| /* ----------------------------------------------------------------------------- |
| * Copyright (c) 2011 Ozmo Inc |
| * Released under the GNU General Public License Version 2 (GPLv2). |
| * |
| * This file provides the implementation of a USB host controller device that |
| * does not have any associated hardware. Instead the virtual device is |
| * connected to the WiFi network and emulates the operation of a USB hcd by |
| * receiving and sending network frames. |
| * Note: |
| * We take great pains to reduce the amount of code where interrupts need to be |
| * disabled and in this respect we are different from standard HCD's. In |
| * particular we don't want in_irq() code bleeding over to the protocol side of |
| * the driver. |
| * The troublesome functions are the urb enqueue and dequeue functions both of |
| * which can be called in_irq(). So for these functions we put the urbs into a |
| * queue and request a tasklet to process them. This means that a spinlock with |
| * interrupts disabled must be held for insertion and removal but most code is |
| * is in tasklet or soft irq context. The lock that protects this list is called |
| * the tasklet lock and serves the purpose of the 'HCD lock' which must be held |
| * when calling the following functions. |
| * usb_hcd_link_urb_to_ep() |
| * usb_hcd_unlink_urb_from_ep() |
| * usb_hcd_flush_endpoint() |
| * usb_hcd_check_unlink_urb() |
| * ----------------------------------------------------------------------------- |
| */ |
| #include <linux/platform_device.h> |
| #include <linux/usb.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include "linux/usb/hcd.h" |
| #include <asm/unaligned.h> |
| #include "ozdbg.h" |
| #include "ozusbif.h" |
| #include "ozurbparanoia.h" |
| #include "ozhcd.h" |
| |
| /* |
| * Number of units of buffering to capture for an isochronous IN endpoint before |
| * allowing data to be indicated up. |
| */ |
| #define OZ_IN_BUFFERING_UNITS 100 |
| |
| /* Name of our platform device. |
| */ |
| #define OZ_PLAT_DEV_NAME "ozwpan" |
| |
| /* Maximum number of free urb links that can be kept in the pool. |
| */ |
| #define OZ_MAX_LINK_POOL_SIZE 16 |
| |
| /* Get endpoint object from the containing link. |
| */ |
| #define ep_from_link(__e) container_of((__e), struct oz_endpoint, link) |
| |
| /*EP0 timeout before ep0 request is again added to TX queue. (13*8 = 98mSec) |
| */ |
| #define EP0_TIMEOUT_COUNTER 13 |
| |
| /* Debounce time HCD driver should wait before unregistering. |
| */ |
| #define OZ_HUB_DEBOUNCE_TIMEOUT 1500 |
| |
| /* |
| * Used to link urbs together and also store some status information for each |
| * urb. |
| * A cache of these are kept in a pool to reduce number of calls to kmalloc. |
| */ |
| struct oz_urb_link { |
| struct list_head link; |
| struct urb *urb; |
| struct oz_port *port; |
| u8 req_id; |
| u8 ep_num; |
| unsigned submit_counter; |
| }; |
| |
| /* Holds state information about a USB endpoint. |
| */ |
| #define OZ_EP_BUFFER_SIZE_ISOC (1024 * 24) |
| #define OZ_EP_BUFFER_SIZE_INT 512 |
| struct oz_endpoint { |
| struct list_head urb_list; /* List of oz_urb_link items. */ |
| struct list_head link; /* For isoc ep, links in to isoc |
| lists of oz_port. */ |
| struct timespec timestamp; |
| int credit; |
| int credit_ceiling; |
| u8 ep_num; |
| u8 attrib; |
| u8 *buffer; |
| int buffer_size; |
| int in_ix; |
| int out_ix; |
| int buffered_units; |
| unsigned flags; |
| int start_frame; |
| }; |
| |
| /* Bits in the flags field. */ |
| #define OZ_F_EP_BUFFERING 0x1 |
| #define OZ_F_EP_HAVE_STREAM 0x2 |
| |
| /* Holds state information about a USB interface. |
| */ |
| struct oz_interface { |
| unsigned ep_mask; |
| u8 alt; |
| }; |
| |
| /* Holds state information about an hcd port. |
| */ |
| #define OZ_NB_ENDPOINTS 16 |
| struct oz_port { |
| unsigned flags; |
| unsigned status; |
| void *hpd; |
| struct oz_hcd *ozhcd; |
| spinlock_t port_lock; |
| u8 bus_addr; |
| u8 next_req_id; |
| u8 config_num; |
| int num_iface; |
| struct oz_interface *iface; |
| struct oz_endpoint *out_ep[OZ_NB_ENDPOINTS]; |
| struct oz_endpoint *in_ep[OZ_NB_ENDPOINTS]; |
| struct list_head isoc_out_ep; |
| struct list_head isoc_in_ep; |
| }; |
| |
| #define OZ_PORT_F_PRESENT 0x1 |
| #define OZ_PORT_F_CHANGED 0x2 |
| #define OZ_PORT_F_DYING 0x4 |
| |
| /* Data structure in the private context area of struct usb_hcd. |
| */ |
| #define OZ_NB_PORTS 8 |
| struct oz_hcd { |
| spinlock_t hcd_lock; |
| struct list_head urb_pending_list; |
| struct list_head urb_cancel_list; |
| struct list_head orphanage; |
| int conn_port; /* Port that is currently connecting, -1 if none.*/ |
| struct oz_port ports[OZ_NB_PORTS]; |
| uint flags; |
| struct usb_hcd *hcd; |
| }; |
| |
| /* Bits in flags field. |
| */ |
| #define OZ_HDC_F_SUSPENDED 0x1 |
| |
| /* |
| * Static function prototypes. |
| */ |
| static int oz_hcd_start(struct usb_hcd *hcd); |
| static void oz_hcd_stop(struct usb_hcd *hcd); |
| static void oz_hcd_shutdown(struct usb_hcd *hcd); |
| static int oz_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, |
| gfp_t mem_flags); |
| static int oz_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); |
| static void oz_hcd_endpoint_disable(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep); |
| static void oz_hcd_endpoint_reset(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep); |
| static int oz_hcd_get_frame_number(struct usb_hcd *hcd); |
| static int oz_hcd_hub_status_data(struct usb_hcd *hcd, char *buf); |
| static int oz_hcd_hub_control(struct usb_hcd *hcd, u16 req_type, u16 wvalue, |
| u16 windex, char *buf, u16 wlength); |
| static int oz_hcd_bus_suspend(struct usb_hcd *hcd); |
| static int oz_hcd_bus_resume(struct usb_hcd *hcd); |
| static int oz_plat_probe(struct platform_device *dev); |
| static int oz_plat_remove(struct platform_device *dev); |
| static void oz_plat_shutdown(struct platform_device *dev); |
| static int oz_plat_suspend(struct platform_device *dev, pm_message_t msg); |
| static int oz_plat_resume(struct platform_device *dev); |
| static void oz_urb_process_tasklet(unsigned long unused); |
| static int oz_build_endpoints_for_config(struct usb_hcd *hcd, |
| struct oz_port *port, struct usb_host_config *config, |
| gfp_t mem_flags); |
| static void oz_clean_endpoints_for_config(struct usb_hcd *hcd, |
| struct oz_port *port); |
| static int oz_build_endpoints_for_interface(struct usb_hcd *hcd, |
| struct oz_port *port, |
| struct usb_host_interface *intf, gfp_t mem_flags); |
| static void oz_clean_endpoints_for_interface(struct usb_hcd *hcd, |
| struct oz_port *port, int if_ix); |
| static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb, |
| gfp_t mem_flags); |
| static struct oz_urb_link *oz_remove_urb(struct oz_endpoint *ep, |
| struct urb *urb); |
| static void oz_hcd_clear_orphanage(struct oz_hcd *ozhcd, int status); |
| |
| /* |
| * Static external variables. |
| */ |
| static struct platform_device *g_plat_dev; |
| static struct oz_hcd *g_ozhcd; |
| static DEFINE_SPINLOCK(g_hcdlock); /* Guards g_ozhcd. */ |
| static const char g_hcd_name[] = "Ozmo WPAN"; |
| static struct list_head *g_link_pool; |
| static int g_link_pool_size; |
| static DEFINE_SPINLOCK(g_link_lock); |
| static DEFINE_SPINLOCK(g_tasklet_lock); |
| static struct tasklet_struct g_urb_process_tasklet; |
| static struct tasklet_struct g_urb_cancel_tasklet; |
| static atomic_t g_pending_urbs = ATOMIC_INIT(0); |
| static atomic_t g_usb_frame_number = ATOMIC_INIT(0); |
| static const struct hc_driver g_oz_hc_drv = { |
| .description = g_hcd_name, |
| .product_desc = "Ozmo Devices WPAN", |
| .hcd_priv_size = sizeof(struct oz_hcd), |
| .flags = HCD_USB11, |
| .start = oz_hcd_start, |
| .stop = oz_hcd_stop, |
| .shutdown = oz_hcd_shutdown, |
| .urb_enqueue = oz_hcd_urb_enqueue, |
| .urb_dequeue = oz_hcd_urb_dequeue, |
| .endpoint_disable = oz_hcd_endpoint_disable, |
| .endpoint_reset = oz_hcd_endpoint_reset, |
| .get_frame_number = oz_hcd_get_frame_number, |
| .hub_status_data = oz_hcd_hub_status_data, |
| .hub_control = oz_hcd_hub_control, |
| .bus_suspend = oz_hcd_bus_suspend, |
| .bus_resume = oz_hcd_bus_resume, |
| }; |
| |
| static struct platform_driver g_oz_plat_drv = { |
| .probe = oz_plat_probe, |
| .remove = oz_plat_remove, |
| .shutdown = oz_plat_shutdown, |
| .suspend = oz_plat_suspend, |
| .resume = oz_plat_resume, |
| .driver = { |
| .name = OZ_PLAT_DEV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| /* |
| * Gets our private context area (which is of type struct oz_hcd) from the |
