| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/sched/types.h> |
| |
| #include <media/cec-pin.h> |
| #include "cec-pin-priv.h" |
| |
| struct cec_error_inj_cmd { |
| unsigned int mode_offset; |
| int arg_idx; |
| const char *cmd; |
| }; |
| |
| static const struct cec_error_inj_cmd cec_error_inj_cmds[] = { |
| { CEC_ERROR_INJ_RX_NACK_OFFSET, -1, "rx-nack" }, |
| { CEC_ERROR_INJ_RX_LOW_DRIVE_OFFSET, |
| CEC_ERROR_INJ_RX_LOW_DRIVE_ARG_IDX, "rx-low-drive" }, |
| { CEC_ERROR_INJ_RX_ADD_BYTE_OFFSET, -1, "rx-add-byte" }, |
| { CEC_ERROR_INJ_RX_REMOVE_BYTE_OFFSET, -1, "rx-remove-byte" }, |
| { CEC_ERROR_INJ_RX_ARB_LOST_OFFSET, |
| CEC_ERROR_INJ_RX_ARB_LOST_ARG_IDX, "rx-arb-lost" }, |
| |
| { CEC_ERROR_INJ_TX_NO_EOM_OFFSET, -1, "tx-no-eom" }, |
| { CEC_ERROR_INJ_TX_EARLY_EOM_OFFSET, -1, "tx-early-eom" }, |
| { CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET, |
| CEC_ERROR_INJ_TX_ADD_BYTES_ARG_IDX, "tx-add-bytes" }, |
| { CEC_ERROR_INJ_TX_REMOVE_BYTE_OFFSET, -1, "tx-remove-byte" }, |
| { CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET, |
| CEC_ERROR_INJ_TX_SHORT_BIT_ARG_IDX, "tx-short-bit" }, |
| { CEC_ERROR_INJ_TX_LONG_BIT_OFFSET, |
| CEC_ERROR_INJ_TX_LONG_BIT_ARG_IDX, "tx-long-bit" }, |
| { CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET, |
| CEC_ERROR_INJ_TX_CUSTOM_BIT_ARG_IDX, "tx-custom-bit" }, |
| { CEC_ERROR_INJ_TX_SHORT_START_OFFSET, -1, "tx-short-start" }, |
| { CEC_ERROR_INJ_TX_LONG_START_OFFSET, -1, "tx-long-start" }, |
| { CEC_ERROR_INJ_TX_CUSTOM_START_OFFSET, -1, "tx-custom-start" }, |
| { CEC_ERROR_INJ_TX_LAST_BIT_OFFSET, |
| CEC_ERROR_INJ_TX_LAST_BIT_ARG_IDX, "tx-last-bit" }, |
| { CEC_ERROR_INJ_TX_LOW_DRIVE_OFFSET, |
| CEC_ERROR_INJ_TX_LOW_DRIVE_ARG_IDX, "tx-low-drive" }, |
| { 0, -1, NULL } |
| }; |
| |
| u16 cec_pin_rx_error_inj(struct cec_pin *pin) |
| { |
| u16 cmd = CEC_ERROR_INJ_OP_ANY; |
| |
| /* Only when 18 bits have been received do we have a valid cmd */ |
| if (!(pin->error_inj[cmd] & CEC_ERROR_INJ_RX_MASK) && |
| pin->rx_bit >= 18) |
| cmd = pin->rx_msg.msg[1]; |
| return (pin->error_inj[cmd] & CEC_ERROR_INJ_RX_MASK) ? cmd : |
| CEC_ERROR_INJ_OP_ANY; |
| } |
| |
| u16 cec_pin_tx_error_inj(struct cec_pin *pin) |
| { |
| u16 cmd = CEC_ERROR_INJ_OP_ANY; |
| |
| if (!(pin->error_inj[cmd] & CEC_ERROR_INJ_TX_MASK) && |
| pin->tx_msg.len > 1) |
| cmd = pin->tx_msg.msg[1]; |
| return (pin->error_inj[cmd] & CEC_ERROR_INJ_TX_MASK) ? cmd : |
| CEC_ERROR_INJ_OP_ANY; |
| } |
| |
| bool cec_pin_error_inj_parse_line(struct cec_adapter *adap, char *line) |
| { |
| static const char *delims = " \t\r"; |
| struct cec_pin *pin = adap->pin; |
| unsigned int i; |
| bool has_pos = false; |
| char *p = line; |
| char *token; |
| char *comma; |
| u64 *error; |
| u8 *args; |
| bool has_op; |
| u32 op; |
| u8 mode; |
| u8 pos; |
| u8 v; |
| |
| p = skip_spaces(p); |
| token = strsep(&p, delims); |
| if (!strcmp(token, "clear")) { |
| memset(pin->error_inj, 0, sizeof(pin->error_inj)); |
