| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> |
| */ |
| |
| #include "pm8994.dtsi" |
| #include "pmi8994.dtsi" |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| |
| / { |
| divclk1_cdc: divclk1 { |
| compatible = "gpio-gate-clock"; |
| clocks = <&rpmcc RPM_SMD_DIV_CLK1>; |
| #clock-cells = <0>; |
| enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&divclk1_default>; |
| }; |
| |
| divclk4: divclk4 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "divclk4"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&divclk4_pin_a>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| key-vol-up { |
| label = "Volume Up"; |
| gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEUP>; |
| wakeup-source; |
| debounce-interval = <15>; |
| }; |
| |
| key-dome { |
| label = "Home"; |
| gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_HOME>; |
| wakeup-source; |
| debounce-interval = <15>; |
| }; |
| }; |
| |
| irled { |
| compatible = "pwm-ir-tx"; |
| pwms = <&pm8994_lpg 1 1000000>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&irled_default>; |
| }; |
| |
| reserved-memory { |
| memory@88800000 { |
| reg = <0x0 0x88800000 0x0 0x1400000>; |
| no-map; |
| }; |
| |
| /* This platform has all PIL regions offset by 0x1400000 */ |
| /delete-node/ mpss@88800000; |
| mpss_mem: mpss@89c00000 { |
| reg = <0x0 0x89c00000 0x0 0x6200000>; |
| no-map; |
| }; |
| |
| /delete-node/ adsp@8ea00000; |
| adsp_mem: adsp@8fe00000 { |
| reg = <0x0 0x8fe00000 0x0 0x1b00000>; |
| no-map; |
| }; |
| |
| /delete-node/ slpi@90500000; |
| slpi_mem: slpi@91900000 { |
| reg = <0x0 0x91900000 0x0 0xa00000>; |
| no-map; |
| }; |
| |
| /delete-node/ gpu@90f00000; |
| gpu_mem: gpu@92300000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x92300000 0x0 0x2000>; |
| no-map; |
| }; |
| |
| /delete-node/ venus@91000000; |
| venus_mem: venus@92400000 { |
| reg = <0x0 0x92400000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| ramoops@92900000 { |
| compatible = "ramoops"; |
| reg = <0x0 0x92900000 0x0 0x100000>; |
| no-map; |
| |
| record-size = <0x8000>; |
| console-size = <0x80000>; |
| ftrace-size = <0x20000>; |
| pmsg-size = <0x40000>; |
| }; |
| |
| /delete-node/ rmtfs; |
| rmtfs@f6c00000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0 0xf6c00000 0 0x200000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; |
| }; |
| |
| /delete-node/ mba@91500000; |
| mba_mem: mba@f6f00000 { |
| reg = <0x0 0xf6f00000 0x0 0x100000>; |
| no-map; |
| }; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3800000>; |
| regulator-max-microvolt = <3800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_3v2_tp: vdd-3v2-tp { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_3v2_tp"; |
| regulator-min-microvolt = <3200000>; |
| regulator-max-microvolt = <3200000>; |
| startup-delay-us = <4000>; |
| vin-supply = <&vph_pwr>; |
| |
| gpio = <&tlmm 73 0>; |
| enable-active-high; |
| }; |
| |
| vdd_3v3: rome-vreg { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| startup-delay-us = <4000>; |
| vin-supply = <&vph_pwr_bbyp>; |
| |
| gpio = <&pm8994_gpios 9 0>; |
| enable-active-high; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rome_enable_default>; |
| |
| /* Required by QCA6174a - vddpe-3v3 */ |
| regulator-always-on; |
| }; |
| |
| /* WL_EN pin defined as a fixed regulator */ |
| wlan_en: wlan-en-1-8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "wlan-en-regulator"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| gpio = <&pm8994_gpios 8 0>; |
| /* WLAN card specific delay */ |
| startup-delay-us = <70000>; |
| enable-active-high; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wlan_en_default>; |
| }; |
| }; |
| |
| &adsp_pil { |
| status = "okay"; |
| }; |
| |
| &blsp2_i2c2 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| nfc: nfc@28 { |
| compatible = "nxp,nxp-nci-i2c"; |
| |
| reg = <0x28>; |
| |
| interrupt-parent = <&tlmm>; |
| interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; |
| firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&nfc_default>; |
| }; |
| }; |
| |
| &blsp2_i2c3 { |
| status = "okay"; |
| |
| typec: typec@47 { |
| compatible = "ti,tusb320l"; |
| reg = <0x47>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <63 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| &blsp2_i2c6 { |
| status = "okay"; |
| /* MSM_TS */ |
| }; |
| |
| &blsp1_uart2 { |
| status = "okay"; |
| label = "QCA_UART"; |
| |
| bluetooth: bluetooth { |
| compatible = "qcom,qca6174-bt"; |
| |
| enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; |
| clocks = <&divclk4>; |
| }; |
| }; |
| |
| &gpu { |
| status = "okay"; |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &mdss_dsi0 { |
| status = "okay"; |
| |
| vdd-supply = <&vreg_l2a_1p25>; |
| vddio-supply = <&vreg_l14a_1p8>; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; |
| pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; |
| }; |
| |
| &mdss_dsi0_out { |
| status = "okay"; |
| |
| data-lanes = <0 1 2 3>; |
| }; |
| |
| &mdss_dsi0_phy { |
| status = "okay"; |
| |
| vcca-supply = <&vreg_l28a_0p925>; |
| }; |
| |
| &mmcc { |
| vdd-gfx-supply = <&vdd_gfx>; |
| }; |
| |
| &mss_pil { |
| status = "okay"; |
| |
| pll-supply = <&vreg_l12a_1p8>; |
| }; |
| |
| &pcie0 { |
| status = "okay"; |
| |
| /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ |
| vddpe-3v3-supply = <&wlan_en>; |
| vdda-supply = <&vreg_l28a_0p925>; |
| |
| perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; |
| wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &pcie_phy { |
| status = "okay"; |
| |
| vdda-phy-supply = <&vreg_l28a_0p925>; |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| }; |
| |
| &pm8994_resin { |
| status = "okay"; |
| |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| |
| &pm8994_lpg { |
| status = "okay"; |
| |
| qcom,power-source = <1>; |
| }; |
| |
| &pmi8994_lpg { |
| status = "okay"; |
| |
| qcom,power-source = <1>; |
| |
| multi-led { |
| color = <LED_COLOR_ID_RGB>; |
| function = LED_FUNCTION_STATUS; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@1 { |
| reg = <1>; |
| color = <LED_COLOR_ID_BLUE>; |
| }; |
| |
| led@2 { |
| reg = <2>; |
| color = <LED_COLOR_ID_GREEN>; |
| }; |
| |
| led@3 { |
| reg = <3>; |
| color = <LED_COLOR_ID_RED>; |
| }; |
| }; |
| }; |
| |
| &slim_msm { |
| status = "okay"; |
| |
| slim@1 { |
| reg = <1>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| tasha_ifd: tas-ifd@0,0 { |
| compatible = "slim217,1a0"; |
| reg = <0 0>; |
| }; |
| |
| wcd9335: codec@1,0 { |
| compatible = "slim217,1a0"; |
| reg = <1 0>; |
| |
| clock-names = "mclk", "slimbus"; |
| clocks = <&divclk1_cdc>, |
| <&rpmcc RPM_SMD_BB_CLK1>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, |
| <53 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "intr1", "intr2"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; |
| pinctrl-names = "default"; |
| |
| reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; |
| slim-ifc-dev = <&tasha_ifd>; |
| |
| #sound-dai-cells = <1>; |
| |
| vdd-buck-supply = <&vreg_s4a_1p8>; |
| vdd-buck-sido-supply = <&vreg_s4a_1p8>; |
| vdd-rx-supply = <&vreg_s4a_1p8>; |
| vdd-tx-supply = <&vreg_s4a_1p8>; |
| vdd-vbat-supply = <&vph_pwr>; |
| vdd-micbias-supply = <&vph_pwr_bbyp>; |
| vdd-io-supply = <&vreg_s4a_1p8>; |
| }; |
| }; |
| }; |
| |
| &slpi_pil { |
| status = "okay"; |
| |
| px-supply = <&vreg_lvs2a_1p8>; |
| }; |
| |
| &usb3 { |
| status = "okay"; |
| extcon = <&typec>; |
| |
| qcom,select-utmi-as-pipe-clk; |
| }; |
| |
| &usb3_dwc3 { |
| extcon = <&typec>; |
| |
| /* usb3-phy is not used on this device */ |
| phys = <&hsusb_phy1>; |
| phy-names = "usb2-phy"; |
| |
| maximum-speed = "high-speed"; |
| snps,is-utmi-l1-suspend; |
| snps,usb2-gadget-lpm-disable; |
| snps,hird-threshold = /bits/ 8 <0>; |
| }; |
| |
| &hsusb_phy1 { |
| status = "okay"; |
| |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; |
| }; |
| |
| &ufshc { |
| status = "okay"; |
