| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * raid1.c : Multiple Devices driver for Linux |
| * |
| * Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat |
| * |
| * Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman |
| * |
| * RAID-1 management functions. |
| * |
| * Better read-balancing code written by Mika Kuoppala <miku@iki.fi>, 2000 |
| * |
| * Fixes to reconstruction by Jakob Østergaard" <jakob@ostenfeld.dk> |
| * Various fixes by Neil Brown <neilb@cse.unsw.edu.au> |
| * |
| * Changes by Peter T. Breuer <ptb@it.uc3m.es> 31/1/2003 to support |
| * bitmapped intelligence in resync: |
| * |
| * - bitmap marked during normal i/o |
| * - bitmap used to skip nondirty blocks during sync |
| * |
| * Additions to bitmap code, (C) 2003-2004 Paul Clements, SteelEye Technology: |
| * - persistent bitmap code |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/blkdev.h> |
| #include <linux/module.h> |
| #include <linux/seq_file.h> |
| #include <linux/ratelimit.h> |
| #include <linux/interval_tree_generic.h> |
| |
| #include <trace/events/block.h> |
| |
| #include "md.h" |
| #include "raid1.h" |
| #include "md-bitmap.h" |
| |
| #define UNSUPPORTED_MDDEV_FLAGS \ |
| ((1L << MD_HAS_JOURNAL) | \ |
| (1L << MD_JOURNAL_CLEAN) | \ |
| (1L << MD_HAS_PPL) | \ |
| (1L << MD_HAS_MULTIPLE_PPLS)) |
| |
| static void allow_barrier(struct r1conf *conf, sector_t sector_nr); |
| static void lower_barrier(struct r1conf *conf, sector_t sector_nr); |
| |
| #define RAID_1_10_NAME "raid1" |
| #include "raid1-10.c" |
| |
| #define START(node) ((node)->start) |
| #define LAST(node) ((node)->last) |
| INTERVAL_TREE_DEFINE(struct serial_info, node, sector_t, _subtree_last, |
| START, LAST, static inline, raid1_rb); |
| |
| static int check_and_add_serial(struct md_rdev *rdev, struct r1bio *r1_bio, |
| struct serial_info *si, int idx) |
| { |
| unsigned long flags; |
| int ret = 0; |
| sector_t lo = r1_bio->sector; |
| sector_t hi = lo + r1_bio->sectors; |
| struct serial_in_rdev *serial = &rdev->serial[idx]; |
| |
| spin_lock_irqsave(&serial->serial_lock, flags); |
| /* collision happened */ |
| if (raid1_rb_iter_first(&serial->serial_rb, lo, hi)) |
| ret = -EBUSY; |
| else { |
| si->start = lo; |
| si->last = hi; |
| raid1_rb_insert(si, &serial->serial_rb); |
| } |
| spin_unlock_irqrestore(&serial->serial_lock, flags); |
| |
| return ret; |
| } |
| |
| static void wait_for_serialization(struct md_rdev *rdev, struct r1bio *r1_bio) |
| { |
| struct mddev *mddev = rdev->mddev; |
| struct serial_info *si; |
| int idx = sector_to_idx(r1_bio->sector); |
| struct serial_in_rdev *serial = &rdev->serial[idx]; |
| |
| if (WARN_ON(!mddev->serial_info_pool)) |
| return; |
| si = mempool_alloc(mddev->serial_info_pool, GFP_NOIO); |
| wait_event(serial->serial_io_wait, |
| check_and_add_serial(rdev, r1_bio, si, idx) == 0); |
| } |
| |
| static void remove_serial(struct md_rdev *rdev, sector_t lo, sector_t hi) |
| { |
| struct serial_info *si; |
| unsigned long flags; |
| int found = 0; |
| struct mddev *mddev = rdev->mddev; |
| int idx = sector_to_idx(lo); |
| struct serial_in_rdev *serial = &rdev->serial[idx]; |
| |
| spin_lock_irqsave(&serial->serial_lock, flags); |
| for (si = raid1_rb_iter_first(&serial->serial_rb, lo, hi); |
| si; si = raid1_rb_iter_next(si, lo, hi)) { |
| if (si->start == lo && si->last == hi) { |
| raid1_rb_remove(si, &serial->serial_rb); |
| mempool_free(si, mddev->serial_info_pool); |
| found = 1; |
| break; |
| } |
| } |
| if (!found) |
| WARN(1, "The write IO is not recorded for serialization\n"); |
| spin_unlock_irqrestore(&serial->serial_lock, flags); |
| wake_up(&serial->serial_io_wait); |
| } |
| |
| /* |
| * for resync bio, r1bio pointer can be retrieved from the per-bio |
| * 'struct resync_pages'. |
| */ |
| static inline struct r1bio *get_resync_r1bio(struct bio *bio) |
| { |
| return get_resync_pages(bio)->raid_bio; |
| } |
| |
| static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data) |
| { |
| struct pool_info *pi = data; |
| int size = offsetof(struct r1bio, bios[pi->raid_disks]); |
| |
| /* allocate a r1bio with room for raid_disks entries in the bios array */ |
| return kzalloc(size, gfp_flags); |
| } |
| |
| #define RESYNC_DEPTH 32 |
| #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9) |
| #define RESYNC_WINDOW (RESYNC_BLOCK_SIZE * RESYNC_DEPTH) |
| #define RESYNC_WINDOW_SECTORS (RESYNC_WINDOW >> 9) |
| #define CLUSTER_RESYNC_WINDOW (16 * RESYNC_WINDOW) |
| #define CLUSTER_RESYNC_WINDOW_SECTORS (CLUSTER_RESYNC_WINDOW >> 9) |
| |
| static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data) |
| { |
| struct pool_info *pi = data; |
| struct r1bio *r1_bio; |
| struct bio *bio; |
| int need_pages; |
| int j; |
| struct resync_pages *rps; |
| |
| r1_bio = r1bio_pool_alloc(gfp_flags, pi); |
| if (!r1_bio) |
| return NULL; |
| |
| rps = kmalloc_array(pi->raid_disks, sizeof(struct resync_pages), |
| gfp_flags); |
| if (!rps) |
| goto out_free_r1bio; |
| |
| /* |
| * Allocate bios : 1 for reading, n-1 for writing |
| */ |
| for (j = pi->raid_disks ; j-- ; ) { |
| bio = bio_kmalloc(RESYNC_PAGES, gfp_flags); |
| if (!bio) |
| goto out_free_bio; |
| bio_init(bio, NULL, bio->bi_inline_vecs, RESYNC_PAGES, 0); |
| r1_bio->bios[j] = bio; |
| } |
| /* |
| * Allocate RESYNC_PAGES data pages and attach them to |
| * the first bio. |
| * If this is a user-requested check/repair, allocate |
| * RESYNC_PAGES for each bio. |
| */ |
| if (test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery)) |
| need_pages = pi->raid_disks; |
| else |
| need_pages = 1; |
| for (j = 0; j < pi->raid_disks; j++) { |
| struct resync_pages *rp = &rps[j]; |
| |
| bio = r1_bio->bios[j]; |
| |
| if (j < need_pages) { |
| if (resync_alloc_pages(rp, gfp_flags)) |
| goto out_free_pages; |
| } else { |
| memcpy(rp, &rps[0], sizeof(*rp)); |
| resync_get_all_pages(rp); |
| } |
| |
| rp->raid_bio = r1_bio; |
| bio->bi_private = rp; |
| } |
| |
| r1_bio->master_bio = NULL; |
| |
| return r1_bio; |
| |
| out_free_pages: |
| while (--j >= 0) |
| resync_free_pages(&rps[j]); |
| |
| out_free_bio: |
| while (++j < pi->raid_disks) { |
| bio_uninit(r1_bio->bios[j]); |
| kfree(r1_bio->bios[j]); |
| } |
| kfree(rps); |
| |
| out_free_r1bio: |
| rbio_pool_free(r1_bio, data); |
| return NULL; |
| } |
| |
| static void r1buf_pool_free(void *__r1_bio, void *data) |
| { |
| struct pool_info *pi = data; |
| int i; |
| struct r1bio *r1bio = __r1_bio; |
| struct resync_pages *rp = NULL; |
| |
| for (i = pi->raid_disks; i--; ) { |
| rp = get_resync_pages(r1bio->bios[i]); |
| resync_free_pages(rp); |
| bio_uninit(r1bio->bios[i]); |
| kfree(r1bio->bios[i]); |
| } |
| |
| /* resync pages array stored in the 1st bio's .bi_private */ |
| kfree(rp); |
| |
| rbio_pool_free(r1bio, data); |
| } |
| |
| static void put_all_bios(struct r1conf *conf, struct r1bio *r1_bio) |
| { |
| int i; |
| |
| for (i = 0; i < conf->raid_disks * 2; i++) { |
| struct bio **bio = r1_bio->bios + i; |
| if (!BIO_SPECIAL(*bio)) |
| bio_put(*bio); |
| *bio = NULL; |
| } |
| } |
| |
| static void free_r1bio(struct r1bio *r1_bio) |
| { |
| struct r1conf *conf = r1_bio->mddev->private; |
| |
| put_all_bios(conf, r1_bio); |
| mempool_free(r1_bio, &conf->r1bio_pool); |
| } |
| |
| static void put_buf(struct r1bio *r1_bio) |
| { |
| struct r1conf *conf = r1_bio->mddev->private; |
| sector_t sect = r1_bio->sector; |
| int i; |
| |
| for (i = 0; i < conf->raid_disks * 2; i++) { |
| struct bio *bio = r1_bio->bios[i]; |
| if (bio->bi_end_io) |
| rdev_dec_pending(conf->mirrors[i].rdev, r1_bio->mddev); |
| } |
| |
| mempool_free(r1_bio, &conf->r1buf_pool); |
| |
| lower_barrier(conf, sect); |
| } |
| |
| static void reschedule_retry(struct r1bio *r1_bio) |
| { |
| unsigned long flags; |
| struct mddev *mddev = r1_bio->mddev; |
| struct r1conf *conf = mddev->private; |
| int idx; |
| |
| idx = sector_to_idx(r1_bio->sector); |
| spin_lock_irqsave(&conf->device_lock, flags); |
| list_add(&r1_bio->retry_list, &conf->retry_list); |
| atomic_inc(&conf->nr_queued[idx]); |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| |
| wake_up(&conf->wait_barrier); |
| md_wakeup_thread(mddev->thread); |
| } |
| |
| /* |
| * raid_end_bio_io() is called when we have finished servicing a mirrored |
| * operation and are ready to return a success/failure code to the buffer |
| * cache layer. |
| */ |
| static void call_bio_endio(struct r1bio *r1_bio) |
| { |
| struct bio *bio = r1_bio->master_bio; |
| |
| if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) |
| bio->bi_status = BLK_STS_IOERR; |
| |
| bio_endio(bio); |
| } |
| |
| static void raid_end_bio_io(struct r1bio *r1_bio) |
| { |
| struct bio *bio = r1_bio->master_bio; |
| struct r1conf *conf = r1_bio->mddev->private; |
| sector_t sector = r1_bio->sector; |
| |
| /* if nobody has done the final endio yet, do it now */ |
| if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { |
| pr_debug("raid1: sync end %s on sectors %llu-%llu\n", |
| (bio_data_dir(bio) == WRITE) ? "write" : "read", |
| (unsigned long long) bio->bi_iter.bi_sector, |
| (unsigned long long) bio_end_sector(bio) - 1); |
| |
| call_bio_endio(r1_bio); |
| } |
| |
| free_r1bio(r1_bio); |
| /* |
| * Wake up any possible resync thread that waits for the device |
| * to go idle. All I/Os, even write-behind writes, are done. |
| */ |
| allow_barrier(conf, sector); |
| } |
| |
| /* |
| * Update disk head position estimator based on IRQ completion info. |
| */ |
| static inline void update_head_pos(int disk, struct r1bio *r1_bio) |
| { |
| struct r1conf *conf = r1_bio->mddev->private; |
| |
| conf->mirrors[disk].head_position = |
| r1_bio->sector + (r1_bio->sectors); |
| } |
| |
| /* |
| * Find the disk number which triggered given bio |
| */ |
| static int find_bio_disk(struct r1bio *r1_bio, struct bio *bio) |
| { |
| int mirror; |
| struct r1conf *conf = r1_bio->mddev->private; |
| int raid_disks = conf->raid_disks; |
| |
| for (mirror = 0; mirror < raid_disks * 2; mirror++) |
| if (r1_bio->bios[mirror] == bio) |
| break; |
| |
| BUG_ON(mirror == raid_disks * 2); |
| update_head_pos(mirror, r1_bio); |
| |
| return mirror; |
| } |
| |
| static void raid1_end_read_request(struct bio *bio) |
| { |
| int uptodate = !bio->bi_status; |
| struct r1bio *r1_bio = bio->bi_private; |
| struct r1conf *conf = r1_bio->mddev->private; |
| struct md_rdev *rdev = conf->mirrors[r1_bio->read_disk].rdev; |
| |
| /* |
| * this branch is our 'one mirror IO has finished' event handler: |
| */ |
| update_head_pos(r1_bio->read_disk, r1_bio); |
| |
| if (uptodate) |
| set_bit(R1BIO_Uptodate, &r1_bio->state); |
| else if (test_bit(FailFast, &rdev->flags) && |
| test_bit(R1BIO_FailFast, &r1_bio->state)) |
| /* This was a fail-fast read so we definitely |
| * want to retry */ |
| ; |
| else { |
| /* If all other devices have failed, we want to return |
| * the error upwards rather than fail the last device. |
| * Here we redefine "uptodate" to mean "Don't want to retry" |
| */ |
| unsigned long flags; |
| spin_lock_irqsave(&conf->device_lock, flags); |
| if (r1_bio->mddev->degraded == conf->raid_disks || |
| (r1_bio->mddev->degraded == conf->raid_disks-1 && |
| test_bit(In_sync, &rdev->flags))) |
| uptodate = 1; |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| } |
| |
| if (uptodate) { |
| raid_end_bio_io(r1_bio); |
| rdev_dec_pending(rdev, conf->mddev); |
| } else { |
| /* |
| * oops, read error: |
| */ |
| pr_err_ratelimited("md/raid1:%s: %pg: rescheduling sector %llu\n", |
| mdname(conf->mddev), |
| rdev->bdev, |
| (unsigned long long)r1_bio->sector); |
| set_bit(R1BIO_ReadError, &r1_bio->state); |
| reschedule_retry(r1_bio); |
| /* don't drop the reference on read_disk yet */ |
| } |
| } |
| |
| static void close_write(struct r1bio *r1_bio) |
| { |
| struct mddev *mddev = r1_bio->mddev; |
| |
| /* it really is the end of this request */ |
| if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { |
| bio_free_pages(r1_bio->behind_master_bio); |
| bio_put(r1_bio->behind_master_bio); |
| r1_bio->behind_master_bio = NULL; |
| } |
| |
| /* clear the bitmap if all writes complete successfully */ |
| mddev->bitmap_ops->endwrite(mddev, r1_bio->sector, r1_bio->sectors, |
| !test_bit(R1BIO_Degraded, &r1_bio->state), |
| test_bit(R1BIO_BehindIO, &r1_bio->state)); |
| md_write_end(mddev); |
| } |
| |
| static void r1_bio_write_done(struct r1bio *r1_bio) |
| { |
| if (!atomic_dec_and_test(&r1_bio->remaining)) |
| return; |
| |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) |
| reschedule_retry(r1_bio); |
| else { |
| close_write(r1_bio); |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state)) |
| reschedule_retry(r1_bio); |
| else |
| raid_end_bio_io(r1_bio); |
| } |
| } |
| |
| static void raid1_end_write_request(struct bio *bio) |
| { |
| struct r1bio *r1_bio = bio->bi_private; |
| int behind = test_bit(R1BIO_BehindIO, &r1_bio->state); |
