| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * RISC-V performance counter support. |
| * |
| * Copyright (C) 2021 Western Digital Corporation or its affiliates. |
| * |
| * This code is based on ARM perf event code which is in turn based on |
| * sparc64 and x86 code. |
| */ |
| |
| #define pr_fmt(fmt) "riscv-pmu-sbi: " fmt |
| |
| #include <linux/mod_devicetable.h> |
| #include <linux/perf/riscv_pmu.h> |
| #include <linux/platform_device.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/of_irq.h> |
| #include <linux/of.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/sched/clock.h> |
| #include <linux/soc/andes/irq.h> |
| #include <linux/workqueue.h> |
| |
| #include <asm/errata_list.h> |
| #include <asm/sbi.h> |
| #include <asm/cpufeature.h> |
| #include <asm/vendor_extensions.h> |
| #include <asm/vendor_extensions/andes.h> |
| |
| #define ALT_SBI_PMU_OVERFLOW(__ovl) \ |
| asm volatile(ALTERNATIVE_2( \ |
| "csrr %0, " __stringify(CSR_SCOUNTOVF), \ |
| "csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF), \ |
| THEAD_VENDOR_ID, ERRATA_THEAD_PMU, \ |
| CONFIG_ERRATA_THEAD_PMU, \ |
| "csrr %0, " __stringify(ANDES_CSR_SCOUNTEROF), \ |
| ANDES_VENDOR_ID, \ |
| RISCV_ISA_VENDOR_EXT_XANDESPMU + RISCV_VENDOR_EXT_ALTERNATIVES_BASE, \ |
| CONFIG_ANDES_CUSTOM_PMU) \ |
| : "=r" (__ovl) : \ |
| : "memory") |
| |
| #define ALT_SBI_PMU_OVF_CLEAR_PENDING(__irq_mask) \ |
| asm volatile(ALTERNATIVE( \ |
| "csrc " __stringify(CSR_IP) ", %0\n\t", \ |
| "csrc " __stringify(ANDES_CSR_SLIP) ", %0\n\t", \ |
| ANDES_VENDOR_ID, \ |
| RISCV_ISA_VENDOR_EXT_XANDESPMU + RISCV_VENDOR_EXT_ALTERNATIVES_BASE, \ |
| CONFIG_ANDES_CUSTOM_PMU) \ |
| : : "r"(__irq_mask) \ |
| : "memory") |
| |
| #define SYSCTL_NO_USER_ACCESS 0 |
| #define SYSCTL_USER_ACCESS 1 |
| #define SYSCTL_LEGACY 2 |
| |
| #define PERF_EVENT_FLAG_NO_USER_ACCESS BIT(SYSCTL_NO_USER_ACCESS) |
| #define PERF_EVENT_FLAG_USER_ACCESS BIT(SYSCTL_USER_ACCESS) |
| #define PERF_EVENT_FLAG_LEGACY BIT(SYSCTL_LEGACY) |
| |
| PMU_FORMAT_ATTR(event, "config:0-47"); |
| PMU_FORMAT_ATTR(firmware, "config:62-63"); |
| |
| static bool sbi_v2_available; |
| static DEFINE_STATIC_KEY_FALSE(sbi_pmu_snapshot_available); |
| #define sbi_pmu_snapshot_available() \ |
| static_branch_unlikely(&sbi_pmu_snapshot_available) |
| |
| static struct attribute *riscv_arch_formats_attr[] = { |
| &format_attr_event.attr, |
| &format_attr_firmware.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group riscv_pmu_format_group = { |
| .name = "format", |
| .attrs = riscv_arch_formats_attr, |
| }; |
| |
| static const struct attribute_group *riscv_pmu_attr_groups[] = { |
| &riscv_pmu_format_group, |
| NULL, |
| }; |
| |
| /* Allow user mode access by default */ |
| static int sysctl_perf_user_access __read_mostly = SYSCTL_USER_ACCESS; |
| |
| /* |
| * RISC-V doesn't have heterogeneous harts yet. This need to be part of |
| * per_cpu in case of harts with different pmu counters |
| */ |
| static union sbi_pmu_ctr_info *pmu_ctr_list; |
| static bool riscv_pmu_use_irq; |
| static unsigned int riscv_pmu_irq_num; |
| static unsigned int riscv_pmu_irq_mask; |
| static unsigned int riscv_pmu_irq; |
| |
| /* Cache the available counters in a bitmask */ |
| static unsigned long cmask; |
| |
| struct sbi_pmu_event_data { |
| union { |
| union { |
| struct hw_gen_event { |
| uint32_t event_code:16; |
| uint32_t event_type:4; |
| uint32_t reserved:12; |
| } hw_gen_event; |
| struct hw_cache_event { |
| uint32_t result_id:1; |
| uint32_t op_id:2; |
| uint32_t cache_id:13; |
| uint32_t event_type:4; |
| uint32_t reserved:12; |
| } hw_cache_event; |
| }; |
| uint32_t event_idx; |
| }; |
| }; |
| |
| static struct sbi_pmu_event_data pmu_hw_event_map[] = { |
| [PERF_COUNT_HW_CPU_CYCLES] = {.hw_gen_event = { |
| SBI_PMU_HW_CPU_CYCLES, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_INSTRUCTIONS] = {.hw_gen_event = { |
| SBI_PMU_HW_INSTRUCTIONS, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_CACHE_REFERENCES] = {.hw_gen_event = { |
| SBI_PMU_HW_CACHE_REFERENCES, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_CACHE_MISSES] = {.hw_gen_event = { |
| SBI_PMU_HW_CACHE_MISSES, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = {.hw_gen_event = { |
| SBI_PMU_HW_BRANCH_INSTRUCTIONS, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_BRANCH_MISSES] = {.hw_gen_event = { |
| SBI_PMU_HW_BRANCH_MISSES, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_BUS_CYCLES] = {.hw_gen_event = { |
| SBI_PMU_HW_BUS_CYCLES, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = {.hw_gen_event = { |
| SBI_PMU_HW_STALLED_CYCLES_FRONTEND, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = {.hw_gen_event = { |
| SBI_PMU_HW_STALLED_CYCLES_BACKEND, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| [PERF_COUNT_HW_REF_CPU_CYCLES] = {.hw_gen_event = { |
| SBI_PMU_HW_REF_CPU_CYCLES, |
| SBI_PMU_EVENT_TYPE_HW, 0}}, |
| }; |
| |
| #define C(x) PERF_COUNT_HW_CACHE_##x |
| static struct sbi_pmu_event_data pmu_cache_event_map[PERF_COUNT_HW_CACHE_MAX] |
| [PERF_COUNT_HW_CACHE_OP_MAX] |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { |
| [C(L1D)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_READ), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_READ), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_WRITE), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_WRITE), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_PREFETCH), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_PREFETCH), C(L1D), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| }, |
| [C(L1I)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_READ), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), C(OP_READ), |
