| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ddbridge-core.c: Digital Devices bridge core functions |
| * |
| * Copyright (C) 2010-2017 Digital Devices GmbH |
| * Marcus Metzler <mocm@metzlerbros.de> |
| * Ralph Metzler <rjkm@metzlerbros.de> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/poll.h> |
| #include <linux/io.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/timer.h> |
| #include <linux/i2c.h> |
| #include <linux/swab.h> |
| #include <linux/vmalloc.h> |
| |
| #include "ddbridge.h" |
| #include "ddbridge-i2c.h" |
| #include "ddbridge-regs.h" |
| #include "ddbridge-max.h" |
| #include "ddbridge-ci.h" |
| #include "ddbridge-io.h" |
| |
| #include "tda18271c2dd.h" |
| #include "stv6110x.h" |
| #include "stv090x.h" |
| #include "lnbh24.h" |
| #include "drxk.h" |
| #include "stv0367.h" |
| #include "stv0367_priv.h" |
| #include "cxd2841er.h" |
| #include "tda18212.h" |
| #include "stv0910.h" |
| #include "stv6111.h" |
| #include "lnbh25.h" |
| #include "cxd2099.h" |
| #include "ddbridge-dummy-fe.h" |
| |
| /****************************************************************************/ |
| |
| #define DDB_MAX_ADAPTER 64 |
| |
| /****************************************************************************/ |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static int adapter_alloc; |
| module_param(adapter_alloc, int, 0444); |
| MODULE_PARM_DESC(adapter_alloc, |
| "0-one adapter per io, 1-one per tab with io, 2-one per tab, 3-one for all"); |
| |
| static int ci_bitrate = 70000; |
| module_param(ci_bitrate, int, 0444); |
| MODULE_PARM_DESC(ci_bitrate, " Bitrate in KHz for output to CI."); |
| |
| static int ts_loop = -1; |
| module_param(ts_loop, int, 0444); |
| MODULE_PARM_DESC(ts_loop, "TS in/out test loop on port ts_loop"); |
| |
| static int xo2_speed = 2; |
| module_param(xo2_speed, int, 0444); |
| MODULE_PARM_DESC(xo2_speed, "default transfer speed for xo2 based duoflex, 0=55,1=75,2=90,3=104 MBit/s, default=2, use attribute to change for individual cards"); |
| |
| #ifdef __arm__ |
| static int alt_dma = 1; |
| #else |
| static int alt_dma; |
| #endif |
| module_param(alt_dma, int, 0444); |
| MODULE_PARM_DESC(alt_dma, "use alternative DMA buffer handling"); |
| |
| static int no_init; |
| module_param(no_init, int, 0444); |
| MODULE_PARM_DESC(no_init, "do not initialize most devices"); |
| |
| static int stv0910_single; |
| module_param(stv0910_single, int, 0444); |
| MODULE_PARM_DESC(stv0910_single, "use stv0910 cards as single demods"); |
| |
| static int dma_buf_num = 8; |
| module_param(dma_buf_num, int, 0444); |
| MODULE_PARM_DESC(dma_buf_num, "Number of DMA buffers, possible values: 8-32"); |
| |
| static int dma_buf_size = 21; |
| module_param(dma_buf_size, int, 0444); |
| MODULE_PARM_DESC(dma_buf_size, |
| "DMA buffer size as multiple of 128*47, possible values: 1-43"); |
| |
| static int dummy_tuner; |
| module_param(dummy_tuner, int, 0444); |
| MODULE_PARM_DESC(dummy_tuner, |
| "attach dummy tuner to port 0 on Octopus V3 or Octopus Mini cards"); |
| |
| /****************************************************************************/ |
| |
| static DEFINE_MUTEX(redirect_lock); |
| |
| static struct workqueue_struct *ddb_wq; |
| |
| static struct ddb *ddbs[DDB_MAX_ADAPTER]; |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| struct ddb_irq *ddb_irq_set(struct ddb *dev, u32 link, u32 nr, |
| void (*handler)(void *), void *data) |
| { |
| struct ddb_irq *irq = &dev->link[link].irq[nr]; |
| |
| irq->handler = handler; |
| irq->data = data; |
| return irq; |
| } |
| |
| static void ddb_set_dma_table(struct ddb_io *io) |
| { |
| struct ddb *dev = io->port->dev; |
| struct ddb_dma *dma = io->dma; |
| u32 i; |
| u64 mem; |
| |
| if (!dma) |
| return; |
| for (i = 0; i < dma->num; i++) { |
| mem = dma->pbuf[i]; |
| ddbwritel(dev, mem & 0xffffffff, dma->bufregs + i * 8); |
| ddbwritel(dev, mem >> 32, dma->bufregs + i * 8 + 4); |
| } |
| dma->bufval = ((dma->div & 0x0f) << 16) | |
| ((dma->num & 0x1f) << 11) | |
| ((dma->size >> 7) & 0x7ff); |
| } |
| |
| static void ddb_set_dma_tables(struct ddb *dev) |
| { |
| u32 i; |
| |
| for (i = 0; i < DDB_MAX_PORT; i++) { |
| if (dev->port[i].input[0]) |
| ddb_set_dma_table(dev->port[i].input[0]); |
| if (dev->port[i].input[1]) |
| ddb_set_dma_table(dev->port[i].input[1]); |
| if (dev->port[i].output) |
| ddb_set_dma_table(dev->port[i].output); |
| } |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static void ddb_redirect_dma(struct ddb *dev, |
| struct ddb_dma *sdma, |
| struct ddb_dma *ddma) |
| { |
| u32 i, base; |
| u64 mem; |
| |
| sdma->bufval = ddma->bufval; |
| base = sdma->bufregs; |
| for (i = 0; i < ddma->num; i++) { |
| mem = ddma->pbuf[i]; |
| ddbwritel(dev, mem & 0xffffffff, base + i * 8); |
| ddbwritel(dev, mem >> 32, base + i * 8 + 4); |
| } |
| } |
| |
| static int ddb_unredirect(struct ddb_port *port) |
| { |
| struct ddb_input *oredi, *iredi = NULL; |
| struct ddb_output *iredo = NULL; |
| |
| /* dev_info(port->dev->dev, |
| * "unredirect %d.%d\n", port->dev->nr, port->nr); |
| */ |
| mutex_lock(&redirect_lock); |
| if (port->output->dma->running) { |
| mutex_unlock(&redirect_lock); |
| return -EBUSY; |
| } |
| oredi = port->output->redi; |
| if (!oredi) |
| goto done; |
| if (port->input[0]) { |
| iredi = port->input[0]->redi; |
| iredo = port->input[0]->redo; |
| |
| if (iredo) { |
| iredo->port->output->redi = oredi; |
| if (iredo->port->input[0]) { |
| iredo->port->input[0]->redi = iredi; |
| ddb_redirect_dma(oredi->port->dev, |
| oredi->dma, iredo->dma); |
| } |
| port->input[0]->redo = NULL; |
| ddb_set_dma_table(port->input[0]); |
| } |
| oredi->redi = iredi; |
| port->input[0]->redi = NULL; |
| } |
| oredi->redo = NULL; |
| port->output->redi = NULL; |
| |
| ddb_set_dma_table(oredi); |
| done: |
| mutex_unlock(&redirect_lock); |
| return 0; |
| } |
| |
| static int ddb_redirect(u32 i, u32 p) |
| { |
| struct ddb *idev = ddbs[(i >> 4) & 0x3f]; |
| struct ddb_input *input, *input2; |
| struct ddb *pdev = ddbs[(p >> 4) & 0x3f]; |
| struct ddb_port *port; |
| |
| if (!idev || !pdev) |
| return -EINVAL; |
| if (!idev->has_dma || !pdev->has_dma) |
| return -EINVAL; |
| |
| port = &pdev->port[p & 0x0f]; |
| if (!port->output) |
| return -EINVAL; |
| if (ddb_unredirect(port)) |
| return -EBUSY; |
| |
| if (i == 8) |
| return 0; |
| |
| input = &idev->input[i & 7]; |
| if (!input) |
| return -EINVAL; |
| |
| mutex_lock(&redirect_lock); |
| if (port->output->dma->running || input->dma->running) { |
| mutex_unlock(&redirect_lock); |
| return -EBUSY; |
| } |
| input2 = port->input[0]; |
| if (input2) { |
| if (input->redi) { |
| input2->redi = input->redi; |
| input->redi = NULL; |
| } else { |
| input2->redi = input; |
| } |
| } |
| input->redo = port->output; |
| port->output->redi = input; |
| |
| ddb_redirect_dma(input->port->dev, input->dma, port->output->dma); |
| mutex_unlock(&redirect_lock); |
| return 0; |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static void dma_free(struct pci_dev *pdev, struct ddb_dma *dma, int dir) |
| { |
| int i; |
| |
| if (!dma) |
| return; |
| for (i = 0; i < dma->num; i++) { |
| if (dma->vbuf[i]) { |
| if (alt_dma) { |
| dma_unmap_single(&pdev->dev, dma->pbuf[i], |
| dma->size, |
| dir ? DMA_TO_DEVICE : |
| DMA_FROM_DEVICE); |
| kfree(dma->vbuf[i]); |
| dma->vbuf[i] = NULL; |
| } else { |
| dma_free_coherent(&pdev->dev, dma->size, |
| dma->vbuf[i], dma->pbuf[i]); |
| } |
| |
| dma->vbuf[i] = NULL; |
| } |
| } |
| } |
| |
| static int dma_alloc(struct pci_dev *pdev, struct ddb_dma *dma, int dir) |
| { |
| int i; |
| |
| if (!dma) |
| return 0; |
| for (i = 0; i < dma->num; i++) { |
| if (alt_dma) { |
| dma->vbuf[i] = kmalloc(dma->size, __GFP_RETRY_MAYFAIL); |
| if (!dma->vbuf[i]) |
| return -ENOMEM; |
| dma->pbuf[i] = dma_map_single(&pdev->dev, |
| dma->vbuf[i], |
| dma->size, |
| dir ? DMA_TO_DEVICE : |
| DMA_FROM_DEVICE); |
| if (dma_mapping_error(&pdev->dev, dma->pbuf[i])) { |
| kfree(dma->vbuf[i]); |
| dma->vbuf[i] = NULL; |
| return -ENOMEM; |
| } |
| } else { |
| dma->vbuf[i] = dma_alloc_coherent(&pdev->dev, |
| dma->size, |
| &dma->pbuf[i], |
| GFP_KERNEL); |
| if (!dma->vbuf[i]) |
| return -ENOMEM; |
| } |
| } |
| return 0; |
| } |
| |
| int ddb_buffers_alloc(struct ddb *dev) |
| { |
| int i; |
| struct ddb_port *port; |
| |
| for (i = 0; i < dev->port_num; i++) { |
| port = &dev->port[i]; |
| switch (port->class) { |
| case DDB_PORT_TUNER: |
| if (port->input[0]->dma) |
| if (dma_alloc(dev->pdev, port->input[0]->dma, 0) |
| < 0) |
| return -1; |
| if (port->input[1]->dma) |
| if (dma_alloc(dev->pdev, port->input[1]->dma, 0) |
| < 0) |
| return -1; |
| break; |
| case DDB_PORT_CI: |
| case DDB_PORT_LOOP: |
| if (port->input[0]->dma) |
| if (dma_alloc(dev->pdev, port->input[0]->dma, 0) |
| < 0) |
| return -1; |
| if (port->output->dma) |
| if (dma_alloc(dev->pdev, port->output->dma, 1) |
| < 0) |
| return -1; |
| break; |
| default: |
| break; |
| } |
| } |
| ddb_set_dma_tables(dev); |
| return 0; |
| } |
| |
| void ddb_buffers_free(struct ddb *dev) |
| { |
| int i; |
| struct ddb_port *port; |
| |
| for (i = 0; i < dev->port_num; i++) { |
| port = &dev->port[i]; |
| |
| if (port->input[0] && port->input[0]->dma) |
| dma_free(dev->pdev, port->input[0]->dma, 0); |
| if (port->input[1] && port->input[1]->dma) |
| dma_free(dev->pdev, port->input[1]->dma, 0); |
| if (port->output && port->output->dma) |
| dma_free(dev->pdev, port->output->dma, 1); |
| } |
| } |
| |
| static void calc_con(struct ddb_output *output, u32 *con, u32 *con2, u32 flags) |
| { |
| struct ddb *dev = output->port->dev; |
| u32 bitrate = output->port->obr, max_bitrate = 72000; |
| u32 gap = 4, nco = 0; |
| |
| *con = 0x1c; |
| if (output->port->gap != 0xffffffff) { |
| flags |= 1; |
| gap = output->port->gap; |
| max_bitrate = 0; |
| } |
| if (dev->link[0].info->type == DDB_OCTOPUS_CI && output->port->nr > 1) { |
| *con = 0x10c; |
| if (dev->link[0].ids.regmapid >= 0x10003 && !(flags & 1)) { |
| if (!(flags & 2)) { |
| /* NCO */ |
| max_bitrate = 0; |
| gap = 0; |
| if (bitrate != 72000) { |
| if (bitrate >= 96000) { |
| *con |= 0x800; |
| } else { |
| *con |= 0x1000; |
| nco = (bitrate * 8192 + 71999) |
| / 72000; |
| } |
| } |
| } else { |
| /* Divider and gap */ |
| *con |= 0x1810; |
| if (bitrate <= 64000) { |
| max_bitrate = 64000; |
| nco = 8; |
| } else if (bitrate <= 72000) { |
| max_bitrate = 72000; |
| nco = 7; |
| } else { |
| max_bitrate = 96000; |
| nco = 5; |
| } |
| } |
| } else { |
| if (bitrate > 72000) { |
| *con |= 0x810; /* 96 MBit/s and gap */ |
| max_bitrate = 96000; |
| } |
| *con |= 0x10; /* enable gap */ |
| } |
| } |
| if (max_bitrate > 0) { |
| if (bitrate > max_bitrate) |
| bitrate = max_bitrate; |
| if (bitrate < 31000) |
| bitrate = 31000; |
| gap = ((max_bitrate - bitrate) * 94) / bitrate; |
| if (gap < 2) |
| *con &= ~0x10; /* Disable gap */ |
| else |
| gap -= 2; |
| if (gap > 127) |
| gap = 127; |
| } |
| |
