| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright (C) 2023 MediaTek Inc. |
| * Author: Chris Chen <chris-qj.chen@mediatek.com> |
| * Pablo Sun <pablo.sun@mediatek.com> |
| * Macpaul Lin <macpaul.lin@mediatek.com> |
| */ |
| /dts-v1/; |
| |
| #include "mt8188.dtsi" |
| #include "mt6359.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> |
| #include <dt-bindings/regulator/mediatek,mt6360-regulator.h> |
| #include <dt-bindings/spmi/spmi.h> |
| #include <dt-bindings/usb/pd.h> |
| |
| / { |
| model = "MediaTek Genio-700 EVK"; |
| compatible = "mediatek,mt8390-evk", "mediatek,mt8390", |
| "mediatek,mt8188"; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:921600n8"; |
| }; |
| |
| firmware { |
| optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| }; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0 0x40000000 0x2 0x00000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* |
| * 12 MiB reserved for OP-TEE (BL32) |
| * +-----------------------+ 0x43e0_0000 |
| * | SHMEM 2MiB | |
| * +-----------------------+ 0x43c0_0000 |
| * | | TA_RAM 8MiB | |
| * + TZDRAM +--------------+ 0x4340_0000 |
| * | | TEE_RAM 2MiB | |
| * +-----------------------+ 0x4320_0000 |
| */ |
| optee_reserved: optee@43200000 { |
| no-map; |
| reg = <0 0x43200000 0 0x00c00000>; |
| }; |
| |
| scp_mem: memory@50000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0x50000000 0 0x2900000>; |
| no-map; |
| }; |
| |
| /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ |
| bl31_secmon_reserved: memory@54600000 { |
| no-map; |
| reg = <0 0x54600000 0x0 0x200000>; |
| }; |
| |
| apu_mem: memory@55000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0x55000000 0 0x1400000>; /* 20 MB */ |
| }; |
| |
| vpu_mem: memory@57000000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0x57000000 0 0x1400000>; /* 20 MB */ |
| }; |
| }; |
| |
| common_fixed_5v: regulator-0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "5v_en"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&pio 10 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| edp_panel_fixed_3v3: regulator-1 { |
| compatible = "regulator-fixed"; |
| regulator-name = "edp_panel_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| enable-active-high; |
| gpio = <&pio 15 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&edp_panel_3v3_en_pins>; |
| }; |
| |
| gpio_fixed_3v3: regulator-2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "gpio_3v3_en"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&pio 9 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| sdio_fixed_1v8: regulator-3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "sdio_io"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| sdio_fixed_3v3: regulator-4 { |
| compatible = "regulator-fixed"; |
| regulator-name = "sdio_card"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&pio 74 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| touch0_fixed_3v3: regulator-5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "touch_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&pio 119 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| usb_hub_fixed_3v3: regulator-6 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_hub_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */ |
| startup-delay-us = <10000>; |
| enable-active-high; |
| }; |
| |
| usb_hub_reset_1v8: regulator-7 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_hub_reset"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */ |
| vin-supply = <&usb_hub_fixed_3v3>; |
| }; |
| |
| usb_p0_vbus: regulator-8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_p0_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&pio 84 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| usb_p1_vbus: regulator-9 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_p1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&pio 87 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| usb_p2_vbus: regulator-10 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_p2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| }; |
| }; |
| |