| * usb_hcd structure. |
| * Context: any |
| */ |
| static inline struct oz_hcd *oz_hcd_private(struct usb_hcd *hcd) |
| { |
| return (struct oz_hcd *)hcd->hcd_priv; |
| } |
| |
| /* |
| * Searches list of ports to find the index of the one with a specified USB |
| * bus address. If none of the ports has the bus address then the connection |
| * port is returned, if there is one or -1 otherwise. |
| * Context: any |
| */ |
| static int oz_get_port_from_addr(struct oz_hcd *ozhcd, u8 bus_addr) |
| { |
| int i; |
| |
| for (i = 0; i < OZ_NB_PORTS; i++) { |
| if (ozhcd->ports[i].bus_addr == bus_addr) |
| return i; |
| } |
| return ozhcd->conn_port; |
| } |
| |
| /* |
| * Allocates an urb link, first trying the pool but going to heap if empty. |
| * Context: any |
| */ |
| static struct oz_urb_link *oz_alloc_urb_link(void) |
| { |
| struct oz_urb_link *urbl = NULL; |
| unsigned long irq_state; |
| |
| spin_lock_irqsave(&g_link_lock, irq_state); |
| if (g_link_pool) { |
| urbl = container_of(g_link_pool, struct oz_urb_link, link); |
| g_link_pool = urbl->link.next; |
| --g_link_pool_size; |
| } |
| spin_unlock_irqrestore(&g_link_lock, irq_state); |
| if (urbl == NULL) |
| urbl = kmalloc(sizeof(struct oz_urb_link), GFP_ATOMIC); |
| return urbl; |
| } |
| |
| /* |
| * Frees an urb link by putting it in the pool if there is enough space or |
| * deallocating it to heap otherwise. |
| * Context: any |
| */ |
| static void oz_free_urb_link(struct oz_urb_link *urbl) |
| { |
| if (urbl) { |
| unsigned long irq_state; |
| spin_lock_irqsave(&g_link_lock, irq_state); |
| if (g_link_pool_size < OZ_MAX_LINK_POOL_SIZE) { |
| urbl->link.next = g_link_pool; |
| g_link_pool = &urbl->link; |
| urbl = NULL; |
| g_link_pool_size++; |
| } |
| spin_unlock_irqrestore(&g_link_lock, irq_state); |
| kfree(urbl); |
| } |
| } |
| |
| /* |
| * Deallocates all the urb links in the pool. |
| * Context: unknown |
| */ |
| static void oz_empty_link_pool(void) |
| { |
| struct list_head *e; |
| unsigned long irq_state; |
| |
| spin_lock_irqsave(&g_link_lock, irq_state); |
| e = g_link_pool; |
| g_link_pool = NULL; |
| g_link_pool_size = 0; |
| spin_unlock_irqrestore(&g_link_lock, irq_state); |
| while (e) { |
| struct oz_urb_link *urbl = |
| container_of(e, struct oz_urb_link, link); |
| e = e->next; |
| kfree(urbl); |
| } |
| } |
| |
| /* |
| * Allocates endpoint structure and optionally a buffer. If a buffer is |
| * allocated it immediately follows the endpoint structure. |
| * Context: softirq |
| */ |
| static struct oz_endpoint *oz_ep_alloc(int buffer_size, gfp_t mem_flags) |
| { |
| struct oz_endpoint *ep = |
| kzalloc(sizeof(struct oz_endpoint)+buffer_size, mem_flags); |
| if (ep) { |
| INIT_LIST_HEAD(&ep->urb_list); |
| INIT_LIST_HEAD(&ep->link); |
| ep->credit = -1; |
| if (buffer_size) { |
| ep->buffer_size = buffer_size; |
| ep->buffer = (u8 *)(ep+1); |
| } |
| } |
| return ep; |
| } |
| |
| /* |
| * Pre-condition: Must be called with g_tasklet_lock held and interrupts |
| * disabled. |
| * Context: softirq or process |
| */ |
| static struct oz_urb_link *oz_uncancel_urb(struct oz_hcd *ozhcd, |
| struct urb *urb) |
| { |
| struct oz_urb_link *urbl; |
| struct list_head *e; |
| |
| list_for_each(e, &ozhcd->urb_cancel_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| if (urb == urbl->urb) { |
| list_del_init(e); |
| return urbl; |
| } |
| } |
| return NULL; |
| } |
| |
| /* |
| * This is called when we have finished processing an urb. It unlinks it from |
| * the ep and returns it to the core. |
| * Context: softirq or process |
| */ |
| static void oz_complete_urb(struct usb_hcd *hcd, struct urb *urb, |
| int status) |
| { |
| struct oz_hcd *ozhcd = oz_hcd_private(hcd); |
| unsigned long irq_state; |
| struct oz_urb_link *cancel_urbl; |
| |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| usb_hcd_unlink_urb_from_ep(hcd, urb); |
| /* Clear hcpriv which will prevent it being put in the cancel list |
| * in the event that an attempt is made to cancel it. |
| */ |
| urb->hcpriv = NULL; |
| /* Walk the cancel list in case the urb is already sitting there. |
| * Since we process the cancel list in a tasklet rather than in |
| * the dequeue function this could happen. |
| */ |
| cancel_urbl = oz_uncancel_urb(ozhcd, urb); |
| /* Note: we release lock but do not enable local irqs. |
| * It appears that usb_hcd_giveback_urb() expects irqs to be disabled, |
| * or at least other host controllers disable interrupts at this point |
| * so we do the same. We must, however, release the lock otherwise a |
| * deadlock will occur if an urb is submitted to our driver in the urb |
| * completion function. Because we disable interrupts it is possible |
| * that the urb_enqueue function can be called with them disabled. |
| */ |
| spin_unlock(&g_tasklet_lock); |
| if (oz_forget_urb(urb)) { |
| oz_dbg(ON, "ERROR Unknown URB %p\n", urb); |
| } else { |
| atomic_dec(&g_pending_urbs); |
| usb_hcd_giveback_urb(hcd, urb, status); |
| } |
| spin_lock(&g_tasklet_lock); |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| if (cancel_urbl) |
| oz_free_urb_link(cancel_urbl); |
| } |
| |
| /* |
| * Deallocates an endpoint including deallocating any associated stream and |
| * returning any queued urbs to the core. |
| * Context: softirq |
| */ |
| static void oz_ep_free(struct oz_port *port, struct oz_endpoint *ep) |
| { |
| if (port) { |
| struct list_head list; |
| struct oz_hcd *ozhcd = port->ozhcd; |
| INIT_LIST_HEAD(&list); |
| if (ep->flags & OZ_F_EP_HAVE_STREAM) |
| oz_usb_stream_delete(port->hpd, ep->ep_num); |
| /* Transfer URBs to the orphanage while we hold the lock. */ |
| spin_lock_bh(&ozhcd->hcd_lock); |
| /* Note: this works even if ep->urb_list is empty.*/ |
| list_replace_init(&ep->urb_list, &list); |
| /* Put the URBs in the orphanage. */ |
| list_splice_tail(&list, &ozhcd->orphanage); |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| } |
| oz_dbg(ON, "Freeing endpoint memory\n"); |
| kfree(ep); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static void oz_complete_buffered_urb(struct oz_port *port, |
| struct oz_endpoint *ep, |
| struct urb *urb) |
| { |
| int data_len, available_space, copy_len; |
| |
| data_len = ep->buffer[ep->out_ix]; |
| if (data_len <= urb->transfer_buffer_length) |
| available_space = data_len; |
| else |
| available_space = urb->transfer_buffer_length; |
| |
| if (++ep->out_ix == ep->buffer_size) |
| ep->out_ix = 0; |
| copy_len = ep->buffer_size - ep->out_ix; |
| if (copy_len >= available_space) |
| copy_len = available_space; |
| memcpy(urb->transfer_buffer, &ep->buffer[ep->out_ix], copy_len); |
| |
| if (copy_len < available_space) { |
| memcpy((urb->transfer_buffer + copy_len), ep->buffer, |
| (available_space - copy_len)); |
| ep->out_ix = available_space - copy_len; |
| } else { |
| ep->out_ix += copy_len; |
| } |
| urb->actual_length = available_space; |
| if (ep->out_ix == ep->buffer_size) |
| ep->out_ix = 0; |
| |
| ep->buffered_units--; |
| oz_dbg(ON, "Trying to give back buffered frame of size=%d\n", |
| available_space); |
| oz_complete_urb(port->ozhcd->hcd, urb, 0); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static int oz_enqueue_ep_urb(struct oz_port *port, u8 ep_addr, int in_dir, |
| struct urb *urb, u8 req_id) |
| { |
| struct oz_urb_link *urbl; |
| struct oz_endpoint *ep = NULL; |
| int err = 0; |
| |
| if (ep_addr >= OZ_NB_ENDPOINTS) { |
| oz_dbg(ON, "%s: Invalid endpoint number\n", __func__); |
| return -EINVAL; |
| } |
| urbl = oz_alloc_urb_link(); |
| if (!urbl) |
| return -ENOMEM; |
| urbl->submit_counter = 0; |
| urbl->urb = urb; |
| urbl->req_id = req_id; |
| urbl->ep_num = ep_addr; |
| /* Hold lock while we insert the URB into the list within the |
| * endpoint structure. |
| */ |
| spin_lock_bh(&port->ozhcd->hcd_lock); |
| /* If the urb has been unlinked while out of any list then |
| * complete it now. |
| */ |
| if (urb->unlinked) { |
| spin_unlock_bh(&port->ozhcd->hcd_lock); |
| oz_dbg(ON, "urb %p unlinked so complete immediately\n", urb); |
| oz_complete_urb(port->ozhcd->hcd, urb, 0); |
| oz_free_urb_link(urbl); |
| return 0; |
| } |
| |
| if (in_dir) |
| ep = port->in_ep[ep_addr]; |
| else |
| ep = port->out_ep[ep_addr]; |
| if (!ep) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| /*For interrupt endpoint check for buffered data |
| * & complete urb |
| */ |
| if (((ep->attrib & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) |
| && ep->buffered_units > 0) { |