| *con2 = (nco << 16) | gap; |
| } |
| |
| static void ddb_output_start(struct ddb_output *output) |
| { |
| struct ddb *dev = output->port->dev; |
| u32 con = 0x11c, con2 = 0; |
| |
| spin_lock_irq(&output->dma->lock); |
| output->dma->cbuf = 0; |
| output->dma->coff = 0; |
| output->dma->stat = 0; |
| ddbwritel(dev, 0, DMA_BUFFER_CONTROL(output->dma)); |
| |
| if (output->port->input[0]->port->class == DDB_PORT_LOOP) |
| con = (1UL << 13) | 0x14; |
| else |
| calc_con(output, &con, &con2, 0); |
| |
| ddbwritel(dev, 0, TS_CONTROL(output)); |
| ddbwritel(dev, 2, TS_CONTROL(output)); |
| ddbwritel(dev, 0, TS_CONTROL(output)); |
| ddbwritel(dev, con, TS_CONTROL(output)); |
| ddbwritel(dev, con2, TS_CONTROL2(output)); |
| |
| ddbwritel(dev, output->dma->bufval, |
| DMA_BUFFER_SIZE(output->dma)); |
| ddbwritel(dev, 0, DMA_BUFFER_ACK(output->dma)); |
| ddbwritel(dev, 1, DMA_BASE_READ); |
| ddbwritel(dev, 7, DMA_BUFFER_CONTROL(output->dma)); |
| |
| ddbwritel(dev, con | 1, TS_CONTROL(output)); |
| |
| output->dma->running = 1; |
| spin_unlock_irq(&output->dma->lock); |
| } |
| |
| static void ddb_output_stop(struct ddb_output *output) |
| { |
| struct ddb *dev = output->port->dev; |
| |
| spin_lock_irq(&output->dma->lock); |
| |
| ddbwritel(dev, 0, TS_CONTROL(output)); |
| |
| ddbwritel(dev, 0, DMA_BUFFER_CONTROL(output->dma)); |
| output->dma->running = 0; |
| spin_unlock_irq(&output->dma->lock); |
| } |
| |
| static void ddb_input_stop(struct ddb_input *input) |
| { |
| struct ddb *dev = input->port->dev; |
| u32 tag = DDB_LINK_TAG(input->port->lnr); |
| |
| spin_lock_irq(&input->dma->lock); |
| |
| ddbwritel(dev, 0, tag | TS_CONTROL(input)); |
| |
| ddbwritel(dev, 0, DMA_BUFFER_CONTROL(input->dma)); |
| input->dma->running = 0; |
| spin_unlock_irq(&input->dma->lock); |
| } |
| |
| static void ddb_input_start(struct ddb_input *input) |
| { |
| struct ddb *dev = input->port->dev; |
| |
| spin_lock_irq(&input->dma->lock); |
| input->dma->cbuf = 0; |
| input->dma->coff = 0; |
| input->dma->stat = 0; |
| ddbwritel(dev, 0, DMA_BUFFER_CONTROL(input->dma)); |
| |
| ddbwritel(dev, 0, TS_CONTROL(input)); |
| ddbwritel(dev, 2, TS_CONTROL(input)); |
| ddbwritel(dev, 0, TS_CONTROL(input)); |
| |
| ddbwritel(dev, input->dma->bufval, |
| DMA_BUFFER_SIZE(input->dma)); |
| ddbwritel(dev, 0, DMA_BUFFER_ACK(input->dma)); |
| ddbwritel(dev, 1, DMA_BASE_WRITE); |
| ddbwritel(dev, 3, DMA_BUFFER_CONTROL(input->dma)); |
| |
| ddbwritel(dev, 0x09, TS_CONTROL(input)); |
| |
| if (input->port->type == DDB_TUNER_DUMMY) |
| ddbwritel(dev, 0x000fff01, TS_CONTROL2(input)); |
| |
| input->dma->running = 1; |
| spin_unlock_irq(&input->dma->lock); |
| } |
| |
| static void ddb_input_start_all(struct ddb_input *input) |
| { |
| struct ddb_input *i = input; |
| struct ddb_output *o; |
| |
| mutex_lock(&redirect_lock); |
| while (i && (o = i->redo)) { |
| ddb_output_start(o); |
| i = o->port->input[0]; |
| if (i) |
| ddb_input_start(i); |
| } |
| ddb_input_start(input); |
| mutex_unlock(&redirect_lock); |
| } |
| |
| static void ddb_input_stop_all(struct ddb_input *input) |
| { |
| struct ddb_input *i = input; |
| struct ddb_output *o; |
| |
| mutex_lock(&redirect_lock); |
| ddb_input_stop(input); |
| while (i && (o = i->redo)) { |
| ddb_output_stop(o); |
| i = o->port->input[0]; |
| if (i) |
| ddb_input_stop(i); |
| } |
| mutex_unlock(&redirect_lock); |
| } |
| |
| static u32 ddb_output_free(struct ddb_output *output) |
| { |
| u32 idx, off, stat = output->dma->stat; |
| s32 diff; |
| |
| idx = (stat >> 11) & 0x1f; |
| off = (stat & 0x7ff) << 7; |
| |
| if (output->dma->cbuf != idx) { |
| if ((((output->dma->cbuf + 1) % output->dma->num) == idx) && |
| (output->dma->size - output->dma->coff <= (2 * 188))) |
| return 0; |
| return 188; |
| } |
| diff = off - output->dma->coff; |
| if (diff <= 0 || diff > (2 * 188)) |
| return 188; |
| return 0; |
| } |
| |
| static ssize_t ddb_output_write(struct ddb_output *output, |
| const __user u8 *buf, size_t count) |
| { |
| struct ddb *dev = output->port->dev; |
| u32 idx, off, stat = output->dma->stat; |
| u32 left = count, len; |
| |
| idx = (stat >> 11) & 0x1f; |
| off = (stat & 0x7ff) << 7; |
| |
| while (left) { |
| len = output->dma->size - output->dma->coff; |
| if ((((output->dma->cbuf + 1) % output->dma->num) == idx) && |
| off == 0) { |
| if (len <= 188) |
| break; |
| len -= 188; |
| } |
| if (output->dma->cbuf == idx) { |
| if (off > output->dma->coff) { |
| len = off - output->dma->coff; |
| len -= (len % 188); |
| if (len <= 188) |
| break; |
| len -= 188; |
| } |
| } |
| if (len > left) |
| len = left; |
| if (copy_from_user(output->dma->vbuf[output->dma->cbuf] + |
| output->dma->coff, |
| buf, len)) |
| return -EIO; |
| if (alt_dma) |
| dma_sync_single_for_device( |
| dev->dev, |
| output->dma->pbuf[output->dma->cbuf], |
| output->dma->size, DMA_TO_DEVICE); |
| left -= len; |
| buf += len; |
| output->dma->coff += len; |
| if (output->dma->coff == output->dma->size) { |
| output->dma->coff = 0; |
| output->dma->cbuf = ((output->dma->cbuf + 1) % |
| output->dma->num); |
| } |
| ddbwritel(dev, |
| (output->dma->cbuf << 11) | |
| (output->dma->coff >> 7), |
| DMA_BUFFER_ACK(output->dma)); |
| } |
| return count - left; |
| } |
| |
| static u32 ddb_input_avail(struct ddb_input *input) |
| { |
| struct ddb *dev = input->port->dev; |
| u32 idx, off, stat = input->dma->stat; |
| u32 ctrl = ddbreadl(dev, DMA_BUFFER_CONTROL(input->dma)); |
| |
| idx = (stat >> 11) & 0x1f; |
| off = (stat & 0x7ff) << 7; |
| |
| if (ctrl & 4) { |
| dev_err(dev->dev, "IA %d %d %08x\n", idx, off, ctrl); |
| ddbwritel(dev, stat, DMA_BUFFER_ACK(input->dma)); |
| return 0; |
| } |
| if (input->dma->cbuf != idx) |
| return 188; |
| return 0; |
| } |
| |
| static ssize_t ddb_input_read(struct ddb_input *input, |
| __user u8 *buf, size_t count) |
| { |
| struct ddb *dev = input->port->dev; |
| u32 left = count; |
| u32 idx, free, stat = input->dma->stat; |
| int ret; |
| |
| idx = (stat >> 11) & 0x1f; |
| |
| while (left) { |
| if (input->dma->cbuf == idx) |
| return count - left; |
| free = input->dma->size - input->dma->coff; |
| if (free > left) |
| free = left; |
| if (alt_dma) |
| dma_sync_single_for_cpu( |
| dev->dev, |
| input->dma->pbuf[input->dma->cbuf], |
| input->dma->size, DMA_FROM_DEVICE); |
| ret = copy_to_user(buf, input->dma->vbuf[input->dma->cbuf] + |
| input->dma->coff, free); |
| if (ret) |
| return -EFAULT; |
| input->dma->coff += free; |
| if (input->dma->coff == input->dma->size) { |
| input->dma->coff = 0; |
| input->dma->cbuf = (input->dma->cbuf + 1) % |
| input->dma->num; |
| } |
| left -= free; |
| buf += free; |
| ddbwritel(dev, |
| (input->dma->cbuf << 11) | (input->dma->coff >> 7), |
| DMA_BUFFER_ACK(input->dma)); |
| } |
| return count; |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static ssize_t ts_write(struct file *file, const __user char *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct ddb_output *output = dvbdev->priv; |
| struct ddb *dev = output->port->dev; |
| size_t left = count; |
| int stat; |
| |
| if (!dev->has_dma) |
| return -EINVAL; |
| while (left) { |
| if (ddb_output_free(output) < 188) { |
| if (file->f_flags & O_NONBLOCK) |
| break; |
| if (wait_event_interruptible( |
| output->dma->wq, |
| ddb_output_free(output) >= 188) < 0) |
| break; |
| } |
| stat = ddb_output_write(output, buf, left); |
| if (stat < 0) |
| return stat; |
| buf += stat; |
| left -= stat; |
| } |
| return (left == count) ? -EAGAIN : (count - left); |
| } |
| |
| static ssize_t ts_read(struct file *file, __user char *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct ddb_output *output = dvbdev->priv; |
| struct ddb_input *input = output->port->input[0]; |
| struct ddb *dev = output->port->dev; |
| size_t left = count; |
| int stat; |
| |
| if (!dev->has_dma) |
| return -EINVAL; |
| while (left) { |
| if (ddb_input_avail(input) < 188) { |
| if (file->f_flags & O_NONBLOCK) |
| break; |
| if (wait_event_interruptible( |
| input->dma->wq, |
| ddb_input_avail(input) >= 188) < 0) |
| break; |
| } |
| stat = ddb_input_read(input, buf, left); |
| if (stat < 0) |
| return stat; |
| left -= stat; |
| buf += stat; |
| } |
| return (count && (left == count)) ? -EAGAIN : (count - left); |
| } |
| |
| static __poll_t ts_poll(struct file *file, poll_table *wait) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct ddb_output *output = dvbdev->priv; |
| struct ddb_input *input = output->port->input[0]; |
| |
| __poll_t mask = 0; |
| |
| poll_wait(file, &input->dma->wq, wait); |
| poll_wait(file, &output->dma->wq, wait); |
| if (ddb_input_avail(input) >= 188) |
| mask |= EPOLLIN | EPOLLRDNORM; |
| if (ddb_output_free(output) >= 188) |
| mask |= EPOLLOUT | EPOLLWRNORM; |
| return mask; |
| } |
| |
| static int ts_release(struct inode *inode, struct file *file) |
| { |
| struct dvb_device *dvbdev = file->private_data; |
| struct ddb_output *output = NULL; |
| struct ddb_input *input = NULL; |
| |
| if (dvbdev) { |
| output = dvbdev->priv; |
| input = output->port->input[0]; |
| } |
| |
| if ((file->f_flags & O_ACCMODE) == O_RDONLY) { |
| if (!input) |
| return -EINVAL; |
| ddb_input_stop(input); |
| } else if ((file->f_flags & O_ACCMODE) == O_WRONLY) { |
| if (!output) |
| return -EINVAL; |
| ddb_output_stop(output); |
| } |
| return dvb_generic_release(inode, file); |
| } |
| |
| static int ts_open(struct inode *inode, struct file *file) |
| { |
| int err; |
| struct dvb_device *dvbdev = file->private_data; |
| struct ddb_output *output = NULL; |
| struct ddb_input *input = NULL; |
| |
| if (dvbdev) { |
| output = dvbdev->priv; |
| input = output->port->input[0]; |
| } |
| |
| if ((file->f_flags & O_ACCMODE) == O_RDONLY) { |
| if (!input) |
| return -EINVAL; |
| if (input->redo || input->redi) |
| return -EBUSY; |
| } else if ((file->f_flags & O_ACCMODE) == O_WRONLY) { |
| if (!output) |
| return -EINVAL; |
| } else { |
| return -EINVAL; |
| } |
| |
| err = dvb_generic_open(inode, file); |
| if (err < 0) |
| return err; |
| if ((file->f_flags & O_ACCMODE) == O_RDONLY) |
| ddb_input_start(input); |
| else if ((file->f_flags & O_ACCMODE) == O_WRONLY) |
| ddb_output_start(output); |
| return err; |
| } |
| |
| static const struct file_operations ci_fops = { |
| .owner = THIS_MODULE, |
| .read = ts_read, |
| .write = ts_write, |
| .open = ts_open, |
| .release = ts_release, |
| .poll = ts_poll, |
| .mmap = NULL, |
| }; |
| |
| static struct dvb_device dvbdev_ci = { |
| .priv = NULL, |
| .readers = 1, |
| .writers = 1, |
| .users = 2, |
| .fops = &ci_fops, |
| }; |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static int locked_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct ddb_input *input = fe->sec_priv; |
| struct ddb_port *port = input->port; |
| struct ddb_dvb *dvb = &port->dvb[input->nr & 1]; |
| int status; |
| |
| if (enable) { |
| mutex_lock(&port->i2c_gate_lock); |
| status = dvb->i2c_gate_ctrl(fe, 1); |
| } else { |
