| // SPDX-License-Identifier: GPL-2.0-only |
| |
| /dts-v1/; |
| |
| #include "msm8916-pm8916.dtsi" |
| #include "msm8916-modem-qdsp6.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| |
| / { |
| model = "BQ Aquaris X5 (Longcheer L8910)"; |
| compatible = "longcheer,l8910", "qcom,msm8916"; |
| chassis-type = "handset"; |
| |
| aliases { |
| mmc0 = &sdhc_1; /* eMMC */ |
| mmc1 = &sdhc_2; /* SD card */ |
| serial0 = &blsp_uart2; |
| }; |
| |
| chosen { |
| stdout-path = "serial0"; |
| }; |
| |
| speaker_amp: audio-amplifier { |
| compatible = "awinic,aw8738"; |
| mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>; |
| awinic,mode = <5>; |
| sound-name-prefix = "Speaker Amp"; |
| |
| pinctrl-0 = <&spk_ext_pa_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| flash-led-controller { |
| compatible = "ocs,ocp8110"; |
| enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; |
| flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&camera_front_flash_default>; |
| pinctrl-names = "default"; |
| |
| flash_led: led { |
| function = LED_FUNCTION_FLASH; |
| color = <LED_COLOR_ID_WHITE>; |
| flash-max-timeout-us = <250000>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_keys_default>; |
| |
| label = "GPIO Buttons"; |
| |
| button-volume-up { |
| label = "Volume Up"; |
| gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led-0 { |
| gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; |
| color = <LED_COLOR_ID_WHITE>; |
| default-state = "off"; |
| function = LED_FUNCTION_KBD_BACKLIGHT; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&button_backlight_default>; |
| }; |
| }; |
| |
| usb_id: usb-id { |
| compatible = "linux,extcon-usb-gpio"; |
| id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_id_default>; |
| }; |
| }; |
| |
| &blsp_i2c2 { |
| status = "okay"; |
| |
| led-controller@30 { |
| compatible = "kinetic,ktd2026"; |
| reg = <0x30>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| vin-supply = <&pm8916_l17>; |
| vio-supply = <&pm8916_l6>; |
| |
| pinctrl-0 = <&status_led_default>; |
| pinctrl-names = "default"; |
| |
| multi-led { |
| color = <LED_COLOR_ID_RGB>; |
| function = LED_FUNCTION_STATUS; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| color = <LED_COLOR_ID_RED>; |
| }; |
| |
| led@1 { |
| reg = <1>; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@2 { |
| reg = <2>; |
| color = <LED_COLOR_ID_BLUE>; |
| }; |
| }; |
| }; |
| |
| flash-led-controller@53 { |
| compatible = "silergy,sy7802"; |
| reg = <0x53>; |
| |
| enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-0 = <&camera_rear_flash_default>; |
| pinctrl-names = "default"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| function = LED_FUNCTION_FLASH; |
| color = <LED_COLOR_ID_WHITE>; |
| led-sources = <0>, <1>; |
| }; |
| }; |
| }; |
| |
| &blsp_i2c3 { |
| status = "okay"; |
| |
| magnetometer@d { |
| compatible = "asahi-kasei,ak09911"; |
| reg = <0x0d>; |
| |
| vdd-supply = <&pm8916_l17>; |
| vid-supply = <&pm8916_l6>; |
| |
| reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mag_reset_default>; |
| }; |
| |
| imu@68 { |
| compatible = "bosch,bmi160"; |
| reg = <0x68>; |
| |
| vdd-supply = <&pm8916_l17>; |
| vddio-supply = <&pm8916_l6>; |
| |
| mount-matrix = "0", "1", "0", |
| "-1", "0", "0", |
| "0", "0", "1"; |
| }; |
| }; |
| |
| &blsp_uart2 { |
| status = "okay"; |
| }; |
| |
| &mpss_mem { |
| reg = <0x0 0x86800000 0x0 0x5000000>; |
| }; |
| |
| &pm8916_codec { |
| qcom,micbias-lvl = <2800>; |
| qcom,mbhc-vthreshold-low = <75 100 120 180 500>; |
| qcom,mbhc-vthreshold-high = <75 100 120 180 500>; |
| qcom,hphl-jack-type-normally-open; |
| }; |
| |
| &pm8916_gpios { |
| status_led_default: status-led-default-state { |
| pins = "gpio3"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| power-source = <PM8916_GPIO_VPH>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| &pm8916_resin { |
| status = "okay"; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| |
| &pm8916_rpm_regulators { |
| pm8916_l17: l17 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| }; |
| }; |
| |
| &pm8916_vib { |
| status = "okay"; |
| }; |
| |
| &sdhc_1 { |
| status = "okay"; |
| }; |
| |
| &sdhc_2 { |
| status = "okay"; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc2_default &sdc2_cd_default>; |
| pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; |
| |
| cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &sound { |
| /* |
| * Provide widgets/pin-switches to allow enabling speaker separately. |
| * The hardware does not provide a way to disable the output via the |
| * headphone jack when the speaker is enabled. |
| */ |
| model = "bq-paella"; |
| widgets = |
| "Speaker", "Speaker", |
| "Headphone", "Headphones"; |
| pin-switches = "Speaker"; |
| audio-routing = |
| "Speaker", "Speaker Amp OUT", |
| "Speaker Amp IN", "HPH_R", |
| "Headphones", "HPH_L", |
| "Headphones", "HPH_R", |
| "AMIC1", "MIC BIAS External1", |
| "AMIC2", "MIC BIAS Internal2", |
| "AMIC3", "MIC BIAS External1"; |
| aux-devs = <&speaker_amp>; |
| }; |
| |
| &usb { |
| status = "okay"; |
| extcon = <&usb_id>, <&usb_id>; |
| }; |
| |
| &usb_hs_phy { |
| extcon = <&usb_id>; |
| }; |
| |
| &venus { |
| status = "okay"; |
| }; |
| |
| &venus_mem { |
| status = "okay"; |
| }; |
| |
| &wcnss { |
| status = "okay"; |
| }; |
| |
| &wcnss_iris { |
| compatible = "qcom,wcn3620"; |
| }; |
| |
| &wcnss_mem { |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| button_backlight_default: button-backlight-default-state { |
| pins = "gpio17"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| camera_front_flash_default: camera-front-flash-default-state { |
| pins = "gpio49", "gpio119"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| camera_rear_flash_default: camera-rear-flash-default-state { |
| pins = "gpio9", "gpio16", "gpio117"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| gpio_keys_default: gpio-keys-default-state { |
| pins = "gpio107"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| mag_reset_default: mag-reset-default-state { |
| pins = "gpio111"; |
| function = "gpio"; |
| |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| sdc2_cd_default: sdc2-cd-default-state { |
| pins = "gpio38"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| spk_ext_pa_default: spk-ext-pa-default-state { |
| pins = "gpio114"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| usb_id_default: usb-id-default-state { |
| pins = "gpio110"; |
| function = "gpio"; |
| |
| drive-strength = <8>; |
| bias-pull-up; |
| }; |
| }; |
