| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| */ |
| |
| #include <dt-bindings/clock/qcom,qdu1000-gcc.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/dma/qcom-gpi.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interconnect/qcom,icc.h> |
| #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen: chosen { }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x0>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD0>; |
| power-domain-names = "psci"; |
| qcom,freq-domains = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| L3_0: l3-cache { |
| compatible = "cache"; |
| cache-level = <3>; |
| cache-unified; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x100>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD1>; |
| power-domain-names = "psci"; |
| qcom,freq-domains = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_100>; |
| L2_100: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x200>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD2>; |
| power-domain-names = "psci"; |
| qcom,freq-domains = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_200>; |
| L2_200: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a55"; |
| reg = <0x0 0x300>; |
| clocks = <&cpufreq_hw 0>; |
| enable-method = "psci"; |
| power-domains = <&CPU_PD3>; |
| power-domain-names = "psci"; |
| qcom,freq-domains = <&cpufreq_hw 0>; |
| next-level-cache = <&L2_300>; |
| L2_300: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| CPU_OFF: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| entry-latency-us = <274>; |
| exit-latency-us = <480>; |
| min-residency-us = <3934>; |
| arm,psci-suspend-param = <0x40000004>; |
| local-timer-stop; |
| }; |
| }; |
| |
| domain-idle-states { |
| CLUSTER_SLEEP_0: cluster-sleep-0 { |
| compatible = "domain-idle-state"; |
| entry-latency-us = <584>; |
| exit-latency-us = <2332>; |
| min-residency-us = <6118>; |
| arm,psci-suspend-param = <0x41000044>; |
| }; |
| |
| CLUSTER_SLEEP_1: cluster-sleep-1 { |
| compatible = "domain-idle-state"; |
| entry-latency-us = <2893>; |
| exit-latency-us = <4023>; |
| min-residency-us = <9987>; |
| arm,psci-suspend-param = <0x41003344>; |
| }; |
| }; |
| |
| firmware { |
| scm { |
| compatible = "qcom,scm-qdu1000", "qcom,scm"; |
| }; |
| }; |
| |
| mc_virt: interconnect-0 { |
| compatible = "qcom,qdu1000-mc-virt"; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| clk_virt: interconnect-1 { |
| compatible = "qcom,qdu1000-clk-virt"; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0x0 0x80000000 0x0 0x0>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a55-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| CPU_PD0: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF>; |
| }; |
| |
| CPU_PD1: power-domain-cpu1 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF>; |
| }; |
| |
| CPU_PD2: power-domain-cpu2 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF>; |
| }; |
| |
| CPU_PD3: power-domain-cpu3 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_OFF>; |
| }; |
| |
| CLUSTER_PD: power-domain-cluster { |
| #power-domain-cells = <0>; |
| domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>; |
| }; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| hyp_mem: hyp@80000000 { |
| reg = <0x0 0x80000000 0x0 0x600000>; |
| no-map; |
| }; |
| |
| xbl_dt_log_mem: xbl-dt-log@80600000 { |
| reg = <0x0 0x80600000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| xbl_ramdump_mem: xbl-ramdump@80640000 { |
| reg = <0x0 0x80640000 0x0 0x1c0000>; |
| no-map; |
| }; |
| |
| aop_image_mem: aop-image@80800000 { |
| reg = <0x0 0x80800000 0x0 0x60000>; |
| no-map; |
| }; |
| |
| aop_cmd_db_mem: aop-cmd-db@80860000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0x0 0x80860000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| aop_config_mem: aop-config@80880000 { |
| reg = <0x0 0x80880000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| tme_crash_dump_mem: tme-crash-dump@808a0000 { |
| reg = <0x0 0x808a0000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| tme_log_mem: tme-log@808e0000 { |
| reg = <0x0 0x808e0000 0x0 0x4000>; |
| no-map; |
| }; |
| |
| uefi_log_mem: uefi-log@808e4000 { |
| reg = <0x0 0x808e4000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| smem_mem: smem@80900000 { |
| compatible = "qcom,smem"; |
| reg = <0x0 0x80900000 0x0 0x200000>; |
| no-map; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| cpucp_fw_mem: cpucp-fw@80b00000 { |
| reg = <0x0 0x80b00000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| xbl_sc_mem: memory@80c00000 { |
| reg = <0x0 0x80c00000 0x0 0x40000>; |
| no-map; |
| }; |
| |
| tz_stat_mem: tz-stat@81d00000 { |