| pin->rx_toggle = pin->tx_toggle = false; |
| pin->tx_ignore_nack_until_eom = false; |
| pin->tx_custom_pulse = false; |
| pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT; |
| pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT; |
| return true; |
| } |
| if (!strcmp(token, "rx-clear")) { |
| for (i = 0; i <= CEC_ERROR_INJ_OP_ANY; i++) |
| pin->error_inj[i] &= ~CEC_ERROR_INJ_RX_MASK; |
| pin->rx_toggle = false; |
| return true; |
| } |
| if (!strcmp(token, "tx-clear")) { |
| for (i = 0; i <= CEC_ERROR_INJ_OP_ANY; i++) |
| pin->error_inj[i] &= ~CEC_ERROR_INJ_TX_MASK; |
| pin->tx_toggle = false; |
| pin->tx_ignore_nack_until_eom = false; |
| pin->tx_custom_pulse = false; |
| pin->tx_custom_low_usecs = CEC_TIM_CUSTOM_DEFAULT; |
| pin->tx_custom_high_usecs = CEC_TIM_CUSTOM_DEFAULT; |
| return true; |
| } |
| if (!strcmp(token, "tx-ignore-nack-until-eom")) { |
| pin->tx_ignore_nack_until_eom = true; |
| return true; |
| } |
| if (!strcmp(token, "tx-custom-pulse")) { |
| pin->tx_custom_pulse = true; |
| cec_pin_start_timer(pin); |
| return true; |
| } |
| if (!p) |
| return false; |
| |
| p = skip_spaces(p); |
| if (!strcmp(token, "tx-custom-low-usecs")) { |
| u32 usecs; |
| |
| if (kstrtou32(p, 0, &usecs) || usecs > 10000000) |
| return false; |
| pin->tx_custom_low_usecs = usecs; |
| return true; |
| } |
| if (!strcmp(token, "tx-custom-high-usecs")) { |
| u32 usecs; |
| |
| if (kstrtou32(p, 0, &usecs) || usecs > 10000000) |
| return false; |
| pin->tx_custom_high_usecs = usecs; |
| return true; |
| } |
| |
| comma = strchr(token, ','); |
| if (comma) |
| *comma++ = '\0'; |
| if (!strcmp(token, "any")) |
| op = CEC_ERROR_INJ_OP_ANY; |
| else if (!kstrtou8(token, 0, &v)) |
| op = v; |
| else |
| return false; |
| mode = CEC_ERROR_INJ_MODE_ONCE; |
| if (comma) { |
| if (!strcmp(comma, "off")) |
| mode = CEC_ERROR_INJ_MODE_OFF; |
| else if (!strcmp(comma, "once")) |
| mode = CEC_ERROR_INJ_MODE_ONCE; |
| else if (!strcmp(comma, "always")) |
| mode = CEC_ERROR_INJ_MODE_ALWAYS; |
| else if (!strcmp(comma, "toggle")) |
| mode = CEC_ERROR_INJ_MODE_TOGGLE; |
| else |
| return false; |
| } |
| |
| error = pin->error_inj + op; |
| args = pin->error_inj_args[op]; |
| has_op = op <= 0xff; |
| |
| token = strsep(&p, delims); |
| if (p) { |
| p = skip_spaces(p); |
| has_pos = !kstrtou8(p, 0, &pos); |
| } |
| |
| if (!strcmp(token, "clear")) { |
| *error = 0; |
| return true; |
| } |
| if (!strcmp(token, "rx-clear")) { |
| *error &= ~CEC_ERROR_INJ_RX_MASK; |
| return true; |
| } |
| if (!strcmp(token, "tx-clear")) { |
| *error &= ~CEC_ERROR_INJ_TX_MASK; |
| return true; |
| } |
| |
| for (i = 0; cec_error_inj_cmds[i].cmd; i++) { |
| const char *cmd = cec_error_inj_cmds[i].cmd; |
| unsigned int mode_offset; |
| u64 mode_mask; |
| int arg_idx; |
| bool is_bit_pos = true; |
| |
| if (strcmp(token, cmd)) |
| continue; |
| |
| mode_offset = cec_error_inj_cmds[i].mode_offset; |
| mode_mask = CEC_ERROR_INJ_MODE_MASK << mode_offset; |
