blob: 89a4765737b4f47291bf34cc1c708b0c0006b60a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Gregor Herburger
*/
#include "fsl-lx2160a.dtsi"
/ {
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
&emdio1 {
status = "okay";
};
&emdio2 {
status = "okay";
};
&esdhc1 {
bus-width = <8>;
no-sd;
no-sdio;
non-removable;
mmc-hs200-1_8v;
status = "okay";
};
&fspi {
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <10000000>;
spi-rx-bus-width = <1>;
spi-tx-bus-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
flash1: flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <10000000>;
spi-rx-bus-width = <1>;
spi-tx-bus-width = <1>;
};
};
&i2c0 {
scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
status = "okay";
sensor0: temperature-sensor@1f {
compatible = "nxp,se97", "jedec,jc-42.4-temp";
reg = <0x1f>;
};
eeprom1: eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
pagesize = <16>;
read-only;
vcc-supply = <&reg_vcc3v3>;
};
rtc: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
quartz-load-femtofarads = <12500>;
};
eeprom2: eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
vcc-supply = <&reg_vcc3v3>;
};
};