| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (C) 2016 Marvell Technology Group Ltd. |
| * |
| * Device Tree file for Marvell Armada CP11x. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/mvebu-icu.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| #include "armada-common.dtsi" |
| |
| #define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) |
| |
| / { |
| /* |
| * The contents of the node are defined below, in order to |
| * save one indentation level |
| */ |
| CP11X_NAME: CP11X_NAME { }; |
| |
| /* |
| * CPs only have one sensor in the thermal IC. |
| * |
| * The cooling maps are empty as there are no cooling devices. |
| */ |
| thermal-zones { |
| CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) { |
| polling-delay-passive = <0>; /* Interrupt driven */ |
| polling-delay = <0>; /* Interrupt driven */ |
| |
| thermal-sensors = <&CP11X_LABEL(thermal) 0>; |
| |
| trips { |
| CP11X_LABEL(crit): crit { |
| temperature = <100000>; /* mC degrees */ |
| hysteresis = <2000>; /* mC degrees */ |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { }; |
| }; |
| }; |
| }; |
| |
| &CP11X_NAME { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&CP11X_LABEL(icu_nsr)>; |
| ranges; |
| |
| config-space@CP11X_BASE { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; |
| |
| CP11X_LABEL(ethernet): ethernet@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "marvell,armada-7k-pp22"; |
| reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>; |
| clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, |
| <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, |
| <&CP11X_LABEL(clk) 1 18>; |
| clock-names = "pp_clk", "gop_clk", |
| "mg_clk", "mg_core_clk", "axi_clk"; |
| marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| status = "disabled"; |
| dma-coherent; |
| |
| CP11X_LABEL(eth0): ethernet-port@0 { |
| interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, |
| <43 IRQ_TYPE_LEVEL_HIGH>, |
| <47 IRQ_TYPE_LEVEL_HIGH>, |
| <51 IRQ_TYPE_LEVEL_HIGH>, |
| <55 IRQ_TYPE_LEVEL_HIGH>, |
| <59 IRQ_TYPE_LEVEL_HIGH>, |
| <63 IRQ_TYPE_LEVEL_HIGH>, |
| <67 IRQ_TYPE_LEVEL_HIGH>, |
| <71 IRQ_TYPE_LEVEL_HIGH>, |
| <129 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hif0", "hif1", "hif2", |
| "hif3", "hif4", "hif5", "hif6", "hif7", |
| "hif8", "link"; |
| reg = <0>; |
| port-id = <0>; /* For backward compatibility. */ |
| gop-port-id = <0>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(eth1): ethernet-port@1 { |
| interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, |
| <44 IRQ_TYPE_LEVEL_HIGH>, |
| <48 IRQ_TYPE_LEVEL_HIGH>, |
| <52 IRQ_TYPE_LEVEL_HIGH>, |
| <56 IRQ_TYPE_LEVEL_HIGH>, |
| <60 IRQ_TYPE_LEVEL_HIGH>, |
| <64 IRQ_TYPE_LEVEL_HIGH>, |
| <68 IRQ_TYPE_LEVEL_HIGH>, |
| <72 IRQ_TYPE_LEVEL_HIGH>, |
| <128 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hif0", "hif1", "hif2", |
| "hif3", "hif4", "hif5", "hif6", "hif7", |
| "hif8", "link"; |
| reg = <1>; |
| port-id = <1>; /* For backward compatibility. */ |
| gop-port-id = <2>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(eth2): ethernet-port@2 { |
| interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, |
| <45 IRQ_TYPE_LEVEL_HIGH>, |
| <49 IRQ_TYPE_LEVEL_HIGH>, |
| <53 IRQ_TYPE_LEVEL_HIGH>, |
| <57 IRQ_TYPE_LEVEL_HIGH>, |
| <61 IRQ_TYPE_LEVEL_HIGH>, |
| <65 IRQ_TYPE_LEVEL_HIGH>, |
| <69 IRQ_TYPE_LEVEL_HIGH>, |
| <73 IRQ_TYPE_LEVEL_HIGH>, |
| <127 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hif0", "hif1", "hif2", |
| "hif3", "hif4", "hif5", "hif6", "hif7", |
| "hif8", "link"; |
| reg = <2>; |
| port-id = <2>; /* For backward compatibility. */ |
| gop-port-id = <3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| CP11X_LABEL(comphy): phy@120000 { |
| compatible = "marvell,comphy-cp110"; |
| reg = <0x120000 0x6000>; |
| marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, |
| <&CP11X_LABEL(clk) 1 18>; |
| clock-names = "mg_clk", "mg_core_clk", "axi_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| CP11X_LABEL(comphy0): phy@0 { |
| reg = <0>; |
| #phy-cells = <1>; |
| }; |
| |
| CP11X_LABEL(comphy1): phy@1 { |
| reg = <1>; |
| #phy-cells = <1>; |
| }; |
| |
| CP11X_LABEL(comphy2): phy@2 { |
| reg = <2>; |
| #phy-cells = <1>; |
| }; |
| |
| CP11X_LABEL(comphy3): phy@3 { |
| reg = <3>; |
| #phy-cells = <1>; |
| }; |
| |
| CP11X_LABEL(comphy4): phy@4 { |
| reg = <4>; |
| #phy-cells = <1>; |
| }; |
| |
| CP11X_LABEL(comphy5): phy@5 { |
| reg = <5>; |
| #phy-cells = <1>; |
| }; |
| }; |
| |
| CP11X_LABEL(mdio): mdio@12a200 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "marvell,orion-mdio"; |
| reg = <0x12a200 0x10>; |
| clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, |
| <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(xmdio): mdio@12a600 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "marvell,xmdio"; |