| struct r1conf *conf = r1_bio->mddev->private; |
| struct bio *to_put = NULL; |
| int mirror = find_bio_disk(r1_bio, bio); |
| struct md_rdev *rdev = conf->mirrors[mirror].rdev; |
| bool discard_error; |
| sector_t lo = r1_bio->sector; |
| sector_t hi = r1_bio->sector + r1_bio->sectors; |
| |
| discard_error = bio->bi_status && bio_op(bio) == REQ_OP_DISCARD; |
| |
| /* |
| * 'one mirror IO has finished' event handler: |
| */ |
| if (bio->bi_status && !discard_error) { |
| set_bit(WriteErrorSeen, &rdev->flags); |
| if (!test_and_set_bit(WantReplacement, &rdev->flags)) |
| set_bit(MD_RECOVERY_NEEDED, & |
| conf->mddev->recovery); |
| |
| if (test_bit(FailFast, &rdev->flags) && |
| (bio->bi_opf & MD_FAILFAST) && |
| /* We never try FailFast to WriteMostly devices */ |
| !test_bit(WriteMostly, &rdev->flags)) { |
| md_error(r1_bio->mddev, rdev); |
| } |
| |
| /* |
| * When the device is faulty, it is not necessary to |
| * handle write error. |
| */ |
| if (!test_bit(Faulty, &rdev->flags)) |
| set_bit(R1BIO_WriteError, &r1_bio->state); |
| else { |
| /* Fail the request */ |
| set_bit(R1BIO_Degraded, &r1_bio->state); |
| /* Finished with this branch */ |
| r1_bio->bios[mirror] = NULL; |
| to_put = bio; |
| } |
| } else { |
| /* |
| * Set R1BIO_Uptodate in our master bio, so that we |
| * will return a good error code for to the higher |
| * levels even if IO on some other mirrored buffer |
| * fails. |
| * |
| * The 'master' represents the composite IO operation |
| * to user-side. So if something waits for IO, then it |
| * will wait for the 'master' bio. |
| */ |
| r1_bio->bios[mirror] = NULL; |
| to_put = bio; |
| /* |
| * Do not set R1BIO_Uptodate if the current device is |
| * rebuilding or Faulty. This is because we cannot use |
| * such device for properly reading the data back (we could |
| * potentially use it, if the current write would have felt |
| * before rdev->recovery_offset, but for simplicity we don't |
| * check this here. |
| */ |
| if (test_bit(In_sync, &rdev->flags) && |
| !test_bit(Faulty, &rdev->flags)) |
| set_bit(R1BIO_Uptodate, &r1_bio->state); |
| |
| /* Maybe we can clear some bad blocks. */ |
| if (rdev_has_badblock(rdev, r1_bio->sector, r1_bio->sectors) && |
| !discard_error) { |
| r1_bio->bios[mirror] = IO_MADE_GOOD; |
| set_bit(R1BIO_MadeGood, &r1_bio->state); |
| } |
| } |
| |
| if (behind) { |
| if (test_bit(CollisionCheck, &rdev->flags)) |
| remove_serial(rdev, lo, hi); |
| if (test_bit(WriteMostly, &rdev->flags)) |
| atomic_dec(&r1_bio->behind_remaining); |
| |
| /* |
| * In behind mode, we ACK the master bio once the I/O |
| * has safely reached all non-writemostly |
| * disks. Setting the Returned bit ensures that this |
| * gets done only once -- we don't ever want to return |
| * -EIO here, instead we'll wait |
| */ |
| if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) && |
| test_bit(R1BIO_Uptodate, &r1_bio->state)) { |
| /* Maybe we can return now */ |
| if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { |
| struct bio *mbio = r1_bio->master_bio; |
| pr_debug("raid1: behind end write sectors" |
| " %llu-%llu\n", |
| (unsigned long long) mbio->bi_iter.bi_sector, |
| (unsigned long long) bio_end_sector(mbio) - 1); |
| call_bio_endio(r1_bio); |
| } |
| } |
| } else if (rdev->mddev->serialize_policy) |
| remove_serial(rdev, lo, hi); |
| if (r1_bio->bios[mirror] == NULL) |
| rdev_dec_pending(rdev, conf->mddev); |
| |
| /* |
| * Let's see if all mirrored write operations have finished |
| * already. |
| */ |
| r1_bio_write_done(r1_bio); |
| |
| if (to_put) |
| bio_put(to_put); |
| } |
| |
| static sector_t align_to_barrier_unit_end(sector_t start_sector, |
| sector_t sectors) |
| { |
| sector_t len; |
| |
| WARN_ON(sectors == 0); |
| /* |
| * len is the number of sectors from start_sector to end of the |
| * barrier unit which start_sector belongs to. |
| */ |
| len = round_up(start_sector + 1, BARRIER_UNIT_SECTOR_SIZE) - |
| start_sector; |
| |
| if (len > sectors) |
| len = sectors; |
| |
| return len; |
| } |
| |
| static void update_read_sectors(struct r1conf *conf, int disk, |
| sector_t this_sector, int len) |
| { |
| struct raid1_info *info = &conf->mirrors[disk]; |
| |
| atomic_inc(&info->rdev->nr_pending); |
| if (info->next_seq_sect != this_sector) |
| info->seq_start = this_sector; |
| info->next_seq_sect = this_sector + len; |
| } |
| |
| static int choose_first_rdev(struct r1conf *conf, struct r1bio *r1_bio, |
| int *max_sectors) |
| { |
| sector_t this_sector = r1_bio->sector; |
| int len = r1_bio->sectors; |
| int disk; |
| |
| for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) { |
| struct md_rdev *rdev; |
| int read_len; |
| |
| if (r1_bio->bios[disk] == IO_BLOCKED) |
| continue; |
| |
| rdev = conf->mirrors[disk].rdev; |
| if (!rdev || test_bit(Faulty, &rdev->flags)) |
| continue; |
| |
| /* choose the first disk even if it has some bad blocks. */ |
| read_len = raid1_check_read_range(rdev, this_sector, &len); |
| if (read_len > 0) { |
| update_read_sectors(conf, disk, this_sector, read_len); |
| *max_sectors = read_len; |
| return disk; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static bool rdev_in_recovery(struct md_rdev *rdev, struct r1bio *r1_bio) |
| { |
| return !test_bit(In_sync, &rdev->flags) && |
| rdev->recovery_offset < r1_bio->sector + r1_bio->sectors; |
| } |
| |
| static int choose_bb_rdev(struct r1conf *conf, struct r1bio *r1_bio, |
| int *max_sectors) |
| { |
| sector_t this_sector = r1_bio->sector; |
| int best_disk = -1; |
| int best_len = 0; |
| int disk; |
| |
| for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) { |
| struct md_rdev *rdev; |
| int len; |
| int read_len; |
| |
| if (r1_bio->bios[disk] == IO_BLOCKED) |
| continue; |
| |
| rdev = conf->mirrors[disk].rdev; |
| if (!rdev || test_bit(Faulty, &rdev->flags) || |
| rdev_in_recovery(rdev, r1_bio) || |
| test_bit(WriteMostly, &rdev->flags)) |
| continue; |
| |
| /* keep track of the disk with the most readable sectors. */ |
| len = r1_bio->sectors; |
| read_len = raid1_check_read_range(rdev, this_sector, &len); |
| if (read_len > best_len) { |
| best_disk = disk; |
| best_len = read_len; |
| } |
| } |
| |
| if (best_disk != -1) { |
| *max_sectors = best_len; |
| update_read_sectors(conf, best_disk, this_sector, best_len); |
| } |
| |
| return best_disk; |
| } |
| |
| static int choose_slow_rdev(struct r1conf *conf, struct r1bio *r1_bio, |
| int *max_sectors) |
| { |
| sector_t this_sector = r1_bio->sector; |
| int bb_disk = -1; |
| int bb_read_len = 0; |
| int disk; |
| |
| for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) { |
| struct md_rdev *rdev; |
| int len; |
| int read_len; |
| |
| if (r1_bio->bios[disk] == IO_BLOCKED) |
| continue; |
| |
| rdev = conf->mirrors[disk].rdev; |
| if (!rdev || test_bit(Faulty, &rdev->flags) || |
| !test_bit(WriteMostly, &rdev->flags) || |
| rdev_in_recovery(rdev, r1_bio)) |
| continue; |
| |
| /* there are no bad blocks, we can use this disk */ |
| len = r1_bio->sectors; |
| read_len = raid1_check_read_range(rdev, this_sector, &len); |
| if (read_len == r1_bio->sectors) { |
| *max_sectors = read_len; |
| update_read_sectors(conf, disk, this_sector, read_len); |
| return disk; |
| } |
| |
| /* |
| * there are partial bad blocks, choose the rdev with largest |
| * read length. |
| */ |
| if (read_len > bb_read_len) { |
| bb_disk = disk; |
| bb_read_len = read_len; |
| } |
| } |
| |
| if (bb_disk != -1) { |
| *max_sectors = bb_read_len; |
| update_read_sectors(conf, bb_disk, this_sector, bb_read_len); |
| } |
| |
| return bb_disk; |
| } |
| |
| static bool is_sequential(struct r1conf *conf, int disk, struct r1bio *r1_bio) |
| { |
| /* TODO: address issues with this check and concurrency. */ |
| return conf->mirrors[disk].next_seq_sect == r1_bio->sector || |
| conf->mirrors[disk].head_position == r1_bio->sector; |
| } |
| |
| /* |
| * If buffered sequential IO size exceeds optimal iosize, check if there is idle |
| * disk. If yes, choose the idle disk. |
| */ |
| static bool should_choose_next(struct r1conf *conf, int disk) |
| { |
| struct raid1_info *mirror = &conf->mirrors[disk]; |
| int opt_iosize; |
| |
| if (!test_bit(Nonrot, &mirror->rdev->flags)) |
| return false; |
| |
| opt_iosize = bdev_io_opt(mirror->rdev->bdev) >> 9; |
| return opt_iosize > 0 && mirror->seq_start != MaxSector && |
| mirror->next_seq_sect > opt_iosize && |
| mirror->next_seq_sect - opt_iosize >= mirror->seq_start; |
| } |
| |
| static bool rdev_readable(struct md_rdev *rdev, struct r1bio *r1_bio) |
| { |
| if (!rdev || test_bit(Faulty, &rdev->flags)) |
| return false; |
| |
| if (rdev_in_recovery(rdev, r1_bio)) |
| return false; |
| |
| /* don't read from slow disk unless have to */ |
| if (test_bit(WriteMostly, &rdev->flags)) |
| return false; |
| |
| /* don't split IO for bad blocks unless have to */ |
| if (rdev_has_badblock(rdev, r1_bio->sector, r1_bio->sectors)) |
| return false; |
| |
| return true; |
| } |
| |
| struct read_balance_ctl { |
| sector_t closest_dist; |
| int closest_dist_disk; |
| int min_pending; |
| int min_pending_disk; |
| int sequential_disk; |
| int readable_disks; |
| }; |
| |
| static int choose_best_rdev(struct r1conf *conf, struct r1bio *r1_bio) |
| { |
| int disk; |
| struct read_balance_ctl ctl = { |
| .closest_dist_disk = -1, |
| .closest_dist = MaxSector, |
| .min_pending_disk = -1, |
| .min_pending = UINT_MAX, |
| .sequential_disk = -1, |
| }; |
| |
| for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) { |
| struct md_rdev *rdev; |
| sector_t dist; |
| unsigned int pending; |
| |
| if (r1_bio->bios[disk] == IO_BLOCKED) |
| continue; |
| |
| rdev = conf->mirrors[disk].rdev; |
| if (!rdev_readable(rdev, r1_bio)) |
| continue; |
| |
| /* At least two disks to choose from so failfast is OK */ |
| if (ctl.readable_disks++ == 1) |
| set_bit(R1BIO_FailFast, &r1_bio->state); |
| |
| pending = atomic_read(&rdev->nr_pending); |
| dist = abs(r1_bio->sector - conf->mirrors[disk].head_position); |
| |
| /* Don't change to another disk for sequential reads */ |
| if (is_sequential(conf, disk, r1_bio)) { |
| if (!should_choose_next(conf, disk)) |
| return disk; |
| |
| /* |
| * Add 'pending' to avoid choosing this disk if |
| * there is other idle disk. |
| */ |
| pending++; |
| /* |
| * If there is no other idle disk, this disk |
| * will be chosen. |
| */ |
| ctl.sequential_disk = disk; |
| } |
| |
| if (ctl.min_pending > pending) { |
| ctl.min_pending = pending; |
| ctl.min_pending_disk = disk; |
| } |
| |
| if (ctl.closest_dist > dist) { |
| ctl.closest_dist = dist; |
| ctl.closest_dist_disk = disk; |
| } |
| } |
| |
| /* |
| * sequential IO size exceeds optimal iosize, however, there is no other |
| * idle disk, so choose the sequential disk. |
| */ |
| if (ctl.sequential_disk != -1 && ctl.min_pending != 0) |
| return ctl.sequential_disk; |
| |
| /* |
| * If all disks are rotational, choose the closest disk. If any disk is |
| * non-rotational, choose the disk with less pending request even the |
| * disk is rotational, which might/might not be optimal for raids with |
| * mixed ratation/non-rotational disks depending on workload. |
| */ |
| if (ctl.min_pending_disk != -1 && |
| (READ_ONCE(conf->nonrot_disks) || ctl.min_pending == 0)) |
| return ctl.min_pending_disk; |
| else |
| return ctl.closest_dist_disk; |
| } |
| |
| /* |
| * This routine returns the disk from which the requested read should be done. |
| * |
| * 1) If resync is in progress, find the first usable disk and use it even if it |
| * has some bad blocks. |
| * |
| * 2) Now that there is no resync, loop through all disks and skipping slow |
| * disks and disks with bad blocks for now. Only pay attention to key disk |
| * choice. |
| * |
| * 3) If we've made it this far, now look for disks with bad blocks and choose |
| * the one with most number of sectors. |
| * |
| * 4) If we are all the way at the end, we have no choice but to use a disk even |
| * if it is write mostly. |
| * |
| * The rdev for the device selected will have nr_pending incremented. |
| */ |
| static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, |
| int *max_sectors) |
| { |
| int disk; |
| |
| clear_bit(R1BIO_FailFast, &r1_bio->state); |
| |
| if (raid1_should_read_first(conf->mddev, r1_bio->sector, |
| r1_bio->sectors)) |
| return choose_first_rdev(conf, r1_bio, max_sectors); |
| |
| disk = choose_best_rdev(conf, r1_bio); |
| if (disk >= 0) { |
| *max_sectors = r1_bio->sectors; |
| update_read_sectors(conf, disk, r1_bio->sector, |
| r1_bio->sectors); |
| return disk; |
| } |
| |
| /* |
| * If we are here it means we didn't find a perfectly good disk so |
| * now spend a bit more time trying to find one with the most good |
| * sectors. |
| */ |
| disk = choose_bb_rdev(conf, r1_bio, max_sectors); |
| if (disk >= 0) |
| return disk; |
| |
| return choose_slow_rdev(conf, r1_bio, max_sectors); |
