| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pm_qos.h> |
| #include <linux/irq.h> |
| #include <media/rc-core.h> |
| |
| #define GPIO_IR_DEVICE_NAME "gpio_ir_recv" |
| |
| struct gpio_rc_dev { |
| struct rc_dev *rcdev; |
| struct gpio_desc *gpiod; |
| int irq; |
| struct device *pmdev; |
| struct pm_qos_request qos; |
| }; |
| |
| static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id) |
| { |
| int val; |
| struct gpio_rc_dev *gpio_dev = dev_id; |
| struct device *pmdev = gpio_dev->pmdev; |
| |
| /* |
| * For some cpuidle systems, not all: |
| * Respond to interrupt taking more latency when cpu in idle. |
| * Invoke asynchronous pm runtime get from interrupt context, |
| * this may introduce a millisecond delay to call resume callback, |
| * where to disable cpuilde. |
| * |
| * Two issues lead to fail to decode first frame, one is latency to |
| * respond to interrupt, another is delay introduced by async api. |
| */ |
| if (pmdev) |
| pm_runtime_get(pmdev); |
| |
| val = gpiod_get_value(gpio_dev->gpiod); |
| if (val >= 0) |
| ir_raw_event_store_edge(gpio_dev->rcdev, val == 1); |
| |
| if (pmdev) { |
| pm_runtime_mark_last_busy(pmdev); |
| pm_runtime_put_autosuspend(pmdev); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int gpio_ir_recv_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct gpio_rc_dev *gpio_dev; |
| struct rc_dev *rcdev; |
| u32 period = 0; |
| int rc; |
| |
| if (!np) |
| return -ENODEV; |
| |
| gpio_dev = devm_kzalloc(dev, sizeof(*gpio_dev), GFP_KERNEL); |
| if (!gpio_dev) |
| return -ENOMEM; |
| |
| gpio_dev->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN); |
| if (IS_ERR(gpio_dev->gpiod)) |
| return dev_err_probe(dev, PTR_ERR(gpio_dev->gpiod), |
| "error getting gpio\n"); |
| gpio_dev->irq = gpiod_to_irq(gpio_dev->gpiod); |
| if (gpio_dev->irq < 0) |
| return gpio_dev->irq; |
| |
| rcdev = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW); |
| if (!rcdev) |
| return -ENOMEM; |
| |
| rcdev->priv = gpio_dev; |
| rcdev->device_name = GPIO_IR_DEVICE_NAME; |
| rcdev->input_phys = GPIO_IR_DEVICE_NAME "/input0"; |
| rcdev->input_id.bustype = BUS_HOST; |
| rcdev->input_id.vendor = 0x0001; |
| rcdev->input_id.product = 0x0001; |
| rcdev->input_id.version = 0x0100; |
| rcdev->dev.parent = dev; |
| rcdev->driver_name = KBUILD_MODNAME; |
| rcdev->min_timeout = 1; |
| rcdev->timeout = IR_DEFAULT_TIMEOUT; |
| rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; |
| rcdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; |
| rcdev->map_name = of_get_property(np, "linux,rc-map-name", NULL); |
| if (!rcdev->map_name) |
| rcdev->map_name = RC_MAP_EMPTY; |
| |
| gpio_dev->rcdev = rcdev; |
| if (of_property_read_bool(np, "wakeup-source")) |
| device_init_wakeup(dev, true); |
| |
| rc = devm_rc_register_device(dev, rcdev); |
| if (rc < 0) { |
| dev_err(dev, "failed to register rc device (%d)\n", rc); |
| return rc; |
| } |
| |
| of_property_read_u32(np, "linux,autosuspend-period", &period); |
| if (period) { |
| gpio_dev->pmdev = dev; |
| pm_runtime_set_autosuspend_delay(dev, period); |
| pm_runtime_use_autosuspend(dev); |
| pm_runtime_set_suspended(dev); |
| pm_runtime_enable(dev); |
| } |
| |
| platform_set_drvdata(pdev, gpio_dev); |
| |
| return devm_request_irq(dev, gpio_dev->irq, gpio_ir_recv_irq, |
| IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, |
| "gpio-ir-recv-irq", gpio_dev); |
| } |
| |
| static void gpio_ir_recv_remove(struct platform_device *pdev) |
| { |
| struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev); |
| struct device *pmdev = gpio_dev->pmdev; |
| |
| if (pmdev) { |
| pm_runtime_get_sync(pmdev); |
| cpu_latency_qos_remove_request(&gpio_dev->qos); |
| |
| pm_runtime_disable(pmdev); |
| pm_runtime_put_noidle(pmdev); |
| pm_runtime_set_suspended(pmdev); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| static int gpio_ir_recv_suspend(struct device *dev) |
| { |
| struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(gpio_dev->irq); |
| else |
| disable_irq(gpio_dev->irq); |
| |
| return 0; |
| } |
| |
| static int gpio_ir_recv_resume(struct device *dev) |
| { |
| struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(gpio_dev->irq); |
| else |
| enable_irq(gpio_dev->irq); |
| |
| return 0; |
| } |
| |
| static int gpio_ir_recv_runtime_suspend(struct device *dev) |
| { |
| struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev); |
| |
| cpu_latency_qos_remove_request(&gpio_dev->qos); |
| |
| return 0; |
| } |
| |
| static int gpio_ir_recv_runtime_resume(struct device *dev) |
| { |
| struct gpio_rc_dev *gpio_dev = dev_get_drvdata(dev); |
| |
| cpu_latency_qos_add_request(&gpio_dev->qos, 0); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops gpio_ir_recv_pm_ops = { |
| .suspend = gpio_ir_recv_suspend, |
| .resume = gpio_ir_recv_resume, |
| .runtime_suspend = gpio_ir_recv_runtime_suspend, |
| .runtime_resume = gpio_ir_recv_runtime_resume, |
| }; |
| #endif |
| |
| static const struct of_device_id gpio_ir_recv_of_match[] = { |
| { .compatible = "gpio-ir-receiver", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, gpio_ir_recv_of_match); |
| |
| static struct platform_driver gpio_ir_recv_driver = { |
| .probe = gpio_ir_recv_probe, |
| .remove_new = gpio_ir_recv_remove, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = gpio_ir_recv_of_match, |
| #ifdef CONFIG_PM |
| .pm = &gpio_ir_recv_pm_ops, |
| #endif |
| }, |
| }; |
| module_platform_driver(gpio_ir_recv_driver); |
| |
| MODULE_DESCRIPTION("GPIO IR Receiver driver"); |
| MODULE_LICENSE("GPL v2"); |