| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2022 MediaTek Inc. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bits.h> |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/cpuidle.h> |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/kthread.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/nvmem-consumer.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_opp.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/reset.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/thermal.h> |
| |
| /* svs bank 1-line software id */ |
| #define SVSB_CPU_LITTLE BIT(0) |
| #define SVSB_CPU_BIG BIT(1) |
| #define SVSB_CCI BIT(2) |
| #define SVSB_GPU BIT(3) |
| |
| /* svs bank 2-line type */ |
| #define SVSB_LOW BIT(8) |
| #define SVSB_HIGH BIT(9) |
| |
| /* svs bank mode support */ |
| #define SVSB_MODE_ALL_DISABLE 0 |
| #define SVSB_MODE_INIT01 BIT(1) |
| #define SVSB_MODE_INIT02 BIT(2) |
| #define SVSB_MODE_MON BIT(3) |
| |
| /* svs bank volt flags */ |
| #define SVSB_INIT01_PD_REQ BIT(0) |
| #define SVSB_INIT01_VOLT_IGNORE BIT(1) |
| #define SVSB_INIT01_VOLT_INC_ONLY BIT(2) |
| #define SVSB_MON_VOLT_IGNORE BIT(16) |
| #define SVSB_REMOVE_DVTFIXED_VOLT BIT(24) |
| |
| /* svs bank register fields and common configuration */ |
| #define SVSB_PTPCONFIG_DETMAX GENMASK(15, 0) |
| #define SVSB_DET_MAX FIELD_PREP(SVSB_PTPCONFIG_DETMAX, 0xffff) |
| #define SVSB_DET_WINDOW 0xa28 |
| |
| /* DESCHAR */ |
| #define SVSB_DESCHAR_FLD_MDES GENMASK(7, 0) |
| #define SVSB_DESCHAR_FLD_BDES GENMASK(15, 8) |
| |
| /* TEMPCHAR */ |
| #define SVSB_TEMPCHAR_FLD_DVT_FIXED GENMASK(7, 0) |
| #define SVSB_TEMPCHAR_FLD_MTDES GENMASK(15, 8) |
| #define SVSB_TEMPCHAR_FLD_VCO GENMASK(23, 16) |
| |
| /* DETCHAR */ |
| #define SVSB_DETCHAR_FLD_DCMDET GENMASK(7, 0) |
| #define SVSB_DETCHAR_FLD_DCBDET GENMASK(15, 8) |
| |
| /* SVSEN (PTPEN) */ |
| #define SVSB_PTPEN_INIT01 BIT(0) |
| #define SVSB_PTPEN_MON BIT(1) |
| #define SVSB_PTPEN_INIT02 (SVSB_PTPEN_INIT01 | BIT(2)) |
| #define SVSB_PTPEN_OFF 0x0 |
| |
| /* FREQPCTS */ |
| #define SVSB_FREQPCTS_FLD_PCT0_4 GENMASK(7, 0) |
| #define SVSB_FREQPCTS_FLD_PCT1_5 GENMASK(15, 8) |
| #define SVSB_FREQPCTS_FLD_PCT2_6 GENMASK(23, 16) |
| #define SVSB_FREQPCTS_FLD_PCT3_7 GENMASK(31, 24) |
| |
| /* INTSTS */ |
| #define SVSB_INTSTS_VAL_CLEAN 0x00ffffff |
| #define SVSB_INTSTS_F0_COMPLETE BIT(0) |
| #define SVSB_INTSTS_FLD_MONVOP GENMASK(23, 16) |
| #define SVSB_RUNCONFIG_DEFAULT 0x80000000 |
| |
| /* LIMITVALS */ |
| #define SVSB_LIMITVALS_FLD_DTLO GENMASK(7, 0) |
| #define SVSB_LIMITVALS_FLD_DTHI GENMASK(15, 8) |
| #define SVSB_LIMITVALS_FLD_VMIN GENMASK(23, 16) |
| #define SVSB_LIMITVALS_FLD_VMAX GENMASK(31, 24) |
| #define SVSB_VAL_DTHI 0x1 |
| #define SVSB_VAL_DTLO 0xfe |
| |
| /* INTEN */ |
| #define SVSB_INTEN_F0EN BIT(0) |
| #define SVSB_INTEN_DACK0UPEN BIT(8) |
| #define SVSB_INTEN_DC0EN BIT(9) |
| #define SVSB_INTEN_DC1EN BIT(10) |
| #define SVSB_INTEN_DACK0LOEN BIT(11) |
| #define SVSB_INTEN_INITPROD_OVF_EN BIT(12) |
| #define SVSB_INTEN_INITSUM_OVF_EN BIT(14) |
| #define SVSB_INTEN_MONVOPEN GENMASK(23, 16) |
| #define SVSB_INTEN_INIT0x (SVSB_INTEN_F0EN | SVSB_INTEN_DACK0UPEN | \ |
| SVSB_INTEN_DC0EN | SVSB_INTEN_DC1EN | \ |
| SVSB_INTEN_DACK0LOEN | \ |
| SVSB_INTEN_INITPROD_OVF_EN | \ |
| SVSB_INTEN_INITSUM_OVF_EN) |
| |
| /* TSCALCS */ |
| #define SVSB_TSCALCS_FLD_MTS GENMASK(11, 0) |
| #define SVSB_TSCALCS_FLD_BTS GENMASK(23, 12) |
| |
| /* INIT2VALS */ |
| #define SVSB_INIT2VALS_FLD_DCVOFFSETIN GENMASK(15, 0) |
| #define SVSB_INIT2VALS_FLD_AGEVOFFSETIN GENMASK(31, 16) |
| |
| /* VOPS */ |
| #define SVSB_VOPS_FLD_VOP0_4 GENMASK(7, 0) |
| #define SVSB_VOPS_FLD_VOP1_5 GENMASK(15, 8) |
| #define SVSB_VOPS_FLD_VOP2_6 GENMASK(23, 16) |
| #define SVSB_VOPS_FLD_VOP3_7 GENMASK(31, 24) |
| |
| /* svs bank related setting */ |
| #define BITS8 8 |
| #define MAX_OPP_ENTRIES 16 |
| #define REG_BYTES 4 |
| #define SVSB_DC_SIGNED_BIT BIT(15) |
| #define SVSB_DET_CLK_EN BIT(31) |
| #define SVSB_TEMP_LOWER_BOUND 0xb2 |
| #define SVSB_TEMP_UPPER_BOUND 0x64 |
| |
| static DEFINE_SPINLOCK(svs_lock); |
| |
| #define debug_fops_ro(name) \ |
| static int svs_##name##_debug_open(struct inode *inode, \ |
| struct file *filp) \ |
| { \ |
| return single_open(filp, svs_##name##_debug_show, \ |
| inode->i_private); \ |
| } \ |
| static const struct file_operations svs_##name##_debug_fops = { \ |
| .owner = THIS_MODULE, \ |
| .open = svs_##name##_debug_open, \ |
| .read = seq_read, \ |
| .llseek = seq_lseek, \ |
| .release = single_release, \ |
| } |
| |
| #define debug_fops_rw(name) \ |
| static int svs_##name##_debug_open(struct inode *inode, \ |
| struct file *filp) \ |
| { \ |
| return single_open(filp, svs_##name##_debug_show, \ |
| inode->i_private); \ |
| } \ |
| static const struct file_operations svs_##name##_debug_fops = { \ |
| .owner = THIS_MODULE, \ |
| .open = svs_##name##_debug_open, \ |
| .read = seq_read, \ |
| .write = svs_##name##_debug_write, \ |
| .llseek = seq_lseek, \ |
| .release = single_release, \ |
| } |
| |
| #define svs_dentry_data(name) {__stringify(name), &svs_##name##_debug_fops} |
| |
| /** |
| * enum svsb_phase - svs bank phase enumeration |
| * @SVSB_PHASE_ERROR: svs bank encounters unexpected condition |
| * @SVSB_PHASE_INIT01: svs bank basic init for data calibration |
| * @SVSB_PHASE_INIT02: svs bank can provide voltages to opp table |
| * @SVSB_PHASE_MON: svs bank can provide voltages with thermal effect |
| * @SVSB_PHASE_MAX: total number of svs bank phase (debug purpose) |
| * |
| * Each svs bank has its own independent phase and we enable each svs bank by |
| * running their phase orderly. However, when svs bank encounters unexpected |
| * condition, it will fire an irq (PHASE_ERROR) to inform svs software. |
| * |
| * svs bank general phase-enabled order: |
| * SVSB_PHASE_INIT01 -> SVSB_PHASE_INIT02 -> SVSB_PHASE_MON |
| */ |
| enum svsb_phase { |
| SVSB_PHASE_ERROR = 0, |
| SVSB_PHASE_INIT01, |
| SVSB_PHASE_INIT02, |
| SVSB_PHASE_MON, |
| SVSB_PHASE_MAX, |
| }; |
| |
| enum svs_reg_index { |
| DESCHAR = 0, |
| TEMPCHAR, |
| DETCHAR, |
| AGECHAR, |
| DCCONFIG, |
| AGECONFIG, |
| FREQPCT30, |
| FREQPCT74, |
| LIMITVALS, |
| VBOOT, |
| DETWINDOW, |
| CONFIG, |
| TSCALCS, |
| RUNCONFIG, |
| SVSEN, |
| INIT2VALS, |
| DCVALUES, |
| AGEVALUES, |
| VOP30, |
| VOP74, |
| TEMP, |
| INTSTS, |
| INTSTSRAW, |
| INTEN, |
| CHKINT, |
| CHKSHIFT, |
| STATUS, |
| VDESIGN30, |
| VDESIGN74, |
| DVT30, |
| DVT74, |
| AGECOUNT, |
| SMSTATE0, |
| SMSTATE1, |
| CTL0, |
| DESDETSEC, |
| TEMPAGESEC, |
| CTRLSPARE0, |
| CTRLSPARE1, |
| CTRLSPARE2, |
| CTRLSPARE3, |
| CORESEL, |
| THERMINTST, |
| INTST, |
| THSTAGE0ST, |
| THSTAGE1ST, |
| THSTAGE2ST, |
| THAHBST0, |
| THAHBST1, |
| SPARE0, |
| SPARE1, |
| SPARE2, |
| SPARE3, |
| THSLPEVEB, |
| SVS_REG_MAX, |
| }; |
| |
| static const u32 svs_regs_v2[] = { |
| [DESCHAR] = 0xc00, |
| [TEMPCHAR] = 0xc04, |
| [DETCHAR] = 0xc08, |
| [AGECHAR] = 0xc0c, |
| [DCCONFIG] = 0xc10, |
| [AGECONFIG] = 0xc14, |
| [FREQPCT30] = 0xc18, |
| [FREQPCT74] = 0xc1c, |
| [LIMITVALS] = 0xc20, |
| [VBOOT] = 0xc24, |
| [DETWINDOW] = 0xc28, |
| [CONFIG] = 0xc2c, |
| [TSCALCS] = 0xc30, |
| [RUNCONFIG] = 0xc34, |
| [SVSEN] = 0xc38, |
| [INIT2VALS] = 0xc3c, |
| [DCVALUES] = 0xc40, |
| [AGEVALUES] = 0xc44, |
| [VOP30] = 0xc48, |
| [VOP74] = 0xc4c, |
| [TEMP] = 0xc50, |
| [INTSTS] = 0xc54, |
| [INTSTSRAW] = 0xc58, |
| [INTEN] = 0xc5c, |
| [CHKINT] = 0xc60, |
| [CHKSHIFT] = 0xc64, |
| [STATUS] = 0xc68, |
| [VDESIGN30] = 0xc6c, |
| [VDESIGN74] = 0xc70, |
| [DVT30] = 0xc74, |
| [DVT74] = 0xc78, |
| [AGECOUNT] = 0xc7c, |
| [SMSTATE0] = 0xc80, |
| [SMSTATE1] = 0xc84, |
| [CTL0] = 0xc88, |
| [DESDETSEC] = 0xce0, |
| [TEMPAGESEC] = 0xce4, |
| [CTRLSPARE0] = 0xcf0, |
| [CTRLSPARE1] = 0xcf4, |
| [CTRLSPARE2] = 0xcf8, |
| [CTRLSPARE3] = 0xcfc, |
| [CORESEL] = 0xf00, |
| [THERMINTST] = 0xf04, |
| [INTST] = 0xf08, |
| [THSTAGE0ST] = 0xf0c, |
| [THSTAGE1ST] = 0xf10, |
| [THSTAGE2ST] = 0xf14, |
| [THAHBST0] = 0xf18, |
| [THAHBST1] = 0xf1c, |
| [SPARE0] = 0xf20, |
| [SPARE1] = 0xf24, |
| [SPARE2] = 0xf28, |
| [SPARE3] = 0xf2c, |
| [THSLPEVEB] = 0xf30, |
| }; |
| |
| /** |
| * struct svs_platform - svs platform control |
| * @name: svs platform name |
| * @base: svs platform register base |
| * @dev: svs platform device |
| * @main_clk: main clock for svs bank |
| * @pbank: svs bank pointer needing to be protected by spin_lock section |
| * @banks: svs banks that svs platform supports |
| * @rst: svs platform reset control |
| * @efuse_parsing: svs platform efuse parsing function pointer |