| reg = <0x0 0x81d00000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| tags_mem: tags@81e00000 { |
| reg = <0x0 0x81e00000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| qtee_mem: qtee@82300000 { |
| reg = <0x0 0x82300000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| ta_mem: ta@82800000 { |
| reg = <0x0 0x82800000 0x0 0xa00000>; |
| no-map; |
| }; |
| |
| fs1_mem: fs1@83200000 { |
| reg = <0x0 0x83200000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| fs2_mem: fs2@83600000 { |
| reg = <0x0 0x83600000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| fs3_mem: fs3@83a00000 { |
| reg = <0x0 0x83a00000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| /* Linux kernel image is loaded at 0x83e00000 */ |
| |
| ipa_fw_mem: ipa-fw@8be00000 { |
| reg = <0x0 0x8be00000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| ipa_gsi_mem: ipa-gsi@8be10000 { |
| reg = <0x0 0x8be10000 0x0 0x14000>; |
| no-map; |
| }; |
| |
| mpss_mem: mpss@8c000000 { |
| reg = <0x0 0x8c000000 0x0 0x12c00000>; |
| no-map; |
| }; |
| |
| q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 { |
| reg = <0x0 0x9ec00000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| tenx_mem: tenx@a0000000 { |
| reg = <0x0 0xa0000000 0x0 0x19600000>; |
| no-map; |
| }; |
| |
| oem_tenx_mem: oem-tenx@b9600000 { |
| reg = <0x0 0xb9600000 0x0 0x6a00000>; |
| no-map; |
| }; |
| |
| tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 { |
| reg = <0x0 0xc0000000 0x0 0x3200000>; |
| no-map; |
| }; |
| |
| ipa_buffer_mem: ipa-buffer@c3200000 { |
| reg = <0x0 0xc3200000 0x0 0x12c00000>; |
| no-map; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0 0 0 0 0x10 0>; |
| dma-ranges = <0 0 0 0 0x10 0>; |
| |
| gcc: clock-controller@80000 { |
| compatible = "qcom,qdu1000-gcc"; |
| reg = <0x0 0x80000 0x0 0x1f4200>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&sleep_clk>, |
| <0>, |
| <0>, |
| <0>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| ecpricc: clock-controller@280000 { |
| compatible = "qcom,qdu1000-ecpricc"; |
| reg = <0x0 0x00280000 0x0 0x31c00>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>, |
| <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>, |
| <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>, |
| <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>, |
| <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>, |
| <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| gpi_dma0: dma-controller@900000 { |
| compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0x0 0x900000 0x0 0x60000>; |
| interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <12>; |
| dma-channel-mask = <0x3f>; |
| iommus = <&apps_smmu 0xf6 0x0>; |
| #dma-cells = <3>; |
| }; |
| |
| qupv3_id_0: geniqup@9c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x9c0000 0x0 0x2000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| iommus = <&apps_smmu 0xe3 0x0>; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 0 |
| &clk_virt SLAVE_QUP_CORE_0 0>; |
| interconnect-names = "qup-core"; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| uart0: serial@980000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x980000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_uart0_default>; |
| pinctrl-names = "default"; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@984000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x984000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c1_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@984000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x984000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@988000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x988000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c2_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@988000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x988000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@98c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x98c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c3_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@98c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x98c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@990000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x990000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c4_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@990000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x990000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@994000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x994000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c5_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@994000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x994000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@998000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x998000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c6_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@998000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x998000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@99c000 { |