| &i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| touchscreen@5d { |
| compatible = "goodix,gt9271"; |
| reg = <0x5d>; |
| interrupt-parent = <&pio>; |
| interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_RISING>; |
| irq-gpios = <&pio 6 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; |
| AVDD28-supply = <&touch0_fixed_3v3>; |
| VDDIO-supply = <&mt6359_vio18_ldo_reg>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&touch_pins>; |
| }; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_pins>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_pins>; |
| pinctrl-1 = <&rt1715_int_pins>; |
| clock-frequency = <1000000>; |
| status = "okay"; |
| }; |
| |
| &i2c5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_pins>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &i2c6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_pins>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| status = "okay"; |
| pinctrl-names = "default", "state_uhs"; |
| pinctrl-0 = <&mmc0_default_pins>; |
| pinctrl-1 = <&mmc0_uhs_pins>; |
| bus-width = <8>; |
| max-frequency = <200000000>; |
| cap-mmc-highspeed; |
| mmc-hs200-1_8v; |
| mmc-hs400-1_8v; |
| supports-cqe; |
| cap-mmc-hw-reset; |
| no-sdio; |
| no-sd; |
| hs400-ds-delay = <0x1481b>; |
| vmmc-supply = <&mt6359_vemc_1_ldo_reg>; |
| vqmmc-supply = <&mt6359_vufs_ldo_reg>; |
| non-removable; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| pinctrl-names = "default", "state_uhs"; |
| pinctrl-0 = <&mmc1_default_pins>; |
| pinctrl-1 = <&mmc1_uhs_pins>; |
| bus-width = <4>; |
| max-frequency = <200000000>; |
| cap-sd-highspeed; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| no-mmc; |
| no-sdio; |
| cd-gpios = <&pio 2 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <&mt6359_vpa_buck_reg>; |
| vqmmc-supply = <&mt6359_vsim1_ldo_reg>; |
| }; |
| |
| &mt6359_vbbck_ldo_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359_vcn18_ldo_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359_vcn33_2_bt_ldo_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359_vcore_buck_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359_vgpu11_buck_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359_vpa_buck_reg { |
| regulator-max-microvolt = <3100000>; |
| }; |
| |
| &mt6359_vpu_buck_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359_vrf12_ldo_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359_vsim1_ldo_reg { |
| regulator-enable-ramp-delay = <480>; |
| }; |
| |
| &mt6359_vufs_ldo_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6359codec { |
| mediatek,mic-type-0 = <1>; /* ACC */ |
| mediatek,mic-type-1 = <3>; /* DCC */ |
| }; |
| |
| &pio { |
| audio_default_pins: audio-default-pins { |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO101__FUNC_O_AUD_CLK_MOSI>, |
| <PINMUX_GPIO102__FUNC_O_AUD_SYNC_MOSI>, |
| <PINMUX_GPIO103__FUNC_O_AUD_DAT_MOSI0>, |
| <PINMUX_GPIO104__FUNC_O_AUD_DAT_MOSI1>, |
| <PINMUX_GPIO105__FUNC_I0_AUD_DAT_MISO0>, |
| <PINMUX_GPIO106__FUNC_I0_AUD_DAT_MISO1>, |
| <PINMUX_GPIO107__FUNC_B0_I2SIN_MCK>, |
| <PINMUX_GPIO108__FUNC_B0_I2SIN_BCK>, |
| <PINMUX_GPIO109__FUNC_B0_I2SIN_WS>, |
| <PINMUX_GPIO110__FUNC_I0_I2SIN_D0>, |
| <PINMUX_GPIO114__FUNC_O_I2SO2_MCK>, |
| <PINMUX_GPIO115__FUNC_B0_I2SO2_BCK>, |
| <PINMUX_GPIO116__FUNC_B0_I2SO2_WS>, |
| <PINMUX_GPIO117__FUNC_O_I2SO2_D0>, |
| <PINMUX_GPIO118__FUNC_O_I2SO2_D1>, |
| <PINMUX_GPIO121__FUNC_B0_PCM_CLK>, |
| <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>, |
| <PINMUX_GPIO124__FUNC_I0_PCM_DI>, |
| <PINMUX_GPIO125__FUNC_O_DMIC1_CLK>, |
| <PINMUX_GPIO126__FUNC_I0_DMIC1_DAT>, |
| <PINMUX_GPIO128__FUNC_O_DMIC2_CLK>, |
| <PINMUX_GPIO129__FUNC_I0_DMIC2_DAT>; |
| }; |
| }; |
| |
| dptx_pins: dptx-pins { |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO46__FUNC_I0_DP_TX_HPD>; |
| bias-pull-up; |
| }; |
| }; |
| |
| edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { |
| pins1 { |
| pinmux = <PINMUX_GPIO15__FUNC_B_GPIO15>; |
| output-high; |
| }; |
| }; |
| |
| eth_default_pins: eth-default-pins { |
| pins-cc { |
| pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>, |