| |
| vcc-supply = <&vreg_l20a_2p95>; |
| vccq-supply = <&vreg_l25a_1p2>; |
| vccq2-supply = <&vreg_s4a_1p8>; |
| vdd-hba-supply = <&vreg_l25a_1p2>; |
| |
| vcc-max-microamp = <600000>; |
| vccq-max-microamp = <450000>; |
| vccq2-max-microamp = <450000>; |
| }; |
| |
| &ufsphy { |
| status = "okay"; |
| |
| vdda-phy-supply = <&vreg_l28a_0p925>; |
| vdda-pll-supply = <&vreg_l12a_1p8>; |
| }; |
| |
| &venus { |
| status = "okay"; |
| }; |
| |
| &rpm_requests { |
| regulators-0 { |
| compatible = "qcom,rpm-pm8994-regulators"; |
| |
| vdd_s1-supply = <&vph_pwr>; |
| vdd_s2-supply = <&vph_pwr>; |
| vdd_s3-supply = <&vph_pwr>; |
| vdd_s4-supply = <&vph_pwr>; |
| vdd_s5-supply = <&vph_pwr>; |
| vdd_s6-supply = <&vph_pwr>; |
| vdd_s7-supply = <&vph_pwr>; |
| vdd_s8-supply = <&vph_pwr>; |
| vdd_s9-supply = <&vph_pwr>; |
| vdd_s10-supply = <&vph_pwr>; |
| vdd_s11-supply = <&vph_pwr>; |
| vdd_s12-supply = <&vph_pwr>; |
| vdd_l1-supply = <&vreg_s1b_1p025>; |
| vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; |
| vdd_l3_l11-supply = <&vreg_s3a_1p3>; |
| vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; |
| vdd_l5_l7-supply = <&vreg_s5a_2p15>; |
| vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; |
| vdd_l8_l16_l30-supply = <&vph_pwr>; |
| vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; |
| vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; |
| vdd_l14_l15-supply = <&vreg_s5a_2p15>; |
| vdd_l17_l29-supply = <&vph_pwr_bbyp>; |
| vdd_l20_l21-supply = <&vph_pwr_bbyp>; |
| vdd_l25-supply = <&vreg_s3a_1p3>; |
| vdd_lvs1_2-supply = <&vreg_s4a_1p8>; |
| |
| vreg_s3a_1p3: s3 { |
| regulator-name = "vreg_s3a_1p3"; |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| |
| /* Required by QCA6174a - vdd-core */ |
| regulator-always-on; |
| }; |
| vreg_s4a_1p8: s4 { |
| regulator-name = "vreg_s4a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-allow-set-load; |
| |
| /* Required by QCA6174a - vddio */ |
| regulator-always-on; |
| }; |
| vreg_s5a_2p15: s5 { |
| regulator-name = "vreg_s5a_2p15"; |
| regulator-min-microvolt = <2150000>; |
| regulator-max-microvolt = <2150000>; |
| }; |
| vreg_s7a_0p8: s7 { |
| regulator-name = "vreg_s7a_0p8"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| }; |
| vreg_l1a_1p0: l1 { |
| regulator-name = "vreg_l1a_1p0"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| }; |
| vreg_l2a_1p25: l2 { |
| regulator-name = "vreg_l2a_1p25"; |
| regulator-min-microvolt = <1250000>; |
| regulator-max-microvolt = <1250000>; |
| }; |
| vreg_l4a_1p225: l4 { |
| regulator-name = "vreg_l4a_1p225"; |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| }; |
| vreg_l6a_1p8: l6 { |
| regulator-name = "vreg_l6a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l8a_1p8: l8 { |
| regulator-name = "vreg_l8a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l9a_1p8: l9 { |
| regulator-name = "vreg_l9a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l10a_1p8: l10 { |
| regulator-name = "vreg_l10a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l12a_1p8: l12 { |
| regulator-name = "vreg_l12a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-allow-set-load; |
| }; |
| vreg_l13a_2p95: l13 { |
| regulator-name = "vreg_l13a_2p95"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| }; |
| vreg_l14a_1p8: l14 { |
| regulator-name = "vreg_l14a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l15a_1p8: l15 { |
| regulator-name = "vreg_l15a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_l16a_2p7: l16 { |
| regulator-name = "vreg_l16a_2p7"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| }; |
| vreg_l19a_3p3: l19 { |
| regulator-name = "vreg_l19a_3p3"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| vreg_l20a_2p95: l20 { |
| regulator-name = "vreg_l20a_2p95"; |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-allow-set-load; |
| }; |
| vreg_l21a_2p95: l21 { |
| regulator-name = "vreg_l21a_2p95"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| vreg_l23a_2p8: l23 { |