| } |
| |
| static void wake_up_barrier(struct r1conf *conf) |
| { |
| if (wq_has_sleeper(&conf->wait_barrier)) |
| wake_up(&conf->wait_barrier); |
| } |
| |
| static void flush_bio_list(struct r1conf *conf, struct bio *bio) |
| { |
| /* flush any pending bitmap writes to disk before proceeding w/ I/O */ |
| raid1_prepare_flush_writes(conf->mddev); |
| wake_up_barrier(conf); |
| |
| while (bio) { /* submit pending writes */ |
| struct bio *next = bio->bi_next; |
| |
| raid1_submit_write(bio); |
| bio = next; |
| cond_resched(); |
| } |
| } |
| |
| static void flush_pending_writes(struct r1conf *conf) |
| { |
| /* Any writes that have been queued but are awaiting |
| * bitmap updates get flushed here. |
| */ |
| spin_lock_irq(&conf->device_lock); |
| |
| if (conf->pending_bio_list.head) { |
| struct blk_plug plug; |
| struct bio *bio; |
| |
| bio = bio_list_get(&conf->pending_bio_list); |
| spin_unlock_irq(&conf->device_lock); |
| |
| /* |
| * As this is called in a wait_event() loop (see freeze_array), |
| * current->state might be TASK_UNINTERRUPTIBLE which will |
| * cause a warning when we prepare to wait again. As it is |
| * rare that this path is taken, it is perfectly safe to force |
| * us to go around the wait_event() loop again, so the warning |
| * is a false-positive. Silence the warning by resetting |
| * thread state |
| */ |
| __set_current_state(TASK_RUNNING); |
| blk_start_plug(&plug); |
| flush_bio_list(conf, bio); |
| blk_finish_plug(&plug); |
| } else |
| spin_unlock_irq(&conf->device_lock); |
| } |
| |
| /* Barriers.... |
| * Sometimes we need to suspend IO while we do something else, |
| * either some resync/recovery, or reconfigure the array. |
| * To do this we raise a 'barrier'. |
| * The 'barrier' is a counter that can be raised multiple times |
| * to count how many activities are happening which preclude |
| * normal IO. |
| * We can only raise the barrier if there is no pending IO. |
| * i.e. if nr_pending == 0. |
| * We choose only to raise the barrier if no-one is waiting for the |
| * barrier to go down. This means that as soon as an IO request |
| * is ready, no other operations which require a barrier will start |
| * until the IO request has had a chance. |
| * |
| * So: regular IO calls 'wait_barrier'. When that returns there |
| * is no backgroup IO happening, It must arrange to call |
| * allow_barrier when it has finished its IO. |
| * backgroup IO calls must call raise_barrier. Once that returns |
| * there is no normal IO happeing. It must arrange to call |
| * lower_barrier when the particular background IO completes. |
| * |
| * If resync/recovery is interrupted, returns -EINTR; |
| * Otherwise, returns 0. |
| */ |
| static int raise_barrier(struct r1conf *conf, sector_t sector_nr) |
| { |
| int idx = sector_to_idx(sector_nr); |
| |
| spin_lock_irq(&conf->resync_lock); |
| |
| /* Wait until no block IO is waiting */ |
| wait_event_lock_irq(conf->wait_barrier, |
| !atomic_read(&conf->nr_waiting[idx]), |
| conf->resync_lock); |
| |
| /* block any new IO from starting */ |
| atomic_inc(&conf->barrier[idx]); |
| /* |
| * In raise_barrier() we firstly increase conf->barrier[idx] then |
| * check conf->nr_pending[idx]. In _wait_barrier() we firstly |
| * increase conf->nr_pending[idx] then check conf->barrier[idx]. |
| * A memory barrier here to make sure conf->nr_pending[idx] won't |
| * be fetched before conf->barrier[idx] is increased. Otherwise |
| * there will be a race between raise_barrier() and _wait_barrier(). |
| */ |
| smp_mb__after_atomic(); |
| |
| /* For these conditions we must wait: |
| * A: while the array is in frozen state |
| * B: while conf->nr_pending[idx] is not 0, meaning regular I/O |
| * existing in corresponding I/O barrier bucket. |
| * C: while conf->barrier[idx] >= RESYNC_DEPTH, meaning reaches |
| * max resync count which allowed on current I/O barrier bucket. |
| */ |
| wait_event_lock_irq(conf->wait_barrier, |
| (!conf->array_frozen && |
| !atomic_read(&conf->nr_pending[idx]) && |
| atomic_read(&conf->barrier[idx]) < RESYNC_DEPTH) || |
| test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery), |
| conf->resync_lock); |
| |
| if (test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) { |
| atomic_dec(&conf->barrier[idx]); |
| spin_unlock_irq(&conf->resync_lock); |
| wake_up(&conf->wait_barrier); |
| return -EINTR; |
| } |
| |
| atomic_inc(&conf->nr_sync_pending); |
| spin_unlock_irq(&conf->resync_lock); |
| |
| return 0; |
| } |
| |
| static void lower_barrier(struct r1conf *conf, sector_t sector_nr) |
| { |
| int idx = sector_to_idx(sector_nr); |
| |
| BUG_ON(atomic_read(&conf->barrier[idx]) <= 0); |
| |
| atomic_dec(&conf->barrier[idx]); |
| atomic_dec(&conf->nr_sync_pending); |
| wake_up(&conf->wait_barrier); |
| } |
| |
| static bool _wait_barrier(struct r1conf *conf, int idx, bool nowait) |
| { |
| bool ret = true; |
| |
| /* |
| * We need to increase conf->nr_pending[idx] very early here, |
| * then raise_barrier() can be blocked when it waits for |
| * conf->nr_pending[idx] to be 0. Then we can avoid holding |
| * conf->resync_lock when there is no barrier raised in same |
| * barrier unit bucket. Also if the array is frozen, I/O |
| * should be blocked until array is unfrozen. |
| */ |
| atomic_inc(&conf->nr_pending[idx]); |
| /* |
| * In _wait_barrier() we firstly increase conf->nr_pending[idx], then |
| * check conf->barrier[idx]. In raise_barrier() we firstly increase |
| * conf->barrier[idx], then check conf->nr_pending[idx]. A memory |
| * barrier is necessary here to make sure conf->barrier[idx] won't be |
| * fetched before conf->nr_pending[idx] is increased. Otherwise there |
| * will be a race between _wait_barrier() and raise_barrier(). |
| */ |
| smp_mb__after_atomic(); |
| |
| /* |
| * Don't worry about checking two atomic_t variables at same time |
| * here. If during we check conf->barrier[idx], the array is |
| * frozen (conf->array_frozen is 1), and chonf->barrier[idx] is |
| * 0, it is safe to return and make the I/O continue. Because the |
| * array is frozen, all I/O returned here will eventually complete |
| * or be queued, no race will happen. See code comment in |
| * frozen_array(). |
| */ |
| if (!READ_ONCE(conf->array_frozen) && |
| !atomic_read(&conf->barrier[idx])) |
| return ret; |
| |
| /* |
| * After holding conf->resync_lock, conf->nr_pending[idx] |
| * should be decreased before waiting for barrier to drop. |
| * Otherwise, we may encounter a race condition because |
| * raise_barrer() might be waiting for conf->nr_pending[idx] |
| * to be 0 at same time. |
| */ |
| spin_lock_irq(&conf->resync_lock); |
| atomic_inc(&conf->nr_waiting[idx]); |
| atomic_dec(&conf->nr_pending[idx]); |
| /* |
| * In case freeze_array() is waiting for |
| * get_unqueued_pending() == extra |
| */ |
| wake_up_barrier(conf); |
| /* Wait for the barrier in same barrier unit bucket to drop. */ |
| |
| /* Return false when nowait flag is set */ |
| if (nowait) { |
| ret = false; |
| } else { |
| wait_event_lock_irq(conf->wait_barrier, |
| !conf->array_frozen && |
| !atomic_read(&conf->barrier[idx]), |
| conf->resync_lock); |
| atomic_inc(&conf->nr_pending[idx]); |
| } |
| |
| atomic_dec(&conf->nr_waiting[idx]); |
| spin_unlock_irq(&conf->resync_lock); |
| return ret; |
| } |
| |
| static bool wait_read_barrier(struct r1conf *conf, sector_t sector_nr, bool nowait) |
| { |
| int idx = sector_to_idx(sector_nr); |
| bool ret = true; |
| |
| /* |
| * Very similar to _wait_barrier(). The difference is, for read |
| * I/O we don't need wait for sync I/O, but if the whole array |
| * is frozen, the read I/O still has to wait until the array is |
| * unfrozen. Since there is no ordering requirement with |
| * conf->barrier[idx] here, memory barrier is unnecessary as well. |
| */ |
| atomic_inc(&conf->nr_pending[idx]); |
| |
| if (!READ_ONCE(conf->array_frozen)) |
| return ret; |
| |
| spin_lock_irq(&conf->resync_lock); |
| atomic_inc(&conf->nr_waiting[idx]); |
| atomic_dec(&conf->nr_pending[idx]); |
| /* |
| * In case freeze_array() is waiting for |
| * get_unqueued_pending() == extra |
| */ |
| wake_up_barrier(conf); |
| /* Wait for array to be unfrozen */ |
| |
| /* Return false when nowait flag is set */ |
| if (nowait) { |
| /* Return false when nowait flag is set */ |
| ret = false; |
| } else { |
| wait_event_lock_irq(conf->wait_barrier, |
| !conf->array_frozen, |
| conf->resync_lock); |
| atomic_inc(&conf->nr_pending[idx]); |
| } |
| |
| atomic_dec(&conf->nr_waiting[idx]); |
| spin_unlock_irq(&conf->resync_lock); |
| return ret; |
| } |
| |
| static bool wait_barrier(struct r1conf *conf, sector_t sector_nr, bool nowait) |
| { |
| int idx = sector_to_idx(sector_nr); |
| |
| return _wait_barrier(conf, idx, nowait); |
| } |
| |
| static void _allow_barrier(struct r1conf *conf, int idx) |
| { |
| atomic_dec(&conf->nr_pending[idx]); |
| wake_up_barrier(conf); |
| } |
| |
| static void allow_barrier(struct r1conf *conf, sector_t sector_nr) |
| { |
| int idx = sector_to_idx(sector_nr); |
| |
| _allow_barrier(conf, idx); |
| } |
| |
| /* conf->resync_lock should be held */ |
| static int get_unqueued_pending(struct r1conf *conf) |
| { |
| int idx, ret; |
| |
| ret = atomic_read(&conf->nr_sync_pending); |
| for (idx = 0; idx < BARRIER_BUCKETS_NR; idx++) |
| ret += atomic_read(&conf->nr_pending[idx]) - |
| atomic_read(&conf->nr_queued[idx]); |
| |
| return ret; |
| } |
| |
| static void freeze_array(struct r1conf *conf, int extra) |
| { |
| /* Stop sync I/O and normal I/O and wait for everything to |
| * go quiet. |
| * This is called in two situations: |
| * 1) management command handlers (reshape, remove disk, quiesce). |
| * 2) one normal I/O request failed. |
| |
| * After array_frozen is set to 1, new sync IO will be blocked at |
| * raise_barrier(), and new normal I/O will blocked at _wait_barrier() |
| * or wait_read_barrier(). The flying I/Os will either complete or be |
| * queued. When everything goes quite, there are only queued I/Os left. |
| |
| * Every flying I/O contributes to a conf->nr_pending[idx], idx is the |
| * barrier bucket index which this I/O request hits. When all sync and |
| * normal I/O are queued, sum of all conf->nr_pending[] will match sum |
| * of all conf->nr_queued[]. But normal I/O failure is an exception, |
| * in handle_read_error(), we may call freeze_array() before trying to |
| * fix the read error. In this case, the error read I/O is not queued, |
| * so get_unqueued_pending() == 1. |
| * |
| * Therefore before this function returns, we need to wait until |
| * get_unqueued_pendings(conf) gets equal to extra. For |
| * normal I/O context, extra is 1, in rested situations extra is 0. |
| */ |
| spin_lock_irq(&conf->resync_lock); |
| conf->array_frozen = 1; |
| mddev_add_trace_msg(conf->mddev, "raid1 wait freeze"); |
| wait_event_lock_irq_cmd( |
| conf->wait_barrier, |
| get_unqueued_pending(conf) == extra, |
| conf->resync_lock, |
| flush_pending_writes(conf)); |
| spin_unlock_irq(&conf->resync_lock); |
| } |
| static void unfreeze_array(struct r1conf *conf) |
| { |
| /* reverse the effect of the freeze */ |
| spin_lock_irq(&conf->resync_lock); |
| conf->array_frozen = 0; |
| spin_unlock_irq(&conf->resync_lock); |
| wake_up(&conf->wait_barrier); |
| } |
| |
| static void alloc_behind_master_bio(struct r1bio *r1_bio, |
| struct bio *bio) |
| { |
| int size = bio->bi_iter.bi_size; |
| unsigned vcnt = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; |
| int i = 0; |
| struct bio *behind_bio = NULL; |
| |
| behind_bio = bio_alloc_bioset(NULL, vcnt, 0, GFP_NOIO, |
| &r1_bio->mddev->bio_set); |
| |
| /* discard op, we don't support writezero/writesame yet */ |
| if (!bio_has_data(bio)) { |
| behind_bio->bi_iter.bi_size = size; |
| goto skip_copy; |
| } |
| |
| while (i < vcnt && size) { |
| struct page *page; |
| int len = min_t(int, PAGE_SIZE, size); |
| |
| page = alloc_page(GFP_NOIO); |
| if (unlikely(!page)) |
| goto free_pages; |
| |
| if (!bio_add_page(behind_bio, page, len, 0)) { |
| put_page(page); |
| goto free_pages; |
| } |
| |
| size -= len; |
| i++; |
| } |
| |
| bio_copy_data(behind_bio, bio); |
| skip_copy: |
| r1_bio->behind_master_bio = behind_bio; |
| set_bit(R1BIO_BehindIO, &r1_bio->state); |
| |
| return; |
| |
| free_pages: |
| pr_debug("%dB behind alloc failed, doing sync I/O\n", |
| bio->bi_iter.bi_size); |
| bio_free_pages(behind_bio); |
| bio_put(behind_bio); |
| } |
| |
| static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule) |
| { |
| struct raid1_plug_cb *plug = container_of(cb, struct raid1_plug_cb, |
| cb); |
| struct mddev *mddev = plug->cb.data; |
| struct r1conf *conf = mddev->private; |
| struct bio *bio; |
| |
| if (from_schedule) { |
| spin_lock_irq(&conf->device_lock); |
| bio_list_merge(&conf->pending_bio_list, &plug->pending); |
| spin_unlock_irq(&conf->device_lock); |