| <PINMUX_GPIO140__FUNC_I0_GBE_RXC>, |
| <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>, |
| <PINMUX_GPIO142__FUNC_O_GBE_TXEN>; |
| drive-strength = <8>; |
| }; |
| |
| pins-mdio { |
| pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>, |
| <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>; |
| drive-strength = <8>; |
| input-enable; |
| }; |
| |
| pins-power { |
| pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>, |
| <PINMUX_GPIO146__FUNC_B_GPIO146>; |
| output-high; |
| }; |
| |
| pins-rxd { |
| pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>, |
| <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>, |
| <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>, |
| <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>; |
| drive-strength = <8>; |
| }; |
| |
| pins-txd { |
| pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>, |
| <PINMUX_GPIO132__FUNC_O_GBE_TXD2>, |
| <PINMUX_GPIO133__FUNC_O_GBE_TXD1>, |
| <PINMUX_GPIO134__FUNC_O_GBE_TXD0>; |
| drive-strength = <8>; |
| }; |
| }; |
| |
| eth_sleep_pins: eth-sleep-pins { |
| pins-cc { |
| pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>, |
| <PINMUX_GPIO140__FUNC_B_GPIO140>, |
| <PINMUX_GPIO141__FUNC_B_GPIO141>, |
| <PINMUX_GPIO142__FUNC_B_GPIO142>; |
| }; |
| |
| pins-mdio { |
| pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>, |
| <PINMUX_GPIO144__FUNC_B_GPIO144>; |
| input-disable; |
| bias-disable; |
| }; |
| |
| pins-rxd { |
| pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>, |
| <PINMUX_GPIO136__FUNC_B_GPIO136>, |
| <PINMUX_GPIO137__FUNC_B_GPIO137>, |
| <PINMUX_GPIO138__FUNC_B_GPIO138>; |
| }; |
| |
| pins-txd { |
| pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>, |
| <PINMUX_GPIO132__FUNC_B_GPIO132>, |
| <PINMUX_GPIO133__FUNC_B_GPIO133>, |
| <PINMUX_GPIO134__FUNC_B_GPIO134>; |
| }; |
| }; |
| |
| i2c0_pins: i2c0-pins { |
| pins { |
| pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, |
| <PINMUX_GPIO55__FUNC_B1_SCL0>; |
| bias-pull-up = <MTK_PULL_SET_RSEL_011>; |
| drive-strength-microamp = <1000>; |
| }; |
| }; |
| |
| i2c1_pins: i2c1-pins { |
| pins { |
| pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, |
| <PINMUX_GPIO57__FUNC_B1_SCL1>; |
| bias-pull-up = <MTK_PULL_SET_RSEL_011>; |
| drive-strength-microamp = <1000>; |
| }; |
| }; |
| |
| i2c2_pins: i2c2-pins { |
| pins { |
| pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, |
| <PINMUX_GPIO59__FUNC_B1_SCL2>; |
| bias-pull-up = <MTK_PULL_SET_RSEL_011>; |
| drive-strength-microamp = <1000>; |
| }; |
| }; |
| |
| i2c3_pins: i2c3-pins { |
| pins { |
| pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, |
| <PINMUX_GPIO61__FUNC_B1_SCL3>; |
| bias-pull-up = <MTK_PULL_SET_RSEL_011>; |
| drive-strength-microamp = <1000>; |
| }; |
| }; |
| |
| i2c4_pins: i2c4-pins { |
| pins { |
| pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, |
| <PINMUX_GPIO63__FUNC_B1_SCL4>; |
| bias-pull-up = <MTK_PULL_SET_RSEL_011>; |
| drive-strength-microamp = <1000>; |
| }; |
| }; |
| |
| i2c5_pins: i2c5-pins { |
| pins { |
| pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, |
| <PINMUX_GPIO65__FUNC_B1_SCL5>; |
| bias-pull-up = <MTK_PULL_SET_RSEL_011>; |
| drive-strength-microamp = <1000>; |
| }; |
| }; |
| |
| i2c6_pins: i2c6-pins { |
| pins { |
| pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, |
| <PINMUX_GPIO67__FUNC_B1_SCL6>; |
| bias-pull-up = <MTK_PULL_SET_RSEL_011>; |
| drive-strength-microamp = <1000>; |
| }; |
| }; |
| |
| gpio_key_pins: gpio-key-pins { |
| pins { |
| pinmux = <PINMUX_GPIO42__FUNC_B1_KPCOL0>, |
| <PINMUX_GPIO43__FUNC_B1_KPCOL1>, |
| <PINMUX_GPIO44__FUNC_B1_KPROW0>; |
| }; |
| }; |
| |
| mmc0_default_pins: mmc0-default-pins { |
| pins-clk { |
| pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; |
| drive-strength = <6>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, |
| <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, |
| <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, |
| <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, |
| <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, |