| arg_idx = cec_error_inj_cmds[i].arg_idx; |
| |
| if (mode_offset == CEC_ERROR_INJ_RX_ARB_LOST_OFFSET || |
| mode_offset == CEC_ERROR_INJ_TX_ADD_BYTES_OFFSET) |
| is_bit_pos = false; |
| |
| if (mode_offset == CEC_ERROR_INJ_RX_ARB_LOST_OFFSET) { |
| if (has_op) |
| return false; |
| if (!has_pos) |
| pos = 0x0f; |
| } |
| if (arg_idx >= 0 && is_bit_pos) { |
| if (!has_pos || pos >= 160) |
| return false; |
| if (has_op && pos < 10 + 8) |
| return false; |
| /* Invalid bit position may not be the Ack bit */ |
| if ((mode_offset == CEC_ERROR_INJ_TX_SHORT_BIT_OFFSET || |
| mode_offset == CEC_ERROR_INJ_TX_LONG_BIT_OFFSET || |
| mode_offset == CEC_ERROR_INJ_TX_CUSTOM_BIT_OFFSET) && |
| (pos % 10) == 9) |
| return false; |
| } |
| *error &= ~mode_mask; |
| *error |= (u64)mode << mode_offset; |
| if (arg_idx >= 0) |
| args[arg_idx] = pos; |
| return true; |
| } |
| return false; |
| } |
| |
| static void cec_pin_show_cmd(struct seq_file *sf, u32 cmd, u8 mode) |
| { |
| if (cmd == CEC_ERROR_INJ_OP_ANY) |
| seq_puts(sf, "any,"); |
| else |
| seq_printf(sf, "0x%02x,", cmd); |
| switch (mode) { |
| case CEC_ERROR_INJ_MODE_ONCE: |
| seq_puts(sf, "once "); |
| break; |
| case CEC_ERROR_INJ_MODE_ALWAYS: |
| seq_puts(sf, "always "); |
| break; |
| case CEC_ERROR_INJ_MODE_TOGGLE: |
| seq_puts(sf, "toggle "); |
| break; |
| default: |
| seq_puts(sf, "off "); |
| break; |
| } |
| } |
| |
| int cec_pin_error_inj_show(struct cec_adapter *adap, struct seq_file *sf) |
| { |
| struct cec_pin *pin = adap->pin; |
| unsigned int i, j; |
| |
| seq_puts(sf, "# Clear error injections:\n"); |
| seq_puts(sf, "# clear clear all rx and tx error injections\n"); |
| seq_puts(sf, "# rx-clear clear all rx error injections\n"); |
| seq_puts(sf, "# tx-clear clear all tx error injections\n"); |
| seq_puts(sf, "# <op> clear clear all rx and tx error injections for <op>\n"); |
| seq_puts(sf, "# <op> rx-clear clear all rx error injections for <op>\n"); |
| seq_puts(sf, "# <op> tx-clear clear all tx error injections for <op>\n"); |
| seq_puts(sf, "#\n"); |
| seq_puts(sf, "# RX error injection:\n"); |
| seq_puts(sf, "# <op>[,<mode>] rx-nack NACK the message instead of sending an ACK\n"); |
| seq_puts(sf, "# <op>[,<mode>] rx-low-drive <bit> force a low-drive condition at this bit position\n"); |
| seq_puts(sf, "# <op>[,<mode>] rx-add-byte add a spurious byte to the received CEC message\n"); |
| seq_puts(sf, "# <op>[,<mode>] rx-remove-byte remove the last byte from the received CEC message\n"); |
| seq_puts(sf, "# <op>[,<mode>] rx-arb-lost <poll> generate a POLL message to trigger an arbitration lost\n"); |
| seq_puts(sf, "#\n"); |
| seq_puts(sf, "# TX error injection settings:\n"); |
| seq_puts(sf, "# tx-ignore-nack-until-eom ignore early NACKs until EOM\n"); |
| seq_puts(sf, "# tx-custom-low-usecs <usecs> define the 'low' time for the custom pulse\n"); |
| seq_puts(sf, "# tx-custom-high-usecs <usecs> define the 'high' time for the custom pulse\n"); |