| oz_free_urb_link(urbl); |
| spin_unlock_bh(&port->ozhcd->hcd_lock); |
| oz_complete_buffered_urb(port, ep, urb); |
| return 0; |
| } |
| |
| if (port->hpd) { |
| list_add_tail(&urbl->link, &ep->urb_list); |
| if (!in_dir && ep_addr && (ep->credit < 0)) { |
| getrawmonotonic(&ep->timestamp); |
| ep->credit = 0; |
| } |
| } else { |
| err = -EPIPE; |
| } |
| out: |
| spin_unlock_bh(&port->ozhcd->hcd_lock); |
| if (err) |
| oz_free_urb_link(urbl); |
| return err; |
| } |
| |
| /* |
| * Removes an urb from the queue in the endpoint. |
| * Returns 0 if it is found and -EIDRM otherwise. |
| * Context: softirq |
| */ |
| static int oz_dequeue_ep_urb(struct oz_port *port, u8 ep_addr, int in_dir, |
| struct urb *urb) |
| { |
| struct oz_urb_link *urbl = NULL; |
| struct oz_endpoint *ep; |
| |
| spin_lock_bh(&port->ozhcd->hcd_lock); |
| if (in_dir) |
| ep = port->in_ep[ep_addr]; |
| else |
| ep = port->out_ep[ep_addr]; |
| if (ep) { |
| struct list_head *e; |
| list_for_each(e, &ep->urb_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| if (urbl->urb == urb) { |
| list_del_init(e); |
| break; |
| } |
| urbl = NULL; |
| } |
| } |
| spin_unlock_bh(&port->ozhcd->hcd_lock); |
| if (urbl) |
| oz_free_urb_link(urbl); |
| return urbl ? 0 : -EIDRM; |
| } |
| |
| /* |
| * Finds an urb given its request id. |
| * Context: softirq |
| */ |
| static struct urb *oz_find_urb_by_id(struct oz_port *port, int ep_ix, |
| u8 req_id) |
| { |
| struct oz_hcd *ozhcd = port->ozhcd; |
| struct urb *urb = NULL; |
| struct oz_urb_link *urbl; |
| struct oz_endpoint *ep; |
| |
| spin_lock_bh(&ozhcd->hcd_lock); |
| ep = port->out_ep[ep_ix]; |
| if (ep) { |
| struct list_head *e; |
| list_for_each(e, &ep->urb_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| if (urbl->req_id == req_id) { |
| urb = urbl->urb; |
| list_del_init(e); |
| break; |
| } |
| } |
| } |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| /* If urb is non-zero then we we must have an urb link to delete. |
| */ |
| if (urb) |
| oz_free_urb_link(urbl); |
| return urb; |
| } |
| |
| /* |
| * Pre-condition: Port lock must be held. |
| * Context: softirq |
| */ |
| static void oz_acquire_port(struct oz_port *port, void *hpd) |
| { |
| INIT_LIST_HEAD(&port->isoc_out_ep); |
| INIT_LIST_HEAD(&port->isoc_in_ep); |
| port->flags |= OZ_PORT_F_PRESENT | OZ_PORT_F_CHANGED; |
| port->status |= USB_PORT_STAT_CONNECTION | |
| (USB_PORT_STAT_C_CONNECTION << 16); |
| oz_usb_get(hpd); |
| port->hpd = hpd; |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static struct oz_hcd *oz_hcd_claim(void) |
| { |
| struct oz_hcd *ozhcd; |
| |
| spin_lock_bh(&g_hcdlock); |
| ozhcd = g_ozhcd; |
| if (ozhcd) |
| usb_get_hcd(ozhcd->hcd); |
| spin_unlock_bh(&g_hcdlock); |
| return ozhcd; |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static inline void oz_hcd_put(struct oz_hcd *ozhcd) |
| { |
| if (ozhcd) |
| usb_put_hcd(ozhcd->hcd); |
| } |
| |
| /* |
| * This is called by the protocol handler to notify that a PD has arrived. |
| * We allocate a port to associate with the PD and create a structure for |
| * endpoint 0. This port is made the connection port. |
| * In the event that one of the other port is already a connection port then |
| * we fail. |
| * TODO We should be able to do better than fail and should be able remember |
| * that this port needs configuring and make it the connection port once the |
| * current connection port has been assigned an address. Collisions here are |
| * probably very rare indeed. |
| * Context: softirq |
| */ |
| struct oz_port *oz_hcd_pd_arrived(void *hpd) |
| { |
| int i; |
| struct oz_port *hport; |
| struct oz_hcd *ozhcd; |
| struct oz_endpoint *ep; |
| |
| ozhcd = oz_hcd_claim(); |
| if (!ozhcd) |
| return NULL; |
| /* Allocate an endpoint object in advance (before holding hcd lock) to |
| * use for out endpoint 0. |
| */ |
| ep = oz_ep_alloc(0, GFP_ATOMIC); |
| if (!ep) |
| goto err_put; |
| |
| spin_lock_bh(&ozhcd->hcd_lock); |
| if (ozhcd->conn_port >= 0) |
| goto err_unlock; |
| |
| for (i = 0; i < OZ_NB_PORTS; i++) { |
| struct oz_port *port = &ozhcd->ports[i]; |
| |
| spin_lock(&port->port_lock); |
| if (!(port->flags & (OZ_PORT_F_PRESENT | OZ_PORT_F_CHANGED))) { |
| oz_acquire_port(port, hpd); |
| spin_unlock(&port->port_lock); |
| break; |
| } |
| spin_unlock(&port->port_lock); |
| } |
| if (i == OZ_NB_PORTS) |
| goto err_unlock; |
| |
| ozhcd->conn_port = i; |
| hport = &ozhcd->ports[i]; |
| hport->out_ep[0] = ep; |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| if (ozhcd->flags & OZ_HDC_F_SUSPENDED) |
| usb_hcd_resume_root_hub(ozhcd->hcd); |
| usb_hcd_poll_rh_status(ozhcd->hcd); |
| oz_hcd_put(ozhcd); |
| |
| return hport; |
| |
| err_unlock: |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| oz_ep_free(NULL, ep); |
| err_put: |
| oz_hcd_put(ozhcd); |
| return NULL; |
| } |
| |
| /* |
| * This is called by the protocol handler to notify that the PD has gone away. |
| * We need to deallocate all resources and then request that the root hub is |
| * polled. We release the reference we hold on the PD. |
| * Context: softirq |
| */ |
| void oz_hcd_pd_departed(struct oz_port *port) |
| { |
| struct oz_hcd *ozhcd; |
| void *hpd; |
| struct oz_endpoint *ep = NULL; |
| |
| if (port == NULL) { |
| oz_dbg(ON, "%s: port = 0\n", __func__); |
| return; |
| } |
| ozhcd = port->ozhcd; |
| if (ozhcd == NULL) |
| return; |
| /* Check if this is the connection port - if so clear it. |
| */ |
| spin_lock_bh(&ozhcd->hcd_lock); |
| if ((ozhcd->conn_port >= 0) && |
| (port == &ozhcd->ports[ozhcd->conn_port])) { |
| oz_dbg(ON, "Clearing conn_port\n"); |
| ozhcd->conn_port = -1; |
| } |
| spin_lock(&port->port_lock); |
| port->flags |= OZ_PORT_F_DYING; |
| spin_unlock(&port->port_lock); |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| |
| oz_clean_endpoints_for_config(ozhcd->hcd, port); |
| spin_lock_bh(&port->port_lock); |
| hpd = port->hpd; |
| port->hpd = NULL; |
| port->bus_addr = 0xff; |
| port->config_num = 0; |
| port->flags &= ~(OZ_PORT_F_PRESENT | OZ_PORT_F_DYING); |
| port->flags |= OZ_PORT_F_CHANGED; |
| port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE); |
| port->status |= (USB_PORT_STAT_C_CONNECTION << 16); |
| /* If there is an endpont 0 then clear the pointer while we hold |
| * the spinlock be we deallocate it after releasing the lock. |
| */ |
| if (port->out_ep[0]) { |
| ep = port->out_ep[0]; |
| port->out_ep[0] = NULL; |
| } |
| spin_unlock_bh(&port->port_lock); |
| if (ep) |
| oz_ep_free(port, ep); |
| usb_hcd_poll_rh_status(ozhcd->hcd); |
| oz_usb_put(hpd); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| void oz_hcd_pd_reset(void *hpd, void *hport) |
| { |
| /* Cleanup the current configuration and report reset to the core. |
| */ |
| struct oz_port *port = (struct oz_port *)hport; |
| struct oz_hcd *ozhcd = port->ozhcd; |
| |
| oz_dbg(ON, "PD Reset\n"); |
| spin_lock_bh(&port->port_lock); |
| port->flags |= OZ_PORT_F_CHANGED; |
| port->status |= USB_PORT_STAT_RESET; |
| port->status |= (USB_PORT_STAT_C_RESET << 16); |
| spin_unlock_bh(&port->port_lock); |
| oz_clean_endpoints_for_config(ozhcd->hcd, port); |
| usb_hcd_poll_rh_status(ozhcd->hcd); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| void oz_hcd_get_desc_cnf(void *hport, u8 req_id, int status, const u8 *desc, |
| int length, int offset, int total_size) |
| { |
| struct oz_port *port = (struct oz_port *)hport; |
| struct urb *urb; |
| int err = 0; |
| |
| oz_dbg(ON, "oz_hcd_get_desc_cnf length = %d offs = %d tot_size = %d\n", |
| length, offset, total_size); |
| urb = oz_find_urb_by_id(port, 0, req_id); |
| if (!urb) |
| return; |
| if (status == 0) { |
| int copy_len; |
| int required_size = urb->transfer_buffer_length; |
| if (required_size > total_size) |
| required_size = total_size; |
| copy_len = required_size-offset; |
| if (length <= copy_len) |
| copy_len = length; |
| memcpy(urb->transfer_buffer+offset, desc, copy_len); |
| offset += copy_len; |
| if (offset < required_size) { |
| struct usb_ctrlrequest *setup = |
| (struct usb_ctrlrequest *)urb->setup_packet; |
| unsigned wvalue = le16_to_cpu(setup->wValue); |
| if (oz_enqueue_ep_urb(port, 0, 0, urb, req_id)) |
| err = -ENOMEM; |
| else if (oz_usb_get_desc_req(port->hpd, req_id, |
| setup->bRequestType, (u8)(wvalue>>8), |
| (u8)wvalue, setup->wIndex, offset, |
| required_size-offset)) { |
| oz_dequeue_ep_urb(port, 0, 0, urb); |
| err = -ENOMEM; |
| } |
| if (err == 0) |
| return; |
| } |
| } |
| urb->actual_length = total_size; |
