| /* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */ |
| /* Copyright(c) 2015-17 Intel Corporation. */ |
| |
| #ifndef __SDW_BUS_H |
| #define __SDW_BUS_H |
| |
| #define DEFAULT_BANK_SWITCH_TIMEOUT 3000 |
| #define DEFAULT_PROBE_TIMEOUT 2000 |
| |
| #if IS_ENABLED(CONFIG_ACPI) |
| int sdw_acpi_find_slaves(struct sdw_bus *bus); |
| #else |
| static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) |
| { |
| return -ENOTSUPP; |
| } |
| #endif |
| |
| int sdw_of_find_slaves(struct sdw_bus *bus); |
| void sdw_extract_slave_id(struct sdw_bus *bus, |
| u64 addr, struct sdw_slave_id *id); |
| int sdw_master_device_add(struct sdw_bus *bus, struct device *parent, |
| struct fwnode_handle *fwnode); |
| int sdw_master_device_del(struct sdw_bus *bus); |
| |
| #ifdef CONFIG_DEBUG_FS |
| void sdw_bus_debugfs_init(struct sdw_bus *bus); |
| void sdw_bus_debugfs_exit(struct sdw_bus *bus); |
| void sdw_slave_debugfs_init(struct sdw_slave *slave); |
| void sdw_slave_debugfs_exit(struct sdw_slave *slave); |
| void sdw_debugfs_init(void); |
| void sdw_debugfs_exit(void); |
| #else |
| static inline void sdw_bus_debugfs_init(struct sdw_bus *bus) {} |
| static inline void sdw_bus_debugfs_exit(struct sdw_bus *bus) {} |
| static inline void sdw_slave_debugfs_init(struct sdw_slave *slave) {} |
| static inline void sdw_slave_debugfs_exit(struct sdw_slave *slave) {} |
| static inline void sdw_debugfs_init(void) {} |
| static inline void sdw_debugfs_exit(void) {} |
| #endif |
| |
| enum { |
| SDW_MSG_FLAG_READ = 0, |
| SDW_MSG_FLAG_WRITE, |
| }; |
| |
| /** |
| * struct sdw_msg - Message structure |
| * @addr: Register address accessed in the Slave |
| * @len: number of messages |
| * @dev_num: Slave device number |
| * @addr_page1: SCP address page 1 Slave register |
| * @addr_page2: SCP address page 2 Slave register |
| * @flags: transfer flags, indicate if xfer is read or write |
| * @buf: message data buffer |
| * @ssp_sync: Send message at SSP (Stream Synchronization Point) |
| * @page: address requires paging |
| */ |
| struct sdw_msg { |
| u16 addr; |
| u16 len; |
| u8 dev_num; |
| u8 addr_page1; |
| u8 addr_page2; |
| u8 flags; |
| u8 *buf; |
| bool ssp_sync; |
| bool page; |
| }; |
| |
| #define SDW_DOUBLE_RATE_FACTOR 2 |
| |
| extern int sdw_rows[SDW_FRAME_ROWS]; |
| extern int sdw_cols[SDW_FRAME_COLS]; |
| |
| int sdw_find_row_index(int row); |
| int sdw_find_col_index(int col); |
| |
| /** |
| * sdw_port_runtime: Runtime port parameters for Master or Slave |
| * |
| * @num: Port number. For audio streams, valid port number ranges from |
| * [1,14] |
| * @ch_mask: Channel mask |
| * @transport_params: Transport parameters |
| * @port_params: Port parameters |
| * @port_node: List node for Master or Slave port_list |
| * |
| * SoundWire spec has no mention of ports for Master interface but the |
| * concept is logically extended. |
| */ |
| struct sdw_port_runtime { |
| int num; |
| int ch_mask; |
| struct sdw_transport_params transport_params; |
| struct sdw_port_params port_params; |
| struct list_head port_node; |
| }; |
| |
| /** |
| * sdw_slave_runtime: Runtime Stream parameters for Slave |
| * |
| * @slave: Slave handle |
| * @direction: Data direction for Slave |
| * @ch_count: Number of channels handled by the Slave for |
| * this stream |
| * @m_rt_node: sdw_master_runtime list node |
| * @port_list: List of Slave Ports configured for this stream |
| */ |
| struct sdw_slave_runtime { |
| struct sdw_slave *slave; |
| enum sdw_data_direction direction; |
| unsigned int ch_count; |
| struct list_head m_rt_node; |
| struct list_head port_list; |
| }; |
| |
| /** |
| * sdw_master_runtime: Runtime stream parameters for Master |
| * |
| * @bus: Bus handle |
| * @stream: Stream runtime handle |
| * @direction: Data direction for Master |
| * @ch_count: Number of channels handled by the Master for |
| * this stream, can be zero. |
| * @slave_rt_list: Slave runtime list |
| * @port_list: List of Master Ports configured for this stream, can be zero. |
| * @stream_node: sdw_stream_runtime master_list node |
| * @bus_node: sdw_bus m_rt_list node |
| */ |
| struct sdw_master_runtime { |
| struct sdw_bus *bus; |
| struct sdw_stream_runtime *stream; |
| enum sdw_data_direction direction; |
| unsigned int ch_count; |
| struct list_head slave_rt_list; |
| struct list_head port_list; |
| struct list_head stream_node; |
| struct list_head bus_node; |
| }; |
| |
| struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave, |
| enum sdw_data_direction direction, |
| unsigned int port_num); |
| int sdw_configure_dpn_intr(struct sdw_slave *slave, int port, |
| bool enable, int mask); |
| |
| int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg); |
| int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, |
| struct sdw_defer *defer); |
| |
| #define SDW_READ_INTR_CLEAR_RETRY 10 |
| |
| int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, |
| u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf); |
| |
| /* Read-Modify-Write Slave register */ |
| static inline int |
| sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) |
| { |
| int tmp; |
| |
| tmp = sdw_read(slave, addr); |
| if (tmp < 0) |
| return tmp; |
| |
| tmp = (tmp & ~mask) | val; |
| return sdw_write(slave, addr, tmp); |
| } |
| |
| /* |
| * At the moment we only track Master-initiated hw_reset. |
| * Additional fields can be added as needed |
| */ |
| #define SDW_UNATTACH_REQUEST_MASTER_RESET BIT(0) |
| |
| void sdw_clear_slave_status(struct sdw_bus *bus, u32 request); |
| int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size); |
| |
| #endif /* __SDW_BUS_H */ |