| status = dvb->i2c_gate_ctrl(fe, 0); |
| mutex_unlock(&port->i2c_gate_lock); |
| } |
| return status; |
| } |
| |
| static int demod_attach_drxk(struct ddb_input *input) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| struct drxk_config config; |
| |
| memset(&config, 0, sizeof(config)); |
| config.adr = 0x29 + (input->nr & 1); |
| config.microcode_name = "drxk_a3.mc"; |
| |
| dvb->fe = dvb_attach(drxk_attach, &config, i2c); |
| if (!dvb->fe) { |
| dev_err(dev, "No DRXK found!\n"); |
| return -ENODEV; |
| } |
| dvb->fe->sec_priv = input; |
| dvb->i2c_gate_ctrl = dvb->fe->ops.i2c_gate_ctrl; |
| dvb->fe->ops.i2c_gate_ctrl = locked_gate_ctrl; |
| return 0; |
| } |
| |
| static int tuner_attach_tda18271(struct ddb_input *input) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| struct dvb_frontend *fe; |
| |
| if (dvb->fe->ops.i2c_gate_ctrl) |
| dvb->fe->ops.i2c_gate_ctrl(dvb->fe, 1); |
| fe = dvb_attach(tda18271c2dd_attach, dvb->fe, i2c, 0x60); |
| if (dvb->fe->ops.i2c_gate_ctrl) |
| dvb->fe->ops.i2c_gate_ctrl(dvb->fe, 0); |
| if (!fe) { |
| dev_err(dev, "No TDA18271 found!\n"); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| /******************************************************************************/ |
| /******************************************************************************/ |
| /******************************************************************************/ |
| |
| static struct stv0367_config ddb_stv0367_config[] = { |
| { |
| .demod_address = 0x1f, |
| .xtal = 27000000, |
| .if_khz = 0, |
| .if_iq_mode = FE_TER_NORMAL_IF_TUNER, |
| .ts_mode = STV0367_SERIAL_PUNCT_CLOCK, |
| .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT, |
| }, { |
| .demod_address = 0x1e, |
| .xtal = 27000000, |
| .if_khz = 0, |
| .if_iq_mode = FE_TER_NORMAL_IF_TUNER, |
| .ts_mode = STV0367_SERIAL_PUNCT_CLOCK, |
| .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT, |
| }, |
| }; |
| |
| static int demod_attach_stv0367(struct ddb_input *input) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| |
| /* attach frontend */ |
| dvb->fe = dvb_attach(stv0367ddb_attach, |
| &ddb_stv0367_config[(input->nr & 1)], i2c); |
| |
| if (!dvb->fe) { |
| dev_err(dev, "No stv0367 found!\n"); |
| return -ENODEV; |
| } |
| dvb->fe->sec_priv = input; |
| dvb->i2c_gate_ctrl = dvb->fe->ops.i2c_gate_ctrl; |
| dvb->fe->ops.i2c_gate_ctrl = locked_gate_ctrl; |
| return 0; |
| } |
| |
| static int tuner_tda18212_ping(struct ddb_input *input, unsigned short adr) |
| { |
| struct i2c_adapter *adapter = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| u8 tda_id[2]; |
| u8 subaddr = 0x00; |
| |
| dev_dbg(dev, "stv0367-tda18212 tuner ping\n"); |
| if (dvb->fe->ops.i2c_gate_ctrl) |
| dvb->fe->ops.i2c_gate_ctrl(dvb->fe, 1); |
| |
| if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0) |
| dev_dbg(dev, "tda18212 ping 1 fail\n"); |
| if (i2c_read_regs(adapter, adr, subaddr, tda_id, sizeof(tda_id)) < 0) |
| dev_warn(dev, "tda18212 ping failed, expect problems\n"); |
| |
| if (dvb->fe->ops.i2c_gate_ctrl) |
| dvb->fe->ops.i2c_gate_ctrl(dvb->fe, 0); |
| |
| return 0; |
| } |
| |
| static int demod_attach_cxd28xx(struct ddb_input *input, int par, int osc24) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| struct cxd2841er_config cfg; |
| |
| /* the cxd2841er driver expects 8bit/shifted I2C addresses */ |
| cfg.i2c_addr = ((input->nr & 1) ? 0x6d : 0x6c) << 1; |
| |
| cfg.xtal = osc24 ? SONY_XTAL_24000 : SONY_XTAL_20500; |
| cfg.flags = CXD2841ER_AUTO_IFHZ | CXD2841ER_EARLY_TUNE | |
| CXD2841ER_NO_WAIT_LOCK | CXD2841ER_NO_AGCNEG | |
| CXD2841ER_TSBITS; |
| |
| if (!par) |
| cfg.flags |= CXD2841ER_TS_SERIAL; |
| |
| /* attach frontend */ |
| dvb->fe = dvb_attach(cxd2841er_attach_t_c, &cfg, i2c); |
| |
| if (!dvb->fe) { |
| dev_err(dev, "No cxd2837/38/43/54 found!\n"); |
| return -ENODEV; |
| } |
| dvb->fe->sec_priv = input; |
| dvb->i2c_gate_ctrl = dvb->fe->ops.i2c_gate_ctrl; |
| dvb->fe->ops.i2c_gate_ctrl = locked_gate_ctrl; |
| return 0; |
| } |
| |
| static int tuner_attach_tda18212(struct ddb_input *input, u32 porttype) |
| { |
| struct i2c_adapter *adapter = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| struct i2c_client *client; |
| struct tda18212_config config = { |
| .fe = dvb->fe, |
| .if_dvbt_6 = 3550, |
| .if_dvbt_7 = 3700, |
| .if_dvbt_8 = 4150, |
| .if_dvbt2_6 = 3250, |
| .if_dvbt2_7 = 4000, |
| .if_dvbt2_8 = 4000, |
| .if_dvbc = 5000, |
| }; |
| u8 addr = (input->nr & 1) ? 0x63 : 0x60; |
| |
| /* due to a hardware quirk with the I2C gate on the stv0367+tda18212 |
| * combo, the tda18212 must be probed by reading it's id _twice_ when |
| * cold started, or it very likely will fail. |
| */ |
| if (porttype == DDB_TUNER_DVBCT_ST) |
| tuner_tda18212_ping(input, addr); |
| |
| /* perform tuner probe/init/attach */ |
| client = dvb_module_probe("tda18212", NULL, adapter, addr, &config); |
| if (!client) |
| goto err; |
| |
| dvb->i2c_client[0] = client; |
| return 0; |
| err: |
| dev_err(dev, "TDA18212 tuner not found. Device is not fully operational.\n"); |
| return -ENODEV; |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static struct stv090x_config stv0900 = { |
| .device = STV0900, |
| .demod_mode = STV090x_DUAL, |
| .clk_mode = STV090x_CLK_EXT, |
| |
| .xtal = 27000000, |
| .address = 0x69, |
| |
| .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| |
| .ts1_tei = 1, |
| .ts2_tei = 1, |
| |
| .repeater_level = STV090x_RPTLEVEL_16, |
| |
| .adc1_range = STV090x_ADC_1Vpp, |
| .adc2_range = STV090x_ADC_1Vpp, |
| |
| .diseqc_envelope_mode = true, |
| }; |
| |
| static struct stv090x_config stv0900_aa = { |
| .device = STV0900, |
| .demod_mode = STV090x_DUAL, |
| .clk_mode = STV090x_CLK_EXT, |
| |
| .xtal = 27000000, |
| .address = 0x68, |
| |
| .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, |
| |
| .ts1_tei = 1, |
| .ts2_tei = 1, |
| |
| .repeater_level = STV090x_RPTLEVEL_16, |
| |
| .adc1_range = STV090x_ADC_1Vpp, |
| .adc2_range = STV090x_ADC_1Vpp, |
| |
| .diseqc_envelope_mode = true, |
| }; |
| |
| static struct stv6110x_config stv6110a = { |
| .addr = 0x60, |
| .refclk = 27000000, |
| .clk_div = 1, |
| }; |
| |
| static struct stv6110x_config stv6110b = { |
| .addr = 0x63, |
| .refclk = 27000000, |
| .clk_div = 1, |
| }; |
| |
| static int demod_attach_stv0900(struct ddb_input *input, int type) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| |
| dvb->fe = dvb_attach(stv090x_attach, feconf, i2c, |
| (input->nr & 1) ? STV090x_DEMODULATOR_1 |
| : STV090x_DEMODULATOR_0); |
| if (!dvb->fe) { |
| dev_err(dev, "No STV0900 found!\n"); |
| return -ENODEV; |
| } |
| if (!dvb_attach(lnbh24_attach, dvb->fe, i2c, 0, |
| 0, (input->nr & 1) ? |
| (0x09 - type) : (0x0b - type))) { |
| dev_err(dev, "No LNBH24 found!\n"); |
| dvb_frontend_detach(dvb->fe); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static int tuner_attach_stv6110(struct ddb_input *input, int type) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; |
| struct stv6110x_config *tunerconf = (input->nr & 1) ? |
| &stv6110b : &stv6110a; |
| const struct stv6110x_devctl *ctl; |
| |
| ctl = dvb_attach(stv6110x_attach, dvb->fe, tunerconf, i2c); |
| if (!ctl) { |
| dev_err(dev, "No STV6110X found!\n"); |
| return -ENODEV; |
| } |
| dev_info(dev, "attach tuner input %d adr %02x\n", |
| input->nr, tunerconf->addr); |
| |
| feconf->tuner_init = ctl->tuner_init; |
| feconf->tuner_sleep = ctl->tuner_sleep; |
| feconf->tuner_set_mode = ctl->tuner_set_mode; |
| feconf->tuner_set_frequency = ctl->tuner_set_frequency; |
| feconf->tuner_get_frequency = ctl->tuner_get_frequency; |
| feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth; |
| feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth; |
| feconf->tuner_set_bbgain = ctl->tuner_set_bbgain; |
| feconf->tuner_get_bbgain = ctl->tuner_get_bbgain; |
| feconf->tuner_set_refclk = ctl->tuner_set_refclk; |
| feconf->tuner_get_status = ctl->tuner_get_status; |
| |
| return 0; |
| } |
| |
| static const struct stv0910_cfg stv0910_p = { |
| .adr = 0x68, |
| .parallel = 1, |
| .rptlvl = 4, |
| .clk = 30000000, |
| .tsspeed = 0x28, |
| }; |
| |
| static const struct lnbh25_config lnbh25_cfg = { |
| .i2c_address = 0x0c << 1, |
| .data2_config = LNBH25_TEN |
| }; |
| |
| static int has_lnbh25(struct i2c_adapter *i2c, u8 adr) |
| { |
| u8 val; |
| |
| return i2c_read_reg(i2c, adr, 0, &val) ? 0 : 1; |
| } |
| |
| static int demod_attach_stv0910(struct ddb_input *input, int type, int tsfast) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| struct stv0910_cfg cfg = stv0910_p; |
| struct lnbh25_config lnbcfg = lnbh25_cfg; |
| |
| if (stv0910_single) |
| cfg.single = 1; |
| |
| if (type) |
| cfg.parallel = 2; |
| |
| if (tsfast) { |
| dev_info(dev, "Enabling stv0910 higher speed TS\n"); |
| cfg.tsspeed = 0x10; |
| } |
| |
| dvb->fe = dvb_attach(stv0910_attach, i2c, &cfg, (input->nr & 1)); |
| if (!dvb->fe) { |
| cfg.adr = 0x6c; |
| dvb->fe = dvb_attach(stv0910_attach, i2c, |
| &cfg, (input->nr & 1)); |
| } |
| if (!dvb->fe) { |
| dev_err(dev, "No STV0910 found!\n"); |
| return -ENODEV; |
| } |
| |
| /* attach lnbh25 - leftshift by one as the lnbh25 driver expects 8bit |
| * i2c addresses |
| */ |
| if (has_lnbh25(i2c, 0x0d)) |
| lnbcfg.i2c_address = (((input->nr & 1) ? 0x0d : 0x0c) << 1); |
| else |
| lnbcfg.i2c_address = (((input->nr & 1) ? 0x09 : 0x08) << 1); |
| |
| if (!dvb_attach(lnbh25_attach, dvb->fe, &lnbcfg, i2c)) { |
| dev_err(dev, "No LNBH25 found!\n"); |
| dvb_frontend_detach(dvb->fe); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int tuner_attach_stv6111(struct ddb_input *input, int type) |
| { |
| struct i2c_adapter *i2c = &input->port->i2c->adap; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| struct dvb_frontend *fe; |
| u8 adr = (type ? 0 : 4) + ((input->nr & 1) ? 0x63 : 0x60); |
| |
| fe = dvb_attach(stv6111_attach, dvb->fe, i2c, adr); |
| if (!fe) { |
| fe = dvb_attach(stv6111_attach, dvb->fe, i2c, adr & ~4); |
| if (!fe) { |
| dev_err(dev, "No STV6111 found at 0x%02x!\n", adr); |
| return -ENODEV; |
| } |
| } |
| return 0; |
| } |
| |
| static int demod_attach_dummy(struct ddb_input *input) |
| { |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct device *dev = input->port->dev->dev; |
| |
| dvb->fe = dvb_attach(ddbridge_dummy_fe_qam_attach); |
| if (!dvb->fe) { |
| dev_err(dev, "QAM dummy attach failed!\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int start_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct dvb_demux *dvbdmx = dvbdmxfeed->demux; |
| struct ddb_input *input = dvbdmx->priv; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| |
| if (!dvb->users) |
| ddb_input_start_all(input); |
| |
| return ++dvb->users; |
| } |
| |
| static int stop_feed(struct dvb_demux_feed *dvbdmxfeed) |
| { |
| struct dvb_demux *dvbdmx = dvbdmxfeed->demux; |
| struct ddb_input *input = dvbdmx->priv; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| |
| if (--dvb->users) |
| return dvb->users; |
| |