| oz_complete_urb(port->ozhcd->hcd, urb, 0); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static void oz_display_conf_type(u8 t) |
| { |
| switch (t) { |
| case USB_REQ_GET_STATUS: |
| oz_dbg(ON, "USB_REQ_GET_STATUS - cnf\n"); |
| break; |
| case USB_REQ_CLEAR_FEATURE: |
| oz_dbg(ON, "USB_REQ_CLEAR_FEATURE - cnf\n"); |
| break; |
| case USB_REQ_SET_FEATURE: |
| oz_dbg(ON, "USB_REQ_SET_FEATURE - cnf\n"); |
| break; |
| case USB_REQ_SET_ADDRESS: |
| oz_dbg(ON, "USB_REQ_SET_ADDRESS - cnf\n"); |
| break; |
| case USB_REQ_GET_DESCRIPTOR: |
| oz_dbg(ON, "USB_REQ_GET_DESCRIPTOR - cnf\n"); |
| break; |
| case USB_REQ_SET_DESCRIPTOR: |
| oz_dbg(ON, "USB_REQ_SET_DESCRIPTOR - cnf\n"); |
| break; |
| case USB_REQ_GET_CONFIGURATION: |
| oz_dbg(ON, "USB_REQ_GET_CONFIGURATION - cnf\n"); |
| break; |
| case USB_REQ_SET_CONFIGURATION: |
| oz_dbg(ON, "USB_REQ_SET_CONFIGURATION - cnf\n"); |
| break; |
| case USB_REQ_GET_INTERFACE: |
| oz_dbg(ON, "USB_REQ_GET_INTERFACE - cnf\n"); |
| break; |
| case USB_REQ_SET_INTERFACE: |
| oz_dbg(ON, "USB_REQ_SET_INTERFACE - cnf\n"); |
| break; |
| case USB_REQ_SYNCH_FRAME: |
| oz_dbg(ON, "USB_REQ_SYNCH_FRAME - cnf\n"); |
| break; |
| } |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static void oz_hcd_complete_set_config(struct oz_port *port, struct urb *urb, |
| u8 rcode, u8 config_num) |
| { |
| int rc = 0; |
| struct usb_hcd *hcd = port->ozhcd->hcd; |
| |
| if (rcode == 0) { |
| port->config_num = config_num; |
| oz_clean_endpoints_for_config(hcd, port); |
| if (oz_build_endpoints_for_config(hcd, port, |
| &urb->dev->config[port->config_num-1], GFP_ATOMIC)) { |
| rc = -ENOMEM; |
| } |
| } else { |
| rc = -ENOMEM; |
| } |
| oz_complete_urb(hcd, urb, rc); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static void oz_hcd_complete_set_interface(struct oz_port *port, struct urb *urb, |
| u8 rcode, u8 if_num, u8 alt) |
| { |
| struct usb_hcd *hcd = port->ozhcd->hcd; |
| int rc = 0; |
| |
| if ((rcode == 0) && (port->config_num > 0)) { |
| struct usb_host_config *config; |
| struct usb_host_interface *intf; |
| oz_dbg(ON, "Set interface %d alt %d\n", if_num, alt); |
| oz_clean_endpoints_for_interface(hcd, port, if_num); |
| config = &urb->dev->config[port->config_num-1]; |
| intf = &config->intf_cache[if_num]->altsetting[alt]; |
| if (oz_build_endpoints_for_interface(hcd, port, intf, |
| GFP_ATOMIC)) |
| rc = -ENOMEM; |
| else |
| port->iface[if_num].alt = alt; |
| } else { |
| rc = -ENOMEM; |
| } |
| oz_complete_urb(hcd, urb, rc); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| void oz_hcd_control_cnf(void *hport, u8 req_id, u8 rcode, const u8 *data, |
| int data_len) |
| { |
| struct oz_port *port = (struct oz_port *)hport; |
| struct urb *urb; |
| struct usb_ctrlrequest *setup; |
| struct usb_hcd *hcd = port->ozhcd->hcd; |
| unsigned windex; |
| unsigned wvalue; |
| |
| oz_dbg(ON, "oz_hcd_control_cnf rcode=%u len=%d\n", rcode, data_len); |
| urb = oz_find_urb_by_id(port, 0, req_id); |
| if (!urb) { |
| oz_dbg(ON, "URB not found\n"); |
| return; |
| } |
| setup = (struct usb_ctrlrequest *)urb->setup_packet; |
| windex = le16_to_cpu(setup->wIndex); |
| wvalue = le16_to_cpu(setup->wValue); |
| if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { |
| /* Standard requests */ |
| oz_display_conf_type(setup->bRequest); |
| switch (setup->bRequest) { |
| case USB_REQ_SET_CONFIGURATION: |
| oz_hcd_complete_set_config(port, urb, rcode, |
| (u8)wvalue); |
| break; |
| case USB_REQ_SET_INTERFACE: |
| oz_hcd_complete_set_interface(port, urb, rcode, |
| (u8)windex, (u8)wvalue); |
| break; |
| default: |
| oz_complete_urb(hcd, urb, 0); |
| } |
| |
| } else { |
| int copy_len; |
| oz_dbg(ON, "VENDOR-CLASS - cnf\n"); |
| if (data_len) { |
| if (data_len <= urb->transfer_buffer_length) |
| copy_len = data_len; |
| else |
| copy_len = urb->transfer_buffer_length; |
| memcpy(urb->transfer_buffer, data, copy_len); |
| urb->actual_length = copy_len; |
| } |
| oz_complete_urb(hcd, urb, 0); |
| } |
| } |
| |
| /* |
| * Context: softirq-serialized |
| */ |
| static int oz_hcd_buffer_data(struct oz_endpoint *ep, const u8 *data, |
| int data_len) |
| { |
| int space; |
| int copy_len; |
| |
| if (!ep->buffer) |
| return -1; |
| space = ep->out_ix-ep->in_ix-1; |
| if (space < 0) |
| space += ep->buffer_size; |
| if (space < (data_len+1)) { |
| oz_dbg(ON, "Buffer full\n"); |
| return -1; |
| } |
| ep->buffer[ep->in_ix] = (u8)data_len; |
| if (++ep->in_ix == ep->buffer_size) |
| ep->in_ix = 0; |
| copy_len = ep->buffer_size - ep->in_ix; |
| if (copy_len > data_len) |
| copy_len = data_len; |
| memcpy(&ep->buffer[ep->in_ix], data, copy_len); |
| |
| if (copy_len < data_len) { |
| memcpy(ep->buffer, data+copy_len, data_len-copy_len); |
| ep->in_ix = data_len-copy_len; |
| } else { |
| ep->in_ix += copy_len; |
| } |
| if (ep->in_ix == ep->buffer_size) |
| ep->in_ix = 0; |
| ep->buffered_units++; |
| return 0; |
| } |
| |
| /* |
| * Context: softirq-serialized |
| */ |
| void oz_hcd_data_ind(void *hport, u8 endpoint, const u8 *data, int data_len) |
| { |
| struct oz_port *port = (struct oz_port *)hport; |
| struct oz_endpoint *ep; |
| struct oz_hcd *ozhcd = port->ozhcd; |
| |
| spin_lock_bh(&ozhcd->hcd_lock); |
| ep = port->in_ep[endpoint & USB_ENDPOINT_NUMBER_MASK]; |
| if (ep == NULL) |
| goto done; |
| switch (ep->attrib & USB_ENDPOINT_XFERTYPE_MASK) { |
| case USB_ENDPOINT_XFER_INT: |
| case USB_ENDPOINT_XFER_BULK: |
| if (!list_empty(&ep->urb_list)) { |
| struct oz_urb_link *urbl = |
| list_first_entry(&ep->urb_list, |
| struct oz_urb_link, link); |
| struct urb *urb; |
| int copy_len; |
| list_del_init(&urbl->link); |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| urb = urbl->urb; |
| oz_free_urb_link(urbl); |
| if (data_len <= urb->transfer_buffer_length) |
| copy_len = data_len; |
| else |
| copy_len = urb->transfer_buffer_length; |
| memcpy(urb->transfer_buffer, data, copy_len); |
| urb->actual_length = copy_len; |
| oz_complete_urb(port->ozhcd->hcd, urb, 0); |
| return; |
| } else { |
| oz_dbg(ON, "buffering frame as URB is not available\n"); |
| oz_hcd_buffer_data(ep, data, data_len); |
| } |
| break; |
| case USB_ENDPOINT_XFER_ISOC: |
| oz_hcd_buffer_data(ep, data, data_len); |
| break; |
| } |
| done: |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static inline int oz_usb_get_frame_number(void) |
| { |
| return atomic_inc_return(&g_usb_frame_number); |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| int oz_hcd_heartbeat(void *hport) |
| { |
| int rc = 0; |
| struct oz_port *port = (struct oz_port *)hport; |
| struct oz_hcd *ozhcd = port->ozhcd; |
| struct oz_urb_link *urbl; |
| struct list_head xfr_list; |
| struct list_head *e; |
| struct list_head *n; |
| struct urb *urb; |
| struct oz_endpoint *ep; |
| struct timespec ts, delta; |
| |
| getrawmonotonic(&ts); |
| INIT_LIST_HEAD(&xfr_list); |
| /* Check the OUT isoc endpoints to see if any URB data can be sent. |
| */ |
| spin_lock_bh(&ozhcd->hcd_lock); |
| list_for_each(e, &port->isoc_out_ep) { |
| ep = ep_from_link(e); |
| if (ep->credit < 0) |
| continue; |
| delta = timespec_sub(ts, ep->timestamp); |
| ep->credit += div_u64(timespec_to_ns(&delta), NSEC_PER_MSEC); |
| if (ep->credit > ep->credit_ceiling) |
| ep->credit = ep->credit_ceiling; |
| ep->timestamp = ts; |
| while (ep->credit && !list_empty(&ep->urb_list)) { |
| urbl = list_first_entry(&ep->urb_list, |
| struct oz_urb_link, link); |
| urb = urbl->urb; |
| if ((ep->credit + 1) < urb->number_of_packets) |
| break; |
| ep->credit -= urb->number_of_packets; |
| if (ep->credit < 0) |
| ep->credit = 0; |
| list_move_tail(&urbl->link, &xfr_list); |
| } |
| } |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| /* Send to PD and complete URBs. |
| */ |
| list_for_each_safe(e, n, &xfr_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| urb = urbl->urb; |
| list_del_init(e); |
| urb->error_count = 0; |
| urb->start_frame = oz_usb_get_frame_number(); |
| oz_usb_send_isoc(port->hpd, urbl->ep_num, urb); |
| oz_free_urb_link(urbl); |
| oz_complete_urb(port->ozhcd->hcd, urb, 0); |
| } |
| /* Check the IN isoc endpoints to see if any URBs can be completed. |
| */ |
| spin_lock_bh(&ozhcd->hcd_lock); |
| list_for_each(e, &port->isoc_in_ep) { |
| struct oz_endpoint *ep = ep_from_link(e); |
| if (ep->flags & OZ_F_EP_BUFFERING) { |
| if (ep->buffered_units >= OZ_IN_BUFFERING_UNITS) { |
| ep->flags &= ~OZ_F_EP_BUFFERING; |
| ep->credit = 0; |
| ep->timestamp = ts; |
| ep->start_frame = 0; |
| } |
| continue; |
| } |