| wake_up_barrier(conf); |
| md_wakeup_thread(mddev->thread); |
| kfree(plug); |
| return; |
| } |
| |
| /* we aren't scheduling, so we can do the write-out directly. */ |
| bio = bio_list_get(&plug->pending); |
| flush_bio_list(conf, bio); |
| kfree(plug); |
| } |
| |
| static void init_r1bio(struct r1bio *r1_bio, struct mddev *mddev, struct bio *bio) |
| { |
| r1_bio->master_bio = bio; |
| r1_bio->sectors = bio_sectors(bio); |
| r1_bio->state = 0; |
| r1_bio->mddev = mddev; |
| r1_bio->sector = bio->bi_iter.bi_sector; |
| } |
| |
| static inline struct r1bio * |
| alloc_r1bio(struct mddev *mddev, struct bio *bio) |
| { |
| struct r1conf *conf = mddev->private; |
| struct r1bio *r1_bio; |
| |
| r1_bio = mempool_alloc(&conf->r1bio_pool, GFP_NOIO); |
| /* Ensure no bio records IO_BLOCKED */ |
| memset(r1_bio->bios, 0, conf->raid_disks * sizeof(r1_bio->bios[0])); |
| init_r1bio(r1_bio, mddev, bio); |
| return r1_bio; |
| } |
| |
| static void raid1_read_request(struct mddev *mddev, struct bio *bio, |
| int max_read_sectors, struct r1bio *r1_bio) |
| { |
| struct r1conf *conf = mddev->private; |
| struct raid1_info *mirror; |
| struct bio *read_bio; |
| const enum req_op op = bio_op(bio); |
| const blk_opf_t do_sync = bio->bi_opf & REQ_SYNC; |
| int max_sectors; |
| int rdisk; |
| bool r1bio_existed = !!r1_bio; |
| |
| /* |
| * If r1_bio is set, we are blocking the raid1d thread |
| * so there is a tiny risk of deadlock. So ask for |
| * emergency memory if needed. |
| */ |
| gfp_t gfp = r1_bio ? (GFP_NOIO | __GFP_HIGH) : GFP_NOIO; |
| |
| /* |
| * Still need barrier for READ in case that whole |
| * array is frozen. |
| */ |
| if (!wait_read_barrier(conf, bio->bi_iter.bi_sector, |
| bio->bi_opf & REQ_NOWAIT)) { |
| bio_wouldblock_error(bio); |
| return; |
| } |
| |
| if (!r1_bio) |
| r1_bio = alloc_r1bio(mddev, bio); |
| else |
| init_r1bio(r1_bio, mddev, bio); |
| r1_bio->sectors = max_read_sectors; |
| |
| /* |
| * make_request() can abort the operation when read-ahead is being |
| * used and no empty request is available. |
| */ |
| rdisk = read_balance(conf, r1_bio, &max_sectors); |
| if (rdisk < 0) { |
| /* couldn't find anywhere to read from */ |
| if (r1bio_existed) |
| pr_crit_ratelimited("md/raid1:%s: %pg: unrecoverable I/O read error for block %llu\n", |
| mdname(mddev), |
| conf->mirrors[r1_bio->read_disk].rdev->bdev, |
| r1_bio->sector); |
| raid_end_bio_io(r1_bio); |
| return; |
| } |
| mirror = conf->mirrors + rdisk; |
| |
| if (r1bio_existed) |
| pr_info_ratelimited("md/raid1:%s: redirecting sector %llu to other mirror: %pg\n", |
| mdname(mddev), |
| (unsigned long long)r1_bio->sector, |
| mirror->rdev->bdev); |
| |
| if (test_bit(WriteMostly, &mirror->rdev->flags)) { |
| /* |
| * Reading from a write-mostly device must take care not to |
| * over-take any writes that are 'behind' |
| */ |
| mddev_add_trace_msg(mddev, "raid1 wait behind writes"); |
| mddev->bitmap_ops->wait_behind_writes(mddev); |
| } |
| |
| if (max_sectors < bio_sectors(bio)) { |
| struct bio *split = bio_split(bio, max_sectors, |
| gfp, &conf->bio_split); |
| bio_chain(split, bio); |
| submit_bio_noacct(bio); |
| bio = split; |
| r1_bio->master_bio = bio; |
| r1_bio->sectors = max_sectors; |
| } |
| |
| r1_bio->read_disk = rdisk; |
| if (!r1bio_existed) { |
| md_account_bio(mddev, &bio); |
| r1_bio->master_bio = bio; |
| } |
| read_bio = bio_alloc_clone(mirror->rdev->bdev, bio, gfp, |
| &mddev->bio_set); |
| |
| r1_bio->bios[rdisk] = read_bio; |
| |
| read_bio->bi_iter.bi_sector = r1_bio->sector + |
| mirror->rdev->data_offset; |
| read_bio->bi_end_io = raid1_end_read_request; |
| read_bio->bi_opf = op | do_sync; |
| if (test_bit(FailFast, &mirror->rdev->flags) && |
| test_bit(R1BIO_FailFast, &r1_bio->state)) |
| read_bio->bi_opf |= MD_FAILFAST; |
| read_bio->bi_private = r1_bio; |
| mddev_trace_remap(mddev, read_bio, r1_bio->sector); |
| submit_bio_noacct(read_bio); |
| } |
| |
| static void raid1_write_request(struct mddev *mddev, struct bio *bio, |
| int max_write_sectors) |
| { |
| struct r1conf *conf = mddev->private; |
| struct r1bio *r1_bio; |
| int i, disks; |
| unsigned long flags; |
| struct md_rdev *blocked_rdev; |
| int first_clone; |
| int max_sectors; |
| bool write_behind = false; |
| bool is_discard = (bio_op(bio) == REQ_OP_DISCARD); |
| |
| if (mddev_is_clustered(mddev) && |
| md_cluster_ops->area_resyncing(mddev, WRITE, |
| bio->bi_iter.bi_sector, bio_end_sector(bio))) { |
| |
| DEFINE_WAIT(w); |
| if (bio->bi_opf & REQ_NOWAIT) { |
| bio_wouldblock_error(bio); |
| return; |
| } |
| for (;;) { |
| prepare_to_wait(&conf->wait_barrier, |
| &w, TASK_IDLE); |
| if (!md_cluster_ops->area_resyncing(mddev, WRITE, |
| bio->bi_iter.bi_sector, |
| bio_end_sector(bio))) |
| break; |
| schedule(); |
| } |
| finish_wait(&conf->wait_barrier, &w); |
| } |
| |
| /* |
| * Register the new request and wait if the reconstruction |
| * thread has put up a bar for new requests. |
| * Continue immediately if no resync is active currently. |
| */ |
| if (!wait_barrier(conf, bio->bi_iter.bi_sector, |
| bio->bi_opf & REQ_NOWAIT)) { |
| bio_wouldblock_error(bio); |
| return; |
| } |
| |
| retry_write: |
| r1_bio = alloc_r1bio(mddev, bio); |
| r1_bio->sectors = max_write_sectors; |
| |
| /* first select target devices under rcu_lock and |
| * inc refcount on their rdev. Record them by setting |
| * bios[x] to bio |
| * If there are known/acknowledged bad blocks on any device on |
| * which we have seen a write error, we want to avoid writing those |
| * blocks. |
| * This potentially requires several writes to write around |
| * the bad blocks. Each set of writes gets it's own r1bio |
| * with a set of bios attached. |
| */ |
| |
| disks = conf->raid_disks * 2; |
| blocked_rdev = NULL; |
| max_sectors = r1_bio->sectors; |
| for (i = 0; i < disks; i++) { |
| struct md_rdev *rdev = conf->mirrors[i].rdev; |
| |
| /* |
| * The write-behind io is only attempted on drives marked as |
| * write-mostly, which means we could allocate write behind |
| * bio later. |
| */ |
| if (!is_discard && rdev && test_bit(WriteMostly, &rdev->flags)) |
| write_behind = true; |
| |
| if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) { |
| atomic_inc(&rdev->nr_pending); |
| blocked_rdev = rdev; |
| break; |
| } |
| r1_bio->bios[i] = NULL; |
| if (!rdev || test_bit(Faulty, &rdev->flags)) { |
| if (i < conf->raid_disks) |
| set_bit(R1BIO_Degraded, &r1_bio->state); |
| continue; |
| } |
| |
| atomic_inc(&rdev->nr_pending); |
| if (test_bit(WriteErrorSeen, &rdev->flags)) { |
| sector_t first_bad; |
| int bad_sectors; |
| int is_bad; |
| |
| is_bad = is_badblock(rdev, r1_bio->sector, max_sectors, |
| &first_bad, &bad_sectors); |
| if (is_bad < 0) { |
| /* mustn't write here until the bad block is |
| * acknowledged*/ |
| set_bit(BlockedBadBlocks, &rdev->flags); |
| blocked_rdev = rdev; |
| break; |
| } |
| if (is_bad && first_bad <= r1_bio->sector) { |
| /* Cannot write here at all */ |
| bad_sectors -= (r1_bio->sector - first_bad); |
| if (bad_sectors < max_sectors) |
| /* mustn't write more than bad_sectors |
| * to other devices yet |
| */ |
| max_sectors = bad_sectors; |
| rdev_dec_pending(rdev, mddev); |
| /* We don't set R1BIO_Degraded as that |
| * only applies if the disk is |
| * missing, so it might be re-added, |
| * and we want to know to recover this |
| * chunk. |
| * In this case the device is here, |
| * and the fact that this chunk is not |
| * in-sync is recorded in the bad |
| * block log |
| */ |
| continue; |
| } |
| if (is_bad) { |
| int good_sectors = first_bad - r1_bio->sector; |
| if (good_sectors < max_sectors) |
| max_sectors = good_sectors; |
| } |
| } |
| r1_bio->bios[i] = bio; |
| } |
| |
| if (unlikely(blocked_rdev)) { |
| /* Wait for this device to become unblocked */ |
| int j; |
| |
| for (j = 0; j < i; j++) |
| if (r1_bio->bios[j]) |
| rdev_dec_pending(conf->mirrors[j].rdev, mddev); |
| mempool_free(r1_bio, &conf->r1bio_pool); |
| allow_barrier(conf, bio->bi_iter.bi_sector); |
| |
| if (bio->bi_opf & REQ_NOWAIT) { |
| bio_wouldblock_error(bio); |
| return; |
| } |
| mddev_add_trace_msg(mddev, "raid1 wait rdev %d blocked", |
| blocked_rdev->raid_disk); |
| md_wait_for_blocked_rdev(blocked_rdev, mddev); |
| wait_barrier(conf, bio->bi_iter.bi_sector, false); |
| goto retry_write; |
| } |
| |
| /* |
| * When using a bitmap, we may call alloc_behind_master_bio below. |
| * alloc_behind_master_bio allocates a copy of the data payload a page |
| * at a time and thus needs a new bio that can fit the whole payload |
| * this bio in page sized chunks. |
| */ |
| if (write_behind && mddev->bitmap) |
| max_sectors = min_t(int, max_sectors, |
| BIO_MAX_VECS * (PAGE_SIZE >> 9)); |
| if (max_sectors < bio_sectors(bio)) { |
| struct bio *split = bio_split(bio, max_sectors, |
| GFP_NOIO, &conf->bio_split); |
| bio_chain(split, bio); |
| submit_bio_noacct(bio); |
| bio = split; |
| r1_bio->master_bio = bio; |
| r1_bio->sectors = max_sectors; |
| } |
| |
| md_account_bio(mddev, &bio); |
| r1_bio->master_bio = bio; |
| atomic_set(&r1_bio->remaining, 1); |
| atomic_set(&r1_bio->behind_remaining, 0); |
| |
| first_clone = 1; |
| |
| for (i = 0; i < disks; i++) { |
| struct bio *mbio = NULL; |
| struct md_rdev *rdev = conf->mirrors[i].rdev; |
| if (!r1_bio->bios[i]) |
| continue; |
| |
| if (first_clone) { |
| unsigned long max_write_behind = |
| mddev->bitmap_info.max_write_behind; |
| struct md_bitmap_stats stats; |
| int err; |
| |
| /* do behind I/O ? |
| * Not if there are too many, or cannot |
| * allocate memory, or a reader on WriteMostly |
| * is waiting for behind writes to flush */ |
| err = mddev->bitmap_ops->get_stats(mddev->bitmap, &stats); |
| if (!err && write_behind && !stats.behind_wait && |
| stats.behind_writes < max_write_behind) |
| alloc_behind_master_bio(r1_bio, bio); |
| |
| mddev->bitmap_ops->startwrite( |
| mddev, r1_bio->sector, r1_bio->sectors, |
| test_bit(R1BIO_BehindIO, &r1_bio->state)); |
| first_clone = 0; |
| } |
| |
| if (r1_bio->behind_master_bio) { |
| mbio = bio_alloc_clone(rdev->bdev, |
| r1_bio->behind_master_bio, |
| GFP_NOIO, &mddev->bio_set); |
| if (test_bit(CollisionCheck, &rdev->flags)) |
| wait_for_serialization(rdev, r1_bio); |
| if (test_bit(WriteMostly, &rdev->flags)) |
| atomic_inc(&r1_bio->behind_remaining); |
| } else { |
| mbio = bio_alloc_clone(rdev->bdev, bio, GFP_NOIO, |
| &mddev->bio_set); |
| |
| if (mddev->serialize_policy) |
| wait_for_serialization(rdev, r1_bio); |
| } |
| |
| r1_bio->bios[i] = mbio; |
| |
| mbio->bi_iter.bi_sector = (r1_bio->sector + rdev->data_offset); |
| mbio->bi_end_io = raid1_end_write_request; |
| mbio->bi_opf = bio_op(bio) | (bio->bi_opf & (REQ_SYNC | REQ_FUA)); |
| if (test_bit(FailFast, &rdev->flags) && |
| !test_bit(WriteMostly, &rdev->flags) && |
| conf->raid_disks - mddev->degraded > 1) |
| mbio->bi_opf |= MD_FAILFAST; |
| mbio->bi_private = r1_bio; |
| |
| atomic_inc(&r1_bio->remaining); |
| mddev_trace_remap(mddev, mbio, r1_bio->sector); |
| /* flush_pending_writes() needs access to the rdev so...*/ |
| mbio->bi_bdev = (void *)rdev; |
| if (!raid1_add_bio_to_plug(mddev, mbio, raid1_unplug, disks)) { |
| spin_lock_irqsave(&conf->device_lock, flags); |
| bio_list_add(&conf->pending_bio_list, mbio); |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| md_wakeup_thread(mddev->thread); |
| } |
| } |
| |
| r1_bio_write_done(r1_bio); |
| |
| /* In case raid1d snuck in to freeze_array */ |
| wake_up_barrier(conf); |
| } |
| |
| static bool raid1_make_request(struct mddev *mddev, struct bio *bio) |
| { |
| sector_t sectors; |
| |
| if (unlikely(bio->bi_opf & REQ_PREFLUSH) |
| && md_flush_request(mddev, bio)) |
| return true; |
| |
| /* |
| * There is a limit to the maximum size, but |
| * the read/write handler might find a lower limit |
| * due to bad blocks. To avoid multiple splits, |
| * we pass the maximum number of sectors down |
| * and let the lower level perform the split. |
| */ |
| sectors = align_to_barrier_unit_end( |
| bio->bi_iter.bi_sector, bio_sectors(bio)); |
| |
| if (bio_data_dir(bio) == READ) |
| raid1_read_request(mddev, bio, sectors, NULL); |
| else { |
| md_write_start(mddev,bio); |
| raid1_write_request(mddev, bio, sectors); |
| } |
| return true; |
| } |
| |
| static void raid1_status(struct seq_file *seq, struct mddev *mddev) |
| { |
| struct r1conf *conf = mddev->private; |
| int i; |
| |
| lockdep_assert_held(&mddev->lock); |
| |
| seq_printf(seq, " [%d/%d] [", conf->raid_disks, |
| conf->raid_disks - mddev->degraded); |
| for (i = 0; i < conf->raid_disks; i++) { |
| struct md_rdev *rdev = READ_ONCE(conf->mirrors[i].rdev); |
| |
| seq_printf(seq, "%s", |
| rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_"); |
| } |
| seq_printf(seq, "]"); |
| } |
| |
| /** |
| * raid1_error() - RAID1 error handler. |
| * @mddev: affected md device. |