| ddb_input_stop_all(input); |
| return 0; |
| } |
| |
| static void dvb_input_detach(struct ddb_input *input) |
| { |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct dvb_demux *dvbdemux = &dvb->demux; |
| |
| switch (dvb->attached) { |
| case 0x31: |
| if (dvb->fe2) |
| dvb_unregister_frontend(dvb->fe2); |
| if (dvb->fe) |
| dvb_unregister_frontend(dvb->fe); |
| fallthrough; |
| case 0x30: |
| dvb_module_release(dvb->i2c_client[0]); |
| dvb->i2c_client[0] = NULL; |
| |
| if (dvb->fe2) |
| dvb_frontend_detach(dvb->fe2); |
| if (dvb->fe) |
| dvb_frontend_detach(dvb->fe); |
| dvb->fe = NULL; |
| dvb->fe2 = NULL; |
| fallthrough; |
| case 0x20: |
| dvb_net_release(&dvb->dvbnet); |
| fallthrough; |
| case 0x12: |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, |
| &dvb->hw_frontend); |
| dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, |
| &dvb->mem_frontend); |
| fallthrough; |
| case 0x11: |
| dvb_dmxdev_release(&dvb->dmxdev); |
| fallthrough; |
| case 0x10: |
| dvb_dmx_release(&dvb->demux); |
| fallthrough; |
| case 0x01: |
| break; |
| } |
| dvb->attached = 0x00; |
| } |
| |
| static int dvb_register_adapters(struct ddb *dev) |
| { |
| int i, ret = 0; |
| struct ddb_port *port; |
| struct dvb_adapter *adap; |
| |
| if (adapter_alloc == 3) { |
| port = &dev->port[0]; |
| adap = port->dvb[0].adap; |
| ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE, |
| port->dev->dev, |
| adapter_nr); |
| if (ret < 0) |
| return ret; |
| port->dvb[0].adap_registered = 1; |
| for (i = 0; i < dev->port_num; i++) { |
| port = &dev->port[i]; |
| port->dvb[0].adap = adap; |
| port->dvb[1].adap = adap; |
| } |
| return 0; |
| } |
| |
| for (i = 0; i < dev->port_num; i++) { |
| port = &dev->port[i]; |
| switch (port->class) { |
| case DDB_PORT_TUNER: |
| adap = port->dvb[0].adap; |
| ret = dvb_register_adapter(adap, "DDBridge", |
| THIS_MODULE, |
| port->dev->dev, |
| adapter_nr); |
| if (ret < 0) |
| return ret; |
| port->dvb[0].adap_registered = 1; |
| |
| if (adapter_alloc > 0) { |
| port->dvb[1].adap = port->dvb[0].adap; |
| break; |
| } |
| adap = port->dvb[1].adap; |
| ret = dvb_register_adapter(adap, "DDBridge", |
| THIS_MODULE, |
| port->dev->dev, |
| adapter_nr); |
| if (ret < 0) |
| return ret; |
| port->dvb[1].adap_registered = 1; |
| break; |
| |
| case DDB_PORT_CI: |
| case DDB_PORT_LOOP: |
| adap = port->dvb[0].adap; |
| ret = dvb_register_adapter(adap, "DDBridge", |
| THIS_MODULE, |
| port->dev->dev, |
| adapter_nr); |
| if (ret < 0) |
| return ret; |
| port->dvb[0].adap_registered = 1; |
| break; |
| default: |
| if (adapter_alloc < 2) |
| break; |
| adap = port->dvb[0].adap; |
| ret = dvb_register_adapter(adap, "DDBridge", |
| THIS_MODULE, |
| port->dev->dev, |
| adapter_nr); |
| if (ret < 0) |
| return ret; |
| port->dvb[0].adap_registered = 1; |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| static void dvb_unregister_adapters(struct ddb *dev) |
| { |
| int i; |
| struct ddb_port *port; |
| struct ddb_dvb *dvb; |
| |
| for (i = 0; i < dev->link[0].info->port_num; i++) { |
| port = &dev->port[i]; |
| |
| dvb = &port->dvb[0]; |
| if (dvb->adap_registered) |
| dvb_unregister_adapter(dvb->adap); |
| dvb->adap_registered = 0; |
| |
| dvb = &port->dvb[1]; |
| if (dvb->adap_registered) |
| dvb_unregister_adapter(dvb->adap); |
| dvb->adap_registered = 0; |
| } |
| } |
| |
| static int dvb_input_attach(struct ddb_input *input) |
| { |
| int ret = 0; |
| struct ddb_dvb *dvb = &input->port->dvb[input->nr & 1]; |
| struct ddb_port *port = input->port; |
| struct dvb_adapter *adap = dvb->adap; |
| struct dvb_demux *dvbdemux = &dvb->demux; |
| struct ddb_ids *devids = &input->port->dev->link[input->port->lnr].ids; |
| int par = 0, osc24 = 0, tsfast = 0; |
| |
| /* |
| * Determine if bridges with stv0910 demods can run with fast TS and |
| * thus support high bandwidth transponders. |
| * STV0910_PR and STV0910_P tuner types covers all relevant bridges, |
| * namely the CineS2 V7(A) and the Octopus CI S2 Pro/Advanced. All |
| * DuoFlex S2 V4(A) have type=DDB_TUNER_DVBS_STV0910 without any suffix |
| * and are limited by the serial link to the bridge, thus won't work |
| * in fast TS mode. |
| */ |
| if (port->nr == 0 && |
| (port->type == DDB_TUNER_DVBS_STV0910_PR || |
| port->type == DDB_TUNER_DVBS_STV0910_P)) { |
| /* fast TS on port 0 requires FPGA version >= 1.7 */ |
| if ((devids->hwid & 0x00ffffff) >= 0x00010007) |
| tsfast = 1; |
| } |
| |
| dvb->attached = 0x01; |
| |
| dvbdemux->priv = input; |
| dvbdemux->dmx.capabilities = DMX_TS_FILTERING | |
| DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING; |
| dvbdemux->start_feed = start_feed; |
| dvbdemux->stop_feed = stop_feed; |
| dvbdemux->filternum = 256; |
| dvbdemux->feednum = 256; |
| ret = dvb_dmx_init(dvbdemux); |
| if (ret < 0) |
| return ret; |
| dvb->attached = 0x10; |
| |
| dvb->dmxdev.filternum = 256; |
| dvb->dmxdev.demux = &dvbdemux->dmx; |
| ret = dvb_dmxdev_init(&dvb->dmxdev, adap); |
| if (ret < 0) |
| goto err_detach; |
| dvb->attached = 0x11; |
| |
| dvb->mem_frontend.source = DMX_MEMORY_FE; |
| dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->mem_frontend); |
| dvb->hw_frontend.source = DMX_FRONTEND_0; |
| dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->hw_frontend); |
| ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &dvb->hw_frontend); |
| if (ret < 0) |
| goto err_detach; |
| dvb->attached = 0x12; |
| |
| ret = dvb_net_init(adap, &dvb->dvbnet, dvb->dmxdev.demux); |
| if (ret < 0) |
| goto err_detach; |
| dvb->attached = 0x20; |
| |
| dvb->fe = NULL; |
| dvb->fe2 = NULL; |
| switch (port->type) { |
| case DDB_TUNER_MXL5XX: |
| if (ddb_fe_attach_mxl5xx(input) < 0) |
| goto err_detach; |
| break; |
| case DDB_TUNER_DVBS_ST: |
| if (demod_attach_stv0900(input, 0) < 0) |
| goto err_detach; |
| if (tuner_attach_stv6110(input, 0) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBS_ST_AA: |
| if (demod_attach_stv0900(input, 1) < 0) |
| goto err_detach; |
| if (tuner_attach_stv6110(input, 1) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBS_STV0910: |
| if (demod_attach_stv0910(input, 0, tsfast) < 0) |
| goto err_detach; |
| if (tuner_attach_stv6111(input, 0) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBS_STV0910_PR: |
| if (demod_attach_stv0910(input, 1, tsfast) < 0) |
| goto err_detach; |
| if (tuner_attach_stv6111(input, 1) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBS_STV0910_P: |
| if (demod_attach_stv0910(input, 0, tsfast) < 0) |
| goto err_detach; |
| if (tuner_attach_stv6111(input, 1) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBCT_TR: |
| if (demod_attach_drxk(input) < 0) |
| goto err_detach; |
| if (tuner_attach_tda18271(input) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBCT_ST: |
| if (demod_attach_stv0367(input) < 0) |
| goto err_detach; |
| if (tuner_attach_tda18212(input, port->type) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBC2T2I_SONY_P: |
| if (input->port->dev->link[input->port->lnr].info->ts_quirks & |
| TS_QUIRK_ALT_OSC) |
| osc24 = 0; |
| else |
| osc24 = 1; |
| fallthrough; |
| case DDB_TUNER_DVBCT2_SONY_P: |
| case DDB_TUNER_DVBC2T2_SONY_P: |
| case DDB_TUNER_ISDBT_SONY_P: |
| if (input->port->dev->link[input->port->lnr].info->ts_quirks |
| & TS_QUIRK_SERIAL) |
| par = 0; |
| else |
| par = 1; |
| if (demod_attach_cxd28xx(input, par, osc24) < 0) |
| goto err_detach; |
| if (tuner_attach_tda18212(input, port->type) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DVBC2T2I_SONY: |
| osc24 = 1; |
| fallthrough; |
| case DDB_TUNER_DVBCT2_SONY: |
| case DDB_TUNER_DVBC2T2_SONY: |
| case DDB_TUNER_ISDBT_SONY: |
| if (demod_attach_cxd28xx(input, 0, osc24) < 0) |
| goto err_detach; |
| if (tuner_attach_tda18212(input, port->type) < 0) |
| goto err_tuner; |
| break; |
| case DDB_TUNER_DUMMY: |
| if (demod_attach_dummy(input) < 0) |
| goto err_detach; |
| break; |
| case DDB_TUNER_MCI_SX8: |
| if (ddb_fe_attach_mci(input, port->type) < 0) |
| goto err_detach; |
| break; |
| default: |
| return 0; |
| } |
| dvb->attached = 0x30; |
| |
| if (dvb->fe) { |
| if (dvb_register_frontend(adap, dvb->fe) < 0) |
| goto err_detach; |
| |
| if (dvb->fe2) { |
| if (dvb_register_frontend(adap, dvb->fe2) < 0) { |
| dvb_unregister_frontend(dvb->fe); |
| goto err_detach; |
| } |
| dvb->fe2->tuner_priv = dvb->fe->tuner_priv; |
| memcpy(&dvb->fe2->ops.tuner_ops, |
| &dvb->fe->ops.tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| } |
| } |
| |
| dvb->attached = 0x31; |
| return 0; |
| |
| err_tuner: |
| dev_err(port->dev->dev, "tuner attach failed!\n"); |
| |
| if (dvb->fe2) |
| dvb_frontend_detach(dvb->fe2); |
| if (dvb->fe) |
| dvb_frontend_detach(dvb->fe); |
| err_detach: |
| dvb_input_detach(input); |
| |
| /* return error from ret if set */ |
| if (ret < 0) |
| return ret; |
| |
| return -ENODEV; |
| } |
| |
| static int port_has_encti(struct ddb_port *port) |
| { |
| struct device *dev = port->dev->dev; |
| u8 val; |
| int ret = i2c_read_reg(&port->i2c->adap, 0x20, 0, &val); |
| |
| if (!ret) |
| dev_info(dev, "[0x20]=0x%02x\n", val); |
| return ret ? 0 : 1; |
| } |
| |
| static int port_has_cxd(struct ddb_port *port, u8 *type) |
| { |
| u8 val; |
| u8 probe[4] = { 0xe0, 0x00, 0x00, 0x00 }, data[4]; |
| struct i2c_msg msgs[2] = {{ .addr = 0x40, .flags = 0, |
| .buf = probe, .len = 4 }, |
| { .addr = 0x40, .flags = I2C_M_RD, |
| .buf = data, .len = 4 } }; |
| val = i2c_transfer(&port->i2c->adap, msgs, 2); |
| if (val != 2) |
| return 0; |
| |
| if (data[0] == 0x02 && data[1] == 0x2b && data[3] == 0x43) |
| *type = 2; |
| else |
| *type = 1; |
| return 1; |
| } |
| |
| static int port_has_xo2(struct ddb_port *port, u8 *type, u8 *id) |
| { |
| u8 probe[1] = { 0x00 }, data[4]; |
| |
| if (i2c_io(&port->i2c->adap, 0x10, probe, 1, data, 4)) |
| return 0; |
| if (data[0] == 'D' && data[1] == 'F') { |
| *id = data[2]; |
| *type = 1; |
| return 1; |
| } |
| if (data[0] == 'C' && data[1] == 'I') { |
| *id = data[2]; |
| *type = 2; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int port_has_stv0900(struct ddb_port *port) |
| { |
| u8 val; |
| |
| if (i2c_read_reg16(&port->i2c->adap, 0x69, 0xf100, &val) < 0) |
| return 0; |
| return 1; |
| } |
| |
| static int port_has_stv0900_aa(struct ddb_port *port, u8 *id) |
| { |
| if (i2c_read_reg16(&port->i2c->adap, 0x68, 0xf100, id) < 0) |
| return 0; |
| return 1; |
| } |
| |
| static int port_has_drxks(struct ddb_port *port) |
| { |
| u8 val; |
| |
| if (i2c_read(&port->i2c->adap, 0x29, &val) < 0) |
| return 0; |
| if (i2c_read(&port->i2c->adap, 0x2a, &val) < 0) |
| return 0; |
| return 1; |
| } |
| |
| static int port_has_stv0367(struct ddb_port *port) |
| { |
| u8 val; |
| |
| if (i2c_read_reg16(&port->i2c->adap, 0x1e, 0xf000, &val) < 0) |
| return 0; |
| if (val != 0x60) |
| return 0; |
| if (i2c_read_reg16(&port->i2c->adap, 0x1f, 0xf000, &val) < 0) |
| return 0; |
| if (val != 0x60) |
| return 0; |
| return 1; |
| } |
| |
| static int init_xo2(struct ddb_port *port) |
