| /* |
| * arch/arm/mach-pxa/time.c |
| * |
| * PXA clocksource, clockevents, and OST interrupt handlers. |
| * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>. |
| * |
| * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001 |
| * by MontaVista Software, Inc. (Nico, your code rocks!) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/clockchips.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/sched_clock.h> |
| |
| #include <asm/div64.h> |
| |
| #define OSMR0 0x00 /* OS Timer 0 Match Register */ |
| #define OSMR1 0x04 /* OS Timer 1 Match Register */ |
| #define OSMR2 0x08 /* OS Timer 2 Match Register */ |
| #define OSMR3 0x0C /* OS Timer 3 Match Register */ |
| |
| #define OSCR 0x10 /* OS Timer Counter Register */ |
| #define OSSR 0x14 /* OS Timer Status Register */ |
| #define OWER 0x18 /* OS Timer Watchdog Enable Register */ |
| #define OIER 0x1C /* OS Timer Interrupt Enable Register */ |
| |
| #define OSSR_M3 (1 << 3) /* Match status channel 3 */ |
| #define OSSR_M2 (1 << 2) /* Match status channel 2 */ |
| #define OSSR_M1 (1 << 1) /* Match status channel 1 */ |
| #define OSSR_M0 (1 << 0) /* Match status channel 0 */ |
| |
| #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ |
| |
| /* |
| * This is PXA's sched_clock implementation. This has a resolution |
| * of at least 308 ns and a maximum value of 208 days. |
| * |
| * The return value is guaranteed to be monotonic in that range as |
| * long as there is always less than 582 seconds between successive |
| * calls to sched_clock() which should always be the case in practice. |
| */ |
| |
| #define timer_readl(reg) readl_relaxed(timer_base + (reg)) |
| #define timer_writel(val, reg) writel_relaxed((val), timer_base + (reg)) |
| |
| static void __iomem *timer_base; |
| |
| static u64 notrace pxa_read_sched_clock(void) |
| { |
| return timer_readl(OSCR); |
| } |
| |
| |
| #define MIN_OSCR_DELTA 16 |
| |
| static irqreturn_t |
| pxa_ost0_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *c = dev_id; |
| |
| /* Disarm the compare/match, signal the event. */ |
| timer_writel(timer_readl(OIER) & ~OIER_E0, OIER); |
| timer_writel(OSSR_M0, OSSR); |
| c->event_handler(c); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int |
| pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) |
| { |
| unsigned long next, oscr; |
| |
| timer_writel(timer_readl(OIER) | OIER_E0, OIER); |
| next = timer_readl(OSCR) + delta; |
| timer_writel(next, OSMR0); |
| oscr = timer_readl(OSCR); |
| |
| return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; |
| } |
| |
| static int pxa_osmr0_shutdown(struct clock_event_device *evt) |
| { |
| /* initializing, released, or preparing for suspend */ |
| timer_writel(timer_readl(OIER) & ~OIER_E0, OIER); |
| timer_writel(OSSR_M0, OSSR); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static unsigned long osmr[4], oier, oscr; |
| |
| static void pxa_timer_suspend(struct clock_event_device *cedev) |
| { |
| osmr[0] = timer_readl(OSMR0); |
| osmr[1] = timer_readl(OSMR1); |
| osmr[2] = timer_readl(OSMR2); |
| osmr[3] = timer_readl(OSMR3); |
| oier = timer_readl(OIER); |
| oscr = timer_readl(OSCR); |
| } |
| |
| static void pxa_timer_resume(struct clock_event_device *cedev) |
| { |
| /* |
| * Ensure that we have at least MIN_OSCR_DELTA between match |
| * register 0 and the OSCR, to guarantee that we will receive |
| * the one-shot timer interrupt. We adjust OSMR0 in preference |
| * to OSCR to guarantee that OSCR is monotonically incrementing. |
| */ |
| if (osmr[0] - oscr < MIN_OSCR_DELTA) |
| osmr[0] += MIN_OSCR_DELTA; |
| |
| timer_writel(osmr[0], OSMR0); |
| timer_writel(osmr[1], OSMR1); |
| timer_writel(osmr[2], OSMR2); |
| timer_writel(osmr[3], OSMR3); |
| timer_writel(oier, OIER); |
| timer_writel(oscr, OSCR); |
| } |
| #else |
| #define pxa_timer_suspend NULL |
| #define pxa_timer_resume NULL |
| #endif |
| |
| static struct clock_event_device ckevt_pxa_osmr0 = { |
| .name = "osmr0", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| .rating = 200, |
| .set_next_event = pxa_osmr0_set_next_event, |
| .set_state_shutdown = pxa_osmr0_shutdown, |
| .set_state_oneshot = pxa_osmr0_shutdown, |
| .suspend = pxa_timer_suspend, |
| .resume = pxa_timer_resume, |
| }; |
| |
| static struct irqaction pxa_ost0_irq = { |
| .name = "ost0", |
| .flags = IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = pxa_ost0_interrupt, |
| .dev_id = &ckevt_pxa_osmr0, |
| }; |
| |
| static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate) |
| { |
| int ret; |
| |
| timer_writel(0, OIER); |
| timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); |
| |
| sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate); |
| |
| ckevt_pxa_osmr0.cpumask = cpumask_of(0); |
| |
| ret = setup_irq(irq, &pxa_ost0_irq); |
| if (ret) { |
| pr_err("Failed to setup irq"); |
| return ret; |
| } |
| |
| ret = clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200, |
| 32, clocksource_mmio_readl_up); |
| if (ret) { |
| pr_err("Failed to init clocksource"); |
| return ret; |
| } |
| |
| clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate, |
| MIN_OSCR_DELTA * 2, 0x7fffffff); |
| |
| return 0; |
| } |
| |
| static int __init pxa_timer_dt_init(struct device_node *np) |
| { |
| struct clk *clk; |
| int irq, ret; |
| |
| /* timer registers are shared with watchdog timer */ |
| timer_base = of_iomap(np, 0); |
| if (!timer_base) { |
| pr_err("%s: unable to map resource\n", np->name); |
| return -ENXIO; |
| } |
| |
| clk = of_clk_get(np, 0); |
| if (IS_ERR(clk)) { |
| pr_crit("%s: unable to get clk\n", np->name); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| pr_crit("Failed to prepare clock"); |
| return ret; |
| } |
| |
| /* we are only interested in OS-timer0 irq */ |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq <= 0) { |
| pr_crit("%s: unable to parse OS-timer0 irq\n", np->name); |
| return -EINVAL; |
| } |
| |
| return pxa_timer_common_init(irq, clk_get_rate(clk)); |
| } |
| CLOCKSOURCE_OF_DECLARE_RET(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init); |
| |
| /* |
| * Legacy timer init for non device-tree boards. |
| */ |
| void __init pxa_timer_nodt_init(int irq, void __iomem *base, |
| unsigned long clock_tick_rate) |
| { |
| struct clk *clk; |
| |
| timer_base = base; |
| clk = clk_get(NULL, "OSTIMER0"); |
| if (clk && !IS_ERR(clk)) |
| clk_prepare_enable(clk); |
| else |
| pr_crit("%s: unable to get clk\n", __func__); |
| |
| pxa_timer_common_init(irq, clock_tick_rate); |
| } |