| compatible = "qcom,geni-debug-uart"; |
| reg = <0x0 0x99c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; |
| pinctrl-names = "default"; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gpi_dma1: dma-controller@a00000 { |
| compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0x0 0xa00000 0x0 0x60000>; |
| interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <12>; |
| dma-channel-mask = <0x3f>; |
| iommus = <&apps_smmu 0x116 0x0>; |
| #dma-cells = <3>; |
| }; |
| |
| qupv3_id_1: geniqup@ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0xac0000 0x0 0x2000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| iommus = <&apps_smmu 0x103 0x0>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| uart8: serial@a80000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0xa80000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_uart8_default>; |
| pinctrl-names = "default"; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa84000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c9_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi9: spi@a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa84000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c@a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa88000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c10_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi10: spi@a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa88000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c@a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa8c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c11_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi11: spi@a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa8c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c@a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa90000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c12_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi12: spi@a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa90000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c@a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa94000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c13_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart13: serial@a94000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0xa94000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_uart13_default>; |
| pinctrl-names = "default"; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi13: spi@a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa94000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c14: i2c@a98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa98000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c14_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi14: spi@a98000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa98000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| |
| i2c15: i2c@a9c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0xa9c000 0x0 0x4000>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-0 = <&qup_i2c15_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi15: spi@a9c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0xa9c000 0x0 0x4000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; |
| pinctrl-names = "default"; |
| status = "disabled"; |
| }; |
| }; |
| |
| system_noc: interconnect@1640000 { |
| compatible = "qcom,qdu1000-system-noc"; |
| reg = <0x0 0x1640000 0x0 0x45080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| tcsr_mutex: hwlock@1f40000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x0 0x1f40000 0x0 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| sdhc: mmc@8804000 { |
| compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x0 0x08804000 0x0 0x1000>, |
| <0x0 0x08805000 0x0 0x1000>; |
| reg-names = "hc", "cqhci"; |
| |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC5_AHB_CLK>, |
| <&gcc GCC_SDCC5_APPS_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "iface", |
| "core", |
| "xo"; |
| |
| resets = <&gcc GCC_SDCC5_BCR>; |
| |
| interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, |
| <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>; |
