| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. |
| */ |
| #ifndef __ASM_SN_INTR_H |
| #define __ASM_SN_INTR_H |
| |
| /* |
| * Macros to manipulate the interrupt register on the calling hub chip. |
| */ |
| |
| #define LOCAL_HUB_SEND_INTR(level) \ |
| LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level))) |
| #define REMOTE_HUB_SEND_INTR(hub, level) \ |
| REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level))) |
| |
| /* |
| * When clearing the interrupt, make sure this clear does make it |
| * to the hub. Otherwise we could end up losing interrupts. |
| * We do an uncached load of the int_pend0 register to ensure this. |
| */ |
| |
| #define LOCAL_HUB_CLR_INTR(level) \ |
| do { \ |
| LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \ |
| LOCAL_HUB_L(PI_INT_PEND0); \ |
| } while (0); |
| |
| #define REMOTE_HUB_CLR_INTR(hub, level) \ |
| do { \ |
| nasid_t __hub = (hub); \ |
| \ |
| REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \ |
| REMOTE_HUB_L(__hub, PI_INT_PEND0); \ |
| } while (0); |
| |
| /* |
| * Hard-coded interrupt levels: |
| */ |
| |
| /* |
| * L0 = SW1 |
| * L1 = SW2 |
| * L2 = INT_PEND0 |
| * L3 = INT_PEND1 |
| * L4 = RTC |
| * L5 = Profiling Timer |
| * L6 = Hub Errors |
| * L7 = Count/Compare (T5 counters) |
| */ |
| |
| |
| /* |
| * INT_PEND0 hard-coded bits. |
| */ |
| |
| /* |
| * INT_PEND0 bits determined by hardware: |
| */ |
| #define RESERVED_INTR 0 /* What is this bit? */ |
| #define GFX_INTR_A 1 |
| #define GFX_INTR_B 2 |
| #define PG_MIG_INTR 3 |
| #define UART_INTR 4 |
| #define CC_PEND_A 5 |
| #define CC_PEND_B 6 |
| |
| /* |
| * INT_PEND0 used by the kernel for itself ... |
| */ |
| #define CPU_RESCHED_A_IRQ 7 |
| #define CPU_RESCHED_B_IRQ 8 |
| #define CPU_CALL_A_IRQ 9 |
| #define CPU_CALL_B_IRQ 10 |
| |
| /* |
| * INT_PEND1 hard-coded bits: |
| */ |
| #define NI_BRDCAST_ERR_A 39 |
| #define NI_BRDCAST_ERR_B 40 |
| |
| #define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */ |
| #define LLP_PFAIL_INTR_B 42 |
| |
| #define TLB_INTR_A 43 /* used for tlb flush random */ |
| #define TLB_INTR_B 44 |
| |
| #define IP27_INTR_0 45 /* Reserved for PROM use */ |
| #define IP27_INTR_1 46 /* do not use in Kernel */ |
| #define IP27_INTR_2 47 |
| #define IP27_INTR_3 48 |
| #define IP27_INTR_4 49 |
| #define IP27_INTR_5 50 |
| #define IP27_INTR_6 51 |
| #define IP27_INTR_7 52 |
| |
| #define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */ |
| /* Bridge Errors */ |
| #define DEBUG_INTR_A 54 |
| #define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */ |
| #define IO_ERROR_INTR 57 /* Setup by PROM */ |
| #define CLK_ERR_INTR 58 |
| #define COR_ERR_INTR_A 59 |
| #define COR_ERR_INTR_B 60 |
| #define MD_COR_ERR_INTR 61 |
| #define NI_ERROR_INTR 62 |
| #define MSC_PANIC_INTR 63 |
| |
| #endif /* __ASM_SN_INTR_H */ |