| delta = timespec_sub(ts, ep->timestamp); |
| ep->credit += div_u64(timespec_to_ns(&delta), NSEC_PER_MSEC); |
| ep->timestamp = ts; |
| while (!list_empty(&ep->urb_list)) { |
| struct oz_urb_link *urbl = |
| list_first_entry(&ep->urb_list, |
| struct oz_urb_link, link); |
| struct urb *urb = urbl->urb; |
| int len = 0; |
| int copy_len; |
| int i; |
| if (ep->credit < urb->number_of_packets) |
| break; |
| if (ep->buffered_units < urb->number_of_packets) |
| break; |
| urb->actual_length = 0; |
| for (i = 0; i < urb->number_of_packets; i++) { |
| len = ep->buffer[ep->out_ix]; |
| if (++ep->out_ix == ep->buffer_size) |
| ep->out_ix = 0; |
| copy_len = ep->buffer_size - ep->out_ix; |
| if (copy_len > len) |
| copy_len = len; |
| memcpy(urb->transfer_buffer, |
| &ep->buffer[ep->out_ix], copy_len); |
| if (copy_len < len) { |
| memcpy(urb->transfer_buffer+copy_len, |
| ep->buffer, len-copy_len); |
| ep->out_ix = len-copy_len; |
| } else |
| ep->out_ix += copy_len; |
| if (ep->out_ix == ep->buffer_size) |
| ep->out_ix = 0; |
| urb->iso_frame_desc[i].offset = |
| urb->actual_length; |
| urb->actual_length += len; |
| urb->iso_frame_desc[i].actual_length = len; |
| urb->iso_frame_desc[i].status = 0; |
| } |
| ep->buffered_units -= urb->number_of_packets; |
| urb->error_count = 0; |
| urb->start_frame = ep->start_frame; |
| ep->start_frame += urb->number_of_packets; |
| list_move_tail(&urbl->link, &xfr_list); |
| ep->credit -= urb->number_of_packets; |
| } |
| } |
| if (!list_empty(&port->isoc_out_ep) || !list_empty(&port->isoc_in_ep)) |
| rc = 1; |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| /* Complete the filled URBs. |
| */ |
| list_for_each_safe(e, n, &xfr_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| urb = urbl->urb; |
| list_del_init(e); |
| oz_free_urb_link(urbl); |
| oz_complete_urb(port->ozhcd->hcd, urb, 0); |
| } |
| /* Check if there are any ep0 requests that have timed out. |
| * If so resent to PD. |
| */ |
| ep = port->out_ep[0]; |
| if (ep) { |
| struct list_head *e; |
| struct list_head *n; |
| spin_lock_bh(&ozhcd->hcd_lock); |
| list_for_each_safe(e, n, &ep->urb_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| if (urbl->submit_counter > EP0_TIMEOUT_COUNTER) { |
| oz_dbg(ON, "Request 0x%p timeout\n", urbl->urb); |
| list_move_tail(e, &xfr_list); |
| urbl->submit_counter = 0; |
| } else { |
| urbl->submit_counter++; |
| } |
| } |
| if (!list_empty(&ep->urb_list)) |
| rc = 1; |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| e = xfr_list.next; |
| while (e != &xfr_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| e = e->next; |
| oz_dbg(ON, "Resending request to PD\n"); |
| oz_process_ep0_urb(ozhcd, urbl->urb, GFP_ATOMIC); |
| oz_free_urb_link(urbl); |
| } |
| } |
| return rc; |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static int oz_build_endpoints_for_interface(struct usb_hcd *hcd, |
| struct oz_port *port, |
| struct usb_host_interface *intf, gfp_t mem_flags) |
| { |
| struct oz_hcd *ozhcd = port->ozhcd; |
| int i; |
| int if_ix = intf->desc.bInterfaceNumber; |
| int request_heartbeat = 0; |
| |
| oz_dbg(ON, "interface[%d] = %p\n", if_ix, intf); |
| if (if_ix >= port->num_iface || port->iface == NULL) |
| return -ENOMEM; |
| for (i = 0; i < intf->desc.bNumEndpoints; i++) { |
| struct usb_host_endpoint *hep = &intf->endpoint[i]; |
| u8 ep_addr = hep->desc.bEndpointAddress; |
| u8 ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; |
| struct oz_endpoint *ep; |
| int buffer_size = 0; |
| |
| oz_dbg(ON, "%d bEndpointAddress = %x\n", i, ep_addr); |
| if (ep_addr & USB_ENDPOINT_DIR_MASK) { |
| switch (hep->desc.bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) { |
| case USB_ENDPOINT_XFER_ISOC: |
| buffer_size = OZ_EP_BUFFER_SIZE_ISOC; |
| break; |
| case USB_ENDPOINT_XFER_INT: |
| buffer_size = OZ_EP_BUFFER_SIZE_INT; |
| break; |
| } |
| } |
| |
| ep = oz_ep_alloc(buffer_size, mem_flags); |
| if (!ep) { |
| oz_clean_endpoints_for_interface(hcd, port, if_ix); |
| return -ENOMEM; |
| } |
| ep->attrib = hep->desc.bmAttributes; |
| ep->ep_num = ep_num; |
| if ((ep->attrib & USB_ENDPOINT_XFERTYPE_MASK) |
| == USB_ENDPOINT_XFER_ISOC) { |
| oz_dbg(ON, "wMaxPacketSize = %d\n", |
| usb_endpoint_maxp(&hep->desc)); |
| ep->credit_ceiling = 200; |
| if (ep_addr & USB_ENDPOINT_DIR_MASK) { |
| ep->flags |= OZ_F_EP_BUFFERING; |
| } else { |
| ep->flags |= OZ_F_EP_HAVE_STREAM; |
| if (oz_usb_stream_create(port->hpd, ep_num)) |
| ep->flags &= ~OZ_F_EP_HAVE_STREAM; |
| } |
| } |
| spin_lock_bh(&ozhcd->hcd_lock); |
| if (ep_addr & USB_ENDPOINT_DIR_MASK) { |
| port->in_ep[ep_num] = ep; |
| port->iface[if_ix].ep_mask |= |
| (1<<(ep_num+OZ_NB_ENDPOINTS)); |
| if ((ep->attrib & USB_ENDPOINT_XFERTYPE_MASK) |
| == USB_ENDPOINT_XFER_ISOC) { |
| list_add_tail(&ep->link, &port->isoc_in_ep); |
| request_heartbeat = 1; |
| } |
| } else { |
| port->out_ep[ep_num] = ep; |
| port->iface[if_ix].ep_mask |= (1<<ep_num); |
| if ((ep->attrib & USB_ENDPOINT_XFERTYPE_MASK) |
| == USB_ENDPOINT_XFER_ISOC) { |
| list_add_tail(&ep->link, &port->isoc_out_ep); |
| request_heartbeat = 1; |
| } |
| } |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| if (request_heartbeat && port->hpd) |
| oz_usb_request_heartbeat(port->hpd); |
| } |
| return 0; |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static void oz_clean_endpoints_for_interface(struct usb_hcd *hcd, |
| struct oz_port *port, int if_ix) |
| { |
| struct oz_hcd *ozhcd = port->ozhcd; |
| unsigned mask; |
| int i; |
| struct list_head ep_list; |
| |
| oz_dbg(ON, "Deleting endpoints for interface %d\n", if_ix); |
| if (if_ix >= port->num_iface) |
| return; |
| INIT_LIST_HEAD(&ep_list); |
| spin_lock_bh(&ozhcd->hcd_lock); |
| mask = port->iface[if_ix].ep_mask; |
| port->iface[if_ix].ep_mask = 0; |
| for (i = 0; i < OZ_NB_ENDPOINTS; i++) { |
| struct list_head *e; |
| /* Gather OUT endpoints. |
| */ |
| if ((mask & (1<<i)) && port->out_ep[i]) { |
| e = &port->out_ep[i]->link; |
| port->out_ep[i] = NULL; |
| /* Remove from isoc list if present. |
| */ |
| list_move_tail(e, &ep_list); |
| } |
| /* Gather IN endpoints. |
| */ |
| if ((mask & (1<<(i+OZ_NB_ENDPOINTS))) && port->in_ep[i]) { |
| e = &port->in_ep[i]->link; |
| port->in_ep[i] = NULL; |
| list_move_tail(e, &ep_list); |
| } |
| } |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| while (!list_empty(&ep_list)) { |
| struct oz_endpoint *ep = |
| list_first_entry(&ep_list, struct oz_endpoint, link); |
| list_del_init(&ep->link); |
| oz_ep_free(port, ep); |
| } |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static int oz_build_endpoints_for_config(struct usb_hcd *hcd, |
| struct oz_port *port, struct usb_host_config *config, |
| gfp_t mem_flags) |
| { |
| struct oz_hcd *ozhcd = port->ozhcd; |
| int i; |
| int num_iface = config->desc.bNumInterfaces; |
| |
| if (num_iface) { |
| struct oz_interface *iface; |
| |
| iface = kmalloc(num_iface*sizeof(struct oz_interface), |
| mem_flags | __GFP_ZERO); |
| if (!iface) |
| return -ENOMEM; |
| spin_lock_bh(&ozhcd->hcd_lock); |
| port->iface = iface; |
| port->num_iface = num_iface; |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| } |
| for (i = 0; i < num_iface; i++) { |
| struct usb_host_interface *intf = |
| &config->intf_cache[i]->altsetting[0]; |
| if (oz_build_endpoints_for_interface(hcd, port, intf, |
| mem_flags)) |
| goto fail; |
| } |
| return 0; |
| fail: |
| oz_clean_endpoints_for_config(hcd, port); |
| return -1; |
| } |
| |
| /* |
| * Context: softirq |
| */ |
| static void oz_clean_endpoints_for_config(struct usb_hcd *hcd, |
| struct oz_port *port) |
| { |
| struct oz_hcd *ozhcd = port->ozhcd; |
| int i; |
| |
| oz_dbg(ON, "Deleting endpoints for configuration\n"); |
| for (i = 0; i < port->num_iface; i++) |
| oz_clean_endpoints_for_interface(hcd, port, i); |
| spin_lock_bh(&ozhcd->hcd_lock); |
| if (port->iface) { |
| oz_dbg(ON, "Freeing interfaces object\n"); |
| kfree(port->iface); |
| port->iface = NULL; |
| } |
| port->num_iface = 0; |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| } |
| |
| /* |
| * Context: tasklet |
| */ |
| static void *oz_claim_hpd(struct oz_port *port) |
| { |
| void *hpd; |
| struct oz_hcd *ozhcd = port->ozhcd; |
| |
| spin_lock_bh(&ozhcd->hcd_lock); |
| hpd = port->hpd; |
| if (hpd) |
| oz_usb_get(hpd); |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| return hpd; |
| } |
| |
| /* |
| * Context: tasklet |
| */ |
| static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb, |
| gfp_t mem_flags) |
| { |