| C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_WRITE), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_WRITE), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_PREFETCH), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_PREFETCH), C(L1I), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| }, |
| [C(LL)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_READ), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_READ), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_WRITE), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_WRITE), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_PREFETCH), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_PREFETCH), C(LL), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| }, |
| [C(DTLB)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_READ), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_READ), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_WRITE), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_WRITE), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_PREFETCH), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_PREFETCH), C(DTLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| }, |
| [C(ITLB)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_READ), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_READ), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_WRITE), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_WRITE), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_PREFETCH), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_PREFETCH), C(ITLB), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| }, |
| [C(BPU)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_READ), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_READ), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_WRITE), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_WRITE), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_PREFETCH), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_PREFETCH), C(BPU), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| }, |
| [C(NODE)] = { |
| [C(OP_READ)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_READ), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_READ), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_WRITE)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_WRITE), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_WRITE), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| [C(OP_PREFETCH)] = { |
| [C(RESULT_ACCESS)] = {.hw_cache_event = {C(RESULT_ACCESS), |
| C(OP_PREFETCH), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| [C(RESULT_MISS)] = {.hw_cache_event = {C(RESULT_MISS), |
| C(OP_PREFETCH), C(NODE), SBI_PMU_EVENT_TYPE_CACHE, 0}}, |
| }, |
| }, |
| }; |
| |
| static void pmu_sbi_check_event(struct sbi_pmu_event_data *edata) |
| { |
| struct sbiret ret; |
| |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, |
| 0, cmask, 0, edata->event_idx, 0, 0); |
| if (!ret.error) { |
| sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, |
| ret.value, 0x1, SBI_PMU_STOP_FLAG_RESET, 0, 0, 0); |
| } else if (ret.error == SBI_ERR_NOT_SUPPORTED) { |
| /* This event cannot be monitored by any counter */ |
| edata->event_idx = -ENOENT; |
| } |
| } |
| |
| static void pmu_sbi_check_std_events(struct work_struct *work) |
| { |
| for (int i = 0; i < ARRAY_SIZE(pmu_hw_event_map); i++) |
| pmu_sbi_check_event(&pmu_hw_event_map[i]); |
| |
| for (int i = 0; i < ARRAY_SIZE(pmu_cache_event_map); i++) |
| for (int j = 0; j < ARRAY_SIZE(pmu_cache_event_map[i]); j++) |
| for (int k = 0; k < ARRAY_SIZE(pmu_cache_event_map[i][j]); k++) |
| pmu_sbi_check_event(&pmu_cache_event_map[i][j][k]); |
| } |
| |
| static DECLARE_WORK(check_std_events_work, pmu_sbi_check_std_events); |
| |
| static int pmu_sbi_ctr_get_width(int idx) |
| { |
| return pmu_ctr_list[idx].width; |
| } |
| |
| static bool pmu_sbi_ctr_is_fw(int cidx) |
| { |
| union sbi_pmu_ctr_info *info; |
| |
| info = &pmu_ctr_list[cidx]; |
| if (!info) |
| return false; |
| |
| return (info->type == SBI_PMU_CTR_TYPE_FW) ? true : false; |
| } |
| |
| /* |
| * Returns the counter width of a programmable counter and number of hardware |
| * counters. As we don't support heterogeneous CPUs yet, it is okay to just |
| * return the counter width of the first programmable counter. |
| */ |
| int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr) |
| { |
| int i; |
| union sbi_pmu_ctr_info *info; |
| u32 hpm_width = 0, hpm_count = 0; |
| |
| if (!cmask) |
| return -EINVAL; |
| |
| for_each_set_bit(i, &cmask, RISCV_MAX_COUNTERS) { |
| info = &pmu_ctr_list[i]; |
| if (!info) |
| continue; |
| if (!hpm_width && info->csr != CSR_CYCLE && info->csr != CSR_INSTRET) |
| hpm_width = info->width; |
| if (info->type == SBI_PMU_CTR_TYPE_HW) |
| hpm_count++; |
| } |
| |
| *hw_ctr_width = hpm_width; |
| *num_hw_ctr = hpm_count; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(riscv_pmu_get_hpm_info); |
| |
| static uint8_t pmu_sbi_csr_index(struct perf_event *event) |
| { |
| return pmu_ctr_list[event->hw.idx].csr - CSR_CYCLE; |
| } |
| |
| static unsigned long pmu_sbi_get_filter_flags(struct perf_event *event) |
| { |
| unsigned long cflags = 0; |
| bool guest_events = false; |
| |
| if (event->attr.config1 & RISCV_PMU_CONFIG1_GUEST_EVENTS) |
| guest_events = true; |
| if (event->attr.exclude_kernel) |
| cflags |= guest_events ? SBI_PMU_CFG_FLAG_SET_VSINH : SBI_PMU_CFG_FLAG_SET_SINH; |
| if (event->attr.exclude_user) |
| cflags |= guest_events ? SBI_PMU_CFG_FLAG_SET_VUINH : SBI_PMU_CFG_FLAG_SET_UINH; |