| { |
| struct i2c_adapter *i2c = &port->i2c->adap; |
| struct ddb *dev = port->dev; |
| u8 val, data[2]; |
| int res; |
| |
| res = i2c_read_regs(i2c, 0x10, 0x04, data, 2); |
| if (res < 0) |
| return res; |
| |
| if (data[0] != 0x01) { |
| dev_info(dev->dev, "Port %d: invalid XO2\n", port->nr); |
| return -1; |
| } |
| |
| i2c_read_reg(i2c, 0x10, 0x08, &val); |
| if (val != 0) { |
| i2c_write_reg(i2c, 0x10, 0x08, 0x00); |
| msleep(100); |
| } |
| /* Enable tuner power, disable pll, reset demods */ |
| i2c_write_reg(i2c, 0x10, 0x08, 0x04); |
| usleep_range(2000, 3000); |
| /* Release demod resets */ |
| i2c_write_reg(i2c, 0x10, 0x08, 0x07); |
| |
| /* speed: 0=55,1=75,2=90,3=104 MBit/s */ |
| i2c_write_reg(i2c, 0x10, 0x09, xo2_speed); |
| |
| if (dev->link[port->lnr].info->con_clock) { |
| dev_info(dev->dev, "Setting continuous clock for XO2\n"); |
| i2c_write_reg(i2c, 0x10, 0x0a, 0x03); |
| i2c_write_reg(i2c, 0x10, 0x0b, 0x03); |
| } else { |
| i2c_write_reg(i2c, 0x10, 0x0a, 0x01); |
| i2c_write_reg(i2c, 0x10, 0x0b, 0x01); |
| } |
| |
| usleep_range(2000, 3000); |
| /* Start XO2 PLL */ |
| i2c_write_reg(i2c, 0x10, 0x08, 0x87); |
| |
| return 0; |
| } |
| |
| static int init_xo2_ci(struct ddb_port *port) |
| { |
| struct i2c_adapter *i2c = &port->i2c->adap; |
| struct ddb *dev = port->dev; |
| u8 val, data[2]; |
| int res; |
| |
| res = i2c_read_regs(i2c, 0x10, 0x04, data, 2); |
| if (res < 0) |
| return res; |
| |
| if (data[0] > 1) { |
| dev_info(dev->dev, "Port %d: invalid XO2 CI %02x\n", |
| port->nr, data[0]); |
| return -1; |
| } |
| dev_info(dev->dev, "Port %d: DuoFlex CI %u.%u\n", |
| port->nr, data[0], data[1]); |
| |
| i2c_read_reg(i2c, 0x10, 0x08, &val); |
| if (val != 0) { |
| i2c_write_reg(i2c, 0x10, 0x08, 0x00); |
| msleep(100); |
| } |
| /* Enable both CI */ |
| i2c_write_reg(i2c, 0x10, 0x08, 3); |
| usleep_range(2000, 3000); |
| |
| /* speed: 0=55,1=75,2=90,3=104 MBit/s */ |
| i2c_write_reg(i2c, 0x10, 0x09, 1); |
| |
| i2c_write_reg(i2c, 0x10, 0x08, 0x83); |
| usleep_range(2000, 3000); |
| |
| if (dev->link[port->lnr].info->con_clock) { |
| dev_info(dev->dev, "Setting continuous clock for DuoFlex CI\n"); |
| i2c_write_reg(i2c, 0x10, 0x0a, 0x03); |
| i2c_write_reg(i2c, 0x10, 0x0b, 0x03); |
| } else { |
| i2c_write_reg(i2c, 0x10, 0x0a, 0x01); |
| i2c_write_reg(i2c, 0x10, 0x0b, 0x01); |
| } |
| return 0; |
| } |
| |
| static int port_has_cxd28xx(struct ddb_port *port, u8 *id) |
| { |
| struct i2c_adapter *i2c = &port->i2c->adap; |
| int status; |
| |
| status = i2c_write_reg(&port->i2c->adap, 0x6e, 0, 0); |
| if (status) |
| return 0; |
| status = i2c_read_reg(i2c, 0x6e, 0xfd, id); |
| if (status) |
| return 0; |
| return 1; |
| } |
| |
| static char *xo2names[] = { |
| "DUAL DVB-S2", "DUAL DVB-C/T/T2", |
| "DUAL DVB-ISDBT", "DUAL DVB-C/C2/T/T2", |
| "DUAL ATSC", "DUAL DVB-C/C2/T/T2,ISDB-T", |
| "", "" |
| }; |
| |
| static char *xo2types[] = { |
| "DVBS_ST", "DVBCT2_SONY", |
| "ISDBT_SONY", "DVBC2T2_SONY", |
| "ATSC_ST", "DVBC2T2I_SONY" |
| }; |
| |
| static void ddb_port_probe(struct ddb_port *port) |
| { |
| struct ddb *dev = port->dev; |
| u32 l = port->lnr; |
| struct ddb_link *link = &dev->link[l]; |
| u8 id, type; |
| |
| port->name = "NO MODULE"; |
| port->type_name = "NONE"; |
| port->class = DDB_PORT_NONE; |
| |
| /* Handle missing ports and ports without I2C */ |
| |
| if (dummy_tuner && !port->nr && |
| link->ids.device == 0x0005) { |
| port->name = "DUMMY"; |
| port->class = DDB_PORT_TUNER; |
| port->type = DDB_TUNER_DUMMY; |
| port->type_name = "DUMMY"; |
| return; |
| } |
| |
| if (port->nr == ts_loop) { |
| port->name = "TS LOOP"; |
| port->class = DDB_PORT_LOOP; |
| return; |
| } |
| |
| if (port->nr == 1 && link->info->type == DDB_OCTOPUS_CI && |
| link->info->i2c_mask == 1) { |
| port->name = "NO TAB"; |
| port->class = DDB_PORT_NONE; |
| return; |
| } |
| |
| if (link->info->type == DDB_OCTOPUS_MAX) { |
| port->name = "DUAL DVB-S2 MAX"; |
| port->type_name = "MXL5XX"; |
| port->class = DDB_PORT_TUNER; |
| port->type = DDB_TUNER_MXL5XX; |
| if (port->i2c) |
| ddbwritel(dev, I2C_SPEED_400, |
| port->i2c->regs + I2C_TIMING); |
| return; |
| } |
| |
| if (link->info->type == DDB_OCTOPUS_MCI) { |
| if (port->nr >= link->info->mci_ports) |
| return; |
| port->name = "DUAL MCI"; |
| port->type_name = "MCI"; |
| port->class = DDB_PORT_TUNER; |
| port->type = DDB_TUNER_MCI + link->info->mci_type; |
| return; |
| } |
| |
| if (port->nr > 1 && link->info->type == DDB_OCTOPUS_CI) { |
| port->name = "CI internal"; |
| port->type_name = "INTERNAL"; |
| port->class = DDB_PORT_CI; |
| port->type = DDB_CI_INTERNAL; |
| } |
| |
| if (!port->i2c) |
| return; |
| |
| /* Probe ports with I2C */ |
| |
| if (port_has_cxd(port, &id)) { |
| if (id == 1) { |
| port->name = "CI"; |
| port->type_name = "CXD2099"; |
| port->class = DDB_PORT_CI; |
| port->type = DDB_CI_EXTERNAL_SONY; |
| ddbwritel(dev, I2C_SPEED_400, |
| port->i2c->regs + I2C_TIMING); |
| } else { |
| dev_info(dev->dev, "Port %d: Uninitialized DuoFlex\n", |
| port->nr); |
| return; |
| } |
| } else if (port_has_xo2(port, &type, &id)) { |
| ddbwritel(dev, I2C_SPEED_400, port->i2c->regs + I2C_TIMING); |
| /*dev_info(dev->dev, "XO2 ID %02x\n", id);*/ |
| if (type == 2) { |
| port->name = "DuoFlex CI"; |
| port->class = DDB_PORT_CI; |
| port->type = DDB_CI_EXTERNAL_XO2; |
| port->type_name = "CI_XO2"; |
| init_xo2_ci(port); |
| return; |
| } |
| id >>= 2; |
| if (id > 5) { |
| port->name = "unknown XO2 DuoFlex"; |
| port->type_name = "UNKNOWN"; |
| } else { |
| port->name = xo2names[id]; |
| port->class = DDB_PORT_TUNER; |
| port->type = DDB_TUNER_XO2 + id; |
| port->type_name = xo2types[id]; |
| init_xo2(port); |
| } |
| } else if (port_has_cxd28xx(port, &id)) { |
| switch (id) { |
| case 0xa4: |
| port->name = "DUAL DVB-C2T2 CXD2843"; |
| port->type = DDB_TUNER_DVBC2T2_SONY_P; |
| port->type_name = "DVBC2T2_SONY"; |
| break; |
| case 0xb1: |
| port->name = "DUAL DVB-CT2 CXD2837"; |
| port->type = DDB_TUNER_DVBCT2_SONY_P; |
| port->type_name = "DVBCT2_SONY"; |
| break; |
| case 0xb0: |
| port->name = "DUAL ISDB-T CXD2838"; |
| port->type = DDB_TUNER_ISDBT_SONY_P; |
| port->type_name = "ISDBT_SONY"; |
| break; |
| case 0xc1: |
| port->name = "DUAL DVB-C2T2 ISDB-T CXD2854"; |
| port->type = DDB_TUNER_DVBC2T2I_SONY_P; |
| port->type_name = "DVBC2T2I_ISDBT_SONY"; |
| break; |
| default: |
| return; |
| } |
| port->class = DDB_PORT_TUNER; |
| ddbwritel(dev, I2C_SPEED_400, port->i2c->regs + I2C_TIMING); |
| } else if (port_has_stv0900(port)) { |
| port->name = "DUAL DVB-S2"; |
| port->class = DDB_PORT_TUNER; |
| port->type = DDB_TUNER_DVBS_ST; |
| port->type_name = "DVBS_ST"; |
| ddbwritel(dev, I2C_SPEED_100, port->i2c->regs + I2C_TIMING); |
| } else if (port_has_stv0900_aa(port, &id)) { |
| port->name = "DUAL DVB-S2"; |
| port->class = DDB_PORT_TUNER; |
| if (id == 0x51) { |
| if (port->nr == 0 && |
| link->info->ts_quirks & TS_QUIRK_REVERSED) |
| port->type = DDB_TUNER_DVBS_STV0910_PR; |
| else |
| port->type = DDB_TUNER_DVBS_STV0910_P; |
| port->type_name = "DVBS_ST_0910"; |
| } else { |
| port->type = DDB_TUNER_DVBS_ST_AA; |
| port->type_name = "DVBS_ST_AA"; |
| } |
| ddbwritel(dev, I2C_SPEED_100, port->i2c->regs + I2C_TIMING); |
| } else if (port_has_drxks(port)) { |
| port->name = "DUAL DVB-C/T"; |
| port->class = DDB_PORT_TUNER; |
| port->type = DDB_TUNER_DVBCT_TR; |
| port->type_name = "DVBCT_TR"; |
| ddbwritel(dev, I2C_SPEED_400, port->i2c->regs + I2C_TIMING); |
| } else if (port_has_stv0367(port)) { |
| port->name = "DUAL DVB-C/T"; |
| port->class = DDB_PORT_TUNER; |
| port->type = DDB_TUNER_DVBCT_ST; |
| port->type_name = "DVBCT_ST"; |
| ddbwritel(dev, I2C_SPEED_100, port->i2c->regs + I2C_TIMING); |
| } else if (port_has_encti(port)) { |
| port->name = "ENCTI"; |
| port->class = DDB_PORT_LOOP; |
| } |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static int ddb_port_attach(struct ddb_port *port) |
| { |
| int ret = 0; |
| |
| switch (port->class) { |
| case DDB_PORT_TUNER: |
| ret = dvb_input_attach(port->input[0]); |
| if (ret < 0) |
| break; |
| ret = dvb_input_attach(port->input[1]); |
| if (ret < 0) { |
| dvb_input_detach(port->input[0]); |
| break; |
| } |
| port->input[0]->redi = port->input[0]; |
| port->input[1]->redi = port->input[1]; |
| break; |
| case DDB_PORT_CI: |
| ret = ddb_ci_attach(port, ci_bitrate); |
| if (ret < 0) |
| break; |
| fallthrough; |
| case DDB_PORT_LOOP: |
| ret = dvb_register_device(port->dvb[0].adap, |
| &port->dvb[0].dev, |
| &dvbdev_ci, (void *)port->output, |
| DVB_DEVICE_SEC, 0); |
| break; |
| default: |
| break; |
| } |
| if (ret < 0) |
| dev_err(port->dev->dev, "port_attach on port %d failed\n", |
| port->nr); |
| return ret; |
| } |
| |
| int ddb_ports_attach(struct ddb *dev) |
| { |
| int i, numports, err_ports = 0, ret = 0; |
| struct ddb_port *port; |
| |
| if (dev->port_num) { |
| ret = dvb_register_adapters(dev); |
| if (ret < 0) { |
| dev_err(dev->dev, "Registering adapters failed. Check DVB_MAX_ADAPTERS in config.\n"); |
| return ret; |
| } |
| } |
| |
| numports = dev->port_num; |
| |
| for (i = 0; i < dev->port_num; i++) { |
| port = &dev->port[i]; |
| if (port->class != DDB_PORT_NONE) { |
| ret = ddb_port_attach(port); |
| if (ret) |
| err_ports++; |
| } else { |
| numports--; |
| } |
| } |
| |
| if (err_ports) { |
| if (err_ports == numports) { |
| dev_err(dev->dev, "All connected ports failed to initialise!\n"); |
| return -ENODEV; |
| } |
| |
| dev_warn(dev->dev, "%d of %d connected ports failed to initialise!\n", |
| err_ports, numports); |
| } |
| |
| return 0; |
| } |
| |
| void ddb_ports_detach(struct ddb *dev) |
| { |
| int i; |
| struct ddb_port *port; |
| |
| for (i = 0; i < dev->port_num; i++) { |
| port = &dev->port[i]; |
| |
| switch (port->class) { |
| case DDB_PORT_TUNER: |
| dvb_input_detach(port->input[1]); |
| dvb_input_detach(port->input[0]); |
| break; |
| case DDB_PORT_CI: |
| case DDB_PORT_LOOP: |
| ddb_ci_detach(port); |
| break; |
| } |
| } |
| dvb_unregister_adapters(dev); |
| } |
| |
| /* Copy input DMA pointers to output DMA and ACK. */ |
| |
| static void input_write_output(struct ddb_input *input, |
| struct ddb_output *output) |
| { |
| ddbwritel(output->port->dev, |
| input->dma->stat, DMA_BUFFER_ACK(output->dma)); |
| output->dma->cbuf = (input->dma->stat >> 11) & 0x1f; |
| output->dma->coff = (input->dma->stat & 0x7ff) << 7; |
| } |
| |
| static void output_ack_input(struct ddb_output *output, |
| struct ddb_input *input) |
| { |
| ddbwritel(input->port->dev, |
| output->dma->stat, DMA_BUFFER_ACK(input->dma)); |
| } |
| |
| static void input_write_dvb(struct ddb_input *input, |
| struct ddb_input *input2) |
| { |
| struct ddb_dvb *dvb = &input2->port->dvb[input2->nr & 1]; |
| struct ddb_dma *dma, *dma2; |
| struct ddb *dev = input->port->dev; |
| int ack = 1; |
| |
| dma = input->dma; |
| dma2 = input->dma; |
| /* |
| * if there also is an output connected, do not ACK. |