| interconnect-names = "sdhc-ddr", "cpu-sdhc"; |
| power-domains = <&rpmhpd QDU1000_CX>; |
| operating-points-v2 = <&sdhc1_opp_table>; |
| |
| iommus = <&apps_smmu 0x80 0x0>; |
| dma-coherent; |
| |
| bus-width = <8>; |
| |
| qcom,dll-config = <0x0007642c>; |
| qcom,ddr-config = <0x80040868>; |
| |
| status = "disabled"; |
| |
| sdhc1_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-384000000 { |
| opp-hz = /bits/ 64 <384000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <6528000 1652800>; |
| opp-avg-kBps = <400000 0>; |
| }; |
| }; |
| }; |
| |
| usb_1_hsphy: phy@88e3000 { |
| compatible = "qcom,qdu1000-usb-hs-phy", |
| "qcom,usb-snps-hs-7nm-phy"; |
| reg = <0x0 0x088e3000 0x0 0x120>; |
| #phy-cells = <0>; |
| |
| clocks =<&gcc GCC_USB2_CLKREF_EN>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_1_qmpphy: phy@88e5000 { |
| compatible = "qcom,qdu1000-qmp-usb3-uni-phy"; |
| reg = <0x0 0x088e5000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| <&gcc GCC_USB2_CLKREF_EN>, |
| <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "aux", |
| "ref", |
| "com_aux", |
| "pipe"; |
| |
| resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, |
| <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; |
| reset-names = "phy", |
| "phy_phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb3_uni_phy_pipe_clk_src"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_1: usb@a6f8800 { |
| compatible = "qcom,qdu1000-dwc3", "qcom,dwc3"; |
| reg = <0 0x0a6f8800 0 0x400>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "sleep", |
| "mock_utmi"; |
| |
| assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 8 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 9 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "pwr_event", |
| "hs_phy_irq", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| power-domains = <&gcc USB30_PRIM_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| resets = <&gcc GCC_USB30_PRIM_BCR>; |
| |
| interconnects = <&system_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &system_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>; |
| |
| interconnect-names = "usb-ddr", |
| "apps-usb"; |
| |
| status = "disabled"; |
| |
| usb_1_dwc3: usb@a600000 { |
| compatible = "snps,dwc3"; |
| reg = <0 0x0a600000 0 0xcd00>; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| |
| iommus = <&apps_smmu 0xc0 0x0>; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| phys = <&usb_1_hsphy>, |
| <&usb_1_qmpphy>; |
| phy-names = "usb2-phy", |
| "usb3-phy"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_1_dwc3_hs: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_1_dwc3_ss: endpoint { |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| pdc: interrupt-controller@b220000 { |
| compatible = "qcom,qdu1000-pdc", "qcom,pdc"; |
| reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; |
| qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, |
| <94 609 31>, <125 63 1>; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&intc>; |
| interrupt-controller; |
| }; |
| |
| spmi_bus: spmi@c400000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0 0xc400000 0x0 0x3000>, |
| <0x0 0xc500000 0x0 0x400000>, |
| <0x0 0xc440000 0x0 0x80000>, |
| <0x0 0xc4c0000 0x0 0x10000>, |
| <0x0 0xc42d000 0x0 0x4000>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| tlmm: pinctrl@f000000 { |
| compatible = "qcom,qdu1000-tlmm"; |
| reg = <0x0 0xf000000 0x0 0x1000000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&tlmm 0 0 151>; |
| wakeup-parent = <&pdc>; |
| |
| qup_uart0_default: qup-uart0-default-state { |
| pins = "gpio6", "gpio7", "gpio8", "gpio9"; |
| function = "qup00"; |
| }; |
| |
| qup_i2c1_data_clk: qup-i2c1-data-clk-state { |
| pins = "gpio10", "gpio11"; |
| function = "qup01"; |
| }; |
| |
| qup_spi1_data_clk: qup-spi1-data-clk-state { |
| pins = "gpio10", "gpio11", "gpio12"; |
| function = "qup01"; |
| }; |
| |
| qup_spi1_cs: qup-spi1-cs-state { |
| pins = "gpio13"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c2_data_clk: qup-i2c2-data-clk-state { |
| pins = "gpio12", "gpio13"; |
| function = "qup02"; |
| }; |
| |
| qup_spi2_data_clk: qup-spi2-data-clk-state { |
| pins = "gpio12", "gpio13", "gpio10"; |
| function = "qup02"; |
| }; |
| |
| qup_spi2_cs: qup-spi2-cs-state { |
| pins = "gpio11"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c3_data_clk: qup-i2c3-data-clk-state { |
| pins = "gpio14", "gpio15"; |
| function = "qup03"; |
| }; |
| |
| qup_spi3_data_clk: qup-spi3-data-clk-state { |
| pins = "gpio14", "gpio15", "gpio16"; |
| function = "qup03"; |
| }; |
| |
| qup_spi3_cs: qup-spi3-cs-state { |