| if (guest_events && event->attr.exclude_hv) |
| cflags |= SBI_PMU_CFG_FLAG_SET_SINH; |
| if (event->attr.exclude_host) |
| cflags |= SBI_PMU_CFG_FLAG_SET_UINH | SBI_PMU_CFG_FLAG_SET_SINH; |
| if (event->attr.exclude_guest) |
| cflags |= SBI_PMU_CFG_FLAG_SET_VSINH | SBI_PMU_CFG_FLAG_SET_VUINH; |
| |
| return cflags; |
| } |
| |
| static int pmu_sbi_ctr_get_idx(struct perf_event *event) |
| { |
| struct hw_perf_event *hwc = &event->hw; |
| struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu); |
| struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events); |
| struct sbiret ret; |
| int idx; |
| uint64_t cbase = 0, cmask = rvpmu->cmask; |
| unsigned long cflags = 0; |
| |
| cflags = pmu_sbi_get_filter_flags(event); |
| |
| /* |
| * In legacy mode, we have to force the fixed counters for those events |
| * but not in the user access mode as we want to use the other counters |
| * that support sampling/filtering. |
| */ |
| if ((hwc->flags & PERF_EVENT_FLAG_LEGACY) && (event->attr.type == PERF_TYPE_HARDWARE)) { |
| if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES) { |
| cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH; |
| cmask = 1; |
| } else if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS) { |
| cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH; |
| cmask = BIT(CSR_INSTRET - CSR_CYCLE); |
| } |
| } |
| |
| /* retrieve the available counter index */ |
| #if defined(CONFIG_32BIT) |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, |
| cmask, cflags, hwc->event_base, hwc->config, |
| hwc->config >> 32); |
| #else |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase, |
| cmask, cflags, hwc->event_base, hwc->config, 0); |
| #endif |
| if (ret.error) { |
| pr_debug("Not able to find a counter for event %lx config %llx\n", |
| hwc->event_base, hwc->config); |
| return sbi_err_map_linux_errno(ret.error); |
| } |
| |
| idx = ret.value; |
| if (!test_bit(idx, &rvpmu->cmask) || !pmu_ctr_list[idx].value) |
| return -ENOENT; |
| |
| /* Additional sanity check for the counter id */ |
| if (pmu_sbi_ctr_is_fw(idx)) { |
| if (!test_and_set_bit(idx, cpuc->used_fw_ctrs)) |
| return idx; |
| } else { |
| if (!test_and_set_bit(idx, cpuc->used_hw_ctrs)) |
| return idx; |
| } |
| |
| return -ENOENT; |
| } |
| |
| static void pmu_sbi_ctr_clear_idx(struct perf_event *event) |
| { |
| |
| struct hw_perf_event *hwc = &event->hw; |
| struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu); |
| struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events); |
| int idx = hwc->idx; |
| |
| if (pmu_sbi_ctr_is_fw(idx)) |
| clear_bit(idx, cpuc->used_fw_ctrs); |
| else |
| clear_bit(idx, cpuc->used_hw_ctrs); |
| } |
| |
| static int pmu_event_find_cache(u64 config) |
| { |
| unsigned int cache_type, cache_op, cache_result, ret; |
| |
| cache_type = (config >> 0) & 0xff; |
| if (cache_type >= PERF_COUNT_HW_CACHE_MAX) |
| return -EINVAL; |
| |
| cache_op = (config >> 8) & 0xff; |
| if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) |
| return -EINVAL; |
| |
| cache_result = (config >> 16) & 0xff; |
| if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) |
| return -EINVAL; |
| |
| ret = pmu_cache_event_map[cache_type][cache_op][cache_result].event_idx; |
| |
| return ret; |
| } |
| |
| static bool pmu_sbi_is_fw_event(struct perf_event *event) |
| { |
| u32 type = event->attr.type; |
| u64 config = event->attr.config; |
| |
| if ((type == PERF_TYPE_RAW) && ((config >> 63) == 1)) |
| return true; |
| else |
| return false; |
| } |
| |
| static int pmu_sbi_event_map(struct perf_event *event, u64 *econfig) |
| { |
| u32 type = event->attr.type; |
| u64 config = event->attr.config; |
| u64 raw_config_val; |
| int ret; |
| |
| /* |
| * Ensure we are finished checking standard hardware events for |
| * validity before allowing userspace to configure any events. |
| */ |
| flush_work(&check_std_events_work); |
| |
| switch (type) { |
| case PERF_TYPE_HARDWARE: |
| if (config >= PERF_COUNT_HW_MAX) |
| return -EINVAL; |
| ret = pmu_hw_event_map[event->attr.config].event_idx; |
| break; |
| case PERF_TYPE_HW_CACHE: |
| ret = pmu_event_find_cache(config); |
| break; |
| case PERF_TYPE_RAW: |
| /* |
| * As per SBI specification, the upper 16 bits must be unused |
| * for a raw event. |
| * Bits 63:62 are used to distinguish between raw events |
| * 00 - Hardware raw event |
| * 10 - SBI firmware events |
| * 11 - Risc-V platform specific firmware event |
| */ |
| raw_config_val = config & RISCV_PMU_RAW_EVENT_MASK; |
| switch (config >> 62) { |
| case 0: |
| ret = RISCV_PMU_RAW_EVENT_IDX; |
| *econfig = raw_config_val; |
| break; |
| case 2: |
| ret = (raw_config_val & 0xFFFF) | |
| (SBI_PMU_EVENT_TYPE_FW << 16); |
| break; |
| case 3: |
| /* |
| * For Risc-V platform specific firmware events |
| * Event code - 0xFFFF |
| * Event data - raw event encoding |
| */ |
| ret = SBI_PMU_EVENT_TYPE_FW << 16 | RISCV_PLAT_FW_EVENT; |
| *econfig = raw_config_val; |
| break; |
| } |
| break; |
| default: |
| ret = -ENOENT; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void pmu_sbi_snapshot_free(struct riscv_pmu *pmu) |
| { |
| int cpu; |
| |
| for_each_possible_cpu(cpu) { |
| struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); |
| |
| if (!cpu_hw_evt->snapshot_addr) |
| continue; |
| |
| free_page((unsigned long)cpu_hw_evt->snapshot_addr); |
| cpu_hw_evt->snapshot_addr = NULL; |
| cpu_hw_evt->snapshot_addr_phys = 0; |
| } |
| } |
| |
| static int pmu_sbi_snapshot_alloc(struct riscv_pmu *pmu) |
| { |
| int cpu; |
| struct page *snapshot_page; |
| |
| for_each_possible_cpu(cpu) { |
| struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); |
| |
| snapshot_page = alloc_page(GFP_ATOMIC | __GFP_ZERO); |
| if (!snapshot_page) { |
| pmu_sbi_snapshot_free(pmu); |
| return -ENOMEM; |
| } |
| cpu_hw_evt->snapshot_addr = page_to_virt(snapshot_page); |
| cpu_hw_evt->snapshot_addr_phys = page_to_phys(snapshot_page); |
| } |
| |
| return 0; |
| } |
| |
| static int pmu_sbi_snapshot_disable(void) |
| { |
| struct sbiret ret; |
| |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, SBI_SHMEM_DISABLE, |
| SBI_SHMEM_DISABLE, 0, 0, 0, 0); |
| if (ret.error) { |
| pr_warn("failed to disable snapshot shared memory\n"); |
| return sbi_err_map_linux_errno(ret.error); |
| } |
| |
| return 0; |
| } |
| |
| static int pmu_sbi_snapshot_setup(struct riscv_pmu *pmu, int cpu) |
| { |
| struct cpu_hw_events *cpu_hw_evt; |
| struct sbiret ret = {0}; |
| |
| cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu); |
| if (!cpu_hw_evt->snapshot_addr_phys) |
| return -EINVAL; |
| |
| if (cpu_hw_evt->snapshot_set_done) |
| return 0; |
| |
| if (IS_ENABLED(CONFIG_32BIT)) |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, |
| cpu_hw_evt->snapshot_addr_phys, |
| (u64)(cpu_hw_evt->snapshot_addr_phys) >> 32, 0, 0, 0, 0); |
| else |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, |
| cpu_hw_evt->snapshot_addr_phys, 0, 0, 0, 0, 0); |
| |
| /* Free up the snapshot area memory and fall back to SBI PMU calls without snapshot */ |
| if (ret.error) { |
| if (ret.error != SBI_ERR_NOT_SUPPORTED) |
| pr_warn("pmu snapshot setup failed with error %ld\n", ret.error); |
| return sbi_err_map_linux_errno(ret.error); |
| } |
| |
| memset(cpu_hw_evt->snapshot_cval_shcopy, 0, sizeof(u64) * RISCV_MAX_COUNTERS); |
| cpu_hw_evt->snapshot_set_done = true; |
| |
| return 0; |
| } |
| |
| static u64 pmu_sbi_ctr_read(struct perf_event *event) |
| { |
| struct hw_perf_event *hwc = &event->hw; |
| int idx = hwc->idx; |
| struct sbiret ret; |
| u64 val = 0; |
| struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); |
| struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); |
| struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; |
| union sbi_pmu_ctr_info info = pmu_ctr_list[idx]; |
| |
| /* Read the value from the shared memory directly only if counter is stopped */ |
| if (sbi_pmu_snapshot_available() && (hwc->state & PERF_HES_STOPPED)) { |
| val = sdata->ctr_values[idx]; |
| return val; |
| } |
| |
| if (pmu_sbi_is_fw_event(event)) { |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ, |
| hwc->idx, 0, 0, 0, 0, 0); |
| if (ret.error) |
| return 0; |
| |
| val = ret.value; |
| if (IS_ENABLED(CONFIG_32BIT) && sbi_v2_available && info.width >= 32) { |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ_HI, |
| hwc->idx, 0, 0, 0, 0, 0); |
| if (!ret.error) |
| val |= ((u64)ret.value << 32); |
| else |
| WARN_ONCE(1, "Unable to read upper 32 bits of firmware counter error: %ld\n", |
| ret.error); |
| } |
| } else { |
| val = riscv_pmu_ctr_read_csr(info.csr); |
| if (IS_ENABLED(CONFIG_32BIT)) |
| val |= ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 32; |
| } |
| |
| return val; |
| } |
| |
| static void pmu_sbi_set_scounteren(void *arg) |
| { |
| struct perf_event *event = (struct perf_event *)arg; |
| |
| if (event->hw.idx != -1) |
| csr_write(CSR_SCOUNTEREN, |
| csr_read(CSR_SCOUNTEREN) | BIT(pmu_sbi_csr_index(event))); |
| } |
| |
| static void pmu_sbi_reset_scounteren(void *arg) |
| { |
| struct perf_event *event = (struct perf_event *)arg; |
| |
| if (event->hw.idx != -1) |
| csr_write(CSR_SCOUNTEREN, |
| csr_read(CSR_SCOUNTEREN) & ~BIT(pmu_sbi_csr_index(event))); |
| } |
| |
| static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival) |
| { |
| struct sbiret ret; |
| struct hw_perf_event *hwc = &event->hw; |
| unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; |
| |
| /* There is no benefit setting SNAPSHOT FLAG for a single counter */ |
| #if defined(CONFIG_32BIT) |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx, |
| 1, flag, ival, ival >> 32, 0); |
| #else |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx, |
| 1, flag, ival, 0, 0); |
| #endif |
| if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED)) |
| pr_err("Starting counter idx %d failed with error %d\n", |
| hwc->idx, sbi_err_map_linux_errno(ret.error)); |
| |
| if ((hwc->flags & PERF_EVENT_FLAG_USER_ACCESS) && |
| (hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)) |
| pmu_sbi_set_scounteren((void *)event); |
| } |
| |
| static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag) |
| { |
| struct sbiret ret; |
| struct hw_perf_event *hwc = &event->hw; |
| struct riscv_pmu *pmu = to_riscv_pmu(event->pmu); |
| struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); |
| struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; |
| |
| if ((hwc->flags & PERF_EVENT_FLAG_USER_ACCESS) && |
| (hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)) |
| pmu_sbi_reset_scounteren((void *)event); |
| |
| if (sbi_pmu_snapshot_available()) |
| flag |= SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; |
| |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0); |
| if (!ret.error && sbi_pmu_snapshot_available()) { |
| /* |
| * The counter snapshot is based on the index base specified by hwc->idx. |
| * The actual counter value is updated in shared memory at index 0 when counter |
| * mask is 0x01. To ensure accurate counter values, it's necessary to transfer |
| * the counter value to shared memory. However, if hwc->idx is zero, the counter |
| * value is already correctly updated in shared memory, requiring no further |
| * adjustment. |
| */ |
| if (hwc->idx > 0) { |