| seq_puts(sf, "# tx-custom-pulse transmit the custom pulse once the bus is idle\n"); |
| seq_puts(sf, "#\n"); |
| seq_puts(sf, "# TX error injection:\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-no-eom don't set the EOM bit\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-early-eom set the EOM bit one byte too soon\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-add-bytes <num> append <num> (1-255) spurious bytes to the message\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-remove-byte drop the last byte from the message\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-short-bit <bit> make this bit shorter than allowed\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-long-bit <bit> make this bit longer than allowed\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-custom-bit <bit> send the custom pulse instead of this bit\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-short-start send a start pulse that's too short\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-long-start send a start pulse that's too long\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-custom-start send the custom pulse instead of the start pulse\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-last-bit <bit> stop sending after this bit\n"); |
| seq_puts(sf, "# <op>[,<mode>] tx-low-drive <bit> force a low-drive condition at this bit position\n"); |
| seq_puts(sf, "#\n"); |
| seq_puts(sf, "# <op> CEC message opcode (0-255) or 'any'\n"); |
| seq_puts(sf, "# <mode> 'once' (default), 'always', 'toggle' or 'off'\n"); |
| seq_puts(sf, "# <bit> CEC message bit (0-159)\n"); |
| seq_puts(sf, "# 10 bits per 'byte': bits 0-7: data, bit 8: EOM, bit 9: ACK\n"); |
| seq_puts(sf, "# <poll> CEC poll message used to test arbitration lost (0x00-0xff, default 0x0f)\n"); |
| seq_puts(sf, "# <usecs> microseconds (0-10000000, default 1000)\n"); |
| |
| seq_puts(sf, "\nclear\n"); |
| |
| for (i = 0; i < ARRAY_SIZE(pin->error_inj); i++) { |
| u64 e = pin->error_inj[i]; |
| |
| for (j = 0; cec_error_inj_cmds[j].cmd; j++) { |
| const char *cmd = cec_error_inj_cmds[j].cmd; |
| unsigned int mode; |
| unsigned int mode_offset; |
| int arg_idx; |
| |
| mode_offset = cec_error_inj_cmds[j].mode_offset; |
| arg_idx = cec_error_inj_cmds[j].arg_idx; |
| mode = (e >> mode_offset) & CEC_ERROR_INJ_MODE_MASK; |
| if (!mode) |
| continue; |
| cec_pin_show_cmd(sf, i, mode); |
| seq_puts(sf, cmd); |
| if (arg_idx >= 0) |
| seq_printf(sf, " %u", |
| pin->error_inj_args[i][arg_idx]); |
| seq_puts(sf, "\n"); |
| } |
| } |
| |
| if (pin->tx_ignore_nack_until_eom) |
| seq_puts(sf, "tx-ignore-nack-until-eom\n"); |
| if (pin->tx_custom_pulse) |
| seq_puts(sf, "tx-custom-pulse\n"); |
| if (pin->tx_custom_low_usecs != CEC_TIM_CUSTOM_DEFAULT) |
| seq_printf(sf, "tx-custom-low-usecs %u\n", |
| pin->tx_custom_low_usecs); |
| if (pin->tx_custom_high_usecs != CEC_TIM_CUSTOM_DEFAULT) |
| seq_printf(sf, "tx-custom-high-usecs %u\n", |
| pin->tx_custom_high_usecs); |
| return 0; |
| } |