| * @probe: svs platform probe function pointer |
| * @efuse_max: total number of svs efuse |
| * @tefuse_max: total number of thermal efuse |
| * @regs: svs platform registers map |
| * @bank_max: total number of svs banks |
| * @efuse: svs efuse data received from NVMEM framework |
| * @tefuse: thermal efuse data received from NVMEM framework |
| */ |
| struct svs_platform { |
| char *name; |
| void __iomem *base; |
| struct device *dev; |
| struct clk *main_clk; |
| struct svs_bank *pbank; |
| struct svs_bank *banks; |
| struct reset_control *rst; |
| bool (*efuse_parsing)(struct svs_platform *svsp); |
| int (*probe)(struct svs_platform *svsp); |
| size_t efuse_max; |
| size_t tefuse_max; |
| const u32 *regs; |
| u32 bank_max; |
| u32 *efuse; |
| u32 *tefuse; |
| }; |
| |
| struct svs_platform_data { |
| char *name; |
| struct svs_bank *banks; |
| bool (*efuse_parsing)(struct svs_platform *svsp); |
| int (*probe)(struct svs_platform *svsp); |
| const u32 *regs; |
| u32 bank_max; |
| }; |
| |
| /** |
| * struct svs_bank - svs bank representation |
| * @dev: bank device |
| * @opp_dev: device for opp table/buck control |
| * @init_completion: the timeout completion for bank init |
| * @buck: regulator used by opp_dev |
| * @tzd: thermal zone device for getting temperature |
| * @lock: mutex lock to protect voltage update process |
| * @set_freq_pct: function pointer to set bank frequency percent table |
| * @get_volts: function pointer to get bank voltages |
| * @name: bank name |
| * @buck_name: regulator name |
| * @tzone_name: thermal zone name |
| * @phase: bank current phase |
| * @volt_od: bank voltage overdrive |
| * @reg_data: bank register data in different phase for debug purpose |
| * @pm_runtime_enabled_count: bank pm runtime enabled count |
| * @mode_support: bank mode support. |
| * @freq_base: reference frequency for bank init |
| * @turn_freq_base: refenrece frequency for 2-line turn point |
| * @vboot: voltage request for bank init01 only |
| * @opp_dfreq: default opp frequency table |
| * @opp_dvolt: default opp voltage table |
| * @freq_pct: frequency percent table for bank init |
| * @volt: bank voltage table |
| * @volt_step: bank voltage step |
| * @volt_base: bank voltage base |
| * @volt_flags: bank voltage flags |
| * @vmax: bank voltage maximum |
| * @vmin: bank voltage minimum |
| * @age_config: bank age configuration |
| * @age_voffset_in: bank age voltage offset |
| * @dc_config: bank dc configuration |
| * @dc_voffset_in: bank dc voltage offset |
| * @dvt_fixed: bank dvt fixed value |
| * @vco: bank VCO value |
| * @chk_shift: bank chicken shift |
| * @core_sel: bank selection |
| * @opp_count: bank opp count |
| * @int_st: bank interrupt identification |
| * @sw_id: bank software identification |
| * @cpu_id: cpu core id for SVS CPU bank use only |
| * @ctl0: TS-x selection |
| * @temp: bank temperature |
| * @tzone_htemp: thermal zone high temperature threshold |
| * @tzone_htemp_voffset: thermal zone high temperature voltage offset |
| * @tzone_ltemp: thermal zone low temperature threshold |
| * @tzone_ltemp_voffset: thermal zone low temperature voltage offset |
| * @bts: svs efuse data |
| * @mts: svs efuse data |
| * @bdes: svs efuse data |
| * @mdes: svs efuse data |
| * @mtdes: svs efuse data |
| * @dcbdet: svs efuse data |
| * @dcmdet: svs efuse data |
| * @turn_pt: 2-line turn point tells which opp_volt calculated by high/low bank |
| * @type: bank type to represent it is 2-line (high/low) bank or 1-line bank |
| * |
| * Svs bank will generate suitalbe voltages by below general math equation |
| * and provide these voltages to opp voltage table. |
| * |
| * opp_volt[i] = (volt[i] * volt_step) + volt_base; |
| */ |
| struct svs_bank { |
| struct device *dev; |
| struct device *opp_dev; |
| struct completion init_completion; |
| struct regulator *buck; |
| struct thermal_zone_device *tzd; |
| struct mutex lock; /* lock to protect voltage update process */ |
| void (*set_freq_pct)(struct svs_platform *svsp); |
| void (*get_volts)(struct svs_platform *svsp); |
| char *name; |
| char *buck_name; |
| char *tzone_name; |
| enum svsb_phase phase; |
| s32 volt_od; |
| u32 reg_data[SVSB_PHASE_MAX][SVS_REG_MAX]; |
| u32 pm_runtime_enabled_count; |
| u32 mode_support; |
| u32 freq_base; |
| u32 turn_freq_base; |
| u32 vboot; |
| u32 opp_dfreq[MAX_OPP_ENTRIES]; |
| u32 opp_dvolt[MAX_OPP_ENTRIES]; |
| u32 freq_pct[MAX_OPP_ENTRIES]; |
| u32 volt[MAX_OPP_ENTRIES]; |
| u32 volt_step; |
| u32 volt_base; |
| u32 volt_flags; |
| u32 vmax; |
| u32 vmin; |
| u32 age_config; |
| u32 age_voffset_in; |
| u32 dc_config; |
| u32 dc_voffset_in; |
| u32 dvt_fixed; |
| u32 vco; |
| u32 chk_shift; |
| u32 core_sel; |
| u32 opp_count; |
| u32 int_st; |
| u32 sw_id; |
| u32 cpu_id; |
| u32 ctl0; |
| u32 temp; |
| u32 tzone_htemp; |
| u32 tzone_htemp_voffset; |
| u32 tzone_ltemp; |
| u32 tzone_ltemp_voffset; |
| u32 bts; |
| u32 mts; |
| u32 bdes; |
| u32 mdes; |
| u32 mtdes; |
| u32 dcbdet; |
| u32 dcmdet; |
| u32 turn_pt; |
| u32 type; |
| }; |
| |
| static u32 percent(u32 numerator, u32 denominator) |
| { |
| /* If not divide 1000, "numerator * 100" will have data overflow. */ |
| numerator /= 1000; |
| denominator /= 1000; |
| |
| return DIV_ROUND_UP(numerator * 100, denominator); |
| } |
| |
| static u32 svs_readl_relaxed(struct svs_platform *svsp, enum svs_reg_index rg_i) |
| { |
| return readl_relaxed(svsp->base + svsp->regs[rg_i]); |
| } |
| |
| static void svs_writel_relaxed(struct svs_platform *svsp, u32 val, |
| enum svs_reg_index rg_i) |
| { |
| writel_relaxed(val, svsp->base + svsp->regs[rg_i]); |
| } |
| |
| static void svs_switch_bank(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| |
| svs_writel_relaxed(svsp, svsb->core_sel, CORESEL); |
| } |
| |
| static u32 svs_bank_volt_to_opp_volt(u32 svsb_volt, u32 svsb_volt_step, |
| u32 svsb_volt_base) |
| { |
| return (svsb_volt * svsb_volt_step) + svsb_volt_base; |
| } |
| |
| static u32 svs_opp_volt_to_bank_volt(u32 opp_u_volt, u32 svsb_volt_step, |
| u32 svsb_volt_base) |
| { |
| return (opp_u_volt - svsb_volt_base) / svsb_volt_step; |
| } |
| |
| static int svs_sync_bank_volts_from_opp(struct svs_bank *svsb) |
| { |
| struct dev_pm_opp *opp; |
| u32 i, opp_u_volt; |
| |
| for (i = 0; i < svsb->opp_count; i++) { |
| opp = dev_pm_opp_find_freq_exact(svsb->opp_dev, |
| svsb->opp_dfreq[i], |
| true); |
| if (IS_ERR(opp)) { |
| dev_err(svsb->dev, "cannot find freq = %u (%ld)\n", |
| svsb->opp_dfreq[i], PTR_ERR(opp)); |
| return PTR_ERR(opp); |
| } |
| |
| opp_u_volt = dev_pm_opp_get_voltage(opp); |
| svsb->volt[i] = svs_opp_volt_to_bank_volt(opp_u_volt, |
| svsb->volt_step, |
| svsb->volt_base); |
| dev_pm_opp_put(opp); |
| } |
| |
| return 0; |
| } |
| |
| static int svs_adjust_pm_opp_volts(struct svs_bank *svsb) |
| { |
| int ret = -EPERM, tzone_temp = 0; |
| u32 i, svsb_volt, opp_volt, temp_voffset = 0, opp_start, opp_stop; |
| |
| mutex_lock(&svsb->lock); |
| |
| /* |
| * 2-line bank updates its corresponding opp volts. |
| * 1-line bank updates all opp volts. |
| */ |
| if (svsb->type == SVSB_HIGH) { |
| opp_start = 0; |
| opp_stop = svsb->turn_pt; |
| } else if (svsb->type == SVSB_LOW) { |
| opp_start = svsb->turn_pt; |
| opp_stop = svsb->opp_count; |
| } else { |
| opp_start = 0; |
| opp_stop = svsb->opp_count; |
| } |
| |
| /* Get thermal effect */ |
| if (svsb->phase == SVSB_PHASE_MON) { |
| ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp); |
| if (ret || (svsb->temp > SVSB_TEMP_UPPER_BOUND && |
| svsb->temp < SVSB_TEMP_LOWER_BOUND)) { |
| dev_err(svsb->dev, "%s: %d (0x%x), run default volts\n", |
| svsb->tzone_name, ret, svsb->temp); |
| svsb->phase = SVSB_PHASE_ERROR; |
| } |
| |
| if (tzone_temp >= svsb->tzone_htemp) |
| temp_voffset += svsb->tzone_htemp_voffset; |
| else if (tzone_temp <= svsb->tzone_ltemp) |
| temp_voffset += svsb->tzone_ltemp_voffset; |
| |
| /* 2-line bank update all opp volts when running mon mode */ |
| if (svsb->type == SVSB_HIGH || svsb->type == SVSB_LOW) { |
| opp_start = 0; |
| opp_stop = svsb->opp_count; |
| } |
| } |
| |
| /* vmin <= svsb_volt (opp_volt) <= default opp voltage */ |
| for (i = opp_start; i < opp_stop; i++) { |
| switch (svsb->phase) { |
| case SVSB_PHASE_ERROR: |
| opp_volt = svsb->opp_dvolt[i]; |
| break; |
| case SVSB_PHASE_INIT01: |
| /* do nothing */ |
| goto unlock_mutex; |
| case SVSB_PHASE_INIT02: |
| svsb_volt = max(svsb->volt[i], svsb->vmin); |
| opp_volt = svs_bank_volt_to_opp_volt(svsb_volt, |
| svsb->volt_step, |
| svsb->volt_base); |
| break; |
| case SVSB_PHASE_MON: |