| sdata->ctr_values[hwc->idx] = sdata->ctr_values[0]; |
| sdata->ctr_values[0] = 0; |
| } |
| } else if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) && |
| flag != SBI_PMU_STOP_FLAG_RESET) { |
| pr_err("Stopping counter idx %d failed with error %d\n", |
| hwc->idx, sbi_err_map_linux_errno(ret.error)); |
| } |
| } |
| |
| static int pmu_sbi_find_num_ctrs(void) |
| { |
| struct sbiret ret; |
| |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_NUM_COUNTERS, 0, 0, 0, 0, 0, 0); |
| if (!ret.error) |
| return ret.value; |
| else |
| return sbi_err_map_linux_errno(ret.error); |
| } |
| |
| static int pmu_sbi_get_ctrinfo(int nctr, unsigned long *mask) |
| { |
| struct sbiret ret; |
| int i, num_hw_ctr = 0, num_fw_ctr = 0; |
| union sbi_pmu_ctr_info cinfo; |
| |
| pmu_ctr_list = kcalloc(nctr, sizeof(*pmu_ctr_list), GFP_KERNEL); |
| if (!pmu_ctr_list) |
| return -ENOMEM; |
| |
| for (i = 0; i < nctr; i++) { |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_GET_INFO, i, 0, 0, 0, 0, 0); |
| if (ret.error) |
| /* The logical counter ids are not expected to be contiguous */ |
| continue; |
| |
| *mask |= BIT(i); |
| |
| cinfo.value = ret.value; |
| if (cinfo.type == SBI_PMU_CTR_TYPE_FW) |
| num_fw_ctr++; |
| else |
| num_hw_ctr++; |
| pmu_ctr_list[i].value = cinfo.value; |
| } |
| |
| pr_info("%d firmware and %d hardware counters\n", num_fw_ctr, num_hw_ctr); |
| |
| return 0; |
| } |
| |
| static inline void pmu_sbi_stop_all(struct riscv_pmu *pmu) |
| { |
| /* |
| * No need to check the error because we are disabling all the counters |
| * which may include counters that are not enabled yet. |
| */ |
| sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, |
| 0, pmu->cmask, SBI_PMU_STOP_FLAG_RESET, 0, 0, 0); |
| } |
| |
| static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu) |
| { |
| struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); |
| struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; |
| unsigned long flag = 0; |
| int i, idx; |
| struct sbiret ret; |
| u64 temp_ctr_overflow_mask = 0; |
| |
| if (sbi_pmu_snapshot_available()) |
| flag = SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT; |
| |
| /* Reset the shadow copy to avoid save/restore any value from previous overflow */ |
| memset(cpu_hw_evt->snapshot_cval_shcopy, 0, sizeof(u64) * RISCV_MAX_COUNTERS); |
| |
| for (i = 0; i < BITS_TO_LONGS(RISCV_MAX_COUNTERS); i++) { |
| /* No need to check the error here as we can't do anything about the error */ |
| ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, i * BITS_PER_LONG, |
| cpu_hw_evt->used_hw_ctrs[i], flag, 0, 0, 0); |
| if (!ret.error && sbi_pmu_snapshot_available()) { |
| /* Save the counter values to avoid clobbering */ |
| for_each_set_bit(idx, &cpu_hw_evt->used_hw_ctrs[i], BITS_PER_LONG) |
| cpu_hw_evt->snapshot_cval_shcopy[i * BITS_PER_LONG + idx] = |
| sdata->ctr_values[idx]; |
| /* Save the overflow mask to avoid clobbering */ |
| temp_ctr_overflow_mask |= sdata->ctr_overflow_mask << (i * BITS_PER_LONG); |
| } |
| } |
| |
| /* Restore the counter values to the shared memory for used hw counters */ |
| if (sbi_pmu_snapshot_available()) { |
| for_each_set_bit(idx, cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS) |
| sdata->ctr_values[idx] = cpu_hw_evt->snapshot_cval_shcopy[idx]; |
| if (temp_ctr_overflow_mask) |
| sdata->ctr_overflow_mask = temp_ctr_overflow_mask; |
| } |
| } |
| |
| /* |
| * This function starts all the used counters in two step approach. |
| * Any counter that did not overflow can be start in a single step |
| * while the overflowed counters need to be started with updated initialization |
| * value. |
| */ |
| static inline void pmu_sbi_start_ovf_ctrs_sbi(struct cpu_hw_events *cpu_hw_evt, |
| u64 ctr_ovf_mask) |
| { |
| int idx = 0, i; |
| struct perf_event *event; |
| unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE; |
| unsigned long ctr_start_mask = 0; |
| uint64_t max_period; |
| struct hw_perf_event *hwc; |
| u64 init_val = 0; |
| |
| for (i = 0; i < BITS_TO_LONGS(RISCV_MAX_COUNTERS); i++) { |
| ctr_start_mask = cpu_hw_evt->used_hw_ctrs[i] & ~ctr_ovf_mask; |
| /* Start all the counters that did not overflow in a single shot */ |
| sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, i * BITS_PER_LONG, ctr_start_mask, |
| 0, 0, 0, 0); |
| } |
| |
| /* Reinitialize and start all the counter that overflowed */ |
| while (ctr_ovf_mask) { |
| if (ctr_ovf_mask & 0x01) { |
| event = cpu_hw_evt->events[idx]; |
| hwc = &event->hw; |
| max_period = riscv_pmu_ctr_get_width_mask(event); |
| init_val = local64_read(&hwc->prev_count) & max_period; |
| #if defined(CONFIG_32BIT) |
| sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx, 1, |
| flag, init_val, init_val >> 32, 0); |
| #else |
| sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx, 1, |
| flag, init_val, 0, 0); |
| #endif |
| perf_event_update_userpage(event); |
| } |
| ctr_ovf_mask = ctr_ovf_mask >> 1; |
| idx++; |
| } |
| } |
| |
| static inline void pmu_sbi_start_ovf_ctrs_snapshot(struct cpu_hw_events *cpu_hw_evt, |
| u64 ctr_ovf_mask) |
| { |
| int i, idx = 0; |
| struct perf_event *event; |
| unsigned long flag = SBI_PMU_START_FLAG_INIT_SNAPSHOT; |
| u64 max_period, init_val = 0; |
| struct hw_perf_event *hwc; |
| struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; |
| |
| for_each_set_bit(idx, cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS) { |
| if (ctr_ovf_mask & BIT(idx)) { |
| event = cpu_hw_evt->events[idx]; |
| hwc = &event->hw; |
| max_period = riscv_pmu_ctr_get_width_mask(event); |
| init_val = local64_read(&hwc->prev_count) & max_period; |
