| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> |
| */ |
| |
| /dts-v1/; |
| |
| #include "sm8250-sony-xperia-edo.dtsi" |
| |
| / { |
| model = "Sony Xperia 1 II"; |
| compatible = "sony,pdx203-generic", "qcom,sm8250"; |
| chassis-type = "handset"; |
| }; |
| |
| /delete-node/ &vreg_l7f_1p8; |
| |
| &i2c5 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| pmic@75 { |
| compatible = "dlg,slg51000"; |
| reg = <0x75>; |
| dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; |
| vin5-supply = <&vreg_s1f_1p2>; |
| vin6-supply = <&vreg_s1f_1p2>; |
| |
| pinctrl-0 = <&cam_pwr_b_cs>; |
| pinctrl-names = "default"; |
| |
| regulators { |
| slg51000_1_ldo1: ldo1 { |
| regulator-name = "slg51000_b_ldo1"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_1_ldo2: ldo2 { |
| regulator-name = "slg51000_b_ldo2"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_1_ldo3: ldo3 { |
| regulator-name = "slg51000_b_ldo3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_1_ldo4: ldo4 { |
| regulator-name = "slg51000_b_ldo4"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_1_ldo5: ldo5 { |
| regulator-name = "slg51000_b_ldo5"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_1_ldo6: ldo6 { |
| regulator-name = "slg51000_b_ldo6"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_1_ldo7: ldo7 { |
| regulator-name = "slg51000_b_ldo7"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c15 { |
| pmic@75 { |
| compatible = "dlg,slg51000"; |
| reg = <0x75>; |
| dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>; |
| vin5-supply = <&vreg_l2f_1p3>; |
| vin6-supply = <&vreg_l2f_1p3>; |
| |
| pinctrl-0 = <&cam_pwr_a_cs>; |
| pinctrl-names = "default"; |
| |
| regulators { |
| slg51000_0_ldo1: ldo1 { |
| regulator-name = "slg51000_a_ldo1"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_0_ldo2: ldo2 { |
| regulator-name = "slg51000_a_ldo2"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_0_ldo3: ldo3 { |
| regulator-name = "slg51000_a_ldo3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_0_ldo4: ldo4 { |
| regulator-name = "slg51000_a_ldo4"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_0_ldo5: ldo5 { |
| regulator-name = "slg51000_a_ldo5"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_0_ldo6: ldo6 { |
| regulator-name = "slg51000_a_ldo6"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_0_ldo7: ldo7 { |
| regulator-name = "slg51000_a_ldo7"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm8009_gpios { |
| gpio-line-names = "NC", /* GPIO_1 */ |
| "CAM_PWR_LD_EN", |
| "WIDEC_PWR_EN", |
| "NC"; |
| }; |
| |
| &pm8150_gpios { |
| gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ |
| "OPTION_2", |
| "NC", |
| "PM_SLP_CLK_IN", |
| "OPTION_1", |
| "NC", |
| "NC", |
| "SP_ARI_PWR_ALARM", |
| "NC", |
| "NC"; /* GPIO_10 */ |
| }; |
| |
| &pm8150b_gpios { |
| gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ |
| "FOCUS_N", |
| "NC", |
| "NC", |
| "RF_LCD_ID_EN", |
| "NC", |
| "NC", |
| "LCD_ID", |
| "NC", |
| "WLC_EN_N", /* GPIO_10 */ |
| "NC", |
| "RF_ID"; |
| }; |
| |
| &pm8150l_gpios { |
| gpio-line-names = "NC", /* GPIO_1 */ |
| "PM3003A_EN", |
| "NC", |
| "NC", |
| "NC", |
| "AUX2_THERM", |
| "BB_HP_EN", |
| "FP_LDO_EN", |
| "PMX_RESET_N", |
| "AUX3_THERM", /* GPIO_10 */ |
| "DTV_PWR_EN", |
| "PM3003A_MODE"; |
| }; |
| |
| &tlmm { |
| gpio-line-names = "AP_CTI_IN", /* GPIO_0 */ |
| "MDM2AP_ERR_FATAL", |
| "AP_CTI_OUT", |
| "MDM2AP_STATUS", |
| "NFC_I2C_SDA", |
| "NFC_I2C_SCL", |
| "NFC_EN", |
| "NFC_CLK_REQ", |
| "NFC_ESE_PWR_REQ", |
| "DVDT_WRT_DET_AND", |
| "SPK_AMP_RESET_N", /* GPIO_10 */ |
| "SPK_AMP_INT_N", |
| "APPS_I2C_1_SDA", |
| "APPS_I2C_1_SCL", |
| "NC", |
| "TX_GTR_THRES_IN", |
| "HST_BT_UART_CTS", |
| "HST_BT_UART_RFR", |
| "HST_BT_UART_TX", |
| "HST_BT_UART_RX", |
| "HST_WLAN_EN", /* GPIO_20 */ |
| "HST_BT_EN", |
| "RGBC_IR_PWR_EN", |
| "FP_INT_N", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NFC_ESE_SPI_MISO", |
| "NFC_ESE_SPI_MOSI", |
| "NFC_ESE_SPI_SCLK", /* GPIO_30 */ |
| "NFC_ESE_SPI_CS_N", |
| "WCD_RST_N", |
| "NC", |
| "SDM_DEBUG_UART_TX", |
| "SDM_DEBUG_UART_RX", |
| "TS_I2C_SDA", |
| "TS_I2C_SCL", |
| "TS_INT_N", |
| "FP_SPI_MISO", /* GPIO_40 */ |
| "FP_SPI_MOSI", |
| "FP_SPI_SCLK", |
| "FP_SPI_CS_N", |
| "APPS_I2C_0_SDA", |
| "APPS_I2C_0_SCL", |
| "DISP_ERR_FG", |
| "UIM2_DETECT_EN", |
| "NC", |
| "NC", |
| "NC", /* GPIO_50 */ |
| "NC", |
| "MDM_UART_CTS", |
| "MDM_UART_RFR", |
| "MDM_UART_TX", |
| "MDM_UART_RX", |
| "AP2MDM_STATUS", |
| "AP2MDM_ERR_FATAL", |
| "MDM_IPC_HS_UART_TX", |
| "MDM_IPC_HS_UART_RX", |
| "NC", /* GPIO_60 */ |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "USB_CC_DIR", |
| "DISP_VSYNC", |
| "NC", |
| "NC", |
| "CAM_PWR_B_CS", |
| "NC", /* GPIO_70 */ |
| "CAM_PWR_A_CS", |
| "SBU_SW_SEL", |
| "SBU_SW_OE", |
| "FP_RESET_N", |
| "FP_RESET_N", |
| "DISP_RESET_N", |
| "DEBUG_GPIO0", |
| "TRAY_DET", |
| "CAM2_RST_N", |
| "PCIE0_RST_N", |
| "PCIE0_CLK_REQ_N", /* GPIO_80 */ |
| "PCIE0_WAKE_N", |
| "DVDT_ENABLE", |
| "DVDT_WRT_DET_OR", |
| "NC", |
| "PCIE2_RST_N", |
| "PCIE2_CLK_REQ_N", |
| "PCIE2_WAKE_N", |
| "MDM_VFR_IRQ0", |
| "MDM_VFR_IRQ1", |
| "SW_SERVICE", /* GPIO_90 */ |
| "CAM_SOF", |
| "CAM1_RST_N", |
| "CAM0_RST_N", |
| "CAM0_MCLK", |
| "CAM1_MCLK", |
| "CAM2_MCLK", |
| "CAM3_MCLK", |
| "CAM4_MCLK", |
| "TOF_RST_N", |
| "NC", /* GPIO_100 */ |
| "CCI0_I2C_SDA", |
| "CCI0_I2C_SCL", |
| "CCI1_I2C_SDA", |
| "CCI1_I2C_SCL_", |
| "CCI2_I2C_SDA", |
| "CCI2_I2C_SCL", |
| "CCI3_I2C_SDA", |
| "CCI3_I2C_SCL", |
| "CAM3_RST_N", |
| "NFC_DWL_REQ", /* GPIO_110 */ |
| "NFC_IRQ", |
| "XVS", |
| "NC", |
| "RF_ID_EXTENSION", |
| "SPK_AMP_I2C_SDA", |
| "SPK_AMP_I2C_SCL", |
| "NC", |
| "NC", |
| "WLC_I2C_SDA", |
| "WLC_I2C_SCL", /* GPIO_120 */ |
| "ACC_COVER_OPEN", |
| "ALS_PROX_INT_N", |
| "ACCEL_INT", |
| "WLAN_SW_CTRL", |
| "CAMSENSOR_I2C_SDA", |
| "CAMSENSOR_I2C_SCL", |
| "UDON_SWITCH_SEL", |
| "WDOG_DISABLE", |
| "BAROMETER_INT", |
| "NC", /* GPIO_130 */ |
| "NC", |
| "FORCED_USB_BOOT", |
| "NC", |
| "NC", |
| "WLC_INT_N", |
| "NC", |
| "NC", |
| "RGBC_IR_INT", |
| "NC", |
| "NC", /* GPIO_140 */ |
| "NC", |
| "BT_SLIMBUS_CLK", |
| "BT_SLIMBUS_DATA", |
| "HW_ID_0", |
| "HW_ID_1", |
| "WCD_SWR_TX_CLK", |
| "WCD_SWR_TX_DATA0", |
| "WCD_SWR_TX_DATA1", |
| "WCD_SWR_RX_CLK", |
| "WCD_SWR_RX_DATA0", /* GPIO_150 */ |
| "WCD_SWR_RX_DATA1", |
| "SDM_DMIC_CLK1", |
| "SDM_DMIC_DATA1", |
| "SDM_DMIC_CLK2", |
| "SDM_DMIC_DATA2", |
| "SPK_AMP_I2S_CLK", |
| "SPK_AMP_I2S_WS", |
| "SPK_AMP_I2S_ASP_DIN", |
| "SPK_AMP_I2S_ASP_DOUT", |
| "COMPASS_I2C_SDA", /* GPIO_160 */ |
| "COMPASS_I2C_SCL", |
| "NC", |
| "NC", |
| "SSC_SPI_1_MISO", |
| "SSC_SPI_1_MOSI", |
| "SSC_SPI_1_CLK", |
| "SSC_SPI_1_CS_N", |
| "NC", |
| "NC", |
| "SSC_SENSOR_I2C_SDA", /* GPIO_170 */ |
| "SSC_SENSOR_I2C_SCL", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "HST_BLE_SNS_UART6_TX", |
| "HST_BLE_SNS_UART6_RX", |
| "HST_WLAN_UART_TX", |
| "HST_WLAN_UART_RX"; |
| |
| cam_pwr_b_cs: cam-pwr-b-state { |
| pins = "gpio69"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| output-low; |
| }; |
| |
| cam_pwr_a_cs: cam-pwr-a-state { |
| pins = "gpio71"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| output-low; |
| }; |
| }; |