| <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, |
| <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, |
| <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, |
| <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; |
| input-enable; |
| drive-strength = <6>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins-rst { |
| pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; |
| drive-strength = <6>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc0_uhs_pins: mmc0-uhs-pins { |
| pins-clk { |
| pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; |
| drive-strength = <8>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, |
| <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, |
| <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, |
| <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, |
| <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, |
| <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, |
| <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, |
| <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, |
| <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; |
| input-enable; |
| drive-strength = <8>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins-ds { |
| pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; |
| drive-strength = <8>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins-rst { |
| pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; |
| drive-strength = <8>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc1_default_pins: mmc1-default-pins { |
| pins-clk { |
| pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; |
| drive-strength = <6>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, |
| <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, |
| <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, |
| <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, |
| <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; |
| input-enable; |
| drive-strength = <6>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins-insert { |
| pinmux = <PINMUX_GPIO2__FUNC_B_GPIO2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| mmc1_uhs_pins: mmc1-uhs-pins { |
| pins-clk { |
| pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>; |
| drive-strength = <6>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO163__FUNC_B1_MSDC1_CMD>, |
| <PINMUX_GPIO165__FUNC_B1_MSDC1_DAT0>, |
| <PINMUX_GPIO166__FUNC_B1_MSDC1_DAT1>, |
| <PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>, |
| <PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>; |
| input-enable; |
| drive-strength = <6>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc2_default_pins: mmc2-default-pins { |
| pins-clk { |
| pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; |
| drive-strength = <4>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, |
| <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, |
| <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, |
| <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, |
| <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; |
| input-enable; |
| drive-strength = <6>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| |
| pins-pcm { |
| pinmux = <PINMUX_GPIO123__FUNC_O_PCM_DO>; |
| }; |
| }; |
| |
| mmc2_uhs_pins: mmc2-uhs-pins { |
| pins-clk { |
| pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>; |
| drive-strength = <4>; |
| bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| }; |
| |
| pins-cmd-dat { |
| pinmux = <PINMUX_GPIO169__FUNC_B1_MSDC2_CMD>, |
| <PINMUX_GPIO171__FUNC_B1_MSDC2_DAT0>, |
| <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>, |
| <PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>, |
| <PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>; |
| input-enable; |
| drive-strength = <6>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc2_eint_pins: mmc2-eint-pins { |
| pins-dat1 { |
| pinmux = <PINMUX_GPIO172__FUNC_B_GPIO172>; |
| input-enable; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| mmc2_dat1_pins: mmc2-dat1-pins { |
| pins-dat1 { |
| pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>; |
| input-enable; |
| drive-strength = <6>; |
| bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| }; |
| }; |
| |
| panel_default_pins: panel-default-pins { |
| pins-dcdc { |
| pinmux = <PINMUX_GPIO45__FUNC_B_GPIO45>; |
| output-low; |
| }; |
| |
| pins-en { |
| pinmux = <PINMUX_GPIO111__FUNC_B_GPIO111>; |
| output-low; |
| }; |
| |
| pins-rst { |
| pinmux = <PINMUX_GPIO25__FUNC_B_GPIO25>; |
| output-high; |
| }; |
| }; |
| |
| rt1715_int_pins: rt1715-int-pins { |
| pins_cmd0_dat { |
| pinmux = <PINMUX_GPIO12__FUNC_B_GPIO12>; |
| bias-pull-up; |
| input-enable; |
| }; |
| }; |
| |
| spi0_pins: spi0-pins { |
| pins-spi { |
| pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, |
| <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, |
| <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, |
| <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; |
| bias-disable; |
| }; |
| }; |
| |
| spi1_pins: spi1-pins { |
| pins-spi { |
| pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, |
| <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, |
| <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, |
| <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; |
| bias-disable; |
| }; |
| }; |
| |
| spi2_pins: spi2-pins { |
| pins-spi { |
| pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, |
| <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, |
| <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, |
| <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; |
| bias-disable; |
| }; |
| }; |
| |
| touch_pins: touch-pins { |
| pins-irq { |
| pinmux = <PINMUX_GPIO6__FUNC_B_GPIO6>; |
| input-enable; |
| bias-disable; |
| }; |
| |
| pins-reset { |
| pinmux = <PINMUX_GPIO5__FUNC_B_GPIO5>; |
| output-high; |
| }; |
| }; |
| |
| uart0_pins: uart0-pins { |
| pins { |
| pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, |
| <PINMUX_GPIO32__FUNC_I1_URXD0>; |
| bias-pull-up; |
| }; |
| }; |
| |
| uart1_pins: uart1-pins { |
| pins { |
| pinmux = <PINMUX_GPIO33__FUNC_O_UTXD1>, |
| <PINMUX_GPIO34__FUNC_I1_URXD1>; |
| bias-pull-up; |
| }; |
| }; |
| |
| uart2_pins: uart2-pins { |
| pins { |
| pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>, |
| <PINMUX_GPIO36__FUNC_I1_URXD2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| usb_default_pins: usb-default-pins { |
| pins-iddig { |
| pinmux = <PINMUX_GPIO83__FUNC_B_GPIO83>; |
| input-enable; |
| bias-pull-up; |
| }; |
| |
| pins-valid { |
| pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>; |
| input-enable; |
| }; |
| |
| pins-vbus { |
| pinmux = <PINMUX_GPIO84__FUNC_O_USB_DRVVBUS>; |
| output-high; |
| }; |
| |
| }; |
| |
| usb1_default_pins: usb1-default-pins { |
| pins-valid { |
| pinmux = <PINMUX_GPIO88__FUNC_I0_VBUSVALID_1P>; |
| input-enable; |
| }; |
| |
| pins-usb-hub-3v3-en { |
| pinmux = <PINMUX_GPIO112__FUNC_B_GPIO112>; |
| output-high; |
| }; |
| }; |
| |
| wifi_pwrseq_pins: wifi-pwrseq-pins { |
| pins-wifi-enable { |
| pinmux = <PINMUX_GPIO127__FUNC_B_GPIO127>; |
| output-low; |
| }; |
| }; |
| }; |
| |
| &pmic { |
| interrupt-parent = <&pio>; |
| interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| &scp { |
| memory-region = <&scp_mem>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| pinctrl-0 = <&uart0_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-0 = <&uart1_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-0 = <&uart2_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &spi2 { |
| pinctrl-0 = <&spi2_pins>; |
| pinctrl-names = "default"; |
| mediatek,pad-select = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| }; |
| |
| &u3phy0 { |
| status = "okay"; |
| }; |
| |
| &u3phy1 { |
| status = "okay"; |
| }; |
| |
| &u3phy2 { |
| status = "okay"; |
| }; |
| |
| &xhci0 { |
| status = "okay"; |
| vusb33-supply = <&mt6359_vusb_ldo_reg>; |
| }; |
| |
| &xhci1 { |
| status = "okay"; |
| vusb33-supply = <&mt6359_vusb_ldo_reg>; |
| vbus-supply = <&usb_hub_reset_1v8>; |
| }; |
| |
| &xhci2 { |
| status = "okay"; |
| vusb33-supply = <&mt6359_vusb_ldo_reg>; |
| }; |