| struct usb_ctrlrequest *setup; |
| unsigned windex; |
| unsigned wvalue; |
| unsigned wlength; |
| void *hpd; |
| u8 req_id; |
| int rc = 0; |
| unsigned complete = 0; |
| |
| int port_ix = -1; |
| struct oz_port *port = NULL; |
| |
| oz_dbg(URB, "[%s]:(%p)\n", __func__, urb); |
| port_ix = oz_get_port_from_addr(ozhcd, urb->dev->devnum); |
| if (port_ix < 0) { |
| rc = -EPIPE; |
| goto out; |
| } |
| port = &ozhcd->ports[port_ix]; |
| if (((port->flags & OZ_PORT_F_PRESENT) == 0) |
| || (port->flags & OZ_PORT_F_DYING)) { |
| oz_dbg(ON, "Refusing URB port_ix = %d devnum = %d\n", |
| port_ix, urb->dev->devnum); |
| rc = -EPIPE; |
| goto out; |
| } |
| /* Store port in private context data. |
| */ |
| urb->hcpriv = port; |
| setup = (struct usb_ctrlrequest *)urb->setup_packet; |
| windex = le16_to_cpu(setup->wIndex); |
| wvalue = le16_to_cpu(setup->wValue); |
| wlength = le16_to_cpu(setup->wLength); |
| oz_dbg(CTRL_DETAIL, "bRequestType = %x\n", setup->bRequestType); |
| oz_dbg(CTRL_DETAIL, "bRequest = %x\n", setup->bRequest); |
| oz_dbg(CTRL_DETAIL, "wValue = %x\n", wvalue); |
| oz_dbg(CTRL_DETAIL, "wIndex = %x\n", windex); |
| oz_dbg(CTRL_DETAIL, "wLength = %x\n", wlength); |
| |
| req_id = port->next_req_id++; |
| hpd = oz_claim_hpd(port); |
| if (hpd == NULL) { |
| oz_dbg(ON, "Cannot claim port\n"); |
| rc = -EPIPE; |
| goto out; |
| } |
| |
| if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { |
| /* Standard requests |
| */ |
| switch (setup->bRequest) { |
| case USB_REQ_GET_DESCRIPTOR: |
| oz_dbg(ON, "USB_REQ_GET_DESCRIPTOR - req\n"); |
| break; |
| case USB_REQ_SET_ADDRESS: |
| oz_dbg(ON, "USB_REQ_SET_ADDRESS - req\n"); |
| oz_dbg(ON, "Port %d address is 0x%x\n", |
| ozhcd->conn_port, |
| (u8)le16_to_cpu(setup->wValue)); |
| spin_lock_bh(&ozhcd->hcd_lock); |
| if (ozhcd->conn_port >= 0) { |
| ozhcd->ports[ozhcd->conn_port].bus_addr = |
| (u8)le16_to_cpu(setup->wValue); |
| oz_dbg(ON, "Clearing conn_port\n"); |
| ozhcd->conn_port = -1; |
| } |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| complete = 1; |
| break; |
| case USB_REQ_SET_CONFIGURATION: |
| oz_dbg(ON, "USB_REQ_SET_CONFIGURATION - req\n"); |
| break; |
| case USB_REQ_GET_CONFIGURATION: |
| /* We short circuit this case and reply directly since |
| * we have the selected configuration number cached. |
| */ |
| oz_dbg(ON, "USB_REQ_GET_CONFIGURATION - reply now\n"); |
| if (urb->transfer_buffer_length >= 1) { |
| urb->actual_length = 1; |
| *((u8 *)urb->transfer_buffer) = |
| port->config_num; |
| complete = 1; |
| } else { |
| rc = -EPIPE; |
| } |
| break; |
| case USB_REQ_GET_INTERFACE: |
| /* We short circuit this case and reply directly since |
| * we have the selected interface alternative cached. |
| */ |
| oz_dbg(ON, "USB_REQ_GET_INTERFACE - reply now\n"); |
| if (urb->transfer_buffer_length >= 1) { |
| urb->actual_length = 1; |
| *((u8 *)urb->transfer_buffer) = |
| port->iface[(u8)windex].alt; |
| oz_dbg(ON, "interface = %d alt = %d\n", |
| windex, port->iface[(u8)windex].alt); |
| complete = 1; |
| } else { |
| rc = -EPIPE; |
| } |
| break; |
| case USB_REQ_SET_INTERFACE: |
| oz_dbg(ON, "USB_REQ_SET_INTERFACE - req\n"); |
| break; |
| } |
| } |
| if (!rc && !complete) { |
| int data_len = 0; |
| if ((setup->bRequestType & USB_DIR_IN) == 0) |
| data_len = wlength; |
| urb->actual_length = data_len; |
| if (oz_usb_control_req(port->hpd, req_id, setup, |
| urb->transfer_buffer, data_len)) { |
| rc = -ENOMEM; |
| } else { |
| /* Note: we are queuing the request after we have |
| * submitted it to be transmitted. If the request were |
| * to complete before we queued it then it would not |
| * be found in the queue. It seems impossible for |
| * this to happen but if it did the request would |
| * be resubmitted so the problem would hopefully |
| * resolve itself. Putting the request into the |
| * queue before it has been sent is worse since the |
| * urb could be cancelled while we are using it |
| * to build the request. |
| */ |
| if (oz_enqueue_ep_urb(port, 0, 0, urb, req_id)) |
| rc = -ENOMEM; |
| } |
| } |
| oz_usb_put(hpd); |
| out: |
| if (rc || complete) { |
| oz_dbg(ON, "Completing request locally\n"); |
| oz_complete_urb(ozhcd->hcd, urb, rc); |
| } else { |
| oz_usb_request_heartbeat(port->hpd); |
| } |
| } |
| |
| /* |
| * Context: tasklet |
| */ |
| static int oz_urb_process(struct oz_hcd *ozhcd, struct urb *urb) |
| { |
| int rc = 0; |
| struct oz_port *port = urb->hcpriv; |
| u8 ep_addr; |
| |
| /* When we are paranoid we keep a list of urbs which we check against |
| * before handing one back. This is just for debugging during |
| * development and should be turned off in the released driver. |
| */ |
| oz_remember_urb(urb); |
| /* Check buffer is valid. |
| */ |
| if (!urb->transfer_buffer && urb->transfer_buffer_length) |
| return -EINVAL; |
| /* Check if there is a device at the port - refuse if not. |
| */ |
| if ((port->flags & OZ_PORT_F_PRESENT) == 0) |
| return -EPIPE; |
| ep_addr = usb_pipeendpoint(urb->pipe); |
| if (ep_addr) { |
| /* If the request is not for EP0 then queue it. |
| */ |
| if (oz_enqueue_ep_urb(port, ep_addr, usb_pipein(urb->pipe), |
| urb, 0)) |
| rc = -EPIPE; |
| } else { |
| oz_process_ep0_urb(ozhcd, urb, GFP_ATOMIC); |
| } |
| return rc; |
| } |
| |
| /* |
| * Context: tasklet |
| */ |
| static void oz_urb_process_tasklet(unsigned long unused) |
| { |
| unsigned long irq_state; |
| struct urb *urb; |
| struct oz_hcd *ozhcd = oz_hcd_claim(); |
| int rc = 0; |
| |
| if (ozhcd == NULL) |
| return; |
| /* This is called from a tasklet so is in softirq context but the urb |
| * list is filled from any context so we need to lock |
| * appropriately while removing urbs. |
| */ |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| while (!list_empty(&ozhcd->urb_pending_list)) { |
| struct oz_urb_link *urbl = |
| list_first_entry(&ozhcd->urb_pending_list, |
| struct oz_urb_link, link); |
| list_del_init(&urbl->link); |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| urb = urbl->urb; |
| oz_free_urb_link(urbl); |
| rc = oz_urb_process(ozhcd, urb); |
| if (rc) |
| oz_complete_urb(ozhcd->hcd, urb, rc); |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| } |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| oz_hcd_put(ozhcd); |
| } |
| |
| /* |
| * This function searches for the urb in any of the lists it could be in. |
| * If it is found it is removed from the list and completed. If the urb is |
| * being processed then it won't be in a list so won't be found. However, the |
| * call to usb_hcd_check_unlink_urb() will set the value of the unlinked field |
| * to a non-zero value. When an attempt is made to put the urb back in a list |
| * the unlinked field will be checked and the urb will then be completed. |
| * Context: tasklet |
| */ |
| static void oz_urb_cancel(struct oz_port *port, u8 ep_num, struct urb *urb) |
| { |
| struct oz_urb_link *urbl = NULL; |
| struct list_head *e; |
| struct oz_hcd *ozhcd; |
| unsigned long irq_state; |
| u8 ix; |
| |
| if (port == NULL) { |
| oz_dbg(ON, "%s: ERROR: (%p) port is null\n", __func__, urb); |
| return; |
| } |
| ozhcd = port->ozhcd; |
| if (ozhcd == NULL) { |
| oz_dbg(ON, "%s; ERROR: (%p) ozhcd is null\n", __func__, urb); |
| return; |
| } |
| |
| /* Look in the tasklet queue. |
| */ |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| list_for_each(e, &ozhcd->urb_cancel_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| if (urb == urbl->urb) { |
| list_del_init(e); |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| goto out2; |
| } |
| } |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| urbl = NULL; |
| |
| /* Look in the orphanage. |
| */ |
| spin_lock_irqsave(&ozhcd->hcd_lock, irq_state); |
| list_for_each(e, &ozhcd->orphanage) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| if (urbl->urb == urb) { |
| list_del(e); |
| oz_dbg(ON, "Found urb in orphanage\n"); |
| goto out; |
| } |
| } |
| ix = (ep_num & 0xf); |
| urbl = NULL; |
| if ((ep_num & USB_DIR_IN) && ix) |
| urbl = oz_remove_urb(port->in_ep[ix], urb); |
| else |
| urbl = oz_remove_urb(port->out_ep[ix], urb); |
| out: |
| spin_unlock_irqrestore(&ozhcd->hcd_lock, irq_state); |
| out2: |
| if (urbl) { |
| urb->actual_length = 0; |
| oz_free_urb_link(urbl); |
| oz_complete_urb(ozhcd->hcd, urb, -EPIPE); |
| } |
| } |
| |
| /* |
| * Context: tasklet |
| */ |
| static void oz_urb_cancel_tasklet(unsigned long unused) |
| { |
| unsigned long irq_state; |
| struct urb *urb; |
| struct oz_hcd *ozhcd = oz_hcd_claim(); |
| |