| svsb_volt = max(svsb->volt[i] + temp_voffset, svsb->vmin); |
| opp_volt = svs_bank_volt_to_opp_volt(svsb_volt, |
| svsb->volt_step, |
| svsb->volt_base); |
| break; |
| default: |
| dev_err(svsb->dev, "unknown phase: %u\n", svsb->phase); |
| ret = -EINVAL; |
| goto unlock_mutex; |
| } |
| |
| opp_volt = min(opp_volt, svsb->opp_dvolt[i]); |
| ret = dev_pm_opp_adjust_voltage(svsb->opp_dev, |
| svsb->opp_dfreq[i], |
| opp_volt, opp_volt, |
| svsb->opp_dvolt[i]); |
| if (ret) { |
| dev_err(svsb->dev, "set %uuV fail: %d\n", |
| opp_volt, ret); |
| goto unlock_mutex; |
| } |
| } |
| |
| unlock_mutex: |
| mutex_unlock(&svsb->lock); |
| |
| return ret; |
| } |
| |
| static int svs_dump_debug_show(struct seq_file *m, void *p) |
| { |
| struct svs_platform *svsp = (struct svs_platform *)m->private; |
| struct svs_bank *svsb; |
| unsigned long svs_reg_addr; |
| u32 idx, i, j, bank_id; |
| |
| for (i = 0; i < svsp->efuse_max; i++) |
| if (svsp->efuse && svsp->efuse[i]) |
| seq_printf(m, "M_HW_RES%d = 0x%08x\n", |
| i, svsp->efuse[i]); |
| |
| for (i = 0; i < svsp->tefuse_max; i++) |
| if (svsp->tefuse) |
| seq_printf(m, "THERMAL_EFUSE%d = 0x%08x\n", |
| i, svsp->tefuse[i]); |
| |
| for (bank_id = 0, idx = 0; idx < svsp->bank_max; idx++, bank_id++) { |
| svsb = &svsp->banks[idx]; |
| |
| for (i = SVSB_PHASE_INIT01; i <= SVSB_PHASE_MON; i++) { |
| seq_printf(m, "Bank_number = %u\n", bank_id); |
| |
| if (i == SVSB_PHASE_INIT01 || i == SVSB_PHASE_INIT02) |
| seq_printf(m, "mode = init%d\n", i); |
| else if (i == SVSB_PHASE_MON) |
| seq_puts(m, "mode = mon\n"); |
| else |
| seq_puts(m, "mode = error\n"); |
| |
| for (j = DESCHAR; j < SVS_REG_MAX; j++) { |
| svs_reg_addr = (unsigned long)(svsp->base + |
| svsp->regs[j]); |
| seq_printf(m, "0x%08lx = 0x%08x\n", |
| svs_reg_addr, svsb->reg_data[i][j]); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| debug_fops_ro(dump); |
| |
| static int svs_enable_debug_show(struct seq_file *m, void *v) |
| { |
| struct svs_bank *svsb = (struct svs_bank *)m->private; |
| |
| switch (svsb->phase) { |
| case SVSB_PHASE_ERROR: |
| seq_puts(m, "disabled\n"); |
| break; |
| case SVSB_PHASE_INIT01: |
| seq_puts(m, "init1\n"); |
| break; |
| case SVSB_PHASE_INIT02: |
| seq_puts(m, "init2\n"); |
| break; |
| case SVSB_PHASE_MON: |
| seq_puts(m, "mon mode\n"); |
| break; |
| default: |
| seq_puts(m, "unknown\n"); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t svs_enable_debug_write(struct file *filp, |
| const char __user *buffer, |
| size_t count, loff_t *pos) |
| { |
| struct svs_bank *svsb = file_inode(filp)->i_private; |
| struct svs_platform *svsp = dev_get_drvdata(svsb->dev); |
| unsigned long flags; |
| int enabled, ret; |
| char *buf = NULL; |
| |
| if (count >= PAGE_SIZE) |
| return -EINVAL; |
| |
| buf = (char *)memdup_user_nul(buffer, count); |
| if (IS_ERR(buf)) |
| return PTR_ERR(buf); |
| |
| ret = kstrtoint(buf, 10, &enabled); |
| if (ret) |
| return ret; |
| |
| if (!enabled) { |
| spin_lock_irqsave(&svs_lock, flags); |
| svsp->pbank = svsb; |
| svsb->mode_support = SVSB_MODE_ALL_DISABLE; |
| svs_switch_bank(svsp); |
| svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN); |
| svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS); |
| spin_unlock_irqrestore(&svs_lock, flags); |
| |
| svsb->phase = SVSB_PHASE_ERROR; |
| svs_adjust_pm_opp_volts(svsb); |
| } |
| |
| kfree(buf); |
| |
| return count; |
| } |
| |
| debug_fops_rw(enable); |
| |
| static int svs_status_debug_show(struct seq_file *m, void *v) |
| { |
| struct svs_bank *svsb = (struct svs_bank *)m->private; |
| struct dev_pm_opp *opp; |
| int tzone_temp = 0, ret; |
| u32 i; |
| |
| ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp); |
| if (ret) |
| seq_printf(m, "%s: temperature ignore, turn_pt = %u\n", |
| svsb->name, svsb->turn_pt); |
| else |
| seq_printf(m, "%s: temperature = %d, turn_pt = %u\n", |
| svsb->name, tzone_temp, svsb->turn_pt); |
| |
| for (i = 0; i < svsb->opp_count; i++) { |
| opp = dev_pm_opp_find_freq_exact(svsb->opp_dev, |
| svsb->opp_dfreq[i], true); |
| if (IS_ERR(opp)) { |
| seq_printf(m, "%s: cannot find freq = %u (%ld)\n", |
| svsb->name, svsb->opp_dfreq[i], |
| PTR_ERR(opp)); |
| return PTR_ERR(opp); |
| } |
| |
| seq_printf(m, "opp_freq[%02u]: %u, opp_volt[%02u]: %lu, ", |
| i, svsb->opp_dfreq[i], i, |
| dev_pm_opp_get_voltage(opp)); |
| seq_printf(m, "svsb_volt[%02u]: 0x%x, freq_pct[%02u]: %u\n", |
| i, svsb->volt[i], i, svsb->freq_pct[i]); |
| dev_pm_opp_put(opp); |
| } |
| |
| return 0; |
| } |
| |
| debug_fops_ro(status); |
| |
| static int svs_create_debug_cmds(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb; |
| struct dentry *svs_dir, *svsb_dir, *file_entry; |
| const char *d = "/sys/kernel/debug/svs"; |
| u32 i, idx; |
| |
| struct svs_dentry { |
| const char *name; |
| const struct file_operations *fops; |
| }; |
| |
| struct svs_dentry svs_entries[] = { |
| svs_dentry_data(dump), |
| }; |
| |
| struct svs_dentry svsb_entries[] = { |
| svs_dentry_data(enable), |
| svs_dentry_data(status), |
| }; |
| |
| svs_dir = debugfs_create_dir("svs", NULL); |
| if (IS_ERR(svs_dir)) { |
| dev_err(svsp->dev, "cannot create %s: %ld\n", |
| d, PTR_ERR(svs_dir)); |
| return PTR_ERR(svs_dir); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(svs_entries); i++) { |
| file_entry = debugfs_create_file(svs_entries[i].name, 0664, |
| svs_dir, svsp, |
| svs_entries[i].fops); |
| if (IS_ERR(file_entry)) { |
| dev_err(svsp->dev, "cannot create %s/%s: %ld\n", |
| d, svs_entries[i].name, PTR_ERR(file_entry)); |
| return PTR_ERR(file_entry); |
| } |
| } |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (svsb->mode_support == SVSB_MODE_ALL_DISABLE) |
| continue; |
| |
| svsb_dir = debugfs_create_dir(svsb->name, svs_dir); |
| if (IS_ERR(svsb_dir)) { |
| dev_err(svsp->dev, "cannot create %s/%s: %ld\n", |
| d, svsb->name, PTR_ERR(svsb_dir)); |
| return PTR_ERR(svsb_dir); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(svsb_entries); i++) { |
| file_entry = debugfs_create_file(svsb_entries[i].name, |
| 0664, svsb_dir, svsb, |
| svsb_entries[i].fops); |
| if (IS_ERR(file_entry)) { |
| dev_err(svsp->dev, "no %s/%s/%s?: %ld\n", |
| d, svsb->name, svsb_entries[i].name, |
| PTR_ERR(file_entry)); |
| return PTR_ERR(file_entry); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static u32 interpolate(u32 f0, u32 f1, u32 v0, u32 v1, u32 fx) |
| { |
| u32 vx; |
| |
| if (v0 == v1 || f0 == f1) |
| return v0; |
| |
| /* *100 to have decimal fraction factor */ |
| vx = (v0 * 100) - ((((v0 - v1) * 100) / (f0 - f1)) * (f0 - fx)); |
| |
| return DIV_ROUND_UP(vx, 100); |
| } |
| |
| static void svs_get_bank_volts_v3(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| u32 i, j, *vop, vop74, vop30, turn_pt = svsb->turn_pt; |
| u32 b_sft, shift_byte = 0, opp_start = 0, opp_stop = 0; |
| u32 middle_index = (svsb->opp_count / 2); |
| |
| if (svsb->phase == SVSB_PHASE_MON && |
| svsb->volt_flags & SVSB_MON_VOLT_IGNORE) |
| return; |
| |
| vop74 = svs_readl_relaxed(svsp, VOP74); |
| vop30 = svs_readl_relaxed(svsp, VOP30); |
| |
| /* Target is to set svsb->volt[] by algorithm */ |
| if (turn_pt < middle_index) { |
| if (svsb->type == SVSB_HIGH) { |
| /* volt[0] ~ volt[turn_pt - 1] */ |
| for (i = 0; i < turn_pt; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| vop = (shift_byte < REG_BYTES) ? &vop30 : |
| &vop74; |
| svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0); |
| shift_byte++; |
| } |
| } else if (svsb->type == SVSB_LOW) { |
| /* volt[turn_pt] + volt[j] ~ volt[opp_count - 1] */ |
| j = svsb->opp_count - 7; |
| svsb->volt[turn_pt] = FIELD_GET(SVSB_VOPS_FLD_VOP0_4, vop30); |
| shift_byte++; |
| for (i = j; i < svsb->opp_count; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| vop = (shift_byte < REG_BYTES) ? &vop30 : |
| &vop74; |
| svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0); |
| shift_byte++; |
| } |
| |
| /* volt[turn_pt + 1] ~ volt[j - 1] by interpolate */ |
| for (i = turn_pt + 1; i < j; i++) |
| svsb->volt[i] = interpolate(svsb->freq_pct[turn_pt], |
| svsb->freq_pct[j], |
| svsb->volt[turn_pt], |
| svsb->volt[j], |
| svsb->freq_pct[i]); |
| } |
| } else { |
| if (svsb->type == SVSB_HIGH) { |
| /* volt[0] + volt[j] ~ volt[turn_pt - 1] */ |
| j = turn_pt - 7; |
| svsb->volt[0] = FIELD_GET(SVSB_VOPS_FLD_VOP0_4, vop30); |
| shift_byte++; |
| for (i = j; i < turn_pt; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| vop = (shift_byte < REG_BYTES) ? &vop30 : |
| &vop74; |
| svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0); |
| shift_byte++; |