| * @rdev: member device to fail. |
| * |
| * The routine acknowledges &rdev failure and determines new @mddev state. |
| * If it failed, then: |
| * - &MD_BROKEN flag is set in &mddev->flags. |
| * - recovery is disabled. |
| * Otherwise, it must be degraded: |
| * - recovery is interrupted. |
| * - &mddev->degraded is bumped. |
| * |
| * @rdev is marked as &Faulty excluding case when array is failed and |
| * &mddev->fail_last_dev is off. |
| */ |
| static void raid1_error(struct mddev *mddev, struct md_rdev *rdev) |
| { |
| struct r1conf *conf = mddev->private; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&conf->device_lock, flags); |
| |
| if (test_bit(In_sync, &rdev->flags) && |
| (conf->raid_disks - mddev->degraded) == 1) { |
| set_bit(MD_BROKEN, &mddev->flags); |
| |
| if (!mddev->fail_last_dev) { |
| conf->recovery_disabled = mddev->recovery_disabled; |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| return; |
| } |
| } |
| set_bit(Blocked, &rdev->flags); |
| if (test_and_clear_bit(In_sync, &rdev->flags)) |
| mddev->degraded++; |
| set_bit(Faulty, &rdev->flags); |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| /* |
| * if recovery is running, make sure it aborts. |
| */ |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); |
| set_mask_bits(&mddev->sb_flags, 0, |
| BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING)); |
| pr_crit("md/raid1:%s: Disk failure on %pg, disabling device.\n" |
| "md/raid1:%s: Operation continuing on %d devices.\n", |
| mdname(mddev), rdev->bdev, |
| mdname(mddev), conf->raid_disks - mddev->degraded); |
| } |
| |
| static void print_conf(struct r1conf *conf) |
| { |
| int i; |
| |
| pr_debug("RAID1 conf printout:\n"); |
| if (!conf) { |
| pr_debug("(!conf)\n"); |
| return; |
| } |
| pr_debug(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded, |
| conf->raid_disks); |
| |
| lockdep_assert_held(&conf->mddev->reconfig_mutex); |
| for (i = 0; i < conf->raid_disks; i++) { |
| struct md_rdev *rdev = conf->mirrors[i].rdev; |
| if (rdev) |
| pr_debug(" disk %d, wo:%d, o:%d, dev:%pg\n", |
| i, !test_bit(In_sync, &rdev->flags), |
| !test_bit(Faulty, &rdev->flags), |
| rdev->bdev); |
| } |
| } |
| |
| static void close_sync(struct r1conf *conf) |
| { |
| int idx; |
| |
| for (idx = 0; idx < BARRIER_BUCKETS_NR; idx++) { |
| _wait_barrier(conf, idx, false); |
| _allow_barrier(conf, idx); |
| } |
| |
| mempool_exit(&conf->r1buf_pool); |
| } |
| |
| static int raid1_spare_active(struct mddev *mddev) |
| { |
| int i; |
| struct r1conf *conf = mddev->private; |
| int count = 0; |
| unsigned long flags; |
| |
| /* |
| * Find all failed disks within the RAID1 configuration |
| * and mark them readable. |
| * Called under mddev lock, so rcu protection not needed. |
| * device_lock used to avoid races with raid1_end_read_request |
| * which expects 'In_sync' flags and ->degraded to be consistent. |
| */ |
| spin_lock_irqsave(&conf->device_lock, flags); |
| for (i = 0; i < conf->raid_disks; i++) { |
| struct md_rdev *rdev = conf->mirrors[i].rdev; |
| struct md_rdev *repl = conf->mirrors[conf->raid_disks + i].rdev; |
| if (repl |
| && !test_bit(Candidate, &repl->flags) |
| && repl->recovery_offset == MaxSector |
| && !test_bit(Faulty, &repl->flags) |
| && !test_and_set_bit(In_sync, &repl->flags)) { |
| /* replacement has just become active */ |
| if (!rdev || |
| !test_and_clear_bit(In_sync, &rdev->flags)) |
| count++; |
| if (rdev) { |
| /* Replaced device not technically |
| * faulty, but we need to be sure |
| * it gets removed and never re-added |
| */ |
| set_bit(Faulty, &rdev->flags); |
| sysfs_notify_dirent_safe( |
| rdev->sysfs_state); |
| } |
| } |
| if (rdev |
| && rdev->recovery_offset == MaxSector |
| && !test_bit(Faulty, &rdev->flags) |
| && !test_and_set_bit(In_sync, &rdev->flags)) { |
| count++; |
| sysfs_notify_dirent_safe(rdev->sysfs_state); |
| } |
| } |
| mddev->degraded -= count; |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| |
| print_conf(conf); |
| return count; |
| } |
| |
| static bool raid1_add_conf(struct r1conf *conf, struct md_rdev *rdev, int disk, |
| bool replacement) |
| { |
| struct raid1_info *info = conf->mirrors + disk; |
| |
| if (replacement) |
| info += conf->raid_disks; |
| |
| if (info->rdev) |
| return false; |
| |
| if (bdev_nonrot(rdev->bdev)) { |
| set_bit(Nonrot, &rdev->flags); |
| WRITE_ONCE(conf->nonrot_disks, conf->nonrot_disks + 1); |
| } |
| |
| rdev->raid_disk = disk; |
| info->head_position = 0; |
| info->seq_start = MaxSector; |
| WRITE_ONCE(info->rdev, rdev); |
| |
| return true; |
| } |
| |
| static bool raid1_remove_conf(struct r1conf *conf, int disk) |
| { |
| struct raid1_info *info = conf->mirrors + disk; |
| struct md_rdev *rdev = info->rdev; |
| |
| if (!rdev || test_bit(In_sync, &rdev->flags) || |
| atomic_read(&rdev->nr_pending)) |
| return false; |
| |
| /* Only remove non-faulty devices if recovery is not possible. */ |
| if (!test_bit(Faulty, &rdev->flags) && |
| rdev->mddev->recovery_disabled != conf->recovery_disabled && |
| rdev->mddev->degraded < conf->raid_disks) |
| return false; |
| |
| if (test_and_clear_bit(Nonrot, &rdev->flags)) |
| WRITE_ONCE(conf->nonrot_disks, conf->nonrot_disks - 1); |
| |
| WRITE_ONCE(info->rdev, NULL); |
| return true; |
| } |
| |
| static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev) |
| { |
| struct r1conf *conf = mddev->private; |
| int err = -EEXIST; |
| int mirror = 0, repl_slot = -1; |
| struct raid1_info *p; |
| int first = 0; |
| int last = conf->raid_disks - 1; |
| |
| if (mddev->recovery_disabled == conf->recovery_disabled) |
| return -EBUSY; |
| |
| if (rdev->raid_disk >= 0) |
| first = last = rdev->raid_disk; |
| |
| /* |
| * find the disk ... but prefer rdev->saved_raid_disk |
| * if possible. |
| */ |
| if (rdev->saved_raid_disk >= 0 && |
| rdev->saved_raid_disk >= first && |
| rdev->saved_raid_disk < conf->raid_disks && |
| conf->mirrors[rdev->saved_raid_disk].rdev == NULL) |
| first = last = rdev->saved_raid_disk; |
| |
| for (mirror = first; mirror <= last; mirror++) { |
| p = conf->mirrors + mirror; |
| if (!p->rdev) { |
| err = mddev_stack_new_rdev(mddev, rdev); |
| if (err) |
| return err; |
| |
| raid1_add_conf(conf, rdev, mirror, false); |
| /* As all devices are equivalent, we don't need a full recovery |
| * if this was recently any drive of the array |
| */ |
| if (rdev->saved_raid_disk < 0) |
| conf->fullsync = 1; |
| break; |
| } |
| if (test_bit(WantReplacement, &p->rdev->flags) && |
| p[conf->raid_disks].rdev == NULL && repl_slot < 0) |
| repl_slot = mirror; |
| } |
| |
| if (err && repl_slot >= 0) { |
| /* Add this device as a replacement */ |
| clear_bit(In_sync, &rdev->flags); |
| set_bit(Replacement, &rdev->flags); |
| raid1_add_conf(conf, rdev, repl_slot, true); |
| err = 0; |
| conf->fullsync = 1; |
| } |
| |
| print_conf(conf); |
| return err; |
| } |
| |
| static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev) |
| { |
| struct r1conf *conf = mddev->private; |
| int err = 0; |
| int number = rdev->raid_disk; |
| struct raid1_info *p = conf->mirrors + number; |
| |
| if (unlikely(number >= conf->raid_disks)) |
| goto abort; |
| |
| if (rdev != p->rdev) { |
| number += conf->raid_disks; |
| p = conf->mirrors + number; |
| } |
| |
| print_conf(conf); |
| if (rdev == p->rdev) { |
| if (!raid1_remove_conf(conf, number)) { |
| err = -EBUSY; |
| goto abort; |
| } |
| |
| if (number < conf->raid_disks && |
| conf->mirrors[conf->raid_disks + number].rdev) { |
| /* We just removed a device that is being replaced. |
| * Move down the replacement. We drain all IO before |
| * doing this to avoid confusion. |
| */ |
| struct md_rdev *repl = |
| conf->mirrors[conf->raid_disks + number].rdev; |
| freeze_array(conf, 0); |
| if (atomic_read(&repl->nr_pending)) { |
| /* It means that some queued IO of retry_list |
| * hold repl. Thus, we cannot set replacement |
| * as NULL, avoiding rdev NULL pointer |
| * dereference in sync_request_write and |
| * handle_write_finished. |
| */ |
| err = -EBUSY; |
| unfreeze_array(conf); |
| goto abort; |
| } |
| clear_bit(Replacement, &repl->flags); |
| WRITE_ONCE(p->rdev, repl); |
| conf->mirrors[conf->raid_disks + number].rdev = NULL; |
| unfreeze_array(conf); |
| } |
| |
| clear_bit(WantReplacement, &rdev->flags); |
| err = md_integrity_register(mddev); |
| } |
| abort: |
| |
| print_conf(conf); |
| return err; |
| } |
| |
| static void end_sync_read(struct bio *bio) |
| { |
| struct r1bio *r1_bio = get_resync_r1bio(bio); |
| |
| update_head_pos(r1_bio->read_disk, r1_bio); |
| |
| /* |
| * we have read a block, now it needs to be re-written, |
| * or re-read if the read failed. |
| * We don't do much here, just schedule handling by raid1d |
| */ |
| if (!bio->bi_status) |
| set_bit(R1BIO_Uptodate, &r1_bio->state); |
| |
| if (atomic_dec_and_test(&r1_bio->remaining)) |
| reschedule_retry(r1_bio); |
| } |
| |
| static void abort_sync_write(struct mddev *mddev, struct r1bio *r1_bio) |
| { |
| sector_t sync_blocks = 0; |
| sector_t s = r1_bio->sector; |
| long sectors_to_go = r1_bio->sectors; |
| |
| /* make sure these bits don't get cleared. */ |
| do { |
| mddev->bitmap_ops->end_sync(mddev, s, &sync_blocks); |
| s += sync_blocks; |
| sectors_to_go -= sync_blocks; |
| } while (sectors_to_go > 0); |
| } |
| |
| static void put_sync_write_buf(struct r1bio *r1_bio, int uptodate) |
| { |
| if (atomic_dec_and_test(&r1_bio->remaining)) { |
| struct mddev *mddev = r1_bio->mddev; |
| int s = r1_bio->sectors; |
| |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state) || |
| test_bit(R1BIO_WriteError, &r1_bio->state)) |
| reschedule_retry(r1_bio); |
| else { |
| put_buf(r1_bio); |
| md_done_sync(mddev, s, uptodate); |
| } |
| } |
| } |
| |
| static void end_sync_write(struct bio *bio) |
| { |
| int uptodate = !bio->bi_status; |
| struct r1bio *r1_bio = get_resync_r1bio(bio); |
| struct mddev *mddev = r1_bio->mddev; |
| struct r1conf *conf = mddev->private; |
| struct md_rdev *rdev = conf->mirrors[find_bio_disk(r1_bio, bio)].rdev; |
| |
| if (!uptodate) { |
| abort_sync_write(mddev, r1_bio); |
| set_bit(WriteErrorSeen, &rdev->flags); |
| if (!test_and_set_bit(WantReplacement, &rdev->flags)) |
| set_bit(MD_RECOVERY_NEEDED, & |
| mddev->recovery); |
| set_bit(R1BIO_WriteError, &r1_bio->state); |
| } else if (rdev_has_badblock(rdev, r1_bio->sector, r1_bio->sectors) && |
| !rdev_has_badblock(conf->mirrors[r1_bio->read_disk].rdev, |
| r1_bio->sector, r1_bio->sectors)) { |
| set_bit(R1BIO_MadeGood, &r1_bio->state); |
| } |
| |
| put_sync_write_buf(r1_bio, uptodate); |
| } |
| |
| static int r1_sync_page_io(struct md_rdev *rdev, sector_t sector, |
| int sectors, struct page *page, blk_opf_t rw) |
| { |
| if (sync_page_io(rdev, sector, sectors << 9, page, rw, false)) |
| /* success */ |
| return 1; |
| if (rw == REQ_OP_WRITE) { |
| set_bit(WriteErrorSeen, &rdev->flags); |
| if (!test_and_set_bit(WantReplacement, |
| &rdev->flags)) |
| set_bit(MD_RECOVERY_NEEDED, & |
| rdev->mddev->recovery); |
| } |
| /* need to record an error - either for the block or the device */ |
| if (!rdev_set_badblocks(rdev, sector, sectors, 0)) |
| md_error(rdev->mddev, rdev); |
| return 0; |
| } |
| |
| static int fix_sync_read_error(struct r1bio *r1_bio) |
| { |
| /* Try some synchronous reads of other devices to get |
| * good data, much like with normal read errors. Only |
| * read into the pages we already have so we don't |
| * need to re-issue the read request. |
| * We don't need to freeze the array, because being in an |
| * active sync request, there is no normal IO, and |
| * no overlapping syncs. |
| * We don't need to check is_badblock() again as we |
| * made sure that anything with a bad block in range |
| * will have bi_end_io clear. |
| */ |
| struct mddev *mddev = r1_bio->mddev; |
| struct r1conf *conf = mddev->private; |
| struct bio *bio = r1_bio->bios[r1_bio->read_disk]; |
| struct page **pages = get_resync_pages(bio)->pages; |
| sector_t sect = r1_bio->sector; |
| int sectors = r1_bio->sectors; |
| int idx = 0; |
| struct md_rdev *rdev; |
| |
| rdev = conf->mirrors[r1_bio->read_disk].rdev; |
| if (test_bit(FailFast, &rdev->flags)) { |
| /* Don't try recovering from here - just fail it |
| * ... unless it is the last working device of course */ |
| md_error(mddev, rdev); |
| if (test_bit(Faulty, &rdev->flags)) |
| /* Don't try to read from here, but make sure |
| * put_buf does it's thing |
| */ |
| bio->bi_end_io = end_sync_write; |
| } |
| |
| while(sectors) { |
| int s = sectors; |
| int d = r1_bio->read_disk; |
| int success = 0; |
| int start; |
| |
| if (s > (PAGE_SIZE>>9)) |
| s = PAGE_SIZE >> 9; |
| do { |
| if (r1_bio->bios[d]->bi_end_io == end_sync_read) { |
| /* No rcu protection needed here devices |
| * can only be removed when no resync is |
| * active, and resync is currently active |
| */ |
| rdev = conf->mirrors[d].rdev; |