| cpu_hw_evt->snapshot_cval_shcopy[idx] = init_val; |
| } |
| /* |
| * We do not need to update the non-overflow counters the previous |
| * value should have been there already. |
| */ |
| } |
| |
| for (i = 0; i < BITS_TO_LONGS(RISCV_MAX_COUNTERS); i++) { |
| /* Restore the counter values to relative indices for used hw counters */ |
| for_each_set_bit(idx, &cpu_hw_evt->used_hw_ctrs[i], BITS_PER_LONG) |
| sdata->ctr_values[idx] = |
| cpu_hw_evt->snapshot_cval_shcopy[idx + i * BITS_PER_LONG]; |
| /* Start all the counters in a single shot */ |
| sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, idx * BITS_PER_LONG, |
| cpu_hw_evt->used_hw_ctrs[i], flag, 0, 0, 0); |
| } |
| } |
| |
| static void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu, |
| u64 ctr_ovf_mask) |
| { |
| struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); |
| |
| if (sbi_pmu_snapshot_available()) |
| pmu_sbi_start_ovf_ctrs_snapshot(cpu_hw_evt, ctr_ovf_mask); |
| else |
| pmu_sbi_start_ovf_ctrs_sbi(cpu_hw_evt, ctr_ovf_mask); |
| } |
| |
| static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev) |
| { |
| struct perf_sample_data data; |
| struct pt_regs *regs; |
| struct hw_perf_event *hw_evt; |
| union sbi_pmu_ctr_info *info; |
| int lidx, hidx, fidx; |
| struct riscv_pmu *pmu; |
| struct perf_event *event; |
| u64 overflow; |
| u64 overflowed_ctrs = 0; |
| struct cpu_hw_events *cpu_hw_evt = dev; |
| u64 start_clock = sched_clock(); |
| struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr; |
| |
| if (WARN_ON_ONCE(!cpu_hw_evt)) |
| return IRQ_NONE; |
| |
| /* Firmware counter don't support overflow yet */ |
| fidx = find_first_bit(cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS); |
| if (fidx == RISCV_MAX_COUNTERS) { |
| csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num)); |
| return IRQ_NONE; |
| } |
| |
| event = cpu_hw_evt->events[fidx]; |
| if (!event) { |
| ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask); |
| return IRQ_NONE; |
| } |
| |
| pmu = to_riscv_pmu(event->pmu); |
| pmu_sbi_stop_hw_ctrs(pmu); |
| |
| /* Overflow status register should only be read after counter are stopped */ |
| if (sbi_pmu_snapshot_available()) |
| overflow = sdata->ctr_overflow_mask; |
| else |
| ALT_SBI_PMU_OVERFLOW(overflow); |
| |
| /* |
| * Overflow interrupt pending bit should only be cleared after stopping |
| * all the counters to avoid any race condition. |
| */ |
| ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask); |
| |
| /* No overflow bit is set */ |
| if (!overflow) |
| return IRQ_NONE; |
| |
| regs = get_irq_regs(); |
| |
| for_each_set_bit(lidx, cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS) { |
| struct perf_event *event = cpu_hw_evt->events[lidx]; |
| |
| /* Skip if invalid event or user did not request a sampling */ |
| if (!event || !is_sampling_event(event)) |
| continue; |
| |
| info = &pmu_ctr_list[lidx]; |
| /* Do a sanity check */ |
| if (!info || info->type != SBI_PMU_CTR_TYPE_HW) |
| continue; |
| |
| if (sbi_pmu_snapshot_available()) |
| /* SBI implementation already updated the logical indicies */ |
| hidx = lidx; |
| else |
| /* compute hardware counter index */ |
| hidx = info->csr - CSR_CYCLE; |
| |
| /* check if the corresponding bit is set in sscountovf or overflow mask in shmem */ |
| if (!(overflow & BIT(hidx))) |
| continue; |
| |
| /* |
| * Keep a track of overflowed counters so that they can be started |
| * with updated initial value. |
| */ |
| overflowed_ctrs |= BIT(lidx); |
| hw_evt = &event->hw; |
| /* Update the event states here so that we know the state while reading */ |
| hw_evt->state |= PERF_HES_STOPPED; |
| riscv_pmu_event_update(event); |
| hw_evt->state |= PERF_HES_UPTODATE; |
| perf_sample_data_init(&data, 0, hw_evt->last_period); |
| if (riscv_pmu_event_set_period(event)) { |
| /* |
| * Unlike other ISAs, RISC-V don't have to disable interrupts |
| * to avoid throttling here. As per the specification, the |
| * interrupt remains disabled until the OF bit is set. |
| * Interrupts are enabled again only during the start. |
| * TODO: We will need to stop the guest counters once |
| * virtualization support is added. |
| */ |
| perf_event_overflow(event, &data, regs); |
| } |
| /* Reset the state as we are going to start the counter after the loop */ |
| hw_evt->state = 0; |
| } |
| |
| pmu_sbi_start_overflow_mask(pmu, overflowed_ctrs); |
| perf_sample_event_took(sched_clock() - start_clock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node) |
| { |
| struct riscv_pmu *pmu = hlist_entry_safe(node, struct riscv_pmu, node); |
| struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events); |
| |
| /* |
| * We keep enabling userspace access to CYCLE, TIME and INSTRET via the |
| * legacy option but that will be removed in the future. |
| */ |
| if (sysctl_perf_user_access == SYSCTL_LEGACY) |
| csr_write(CSR_SCOUNTEREN, 0x7); |
| else |
| csr_write(CSR_SCOUNTEREN, 0x2); |
| |
| /* Stop all the counters so that they can be enabled from perf */ |
| pmu_sbi_stop_all(pmu); |
| |
| if (riscv_pmu_use_irq) { |
| cpu_hw_evt->irq = riscv_pmu_irq; |
| ALT_SBI_PMU_OVF_CLEAR_PENDING(riscv_pmu_irq_mask); |
| enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE); |
| } |
| |
| if (sbi_pmu_snapshot_available()) |
| return pmu_sbi_snapshot_setup(pmu, cpu); |
| |
| return 0; |
| } |
| |
| static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node) |
| { |
| if (riscv_pmu_use_irq) { |
| disable_percpu_irq(riscv_pmu_irq); |
| } |
| |
| /* Disable all counters access for user mode now */ |
| csr_write(CSR_SCOUNTEREN, 0x0); |
| |
| if (sbi_pmu_snapshot_available()) |
| return pmu_sbi_snapshot_disable(); |