| } |
| |
| /* volt[1] ~ volt[j - 1] by interpolate */ |
| for (i = 1; i < j; i++) |
| svsb->volt[i] = interpolate(svsb->freq_pct[0], |
| svsb->freq_pct[j], |
| svsb->volt[0], |
| svsb->volt[j], |
| svsb->freq_pct[i]); |
| } else if (svsb->type == SVSB_LOW) { |
| /* volt[turn_pt] ~ volt[opp_count - 1] */ |
| for (i = turn_pt; i < svsb->opp_count; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| vop = (shift_byte < REG_BYTES) ? &vop30 : |
| &vop74; |
| svsb->volt[i] = (*vop >> b_sft) & GENMASK(7, 0); |
| shift_byte++; |
| } |
| } |
| } |
| |
| if (svsb->type == SVSB_HIGH) { |
| opp_start = 0; |
| opp_stop = svsb->turn_pt; |
| } else if (svsb->type == SVSB_LOW) { |
| opp_start = svsb->turn_pt; |
| opp_stop = svsb->opp_count; |
| } |
| |
| for (i = opp_start; i < opp_stop; i++) |
| if (svsb->volt_flags & SVSB_REMOVE_DVTFIXED_VOLT) |
| svsb->volt[i] -= svsb->dvt_fixed; |
| } |
| |
| static void svs_set_bank_freq_pct_v3(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| u32 i, j, *freq_pct, freq_pct74 = 0, freq_pct30 = 0; |
| u32 b_sft, shift_byte = 0, turn_pt; |
| u32 middle_index = (svsb->opp_count / 2); |
| |
| for (i = 0; i < svsb->opp_count; i++) { |
| if (svsb->opp_dfreq[i] <= svsb->turn_freq_base) { |
| svsb->turn_pt = i; |
| break; |
| } |
| } |
| |
| turn_pt = svsb->turn_pt; |
| |
| /* Target is to fill out freq_pct74 / freq_pct30 by algorithm */ |
| if (turn_pt < middle_index) { |
| if (svsb->type == SVSB_HIGH) { |
| /* |
| * If we don't handle this situation, |
| * SVSB_HIGH's FREQPCT74 / FREQPCT30 would keep "0" |
| * and this leads SVSB_LOW to work abnormally. |
| */ |
| if (turn_pt == 0) |
| freq_pct30 = svsb->freq_pct[0]; |
| |
| /* freq_pct[0] ~ freq_pct[turn_pt - 1] */ |
| for (i = 0; i < turn_pt; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| freq_pct = (shift_byte < REG_BYTES) ? |
| &freq_pct30 : &freq_pct74; |
| *freq_pct |= (svsb->freq_pct[i] << b_sft); |
| shift_byte++; |
| } |
| } else if (svsb->type == SVSB_LOW) { |
| /* |
| * freq_pct[turn_pt] + |
| * freq_pct[opp_count - 7] ~ freq_pct[opp_count -1] |
| */ |
| freq_pct30 = svsb->freq_pct[turn_pt]; |
| shift_byte++; |
| j = svsb->opp_count - 7; |
| for (i = j; i < svsb->opp_count; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| freq_pct = (shift_byte < REG_BYTES) ? |
| &freq_pct30 : &freq_pct74; |
| *freq_pct |= (svsb->freq_pct[i] << b_sft); |
| shift_byte++; |
| } |
| } |
| } else { |
| if (svsb->type == SVSB_HIGH) { |
| /* |
| * freq_pct[0] + |
| * freq_pct[turn_pt - 7] ~ freq_pct[turn_pt - 1] |
| */ |
| freq_pct30 = svsb->freq_pct[0]; |
| shift_byte++; |
| j = turn_pt - 7; |
| for (i = j; i < turn_pt; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| freq_pct = (shift_byte < REG_BYTES) ? |
| &freq_pct30 : &freq_pct74; |
| *freq_pct |= (svsb->freq_pct[i] << b_sft); |
| shift_byte++; |
| } |
| } else if (svsb->type == SVSB_LOW) { |
| /* freq_pct[turn_pt] ~ freq_pct[opp_count - 1] */ |
| for (i = turn_pt; i < svsb->opp_count; i++) { |
| b_sft = BITS8 * (shift_byte % REG_BYTES); |
| freq_pct = (shift_byte < REG_BYTES) ? |
| &freq_pct30 : &freq_pct74; |
| *freq_pct |= (svsb->freq_pct[i] << b_sft); |
| shift_byte++; |
| } |
| } |
| } |
| |
| svs_writel_relaxed(svsp, freq_pct74, FREQPCT74); |
| svs_writel_relaxed(svsp, freq_pct30, FREQPCT30); |
| } |
| |
| static void svs_get_bank_volts_v2(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| u32 temp, i; |
| |
| temp = svs_readl_relaxed(svsp, VOP74); |
| svsb->volt[14] = FIELD_GET(SVSB_VOPS_FLD_VOP3_7, temp); |
| svsb->volt[12] = FIELD_GET(SVSB_VOPS_FLD_VOP2_6, temp); |
| svsb->volt[10] = FIELD_GET(SVSB_VOPS_FLD_VOP1_5, temp); |
| svsb->volt[8] = FIELD_GET(SVSB_VOPS_FLD_VOP0_4, temp); |
| |
| temp = svs_readl_relaxed(svsp, VOP30); |
| svsb->volt[6] = FIELD_GET(SVSB_VOPS_FLD_VOP3_7, temp); |
| svsb->volt[4] = FIELD_GET(SVSB_VOPS_FLD_VOP2_6, temp); |
| svsb->volt[2] = FIELD_GET(SVSB_VOPS_FLD_VOP1_5, temp); |
| svsb->volt[0] = FIELD_GET(SVSB_VOPS_FLD_VOP0_4, temp); |
| |
| for (i = 0; i <= 12; i += 2) |
| svsb->volt[i + 1] = interpolate(svsb->freq_pct[i], |
| svsb->freq_pct[i + 2], |
| svsb->volt[i], |
| svsb->volt[i + 2], |
| svsb->freq_pct[i + 1]); |
| |
| svsb->volt[15] = interpolate(svsb->freq_pct[12], |
| svsb->freq_pct[14], |
| svsb->volt[12], |
| svsb->volt[14], |
| svsb->freq_pct[15]); |
| |
| for (i = 0; i < svsb->opp_count; i++) |
| svsb->volt[i] += svsb->volt_od; |
| } |
| |
| static void svs_set_bank_freq_pct_v2(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| u32 freqpct74_val, freqpct30_val; |
| |
| freqpct74_val = FIELD_PREP(SVSB_FREQPCTS_FLD_PCT0_4, svsb->freq_pct[8]) | |
| FIELD_PREP(SVSB_FREQPCTS_FLD_PCT1_5, svsb->freq_pct[10]) | |
| FIELD_PREP(SVSB_FREQPCTS_FLD_PCT2_6, svsb->freq_pct[12]) | |
| FIELD_PREP(SVSB_FREQPCTS_FLD_PCT3_7, svsb->freq_pct[14]); |
| |
| freqpct30_val = FIELD_PREP(SVSB_FREQPCTS_FLD_PCT0_4, svsb->freq_pct[0]) | |
| FIELD_PREP(SVSB_FREQPCTS_FLD_PCT1_5, svsb->freq_pct[2]) | |
| FIELD_PREP(SVSB_FREQPCTS_FLD_PCT2_6, svsb->freq_pct[4]) | |
| FIELD_PREP(SVSB_FREQPCTS_FLD_PCT3_7, svsb->freq_pct[6]); |
| |
| svs_writel_relaxed(svsp, freqpct74_val, FREQPCT74); |
| svs_writel_relaxed(svsp, freqpct30_val, FREQPCT30); |
| } |
| |
| static void svs_set_bank_phase(struct svs_platform *svsp, |
| enum svsb_phase target_phase) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| u32 des_char, temp_char, det_char, limit_vals, init2vals, ts_calcs; |
| |
| svs_switch_bank(svsp); |
| |
| des_char = FIELD_PREP(SVSB_DESCHAR_FLD_BDES, svsb->bdes) | |
| FIELD_PREP(SVSB_DESCHAR_FLD_MDES, svsb->mdes); |
| svs_writel_relaxed(svsp, des_char, DESCHAR); |
| |
| temp_char = FIELD_PREP(SVSB_TEMPCHAR_FLD_VCO, svsb->vco) | |
| FIELD_PREP(SVSB_TEMPCHAR_FLD_MTDES, svsb->mtdes) | |
| FIELD_PREP(SVSB_TEMPCHAR_FLD_DVT_FIXED, svsb->dvt_fixed); |
| svs_writel_relaxed(svsp, temp_char, TEMPCHAR); |
| |
| det_char = FIELD_PREP(SVSB_DETCHAR_FLD_DCBDET, svsb->dcbdet) | |
| FIELD_PREP(SVSB_DETCHAR_FLD_DCMDET, svsb->dcmdet); |
| svs_writel_relaxed(svsp, det_char, DETCHAR); |
| |
| svs_writel_relaxed(svsp, svsb->dc_config, DCCONFIG); |
| svs_writel_relaxed(svsp, svsb->age_config, AGECONFIG); |
| svs_writel_relaxed(svsp, SVSB_RUNCONFIG_DEFAULT, RUNCONFIG); |
| |
| svsb->set_freq_pct(svsp); |
| |
| limit_vals = FIELD_PREP(SVSB_LIMITVALS_FLD_DTLO, SVSB_VAL_DTLO) | |
| FIELD_PREP(SVSB_LIMITVALS_FLD_DTHI, SVSB_VAL_DTHI) | |
| FIELD_PREP(SVSB_LIMITVALS_FLD_VMIN, svsb->vmin) | |
| FIELD_PREP(SVSB_LIMITVALS_FLD_VMAX, svsb->vmax); |
| svs_writel_relaxed(svsp, limit_vals, LIMITVALS); |
| |
| svs_writel_relaxed(svsp, SVSB_DET_WINDOW, DETWINDOW); |
| svs_writel_relaxed(svsp, SVSB_DET_MAX, CONFIG); |
| svs_writel_relaxed(svsp, svsb->chk_shift, CHKSHIFT); |
| svs_writel_relaxed(svsp, svsb->ctl0, CTL0); |
| svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS); |
| |
| switch (target_phase) { |
| case SVSB_PHASE_INIT01: |
| svs_writel_relaxed(svsp, svsb->vboot, VBOOT); |
| svs_writel_relaxed(svsp, SVSB_INTEN_INIT0x, INTEN); |
| svs_writel_relaxed(svsp, SVSB_PTPEN_INIT01, SVSEN); |
| break; |
| case SVSB_PHASE_INIT02: |
| init2vals = FIELD_PREP(SVSB_INIT2VALS_FLD_AGEVOFFSETIN, svsb->age_voffset_in) | |
| FIELD_PREP(SVSB_INIT2VALS_FLD_DCVOFFSETIN, svsb->dc_voffset_in); |
| svs_writel_relaxed(svsp, SVSB_INTEN_INIT0x, INTEN); |
| svs_writel_relaxed(svsp, init2vals, INIT2VALS); |
| svs_writel_relaxed(svsp, SVSB_PTPEN_INIT02, SVSEN); |
| break; |
| case SVSB_PHASE_MON: |
| ts_calcs = FIELD_PREP(SVSB_TSCALCS_FLD_BTS, svsb->bts) | |
| FIELD_PREP(SVSB_TSCALCS_FLD_MTS, svsb->mts); |
| svs_writel_relaxed(svsp, ts_calcs, TSCALCS); |
| svs_writel_relaxed(svsp, SVSB_INTEN_MONVOPEN, INTEN); |
| svs_writel_relaxed(svsp, SVSB_PTPEN_MON, SVSEN); |
| break; |
| default: |
| dev_err(svsb->dev, "requested unknown target phase: %u\n", |
| target_phase); |
| break; |
| } |
| } |
| |
| static inline void svs_save_bank_register_data(struct svs_platform *svsp, |
| enum svsb_phase phase) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| enum svs_reg_index rg_i; |
| |
| for (rg_i = DESCHAR; rg_i < SVS_REG_MAX; rg_i++) |
| svsb->reg_data[phase][rg_i] = svs_readl_relaxed(svsp, rg_i); |
| } |
| |
| static inline void svs_error_isr_handler(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| |
| dev_err(svsb->dev, "%s: CORESEL = 0x%08x\n", |
| __func__, svs_readl_relaxed(svsp, CORESEL)); |
| dev_err(svsb->dev, "SVSEN = 0x%08x, INTSTS = 0x%08x\n", |
| svs_readl_relaxed(svsp, SVSEN), |
| svs_readl_relaxed(svsp, INTSTS)); |
| dev_err(svsb->dev, "SMSTATE0 = 0x%08x, SMSTATE1 = 0x%08x\n", |
| svs_readl_relaxed(svsp, SMSTATE0), |
| svs_readl_relaxed(svsp, SMSTATE1)); |
| dev_err(svsb->dev, "TEMP = 0x%08x\n", svs_readl_relaxed(svsp, TEMP)); |
| |
| svs_save_bank_register_data(svsp, SVSB_PHASE_ERROR); |
| |
| svsb->phase = SVSB_PHASE_ERROR; |
| svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN); |
| svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS); |
| } |
| |
| static inline void svs_init01_isr_handler(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| |
| dev_info(svsb->dev, "%s: VDN74~30:0x%08x~0x%08x, DC:0x%08x\n", |
| __func__, svs_readl_relaxed(svsp, VDESIGN74), |
| svs_readl_relaxed(svsp, VDESIGN30), |
| svs_readl_relaxed(svsp, DCVALUES)); |
| |
| svs_save_bank_register_data(svsp, SVSB_PHASE_INIT01); |
| |
| svsb->phase = SVSB_PHASE_INIT01; |
| svsb->dc_voffset_in = ~(svs_readl_relaxed(svsp, DCVALUES) & |
| GENMASK(15, 0)) + 1; |
| if (svsb->volt_flags & SVSB_INIT01_VOLT_IGNORE || |
| (svsb->dc_voffset_in & SVSB_DC_SIGNED_BIT && |
| svsb->volt_flags & SVSB_INIT01_VOLT_INC_ONLY)) |
| svsb->dc_voffset_in = 0; |
| |
| svsb->age_voffset_in = svs_readl_relaxed(svsp, AGEVALUES) & |
| GENMASK(15, 0); |
| |
| svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN); |
| svs_writel_relaxed(svsp, SVSB_INTSTS_F0_COMPLETE, INTSTS); |
| svsb->core_sel &= ~SVSB_DET_CLK_EN; |
| } |
| |
| static inline void svs_init02_isr_handler(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| |
| dev_info(svsb->dev, "%s: VOP74~30:0x%08x~0x%08x, DC:0x%08x\n", |
| __func__, svs_readl_relaxed(svsp, VOP74), |
| svs_readl_relaxed(svsp, VOP30), |
| svs_readl_relaxed(svsp, DCVALUES)); |
| |
| svs_save_bank_register_data(svsp, SVSB_PHASE_INIT02); |
| |
| svsb->phase = SVSB_PHASE_INIT02; |
| svsb->get_volts(svsp); |
| |
| svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN); |
| svs_writel_relaxed(svsp, SVSB_INTSTS_F0_COMPLETE, INTSTS); |
| } |
| |
| static inline void svs_mon_mode_isr_handler(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb = svsp->pbank; |
| |
| svs_save_bank_register_data(svsp, SVSB_PHASE_MON); |
| |
| svsb->phase = SVSB_PHASE_MON; |
| svsb->get_volts(svsp); |
| |
| svsb->temp = svs_readl_relaxed(svsp, TEMP) & GENMASK(7, 0); |
| svs_writel_relaxed(svsp, SVSB_INTSTS_FLD_MONVOP, INTSTS); |
| } |
| |
| static irqreturn_t svs_isr(int irq, void *data) |
| { |
| struct svs_platform *svsp = data; |
| struct svs_bank *svsb = NULL; |
| unsigned long flags; |
| u32 idx, int_sts, svs_en; |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| WARN(!svsb, "%s: svsb(%s) is null", __func__, svsb->name); |
| |
| spin_lock_irqsave(&svs_lock, flags); |
| svsp->pbank = svsb; |
| |
| /* Find out which svs bank fires interrupt */ |
| if (svsb->int_st & svs_readl_relaxed(svsp, INTST)) { |
| spin_unlock_irqrestore(&svs_lock, flags); |
| continue; |
| } |
| |
| svs_switch_bank(svsp); |
| int_sts = svs_readl_relaxed(svsp, INTSTS); |
| svs_en = svs_readl_relaxed(svsp, SVSEN); |
| |
| if (int_sts == SVSB_INTSTS_F0_COMPLETE && |
| svs_en == SVSB_PTPEN_INIT01) |
| svs_init01_isr_handler(svsp); |
| else if (int_sts == SVSB_INTSTS_F0_COMPLETE && |
| svs_en == SVSB_PTPEN_INIT02) |
| svs_init02_isr_handler(svsp); |
| else if (int_sts & SVSB_INTSTS_FLD_MONVOP) |
| svs_mon_mode_isr_handler(svsp); |
| else |
| svs_error_isr_handler(svsp); |
| |
| spin_unlock_irqrestore(&svs_lock, flags); |
| break; |
| } |
| |
| svs_adjust_pm_opp_volts(svsb); |
| |
| if (svsb->phase == SVSB_PHASE_INIT01 || |
| svsb->phase == SVSB_PHASE_INIT02) |
| complete(&svsb->init_completion); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int svs_init01(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb; |
| unsigned long flags, time_left; |
| bool search_done; |
| int ret = 0, r; |
| u32 opp_freq, opp_vboot, buck_volt, idx, i; |
| |
| /* Keep CPUs' core power on for svs_init01 initialization */ |
| cpuidle_pause_and_lock(); |
| |
| /* Svs bank init01 preparation - power enable */ |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (!(svsb->mode_support & SVSB_MODE_INIT01)) |
| continue; |
| |
| ret = regulator_enable(svsb->buck); |
| if (ret) { |
| dev_err(svsb->dev, "%s enable fail: %d\n", |
| svsb->buck_name, ret); |
| goto svs_init01_resume_cpuidle; |
| } |
| |
| /* Some buck doesn't support mode change. Show fail msg only */ |
| ret = regulator_set_mode(svsb->buck, REGULATOR_MODE_FAST); |
| if (ret) |
| dev_notice(svsb->dev, "set fast mode fail: %d\n", ret); |
| |
| if (svsb->volt_flags & SVSB_INIT01_PD_REQ) { |
| if (!pm_runtime_enabled(svsb->opp_dev)) { |
| pm_runtime_enable(svsb->opp_dev); |
| svsb->pm_runtime_enabled_count++; |
| } |
| |
| ret = pm_runtime_get_sync(svsb->opp_dev); |
| if (ret < 0) { |
| dev_err(svsb->dev, "mtcmos on fail: %d\n", ret); |
| goto svs_init01_resume_cpuidle; |
| } |
| } |
| } |
| |
| /* |
| * Svs bank init01 preparation - vboot voltage adjustment |
| * Sometimes two svs banks use the same buck. Therefore, |
| * we have to set each svs bank to target voltage(vboot) first. |
| */ |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (!(svsb->mode_support & SVSB_MODE_INIT01)) |
| continue; |
| |
| /* |
| * Find the fastest freq that can be run at vboot and |
| * fix to that freq until svs_init01 is done. |
| */ |
| search_done = false; |
| opp_vboot = svs_bank_volt_to_opp_volt(svsb->vboot, |
| svsb->volt_step, |
| svsb->volt_base); |
| |
| for (i = 0; i < svsb->opp_count; i++) { |
| opp_freq = svsb->opp_dfreq[i]; |
| if (!search_done && svsb->opp_dvolt[i] <= opp_vboot) { |
| ret = dev_pm_opp_adjust_voltage(svsb->opp_dev, |
| opp_freq, |
| opp_vboot, |
| opp_vboot, |
| opp_vboot); |
| if (ret) { |
| dev_err(svsb->dev, |
| "set opp %uuV vboot fail: %d\n", |
| opp_vboot, ret); |
| goto svs_init01_finish; |
| } |
| |
| search_done = true; |
| } else { |
| ret = dev_pm_opp_disable(svsb->opp_dev, |
| svsb->opp_dfreq[i]); |
| if (ret) { |
| dev_err(svsb->dev, |
| "opp %uHz disable fail: %d\n", |
| svsb->opp_dfreq[i], ret); |
| goto svs_init01_finish; |
| } |
| } |
| } |
| } |
| |
| /* Svs bank init01 begins */ |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (!(svsb->mode_support & SVSB_MODE_INIT01)) |
| continue; |
| |
| opp_vboot = svs_bank_volt_to_opp_volt(svsb->vboot, |
| svsb->volt_step, |
| svsb->volt_base); |
| |
| buck_volt = regulator_get_voltage(svsb->buck); |
| if (buck_volt != opp_vboot) { |
| dev_err(svsb->dev, |
| "buck voltage: %uuV, expected vboot: %uuV\n", |
| buck_volt, opp_vboot); |
| ret = -EPERM; |
| goto svs_init01_finish; |
| } |
| |
| spin_lock_irqsave(&svs_lock, flags); |
| svsp->pbank = svsb; |
| svs_set_bank_phase(svsp, SVSB_PHASE_INIT01); |
| spin_unlock_irqrestore(&svs_lock, flags); |
| |
| time_left = wait_for_completion_timeout(&svsb->init_completion, |
| msecs_to_jiffies(5000)); |
| if (!time_left) { |
| dev_err(svsb->dev, "init01 completion timeout\n"); |
| ret = -EBUSY; |
| goto svs_init01_finish; |
| } |
| } |
| |
| svs_init01_finish: |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (!(svsb->mode_support & SVSB_MODE_INIT01)) |
| continue; |
| |
| for (i = 0; i < svsb->opp_count; i++) { |
| r = dev_pm_opp_enable(svsb->opp_dev, |
| svsb->opp_dfreq[i]); |
| if (r) |
| dev_err(svsb->dev, "opp %uHz enable fail: %d\n", |
| svsb->opp_dfreq[i], r); |
| } |
| |
| if (svsb->volt_flags & SVSB_INIT01_PD_REQ) { |
| r = pm_runtime_put_sync(svsb->opp_dev); |
| if (r) |
| dev_err(svsb->dev, "mtcmos off fail: %d\n", r); |
| |
| if (svsb->pm_runtime_enabled_count > 0) { |
| pm_runtime_disable(svsb->opp_dev); |
| svsb->pm_runtime_enabled_count--; |
| } |
| } |
| |
| r = regulator_set_mode(svsb->buck, REGULATOR_MODE_NORMAL); |
| if (r) |
| dev_notice(svsb->dev, "set normal mode fail: %d\n", r); |
| |
| r = regulator_disable(svsb->buck); |
| if (r) |
| dev_err(svsb->dev, "%s disable fail: %d\n", |
| svsb->buck_name, r); |
| } |
| |
| svs_init01_resume_cpuidle: |
| cpuidle_resume_and_unlock(); |
| |
| return ret; |
| } |
| |
| static int svs_init02(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb; |
| unsigned long flags, time_left; |
| u32 idx; |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (!(svsb->mode_support & SVSB_MODE_INIT02)) |
| continue; |
| |
| reinit_completion(&svsb->init_completion); |
| spin_lock_irqsave(&svs_lock, flags); |
| svsp->pbank = svsb; |
| svs_set_bank_phase(svsp, SVSB_PHASE_INIT02); |
| spin_unlock_irqrestore(&svs_lock, flags); |
| |
| time_left = wait_for_completion_timeout(&svsb->init_completion, |
| msecs_to_jiffies(5000)); |
| if (!time_left) { |
| dev_err(svsb->dev, "init02 completion timeout\n"); |
| return -EBUSY; |
| } |
| } |
| |
| /* |