| pins = "gpio17"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c4_data_clk: qup-i2c4-data-clk-state { |
| pins = "gpio16", "gpio17"; |
| function = "qup04"; |
| }; |
| |
| qup_spi4_data_clk: qup-spi4-data-clk-state { |
| pins = "gpio16", "gpio17", "gpio14"; |
| function = "qup04"; |
| }; |
| |
| qup_spi4_cs: qup-spi4-cs-state { |
| pins = "gpio15"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c5_data_clk: qup-i2c5-data-clk-state { |
| pins = "gpio130", "gpio131"; |
| function = "qup05"; |
| }; |
| |
| qup_spi5_data_clk: qup-spi5-data-clk-state { |
| pins = "gpio130", "gpio131", "gpio132"; |
| function = "qup05"; |
| }; |
| |
| qup_spi5_cs: qup-spi5-cs-state { |
| pins = "gpio133"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c6_data_clk: qup-i2c6-data-clk-state { |
| pins = "gpio132", "gpio133"; |
| function = "qup06"; |
| }; |
| |
| qup_spi6_data_clk: qup-spi6-data-clk-state { |
| pins = "gpio132", "gpio133", "gpio130"; |
| function = "qup06"; |
| }; |
| |
| qup_spi6_cs: qup-spi6-cs-state { |
| pins = "gpio131"; |
| function = "gpio"; |
| }; |
| |
| qup_uart7_rx: qup-uart7-rx-state { |
| pins = "gpio135"; |
| function = "qup07"; |
| }; |
| |
| qup_uart7_tx: qup-uart7-tx-state { |
| pins = "gpio134"; |
| function = "qup07"; |
| }; |
| |
| qup_uart8_default: qup-uart8-default-state { |
| pins = "gpio18", "gpio19", "gpio20", "gpio21"; |
| function = "qup10"; |
| }; |
| |
| qup_i2c9_data_clk: qup-i2c9-data-clk-state { |
| pins = "gpio22", "gpio23"; |
| function = "qup11"; |
| }; |
| |
| qup_spi9_data_clk: qup-spi9-data-clk-state { |
| pins = "gpio22", "gpio23", "gpio24"; |
| function = "qup11"; |
| }; |
| |
| qup_spi9_cs: qup-spi9-cs-state { |
| pins = "gpio25"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c10_data_clk: qup-i2c10-data-clk-state { |
| pins = "gpio24", "gpio25"; |
| function = "qup12"; |
| }; |
| |
| qup_spi10_data_clk: qup-spi10-data-clk-state { |
| pins = "gpio24", "gpio25", "gpio22"; |
| function = "qup12"; |
| }; |
| |
| qup_spi10_cs: qup-spi10-cs-state { |
| pins = "gpio23"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c11_data_clk: qup-i2c11-data-clk-state { |
| pins = "gpio26", "gpio27"; |
| function = "qup13"; |
| }; |
| |
| qup_spi11_data_clk: qup-spi11-data-clk-state { |
| pins = "gpio26", "gpio27", "gpio28"; |
| function = "qup13"; |
| }; |
| |
| qup_spi11_cs: qup-spi11-cs-state { |
| pins = "gpio29"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c12_data_clk: qup-i2c12-data-clk-state { |
| pins = "gpio28", "gpio29"; |
| function = "qup14"; |
| }; |
| |
| qup_spi12_data_clk: qup-spi12-data-clk-state { |
| pins = "gpio28", "gpio29", "gpio26"; |
| function = "qup14"; |
| }; |
| |
| qup_spi12_cs: qup-spi12-cs-state { |
| pins = "gpio27"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c13_data_clk: qup-i2c13-data-clk-state { |
| pins = "gpio30", "gpio31"; |
| function = "qup15"; |
| }; |
| |
| qup_spi13_data_clk: qup-spi13-data-clk-state { |
| pins = "gpio30", "gpio31", "gpio32"; |
| function = "qup15"; |
| }; |
| |
| qup_spi13_cs: qup-spi13-cs-state { |
| pins = "gpio33"; |
| function = "gpio"; |
| }; |
| |
| qup_uart13_default: qup-uart13-default-state { |
| pins = "gpio30", "gpio31", "gpio32", "gpio33"; |
| function = "qup15"; |
| }; |
| |
| qup_i2c14_data_clk: qup-i2c14-data-clk-state { |
| pins = "gpio34", "gpio35"; |
| function = "qup16"; |
| }; |
| |
| qup_spi14_data_clk: qup-spi14-data-clk-state { |
| pins = "gpio34", "gpio35", "gpio36"; |
| function = "qup16"; |
| }; |
| |
| qup_spi14_cs: qup-spi14-cs-state { |
| pins = "gpio37", "gpio38"; |
| function = "gpio"; |
| }; |
| |
| qup_i2c15_data_clk: qup-i2c15-data-clk-state { |
| pins = "gpio40", "gpio41"; |
| function = "qup17"; |
| }; |
| |
| qup_spi15_data_clk: qup-spi15-data-clk-state { |
| pins = "gpio40", "gpio41", "gpio30"; |
| function = "qup17"; |
| }; |
| |
| qup_spi15_cs: qup-spi15-cs-state { |
| pins = "gpio31"; |
| function = "gpio"; |
| }; |
| |
| sdc_on_state: sdc-on-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| rclk-pins { |
| pins = "sdc1_rclk"; |
| bias-pull-down; |
| }; |
| }; |
| |
| sdc_off_state: sdc-off-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| rclk-pins { |
| pins = "sdc1_rclk"; |
| bias-pull-down; |
| }; |
| }; |
| }; |
| |
| sram@14680000 { |
| compatible = "qcom,qdu1000-imem", "syscon", "simple-mfd"; |
| reg = <0 0x14680000 0 0x1000>; |
| ranges = <0 0 0x14680000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pil-reloc@94c { |
| compatible = "qcom,pil-reloc-info"; |
| reg = <0x94c 0xc8>; |
| }; |
| }; |
| |
| apps_smmu: iommu@15000000 { |
| compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x15000000 0x0 0x100000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <2>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| intc: interrupt-controller@17200000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */ |
| <0x0 0x17260000 0x0 0x80000>; /* GICR * 4 */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| #redistributor-regions = <1>; |
| redistributor-stride = <0x0 0x20000>; |
| }; |
| |
| timer@17420000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x17420000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x0 0x20000000>; |
| |
| frame@17421000 { |
| reg = <0x17421000 0x1000>, |
| <0x17422000 0x1000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <0>; |
| }; |
| |
| frame@17423000 { |
| reg = <0x17423000 0x1000>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <1>; |
| status = "disabled"; |
| }; |
| |
| frame@17425000 { |
| reg = <0x17425000 0x1000>, |
| <0x17426000 0x1000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <2>; |
| status = "disabled"; |
| }; |
| |
| frame@17427000 { |
| reg = <0x17427000 0x1000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <3>; |
| status = "disabled"; |
| }; |
| |
| frame@17429000 { |
| reg = <0x17429000 0x1000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <4>; |
| status = "disabled"; |
| }; |
| |
| frame@1742b000 { |
| reg = <0x1742b000 0x1000>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <5>; |
| status = "disabled"; |
| }; |
| |
| frame@1742d000 { |
| reg = <0x1742d000 0x1000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <6>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apps_rsc: rsc@17a00000 { |
| compatible = "qcom,rpmh-rsc"; |
| reg = <0x0 0x17a00000 0x0 0x10000>, |
| <0x0 0x17a10000 0x0 0x10000>, |
| <0x0 0x17a20000 0x0 0x10000>; |
| reg-names = "drv-0", "drv-1", "drv-2"; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, |
| <WAKE_TCS 3>, <CONTROL_TCS 0>; |
| label = "apps_rsc"; |
| power-domains = <&CLUSTER_PD>; |
| |
| apps_bcm_voter: bcm-voter { |
| compatible = "qcom,bcm-voter"; |
| }; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,qdu1000-rpmh-clk"; |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| #clock-cells = <1>; |
| }; |
| |
| rpmhpd: power-controller { |
| compatible = "qcom,qdu1000-rpmhpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmhpd_opp_table>; |
| |
| rpmhpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmhpd_opp_ret: opp1 { |
| opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| rpmhpd_opp_min_svs: opp2 { |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs: opp3 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmhpd_opp_svs: opp4 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| rpmhpd_opp_svs_l1: opp5 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_nom: opp6 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| rpmhpd_opp_nom_l1: opp7 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| |
| rpmhpd_opp_nom_l2: opp8 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| }; |
| |
| rpmhpd_opp_turbo: opp9 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| }; |
| |
| rpmhpd_opp_turbo_l1: opp10 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpufreq_hw: cpufreq@17d90000 { |
| compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss"; |
| reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>; |
| reg-names = "freq-domain0", "freq-domain1"; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; |
| clock-names = "xo", "alternate"; |
| #freq-domain-cells = <1>; |
| #clock-cells = <1>; |
| }; |
| |
| gem_noc: interconnect@19100000 { |
| compatible = "qcom,qdu1000-gem-noc"; |
| reg = <0x0 0x19100000 0x0 0xB8080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| system-cache-controller@19200000 { |
| compatible = "qcom,qdu1000-llcc"; |
| reg = <0 0x19200000 0 0x80000>, |
| <0 0x19300000 0 0x80000>, |
| <0 0x19600000 0 0x80000>, |
| <0 0x19700000 0 0x80000>, |
| <0 0x19a00000 0 0x80000>, |
| <0 0x19b00000 0 0x80000>, |
| <0 0x19e00000 0 0x80000>, |
| <0 0x19f00000 0 0x80000>, |
| <0 0x1a200000 0 0x80000>; |
| reg-names = "llcc0_base", |
| "llcc1_base", |
| "llcc2_base", |
| "llcc3_base", |
| "llcc4_base", |
| "llcc5_base", |
| "llcc6_base", |
| "llcc7_base", |
| "llcc_broadcast_base"; |
| interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; |
| |
| nvmem-cells = <&multi_chan_ddr>; |
| nvmem-cell-names = "multi-chan-ddr"; |
| }; |
| |
| sec_qfprom: efuse@221c8000 { |
| compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom"; |
| reg = <0 0x221c8000 0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| multi_chan_ddr: multi-chan-ddr@12b { |
| reg = <0x12b 0x1>; |
| bits = <0 2>; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |
