMA_COUNT (WILC_SPI_REG_BASE + 0x8)
	#define WILC_SPI_SLAVE_DMA_ADDR (WILC_SPI_REG_BASE + 0xc)
	#define WILC_SPI_SLAVE_DMA_COUNT (WILC_SPI_REG_BASE + 0x10)
	#define WILC_SPI_TX_MODE (WILC_SPI_REG_BASE + 0x20)
	#define WILC_SPI_PROTOCOL_CONFIG (WILC_SPI_REG_BASE + 0x24)
	#define WILC_SPI_INTR_CTL (WILC_SPI_REG_BASE + 0x2c)
	#define WILC_SPI_INT_STATUS (WILC_SPI_REG_BASE + 0x40)
	#define WILC_SPI_INT_CLEAR (WILC_SPI_REG_BASE + 0x44)

	#define WILC_SPI_WAKEUP_REG 0x1
	#define WILC_SPI_WAKEUP_BIT BIT(1)

	#define WILC_SPI_PROTOCOL_OFFSET (WILC_SPI_PROTOCOL_CONFIG - \
	WILC_SPI_REG_BASE)

	#define WILC_SPI_CLOCKLESS_ADDR_LIMIT 0x30

	/* Functions IO enables bits */
	#define WILC_SDIO_CCCR_IO_EN_FUNC1 BIT(1)

	/* Function/Interrupt enables bits */
	#define WILC_SDIO_CCCR_IEN_MASTER BIT(0)
	#define WILC_SDIO_CCCR_IEN_FUNC1 BIT(1)

	/* Abort CCCR register bits */
	#define WILC_SDIO_CCCR_ABORT_RESET BIT(3)

	/* Vendor specific CCCR registers */
	#define WILC_SDIO_WAKEUP_REG 0xf0
	#define WILC_SDIO_WAKEUP_BIT BIT(0)

	#define WILC_SDIO_CLK_STATUS_REG 0xf1
	#define WILC_SDIO_CLK_STATUS_BIT BIT(0)

	#define WILC_SDIO_INTERRUPT_DATA_SZ_REG 0xf2 /* Read size (2 bytes) */

	#define WILC_SDIO_VMM_TBL_CTRL_REG 0xf6
	#define WILC_SDIO_IRQ_FLAG_REG 0xf7
	#define WILC_SDIO_IRQ_CLEAR_FLAG_REG 0xf8

	#define WILC_SDIO_HOST_TO_FW_REG 0xfa
	#define WILC_SDIO_HOST_TO_FW_BIT BIT(0)

	#define WILC_SDIO_FW_TO_HOST_REG 0xfc
	#define WILC_SDIO_FW_TO_HOST_BIT BIT(0)

	/* Function 1 specific FBR register */
	#define WILC_SDIO_FBR_CSA_REG 0x10C /* CSA pointer (3 bytes) */
	#define WILC_SDIO_FBR_DATA_REG 0x10F

	#define WILC_SDIO_F1_DATA_REG 0x0
	#define WILC_SDIO_EXT_IRQ_FLAG_REG 0x4

	#define WILC_AHB_DATA_MEM_BASE 0x30000
	#define WILC_AHB_SHARE_MEM_BASE 0xd0000

	#define WILC_VMM_TBL_RX_SHADOW_BASE WILC_AHB_SHARE_MEM_BASE
	#define WILC_VMM_TBL_RX_SHADOW_SIZE 256

	#define WILC_FW_HOST_COMM 0x13c0
	#define WILC_GP_REG_0 0x149c
	#define WILC_GP_REG_1 0x14a0

	#define WILC_HAVE_SDIO_IRQ_GPIO BIT(0)
	#define WILC_HAVE_USE_PMU BIT(1)
	#define WILC_HAVE_SLEEP_CLK_SRC_RTC BIT(2)
	#define WILC_HAVE_SLEEP_CLK_SRC_XO BIT(3)
	#define WILC_HAVE_EXT_PA_INV_TX_RX BIT(4)
	#define WILC_HAVE_LEGACY_RF_SETTINGS BIT(5)
	#define WILC_HAVE_XTAL_24 BIT(6)
	#define WILC_HAVE_DISABLE_WILC_UART BIT(7)
	#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE BIT(8)

	#define WILC_CORTUS_INTERRUPT_BASE 0x10A8
	#define WILC_CORTUS_INTERRUPT_1 (WILC_CORTUS_INTERRUPT_BASE + 0x4)
	#define WILC_CORTUS_INTERRUPT_2 (WILC_CORTUS_INTERRUPT_BASE + 0x8)

	/* tx control register 1 to 4 for RX */
	#define WILC_REG_4_TO_1_RX 0x1e1c

	/* tx control register 1 to 4 for TX Bank_0 */
	#define WILC_REG_4_TO_1_TX_BANK0 0x1e9c

	#define WILC_CORTUS_RESET_MUX_SEL 0x1118
	#define WILC_CORTUS_BOOT_REGISTER 0xc0000