| |
| return 0; |
| } |
| |
| static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pdev) |
| { |
| int ret; |
| struct cpu_hw_events __percpu *hw_events = pmu->hw_events; |
| struct irq_domain *domain = NULL; |
| |
| if (riscv_isa_extension_available(NULL, SSCOFPMF)) { |
| riscv_pmu_irq_num = RV_IRQ_PMU; |
| riscv_pmu_use_irq = true; |
| } else if (IS_ENABLED(CONFIG_ERRATA_THEAD_PMU) && |
| riscv_cached_mvendorid(0) == THEAD_VENDOR_ID && |
| riscv_cached_marchid(0) == 0 && |
| riscv_cached_mimpid(0) == 0) { |
| riscv_pmu_irq_num = THEAD_C9XX_RV_IRQ_PMU; |
| riscv_pmu_use_irq = true; |
| } else if (riscv_has_vendor_extension_unlikely(ANDES_VENDOR_ID, |
| RISCV_ISA_VENDOR_EXT_XANDESPMU) && |
| IS_ENABLED(CONFIG_ANDES_CUSTOM_PMU)) { |
| riscv_pmu_irq_num = ANDES_SLI_CAUSE_BASE + ANDES_RV_IRQ_PMOVI; |
| riscv_pmu_use_irq = true; |
| } |
| |
| riscv_pmu_irq_mask = BIT(riscv_pmu_irq_num % BITS_PER_LONG); |
| |
| if (!riscv_pmu_use_irq) |
| return -EOPNOTSUPP; |
| |
| domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), |
| DOMAIN_BUS_ANY); |
| if (!domain) { |
| pr_err("Failed to find INTC IRQ root domain\n"); |
| return -ENODEV; |
| } |
| |
| riscv_pmu_irq = irq_create_mapping(domain, riscv_pmu_irq_num); |
| if (!riscv_pmu_irq) { |
| pr_err("Failed to map PMU interrupt for node\n"); |
| return -ENODEV; |
| } |
| |
| ret = request_percpu_irq(riscv_pmu_irq, pmu_sbi_ovf_handler, "riscv-pmu", hw_events); |
| if (ret) { |
| pr_err("registering percpu irq failed [%d]\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CPU_PM |
| static int riscv_pm_pmu_notify(struct notifier_block *b, unsigned long cmd, |
| void *v) |
| { |
| struct riscv_pmu *rvpmu = container_of(b, struct riscv_pmu, riscv_pm_nb); |
| struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events); |
| int enabled = bitmap_weight(cpuc->used_hw_ctrs, RISCV_MAX_COUNTERS); |
| struct perf_event *event; |
| int idx; |
| |
| if (!enabled) |
| return NOTIFY_OK; |
| |
| for (idx = 0; idx < RISCV_MAX_COUNTERS; idx++) { |
| event = cpuc->events[idx]; |
| if (!event) |
| continue; |
| |
| switch (cmd) { |
| case CPU_PM_ENTER: |
| /* |
| * Stop and update the counter |
| */ |
| riscv_pmu_stop(event, PERF_EF_UPDATE); |
| break; |
| case CPU_PM_EXIT: |
| case CPU_PM_ENTER_FAILED: |
| /* |
| * Restore and enable the counter. |
| */ |
| riscv_pmu_start(event, PERF_EF_RELOAD); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static int riscv_pm_pmu_register(struct riscv_pmu *pmu) |
| { |
| pmu->riscv_pm_nb.notifier_call = riscv_pm_pmu_notify; |
| return cpu_pm_register_notifier(&pmu->riscv_pm_nb); |
| } |
| |
| static void riscv_pm_pmu_unregister(struct riscv_pmu *pmu) |
| { |
| cpu_pm_unregister_notifier(&pmu->riscv_pm_nb); |
| } |
| #else |
| static inline int riscv_pm_pmu_register(struct riscv_pmu *pmu) { return 0; } |
| static inline void riscv_pm_pmu_unregister(struct riscv_pmu *pmu) { } |
| #endif |
| |
| static void riscv_pmu_destroy(struct riscv_pmu *pmu) |
| { |
| if (sbi_v2_available) { |
| if (sbi_pmu_snapshot_available()) { |
| pmu_sbi_snapshot_disable(); |
| pmu_sbi_snapshot_free(pmu); |
| } |
| } |
| riscv_pm_pmu_unregister(pmu); |
| cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); |
| } |
| |
| static void pmu_sbi_event_init(struct perf_event *event) |
| { |
| /* |
| * The permissions are set at event_init so that we do not depend |
| * on the sysctl value that can change. |
| */ |
| if (sysctl_perf_user_access == SYSCTL_NO_USER_ACCESS) |
| event->hw.flags |= PERF_EVENT_FLAG_NO_USER_ACCESS; |
| else if (sysctl_perf_user_access == SYSCTL_USER_ACCESS) |
| event->hw.flags |= PERF_EVENT_FLAG_USER_ACCESS; |
| else |
| event->hw.flags |= PERF_EVENT_FLAG_LEGACY; |
| } |
| |
| static void pmu_sbi_event_mapped(struct perf_event *event, struct mm_struct *mm) |
| { |
| if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS) |
| return; |
| |
| if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) { |
| if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES && |
| event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) { |
| return; |
| } |
| } |
| |
| /* |
| * The user mmapped the event to directly access it: this is where |
| * we determine based on sysctl_perf_user_access if we grant userspace |
| * the direct access to this event. That means that within the same |
| * task, some events may be directly accessible and some other may not, |
| * if the user changes the value of sysctl_perf_user_accesss in the |
| * meantime. |
| */ |
| |
| event->hw.flags |= PERF_EVENT_FLAG_USER_READ_CNT; |
| |
| /* |
| * We must enable userspace access *before* advertising in the user page |
| * that it is possible to do so to avoid any race. |
| * And we must notify all cpus here because threads that currently run |
| * on other cpus will try to directly access the counter too without |
| * calling pmu_sbi_ctr_start. |
| */ |
| if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS) |
| on_each_cpu_mask(mm_cpumask(mm), |
| pmu_sbi_set_scounteren, (void *)event, 1); |
| } |
| |
| static void pmu_sbi_event_unmapped(struct perf_event *event, struct mm_struct *mm) |
| { |
| if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS) |
| return; |
| |
| if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) { |
| if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES && |
| event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) { |
| return; |
| } |
| } |
| |
| /* |
| * Here we can directly remove user access since the user does not have |
| * access to the user page anymore so we avoid the racy window where the |
| * user could have read cap_user_rdpmc to true right before we disable |