| if (sync_page_io(rdev, sect, s<<9, |
| pages[idx], |
| REQ_OP_READ, false)) { |
| success = 1; |
| break; |
| } |
| } |
| d++; |
| if (d == conf->raid_disks * 2) |
| d = 0; |
| } while (!success && d != r1_bio->read_disk); |
| |
| if (!success) { |
| int abort = 0; |
| /* Cannot read from anywhere, this block is lost. |
| * Record a bad block on each device. If that doesn't |
| * work just disable and interrupt the recovery. |
| * Don't fail devices as that won't really help. |
| */ |
| pr_crit_ratelimited("md/raid1:%s: %pg: unrecoverable I/O read error for block %llu\n", |
| mdname(mddev), bio->bi_bdev, |
| (unsigned long long)r1_bio->sector); |
| for (d = 0; d < conf->raid_disks * 2; d++) { |
| rdev = conf->mirrors[d].rdev; |
| if (!rdev || test_bit(Faulty, &rdev->flags)) |
| continue; |
| if (!rdev_set_badblocks(rdev, sect, s, 0)) |
| abort = 1; |
| } |
| if (abort) { |
| conf->recovery_disabled = |
| mddev->recovery_disabled; |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); |
| md_done_sync(mddev, r1_bio->sectors, 0); |
| put_buf(r1_bio); |
| return 0; |
| } |
| /* Try next page */ |
| sectors -= s; |
| sect += s; |
| idx++; |
| continue; |
| } |
| |
| start = d; |
| /* write it back and re-read */ |
| while (d != r1_bio->read_disk) { |
| if (d == 0) |
| d = conf->raid_disks * 2; |
| d--; |
| if (r1_bio->bios[d]->bi_end_io != end_sync_read) |
| continue; |
| rdev = conf->mirrors[d].rdev; |
| if (r1_sync_page_io(rdev, sect, s, |
| pages[idx], |
| REQ_OP_WRITE) == 0) { |
| r1_bio->bios[d]->bi_end_io = NULL; |
| rdev_dec_pending(rdev, mddev); |
| } |
| } |
| d = start; |
| while (d != r1_bio->read_disk) { |
| if (d == 0) |
| d = conf->raid_disks * 2; |
| d--; |
| if (r1_bio->bios[d]->bi_end_io != end_sync_read) |
| continue; |
| rdev = conf->mirrors[d].rdev; |
| if (r1_sync_page_io(rdev, sect, s, |
| pages[idx], |
| REQ_OP_READ) != 0) |
| atomic_add(s, &rdev->corrected_errors); |
| } |
| sectors -= s; |
| sect += s; |
| idx ++; |
| } |
| set_bit(R1BIO_Uptodate, &r1_bio->state); |
| bio->bi_status = 0; |
| return 1; |
| } |
| |
| static void process_checks(struct r1bio *r1_bio) |
| { |
| /* We have read all readable devices. If we haven't |
| * got the block, then there is no hope left. |
| * If we have, then we want to do a comparison |
| * and skip the write if everything is the same. |
| * If any blocks failed to read, then we need to |
| * attempt an over-write |
| */ |
| struct mddev *mddev = r1_bio->mddev; |
| struct r1conf *conf = mddev->private; |
| int primary; |
| int i; |
| int vcnt; |
| |
| /* Fix variable parts of all bios */ |
| vcnt = (r1_bio->sectors + PAGE_SIZE / 512 - 1) >> (PAGE_SHIFT - 9); |
| for (i = 0; i < conf->raid_disks * 2; i++) { |
| blk_status_t status; |
| struct bio *b = r1_bio->bios[i]; |
| struct resync_pages *rp = get_resync_pages(b); |
| if (b->bi_end_io != end_sync_read) |
| continue; |
| /* fixup the bio for reuse, but preserve errno */ |
| status = b->bi_status; |
| bio_reset(b, conf->mirrors[i].rdev->bdev, REQ_OP_READ); |
| b->bi_status = status; |
| b->bi_iter.bi_sector = r1_bio->sector + |
| conf->mirrors[i].rdev->data_offset; |
| b->bi_end_io = end_sync_read; |
| rp->raid_bio = r1_bio; |
| b->bi_private = rp; |
| |
| /* initialize bvec table again */ |
| md_bio_reset_resync_pages(b, rp, r1_bio->sectors << 9); |
| } |
| for (primary = 0; primary < conf->raid_disks * 2; primary++) |
| if (r1_bio->bios[primary]->bi_end_io == end_sync_read && |
| !r1_bio->bios[primary]->bi_status) { |
| r1_bio->bios[primary]->bi_end_io = NULL; |
| rdev_dec_pending(conf->mirrors[primary].rdev, mddev); |
| break; |
| } |
| r1_bio->read_disk = primary; |
| for (i = 0; i < conf->raid_disks * 2; i++) { |
| int j = 0; |
| struct bio *pbio = r1_bio->bios[primary]; |
| struct bio *sbio = r1_bio->bios[i]; |
| blk_status_t status = sbio->bi_status; |
| struct page **ppages = get_resync_pages(pbio)->pages; |
| struct page **spages = get_resync_pages(sbio)->pages; |
| struct bio_vec *bi; |
| int page_len[RESYNC_PAGES] = { 0 }; |
| struct bvec_iter_all iter_all; |
| |
| if (sbio->bi_end_io != end_sync_read) |
| continue; |
| /* Now we can 'fixup' the error value */ |
| sbio->bi_status = 0; |
| |
| bio_for_each_segment_all(bi, sbio, iter_all) |
| page_len[j++] = bi->bv_len; |
| |
| if (!status) { |
| for (j = vcnt; j-- ; ) { |
| if (memcmp(page_address(ppages[j]), |
| page_address(spages[j]), |
| page_len[j])) |
| break; |
| } |
| } else |
| j = 0; |
| if (j >= 0) |
| atomic64_add(r1_bio->sectors, &mddev->resync_mismatches); |
| if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery) |
| && !status)) { |
| /* No need to write to this device. */ |
| sbio->bi_end_io = NULL; |
| rdev_dec_pending(conf->mirrors[i].rdev, mddev); |
| continue; |
| } |
| |
| bio_copy_data(sbio, pbio); |
| } |
| } |
| |
| static void sync_request_write(struct mddev *mddev, struct r1bio *r1_bio) |
| { |
| struct r1conf *conf = mddev->private; |
| int i; |
| int disks = conf->raid_disks * 2; |
| struct bio *wbio; |
| |
| if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) |
| /* ouch - failed to read all of that. */ |
| if (!fix_sync_read_error(r1_bio)) |
| return; |
| |
| if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) |
| process_checks(r1_bio); |
| |
| /* |
| * schedule writes |
| */ |
| atomic_set(&r1_bio->remaining, 1); |
| for (i = 0; i < disks ; i++) { |
| wbio = r1_bio->bios[i]; |
| if (wbio->bi_end_io == NULL || |
| (wbio->bi_end_io == end_sync_read && |
| (i == r1_bio->read_disk || |
| !test_bit(MD_RECOVERY_SYNC, &mddev->recovery)))) |
| continue; |
| if (test_bit(Faulty, &conf->mirrors[i].rdev->flags)) { |
| abort_sync_write(mddev, r1_bio); |
| continue; |
| } |
| |
| wbio->bi_opf = REQ_OP_WRITE; |
| if (test_bit(FailFast, &conf->mirrors[i].rdev->flags)) |
| wbio->bi_opf |= MD_FAILFAST; |
| |
| wbio->bi_end_io = end_sync_write; |
| atomic_inc(&r1_bio->remaining); |
| md_sync_acct(conf->mirrors[i].rdev->bdev, bio_sectors(wbio)); |
| |
| submit_bio_noacct(wbio); |
| } |
| |
| put_sync_write_buf(r1_bio, 1); |
| } |
| |
| /* |
| * This is a kernel thread which: |
| * |
| * 1. Retries failed read operations on working mirrors. |
| * 2. Updates the raid superblock when problems encounter. |
| * 3. Performs writes following reads for array synchronising. |
| */ |
| |
| static void fix_read_error(struct r1conf *conf, struct r1bio *r1_bio) |
| { |
| sector_t sect = r1_bio->sector; |
| int sectors = r1_bio->sectors; |
| int read_disk = r1_bio->read_disk; |
| struct mddev *mddev = conf->mddev; |
| struct md_rdev *rdev = conf->mirrors[read_disk].rdev; |
| |
| if (exceed_read_errors(mddev, rdev)) { |
| r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED; |
| return; |
| } |
| |
| while(sectors) { |
| int s = sectors; |
| int d = read_disk; |
| int success = 0; |
| int start; |
| |
| if (s > (PAGE_SIZE>>9)) |
| s = PAGE_SIZE >> 9; |
| |
| do { |
| rdev = conf->mirrors[d].rdev; |
| if (rdev && |
| (test_bit(In_sync, &rdev->flags) || |
| (!test_bit(Faulty, &rdev->flags) && |
| rdev->recovery_offset >= sect + s)) && |
| rdev_has_badblock(rdev, sect, s) == 0) { |
| atomic_inc(&rdev->nr_pending); |
| if (sync_page_io(rdev, sect, s<<9, |
| conf->tmppage, REQ_OP_READ, false)) |
| success = 1; |
| rdev_dec_pending(rdev, mddev); |
| if (success) |
| break; |
| } |
| |
| d++; |
| if (d == conf->raid_disks * 2) |
| d = 0; |
| } while (d != read_disk); |
| |
| if (!success) { |
| /* Cannot read from anywhere - mark it bad */ |
| struct md_rdev *rdev = conf->mirrors[read_disk].rdev; |
| if (!rdev_set_badblocks(rdev, sect, s, 0)) |
| md_error(mddev, rdev); |
| break; |
| } |
| /* write it back and re-read */ |
| start = d; |
| while (d != read_disk) { |
| if (d==0) |
| d = conf->raid_disks * 2; |
| d--; |
| rdev = conf->mirrors[d].rdev; |
| if (rdev && |
| !test_bit(Faulty, &rdev->flags)) { |
| atomic_inc(&rdev->nr_pending); |
| r1_sync_page_io(rdev, sect, s, |
| conf->tmppage, REQ_OP_WRITE); |
| rdev_dec_pending(rdev, mddev); |
| } |
| } |
| d = start; |
| while (d != read_disk) { |
| if (d==0) |
| d = conf->raid_disks * 2; |
| d--; |
| rdev = conf->mirrors[d].rdev; |
| if (rdev && |
| !test_bit(Faulty, &rdev->flags)) { |
| atomic_inc(&rdev->nr_pending); |
| if (r1_sync_page_io(rdev, sect, s, |
| conf->tmppage, REQ_OP_READ)) { |
| atomic_add(s, &rdev->corrected_errors); |
| pr_info("md/raid1:%s: read error corrected (%d sectors at %llu on %pg)\n", |
| mdname(mddev), s, |
| (unsigned long long)(sect + |
| rdev->data_offset), |
| rdev->bdev); |
| } |
| rdev_dec_pending(rdev, mddev); |
| } |
| } |
| sectors -= s; |
| sect += s; |
| } |
| } |
| |
| static int narrow_write_error(struct r1bio *r1_bio, int i) |
| { |
| struct mddev *mddev = r1_bio->mddev; |
| struct r1conf *conf = mddev->private; |
| struct md_rdev *rdev = conf->mirrors[i].rdev; |
| |
| /* bio has the data to be written to device 'i' where |
| * we just recently had a write error. |
| * We repeatedly clone the bio and trim down to one block, |
| * then try the write. Where the write fails we record |
| * a bad block. |
| * It is conceivable that the bio doesn't exactly align with |
| * blocks. We must handle this somehow. |
| * |
| * We currently own a reference on the rdev. |
| */ |
| |
| int block_sectors; |
| sector_t sector; |
| int sectors; |
| int sect_to_write = r1_bio->sectors; |
| int ok = 1; |
| |
| if (rdev->badblocks.shift < 0) |
| return 0; |
| |
| block_sectors = roundup(1 << rdev->badblocks.shift, |
| bdev_logical_block_size(rdev->bdev) >> 9); |
| sector = r1_bio->sector; |
| sectors = ((sector + block_sectors) |
| & ~(sector_t)(block_sectors - 1)) |
| - sector; |
| |
| while (sect_to_write) { |
| struct bio *wbio; |
| if (sectors > sect_to_write) |
| sectors = sect_to_write; |
| /* Write at 'sector' for 'sectors'*/ |
| |
| if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { |
| wbio = bio_alloc_clone(rdev->bdev, |
| r1_bio->behind_master_bio, |
| GFP_NOIO, &mddev->bio_set); |
| } else { |
| wbio = bio_alloc_clone(rdev->bdev, r1_bio->master_bio, |
| GFP_NOIO, &mddev->bio_set); |
| } |
| |
| wbio->bi_opf = REQ_OP_WRITE; |
| wbio->bi_iter.bi_sector = r1_bio->sector; |
| wbio->bi_iter.bi_size = r1_bio->sectors << 9; |
| |
| bio_trim(wbio, sector - r1_bio->sector, sectors); |
| wbio->bi_iter.bi_sector += rdev->data_offset; |
| |
| if (submit_bio_wait(wbio) < 0) |
| /* failure! */ |
| ok = rdev_set_badblocks(rdev, sector, |
| sectors, 0) |
| && ok; |
| |
| bio_put(wbio); |
| sect_to_write -= sectors; |
| sector += sectors; |
| sectors = block_sectors; |
| } |
| return ok; |
| } |
| |
| static void handle_sync_write_finished(struct r1conf *conf, struct r1bio *r1_bio) |
| { |
| int m; |
| int s = r1_bio->sectors; |
| for (m = 0; m < conf->raid_disks * 2 ; m++) { |
| struct md_rdev *rdev = conf->mirrors[m].rdev; |
| struct bio *bio = r1_bio->bios[m]; |
| if (bio->bi_end_io == NULL) |
| continue; |
| if (!bio->bi_status && |
| test_bit(R1BIO_MadeGood, &r1_bio->state)) { |
| rdev_clear_badblocks(rdev, r1_bio->sector, s, 0); |
| } |
| if (bio->bi_status && |
| test_bit(R1BIO_WriteError, &r1_bio->state)) { |
| if (!rdev_set_badblocks(rdev, r1_bio->sector, s, 0)) |
| md_error(conf->mddev, rdev); |
| } |
| } |
| put_buf(r1_bio); |
| md_done_sync(conf->mddev, s, 1); |
| } |
| |
| static void handle_write_finished(struct r1conf *conf, struct r1bio *r1_bio) |
| { |
| int m, idx; |
| bool fail = false; |
| |
| for (m = 0; m < conf->raid_disks * 2 ; m++) |
| if (r1_bio->bios[m] == IO_MADE_GOOD) { |
| struct md_rdev *rdev = conf->mirrors[m].rdev; |
| rdev_clear_badblocks(rdev, |
| r1_bio->sector, |
| r1_bio->sectors, 0); |
| rdev_dec_pending(rdev, conf->mddev); |
| } else if (r1_bio->bios[m] != NULL) { |
| /* This drive got a write error. We need to |
| * narrow down and record precise write |
| * errors. |
| */ |
| fail = true; |
| if (!narrow_write_error(r1_bio, m)) { |
| md_error(conf->mddev, |
| conf->mirrors[m].rdev); |
| /* an I/O failed, we can't clear the bitmap */ |
| set_bit(R1BIO_Degraded, &r1_bio->state); |
| } |
| rdev_dec_pending(conf->mirrors[m].rdev, |
| conf->mddev); |
| } |
| if (fail) { |
| spin_lock_irq(&conf->device_lock); |
| list_add(&r1_bio->retry_list, &conf->bio_end_io_list); |
| idx = sector_to_idx(r1_bio->sector); |
| atomic_inc(&conf->nr_queued[idx]); |
| spin_unlock_irq(&conf->device_lock); |
| /* |
| * In case freeze_array() is waiting for condition |
| * get_unqueued_pending() == extra to be true. |
| */ |
| wake_up(&conf->wait_barrier); |
| md_wakeup_thread(conf->mddev->thread); |
| } else { |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) |
| close_write(r1_bio); |
| raid_end_bio_io(r1_bio); |
| } |
| } |
| |
| static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) |
| { |
| struct mddev *mddev = conf->mddev; |
| struct bio *bio; |
| struct md_rdev *rdev; |
| sector_t sector; |
| |
| clear_bit(R1BIO_ReadError, &r1_bio->state); |
