| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2021 Amlogic, Inc. All rights reserved. |
| */ |
| |
| /dts-v1/; |
| |
| #include "meson-s4.dtsi" |
| |
| / { |
| model = "Amlogic Meson S4 AQ222 Development Board"; |
| compatible = "amlogic,aq222", "amlogic,s4"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &uart_b; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x40000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* 52 MiB reserved for ARM Trusted Firmware */ |
| secmon_reserved: secmon@5000000 { |
| reg = <0x0 0x05000000 0x0 0x3400000>; |
| no-map; |
| }; |
| }; |
| |
| sdio_32k: sdio-32k { |
| compatible = "pwm-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ |
| }; |
| |
| sdio_pwrseq: sdio-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; |
| clocks = <&sdio_32k>; |
| clock-names = "ext_clock"; |
| }; |
| |
| main_12v: regulator-main-12v { |
| compatible = "regulator-fixed"; |
| regulator-name = "12V"; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| regulator-always-on; |
| }; |
| |
| vddao_3v3: regulator-vddao-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDAO_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&main_12v>; |
| regulator-always-on; |
| }; |
| |
| vddio_ao1v8: regulator-vddio-ao1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDIO_AO1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vddao_3v3>; |
| regulator-always-on; |
| }; |
| |
| /* SY8120B1ABC DC/DC Regulator. */ |
| vddcpu: regulator-vddcpu { |
| compatible = "pwm-regulator"; |
| |
| regulator-name = "VDDCPU"; |
| regulator-min-microvolt = <689000>; |
| regulator-max-microvolt = <1049000>; |
| |
| vin-supply = <&main_12v>; |
| |
| pwms = <&pwm_ij 1 1500 0>; |
| pwm-dutycycle-range = <100 0>; |
| |
| regulator-boot-on; |
| regulator-always-on; |
| /* Voltage Duty-Cycle */ |
| voltage-table = <1049000 0>, |
| <1039000 3>, |
| <1029000 6>, |
| <1019000 9>, |
| <1009000 12>, |
| <999000 14>, |
| <989000 17>, |
| <979000 20>, |
| <969000 23>, |
| <959000 26>, |
| <949000 29>, |
| <939000 31>, |
| <929000 34>, |
| <919000 37>, |
| <909000 40>, |
| <899000 43>, |
| <889000 45>, |
| <879000 48>, |
| <869000 51>, |
| <859000 54>, |
| <849000 56>, |
| <839000 59>, |
| <829000 62>, |
| <819000 65>, |
| <809000 68>, |
| <799000 70>, |
| <789000 73>, |
| <779000 76>, |
| <769000 79>, |
| <759000 81>, |
| <749000 84>, |
| <739000 87>, |
| <729000 89>, |
| <719000 92>, |
| <709000 95>, |
| <699000 98>, |
| <689000 100>; |
| }; |
| }; |
| |
| &pwm_ef { |
| status = "okay"; |
| pinctrl-0 = <&pwm_e_pins1>; |
| pinctrl-names = "default"; |
| }; |
| |
| &pwm_ij { |
| status = "okay"; |
| }; |
| |
| &uart_b { |
| status = "okay"; |
| }; |
| |
| &ir { |
| status = "okay"; |
| pinctrl-0 = <&remote_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &sdio { |
| pinctrl-0 = <&sdio_pins>; |
| pinctrl-1 = <&sdio_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| max-frequency = <200000000>; |
| non-removable; |
| disable-wp; |
| no-sd; |
| no-mmc; |
| vmmc-supply = <&vddao_3v3>; |
| vqmmc-supply = <&vddio_ao1v8>; |
| }; |
| |
| &sd { |
| status = "okay"; |
| pinctrl-0 = <&sdcard_pins>; |
| pinctrl-1 = <&sdcard_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| max-frequency = <200000000>; |
| disable-wp; |
| |
| cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <&vddao_3v3>; |
| vqmmc-supply = <&vddao_3v3>; |
| }; |
| |
| &nand { |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pinctrl-0 = <&nand_pins>; |
| pinctrl-names = "default"; |
| |
| nand@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| nand-on-flash-bbt; |
| |
| partition@0 { |
| label = "boot"; |
| reg = <0x0 0x00200000>; |
| }; |
| partition@200000 { |
| label = "env"; |
| reg = <0x00200000 0x00400000>; |
| }; |
| partition@600000 { |
| label = "system"; |
| reg = <0x00600000 0x00a00000>; |
| }; |
| partition@1000000 { |
| label = "rootfs"; |
| reg = <0x01000000 0x03000000>; |
| }; |
| partition@4000000 { |
| label = "media"; |
| reg = <0x04000000 0x8000000>; |
| }; |
| }; |
| }; |
| |
| &spicc0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spicc0_pins_x>; |
| cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; |
| }; |
| |
| ðmac { |
| status = "okay"; |
| phy-handle = <&internal_ephy>; |
| phy-mode = "rmii"; |
| }; |