| * 2-line high/low bank update its corresponding opp voltages only. |
| * Therefore, we sync voltages from opp for high/low bank voltages |
| * consistency. |
| */ |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (!(svsb->mode_support & SVSB_MODE_INIT02)) |
| continue; |
| |
| if (svsb->type == SVSB_HIGH || svsb->type == SVSB_LOW) { |
| if (svs_sync_bank_volts_from_opp(svsb)) { |
| dev_err(svsb->dev, "sync volt fail\n"); |
| return -EPERM; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void svs_mon_mode(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb; |
| unsigned long flags; |
| u32 idx; |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (!(svsb->mode_support & SVSB_MODE_MON)) |
| continue; |
| |
| spin_lock_irqsave(&svs_lock, flags); |
| svsp->pbank = svsb; |
| svs_set_bank_phase(svsp, SVSB_PHASE_MON); |
| spin_unlock_irqrestore(&svs_lock, flags); |
| } |
| } |
| |
| static int svs_start(struct svs_platform *svsp) |
| { |
| int ret; |
| |
| ret = svs_init01(svsp); |
| if (ret) |
| return ret; |
| |
| ret = svs_init02(svsp); |
| if (ret) |
| return ret; |
| |
| svs_mon_mode(svsp); |
| |
| return 0; |
| } |
| |
| static int svs_suspend(struct device *dev) |
| { |
| struct svs_platform *svsp = dev_get_drvdata(dev); |
| struct svs_bank *svsb; |
| unsigned long flags; |
| int ret; |
| u32 idx; |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| /* This might wait for svs_isr() process */ |
| spin_lock_irqsave(&svs_lock, flags); |
| svsp->pbank = svsb; |
| svs_switch_bank(svsp); |
| svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN); |
| svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS); |
| spin_unlock_irqrestore(&svs_lock, flags); |
| |
| svsb->phase = SVSB_PHASE_ERROR; |
| svs_adjust_pm_opp_volts(svsb); |
| } |
| |
| ret = reset_control_assert(svsp->rst); |
| if (ret) { |
| dev_err(svsp->dev, "cannot assert reset %d\n", ret); |
| return ret; |
| } |
| |
| clk_disable_unprepare(svsp->main_clk); |
| |
| return 0; |
| } |
| |
| static int svs_resume(struct device *dev) |
| { |
| struct svs_platform *svsp = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = clk_prepare_enable(svsp->main_clk); |
| if (ret) { |
| dev_err(svsp->dev, "cannot enable main_clk, disable svs\n"); |
| return ret; |
| } |
| |
| ret = reset_control_deassert(svsp->rst); |
| if (ret) { |
| dev_err(svsp->dev, "cannot deassert reset %d\n", ret); |
| goto out_of_resume; |
| } |
| |
| ret = svs_init02(svsp); |
| if (ret) |
| goto out_of_resume; |
| |
| svs_mon_mode(svsp); |
| |
| return 0; |
| |
| out_of_resume: |
| clk_disable_unprepare(svsp->main_clk); |
| return ret; |
| } |
| |
| static int svs_bank_resource_setup(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb; |
| struct dev_pm_opp *opp; |
| unsigned long freq; |
| int count, ret; |
| u32 idx, i; |
| |
| dev_set_drvdata(svsp->dev, svsp); |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| switch (svsb->sw_id) { |
| case SVSB_CPU_LITTLE: |
| svsb->name = "SVSB_CPU_LITTLE"; |
| break; |
| case SVSB_CPU_BIG: |
| svsb->name = "SVSB_CPU_BIG"; |
| break; |
| case SVSB_CCI: |
| svsb->name = "SVSB_CCI"; |
| break; |
| case SVSB_GPU: |
| if (svsb->type == SVSB_HIGH) |
| svsb->name = "SVSB_GPU_HIGH"; |
| else if (svsb->type == SVSB_LOW) |
| svsb->name = "SVSB_GPU_LOW"; |
| else |
| svsb->name = "SVSB_GPU"; |
| break; |
| default: |
| dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id); |
| return -EINVAL; |
| } |
| |
| svsb->dev = devm_kzalloc(svsp->dev, sizeof(*svsb->dev), |
| GFP_KERNEL); |
| if (!svsb->dev) |
| return -ENOMEM; |
| |
| ret = dev_set_name(svsb->dev, "%s", svsb->name); |
| if (ret) |
| return ret; |
| |
| dev_set_drvdata(svsb->dev, svsp); |
| |
| ret = devm_pm_opp_of_add_table(svsb->opp_dev); |
| if (ret) { |
| dev_err(svsb->dev, "add opp table fail: %d\n", ret); |
| return ret; |
| } |
| |
| mutex_init(&svsb->lock); |
| init_completion(&svsb->init_completion); |
| |
| if (svsb->mode_support & SVSB_MODE_INIT01) { |
| svsb->buck = devm_regulator_get_optional(svsb->opp_dev, |
| svsb->buck_name); |
| if (IS_ERR(svsb->buck)) { |
| dev_err(svsb->dev, "cannot get \"%s-supply\"\n", |
| svsb->buck_name); |
| return PTR_ERR(svsb->buck); |
| } |
| } |
| |
| if (svsb->mode_support & SVSB_MODE_MON) { |
| svsb->tzd = thermal_zone_get_zone_by_name(svsb->tzone_name); |
| if (IS_ERR(svsb->tzd)) { |
| dev_err(svsb->dev, "cannot get \"%s\" thermal zone\n", |
| svsb->tzone_name); |
| return PTR_ERR(svsb->tzd); |
| } |
| } |
| |
| count = dev_pm_opp_get_opp_count(svsb->opp_dev); |
| if (svsb->opp_count != count) { |
| dev_err(svsb->dev, |
| "opp_count not \"%u\" but get \"%d\"?\n", |
| svsb->opp_count, count); |
| return count; |
| } |
| |
| for (i = 0, freq = U32_MAX; i < svsb->opp_count; i++, freq--) { |
| opp = dev_pm_opp_find_freq_floor(svsb->opp_dev, &freq); |
| if (IS_ERR(opp)) { |
| dev_err(svsb->dev, "cannot find freq = %ld\n", |
| PTR_ERR(opp)); |
| return PTR_ERR(opp); |
| } |
| |
| svsb->opp_dfreq[i] = freq; |
| svsb->opp_dvolt[i] = dev_pm_opp_get_voltage(opp); |
| svsb->freq_pct[i] = percent(svsb->opp_dfreq[i], |
| svsb->freq_base); |
| dev_pm_opp_put(opp); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int svs_thermal_efuse_get_data(struct svs_platform *svsp) |
| { |
| struct nvmem_cell *cell; |
| |
| /* Thermal efuse parsing */ |
| cell = nvmem_cell_get(svsp->dev, "t-calibration-data"); |
| if (IS_ERR_OR_NULL(cell)) { |
| dev_err(svsp->dev, "no \"t-calibration-data\"? %ld\n", PTR_ERR(cell)); |
| return PTR_ERR(cell); |
| } |
| |
| svsp->tefuse = nvmem_cell_read(cell, &svsp->tefuse_max); |
| if (IS_ERR(svsp->tefuse)) { |
| dev_err(svsp->dev, "cannot read thermal efuse: %ld\n", |
| PTR_ERR(svsp->tefuse)); |
| nvmem_cell_put(cell); |
| return PTR_ERR(svsp->tefuse); |
| } |
| |
| svsp->tefuse_max /= sizeof(u32); |
| nvmem_cell_put(cell); |
| |
| return 0; |
| } |
| |
| static bool svs_mt8192_efuse_parsing(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb; |
| u32 idx, i, vmin, golden_temp; |
| int ret; |
| |
| for (i = 0; i < svsp->efuse_max; i++) |
| if (svsp->efuse[i]) |
| dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n", |
| i, svsp->efuse[i]); |
| |
| if (!svsp->efuse[9]) { |
| dev_notice(svsp->dev, "svs_efuse[9] = 0x0?\n"); |
| return false; |
| } |
| |
| /* Svs efuse parsing */ |
| vmin = (svsp->efuse[19] >> 4) & GENMASK(1, 0); |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (vmin == 0x1) |
| svsb->vmin = 0x1e; |
| |
| if (svsb->type == SVSB_LOW) { |
| svsb->mtdes = svsp->efuse[10] & GENMASK(7, 0); |
| svsb->bdes = (svsp->efuse[10] >> 16) & GENMASK(7, 0); |
| svsb->mdes = (svsp->efuse[10] >> 24) & GENMASK(7, 0); |
| svsb->dcbdet = (svsp->efuse[17]) & GENMASK(7, 0); |
| svsb->dcmdet = (svsp->efuse[17] >> 8) & GENMASK(7, 0); |
| } else if (svsb->type == SVSB_HIGH) { |
| svsb->mtdes = svsp->efuse[9] & GENMASK(7, 0); |
| svsb->bdes = (svsp->efuse[9] >> 16) & GENMASK(7, 0); |
| svsb->mdes = (svsp->efuse[9] >> 24) & GENMASK(7, 0); |
| svsb->dcbdet = (svsp->efuse[17] >> 16) & GENMASK(7, 0); |
| svsb->dcmdet = (svsp->efuse[17] >> 24) & GENMASK(7, 0); |
| } |
| |
| svsb->vmax += svsb->dvt_fixed; |
| } |
| |
| ret = svs_thermal_efuse_get_data(svsp); |
| if (ret) |
| return false; |
| |
| for (i = 0; i < svsp->tefuse_max; i++) |
| if (svsp->tefuse[i] != 0) |
| break; |
| |
| if (i == svsp->tefuse_max) |
| golden_temp = 50; /* All thermal efuse data are 0 */ |
| else |
| golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0); |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| svsb->mts = 500; |
| svsb->bts = (((500 * golden_temp + 250460) / 1000) - 25) * 4; |
| } |
| |
| return true; |
| } |
| |
| static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp) |
| { |
| struct svs_bank *svsb; |
| int format[6], x_roomt[6], o_vtsmcu[5], o_vtsabb, tb_roomt = 0; |
| int adc_ge_t, adc_oe_t, ge, oe, gain, degc_cali, adc_cali_en_t; |
| int o_slope, o_slope_sign, ts_id; |
| u32 idx, i, ft_pgm, mts, temp0, temp1, temp2; |
| int ret; |
| |
| for (i = 0; i < svsp->efuse_max; i++) |
| if (svsp->efuse[i]) |
| dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n", |
| i, svsp->efuse[i]); |
| |
| if (!svsp->efuse[2]) { |
| dev_notice(svsp->dev, "svs_efuse[2] = 0x0?\n"); |
| return false; |
| } |
| |
| /* Svs efuse parsing */ |
| ft_pgm = (svsp->efuse[0] >> 4) & GENMASK(3, 0); |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (ft_pgm <= 1) |
| svsb->volt_flags |= SVSB_INIT01_VOLT_IGNORE; |
| |
| switch (svsb->sw_id) { |
| case SVSB_CPU_LITTLE: |
| svsb->bdes = svsp->efuse[16] & GENMASK(7, 0); |
| svsb->mdes = (svsp->efuse[16] >> 8) & GENMASK(7, 0); |