	#define WILC_CORTUS_BOOT_FROM_IRAM 0x71

	#define WILC_1000_BASE_ID 0x100000

	#define WILC_1000_BASE_ID_2A 0x1002A0
	#define WILC_1000_BASE_ID_2A_REV1 (WILC_1000_BASE_ID_2A + 1)

	#define WILC_1000_BASE_ID_2B 0x1002B0
	#define WILC_1000_BASE_ID_2B_REV1 (WILC_1000_BASE_ID_2B + 1)
	#define WILC_1000_BASE_ID_2B_REV2 (WILC_1000_BASE_ID_2B + 2)

	#define WILC_CHIP_REV_FIELD GENMASK(11, 0)

	/********************************************
	*
	* Wlan Defines
	*
	********************************************/
	#define WILC_CFG_PKT 1
	#define WILC_NET_PKT 0
	#define WILC_MGMT_PKT 2

	#define WILC_CFG_SET 1
	#define WILC_CFG_QUERY 0

	#define WILC_CFG_RSP 1
	#define WILC_CFG_RSP_STATUS 2
	#define WILC_CFG_RSP_SCAN 3

	#define WILC_ABORT_REQ_BIT BIT(31)

	#define WILC_RX_BUFF_SIZE (96 * 1024)
	#define WILC_TX_BUFF_SIZE (64 * 1024)

	#define MODALIAS "WILC_SPI"

	#define WILC_PKT_HDR_CONFIG_FIELD BIT(31)
	#define WILC_PKT_HDR_OFFSET_FIELD GENMASK(30, 22)
	#define WILC_PKT_HDR_TOTAL_LEN_FIELD GENMASK(21, 11)
	#define WILC_PKT_HDR_LEN_FIELD GENMASK(10, 0)

	#define WILC_INTERRUPT_DATA_SIZE GENMASK(14, 0)

	#define WILC_VMM_BUFFER_SIZE GENMASK(9, 0)

	#define WILC_VMM_HDR_TYPE BIT(31)
	#define WILC_VMM_HDR_MGMT_FIELD BIT(30)
	#define WILC_VMM_HDR_PKT_SIZE GENMASK(29, 15)
	#define WILC_VMM_HDR_BUFF_SIZE GENMASK(14, 0)

	#define WILC_VMM_ENTRY_COUNT GENMASK(8, 3)
	#define WILC_VMM_ENTRY_AVAILABLE BIT(2)
	/*******************************************/
	/* E0 and later Interrupt flags. */
	/*******************************************/
	/*******************************************/
	/* E0 and later Interrupt flags. */
	/* IRQ Status word */
	/* 15:0 = DMA count in words. */
	/* 16: INT0 flag */
	/* 17: INT1 flag */
	/* 18: INT2 flag */
	/* 19: INT3 flag */
	/* 20: INT4 flag */
	/* 21: INT5 flag */
	/*******************************************/
	#define IRG_FLAGS_OFFSET 16
	#define IRQ_DMA_WD_CNT_MASK GENMASK(IRG_FLAGS_OFFSET - 1, 0)
	#define INT_0 BIT(IRG_FLAGS_OFFSET)
	#define INT_1 BIT(IRG_FLAGS_OFFSET + 1)
	#define INT_2 BIT(IRG_FLAGS_OFFSET + 2)
	#define INT_3 BIT(IRG_FLAGS_OFFSET + 3)
	#define INT_4 BIT(IRG_FLAGS_OFFSET + 4)
	#define INT_5 BIT(IRG_FLAGS_OFFSET + 5)
	#define MAX_NUM_INT 5
	#define IRG_FLAGS_MASK GENMASK(IRG_FLAGS_OFFSET + MAX_NUM_INT, \
	IRG_FLAGS_OFFSET)

	/*******************************************/
	/* E0 and later Interrupt flags. */
	/* IRQ Clear word */
	/* 0: Clear INT0 */
	/* 1: Clear INT1 */
	/* 2: Clear INT2 */
	/* 3: Clear INT3 */
	/* 4: Clear INT4 */
	/* 5: Clear INT5 */
	/* 6: Select VMM table 1 */
	/* 7: Select VMM table 2 */
	/* 8: Enable VMM */
	/*******************************************/
	#define CLR_INT0 BIT(0)
	#define CLR_INT1 BIT(1)
	#define CLR_INT2 BIT(2)
	#define CLR_INT3 BIT(3)
	#define CLR_INT4 BIT(4)
	#define CLR_INT5 BIT(5)
	#define SEL_VMM_TBL0 BIT(6)
	#define SEL_VMM_TBL1 BIT(7)
	#define EN_VMM BIT(8)

	#define DATA_INT_EXT INT_0
	#define ALL_INT_EXT DATA_INT_EXT
	#define NUM_INT_EXT 1
	#define UNHANDLED_IRQ_MASK GENMASK(MAX_NUM_INT - 1, NUM_INT_EXT)