| if (ozhcd == NULL) |
| return; |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| while (!list_empty(&ozhcd->urb_cancel_list)) { |
| struct oz_urb_link *urbl = |
| list_first_entry(&ozhcd->urb_cancel_list, |
| struct oz_urb_link, link); |
| list_del_init(&urbl->link); |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| urb = urbl->urb; |
| if (urb->unlinked) |
| oz_urb_cancel(urbl->port, urbl->ep_num, urb); |
| oz_free_urb_link(urbl); |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| } |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| oz_hcd_put(ozhcd); |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static void oz_hcd_clear_orphanage(struct oz_hcd *ozhcd, int status) |
| { |
| if (ozhcd) { |
| struct oz_urb_link *urbl; |
| while (!list_empty(&ozhcd->orphanage)) { |
| urbl = list_first_entry(&ozhcd->orphanage, |
| struct oz_urb_link, link); |
| list_del(&urbl->link); |
| oz_complete_urb(ozhcd->hcd, urbl->urb, status); |
| oz_free_urb_link(urbl); |
| } |
| } |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static int oz_hcd_start(struct usb_hcd *hcd) |
| { |
| hcd->power_budget = 200; |
| hcd->state = HC_STATE_RUNNING; |
| hcd->uses_new_polling = 1; |
| return 0; |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static void oz_hcd_stop(struct usb_hcd *hcd) |
| { |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static void oz_hcd_shutdown(struct usb_hcd *hcd) |
| { |
| } |
| |
| /* |
| * Called to queue an urb for the device. |
| * This function should return a non-zero error code if it fails the urb but |
| * should not call usb_hcd_giveback_urb(). |
| * Context: any |
| */ |
| static int oz_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, |
| gfp_t mem_flags) |
| { |
| struct oz_hcd *ozhcd = oz_hcd_private(hcd); |
| int rc; |
| int port_ix; |
| struct oz_port *port; |
| unsigned long irq_state; |
| struct oz_urb_link *urbl; |
| |
| oz_dbg(URB, "%s: (%p)\n", __func__, urb); |
| if (unlikely(ozhcd == NULL)) { |
| oz_dbg(URB, "Refused urb(%p) not ozhcd\n", urb); |
| return -EPIPE; |
| } |
| if (unlikely(hcd->state != HC_STATE_RUNNING)) { |
| oz_dbg(URB, "Refused urb(%p) not running\n", urb); |
| return -EPIPE; |
| } |
| port_ix = oz_get_port_from_addr(ozhcd, urb->dev->devnum); |
| if (port_ix < 0) |
| return -EPIPE; |
| port = &ozhcd->ports[port_ix]; |
| if (port == NULL) |
| return -EPIPE; |
| if (!(port->flags & OZ_PORT_F_PRESENT) || |
| (port->flags & OZ_PORT_F_CHANGED)) { |
| oz_dbg(ON, "Refusing URB port_ix = %d devnum = %d\n", |
| port_ix, urb->dev->devnum); |
| return -EPIPE; |
| } |
| urb->hcpriv = port; |
| /* Put request in queue for processing by tasklet. |
| */ |
| urbl = oz_alloc_urb_link(); |
| if (unlikely(urbl == NULL)) |
| return -ENOMEM; |
| urbl->urb = urb; |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| rc = usb_hcd_link_urb_to_ep(hcd, urb); |
| if (unlikely(rc)) { |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| oz_free_urb_link(urbl); |
| return rc; |
| } |
| list_add_tail(&urbl->link, &ozhcd->urb_pending_list); |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| tasklet_schedule(&g_urb_process_tasklet); |
| atomic_inc(&g_pending_urbs); |
| return 0; |
| } |
| |
| /* |
| * Context: tasklet |
| */ |
| static struct oz_urb_link *oz_remove_urb(struct oz_endpoint *ep, |
| struct urb *urb) |
| { |
| struct oz_urb_link *urbl; |
| struct list_head *e; |
| |
| if (unlikely(ep == NULL)) |
| return NULL; |
| list_for_each(e, &ep->urb_list) { |
| urbl = container_of(e, struct oz_urb_link, link); |
| if (urbl->urb == urb) { |
| list_del_init(e); |
| if (usb_pipeisoc(urb->pipe)) { |
| ep->credit -= urb->number_of_packets; |
| if (ep->credit < 0) |
| ep->credit = 0; |
| } |
| return urbl; |
| } |
| } |
| return NULL; |
| } |
| |
| /* |
| * Called to dequeue a previously submitted urb for the device. |
| * Context: any |
| */ |
| static int oz_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) |
| { |
| struct oz_hcd *ozhcd = oz_hcd_private(hcd); |
| struct oz_urb_link *urbl; |
| int rc; |
| unsigned long irq_state; |
| |
| oz_dbg(URB, "%s: (%p)\n", __func__, urb); |
| urbl = oz_alloc_urb_link(); |
| if (unlikely(urbl == NULL)) |
| return -ENOMEM; |
| spin_lock_irqsave(&g_tasklet_lock, irq_state); |
| /* The following function checks the urb is still in the queue |
| * maintained by the core and that the unlinked field is zero. |
| * If both are true the function sets the unlinked field and returns |
| * zero. Otherwise it returns an error. |
| */ |
| rc = usb_hcd_check_unlink_urb(hcd, urb, status); |
| /* We have to check we haven't completed the urb or are about |
| * to complete it. When we do we set hcpriv to 0 so if this has |
| * already happened we don't put the urb in the cancel queue. |
| */ |
| if ((rc == 0) && urb->hcpriv) { |
| urbl->urb = urb; |
| urbl->port = (struct oz_port *)urb->hcpriv; |
| urbl->ep_num = usb_pipeendpoint(urb->pipe); |
| if (usb_pipein(urb->pipe)) |
| urbl->ep_num |= USB_DIR_IN; |
| list_add_tail(&urbl->link, &ozhcd->urb_cancel_list); |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| tasklet_schedule(&g_urb_cancel_tasklet); |
| } else { |
| spin_unlock_irqrestore(&g_tasklet_lock, irq_state); |
| oz_free_urb_link(urbl); |
| } |
| return rc; |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static void oz_hcd_endpoint_disable(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep) |
| { |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static void oz_hcd_endpoint_reset(struct usb_hcd *hcd, |
| struct usb_host_endpoint *ep) |
| { |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static int oz_hcd_get_frame_number(struct usb_hcd *hcd) |
| { |
| oz_dbg(ON, "oz_hcd_get_frame_number\n"); |
| return oz_usb_get_frame_number(); |
| } |
| |
| /* |
| * Context: softirq |
| * This is called as a consquence of us calling usb_hcd_poll_rh_status() and we |
| * always do that in softirq context. |
| */ |
| static int oz_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) |
| { |
| struct oz_hcd *ozhcd = oz_hcd_private(hcd); |
| int i; |
| |
| buf[0] = 0; |
| buf[1] = 0; |
| |
| spin_lock_bh(&ozhcd->hcd_lock); |
| for (i = 0; i < OZ_NB_PORTS; i++) { |
| if (ozhcd->ports[i].flags & OZ_PORT_F_CHANGED) { |
| oz_dbg(HUB, "Port %d changed\n", i); |
| ozhcd->ports[i].flags &= ~OZ_PORT_F_CHANGED; |
| if (i < 7) |
| buf[0] |= 1 << (i + 1); |
| else |
| buf[1] |= 1 << (i - 7); |
| } |
| } |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| if (buf[0] != 0 || buf[1] != 0) |
| return 2; |
| else |
| return 0; |
| } |
| |
| /* |
| * Context: process |
| */ |
| static void oz_get_hub_descriptor(struct usb_hcd *hcd, |
| struct usb_hub_descriptor *desc) |
| { |
| memset(desc, 0, sizeof(*desc)); |
| desc->bDescriptorType = 0x29; |
| desc->bDescLength = 9; |
| desc->wHubCharacteristics = (__force __u16)cpu_to_le16(0x0001); |
| desc->bNbrPorts = OZ_NB_PORTS; |
| } |
| |
| /* |
| * Context: process |
| */ |
| static int oz_set_port_feature(struct usb_hcd *hcd, u16 wvalue, u16 windex) |
| { |
| struct oz_port *port; |
| int err = 0; |
| u8 port_id = (u8)windex; |
| struct oz_hcd *ozhcd = oz_hcd_private(hcd); |
| unsigned set_bits = 0; |
| unsigned clear_bits = 0; |
| |
| if ((port_id < 1) || (port_id > OZ_NB_PORTS)) |
| return -EPIPE; |
| port = &ozhcd->ports[port_id-1]; |
| switch (wvalue) { |
| case USB_PORT_FEAT_CONNECTION: |
| oz_dbg(HUB, "USB_PORT_FEAT_CONNECTION\n"); |
| break; |
| case USB_PORT_FEAT_ENABLE: |
| oz_dbg(HUB, "USB_PORT_FEAT_ENABLE\n"); |
| break; |
| case USB_PORT_FEAT_SUSPEND: |
| oz_dbg(HUB, "USB_PORT_FEAT_SUSPEND\n"); |
| break; |
| case USB_PORT_FEAT_OVER_CURRENT: |
| oz_dbg(HUB, "USB_PORT_FEAT_OVER_CURRENT\n"); |
| break; |
| case USB_PORT_FEAT_RESET: |
| oz_dbg(HUB, "USB_PORT_FEAT_RESET\n"); |
| set_bits = USB_PORT_STAT_ENABLE | (USB_PORT_STAT_C_RESET<<16); |
| clear_bits = USB_PORT_STAT_RESET; |
| ozhcd->ports[port_id-1].bus_addr = 0; |
| break; |
| case USB_PORT_FEAT_POWER: |
| oz_dbg(HUB, "USB_PORT_FEAT_POWER\n"); |
| set_bits |= USB_PORT_STAT_POWER; |
| break; |
| case USB_PORT_FEAT_LOWSPEED: |
| oz_dbg(HUB, "USB_PORT_FEAT_LOWSPEED\n"); |
| break; |
| case USB_PORT_FEAT_C_CONNECTION: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_CONNECTION\n"); |
| break; |
| case USB_PORT_FEAT_C_ENABLE: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_ENABLE\n"); |
| break; |
| case USB_PORT_FEAT_C_SUSPEND: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_SUSPEND\n"); |
| break; |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_OVER_CURRENT\n"); |