| svsb->dcbdet = (svsp->efuse[16] >> 16) & GENMASK(7, 0); |
| svsb->dcmdet = (svsp->efuse[16] >> 24) & GENMASK(7, 0); |
| svsb->mtdes = (svsp->efuse[17] >> 16) & GENMASK(7, 0); |
| |
| if (ft_pgm <= 3) |
| svsb->volt_od += 10; |
| else |
| svsb->volt_od += 2; |
| break; |
| case SVSB_CPU_BIG: |
| svsb->bdes = svsp->efuse[18] & GENMASK(7, 0); |
| svsb->mdes = (svsp->efuse[18] >> 8) & GENMASK(7, 0); |
| svsb->dcbdet = (svsp->efuse[18] >> 16) & GENMASK(7, 0); |
| svsb->dcmdet = (svsp->efuse[18] >> 24) & GENMASK(7, 0); |
| svsb->mtdes = svsp->efuse[17] & GENMASK(7, 0); |
| |
| if (ft_pgm <= 3) |
| svsb->volt_od += 15; |
| else |
| svsb->volt_od += 12; |
| break; |
| case SVSB_CCI: |
| svsb->bdes = svsp->efuse[4] & GENMASK(7, 0); |
| svsb->mdes = (svsp->efuse[4] >> 8) & GENMASK(7, 0); |
| svsb->dcbdet = (svsp->efuse[4] >> 16) & GENMASK(7, 0); |
| svsb->dcmdet = (svsp->efuse[4] >> 24) & GENMASK(7, 0); |
| svsb->mtdes = (svsp->efuse[5] >> 16) & GENMASK(7, 0); |
| |
| if (ft_pgm <= 3) |
| svsb->volt_od += 10; |
| else |
| svsb->volt_od += 2; |
| break; |
| case SVSB_GPU: |
| svsb->bdes = svsp->efuse[6] & GENMASK(7, 0); |
| svsb->mdes = (svsp->efuse[6] >> 8) & GENMASK(7, 0); |
| svsb->dcbdet = (svsp->efuse[6] >> 16) & GENMASK(7, 0); |
| svsb->dcmdet = (svsp->efuse[6] >> 24) & GENMASK(7, 0); |
| svsb->mtdes = svsp->efuse[5] & GENMASK(7, 0); |
| |
| if (ft_pgm >= 2) { |
| svsb->freq_base = 800000000; /* 800MHz */ |
| svsb->dvt_fixed = 2; |
| } |
| break; |
| default: |
| dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id); |
| return false; |
| } |
| } |
| |
| ret = svs_thermal_efuse_get_data(svsp); |
| if (ret) |
| return false; |
| |
| /* Thermal efuse parsing */ |
| adc_ge_t = (svsp->tefuse[1] >> 22) & GENMASK(9, 0); |
| adc_oe_t = (svsp->tefuse[1] >> 12) & GENMASK(9, 0); |
| |
| o_vtsmcu[0] = (svsp->tefuse[0] >> 17) & GENMASK(8, 0); |
| o_vtsmcu[1] = (svsp->tefuse[0] >> 8) & GENMASK(8, 0); |
| o_vtsmcu[2] = svsp->tefuse[1] & GENMASK(8, 0); |
| o_vtsmcu[3] = (svsp->tefuse[2] >> 23) & GENMASK(8, 0); |
| o_vtsmcu[4] = (svsp->tefuse[2] >> 5) & GENMASK(8, 0); |
| o_vtsabb = (svsp->tefuse[2] >> 14) & GENMASK(8, 0); |
| |
| degc_cali = (svsp->tefuse[0] >> 1) & GENMASK(5, 0); |
| adc_cali_en_t = svsp->tefuse[0] & BIT(0); |
| o_slope_sign = (svsp->tefuse[0] >> 7) & BIT(0); |
| |
| ts_id = (svsp->tefuse[1] >> 9) & BIT(0); |
| o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0); |
| |
| if (adc_cali_en_t == 1) { |
| if (!ts_id) |
| o_slope = 0; |
| |
| if (adc_ge_t < 265 || adc_ge_t > 758 || |
| adc_oe_t < 265 || adc_oe_t > 758 || |
| o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 || |
| o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 || |
| o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 || |
| o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 || |
| o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 || |
| o_vtsabb < -8 || o_vtsabb > 484 || |
| degc_cali < 1 || degc_cali > 63) { |
| dev_err(svsp->dev, "bad thermal efuse, no mon mode\n"); |
| goto remove_mt8183_svsb_mon_mode; |
| } |
| } else { |
| dev_err(svsp->dev, "no thermal efuse, no mon mode\n"); |
| goto remove_mt8183_svsb_mon_mode; |
| } |
| |
| ge = ((adc_ge_t - 512) * 10000) / 4096; |
| oe = (adc_oe_t - 512); |
| gain = (10000 + ge); |
| |
| format[0] = (o_vtsmcu[0] + 3350 - oe); |
| format[1] = (o_vtsmcu[1] + 3350 - oe); |
| format[2] = (o_vtsmcu[2] + 3350 - oe); |
| format[3] = (o_vtsmcu[3] + 3350 - oe); |
| format[4] = (o_vtsmcu[4] + 3350 - oe); |
| format[5] = (o_vtsabb + 3350 - oe); |
| |
| for (i = 0; i < 6; i++) |
| x_roomt[i] = (((format[i] * 10000) / 4096) * 10000) / gain; |
| |
| temp0 = (10000 * 100000 / gain) * 15 / 18; |
| |
| if (!o_slope_sign) |
| mts = (temp0 * 10) / (1534 + o_slope * 10); |
| else |
| mts = (temp0 * 10) / (1534 - o_slope * 10); |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| svsb->mts = mts; |
| |
| switch (svsb->sw_id) { |
| case SVSB_CPU_LITTLE: |
| tb_roomt = x_roomt[3]; |
| break; |
| case SVSB_CPU_BIG: |
| tb_roomt = x_roomt[4]; |
| break; |
| case SVSB_CCI: |
| tb_roomt = x_roomt[3]; |
| break; |
| case SVSB_GPU: |
| tb_roomt = x_roomt[1]; |
| break; |
| default: |
| dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id); |
| goto remove_mt8183_svsb_mon_mode; |
| } |
| |
| temp0 = (degc_cali * 10 / 2); |
| temp1 = ((10000 * 100000 / 4096 / gain) * |
| oe + tb_roomt * 10) * 15 / 18; |
| |
| if (!o_slope_sign) |
| temp2 = temp1 * 100 / (1534 + o_slope * 10); |
| else |
| temp2 = temp1 * 100 / (1534 - o_slope * 10); |
| |
| svsb->bts = (temp0 + temp2 - 250) * 4 / 10; |
| } |
| |
| return true; |
| |
| remove_mt8183_svsb_mon_mode: |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| svsb->mode_support &= ~SVSB_MODE_MON; |
| } |
| |
| return true; |
| } |
| |
| static bool svs_is_efuse_data_correct(struct svs_platform *svsp) |
| { |
| struct nvmem_cell *cell; |
| |
| /* Get svs efuse by nvmem */ |
| cell = nvmem_cell_get(svsp->dev, "svs-calibration-data"); |
| if (IS_ERR(cell)) { |
| dev_err(svsp->dev, "no \"svs-calibration-data\"? %ld\n", |
| PTR_ERR(cell)); |
| return false; |
| } |
| |
| svsp->efuse = nvmem_cell_read(cell, &svsp->efuse_max); |
| if (IS_ERR(svsp->efuse)) { |
| dev_err(svsp->dev, "cannot read svs efuse: %ld\n", |
| PTR_ERR(svsp->efuse)); |
| nvmem_cell_put(cell); |
| return false; |
| } |
| |
| svsp->efuse_max /= sizeof(u32); |
| nvmem_cell_put(cell); |
| |
| return svsp->efuse_parsing(svsp); |
| } |
| |
| static struct device *svs_get_subsys_device(struct svs_platform *svsp, |
| const char *node_name) |
| { |
| struct platform_device *pdev; |
| struct device_node *np; |
| |
| np = of_find_node_by_name(NULL, node_name); |
| if (!np) { |
| dev_err(svsp->dev, "cannot find %s node\n", node_name); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| pdev = of_find_device_by_node(np); |
| if (!pdev) { |
| of_node_put(np); |
| dev_err(svsp->dev, "cannot find pdev by %s\n", node_name); |
| return ERR_PTR(-ENXIO); |
| } |
| |
| of_node_put(np); |
| |
| return &pdev->dev; |
| } |
| |
| static struct device *svs_add_device_link(struct svs_platform *svsp, |
| const char *node_name) |
| { |
| struct device *dev; |
| struct device_link *sup_link; |
| |
| if (!node_name) { |
| dev_err(svsp->dev, "node name cannot be null\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| dev = svs_get_subsys_device(svsp, node_name); |
| if (IS_ERR(dev)) |
| return dev; |
| |
| sup_link = device_link_add(svsp->dev, dev, |
| DL_FLAG_AUTOREMOVE_CONSUMER); |
| if (!sup_link) { |
| dev_err(svsp->dev, "sup_link is NULL\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (sup_link->supplier->links.status != DL_DEV_DRIVER_BOUND) |
| return ERR_PTR(-EPROBE_DEFER); |
| |
| return dev; |
| } |
| |
| static int svs_mt8192_platform_probe(struct svs_platform *svsp) |
| { |
| struct device *dev; |
| struct svs_bank *svsb; |
| u32 idx; |
| |
| svsp->rst = devm_reset_control_get_optional(svsp->dev, "svs_rst"); |
| if (IS_ERR(svsp->rst)) |
| return dev_err_probe(svsp->dev, PTR_ERR(svsp->rst), |
| "cannot get svs reset control\n"); |
| |
| dev = svs_add_device_link(svsp, "lvts"); |
| if (IS_ERR(dev)) |
| return dev_err_probe(svsp->dev, PTR_ERR(dev), |
| "failed to get lvts device\n"); |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| if (svsb->type == SVSB_HIGH) |
| svsb->opp_dev = svs_add_device_link(svsp, "mali"); |
| else if (svsb->type == SVSB_LOW) |
| svsb->opp_dev = svs_get_subsys_device(svsp, "mali"); |
| |
| if (IS_ERR(svsb->opp_dev)) |
| return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev), |
| "failed to get OPP device for bank %d\n", |
| idx); |
| } |
| |
| return 0; |
| } |
| |
| static int svs_mt8183_platform_probe(struct svs_platform *svsp) |
| { |
| struct device *dev; |
| struct svs_bank *svsb; |
| u32 idx; |
| |
| dev = svs_add_device_link(svsp, "thermal"); |
| if (IS_ERR(dev)) |
| return dev_err_probe(svsp->dev, PTR_ERR(dev), |
| "failed to get thermal device\n"); |
| |
| for (idx = 0; idx < svsp->bank_max; idx++) { |
| svsb = &svsp->banks[idx]; |
| |
| switch (svsb->sw_id) { |
| case SVSB_CPU_LITTLE: |
| case SVSB_CPU_BIG: |
| svsb->opp_dev = get_cpu_device(svsb->cpu_id); |
| break; |
| case SVSB_CCI: |
| svsb->opp_dev = svs_add_device_link(svsp, "cci"); |
| break; |
| case SVSB_GPU: |
| svsb->opp_dev = svs_add_device_link(svsp, "gpu"); |
| break; |
| default: |
| dev_err(svsb->dev, "unknown sw_id: %u\n", svsb->sw_id); |
| return -EINVAL; |
| } |
| |
| if (IS_ERR(svsb->opp_dev)) |
| return dev_err_probe(svsp->dev, PTR_ERR(svsb->opp_dev), |