| * input_write_output will ACK. |
| */ |
| if (input->redo) { |
| dma2 = input->redo->dma; |
| ack = 0; |
| } |
| while (dma->cbuf != ((dma->stat >> 11) & 0x1f) || |
| (4 & dma->ctrl)) { |
| if (4 & dma->ctrl) { |
| /* dev_err(dev->dev, "Overflow dma %d\n", dma->nr); */ |
| ack = 1; |
| } |
| if (alt_dma) |
| dma_sync_single_for_cpu(dev->dev, dma2->pbuf[dma->cbuf], |
| dma2->size, DMA_FROM_DEVICE); |
| dvb_dmx_swfilter_packets(&dvb->demux, |
| dma2->vbuf[dma->cbuf], |
| dma2->size / 188); |
| dma->cbuf = (dma->cbuf + 1) % dma2->num; |
| if (ack) |
| ddbwritel(dev, (dma->cbuf << 11), |
| DMA_BUFFER_ACK(dma)); |
| dma->stat = safe_ddbreadl(dev, DMA_BUFFER_CURRENT(dma)); |
| dma->ctrl = safe_ddbreadl(dev, DMA_BUFFER_CONTROL(dma)); |
| } |
| } |
| |
| static void input_work(struct work_struct *work) |
| { |
| struct ddb_dma *dma = container_of(work, struct ddb_dma, work); |
| struct ddb_input *input = (struct ddb_input *)dma->io; |
| struct ddb *dev = input->port->dev; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dma->lock, flags); |
| if (!dma->running) { |
| spin_unlock_irqrestore(&dma->lock, flags); |
| return; |
| } |
| dma->stat = ddbreadl(dev, DMA_BUFFER_CURRENT(dma)); |
| dma->ctrl = ddbreadl(dev, DMA_BUFFER_CONTROL(dma)); |
| |
| if (input->redi) |
| input_write_dvb(input, input->redi); |
| if (input->redo) |
| input_write_output(input, input->redo); |
| wake_up(&dma->wq); |
| spin_unlock_irqrestore(&dma->lock, flags); |
| } |
| |
| static void input_handler(void *data) |
| { |
| struct ddb_input *input = (struct ddb_input *)data; |
| struct ddb_dma *dma = input->dma; |
| |
| queue_work(ddb_wq, &dma->work); |
| } |
| |
| static void output_work(struct work_struct *work) |
| { |
| struct ddb_dma *dma = container_of(work, struct ddb_dma, work); |
| struct ddb_output *output = (struct ddb_output *)dma->io; |
| struct ddb *dev = output->port->dev; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dma->lock, flags); |
| if (!dma->running) |
| goto unlock_exit; |
| dma->stat = ddbreadl(dev, DMA_BUFFER_CURRENT(dma)); |
| dma->ctrl = ddbreadl(dev, DMA_BUFFER_CONTROL(dma)); |
| if (output->redi) |
| output_ack_input(output, output->redi); |
| wake_up(&dma->wq); |
| unlock_exit: |
| spin_unlock_irqrestore(&dma->lock, flags); |
| } |
| |
| static void output_handler(void *data) |
| { |
| struct ddb_output *output = (struct ddb_output *)data; |
| struct ddb_dma *dma = output->dma; |
| |
| queue_work(ddb_wq, &dma->work); |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static const struct ddb_regmap *io_regmap(struct ddb_io *io, int link) |
| { |
| const struct ddb_info *info; |
| |
| if (link) |
| info = io->port->dev->link[io->port->lnr].info; |
| else |
| info = io->port->dev->link[0].info; |
| |
| if (!info) |
| return NULL; |
| |
| return info->regmap; |
| } |
| |
| static void ddb_dma_init(struct ddb_io *io, int nr, int out) |
| { |
| struct ddb_dma *dma; |
| const struct ddb_regmap *rm = io_regmap(io, 0); |
| |
| dma = out ? &io->port->dev->odma[nr] : &io->port->dev->idma[nr]; |
| io->dma = dma; |
| dma->io = io; |
| |
| spin_lock_init(&dma->lock); |
| init_waitqueue_head(&dma->wq); |
| if (out) { |
| INIT_WORK(&dma->work, output_work); |
| dma->regs = rm->odma->base + rm->odma->size * nr; |
| dma->bufregs = rm->odma_buf->base + rm->odma_buf->size * nr; |
| dma->num = dma_buf_num; |
| dma->size = dma_buf_size * 128 * 47; |
| dma->div = 1; |
| } else { |
| INIT_WORK(&dma->work, input_work); |
| dma->regs = rm->idma->base + rm->idma->size * nr; |
| dma->bufregs = rm->idma_buf->base + rm->idma_buf->size * nr; |
| dma->num = dma_buf_num; |
| dma->size = dma_buf_size * 128 * 47; |
| dma->div = 1; |
| } |
| ddbwritel(io->port->dev, 0, DMA_BUFFER_ACK(dma)); |
| dev_dbg(io->port->dev->dev, "init link %u, io %u, dma %u, dmaregs %08x bufregs %08x\n", |
| io->port->lnr, io->nr, nr, dma->regs, dma->bufregs); |
| } |
| |
| static void ddb_input_init(struct ddb_port *port, int nr, int pnr, int anr) |
| { |
| struct ddb *dev = port->dev; |
| struct ddb_input *input = &dev->input[anr]; |
| const struct ddb_regmap *rm; |
| |
| port->input[pnr] = input; |
| input->nr = nr; |
| input->port = port; |
| rm = io_regmap(input, 1); |
| input->regs = DDB_LINK_TAG(port->lnr) | |
| (rm->input->base + rm->input->size * nr); |
| dev_dbg(dev->dev, "init link %u, input %u, regs %08x\n", |
| port->lnr, nr, input->regs); |
| |
| if (dev->has_dma) { |
| const struct ddb_regmap *rm0 = io_regmap(input, 0); |
| u32 base = rm0->irq_base_idma; |
| u32 dma_nr = nr; |
| |
| if (port->lnr) |
| dma_nr += 32 + (port->lnr - 1) * 8; |
| |
| dev_dbg(dev->dev, "init link %u, input %u, handler %u\n", |
| port->lnr, nr, dma_nr + base); |
| |
| ddb_irq_set(dev, 0, dma_nr + base, &input_handler, input); |
| ddb_dma_init(input, dma_nr, 0); |
| } |
| } |
| |
| static void ddb_output_init(struct ddb_port *port, int nr) |
| { |
| struct ddb *dev = port->dev; |
| struct ddb_output *output = &dev->output[nr]; |
| const struct ddb_regmap *rm; |
| |
| port->output = output; |
| output->nr = nr; |
| output->port = port; |
| rm = io_regmap(output, 1); |
| output->regs = DDB_LINK_TAG(port->lnr) | |
| (rm->output->base + rm->output->size * nr); |
| |
| dev_dbg(dev->dev, "init link %u, output %u, regs %08x\n", |
| port->lnr, nr, output->regs); |
| |
| if (dev->has_dma) { |
| const struct ddb_regmap *rm0 = io_regmap(output, 0); |
| u32 base = rm0->irq_base_odma; |
| |
| ddb_irq_set(dev, 0, nr + base, &output_handler, output); |
| ddb_dma_init(output, nr, 1); |
| } |
| } |
| |
| static int ddb_port_match_i2c(struct ddb_port *port) |
| { |
| struct ddb *dev = port->dev; |
| u32 i; |
| |
| for (i = 0; i < dev->i2c_num; i++) { |
| if (dev->i2c[i].link == port->lnr && |
| dev->i2c[i].nr == port->nr) { |
| port->i2c = &dev->i2c[i]; |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static int ddb_port_match_link_i2c(struct ddb_port *port) |
| { |
| struct ddb *dev = port->dev; |
| u32 i; |
| |
| for (i = 0; i < dev->i2c_num; i++) { |
| if (dev->i2c[i].link == port->lnr) { |
| port->i2c = &dev->i2c[i]; |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| void ddb_ports_init(struct ddb *dev) |
| { |
| u32 i, l, p; |
| struct ddb_port *port; |
| const struct ddb_info *info; |
| const struct ddb_regmap *rm; |
| |
| for (p = l = 0; l < DDB_MAX_LINK; l++) { |
| info = dev->link[l].info; |
| if (!info) |
| continue; |
| rm = info->regmap; |
| if (!rm) |
| continue; |
| for (i = 0; i < info->port_num; i++, p++) { |
| port = &dev->port[p]; |
| port->dev = dev; |
| port->nr = i; |
| port->lnr = l; |
| port->pnr = p; |
| port->gap = 0xffffffff; |
| port->obr = ci_bitrate; |
| mutex_init(&port->i2c_gate_lock); |
| |
| if (!ddb_port_match_i2c(port)) { |
| if (info->type == DDB_OCTOPUS_MAX) |
| ddb_port_match_link_i2c(port); |
| } |
| |
| ddb_port_probe(port); |
| |
| port->dvb[0].adap = &dev->adap[2 * p]; |
| port->dvb[1].adap = &dev->adap[2 * p + 1]; |
| |
| if (port->class == DDB_PORT_NONE && i && p && |
| dev->port[p - 1].type == DDB_CI_EXTERNAL_XO2) { |
| port->class = DDB_PORT_CI; |
| port->type = DDB_CI_EXTERNAL_XO2_B; |
| port->name = "DuoFlex CI_B"; |
| port->i2c = dev->port[p - 1].i2c; |
| } |
| |
| dev_info(dev->dev, "Port %u: Link %u, Link Port %u (TAB %u): %s\n", |
| port->pnr, port->lnr, port->nr, port->nr + 1, |
| port->name); |
| |
| if (port->class == DDB_PORT_CI && |
| port->type == DDB_CI_EXTERNAL_XO2) { |
| ddb_input_init(port, 2 * i, 0, 2 * i); |
| ddb_output_init(port, i); |
| continue; |
| } |
| |
| if (port->class == DDB_PORT_CI && |
| port->type == DDB_CI_EXTERNAL_XO2_B) { |
| ddb_input_init(port, 2 * i - 1, 0, 2 * i - 1); |
| ddb_output_init(port, i); |
| continue; |
| } |
| |
| if (port->class == DDB_PORT_NONE) |
| continue; |
| |
| switch (dev->link[l].info->type) { |
| case DDB_OCTOPUS_CI: |
| if (i >= 2) { |
| ddb_input_init(port, 2 + i, 0, 2 + i); |
| ddb_input_init(port, 4 + i, 1, 4 + i); |
| ddb_output_init(port, i); |
| break; |
| } |
| fallthrough; |
| case DDB_OCTOPUS: |
| ddb_input_init(port, 2 * i, 0, 2 * i); |
| ddb_input_init(port, 2 * i + 1, 1, 2 * i + 1); |
| ddb_output_init(port, i); |
| break; |
| case DDB_OCTOPUS_MAX: |
| case DDB_OCTOPUS_MAX_CT: |
| case DDB_OCTOPUS_MCI: |
| ddb_input_init(port, 2 * i, 0, 2 * p); |
| ddb_input_init(port, 2 * i + 1, 1, 2 * p + 1); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| dev->port_num = p; |
| } |
| |
| void ddb_ports_release(struct ddb *dev) |
| { |
| int i; |
| struct ddb_port *port; |
| |
| for (i = 0; i < dev->port_num; i++) { |
| port = &dev->port[i]; |
| if (port->input[0] && port->input[0]->dma) |
| cancel_work_sync(&port->input[0]->dma->work); |
| if (port->input[1] && port->input[1]->dma) |
| cancel_work_sync(&port->input[1]->dma->work); |
| if (port->output && port->output->dma) |
| cancel_work_sync(&port->output->dma->work); |
| } |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| #define IRQ_HANDLE(_nr) \ |
| do { if ((s & (1UL << ((_nr) & 0x1f))) && \ |
| dev->link[0].irq[_nr].handler) \ |
| dev->link[0].irq[_nr].handler(dev->link[0].irq[_nr].data); } \ |
| while (0) |
| |
| #define IRQ_HANDLE_NIBBLE(_shift) { \ |
| if (s & (0x0000000f << ((_shift) & 0x1f))) { \ |
| IRQ_HANDLE(0 + (_shift)); \ |
| IRQ_HANDLE(1 + (_shift)); \ |
| IRQ_HANDLE(2 + (_shift)); \ |
| IRQ_HANDLE(3 + (_shift)); \ |
| } \ |
| } |
| |
| #define IRQ_HANDLE_BYTE(_shift) { \ |
| if (s & (0x000000ff << ((_shift) & 0x1f))) { \ |
| IRQ_HANDLE(0 + (_shift)); \ |
| IRQ_HANDLE(1 + (_shift)); \ |
| IRQ_HANDLE(2 + (_shift)); \ |
| IRQ_HANDLE(3 + (_shift)); \ |
| IRQ_HANDLE(4 + (_shift)); \ |
| IRQ_HANDLE(5 + (_shift)); \ |
| IRQ_HANDLE(6 + (_shift)); \ |
| IRQ_HANDLE(7 + (_shift)); \ |
| } \ |
| } |
| |
| static void irq_handle_msg(struct ddb *dev, u32 s) |
| { |
| dev->i2c_irq++; |
| IRQ_HANDLE_NIBBLE(0); |
| } |
| |
| static void irq_handle_io(struct ddb *dev, u32 s) |
| { |
| dev->ts_irq++; |
| IRQ_HANDLE_NIBBLE(4); |
| IRQ_HANDLE_BYTE(8); |
| IRQ_HANDLE_BYTE(16); |
| IRQ_HANDLE_BYTE(24); |
| } |
| |
| irqreturn_t ddb_irq_handler0(int irq, void *dev_id) |
| { |
| struct ddb *dev = (struct ddb *)dev_id; |
| u32 mask = 0x8fffff00; |
| u32 s = mask & ddbreadl(dev, INTERRUPT_STATUS); |
| |
| if (!s) |
| return IRQ_NONE; |
| do { |
| if (s & 0x80000000) |
| return IRQ_NONE; |
| ddbwritel(dev, s, INTERRUPT_ACK); |
| irq_handle_io(dev, s); |
| } while ((s = mask & ddbreadl(dev, INTERRUPT_STATUS))); |
| |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t ddb_irq_handler1(int irq, void *dev_id) |
| { |
| struct ddb *dev = (struct ddb *)dev_id; |
| u32 mask = 0x8000000f; |
| u32 s = mask & ddbreadl(dev, INTERRUPT_STATUS); |
| |
| if (!s) |
| return IRQ_NONE; |
| do { |
| if (s & 0x80000000) |
| return IRQ_NONE; |
| ddbwritel(dev, s, INTERRUPT_ACK); |
| irq_handle_msg(dev, s); |
| } while ((s = mask & ddbreadl(dev, INTERRUPT_STATUS))); |
| |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t ddb_irq_handler(int irq, void *dev_id) |
| { |
| struct ddb *dev = (struct ddb *)dev_id; |