| /* we got a read error. Maybe the drive is bad. Maybe just |
| * the block and we can fix it. |
| * We freeze all other IO, and try reading the block from |
| * other devices. When we find one, we re-write |
| * and check it that fixes the read error. |
| * This is all done synchronously while the array is |
| * frozen |
| */ |
| |
| bio = r1_bio->bios[r1_bio->read_disk]; |
| bio_put(bio); |
| r1_bio->bios[r1_bio->read_disk] = NULL; |
| |
| rdev = conf->mirrors[r1_bio->read_disk].rdev; |
| if (mddev->ro == 0 |
| && !test_bit(FailFast, &rdev->flags)) { |
| freeze_array(conf, 1); |
| fix_read_error(conf, r1_bio); |
| unfreeze_array(conf); |
| } else if (mddev->ro == 0 && test_bit(FailFast, &rdev->flags)) { |
| md_error(mddev, rdev); |
| } else { |
| r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED; |
| } |
| |
| rdev_dec_pending(rdev, conf->mddev); |
| sector = r1_bio->sector; |
| bio = r1_bio->master_bio; |
| |
| /* Reuse the old r1_bio so that the IO_BLOCKED settings are preserved */ |
| r1_bio->state = 0; |
| raid1_read_request(mddev, bio, r1_bio->sectors, r1_bio); |
| allow_barrier(conf, sector); |
| } |
| |
| static void raid1d(struct md_thread *thread) |
| { |
| struct mddev *mddev = thread->mddev; |
| struct r1bio *r1_bio; |
| unsigned long flags; |
| struct r1conf *conf = mddev->private; |
| struct list_head *head = &conf->retry_list; |
| struct blk_plug plug; |
| int idx; |
| |
| md_check_recovery(mddev); |
| |
| if (!list_empty_careful(&conf->bio_end_io_list) && |
| !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) { |
| LIST_HEAD(tmp); |
| spin_lock_irqsave(&conf->device_lock, flags); |
| if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) |
| list_splice_init(&conf->bio_end_io_list, &tmp); |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| while (!list_empty(&tmp)) { |
| r1_bio = list_first_entry(&tmp, struct r1bio, |
| retry_list); |
| list_del(&r1_bio->retry_list); |
| idx = sector_to_idx(r1_bio->sector); |
| atomic_dec(&conf->nr_queued[idx]); |
| if (mddev->degraded) |
| set_bit(R1BIO_Degraded, &r1_bio->state); |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) |
| close_write(r1_bio); |
| raid_end_bio_io(r1_bio); |
| } |
| } |
| |
| blk_start_plug(&plug); |
| for (;;) { |
| |
| flush_pending_writes(conf); |
| |
| spin_lock_irqsave(&conf->device_lock, flags); |
| if (list_empty(head)) { |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| break; |
| } |
| r1_bio = list_entry(head->prev, struct r1bio, retry_list); |
| list_del(head->prev); |
| idx = sector_to_idx(r1_bio->sector); |
| atomic_dec(&conf->nr_queued[idx]); |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| |
| mddev = r1_bio->mddev; |
| conf = mddev->private; |
| if (test_bit(R1BIO_IsSync, &r1_bio->state)) { |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state) || |
| test_bit(R1BIO_WriteError, &r1_bio->state)) |
| handle_sync_write_finished(conf, r1_bio); |
| else |
| sync_request_write(mddev, r1_bio); |
| } else if (test_bit(R1BIO_MadeGood, &r1_bio->state) || |
| test_bit(R1BIO_WriteError, &r1_bio->state)) |
| handle_write_finished(conf, r1_bio); |
| else if (test_bit(R1BIO_ReadError, &r1_bio->state)) |
| handle_read_error(conf, r1_bio); |
| else |
| WARN_ON_ONCE(1); |
| |
| cond_resched(); |
| if (mddev->sb_flags & ~(1<<MD_SB_CHANGE_PENDING)) |
| md_check_recovery(mddev); |
| } |
| blk_finish_plug(&plug); |
| } |
| |
| static int init_resync(struct r1conf *conf) |
| { |
| int buffs; |
| |
| buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE; |
| BUG_ON(mempool_initialized(&conf->r1buf_pool)); |
| |
| return mempool_init(&conf->r1buf_pool, buffs, r1buf_pool_alloc, |
| r1buf_pool_free, conf->poolinfo); |
| } |
| |
| static struct r1bio *raid1_alloc_init_r1buf(struct r1conf *conf) |
| { |
| struct r1bio *r1bio = mempool_alloc(&conf->r1buf_pool, GFP_NOIO); |
| struct resync_pages *rps; |
| struct bio *bio; |
| int i; |
| |
| for (i = conf->poolinfo->raid_disks; i--; ) { |
| bio = r1bio->bios[i]; |
| rps = bio->bi_private; |
| bio_reset(bio, NULL, 0); |
| bio->bi_private = rps; |
| } |
| r1bio->master_bio = NULL; |
| return r1bio; |
| } |
| |
| /* |
| * perform a "sync" on one "block" |
| * |
| * We need to make sure that no normal I/O request - particularly write |
| * requests - conflict with active sync requests. |
| * |
| * This is achieved by tracking pending requests and a 'barrier' concept |
| * that can be installed to exclude normal IO requests. |
| */ |
| |
| static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr, |
| sector_t max_sector, int *skipped) |
| { |
| struct r1conf *conf = mddev->private; |
| struct r1bio *r1_bio; |
| struct bio *bio; |
| sector_t nr_sectors; |
| int disk = -1; |
| int i; |
| int wonly = -1; |
| int write_targets = 0, read_targets = 0; |
| sector_t sync_blocks; |
| bool still_degraded = false; |
| int good_sectors = RESYNC_SECTORS; |
| int min_bad = 0; /* number of sectors that are bad in all devices */ |
| int idx = sector_to_idx(sector_nr); |
| int page_idx = 0; |
| |
| if (!mempool_initialized(&conf->r1buf_pool)) |
| if (init_resync(conf)) |
| return 0; |
| |
| if (sector_nr >= max_sector) { |
| /* If we aborted, we need to abort the |
| * sync on the 'current' bitmap chunk (there will |
| * only be one in raid1 resync. |
| * We can find the current addess in mddev->curr_resync |
| */ |
| if (mddev->curr_resync < max_sector) /* aborted */ |
| mddev->bitmap_ops->end_sync(mddev, mddev->curr_resync, |
| &sync_blocks); |
| else /* completed sync */ |
| conf->fullsync = 0; |
| |
| mddev->bitmap_ops->close_sync(mddev); |
| close_sync(conf); |
| |
| if (mddev_is_clustered(mddev)) { |
| conf->cluster_sync_low = 0; |
| conf->cluster_sync_high = 0; |
| } |
| return 0; |
| } |
| |
| if (mddev->bitmap == NULL && |
| mddev->recovery_cp == MaxSector && |
| !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) && |
| conf->fullsync == 0) { |
| *skipped = 1; |
| return max_sector - sector_nr; |
| } |
| /* before building a request, check if we can skip these blocks.. |
| * This call the bitmap_start_sync doesn't actually record anything |
| */ |
| if (!mddev->bitmap_ops->start_sync(mddev, sector_nr, &sync_blocks, true) && |
| !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { |
| /* We can skip this block, and probably several more */ |
| *skipped = 1; |
| return sync_blocks; |
| } |
| |
| /* |
| * If there is non-resync activity waiting for a turn, then let it |
| * though before starting on this new sync request. |
| */ |
| if (atomic_read(&conf->nr_waiting[idx])) |
| schedule_timeout_uninterruptible(1); |
| |
| /* we are incrementing sector_nr below. To be safe, we check against |
| * sector_nr + two times RESYNC_SECTORS |
| */ |
| |
| mddev->bitmap_ops->cond_end_sync(mddev, sector_nr, |
| mddev_is_clustered(mddev) && |
| (sector_nr + 2 * RESYNC_SECTORS > conf->cluster_sync_high)); |
| |
| if (raise_barrier(conf, sector_nr)) |
| return 0; |
| |
| r1_bio = raid1_alloc_init_r1buf(conf); |
| |
| /* |
| * If we get a correctably read error during resync or recovery, |
| * we might want to read from a different device. So we |
| * flag all drives that could conceivably be read from for READ, |
| * and any others (which will be non-In_sync devices) for WRITE. |
| * If a read fails, we try reading from something else for which READ |
| * is OK. |
| */ |
| |
| r1_bio->mddev = mddev; |
| r1_bio->sector = sector_nr; |
| r1_bio->state = 0; |
| set_bit(R1BIO_IsSync, &r1_bio->state); |
| /* make sure good_sectors won't go across barrier unit boundary */ |
| good_sectors = align_to_barrier_unit_end(sector_nr, good_sectors); |
| |
| for (i = 0; i < conf->raid_disks * 2; i++) { |
| struct md_rdev *rdev; |
| bio = r1_bio->bios[i]; |
| |
| rdev = conf->mirrors[i].rdev; |
| if (rdev == NULL || |
| test_bit(Faulty, &rdev->flags)) { |
| if (i < conf->raid_disks) |
| still_degraded = true; |
| } else if (!test_bit(In_sync, &rdev->flags)) { |
| bio->bi_opf = REQ_OP_WRITE; |
| bio->bi_end_io = end_sync_write; |
| write_targets ++; |
| } else { |
| /* may need to read from here */ |
| sector_t first_bad = MaxSector; |
| int bad_sectors; |
| |
| if (is_badblock(rdev, sector_nr, good_sectors, |
| &first_bad, &bad_sectors)) { |
| if (first_bad > sector_nr) |
| good_sectors = first_bad - sector_nr; |
| else { |
| bad_sectors -= (sector_nr - first_bad); |
| if (min_bad == 0 || |
| min_bad > bad_sectors) |
| min_bad = bad_sectors; |
| } |
| } |
| if (sector_nr < first_bad) { |
| if (test_bit(WriteMostly, &rdev->flags)) { |
| if (wonly < 0) |
| wonly = i; |
| } else { |
| if (disk < 0) |
| disk = i; |
| } |
| bio->bi_opf = REQ_OP_READ; |
| bio->bi_end_io = end_sync_read; |
| read_targets++; |
| } else if (!test_bit(WriteErrorSeen, &rdev->flags) && |
| test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && |
| !test_bit(MD_RECOVERY_CHECK, &mddev->recovery)) { |
| /* |
| * The device is suitable for reading (InSync), |
| * but has bad block(s) here. Let's try to correct them, |
| * if we are doing resync or repair. Otherwise, leave |
| * this device alone for this sync request. |
| */ |
| bio->bi_opf = REQ_OP_WRITE; |
| bio->bi_end_io = end_sync_write; |
| write_targets++; |
| } |
| } |
| if (rdev && bio->bi_end_io) { |
| atomic_inc(&rdev->nr_pending); |
| bio->bi_iter.bi_sector = sector_nr + rdev->data_offset; |
| bio_set_dev(bio, rdev->bdev); |
| if (test_bit(FailFast, &rdev->flags)) |
| bio->bi_opf |= MD_FAILFAST; |
| } |
| } |
| if (disk < 0) |
| disk = wonly; |
| r1_bio->read_disk = disk; |
| |
| if (read_targets == 0 && min_bad > 0) { |
| /* These sectors are bad on all InSync devices, so we |
| * need to mark them bad on all write targets |
| */ |
| int ok = 1; |
| for (i = 0 ; i < conf->raid_disks * 2 ; i++) |
| if (r1_bio->bios[i]->bi_end_io == end_sync_write) { |
| struct md_rdev *rdev = conf->mirrors[i].rdev; |
| ok = rdev_set_badblocks(rdev, sector_nr, |
| min_bad, 0 |
| ) && ok; |
| } |
| set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags); |
| *skipped = 1; |
| put_buf(r1_bio); |
| |
| if (!ok) { |
| /* Cannot record the badblocks, so need to |
| * abort the resync. |
| * If there are multiple read targets, could just |
| * fail the really bad ones ??? |
| */ |
| conf->recovery_disabled = mddev->recovery_disabled; |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); |
| return 0; |
| } else |
| return min_bad; |
| |
| } |
| if (min_bad > 0 && min_bad < good_sectors) { |
| /* only resync enough to reach the next bad->good |
| * transition */ |
| good_sectors = min_bad; |
| } |
| |
| if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && read_targets > 0) |
| /* extra read targets are also write targets */ |
| write_targets += read_targets-1; |
| |
| if (write_targets == 0 || read_targets == 0) { |
| /* There is nowhere to write, so all non-sync |
| * drives must be failed - so we are finished |
| */ |
| sector_t rv; |
| if (min_bad > 0) |
| max_sector = sector_nr + min_bad; |
| rv = max_sector - sector_nr; |
| *skipped = 1; |
| put_buf(r1_bio); |
| return rv; |
| } |
| |
| if (max_sector > mddev->resync_max) |
| max_sector = mddev->resync_max; /* Don't do IO beyond here */ |
| if (max_sector > sector_nr + good_sectors) |
| max_sector = sector_nr + good_sectors; |
| nr_sectors = 0; |
| sync_blocks = 0; |
| do { |
| struct page *page; |
| int len = PAGE_SIZE; |
| if (sector_nr + (len>>9) > max_sector) |
| len = (max_sector - sector_nr) << 9; |
| if (len == 0) |
| break; |
| if (sync_blocks == 0) { |
| if (!mddev->bitmap_ops->start_sync(mddev, sector_nr, |
| &sync_blocks, still_degraded) && |
| !conf->fullsync && |
| !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) |
| break; |
| if ((len >> 9) > sync_blocks) |
| len = sync_blocks<<9; |
| } |
| |
| for (i = 0 ; i < conf->raid_disks * 2; i++) { |
| struct resync_pages *rp; |
| |
| bio = r1_bio->bios[i]; |
| rp = get_resync_pages(bio); |
| if (bio->bi_end_io) { |
| page = resync_fetch_page(rp, page_idx); |
| |
| /* |
| * won't fail because the vec table is big |
| * enough to hold all these pages |
| */ |
| __bio_add_page(bio, page, len, 0); |
| } |
| } |
| nr_sectors += len>>9; |
| sector_nr += len>>9; |
| sync_blocks -= (len>>9); |
| } while (++page_idx < RESYNC_PAGES); |
| |
| r1_bio->sectors = nr_sectors; |
| |
| if (mddev_is_clustered(mddev) && |
| conf->cluster_sync_high < sector_nr + nr_sectors) { |
| conf->cluster_sync_low = mddev->curr_resync_completed; |
| conf->cluster_sync_high = conf->cluster_sync_low + CLUSTER_RESYNC_WINDOW_SECTORS; |
| /* Send resync message */ |
| md_cluster_ops->resync_info_update(mddev, |
| conf->cluster_sync_low, |
| conf->cluster_sync_high); |
| } |
| |
| /* For a user-requested sync, we read all readable devices and do a |
| * compare |
| */ |
| if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { |
| atomic_set(&r1_bio->remaining, read_targets); |