	#define DATA_INT_CLR CLR_INT0

	#define ENABLE_RX_VMM (SEL_VMM_TBL1 \| EN_VMM)
	#define ENABLE_TX_VMM (SEL_VMM_TBL0 \| EN_VMM)
	/* time for expiring the completion of cfg packets */
	#define WILC_CFG_PKTS_TIMEOUT msecs_to_jiffies(2000)

	#define IS_MANAGMEMENT 0x100
	#define IS_MANAGMEMENT_CALLBACK 0x080
	#define IS_MGMT_STATUS_SUCCES 0x040

	#define WILC_WID_TYPE GENMASK(15, 12)
	#define WILC_VMM_ENTRY_FULL_RETRY 1
	/********************************************
	*
	* Tx/Rx Queue Structure
	*
	********************************************/

	struct txq_entry_t {
	struct list_head list;
	int type;
	int ack_idx;
	u8 *buffer;
	int buffer_size;
	void *priv;
	int status;
	struct wilc_vif *vif;
	void (tx_complete_func)(void priv, int status);
	};

	struct rxq_entry_t {
	struct list_head list;
	u8 *buffer;
	int buffer_size;
	};

	/********************************************
	*
	* Host IF Structure
	*
	********************************************/
	struct wilc;
	struct wilc_hif_func {
	int (hif_init)(struct wilc wilc, bool resume);
	int (hif_deinit)(struct wilc wilc);
	int (hif_read_reg)(struct wilc wilc, u32 addr, u32 *data);
	int (hif_write_reg)(struct wilc wilc, u32 addr, u32 data);
	int (hif_block_rx)(struct wilc wilc, u32 addr, u8 *buf, u32 size);
	int (hif_block_tx)(struct wilc wilc, u32 addr, u8 *buf, u32 size);
	int (hif_read_int)(struct wilc wilc, u32 *int_status);
	int (hif_clear_int_ext)(struct wilc wilc, u32 val);
	int (hif_read_size)(struct wilc wilc, u32 *size);
	int (hif_block_tx_ext)(struct wilc wilc, u32 addr, u8 *buf, u32 size);
	int (hif_block_rx_ext)(struct wilc wilc, u32 addr, u8 *buf, u32 size);
	int (hif_sync_ext)(struct wilc wilc, int nint);
	int (enable_interrupt)(struct wilc nic);
	void (disable_interrupt)(struct wilc nic);
	};

	#define WILC_MAX_CFG_FRAME_SIZE 1468

	struct tx_complete_data {
	int size;
	void *buff;
	struct sk_buff *skb;
	};

	struct wilc_cfg_cmd_hdr {
	u8 cmd_type;
	u8 seq_no;
	__le16 total_len;
	__le32 driver_handler;
	};

	struct wilc_cfg_frame {
	struct wilc_cfg_cmd_hdr hdr;
	u8 frame[WILC_MAX_CFG_FRAME_SIZE];
	};

	struct wilc_cfg_rsp {
	u8 type;
	u8 seq_no;
	};

	struct wilc;
	struct wilc_vif;

	int wilc_wlan_firmware_download(struct wilc wilc, const u8 buffer,
	u32 buffer_size);
	int wilc_wlan_start(struct wilc *wilc);
	int wilc_wlan_stop(struct wilc wilc, struct wilc_vif vif);
	int wilc_wlan_txq_add_net_pkt(struct net_device dev, void priv, u8 *buffer,
	u32 buffer_size,
	void (tx_complete_fn)(void , int));
	int wilc_wlan_handle_txq(struct wilc wl, u32 txq_count);
	void wilc_handle_isr(struct wilc *wilc);
	void wilc_wlan_cleanup(struct net_device *dev);
	int wilc_wlan_cfg_set(struct wilc_vif vif, int start, u16 wid, u8 buffer,
	u32 buffer_size, int commit, u32 drv_handler);
	int wilc_wlan_cfg_get(struct wilc_vif *vif, int start, u16 wid, int commit,
	u32 drv_handler);
	int wilc_wlan_txq_add_mgmt_pkt(struct net_device dev, void priv, u8 *buffer,
	u32 buffer_size, void (func)(void , int));
	void wilc_enable_tcp_ack_filter(struct wilc_vif *vif, bool value);
	int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc);
	netdev_tx_t wilc_mac_xmit(struct sk_buff skb, struct net_device dev);

	void wilc_wfi_p2p_rx(struct wilc_vif vif, u8 buff, u32 size);
	void host_wakeup_notify(struct wilc *wilc);
	void host_sleep_notify(struct wilc *wilc);
	void chip_allow_sleep(struct wilc *wilc);
	void chip_wakeup(struct wilc *wilc);
	int wilc_send_config_pkt(struct wilc_vif vif, u8 mode, struct wid wids,
	u32 count);
	int wilc_wlan_init(struct net_device *dev);
	u32 wilc_get_chipid(struct wilc *wilc, bool update);
	#endif