| break; |
| case USB_PORT_FEAT_C_RESET: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_RESET\n"); |
| break; |
| case USB_PORT_FEAT_TEST: |
| oz_dbg(HUB, "USB_PORT_FEAT_TEST\n"); |
| break; |
| case USB_PORT_FEAT_INDICATOR: |
| oz_dbg(HUB, "USB_PORT_FEAT_INDICATOR\n"); |
| break; |
| default: |
| oz_dbg(HUB, "Other %d\n", wvalue); |
| break; |
| } |
| if (set_bits || clear_bits) { |
| spin_lock_bh(&port->port_lock); |
| port->status &= ~clear_bits; |
| port->status |= set_bits; |
| spin_unlock_bh(&port->port_lock); |
| } |
| oz_dbg(HUB, "Port[%d] status = 0x%x\n", port_id, port->status); |
| return err; |
| } |
| |
| /* |
| * Context: process |
| */ |
| static int oz_clear_port_feature(struct usb_hcd *hcd, u16 wvalue, u16 windex) |
| { |
| struct oz_port *port; |
| int err = 0; |
| u8 port_id = (u8)windex; |
| struct oz_hcd *ozhcd = oz_hcd_private(hcd); |
| unsigned clear_bits = 0; |
| |
| if ((port_id < 1) || (port_id > OZ_NB_PORTS)) |
| return -EPIPE; |
| port = &ozhcd->ports[port_id-1]; |
| switch (wvalue) { |
| case USB_PORT_FEAT_CONNECTION: |
| oz_dbg(HUB, "USB_PORT_FEAT_CONNECTION\n"); |
| break; |
| case USB_PORT_FEAT_ENABLE: |
| oz_dbg(HUB, "USB_PORT_FEAT_ENABLE\n"); |
| clear_bits = USB_PORT_STAT_ENABLE; |
| break; |
| case USB_PORT_FEAT_SUSPEND: |
| oz_dbg(HUB, "USB_PORT_FEAT_SUSPEND\n"); |
| break; |
| case USB_PORT_FEAT_OVER_CURRENT: |
| oz_dbg(HUB, "USB_PORT_FEAT_OVER_CURRENT\n"); |
| break; |
| case USB_PORT_FEAT_RESET: |
| oz_dbg(HUB, "USB_PORT_FEAT_RESET\n"); |
| break; |
| case USB_PORT_FEAT_POWER: |
| oz_dbg(HUB, "USB_PORT_FEAT_POWER\n"); |
| clear_bits |= USB_PORT_STAT_POWER; |
| break; |
| case USB_PORT_FEAT_LOWSPEED: |
| oz_dbg(HUB, "USB_PORT_FEAT_LOWSPEED\n"); |
| break; |
| case USB_PORT_FEAT_C_CONNECTION: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_CONNECTION\n"); |
| clear_bits = (USB_PORT_STAT_C_CONNECTION << 16); |
| break; |
| case USB_PORT_FEAT_C_ENABLE: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_ENABLE\n"); |
| clear_bits = (USB_PORT_STAT_C_ENABLE << 16); |
| break; |
| case USB_PORT_FEAT_C_SUSPEND: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_SUSPEND\n"); |
| break; |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_OVER_CURRENT\n"); |
| break; |
| case USB_PORT_FEAT_C_RESET: |
| oz_dbg(HUB, "USB_PORT_FEAT_C_RESET\n"); |
| clear_bits = (USB_PORT_FEAT_C_RESET << 16); |
| break; |
| case USB_PORT_FEAT_TEST: |
| oz_dbg(HUB, "USB_PORT_FEAT_TEST\n"); |
| break; |
| case USB_PORT_FEAT_INDICATOR: |
| oz_dbg(HUB, "USB_PORT_FEAT_INDICATOR\n"); |
| break; |
| default: |
| oz_dbg(HUB, "Other %d\n", wvalue); |
| break; |
| } |
| if (clear_bits) { |
| spin_lock_bh(&port->port_lock); |
| port->status &= ~clear_bits; |
| spin_unlock_bh(&port->port_lock); |
| } |
| oz_dbg(HUB, "Port[%d] status = 0x%x\n", |
| port_id, ozhcd->ports[port_id-1].status); |
| return err; |
| } |
| |
| /* |
| * Context: process |
| */ |
| static int oz_get_port_status(struct usb_hcd *hcd, u16 windex, char *buf) |
| { |
| struct oz_hcd *ozhcd; |
| u32 status; |
| |
| if ((windex < 1) || (windex > OZ_NB_PORTS)) |
| return -EPIPE; |
| ozhcd = oz_hcd_private(hcd); |
| oz_dbg(HUB, "GetPortStatus windex = %d\n", windex); |
| status = ozhcd->ports[windex-1].status; |
| put_unaligned(cpu_to_le32(status), (__le32 *)buf); |
| oz_dbg(HUB, "Port[%d] status = %x\n", windex, status); |
| return 0; |
| } |
| |
| /* |
| * Context: process |
| */ |
| static int oz_hcd_hub_control(struct usb_hcd *hcd, u16 req_type, u16 wvalue, |
| u16 windex, char *buf, u16 wlength) |
| { |
| int err = 0; |
| |
| switch (req_type) { |
| case ClearHubFeature: |
| oz_dbg(HUB, "ClearHubFeature: %d\n", req_type); |
| break; |
| case ClearPortFeature: |
| err = oz_clear_port_feature(hcd, wvalue, windex); |
| break; |
| case GetHubDescriptor: |
| oz_get_hub_descriptor(hcd, (struct usb_hub_descriptor *)buf); |
| break; |
| case GetHubStatus: |
| oz_dbg(HUB, "GetHubStatus: req_type = 0x%x\n", req_type); |
| put_unaligned(cpu_to_le32(0), (__le32 *)buf); |
| break; |
| case GetPortStatus: |
| err = oz_get_port_status(hcd, windex, buf); |
| break; |
| case SetHubFeature: |
| oz_dbg(HUB, "SetHubFeature: %d\n", req_type); |
| break; |
| case SetPortFeature: |
| err = oz_set_port_feature(hcd, wvalue, windex); |
| break; |
| default: |
| oz_dbg(HUB, "Other: %d\n", req_type); |
| break; |
| } |
| return err; |
| } |
| |
| /* |
| * Context: process |
| */ |
| static int oz_hcd_bus_suspend(struct usb_hcd *hcd) |
| { |
| struct oz_hcd *ozhcd; |
| |
| ozhcd = oz_hcd_private(hcd); |
| spin_lock_bh(&ozhcd->hcd_lock); |
| hcd->state = HC_STATE_SUSPENDED; |
| ozhcd->flags |= OZ_HDC_F_SUSPENDED; |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| return 0; |
| } |
| |
| /* |
| * Context: process |
| */ |
| static int oz_hcd_bus_resume(struct usb_hcd *hcd) |
| { |
| struct oz_hcd *ozhcd; |
| |
| ozhcd = oz_hcd_private(hcd); |
| spin_lock_bh(&ozhcd->hcd_lock); |
| ozhcd->flags &= ~OZ_HDC_F_SUSPENDED; |
| hcd->state = HC_STATE_RUNNING; |
| spin_unlock_bh(&ozhcd->hcd_lock); |
| return 0; |
| } |
| |
| static void oz_plat_shutdown(struct platform_device *dev) |
| { |
| } |
| |
| /* |
| * Context: process |
| */ |
| static int oz_plat_probe(struct platform_device *dev) |
| { |
| int i; |
| int err; |
| struct usb_hcd *hcd; |
| struct oz_hcd *ozhcd; |
| |
| hcd = usb_create_hcd(&g_oz_hc_drv, &dev->dev, dev_name(&dev->dev)); |
| if (hcd == NULL) { |
| oz_dbg(ON, "Failed to created hcd object OK\n"); |
| return -ENOMEM; |
| } |
| ozhcd = oz_hcd_private(hcd); |
| memset(ozhcd, 0, sizeof(*ozhcd)); |
| INIT_LIST_HEAD(&ozhcd->urb_pending_list); |
| INIT_LIST_HEAD(&ozhcd->urb_cancel_list); |
| INIT_LIST_HEAD(&ozhcd->orphanage); |
| ozhcd->hcd = hcd; |
| ozhcd->conn_port = -1; |
| spin_lock_init(&ozhcd->hcd_lock); |
| for (i = 0; i < OZ_NB_PORTS; i++) { |
| struct oz_port *port = &ozhcd->ports[i]; |
| port->ozhcd = ozhcd; |
| port->flags = 0; |
| port->status = 0; |
| port->bus_addr = 0xff; |
| spin_lock_init(&port->port_lock); |
| } |
| err = usb_add_hcd(hcd, 0, 0); |
| if (err) { |
| oz_dbg(ON, "Failed to add hcd object OK\n"); |
| usb_put_hcd(hcd); |
| return -1; |
| } |
| device_wakeup_enable(hcd->self.controller); |
| |
| spin_lock_bh(&g_hcdlock); |
| g_ozhcd = ozhcd; |
| spin_unlock_bh(&g_hcdlock); |
| return 0; |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static int oz_plat_remove(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct oz_hcd *ozhcd; |
| |
| if (hcd == NULL) |
| return -1; |
| ozhcd = oz_hcd_private(hcd); |
| spin_lock_bh(&g_hcdlock); |
| if (ozhcd == g_ozhcd) |
| g_ozhcd = NULL; |
| spin_unlock_bh(&g_hcdlock); |
| oz_dbg(ON, "Clearing orphanage\n"); |
| oz_hcd_clear_orphanage(ozhcd, -EPIPE); |
| oz_dbg(ON, "Removing hcd\n"); |
| usb_remove_hcd(hcd); |
| usb_put_hcd(hcd); |
| oz_empty_link_pool(); |
| return 0; |
| } |
| |
| /* |
| * Context: unknown |
| */ |
| static int oz_plat_suspend(struct platform_device *dev, pm_message_t msg) |
| { |
| return 0; |
| } |
| |
| |
| /* |
| * Context: unknown |
| */ |
| static int oz_plat_resume(struct platform_device *dev) |
| { |
| return 0; |
| } |
| |
| /* |
| * Context: process |
| */ |
| int oz_hcd_init(void) |
| { |
| int err; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| tasklet_init(&g_urb_process_tasklet, oz_urb_process_tasklet, 0); |
| tasklet_init(&g_urb_cancel_tasklet, oz_urb_cancel_tasklet, 0); |
| err = platform_driver_register(&g_oz_plat_drv); |
| oz_dbg(ON, "platform_driver_register() returned %d\n", err); |
| if (err) |
| goto error; |
| g_plat_dev = platform_device_alloc(OZ_PLAT_DEV_NAME, -1); |
| if (g_plat_dev == NULL) { |
| err = -ENOMEM; |
| goto error1; |
| } |
| oz_dbg(ON, "platform_device_alloc() succeeded\n"); |
| err = platform_device_add(g_plat_dev); |
| if (err) |
| goto error2; |
| oz_dbg(ON, "platform_device_add() succeeded\n"); |
| return 0; |
| error2: |
| platform_device_put(g_plat_dev); |
| error1: |
| platform_driver_unregister(&g_oz_plat_drv); |
| error: |
| tasklet_disable(&g_urb_process_tasklet); |
| tasklet_disable(&g_urb_cancel_tasklet); |
| oz_dbg(ON, "oz_hcd_init() failed %d\n", err); |
| return err; |
| } |
| |
| /* |
| * Context: process |
| */ |
| void oz_hcd_term(void) |
| { |
| msleep(OZ_HUB_DEBOUNCE_TIMEOUT); |
| tasklet_kill(&g_urb_process_tasklet); |
| tasklet_kill(&g_urb_cancel_tasklet); |
| platform_device_unregister(g_plat_dev); |
| platform_driver_unregister(&g_oz_plat_drv); |
| oz_dbg(ON, "Pending urbs:%d\n", atomic_read(&g_pending_urbs)); |
| } |