| * it. |
| */ |
| event->hw.flags &= ~PERF_EVENT_FLAG_USER_READ_CNT; |
| |
| if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS) |
| on_each_cpu_mask(mm_cpumask(mm), |
| pmu_sbi_reset_scounteren, (void *)event, 1); |
| } |
| |
| static void riscv_pmu_update_counter_access(void *info) |
| { |
| if (sysctl_perf_user_access == SYSCTL_LEGACY) |
| csr_write(CSR_SCOUNTEREN, 0x7); |
| else |
| csr_write(CSR_SCOUNTEREN, 0x2); |
| } |
| |
| static int riscv_pmu_proc_user_access_handler(const struct ctl_table *table, |
| int write, void *buffer, |
| size_t *lenp, loff_t *ppos) |
| { |
| int prev = sysctl_perf_user_access; |
| int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos); |
| |
| /* |
| * Test against the previous value since we clear SCOUNTEREN when |
| * sysctl_perf_user_access is set to SYSCTL_USER_ACCESS, but we should |
| * not do that if that was already the case. |
| */ |
| if (ret || !write || prev == sysctl_perf_user_access) |
| return ret; |
| |
| on_each_cpu(riscv_pmu_update_counter_access, NULL, 1); |
| |
| return 0; |
| } |
| |
| static struct ctl_table sbi_pmu_sysctl_table[] = { |
| { |
| .procname = "perf_user_access", |
| .data = &sysctl_perf_user_access, |
| .maxlen = sizeof(unsigned int), |
| .mode = 0644, |
| .proc_handler = riscv_pmu_proc_user_access_handler, |
| .extra1 = SYSCTL_ZERO, |
| .extra2 = SYSCTL_TWO, |
| }, |
| }; |
| |
| static int pmu_sbi_device_probe(struct platform_device *pdev) |
| { |
| struct riscv_pmu *pmu = NULL; |
| int ret = -ENODEV; |
| int num_counters; |
| |
| pr_info("SBI PMU extension is available\n"); |
| pmu = riscv_pmu_alloc(); |
| if (!pmu) |
| return -ENOMEM; |
| |
| num_counters = pmu_sbi_find_num_ctrs(); |
| if (num_counters < 0) { |
| pr_err("SBI PMU extension doesn't provide any counters\n"); |
| goto out_free; |
| } |
| |
| /* It is possible to get from SBI more than max number of counters */ |
| if (num_counters > RISCV_MAX_COUNTERS) { |
| num_counters = RISCV_MAX_COUNTERS; |
| pr_info("SBI returned more than maximum number of counters. Limiting the number of counters to %d\n", num_counters); |
| } |
| |
| /* cache all the information about counters now */ |
| if (pmu_sbi_get_ctrinfo(num_counters, &cmask)) |
| goto out_free; |
| |
| ret = pmu_sbi_setup_irqs(pmu, pdev); |
| if (ret < 0) { |
| pr_info("Perf sampling/filtering is not supported as sscof extension is not available\n"); |
| pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; |
| pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE; |
| } |
| |
| pmu->pmu.attr_groups = riscv_pmu_attr_groups; |
| pmu->pmu.parent = &pdev->dev; |
| pmu->cmask = cmask; |
| pmu->ctr_start = pmu_sbi_ctr_start; |
| pmu->ctr_stop = pmu_sbi_ctr_stop; |
| pmu->event_map = pmu_sbi_event_map; |
| pmu->ctr_get_idx = pmu_sbi_ctr_get_idx; |
| pmu->ctr_get_width = pmu_sbi_ctr_get_width; |
| pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx; |
| pmu->ctr_read = pmu_sbi_ctr_read; |
| pmu->event_init = pmu_sbi_event_init; |
| pmu->event_mapped = pmu_sbi_event_mapped; |
| pmu->event_unmapped = pmu_sbi_event_unmapped; |
| pmu->csr_index = pmu_sbi_csr_index; |
| |
| ret = riscv_pm_pmu_register(pmu); |
| if (ret) |
| goto out_unregister; |
| |
| ret = perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW); |
| if (ret) |
| goto out_unregister; |
| |
| /* SBI PMU Snapsphot is only available in SBI v2.0 */ |
| if (sbi_v2_available) { |
| int cpu; |
| |
| ret = pmu_sbi_snapshot_alloc(pmu); |
| if (ret) |
| goto out_unregister; |
| |
| cpu = get_cpu(); |
| |
| ret = pmu_sbi_snapshot_setup(pmu, cpu); |
| if (ret) { |
| /* Snapshot is an optional feature. Continue if not available */ |
| pmu_sbi_snapshot_free(pmu); |
| } else { |
| pr_info("SBI PMU snapshot detected\n"); |
| /* |
| * We enable it once here for the boot cpu. If snapshot shmem setup |
| * fails during cpu hotplug process, it will fail to start the cpu |
| * as we can not handle hetergenous PMUs with different snapshot |
| * capability. |
| */ |
| static_branch_enable(&sbi_pmu_snapshot_available); |
| } |
| put_cpu(); |
| } |
| |
| register_sysctl("kernel", sbi_pmu_sysctl_table); |
| |
| ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node); |
| if (ret) |
| goto out_unregister; |
| |
| /* Asynchronously check which standard events are available */ |
| schedule_work(&check_std_events_work); |
| |
| return 0; |
| |
| out_unregister: |
| riscv_pmu_destroy(pmu); |
| |
| out_free: |
| kfree(pmu); |
| return ret; |
| } |
| |
| static struct platform_driver pmu_sbi_driver = { |
| .probe = pmu_sbi_device_probe, |
| .driver = { |
| .name = RISCV_PMU_SBI_PDEV_NAME, |
| }, |
| }; |
| |
| static int __init pmu_sbi_devinit(void) |
| { |
| int ret; |
| struct platform_device *pdev; |
| |
| if (sbi_spec_version < sbi_mk_version(0, 3) || |
| !sbi_probe_extension(SBI_EXT_PMU)) { |
| return 0; |
| } |
| |
| if (sbi_spec_version >= sbi_mk_version(2, 0)) |
| sbi_v2_available = true; |
| |
| ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING, |
| "perf/riscv/pmu:starting", |
| pmu_sbi_starting_cpu, pmu_sbi_dying_cpu); |
| if (ret) { |
| pr_err("CPU hotplug notifier could not be registered: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = platform_driver_register(&pmu_sbi_driver); |
| if (ret) |
| return ret; |
| |
| pdev = platform_device_register_simple(RISCV_PMU_SBI_PDEV_NAME, -1, NULL, 0); |
| if (IS_ERR(pdev)) { |
| platform_driver_unregister(&pmu_sbi_driver); |
| return PTR_ERR(pdev); |
| } |
| |
| /* Notify legacy implementation that SBI pmu is available*/ |
| riscv_pmu_legacy_skip_init(); |
| |
| return ret; |
| } |
| device_initcall(pmu_sbi_devinit) |