| "failed to get OPP device for bank %d\n", |
| idx); |
| } |
| |
| return 0; |
| } |
| |
| static struct svs_bank svs_mt8192_banks[] = { |
| { |
| .sw_id = SVSB_GPU, |
| .type = SVSB_LOW, |
| .set_freq_pct = svs_set_bank_freq_pct_v3, |
| .get_volts = svs_get_bank_volts_v3, |
| .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT, |
| .mode_support = SVSB_MODE_INIT02, |
| .opp_count = MAX_OPP_ENTRIES, |
| .freq_base = 688000000, |
| .turn_freq_base = 688000000, |
| .volt_step = 6250, |
| .volt_base = 400000, |
| .vmax = 0x60, |
| .vmin = 0x1a, |
| .age_config = 0x555555, |
| .dc_config = 0x1, |
| .dvt_fixed = 0x1, |
| .vco = 0x18, |
| .chk_shift = 0x87, |
| .core_sel = 0x0fff0100, |
| .int_st = BIT(0), |
| .ctl0 = 0x00540003, |
| }, |
| { |
| .sw_id = SVSB_GPU, |
| .type = SVSB_HIGH, |
| .set_freq_pct = svs_set_bank_freq_pct_v3, |
| .get_volts = svs_get_bank_volts_v3, |
| .tzone_name = "gpu1", |
| .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT | |
| SVSB_MON_VOLT_IGNORE, |
| .mode_support = SVSB_MODE_INIT02 | SVSB_MODE_MON, |
| .opp_count = MAX_OPP_ENTRIES, |
| .freq_base = 902000000, |
| .turn_freq_base = 688000000, |
| .volt_step = 6250, |
| .volt_base = 400000, |
| .vmax = 0x60, |
| .vmin = 0x1a, |
| .age_config = 0x555555, |
| .dc_config = 0x1, |
| .dvt_fixed = 0x6, |
| .vco = 0x18, |
| .chk_shift = 0x87, |
| .core_sel = 0x0fff0101, |
| .int_st = BIT(1), |
| .ctl0 = 0x00540003, |
| .tzone_htemp = 85000, |
| .tzone_htemp_voffset = 0, |
| .tzone_ltemp = 25000, |
| .tzone_ltemp_voffset = 7, |
| }, |
| }; |
| |
| static struct svs_bank svs_mt8183_banks[] = { |
| { |
| .sw_id = SVSB_CPU_LITTLE, |
| .set_freq_pct = svs_set_bank_freq_pct_v2, |
| .get_volts = svs_get_bank_volts_v2, |
| .cpu_id = 0, |
| .buck_name = "proc", |
| .volt_flags = SVSB_INIT01_VOLT_INC_ONLY, |
| .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02, |
| .opp_count = MAX_OPP_ENTRIES, |
| .freq_base = 1989000000, |
| .vboot = 0x30, |
| .volt_step = 6250, |
| .volt_base = 500000, |
| .vmax = 0x64, |
| .vmin = 0x18, |
| .age_config = 0x555555, |
| .dc_config = 0x555555, |
| .dvt_fixed = 0x7, |
| .vco = 0x10, |
| .chk_shift = 0x77, |
| .core_sel = 0x8fff0000, |
| .int_st = BIT(0), |
| .ctl0 = 0x00010001, |
| }, |
| { |
| .sw_id = SVSB_CPU_BIG, |
| .set_freq_pct = svs_set_bank_freq_pct_v2, |
| .get_volts = svs_get_bank_volts_v2, |
| .cpu_id = 4, |
| .buck_name = "proc", |
| .volt_flags = SVSB_INIT01_VOLT_INC_ONLY, |
| .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02, |
| .opp_count = MAX_OPP_ENTRIES, |
| .freq_base = 1989000000, |
| .vboot = 0x30, |
| .volt_step = 6250, |
| .volt_base = 500000, |
| .vmax = 0x58, |
| .vmin = 0x10, |
| .age_config = 0x555555, |
| .dc_config = 0x555555, |
| .dvt_fixed = 0x7, |
| .vco = 0x10, |
| .chk_shift = 0x77, |
| .core_sel = 0x8fff0001, |
| .int_st = BIT(1), |
| .ctl0 = 0x00000001, |
| }, |
| { |
| .sw_id = SVSB_CCI, |
| .set_freq_pct = svs_set_bank_freq_pct_v2, |
| .get_volts = svs_get_bank_volts_v2, |
| .buck_name = "proc", |
| .volt_flags = SVSB_INIT01_VOLT_INC_ONLY, |
| .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02, |
| .opp_count = MAX_OPP_ENTRIES, |
| .freq_base = 1196000000, |
| .vboot = 0x30, |
| .volt_step = 6250, |
| .volt_base = 500000, |
| .vmax = 0x64, |
| .vmin = 0x18, |
| .age_config = 0x555555, |
| .dc_config = 0x555555, |
| .dvt_fixed = 0x7, |
| .vco = 0x10, |
| .chk_shift = 0x77, |
| .core_sel = 0x8fff0002, |
| .int_st = BIT(2), |
| .ctl0 = 0x00100003, |
| }, |
| { |
| .sw_id = SVSB_GPU, |
| .set_freq_pct = svs_set_bank_freq_pct_v2, |
| .get_volts = svs_get_bank_volts_v2, |
| .buck_name = "mali", |
| .tzone_name = "tzts2", |
| .volt_flags = SVSB_INIT01_PD_REQ | |
| SVSB_INIT01_VOLT_INC_ONLY, |
| .mode_support = SVSB_MODE_INIT01 | SVSB_MODE_INIT02 | |
| SVSB_MODE_MON, |
| .opp_count = MAX_OPP_ENTRIES, |
| .freq_base = 900000000, |
| .vboot = 0x30, |
| .volt_step = 6250, |
| .volt_base = 500000, |
| .vmax = 0x40, |
| .vmin = 0x14, |
| .age_config = 0x555555, |
| .dc_config = 0x555555, |
| .dvt_fixed = 0x3, |
| .vco = 0x10, |
| .chk_shift = 0x77, |
| .core_sel = 0x8fff0003, |
| .int_st = BIT(3), |
| .ctl0 = 0x00050001, |
| .tzone_htemp = 85000, |
| .tzone_htemp_voffset = 0, |
| .tzone_ltemp = 25000, |
| .tzone_ltemp_voffset = 3, |
| }, |
| }; |
| |
| static const struct svs_platform_data svs_mt8192_platform_data = { |
| .name = "mt8192-svs", |
| .banks = svs_mt8192_banks, |
| .efuse_parsing = svs_mt8192_efuse_parsing, |
| .probe = svs_mt8192_platform_probe, |
| .regs = svs_regs_v2, |
| .bank_max = ARRAY_SIZE(svs_mt8192_banks), |
| }; |
| |
| static const struct svs_platform_data svs_mt8183_platform_data = { |
| .name = "mt8183-svs", |
| .banks = svs_mt8183_banks, |
| .efuse_parsing = svs_mt8183_efuse_parsing, |
| .probe = svs_mt8183_platform_probe, |
| .regs = svs_regs_v2, |
| .bank_max = ARRAY_SIZE(svs_mt8183_banks), |
| }; |
| |
| static const struct of_device_id svs_of_match[] = { |
| { |
| .compatible = "mediatek,mt8192-svs", |
| .data = &svs_mt8192_platform_data, |
| }, { |
| .compatible = "mediatek,mt8183-svs", |
| .data = &svs_mt8183_platform_data, |
| }, { |
| /* Sentinel */ |
| }, |
| }; |
| |
| static struct svs_platform *svs_platform_probe(struct platform_device *pdev) |
| { |
| struct svs_platform *svsp; |
| const struct svs_platform_data *svsp_data; |
| int ret; |
| |
| svsp_data = of_device_get_match_data(&pdev->dev); |
| if (!svsp_data) { |
| dev_err(&pdev->dev, "no svs platform data?\n"); |
| return ERR_PTR(-EPERM); |
| } |
| |
| svsp = devm_kzalloc(&pdev->dev, sizeof(*svsp), GFP_KERNEL); |
| if (!svsp) |
| return ERR_PTR(-ENOMEM); |
| |
| svsp->dev = &pdev->dev; |
| svsp->name = svsp_data->name; |
| svsp->banks = svsp_data->banks; |
| svsp->efuse_parsing = svsp_data->efuse_parsing; |
| svsp->probe = svsp_data->probe; |
| svsp->regs = svsp_data->regs; |
| svsp->bank_max = svsp_data->bank_max; |
| |
| ret = svsp->probe(svsp); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return svsp; |
| } |
| |
| static int svs_probe(struct platform_device *pdev) |
| { |
| struct svs_platform *svsp; |
| int svsp_irq, ret; |
| |
| svsp = svs_platform_probe(pdev); |
| if (IS_ERR(svsp)) |
| return PTR_ERR(svsp); |
| |
| if (!svs_is_efuse_data_correct(svsp)) { |
| dev_notice(svsp->dev, "efuse data isn't correct\n"); |
| ret = -EPERM; |
| goto svs_probe_free_resource; |
| } |
| |
| ret = svs_bank_resource_setup(svsp); |
| if (ret) { |
| dev_err(svsp->dev, "svs bank resource setup fail: %d\n", ret); |
| goto svs_probe_free_resource; |
| } |
| |
| svsp_irq = platform_get_irq(pdev, 0); |
| if (svsp_irq < 0) { |
| ret = svsp_irq; |
| goto svs_probe_free_resource; |
| } |
| |
| ret = devm_request_threaded_irq(svsp->dev, svsp_irq, NULL, svs_isr, |
| IRQF_ONESHOT, svsp->name, svsp); |
| if (ret) { |
| dev_err(svsp->dev, "register irq(%d) failed: %d\n", |
| svsp_irq, ret); |
| goto svs_probe_free_resource; |
| } |
| |
| svsp->main_clk = devm_clk_get(svsp->dev, "main"); |
| if (IS_ERR(svsp->main_clk)) { |
| dev_err(svsp->dev, "failed to get clock: %ld\n", |
| PTR_ERR(svsp->main_clk)); |
| ret = PTR_ERR(svsp->main_clk); |
| goto svs_probe_free_resource; |
| } |
| |
| ret = clk_prepare_enable(svsp->main_clk); |
| if (ret) { |
| dev_err(svsp->dev, "cannot enable main clk: %d\n", ret); |
| goto svs_probe_free_resource; |
| } |
| |
| svsp->base = of_iomap(svsp->dev->of_node, 0); |
| if (IS_ERR_OR_NULL(svsp->base)) { |
| dev_err(svsp->dev, "cannot find svs register base\n"); |
| ret = -EINVAL; |
| goto svs_probe_clk_disable; |
| } |
| |
| ret = svs_start(svsp); |
| if (ret) { |
| dev_err(svsp->dev, "svs start fail: %d\n", ret); |
| goto svs_probe_iounmap; |
| } |
| |
| ret = svs_create_debug_cmds(svsp); |
| if (ret) { |
| dev_err(svsp->dev, "svs create debug cmds fail: %d\n", ret); |
| goto svs_probe_iounmap; |
| } |
| |
| return 0; |
| |
| svs_probe_iounmap: |
| iounmap(svsp->base); |
| |
| svs_probe_clk_disable: |
| clk_disable_unprepare(svsp->main_clk); |
| |
| svs_probe_free_resource: |
| if (!IS_ERR_OR_NULL(svsp->efuse)) |
| kfree(svsp->efuse); |
| if (!IS_ERR_OR_NULL(svsp->tefuse)) |
| kfree(svsp->tefuse); |
| |
| return ret; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(svs_pm_ops, svs_suspend, svs_resume); |
| |
| static struct platform_driver svs_driver = { |
| .probe = svs_probe, |
| .driver = { |
| .name = "mtk-svs", |
| .pm = &svs_pm_ops, |
| .of_match_table = svs_of_match, |
| }, |
| }; |
| |
| module_platform_driver(svs_driver); |
| |
| MODULE_AUTHOR("Roger Lu <roger.lu@mediatek.com>"); |
| MODULE_DESCRIPTION("MediaTek SVS driver"); |
| MODULE_LICENSE("GPL"); |