| for (i = 0; i < conf->raid_disks * 2 && read_targets; i++) { |
| bio = r1_bio->bios[i]; |
| if (bio->bi_end_io == end_sync_read) { |
| read_targets--; |
| md_sync_acct_bio(bio, nr_sectors); |
| if (read_targets == 1) |
| bio->bi_opf &= ~MD_FAILFAST; |
| submit_bio_noacct(bio); |
| } |
| } |
| } else { |
| atomic_set(&r1_bio->remaining, 1); |
| bio = r1_bio->bios[r1_bio->read_disk]; |
| md_sync_acct_bio(bio, nr_sectors); |
| if (read_targets == 1) |
| bio->bi_opf &= ~MD_FAILFAST; |
| submit_bio_noacct(bio); |
| } |
| return nr_sectors; |
| } |
| |
| static sector_t raid1_size(struct mddev *mddev, sector_t sectors, int raid_disks) |
| { |
| if (sectors) |
| return sectors; |
| |
| return mddev->dev_sectors; |
| } |
| |
| static struct r1conf *setup_conf(struct mddev *mddev) |
| { |
| struct r1conf *conf; |
| int i; |
| struct raid1_info *disk; |
| struct md_rdev *rdev; |
| int err = -ENOMEM; |
| |
| conf = kzalloc(sizeof(struct r1conf), GFP_KERNEL); |
| if (!conf) |
| goto abort; |
| |
| conf->nr_pending = kcalloc(BARRIER_BUCKETS_NR, |
| sizeof(atomic_t), GFP_KERNEL); |
| if (!conf->nr_pending) |
| goto abort; |
| |
| conf->nr_waiting = kcalloc(BARRIER_BUCKETS_NR, |
| sizeof(atomic_t), GFP_KERNEL); |
| if (!conf->nr_waiting) |
| goto abort; |
| |
| conf->nr_queued = kcalloc(BARRIER_BUCKETS_NR, |
| sizeof(atomic_t), GFP_KERNEL); |
| if (!conf->nr_queued) |
| goto abort; |
| |
| conf->barrier = kcalloc(BARRIER_BUCKETS_NR, |
| sizeof(atomic_t), GFP_KERNEL); |
| if (!conf->barrier) |
| goto abort; |
| |
| conf->mirrors = kzalloc(array3_size(sizeof(struct raid1_info), |
| mddev->raid_disks, 2), |
| GFP_KERNEL); |
| if (!conf->mirrors) |
| goto abort; |
| |
| conf->tmppage = alloc_page(GFP_KERNEL); |
| if (!conf->tmppage) |
| goto abort; |
| |
| conf->poolinfo = kzalloc(sizeof(*conf->poolinfo), GFP_KERNEL); |
| if (!conf->poolinfo) |
| goto abort; |
| conf->poolinfo->raid_disks = mddev->raid_disks * 2; |
| err = mempool_init(&conf->r1bio_pool, NR_RAID_BIOS, r1bio_pool_alloc, |
| rbio_pool_free, conf->poolinfo); |
| if (err) |
| goto abort; |
| |
| err = bioset_init(&conf->bio_split, BIO_POOL_SIZE, 0, 0); |
| if (err) |
| goto abort; |
| |
| conf->poolinfo->mddev = mddev; |
| |
| err = -EINVAL; |
| spin_lock_init(&conf->device_lock); |
| conf->raid_disks = mddev->raid_disks; |
| rdev_for_each(rdev, mddev) { |
| int disk_idx = rdev->raid_disk; |
| |
| if (disk_idx >= conf->raid_disks || disk_idx < 0) |
| continue; |
| |
| if (!raid1_add_conf(conf, rdev, disk_idx, |
| test_bit(Replacement, &rdev->flags))) |
| goto abort; |
| } |
| conf->mddev = mddev; |
| INIT_LIST_HEAD(&conf->retry_list); |
| INIT_LIST_HEAD(&conf->bio_end_io_list); |
| |
| spin_lock_init(&conf->resync_lock); |
| init_waitqueue_head(&conf->wait_barrier); |
| |
| bio_list_init(&conf->pending_bio_list); |
| conf->recovery_disabled = mddev->recovery_disabled - 1; |
| |
| err = -EIO; |
| for (i = 0; i < conf->raid_disks * 2; i++) { |
| |
| disk = conf->mirrors + i; |
| |
| if (i < conf->raid_disks && |
| disk[conf->raid_disks].rdev) { |
| /* This slot has a replacement. */ |
| if (!disk->rdev) { |
| /* No original, just make the replacement |
| * a recovering spare |
| */ |
| disk->rdev = |
| disk[conf->raid_disks].rdev; |
| disk[conf->raid_disks].rdev = NULL; |
| } else if (!test_bit(In_sync, &disk->rdev->flags)) |
| /* Original is not in_sync - bad */ |
| goto abort; |
| } |
| |
| if (!disk->rdev || |
| !test_bit(In_sync, &disk->rdev->flags)) { |
| disk->head_position = 0; |
| if (disk->rdev && |
| (disk->rdev->saved_raid_disk < 0)) |
| conf->fullsync = 1; |
| } |
| } |
| |
| err = -ENOMEM; |
| rcu_assign_pointer(conf->thread, |
| md_register_thread(raid1d, mddev, "raid1")); |
| if (!conf->thread) |
| goto abort; |
| |
| return conf; |
| |
| abort: |
| if (conf) { |
| mempool_exit(&conf->r1bio_pool); |
| kfree(conf->mirrors); |
| safe_put_page(conf->tmppage); |
| kfree(conf->poolinfo); |
| kfree(conf->nr_pending); |
| kfree(conf->nr_waiting); |
| kfree(conf->nr_queued); |
| kfree(conf->barrier); |
| bioset_exit(&conf->bio_split); |
| kfree(conf); |
| } |
| return ERR_PTR(err); |
| } |
| |
| static int raid1_set_limits(struct mddev *mddev) |
| { |
| struct queue_limits lim; |
| int err; |
| |
| md_init_stacking_limits(&lim); |
| lim.max_write_zeroes_sectors = 0; |
| err = mddev_stack_rdev_limits(mddev, &lim, MDDEV_STACK_INTEGRITY); |
| if (err) { |
| queue_limits_cancel_update(mddev->gendisk->queue); |
| return err; |
| } |
| return queue_limits_set(mddev->gendisk->queue, &lim); |
| } |
| |
| static int raid1_run(struct mddev *mddev) |
| { |
| struct r1conf *conf; |
| int i; |
| int ret; |
| |
| if (mddev->level != 1) { |
| pr_warn("md/raid1:%s: raid level not set to mirroring (%d)\n", |
| mdname(mddev), mddev->level); |
| return -EIO; |
| } |
| if (mddev->reshape_position != MaxSector) { |
| pr_warn("md/raid1:%s: reshape_position set but not supported\n", |
| mdname(mddev)); |
| return -EIO; |
| } |
| |
| /* |
| * copy the already verified devices into our private RAID1 |
| * bookkeeping area. [whatever we allocate in run(), |
| * should be freed in raid1_free()] |
| */ |
| if (mddev->private == NULL) |
| conf = setup_conf(mddev); |
| else |
| conf = mddev->private; |
| |
| if (IS_ERR(conf)) |
| return PTR_ERR(conf); |
| |
| if (!mddev_is_dm(mddev)) { |
| ret = raid1_set_limits(mddev); |
| if (ret) |
| return ret; |
| } |
| |
| mddev->degraded = 0; |
| for (i = 0; i < conf->raid_disks; i++) |
| if (conf->mirrors[i].rdev == NULL || |
| !test_bit(In_sync, &conf->mirrors[i].rdev->flags) || |
| test_bit(Faulty, &conf->mirrors[i].rdev->flags)) |
| mddev->degraded++; |
| /* |
| * RAID1 needs at least one disk in active |
| */ |
| if (conf->raid_disks - mddev->degraded < 1) { |
| md_unregister_thread(mddev, &conf->thread); |
| return -EINVAL; |
| } |
| |
| if (conf->raid_disks - mddev->degraded == 1) |
| mddev->recovery_cp = MaxSector; |
| |
| if (mddev->recovery_cp != MaxSector) |
| pr_info("md/raid1:%s: not clean -- starting background reconstruction\n", |
| mdname(mddev)); |
| pr_info("md/raid1:%s: active with %d out of %d mirrors\n", |
| mdname(mddev), mddev->raid_disks - mddev->degraded, |
| mddev->raid_disks); |
| |
| /* |
| * Ok, everything is just fine now |
| */ |
| rcu_assign_pointer(mddev->thread, conf->thread); |
| rcu_assign_pointer(conf->thread, NULL); |
| mddev->private = conf; |
| set_bit(MD_FAILFAST_SUPPORTED, &mddev->flags); |
| |
| md_set_array_sectors(mddev, raid1_size(mddev, 0, 0)); |
| |
| ret = md_integrity_register(mddev); |
| if (ret) |
| md_unregister_thread(mddev, &mddev->thread); |
| return ret; |
| } |
| |
| static void raid1_free(struct mddev *mddev, void *priv) |
| { |
| struct r1conf *conf = priv; |
| |
| mempool_exit(&conf->r1bio_pool); |
| kfree(conf->mirrors); |
| safe_put_page(conf->tmppage); |
| kfree(conf->poolinfo); |
| kfree(conf->nr_pending); |
| kfree(conf->nr_waiting); |
| kfree(conf->nr_queued); |
| kfree(conf->barrier); |
| bioset_exit(&conf->bio_split); |
| kfree(conf); |
| } |
| |
| static int raid1_resize(struct mddev *mddev, sector_t sectors) |
| { |
| /* no resync is happening, and there is enough space |
| * on all devices, so we can resize. |
| * We need to make sure resync covers any new space. |
| * If the array is shrinking we should possibly wait until |
| * any io in the removed space completes, but it hardly seems |
| * worth it. |
| */ |
| sector_t newsize = raid1_size(mddev, sectors, 0); |
| int ret; |
| |
| if (mddev->external_size && |
| mddev->array_sectors > newsize) |
| return -EINVAL; |
| |
| ret = mddev->bitmap_ops->resize(mddev, newsize, 0, false); |
| if (ret) |
| return ret; |
| |
| md_set_array_sectors(mddev, newsize); |
| if (sectors > mddev->dev_sectors && |
| mddev->recovery_cp > mddev->dev_sectors) { |
| mddev->recovery_cp = mddev->dev_sectors; |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| } |
| mddev->dev_sectors = sectors; |
| mddev->resync_max_sectors = sectors; |
| return 0; |
| } |
| |
| static int raid1_reshape(struct mddev *mddev) |
| { |
| /* We need to: |
| * 1/ resize the r1bio_pool |
| * 2/ resize conf->mirrors |
| * |
| * We allocate a new r1bio_pool if we can. |
| * Then raise a device barrier and wait until all IO stops. |
| * Then resize conf->mirrors and swap in the new r1bio pool. |
| * |
| * At the same time, we "pack" the devices so that all the missing |
| * devices have the higher raid_disk numbers. |
| */ |
| mempool_t newpool, oldpool; |
| struct pool_info *newpoolinfo; |
| struct raid1_info *newmirrors; |
| struct r1conf *conf = mddev->private; |
| int cnt, raid_disks; |
| unsigned long flags; |
| int d, d2; |
| int ret; |
| |
| memset(&newpool, 0, sizeof(newpool)); |
| memset(&oldpool, 0, sizeof(oldpool)); |
| |
| /* Cannot change chunk_size, layout, or level */ |
| if (mddev->chunk_sectors != mddev->new_chunk_sectors || |
| mddev->layout != mddev->new_layout || |
| mddev->level != mddev->new_level) { |
| mddev->new_chunk_sectors = mddev->chunk_sectors; |
| mddev->new_layout = mddev->layout; |
| mddev->new_level = mddev->level; |
| return -EINVAL; |
| } |
| |
| if (!mddev_is_clustered(mddev)) |
| md_allow_write(mddev); |
| |
| raid_disks = mddev->raid_disks + mddev->delta_disks; |
| |
| if (raid_disks < conf->raid_disks) { |
| cnt=0; |
| for (d= 0; d < conf->raid_disks; d++) |
| if (conf->mirrors[d].rdev) |
| cnt++; |
| if (cnt > raid_disks) |
| return -EBUSY; |
| } |
| |
| newpoolinfo = kmalloc(sizeof(*newpoolinfo), GFP_KERNEL); |
| if (!newpoolinfo) |
| return -ENOMEM; |
| newpoolinfo->mddev = mddev; |
| newpoolinfo->raid_disks = raid_disks * 2; |
| |
| ret = mempool_init(&newpool, NR_RAID_BIOS, r1bio_pool_alloc, |
| rbio_pool_free, newpoolinfo); |
| if (ret) { |
| kfree(newpoolinfo); |
| return ret; |
| } |
| newmirrors = kzalloc(array3_size(sizeof(struct raid1_info), |
| raid_disks, 2), |
| GFP_KERNEL); |
| if (!newmirrors) { |
| kfree(newpoolinfo); |
| mempool_exit(&newpool); |
| return -ENOMEM; |
| } |
| |
| freeze_array(conf, 0); |
| |
| /* ok, everything is stopped */ |
| oldpool = conf->r1bio_pool; |
| conf->r1bio_pool = newpool; |
| |
| for (d = d2 = 0; d < conf->raid_disks; d++) { |
| struct md_rdev *rdev = conf->mirrors[d].rdev; |
| if (rdev && rdev->raid_disk != d2) { |
| sysfs_unlink_rdev(mddev, rdev); |
| rdev->raid_disk = d2; |
| sysfs_unlink_rdev(mddev, rdev); |
| if (sysfs_link_rdev(mddev, rdev)) |
| pr_warn("md/raid1:%s: cannot register rd%d\n", |
| mdname(mddev), rdev->raid_disk); |
| } |
| if (rdev) |
| newmirrors[d2++].rdev = rdev; |
| } |
| kfree(conf->mirrors); |
| conf->mirrors = newmirrors; |
| kfree(conf->poolinfo); |
| conf->poolinfo = newpoolinfo; |
| |
| spin_lock_irqsave(&conf->device_lock, flags); |
| mddev->degraded += (raid_disks - conf->raid_disks); |
| spin_unlock_irqrestore(&conf->device_lock, flags); |
| conf->raid_disks = mddev->raid_disks = raid_disks; |
| mddev->delta_disks = 0; |
| |
| unfreeze_array(conf); |
| |
| set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); |
| md_wakeup_thread(mddev->thread); |
| |
| mempool_exit(&oldpool); |
| return 0; |
| } |
| |
| static void raid1_quiesce(struct mddev *mddev, int quiesce) |
| { |
| struct r1conf *conf = mddev->private; |
| |
| if (quiesce) |
| freeze_array(conf, 0); |
| else |
| unfreeze_array(conf); |
| } |
| |
| static void *raid1_takeover(struct mddev *mddev) |
| { |
| /* raid1 can take over: |
| * raid5 with 2 devices, any layout or chunk size |
| */ |
| if (mddev->level == 5 && mddev->raid_disks == 2) { |
| struct r1conf *conf; |
| mddev->new_level = 1; |
| mddev->new_layout = 0; |
| mddev->new_chunk_sectors = 0; |
| conf = setup_conf(mddev); |
| if (!IS_ERR(conf)) { |
| /* Array must appear to be quiesced */ |
| conf->array_frozen = 1; |
| mddev_clear_unsupported_flags(mddev, |
| UNSUPPORTED_MDDEV_FLAGS); |
| } |
| return conf; |
| } |
| return ERR_PTR(-EINVAL); |
| } |
| |
| static struct md_personality raid1_personality = |
| { |
| .name = "raid1", |
| .level = 1, |
| .owner = THIS_MODULE, |
| .make_request = raid1_make_request, |
| .run = raid1_run, |
| .free = raid1_free, |
| .status = raid1_status, |
| .error_handler = raid1_error, |
| .hot_add_disk = raid1_add_disk, |
| .hot_remove_disk= raid1_remove_disk, |
| .spare_active = raid1_spare_active, |
| .sync_request = raid1_sync_request, |
| .resize = raid1_resize, |
| .size = raid1_size, |
| .check_reshape = raid1_reshape, |
| .quiesce = raid1_quiesce, |
| .takeover = raid1_takeover, |
| }; |
| |
| static int __init raid_init(void) |
| { |
| return register_md_personality(&raid1_personality); |
| } |
| |
| static void raid_exit(void) |
| { |
| unregister_md_personality(&raid1_personality); |
| } |
| |
| module_init(raid_init); |
| module_exit(raid_exit); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("RAID1 (mirroring) personality for MD"); |
| MODULE_ALIAS("md-personality-3"); /* RAID1 */ |
| MODULE_ALIAS("md-raid1"); |
| MODULE_ALIAS("md-level-1"); |