| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> |
| */ |
| |
| /dts-v1/; |
| |
| #include "sm8350-sony-xperia-sagami.dtsi" |
| |
| / { |
| model = "Sony Xperia 1 III"; |
| compatible = "sony,pdx215-generic", "qcom,sm8350"; |
| }; |
| |
| &i2c13 { |
| pmic@75 { |
| compatible = "dlg,slg51000"; |
| reg = <0x75>; |
| dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cam_pwr_a_cs>; |
| |
| regulators { |
| slg51000_a_ldo1: ldo1 { |
| regulator-name = "slg51000_a_ldo1"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_a_ldo2: ldo2 { |
| regulator-name = "slg51000_a_ldo2"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_a_ldo3: ldo3 { |
| regulator-name = "slg51000_a_ldo3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_a_ldo4: ldo4 { |
| regulator-name = "slg51000_a_ldo4"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_a_ldo5: ldo5 { |
| regulator-name = "slg51000_a_ldo5"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_a_ldo6: ldo6 { |
| regulator-name = "slg51000_a_ldo6"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_a_ldo7: ldo7 { |
| regulator-name = "slg51000_a_ldo7"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm8350b_gpios { |
| gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ |
| "NC", |
| "NC", |
| "NC", |
| "SNAPSHOT_N", |
| "CAM_PWR_LD_EN", |
| "NC", |
| "FOCUS_N"; |
| |
| cam_pwr_a_cs: cam-pwr-a-cs-state { |
| pins = "gpio1"; |
| function = "normal"; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| power-source = <1>; |
| drive-push-pull; |
| output-high; |
| }; |
| }; |
| |
| &pm8350c_gpios { |
| gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */ |
| "FL_STROBE_TRIG_TELE", |
| "NC", |
| "WLC_TXPWR_EN", |
| "NC", |
| "RGBC_IR_PWR_EN", |
| "NC", |
| "NC", |
| "WIDEC_PWR_EN"; |
| }; |
| |
| &tlmm { |
| gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */ |
| "APPS_I2C_0_SCL", |
| "UWIDEC_PWR_EN", |
| "HAP_RST_N", |
| "WLC_I2C_SDA", |
| "WLC_I2C_SCL", |
| "PM8008_1_RESET_N", |
| "WLC_INT_N", |
| "OIS_TELE_I2C_SDA", |
| "OIS_TELE_I2C_SCL", |
| "PM8350_OPTION", /* GPIO_10 */ |
| "NC", |
| "APPS_I2C_1_SDA", |
| "APPS_I2C_1_SCL", |
| "NC", |
| "NC", |
| "CAM1_RESET_N", |
| "LEO_CAM0_RESET_N", |
| "DEBUG_UART_TX", |
| "DEBUG_UART_RX", |
| "TS_I2C_SDA", /* GPIO_20 */ |
| "TS_I2C_SCL", |
| "TS_RESET_N", |
| "TS_INT_N", |
| "DISP_RESET_N", |
| "SW_SERVICE", |
| "DISP_ERR_FG", |
| "TX_GTR_THRES_IN", |
| "NC", |
| "NC", |
| "NC", /* GPIO_30 */ |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "SPK_AMP_INT_N", |
| "SPK_AMP_RESET_N", |
| "FP_INT_N", |
| "FP_RESET_N", |
| "NC", /* GPIO_40 */ |
| "NC", |
| "DEBUG_GPIO0", |
| "FORCE_USB_BOOT", |
| "FP_SPI_MISO", |
| "FP_SPI_MOSI", |
| "FP_SPI_CLK", |
| "FP_SPI_CS_N", |
| "SPK_AMP_I2C_SDA", |
| "SPK_AMP_I2C_SCL", |
| "NC", /* GPIO_50 */ |
| "HAP_INT_N", |
| "CAMSENSOR_I2C_SDA", |
| "CAMSENSOR_I2C_SCL", |
| "SBU_SW_OE", |
| "SBU_SW_SEL", |
| "NFC_ESE_SPI_MISO", |
| "NFC_ESE_SPI_MOSI", |
| "NFC_ESE_SPI_CLK", |