| regulator-name = "vreg_l23a_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| vreg_l24a_3p075: l24 { |
| regulator-name = "vreg_l24a_3p075"; |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| }; |
| vreg_l25a_1p2: l25 { |
| regulator-name = "vreg_l25a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-allow-set-load; |
| }; |
| vreg_l27a_1p2: l27 { |
| regulator-name = "vreg_l27a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| vreg_l28a_0p925: l28 { |
| regulator-name = "vreg_l28a_0p925"; |
| regulator-min-microvolt = <925000>; |
| regulator-max-microvolt = <925000>; |
| regulator-allow-set-load; |
| }; |
| vreg_l30a_1p8: l30 { |
| regulator-name = "vreg_l30a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| /* Required by QCA6174a - vddio-xtal */ |
| regulator-always-on; |
| }; |
| vreg_l32a_1p8: l32 { |
| regulator-name = "vreg_l32a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_lvs1a_1p8: lvs1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| vreg_lvs2a_1p8: lvs2 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,rpm-pmi8994-regulators"; |
| |
| vdd_s1-supply = <&vph_pwr>; |
| vdd_s2-supply = <&vph_pwr>; |
| vdd_s3-supply = <&vph_pwr>; |
| vdd_bst_byp-supply = <&vph_pwr>; |
| |
| vreg_s1b_1p025: s1 { |
| regulator-name = "vreg_s1b_1p025"; |
| regulator-min-microvolt = <1025000>; |
| regulator-max-microvolt = <1025000>; |
| }; |
| |
| vph_pwr_bbyp: boost-bypass { |
| regulator-name = "vph_pwr_bbyp"; |
| regulator-min-microvolt = <3150000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| }; |
| }; |
| |
| &pm8994_spmi_regulators { |
| qcom,saw-reg = <&saw3>; |
| s8 { |
| qcom,saw-slave; |
| }; |
| s9 { |
| qcom,saw-slave; |
| }; |
| s10 { |
| qcom,saw-slave; |
| }; |
| vreg_apc_0p8: s11 { |
| qcom,saw-leader; |
| regulator-name = "vreg_apc_0p8"; |
| regulator-min-microvolt = <470000>; |
| regulator-max-microvolt = <1140000>; |
| regulator-max-step-microvolt = <150000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &pmi8994_spmi_regulators { |
| vdd_gfx: s2 { |
| regulator-name = "vdd_gfx"; |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1015000>; |
| regulator-enable-ramp-delay = <500>; |
| }; |
| }; |
| |
| &pm8994_gpios { |
| irled_default: irled-default-state { |
| pins = "gpio5"; |
| function = PMIC_GPIO_FUNC_FUNC1; |
| output-low; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; |
| power-source = <PM8994_GPIO_S4>; |
| bias-disable; |
| }; |
| |
| wlan_en_default: wlan-en-state { |
| pins = "gpio8"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| output-low; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| power-source = <PM8994_GPIO_S4>; |
| bias-disable; |
| }; |
| |
| rome_enable_default: rome-enable-state { |
| pins = "gpio9"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| output-high; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| power-source = <PM8994_GPIO_VPH>; |
| }; |
| |
| divclk1_default: divclk1-state { |
| pins = "gpio15"; |
| function = PMIC_GPIO_FUNC_FUNC1; |
| bias-disable; |
| power-source = <PM8994_GPIO_S4>; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| }; |
| |
| divclk4_pin_a: divclk4-state { |
| pins = "gpio18"; |
| function = PMIC_GPIO_FUNC_FUNC2; |
| bias-disable; |
| power-source = <PM8994_GPIO_S4>; |
| }; |
| }; |
| |
| &tlmm { |
| mdss_dsi_default: mdss-dsi-default-state { |
| pins = "gpio8"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| mdss_dsi_sleep: mdss-dsi-sleep-state { |
| pins = "gpio8"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| mdss_te_default: mdss-te-default-state { |
| pins = "gpio10"; |
| function = "mdp_vsync"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| mdss_te_sleep: mdss-te-sleep-state { |
| pins = "gpio10"; |
| function = "mdp_vsync"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| nfc_default: nfc-default-state { |
| pins = "gpio12", "gpio21"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-pull-up; |
| }; |
| }; |