| reg = <0x12a600 0x10>; |
| clocks = <&CP11X_LABEL(clk) 1 5>, |
| <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(icu): interrupt-controller@1e0000 { |
| compatible = "marvell,cp110-icu"; |
| reg = <0x1e0000 0x440>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| CP11X_LABEL(icu_nsr): interrupt-controller@10 { |
| compatible = "marvell,cp110-icu-nsr"; |
| reg = <0x10 0x20>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| msi-parent = <&gicp>; |
| }; |
| |
| CP11X_LABEL(icu_sei): interrupt-controller@50 { |
| compatible = "marvell,cp110-icu-sei"; |
| reg = <0x50 0x10>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| msi-parent = <&sei>; |
| }; |
| }; |
| |
| CP11X_LABEL(rtc): rtc@284000 { |
| compatible = "marvell,armada-8k-rtc"; |
| reg = <0x284000 0x20>, <0x284080 0x24>; |
| reg-names = "rtc", "rtc-soc"; |
| interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| CP11X_LABEL(syscon0): system-controller@440000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x440000 0x2000>; |
| |
| CP11X_LABEL(clk): clock { |
| compatible = "marvell,cp110-clock"; |
| #clock-cells = <2>; |
| }; |
| |
| CP11X_LABEL(gpio1): gpio@100 { |
| compatible = "marvell,armada-8k-gpio"; |
| offset = <0x100>; |
| ngpios = <32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; |
| marvell,pwm-offset = <0x1f0>; |
| #pwm-cells = <2>; |
| interrupt-controller; |
| interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, |
| <85 IRQ_TYPE_LEVEL_HIGH>, |
| <84 IRQ_TYPE_LEVEL_HIGH>, |
| <83 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| clock-names = "core", "axi"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(gpio2): gpio@140 { |
| compatible = "marvell,armada-8k-gpio"; |
| offset = <0x140>; |
| ngpios = <31>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; |
| marvell,pwm-offset = <0x1f0>; |
| #pwm-cells = <2>; |
| interrupt-controller; |
| interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, |
| <81 IRQ_TYPE_LEVEL_HIGH>, |
| <80 IRQ_TYPE_LEVEL_HIGH>, |
| <79 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| clock-names = "core", "axi"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| }; |
| |
| CP11X_LABEL(syscon1): system-controller@400000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x400000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| CP11X_LABEL(thermal): thermal-sensor@70 { |
| compatible = "marvell,armada-cp110-thermal"; |
| reg = <0x70 0x10>; |
| interrupts-extended = |
| <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| CP11X_LABEL(utmi): utmi@580000 { |
| compatible = "marvell,cp110-utmi-phy"; |
| reg = <0x580000 0x2000>; |
| marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| CP11X_LABEL(utmi0): usb-phy@0 { |
| reg = <0>; |
| #phy-cells = <0>; |
| }; |
| |
| CP11X_LABEL(utmi1): usb-phy@1 { |
| reg = <1>; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| CP11X_LABEL(usb3_0): usb@500000 { |
| compatible = "marvell,armada-8k-xhci", |
| "generic-xhci"; |
| reg = <0x500000 0x4000>; |
| dma-coherent; |
| interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 22>, |
| <&CP11X_LABEL(clk) 1 16>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(usb3_1): usb@510000 { |
| compatible = "marvell,armada-8k-xhci", |
| "generic-xhci"; |
| reg = <0x510000 0x4000>; |
| dma-coherent; |
| interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 23>, |
| <&CP11X_LABEL(clk) 1 16>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(sata0): sata@540000 { |
| compatible = "marvell,armada-8k-ahci", |
| "generic-ahci"; |
| reg = <0x540000 0x30000>; |
| dma-coherent; |
| interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&CP11X_LABEL(clk) 1 15>, |
| <&CP11X_LABEL(clk) 1 16>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata-port@0 { |
| reg = <0>; |
| }; |
| |
| sata-port@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| CP11X_LABEL(xor0): xor@6a0000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; |
| dma-coherent; |
| msi-parent = <&gic_v2m0>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 8>, |
| <&CP11X_LABEL(clk) 1 14>; |
| }; |
| |
| CP11X_LABEL(xor1): xor@6c0000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; |
| dma-coherent; |
| msi-parent = <&gic_v2m0>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 7>, |
| <&CP11X_LABEL(clk) 1 14>; |
| }; |
| |
| CP11X_LABEL(spi0): spi@700600 { |
| compatible = "marvell,armada-380-spi"; |
| reg = <0x700600 0x50>; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| clock-names = "core", "axi"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(spi1): spi@700680 { |
| compatible = "marvell,armada-380-spi"; |
| reg = <0x700680 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "core", "axi"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(i2c0): i2c@701000 { |
| compatible = "marvell,mv78230-i2c"; |
| reg = <0x701000 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(i2c1): i2c@701100 { |
| compatible = "marvell,mv78230-i2c"; |
| reg = <0x701100 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(uart0): serial@702000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x702000 0x100>; |
| reg-shift = <2>; |
| interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clock-names = "baudclk", "apb_pclk"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(uart1): serial@702100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x702100 0x100>; |
| reg-shift = <2>; |
| interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clock-names = "baudclk", "apb_pclk"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(uart2): serial@702200 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x702200 0x100>; |
| reg-shift = <2>; |
| interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clock-names = "baudclk", "apb_pclk"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(uart3): serial@702300 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x702300 0x100>; |
| reg-shift = <2>; |
| interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clock-names = "baudclk", "apb_pclk"; |
| clocks = <&CP11X_LABEL(clk) 1 21>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(nand_controller): nand-controller@720000 { |
| /* |
| * Due to the limitation of the pins available |
| * this controller is only usable on the CPM |
| * for A7K and on the CPS for A8K. |
| */ |
| compatible = "marvell,armada-8k-nand-controller", |
| "marvell,armada370-nand-controller"; |
| reg = <0x720000 0x54>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 2>, |
| <&CP11X_LABEL(clk) 1 17>; |
| marvell,system-controller = <&CP11X_LABEL(syscon0)>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(trng): trng@760000 { |
| compatible = "marvell,armada-8k-rng", |
| "inside-secure,safexcel-eip76"; |
| reg = <0x760000 0x7d>; |
| interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 25>, |
| <&CP11X_LABEL(clk) 1 17>; |
| status = "okay"; |
| }; |
| |
| CP11X_LABEL(sdhci0): mmc@780000 { |
| compatible = "marvell,armada-cp110-sdhci"; |
| reg = <0x780000 0x300>; |
| interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "axi"; |
| clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(crypto): crypto@800000 { |
| compatible = "inside-secure,safexcel-eip197b"; |
| reg = <0x800000 0x200000>; |
| interrupts = <88 IRQ_TYPE_LEVEL_HIGH>, |
| <89 IRQ_TYPE_LEVEL_HIGH>, |
| <90 IRQ_TYPE_LEVEL_HIGH>, |
| <91 IRQ_TYPE_LEVEL_HIGH>, |
| <92 IRQ_TYPE_LEVEL_HIGH>, |
| <87 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "ring0", "ring1", "ring2", "ring3", |
| "eip", "mem"; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 26>, |
| <&CP11X_LABEL(clk) 1 17>; |
| dma-coherent; |
| }; |
| }; |
| |
| CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { |
| compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; |
| reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, |
| <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; |
| reg-names = "ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| device_type = "pci"; |
| dma-coherent; |
| msi-parent = <&gic_v2m0>; |
| |
| bus-range = <0 0xff>; |
| /* non-prefetchable memory */ |
| ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; |
| interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; |
| num-lanes = <1>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { |
| compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; |
| reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, |
| <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; |
| reg-names = "ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| device_type = "pci"; |
| dma-coherent; |
| msi-parent = <&gic_v2m0>; |
| |
| bus-range = <0 0xff>; |
| /* non-prefetchable memory */ |
| ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; |
| interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; |
| |
| num-lanes = <1>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; |
| status = "disabled"; |
| }; |
| |
| CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { |
| compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; |
| reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, |
| <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; |
| reg-names = "ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| device_type = "pci"; |
| dma-coherent; |
| msi-parent = <&gic_v2m0>; |
| |
| bus-range = <0 0xff>; |
| /* non-prefetchable memory */ |
| ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; |
| interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; |
| |
| num-lanes = <1>; |
| clock-names = "core", "reg"; |
| clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; |
| status = "disabled"; |
| }; |
| }; |