| "NFC_ESE_SPI_CS", |
| "NFC_I2C_SDA", /* GPIO_60 */ |
| "NFC_I2C_SCL", |
| "NFC_EN", |
| "NFC_CLK_REQ", |
| "HST_WLAN_EN", |
| "HST_BT_EN", |
| "HW_ID_0", |
| "HW_ID_1", |
| "HST_BT_UART_CTS", |
| "HST_BT_UART_RFR", |
| "HST_BT_UART_TX", /* GPIO_70 */ |
| "HST_BT_UART_RX", |
| "HAP_I2C_SDA", |
| "HAP_I2C_SCL", |
| "RF_LCD_ID_EN", |
| "RF_ID_EXTENSION", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "HALL_INT_N", /* GPIO_80 */ |
| "USB_CC_DIR", |
| "DISP_VSYNC", |
| "NC", |
| "NC", |
| "CAM_SOF_TELE", |
| "NFC_DWL_REQ", |
| "NFC_IRQ", |
| "WCD_RST_N", |
| "ALS_PROX_INT_N", |
| "NC", /* GPIO_90 */ |
| "NC", |
| "TRAY_DET", |
| "UDON_SWITCH_SEL", |
| "PCIE0_RESET_N", |
| "PCIE0_CLK_REQ_N", |
| "PCIE0_WAKE_N", |
| "CAM_SOF", |
| "RF_ID_EXTENSION_2", |
| "RGBC_IR_INT", |
| "CAM_MCLK0", /* GPIO_100 */ |
| "CAM_MCLK1", |
| "CAM_MCLK2", |
| "CAM_MCLK3", |
| "CAM_MCLK4", |
| "NC", |
| "CAM2_RESET_N", |
| "CCI_I2C0_SDA", |
| "CCI_I2C0_SCL", |
| "CCI_I2C1_SDA", |
| "CCI_I2C1_SCL", /* GPIO_110 */ |
| "CCI_I2C2_SDA", |
| "CCI_I2C2_SCL", |
| "CCI_I2C3_SDA", |
| "CCI_I2C3_SCL", |
| "NC", |
| "PM8008_1_IRQ", |
| "CAM3_RESET_N", |
| "IMU1_INT", |
| "EXT_VD0_XVS", |
| "NC", /* GPIO_120 */ |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "HAP_I2S_CLK", |
| "HAP_I2S_DOUT", |
| "HAP_TRG1", |
| "HAP_I2S_SYNC", |
| "HST_BT_WLAN_SLIMBUS_CLK", |
| "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */ |
| "NC", |
| "UIM2_DETECT_EN", |
| "UIM2_DATA", |
| "UIM2_CLK", |
| "UIM2_RESET", |
| "UIM2_PRESENT", |
| "UIM1_DATA", |
| "UIM1_CLK", |
| "UIM1_RESET", |
| "TRAY_DET", /* GPIO_140 */ |
| "SM_RFFE0_CLK", |
| "SM_RFFE0_DATA", |
| "SM_RFFE1_CLK", |
| "SM_RFFE1_DATA", |
| "SM_MSS_GRFC4", |
| "SM_MSS_GRFC5", |
| "SM_MSS_GRFC6", |
| "SM_MSS_GRFC7", |
| "SM_RFFE4_CLK", |
| "SM_RFFE4_DATA", /* GPIO_150 */ |
| "WLAN_COEX_UART1_RX", |
| "WLAN_COEX_UART1_TX", |
| "HST_SW_CTRL", |
| "DISP_VDDR_EN", |
| "NC", |
| "NC", |
| "PA_INDICATOR_OR", |
| "TOF_RST_N", |
| "QLINK0_REQ", |
| "QLINK0_EN", /* GPIO_160 */ |
| "QLINK0_WMSS_RESET_N", |
| "QLINK1_REQ", |
| "QLINK1_EN", |
| "QLINK1_WMSS_RESET_N", |
| "PM8008_2_IRQ", |
| "TELEC_PWR_EN", |
| "PM8008_2_RESET_N", |
| "WCD_SWR_TX_CLK", |
| "WCD_SWR_TX_DATA0", |
| "WCD_SWR_TX_DATA1", /* GPIO_170 */ |
| "WCD_SWR_RX_CLK", |
| "WCD_SWR_RX_DATA0", |
| "WCD_SWR_RX_DATA1", |
| "SM_DMIC1_CLK", |
| "SM_DMIC1_DATA", |
| "SM_DMIC2_CLK", |
| "SM_DMIC2_DATA", |
| "SPK_AMP_I2S_CLK", |
| "SPK_AMP_I2S_WS", |
| "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */ |
| "SPK_AMP_I2S_ASP_DOUT", |
| "WCD_SWR_TX_DATA2", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "IMU_SPI_MISO", |
| "IMU_SPI_MOSI", |
| "IMU_SPI_CLK", |
| "IMU_SPI_CS_N", /* GPIO_190 */ |
| "MAG_I2C_SDA", |
| "MAG_I2C_SCL", |
| "SENSOR_I2C_SDA", |
| "SENSOR_I2C_SCL", |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "HST_BLE_UART_TX", |
| "HST_BLE_UART_RX", /* GPIO_200 */ |
| "HST_WLAN_UART_TX", |
| "HST_WLAN_UART_RX"; |
| }; |
