| menuconfig SND_SOC_SAMSUNG |
| tristate "ASoC support for Samsung" |
| depends on (PLAT_SAMSUNG || ARCH_EXYNOS) |
| select SND_SOC_GENERIC_DMAENGINE_PCM |
| ---help--- |
| Say Y or M if you want to add support for codecs attached to |
| the Samsung SoCs' Audio interfaces. You will also need to |
| select the audio interfaces to support below. |
| |
| if SND_SOC_SAMSUNG |
| |
| config SND_S3C24XX_I2S |
| tristate |
| |
| config SND_S3C_I2SV2_SOC |
| tristate |
| |
| config SND_S3C2412_SOC_I2S |
| tristate |
| select SND_S3C_I2SV2_SOC |
| |
| config SND_SAMSUNG_PCM |
| tristate "Samsung PCM interface support" |
| |
| config SND_SAMSUNG_AC97 |
| tristate |
| select SND_SOC_AC97_BUS |
| |
| config SND_SAMSUNG_SPDIF |
| tristate "Samsung SPDIF transmitter support" |
| select SND_SOC_SPDIF |
| |
| config SND_SAMSUNG_I2S |
| tristate "Samsung I2S interface support" |
| |
| config SND_SOC_SAMSUNG_NEO1973_WM8753 |
| tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)" |
| depends on MACH_NEO1973_GTA02 |
| select SND_S3C24XX_I2S |
| select SND_SOC_WM8753 |
| select SND_SOC_BT_SCO |
| help |
| Say Y here to enable audio support for the Openmoko Neo1973 |
| Smartphones. |
| |
| config SND_SOC_SAMSUNG_JIVE_WM8750 |
| tristate "SoC I2S Audio support for Jive" |
| depends on MACH_JIVE && I2C |
| select SND_SOC_WM8750 |
| select SND_S3C2412_SOC_I2S |
| help |
| Say Y if you want to add support for SoC audio on the Jive. |
| |
| config SND_SOC_SAMSUNG_SMDK_WM8580 |
| tristate "SoC I2S Audio support for WM8580 on SMDK" |
| depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 |
| depends on I2C |
| select SND_SOC_WM8580 |
| select SND_SAMSUNG_I2S |
| help |
| Say Y if you want to add support for SoC audio on the SMDKs. |
| |
| config SND_SOC_SAMSUNG_SMDK_WM8994 |
| tristate "SoC I2S Audio support for WM8994 on SMDK" |
| depends on I2C=y |
| select MFD_WM8994 |
| select SND_SOC_WM8994 |
| select SND_SAMSUNG_I2S |
| help |
| Say Y if you want to add support for SoC audio on the SMDKs. |
| |
| config SND_SOC_SAMSUNG_SMDK2443_WM9710 |
| tristate "SoC AC97 Audio support for SMDK2443 - WM9710" |
| depends on MACH_SMDK2443 |
| select AC97_BUS |
| select SND_SOC_AC97_CODEC |
| select SND_SAMSUNG_AC97 |
| help |
| Say Y if you want to add support for SoC audio on smdk2443 |
| with the WM9710. |
| |
| config SND_SOC_SAMSUNG_LN2440SBC_ALC650 |
| tristate "SoC AC97 Audio support for LN2440SBC - ALC650" |
| depends on ARCH_S3C24XX |
| select AC97_BUS |
| select SND_SOC_AC97_CODEC |
| select SND_SAMSUNG_AC97 |
| help |
| Say Y if you want to add support for SoC audio on ln2440sbc |
| with the ALC650. |
| |
| config SND_SOC_SAMSUNG_S3C24XX_UDA134X |
| tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" |
| depends on ARCH_S3C24XX |
| select SND_S3C24XX_I2S |
| select SND_SOC_L3 |
| select SND_SOC_UDA134X |
| |
| config SND_SOC_SAMSUNG_SIMTEC |
| tristate |
| help |
| Internal node for common S3C24XX/Simtec suppor |
| |
| config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 |
| tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" |
| depends on ARCH_S3C24XX && I2C |
| select SND_S3C24XX_I2S |
| select SND_SOC_TLV320AIC23_I2C |
| select SND_SOC_SAMSUNG_SIMTEC |
| |
| config SND_SOC_SAMSUNG_SIMTEC_HERMES |
| tristate "SoC I2S Audio support for Simtec Hermes board" |
| depends on ARCH_S3C24XX && I2C |
| select SND_S3C24XX_I2S |
| select SND_SOC_TLV320AIC3X |
| select SND_SOC_SAMSUNG_SIMTEC |
| |
| config SND_SOC_SAMSUNG_H1940_UDA1380 |
| tristate "Audio support for the HP iPAQ H1940" |