| u32 s = ddbreadl(dev, INTERRUPT_STATUS); |
| int ret = IRQ_HANDLED; |
| |
| if (!s) |
| return IRQ_NONE; |
| do { |
| if (s & 0x80000000) |
| return IRQ_NONE; |
| ddbwritel(dev, s, INTERRUPT_ACK); |
| |
| if (s & 0x0000000f) |
| irq_handle_msg(dev, s); |
| if (s & 0x0fffff00) |
| irq_handle_io(dev, s); |
| } while ((s = ddbreadl(dev, INTERRUPT_STATUS))); |
| |
| return ret; |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static int reg_wait(struct ddb *dev, u32 reg, u32 bit) |
| { |
| u32 count = 0; |
| |
| while (safe_ddbreadl(dev, reg) & bit) { |
| ndelay(10); |
| if (++count == 100) |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int flashio(struct ddb *dev, u32 lnr, u8 *wbuf, u32 wlen, u8 *rbuf, |
| u32 rlen) |
| { |
| u32 data, shift; |
| u32 tag = DDB_LINK_TAG(lnr); |
| struct ddb_link *link = &dev->link[lnr]; |
| |
| mutex_lock(&link->flash_mutex); |
| if (wlen > 4) |
| ddbwritel(dev, 1, tag | SPI_CONTROL); |
| while (wlen > 4) { |
| /* FIXME: check for big-endian */ |
| data = swab32(*(u32 *)wbuf); |
| wbuf += 4; |
| wlen -= 4; |
| ddbwritel(dev, data, tag | SPI_DATA); |
| if (reg_wait(dev, tag | SPI_CONTROL, 4)) |
| goto fail; |
| } |
| if (rlen) |
| ddbwritel(dev, 0x0001 | ((wlen << (8 + 3)) & 0x1f00), |
| tag | SPI_CONTROL); |
| else |
| ddbwritel(dev, 0x0003 | ((wlen << (8 + 3)) & 0x1f00), |
| tag | SPI_CONTROL); |
| |
| data = 0; |
| shift = ((4 - wlen) * 8); |
| while (wlen) { |
| data <<= 8; |
| data |= *wbuf; |
| wlen--; |
| wbuf++; |
| } |
| if (shift) |
| data <<= shift; |
| ddbwritel(dev, data, tag | SPI_DATA); |
| if (reg_wait(dev, tag | SPI_CONTROL, 4)) |
| goto fail; |
| |
| if (!rlen) { |
| ddbwritel(dev, 0, tag | SPI_CONTROL); |
| goto exit; |
| } |
| if (rlen > 4) |
| ddbwritel(dev, 1, tag | SPI_CONTROL); |
| |
| while (rlen > 4) { |
| ddbwritel(dev, 0xffffffff, tag | SPI_DATA); |
| if (reg_wait(dev, tag | SPI_CONTROL, 4)) |
| goto fail; |
| data = ddbreadl(dev, tag | SPI_DATA); |
| *(u32 *)rbuf = swab32(data); |
| rbuf += 4; |
| rlen -= 4; |
| } |
| ddbwritel(dev, 0x0003 | ((rlen << (8 + 3)) & 0x1F00), |
| tag | SPI_CONTROL); |
| ddbwritel(dev, 0xffffffff, tag | SPI_DATA); |
| if (reg_wait(dev, tag | SPI_CONTROL, 4)) |
| goto fail; |
| |
| data = ddbreadl(dev, tag | SPI_DATA); |
| ddbwritel(dev, 0, tag | SPI_CONTROL); |
| |
| if (rlen < 4) |
| data <<= ((4 - rlen) * 8); |
| |
| while (rlen > 0) { |
| *rbuf = ((data >> 24) & 0xff); |
| data <<= 8; |
| rbuf++; |
| rlen--; |
| } |
| exit: |
| mutex_unlock(&link->flash_mutex); |
| return 0; |
| fail: |
| mutex_unlock(&link->flash_mutex); |
| return -1; |
| } |
| |
| int ddbridge_flashread(struct ddb *dev, u32 link, u8 *buf, u32 addr, u32 len) |
| { |
| u8 cmd[4] = {0x03, (addr >> 16) & 0xff, |
| (addr >> 8) & 0xff, addr & 0xff}; |
| |
| return flashio(dev, link, cmd, 4, buf, len); |
| } |
| |
| /* |
| * TODO/FIXME: add/implement IOCTLs from upstream driver |
| */ |
| |
| #define DDB_NAME "ddbridge" |
| |
| static u32 ddb_num; |
| static int ddb_major; |
| static DEFINE_MUTEX(ddb_mutex); |
| |
| static int ddb_release(struct inode *inode, struct file *file) |
| { |
| struct ddb *dev = file->private_data; |
| |
| dev->ddb_dev_users--; |
| return 0; |
| } |
| |
| static int ddb_open(struct inode *inode, struct file *file) |
| { |
| struct ddb *dev = ddbs[iminor(inode)]; |
| |
| if (dev->ddb_dev_users) |
| return -EBUSY; |
| dev->ddb_dev_users++; |
| file->private_data = dev; |
| return 0; |
| } |
| |
| static long ddb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct ddb *dev = file->private_data; |
| |
| dev_warn(dev->dev, "DDB IOCTLs unsupported (cmd: %d, arg: %lu)\n", |
| cmd, arg); |
| |
| return -ENOTTY; |
| } |
| |
| static const struct file_operations ddb_fops = { |
| .unlocked_ioctl = ddb_ioctl, |
| .open = ddb_open, |
| .release = ddb_release, |
| }; |
| |
| static char *ddb_devnode(const struct device *device, umode_t *mode) |
| { |
| const struct ddb *dev = dev_get_drvdata(device); |
| |
| return kasprintf(GFP_KERNEL, "ddbridge/card%d", dev->nr); |
| } |
| |
| #define __ATTR_MRO(_name, _show) { \ |
| .attr = { .name = __stringify(_name), .mode = 0444 }, \ |
| .show = _show, \ |
| } |
| |
| #define __ATTR_MWO(_name, _store) { \ |
| .attr = { .name = __stringify(_name), .mode = 0222 }, \ |
| .store = _store, \ |
| } |
| |
| static ssize_t ports_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "%d\n", dev->port_num); |
| } |
| |
| static ssize_t ts_irq_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "%d\n", dev->ts_irq); |
| } |
| |
| static ssize_t i2c_irq_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "%d\n", dev->i2c_irq); |
| } |
| |
| static ssize_t fan_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| u32 val; |
| |
| val = ddbreadl(dev, GPIO_OUTPUT) & 1; |
| return sprintf(buf, "%d\n", val); |
| } |
| |
| static ssize_t fan_store(struct device *device, struct device_attribute *d, |
| const char *buf, size_t count) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| u32 val; |
| |
| if (sscanf(buf, "%u\n", &val) != 1) |
| return -EINVAL; |
| ddbwritel(dev, 1, GPIO_DIRECTION); |
| ddbwritel(dev, val & 1, GPIO_OUTPUT); |
| return count; |
| } |
| |
| static ssize_t fanspeed_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| int num = attr->attr.name[8] - 0x30; |
| struct ddb_link *link = &dev->link[num]; |
| u32 spd; |
| |
| spd = ddblreadl(link, TEMPMON_FANCONTROL) & 0xff; |
| return sprintf(buf, "%u\n", spd * 100); |
| } |
| |
| static ssize_t temp_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| struct ddb_link *link = &dev->link[0]; |
| struct i2c_adapter *adap; |
| int temp, temp2; |
| u8 tmp[2]; |
| |
| if (!link->info->temp_num) |
| return sprintf(buf, "no sensor\n"); |
| adap = &dev->i2c[link->info->temp_bus].adap; |
| if (i2c_read_regs(adap, 0x48, 0, tmp, 2) < 0) |
| return sprintf(buf, "read_error\n"); |
| temp = (tmp[0] << 3) | (tmp[1] >> 5); |
| temp *= 125; |
| if (link->info->temp_num == 2) { |
| if (i2c_read_regs(adap, 0x49, 0, tmp, 2) < 0) |
| return sprintf(buf, "read_error\n"); |
| temp2 = (tmp[0] << 3) | (tmp[1] >> 5); |
| temp2 *= 125; |
| return sprintf(buf, "%d %d\n", temp, temp2); |
| } |
| return sprintf(buf, "%d\n", temp); |
| } |
| |
| static ssize_t ctemp_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| struct i2c_adapter *adap; |
| int temp; |
| u8 tmp[2]; |
| int num = attr->attr.name[4] - 0x30; |
| |
| adap = &dev->i2c[num].adap; |
| if (!adap) |
| return 0; |
| if (i2c_read_regs(adap, 0x49, 0, tmp, 2) < 0) |
| if (i2c_read_regs(adap, 0x4d, 0, tmp, 2) < 0) |
| return sprintf(buf, "no sensor\n"); |
| temp = tmp[0] * 1000; |
| return sprintf(buf, "%d\n", temp); |
| } |
| |
| static ssize_t led_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| int num = attr->attr.name[3] - 0x30; |
| |
| return sprintf(buf, "%d\n", dev->leds & (1 << num) ? 1 : 0); |
| } |
| |
| static void ddb_set_led(struct ddb *dev, int num, int val) |
| { |
| if (!dev->link[0].info->led_num) |
| return; |
| switch (dev->port[num].class) { |
| case DDB_PORT_TUNER: |
| switch (dev->port[num].type) { |
| case DDB_TUNER_DVBS_ST: |
| i2c_write_reg16(&dev->i2c[num].adap, |
| 0x69, 0xf14c, val ? 2 : 0); |
| break; |
| case DDB_TUNER_DVBCT_ST: |
| i2c_write_reg16(&dev->i2c[num].adap, |
| 0x1f, 0xf00e, 0); |
| i2c_write_reg16(&dev->i2c[num].adap, |
| 0x1f, 0xf00f, val ? 1 : 0); |
| break; |
| case DDB_TUNER_XO2 ... DDB_TUNER_DVBC2T2I_SONY: |
| { |
| u8 v; |
| |
| i2c_read_reg(&dev->i2c[num].adap, 0x10, 0x08, &v); |
| v = (v & ~0x10) | (val ? 0x10 : 0); |
| i2c_write_reg(&dev->i2c[num].adap, 0x10, 0x08, v); |
| break; |
| } |
| default: |
| break; |
| } |
| break; |
| } |
| } |
| |
| static ssize_t led_store(struct device *device, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| int num = attr->attr.name[3] - 0x30; |
| u32 val; |
| |
| if (sscanf(buf, "%u\n", &val) != 1) |
| return -EINVAL; |
| if (val) |
| dev->leds |= (1 << num); |
| else |
| dev->leds &= ~(1 << num); |
| ddb_set_led(dev, num, val); |
| return count; |
| } |
| |
| static ssize_t snr_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| char snr[32]; |
| int num = attr->attr.name[3] - 0x30; |
| |
| if (dev->port[num].type >= DDB_TUNER_XO2) { |
| if (i2c_read_regs(&dev->i2c[num].adap, 0x10, 0x10, snr, 16) < 0) |
| return sprintf(buf, "NO SNR\n"); |
| snr[16] = 0; |
| } else { |
| /* serial number at 0x100-0x11f */ |
| if (i2c_read_regs16(&dev->i2c[num].adap, |
| 0x57, 0x100, snr, 32) < 0) |
| if (i2c_read_regs16(&dev->i2c[num].adap, |
| 0x50, 0x100, snr, 32) < 0) |
| return sprintf(buf, "NO SNR\n"); |
| snr[31] = 0; /* in case it is not terminated on EEPROM */ |
| } |
| return sprintf(buf, "%s\n", snr); |
| } |
| |
| static ssize_t bsnr_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| char snr[16]; |
| |
| ddbridge_flashread(dev, 0, snr, 0x10, 15); |
| snr[15] = 0; /* in case it is not terminated on EEPROM */ |
| return sprintf(buf, "%s\n", snr); |
| } |
| |
| static ssize_t bpsnr_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| unsigned char snr[32]; |
| |
| if (!dev->i2c_num) |
| return 0; |
| |
| if (i2c_read_regs16(&dev->i2c[0].adap, |
| 0x50, 0x0000, snr, 32) < 0 || |
| snr[0] == 0xff) |
| return sprintf(buf, "NO SNR\n"); |
| snr[31] = 0; /* in case it is not terminated on EEPROM */ |
| return sprintf(buf, "%s\n", snr); |
| } |
| |
| static ssize_t redirect_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| return 0; |
| } |
| |
| static ssize_t redirect_store(struct device *device, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| unsigned int i, p; |
| int res; |
| |
| if (sscanf(buf, "%x %x\n", &i, &p) != 2) |
| return -EINVAL; |
| res = ddb_redirect(i, p); |
| if (res < 0) |
| return res; |
| dev_info(device, "redirect: %02x, %02x\n", i, p); |
| return count; |
| } |
| |
| static ssize_t gap_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| int num = attr->attr.name[3] - 0x30; |
| |
| return sprintf(buf, "%d\n", dev->port[num].gap); |
| } |
| |
| static ssize_t gap_store(struct device *device, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| int num = attr->attr.name[3] - 0x30; |
| unsigned int val; |
| |
| if (sscanf(buf, "%u\n", &val) != 1) |
| return -EINVAL; |
| if (val > 128) |
| return -EINVAL; |
| if (val == 128) |
| val = 0xffffffff; |
| dev->port[num].gap = val; |
| return count; |
| } |
| |
| static ssize_t version_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "%08x %08x\n", |
| dev->link[0].ids.hwid, dev->link[0].ids.regmapid); |
| } |
| |
| static ssize_t hwid_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "0x%08X\n", dev->link[0].ids.hwid); |
| } |
| |
| static ssize_t regmap_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "0x%08X\n", dev->link[0].ids.regmapid); |
| } |
| |
| static ssize_t fmode_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| int num = attr->attr.name[5] - 0x30; |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "%u\n", dev->link[num].lnb.fmode); |
| } |
| |
| static ssize_t devid_show(struct device *device, |
| struct device_attribute *attr, char *buf) |
| { |
| int num = attr->attr.name[5] - 0x30; |
| struct ddb *dev = dev_get_drvdata(device); |
| |
| return sprintf(buf, "%08x\n", dev->link[num].ids.devid); |
| } |
| |
| static ssize_t fmode_store(struct device *device, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ddb *dev = dev_get_drvdata(device); |
| int num = attr->attr.name[5] - 0x30; |
| unsigned int val; |
| |
| if (sscanf(buf, "%u\n", &val) != 1) |
| return -EINVAL; |
| if (val > 3) |
| return -EINVAL; |
| ddb_lnb_init_fmode(dev, &dev->link[num], val); |
| return count; |
| } |
| |
| static struct device_attribute ddb_attrs[] = { |
| __ATTR_RO(version), |
| __ATTR_RO(ports), |
| __ATTR_RO(ts_irq), |
| __ATTR_RO(i2c_irq), |
| __ATTR(gap0, 0664, gap_show, gap_store), |
| __ATTR(gap1, 0664, gap_show, gap_store), |
| __ATTR(gap2, 0664, gap_show, gap_store), |
| __ATTR(gap3, 0664, gap_show, gap_store), |
| __ATTR(fmode0, 0664, fmode_show, fmode_store), |
| __ATTR(fmode1, 0664, fmode_show, fmode_store), |
| __ATTR(fmode2, 0664, fmode_show, fmode_store), |
| __ATTR(fmode3, 0664, fmode_show, fmode_store), |
| __ATTR_MRO(devid0, devid_show), |
| __ATTR_MRO(devid1, devid_show), |
| __ATTR_MRO(devid2, devid_show), |
| __ATTR_MRO(devid3, devid_show), |
| __ATTR_RO(hwid), |
| __ATTR_RO(regmap), |
| __ATTR(redirect, 0664, redirect_show, redirect_store), |
| __ATTR_MRO(snr, bsnr_show), |
| __ATTR_RO(bpsnr), |
| __ATTR_NULL, |
| }; |
| |
| static struct device_attribute ddb_attrs_temp[] = { |
| __ATTR_RO(temp), |
| }; |
| |
| static struct device_attribute ddb_attrs_fan[] = { |
| __ATTR(fan, 0664, fan_show, fan_store), |
| }; |
| |
| static struct device_attribute ddb_attrs_snr[] = { |
| __ATTR_MRO(snr0, snr_show), |
| __ATTR_MRO(snr1, snr_show), |
| __ATTR_MRO(snr2, snr_show), |
| __ATTR_MRO(snr3, snr_show), |
| }; |
| |
| static struct device_attribute ddb_attrs_ctemp[] = { |
| __ATTR_MRO(temp0, ctemp_show), |
| __ATTR_MRO(temp1, ctemp_show), |
| __ATTR_MRO(temp2, ctemp_show), |
| __ATTR_MRO(temp3, ctemp_show), |
| }; |
| |
| static struct device_attribute ddb_attrs_led[] = { |
| __ATTR(led0, 0664, led_show, led_store), |
| __ATTR(led1, 0664, led_show, led_store), |
| __ATTR(led2, 0664, led_show, led_store), |
| __ATTR(led3, 0664, led_show, led_store), |
| }; |
| |
| static struct device_attribute ddb_attrs_fanspeed[] = { |
| __ATTR_MRO(fanspeed0, fanspeed_show), |
| __ATTR_MRO(fanspeed1, fanspeed_show), |
| __ATTR_MRO(fanspeed2, fanspeed_show), |
| __ATTR_MRO(fanspeed3, fanspeed_show), |
| }; |
| |
| static struct class ddb_class = { |
| .name = "ddbridge", |
| .owner = THIS_MODULE, |
| .devnode = ddb_devnode, |
| }; |
| |
| static int ddb_class_create(void) |
| { |
| ddb_major = register_chrdev(0, DDB_NAME, &ddb_fops); |
| if (ddb_major < 0) |
| return ddb_major; |
| if (class_register(&ddb_class) < 0) |
| return -1; |
| return 0; |
| } |
| |
| static void ddb_class_destroy(void) |
| { |
| class_unregister(&ddb_class); |
| unregister_chrdev(ddb_major, DDB_NAME); |
| } |
| |
| static void ddb_device_attrs_del(struct ddb *dev) |
| { |
| int i; |
| |
| for (i = 0; i < 4; i++) |
| if (dev->link[i].info && dev->link[i].info->tempmon_irq) |
| device_remove_file(dev->ddb_dev, |
| &ddb_attrs_fanspeed[i]); |
| for (i = 0; i < dev->link[0].info->temp_num; i++) |
| device_remove_file(dev->ddb_dev, &ddb_attrs_temp[i]); |
| for (i = 0; i < dev->link[0].info->fan_num; i++) |
| device_remove_file(dev->ddb_dev, &ddb_attrs_fan[i]); |
| for (i = 0; i < dev->i2c_num && i < 4; i++) { |
| if (dev->link[0].info->led_num) |
| device_remove_file(dev->ddb_dev, &ddb_attrs_led[i]); |
| device_remove_file(dev->ddb_dev, &ddb_attrs_snr[i]); |
| device_remove_file(dev->ddb_dev, &ddb_attrs_ctemp[i]); |
| } |
| for (i = 0; ddb_attrs[i].attr.name; i++) |
| device_remove_file(dev->ddb_dev, &ddb_attrs[i]); |
| } |
| |
| static int ddb_device_attrs_add(struct ddb *dev) |
| { |
| int i; |
| |
| for (i = 0; ddb_attrs[i].attr.name; i++) |
| if (device_create_file(dev->ddb_dev, &ddb_attrs[i])) |
| goto fail; |
| for (i = 0; i < dev->link[0].info->temp_num; i++) |
| if (device_create_file(dev->ddb_dev, &ddb_attrs_temp[i])) |
| goto fail; |
| for (i = 0; i < dev->link[0].info->fan_num; i++) |
| if (device_create_file(dev->ddb_dev, &ddb_attrs_fan[i])) |
| goto fail; |
| for (i = 0; (i < dev->i2c_num) && (i < 4); i++) { |
| if (device_create_file(dev->ddb_dev, &ddb_attrs_snr[i])) |
| goto fail; |
| if (device_create_file(dev->ddb_dev, &ddb_attrs_ctemp[i])) |
| goto fail; |
| if (dev->link[0].info->led_num) |
| if (device_create_file(dev->ddb_dev, |
| &ddb_attrs_led[i])) |
| goto fail; |
| } |
| for (i = 0; i < 4; i++) |
| if (dev->link[i].info && dev->link[i].info->tempmon_irq) |
| if (device_create_file(dev->ddb_dev, |
| &ddb_attrs_fanspeed[i])) |
| goto fail; |
| return 0; |
| fail: |
| return -1; |
| } |
| |
| int ddb_device_create(struct ddb *dev) |
| { |
| int res = 0; |
| |
| if (ddb_num == DDB_MAX_ADAPTER) |
| return -ENOMEM; |
| mutex_lock(&ddb_mutex); |
| dev->nr = ddb_num; |
| ddbs[dev->nr] = dev; |
| dev->ddb_dev = device_create(&ddb_class, dev->dev, |
| MKDEV(ddb_major, dev->nr), |
| dev, "ddbridge%d", dev->nr); |
| if (IS_ERR(dev->ddb_dev)) { |
| res = PTR_ERR(dev->ddb_dev); |
| dev_info(dev->dev, "Could not create ddbridge%d\n", dev->nr); |
| goto fail; |
| } |
| res = ddb_device_attrs_add(dev); |
| if (res) { |
| ddb_device_attrs_del(dev); |
| device_destroy(&ddb_class, MKDEV(ddb_major, dev->nr)); |
| ddbs[dev->nr] = NULL; |
| dev->ddb_dev = ERR_PTR(-ENODEV); |
| } else { |
| ddb_num++; |
| } |
| fail: |
| mutex_unlock(&ddb_mutex); |
| return res; |
| } |
| |
| void ddb_device_destroy(struct ddb *dev) |
| { |
| if (IS_ERR(dev->ddb_dev)) |
| return; |
| ddb_device_attrs_del(dev); |
| device_destroy(&ddb_class, MKDEV(ddb_major, dev->nr)); |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static void tempmon_setfan(struct ddb_link *link) |
| { |
| u32 temp, temp2, pwm; |
| |
| if ((ddblreadl(link, TEMPMON_CONTROL) & |
| TEMPMON_CONTROL_OVERTEMP) != 0) { |
| dev_info(link->dev->dev, "Over temperature condition\n"); |
| link->overtemperature_error = 1; |
| } |
| temp = (ddblreadl(link, TEMPMON_SENSOR0) >> 8) & 0xFF; |
| if (temp & 0x80) |
| temp = 0; |
| temp2 = (ddblreadl(link, TEMPMON_SENSOR1) >> 8) & 0xFF; |
| if (temp2 & 0x80) |
| temp2 = 0; |
| if (temp2 > temp) |
| temp = temp2; |
| |
| pwm = (ddblreadl(link, TEMPMON_FANCONTROL) >> 8) & 0x0F; |
| if (pwm > 10) |
| pwm = 10; |
| |
| if (temp >= link->temp_tab[pwm]) { |
| while (pwm < 10 && temp >= link->temp_tab[pwm + 1]) |
| pwm += 1; |
| } else { |
| while (pwm > 1 && temp < link->temp_tab[pwm - 2]) |
| pwm -= 1; |
| } |
| ddblwritel(link, (pwm << 8), TEMPMON_FANCONTROL); |
| } |
| |
| static void temp_handler(void *data) |
| { |
| struct ddb_link *link = (struct ddb_link *)data; |
| |
| spin_lock(&link->temp_lock); |
| tempmon_setfan(link); |
| spin_unlock(&link->temp_lock); |
| } |
| |
| static int tempmon_init(struct ddb_link *link, int first_time) |
| { |
| struct ddb *dev = link->dev; |
| int status = 0; |
| u32 l = link->nr; |
| |
| spin_lock_irq(&link->temp_lock); |
| if (first_time) { |
| static u8 temperature_table[11] = { |
| 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 }; |
| |
| memcpy(link->temp_tab, temperature_table, |
| sizeof(temperature_table)); |
| } |
| ddb_irq_set(dev, l, link->info->tempmon_irq, temp_handler, link); |
| ddblwritel(link, (TEMPMON_CONTROL_OVERTEMP | TEMPMON_CONTROL_AUTOSCAN | |
| TEMPMON_CONTROL_INTENABLE), |
| TEMPMON_CONTROL); |
| ddblwritel(link, (3 << 8), TEMPMON_FANCONTROL); |
| |
| link->overtemperature_error = |
| ((ddblreadl(link, TEMPMON_CONTROL) & |
| TEMPMON_CONTROL_OVERTEMP) != 0); |
| if (link->overtemperature_error) { |
| dev_info(link->dev->dev, "Over temperature condition\n"); |
| status = -1; |
| } |
| tempmon_setfan(link); |
| spin_unlock_irq(&link->temp_lock); |
| return status; |
| } |
| |
| static int ddb_init_tempmon(struct ddb_link *link) |
| { |
| const struct ddb_info *info = link->info; |
| |
| if (!info->tempmon_irq) |
| return 0; |
| if (info->type == DDB_OCTOPUS_MAX_CT) |
| if (link->ids.regmapid < 0x00010002) |
| return 0; |
| spin_lock_init(&link->temp_lock); |
| dev_dbg(link->dev->dev, "init_tempmon\n"); |
| return tempmon_init(link, 1); |
| } |
| |
| /****************************************************************************/ |
| /****************************************************************************/ |
| /****************************************************************************/ |
| |
| static int ddb_init_boards(struct ddb *dev) |
| { |
| const struct ddb_info *info; |
| struct ddb_link *link; |
| u32 l; |
| |
| for (l = 0; l < DDB_MAX_LINK; l++) { |
| link = &dev->link[l]; |
| info = link->info; |
| |
| if (!info) |
| continue; |
| if (info->board_control) { |
| ddbwritel(dev, 0, DDB_LINK_TAG(l) | BOARD_CONTROL); |
| msleep(100); |
| ddbwritel(dev, info->board_control_2, |
| DDB_LINK_TAG(l) | BOARD_CONTROL); |
| usleep_range(2000, 3000); |
| ddbwritel(dev, |
| info->board_control_2 | info->board_control, |
| DDB_LINK_TAG(l) | BOARD_CONTROL); |
| usleep_range(2000, 3000); |
| } |
| ddb_init_tempmon(link); |
| } |
| return 0; |
| } |
| |
| int ddb_init(struct ddb *dev) |
| { |
| mutex_init(&dev->link[0].lnb.lock); |
| mutex_init(&dev->link[0].flash_mutex); |
| if (no_init) { |
| ddb_device_create(dev); |
| return 0; |
| } |
| |
| ddb_init_boards(dev); |
| |
| if (ddb_i2c_init(dev) < 0) |
| goto fail1; |
| ddb_ports_init(dev); |
| if (ddb_buffers_alloc(dev) < 0) { |
| dev_info(dev->dev, "Could not allocate buffer memory\n"); |
| goto fail2; |
| } |
| if (ddb_ports_attach(dev) < 0) |
| goto fail3; |
| |
| ddb_device_create(dev); |
| |
| if (dev->link[0].info->fan_num) { |
| ddbwritel(dev, 1, GPIO_DIRECTION); |
| ddbwritel(dev, 1, GPIO_OUTPUT); |
| } |
| return 0; |
| |
| fail3: |
| dev_err(dev->dev, "fail3\n"); |
| ddb_ports_detach(dev); |
| ddb_buffers_free(dev); |
| fail2: |
| dev_err(dev->dev, "fail2\n"); |
| ddb_ports_release(dev); |
| ddb_i2c_release(dev); |
| fail1: |
| dev_err(dev->dev, "fail1\n"); |
| return -1; |
| } |
| |
| void ddb_unmap(struct ddb *dev) |
| { |
| if (dev->regs) |
| iounmap(dev->regs); |
| vfree(dev); |
| } |
| |
| int ddb_exit_ddbridge(int stage, int error) |
| { |
| switch (stage) { |
| default: |
| case 2: |
| destroy_workqueue(ddb_wq); |
| fallthrough; |
| case 1: |
| ddb_class_destroy(); |
| break; |
| } |
| |
| return error; |
| } |
| |
| int ddb_init_ddbridge(void) |
| { |
| if (dma_buf_num < 8) |
| dma_buf_num = 8; |
| if (dma_buf_num > 32) |
| dma_buf_num = 32; |
| if (dma_buf_size < 1) |
| dma_buf_size = 1; |
| if (dma_buf_size > 43) |
| dma_buf_size = 43; |
| |
| if (ddb_class_create() < 0) |
| return -1; |
| ddb_wq = alloc_workqueue("ddbridge", 0, 0); |
| if (!ddb_wq) |
| return ddb_exit_ddbridge(1, -1); |
| |
| return 0; |
| } |