| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/ptrace.h> |
| #include <linux/sched.h> |
| #include <linux/ftrace.h> |
| #include <asm/siginfo.h> |
| #include <asm/signal.h> |
| #include <asm/unistd.h> |
| #include <frame_kern.h> |
| #include <kern_util.h> |
| #include <os.h> |
| |
| EXPORT_SYMBOL(block_signals); |
| EXPORT_SYMBOL(unblock_signals); |
| |
| void block_signals_trace(void) |
| { |
| block_signals(); |
| if (current_thread_info()) |
| trace_hardirqs_off(); |
| } |
| |
| void unblock_signals_trace(void) |
| { |
| if (current_thread_info()) |
| trace_hardirqs_on(); |
| unblock_signals(); |
| } |
| |
| void um_trace_signals_on(void) |
| { |
| if (current_thread_info()) |
| trace_hardirqs_on(); |
| } |
| |
| void um_trace_signals_off(void) |
| { |
| if (current_thread_info()) |
| trace_hardirqs_off(); |
| } |
| |
| /* |
| * OK, we're invoking a handler |
| */ |
| static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) |
| { |
| sigset_t *oldset = sigmask_to_save(); |
| int singlestep = 0; |
| unsigned long sp; |
| int err; |
| |
| if (test_thread_flag(TIF_SINGLESTEP) && (current->ptrace & PT_PTRACED)) |
| singlestep = 1; |
| |
| /* Did we come from a system call? */ |
| if (PT_REGS_SYSCALL_NR(regs) >= 0) { |
| /* If so, check system call restarting.. */ |
| switch (PT_REGS_SYSCALL_RET(regs)) { |
| case -ERESTART_RESTARTBLOCK: |
| case -ERESTARTNOHAND: |
| PT_REGS_SYSCALL_RET(regs) = -EINTR; |
| break; |
| |
| case -ERESTARTSYS: |
| if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { |
| PT_REGS_SYSCALL_RET(regs) = -EINTR; |
| break; |
| } |
| fallthrough; |
| case -ERESTARTNOINTR: |
| PT_REGS_RESTART_SYSCALL(regs); |
| PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs); |
| break; |
| } |
| } |
| |
| sp = PT_REGS_SP(regs); |
| if ((ksig->ka.sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0)) |
| sp = current->sas_ss_sp + current->sas_ss_size; |
| |
| #ifdef CONFIG_ARCH_HAS_SC_SIGNALS |
| if (!(ksig->ka.sa.sa_flags & SA_SIGINFO)) |
| err = setup_signal_stack_sc(sp, ksig, regs, oldset); |
| else |
| #endif |
| err = setup_signal_stack_si(sp, ksig, regs, oldset); |
| |
| signal_setup_done(err, ksig, singlestep); |
| } |
| |
| void do_signal(struct pt_regs *regs) |
| { |
| struct ksignal ksig; |
| int handled_sig = 0; |
| |
| while (get_signal(&ksig)) { |
| handled_sig = 1; |
| /* Whee! Actually deliver the signal. */ |
| handle_signal(&ksig, regs); |
| } |
| |
| /* Did we come from a system call? */ |
| if (!handled_sig && (PT_REGS_SYSCALL_NR(regs) >= 0)) { |
| /* Restart the system call - no handlers present */ |
| switch (PT_REGS_SYSCALL_RET(regs)) { |
| case -ERESTARTNOHAND: |
| case -ERESTARTSYS: |
| case -ERESTARTNOINTR: |
| PT_REGS_ORIG_SYSCALL(regs) = PT_REGS_SYSCALL_NR(regs); |
| PT_REGS_RESTART_SYSCALL(regs); |
| break; |
| case -ERESTART_RESTARTBLOCK: |
| PT_REGS_ORIG_SYSCALL(regs) = __NR_restart_syscall; |
| PT_REGS_RESTART_SYSCALL(regs); |
| break; |
| } |
| } |
| |
| /* |
| * This closes a way to execute a system call on the host. If |
| * you set a breakpoint on a system call instruction and singlestep |
| * from it, the tracing thread used to PTRACE_SINGLESTEP the process |
| * rather than PTRACE_SYSCALL it, allowing the system call to execute |
| * on the host. The tracing thread will check this flag and |
| * PTRACE_SYSCALL if necessary. |
| */ |
| if (test_thread_flag(TIF_SINGLESTEP)) |
| current->thread.singlestep_syscall = |
| is_syscall(PT_REGS_IP(¤t->thread.regs)); |
| |
| /* |
| * if there's no signal to deliver, we just put the saved sigmask |
| * back |
| */ |
| if (!handled_sig) |
| restore_saved_sigmask(); |
| } |