| depends on ARCH_H1940 && I2C |
| select SND_S3C24XX_I2S |
| select SND_SOC_UDA1380 |
| help |
| This driver provides audio support for HP iPAQ h1940 PDA. |
| |
| config SND_SOC_SAMSUNG_RX1950_UDA1380 |
| tristate "Audio support for the HP iPAQ RX1950" |
| depends on MACH_RX1950 && I2C |
| select SND_S3C24XX_I2S |
| select SND_SOC_UDA1380 |
| help |
| This driver provides audio support for HP iPAQ RX1950 PDA. |
| |
| config SND_SOC_SAMSUNG_SMDK_WM9713 |
| tristate "SoC AC97 Audio support for SMDK with WM9713" |
| depends on MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 |
| select SND_SOC_WM9713 |
| select SND_SAMSUNG_AC97 |
| help |
| Say Y if you want to add support for SoC audio on the SMDK. |
| |
| config SND_SOC_SMARTQ |
| tristate "SoC I2S Audio support for SmartQ board" |
| depends on MACH_SMARTQ && I2C |
| select SND_SAMSUNG_I2S |
| select SND_SOC_WM8750 |
| |
| config SND_SOC_SAMSUNG_SMDK_SPDIF |
| tristate "SoC S/PDIF Audio support for SMDK" |
| select SND_SAMSUNG_SPDIF |
| help |
| Say Y if you want to add support for SoC S/PDIF audio on the SMDK. |
| |
| config SND_SOC_SMDK_WM8580_PCM |
| tristate "SoC PCM Audio support for WM8580 on SMDK" |
| depends on MACH_SMDKV210 || MACH_SMDKC110 |
| depends on I2C |
| select SND_SOC_WM8580 |
| select SND_SAMSUNG_PCM |
| help |
| Say Y if you want to add support for SoC audio on the SMDK. |
| |
| config SND_SOC_SMDK_WM8994_PCM |
| tristate "SoC PCM Audio support for WM8994 on SMDK" |
| depends on I2C=y |
| select MFD_WM8994 |
| select SND_SOC_WM8994 |
| select SND_SAMSUNG_PCM |
| help |
| Say Y if you want to add support for SoC audio on the SMDK |
| |
| config SND_SOC_SPEYSIDE |
| tristate "Audio support for Wolfson Speyside" |
| depends on I2C && SPI_MASTER |
| depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST |
| select SND_SAMSUNG_I2S |
| select SND_SOC_WM8996 |
| select SND_SOC_WM9081 |
| select SND_SOC_WM0010 |
| select SND_SOC_WM1250_EV1 |
| |
| config SND_SOC_TOBERMORY |
| tristate "Audio support for Wolfson Tobermory" |
| depends on INPUT && I2C |
| depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST |
| select SND_SAMSUNG_I2S |
| select SND_SOC_WM8962 |
| |
| config SND_SOC_BELLS |
| tristate "Audio support for Wolfson Bells" |
| depends on MFD_ARIZONA && I2C && SPI_MASTER |
| depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST |
| select SND_SAMSUNG_I2S |
| select SND_SOC_WM5102 |
| select SND_SOC_WM5110 |
| select SND_SOC_WM9081 |
| select SND_SOC_WM0010 |
| select SND_SOC_WM1250_EV1 |
| |
| config SND_SOC_LOWLAND |
| tristate "Audio support for Wolfson Lowland" |
| depends on I2C |
| depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST |
| select SND_SAMSUNG_I2S |
| select SND_SOC_WM5100 |
| select SND_SOC_WM9081 |
| |
| config SND_SOC_LITTLEMILL |
| tristate "Audio support for Wolfson Littlemill" |
| depends on I2C |
| depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST |
| select SND_SAMSUNG_I2S |
| select MFD_WM8994 |
| select SND_SOC_WM8994 |
| |
| config SND_SOC_SNOW |
| tristate "Audio support for Google Snow boards" |
| depends on I2C |
| select SND_SOC_MAX98090 |
| select SND_SOC_MAX98095 |
| select SND_SAMSUNG_I2S |
| help |
| Say Y if you want to add audio support for various Snow |
| boards based on Exynos5 series of SoCs. |
| |
| config SND_SOC_ARNDALE_RT5631_ALC5631 |
| tristate "Audio support for RT5631(ALC5631) on Arndale Board" |
| depends on I2C |
| select SND_SAMSUNG_I2S |
| select SND_SOC_RT5631 |
| |
| endif #SND_SOC_SAMSUNG |
