| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for IBM Power 842 compression accelerator |
| * |
| * Copyright (C) IBM Corporation, 2012 |
| * |
| * Authors: Robert Jennings <rcj@linux.vnet.ibm.com> |
| * Seth Jennings <sjenning@linux.vnet.ibm.com> |
| */ |
| |
| #include <asm/vio.h> |
| |
| #include "nx-842.h" |
| #include "nx_csbcpb.h" /* struct nx_csbcpb */ |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Robert Jennings <rcj@linux.vnet.ibm.com>"); |
| MODULE_DESCRIPTION("842 H/W Compression driver for IBM Power processors"); |
| MODULE_ALIAS_CRYPTO("842"); |
| MODULE_ALIAS_CRYPTO("842-nx"); |
| |
| static struct nx842_constraints nx842_pseries_constraints = { |
| .alignment = DDE_BUFFER_ALIGN, |
| .multiple = DDE_BUFFER_LAST_MULT, |
| .minimum = DDE_BUFFER_LAST_MULT, |
| .maximum = PAGE_SIZE, /* dynamic, max_sync_size */ |
| }; |
| |
| static int check_constraints(unsigned long buf, unsigned int *len, bool in) |
| { |
| if (!IS_ALIGNED(buf, nx842_pseries_constraints.alignment)) { |
| pr_debug("%s buffer 0x%lx not aligned to 0x%x\n", |
| in ? "input" : "output", buf, |
| nx842_pseries_constraints.alignment); |
| return -EINVAL; |
| } |
| if (*len % nx842_pseries_constraints.multiple) { |
| pr_debug("%s buffer len 0x%x not multiple of 0x%x\n", |
| in ? "input" : "output", *len, |
| nx842_pseries_constraints.multiple); |
| if (in) |
| return -EINVAL; |
| *len = round_down(*len, nx842_pseries_constraints.multiple); |
| } |
| if (*len < nx842_pseries_constraints.minimum) { |
| pr_debug("%s buffer len 0x%x under minimum 0x%x\n", |
| in ? "input" : "output", *len, |
| nx842_pseries_constraints.minimum); |
| return -EINVAL; |
| } |
| if (*len > nx842_pseries_constraints.maximum) { |
| pr_debug("%s buffer len 0x%x over maximum 0x%x\n", |
| in ? "input" : "output", *len, |
| nx842_pseries_constraints.maximum); |
| if (in) |
| return -EINVAL; |
| *len = nx842_pseries_constraints.maximum; |
| } |
| return 0; |
| } |
| |
| /* I assume we need to align the CSB? */ |
| #define WORKMEM_ALIGN (256) |
| |
| struct nx842_workmem { |
| /* scatterlist */ |
| char slin[4096]; |
| char slout[4096]; |
| /* coprocessor status/parameter block */ |
| struct nx_csbcpb csbcpb; |
| |
| char padding[WORKMEM_ALIGN]; |
| } __aligned(WORKMEM_ALIGN); |
| |
| /* Macros for fields within nx_csbcpb */ |
| /* Check the valid bit within the csbcpb valid field */ |
| #define NX842_CSBCBP_VALID_CHK(x) (x & BIT_MASK(7)) |
| |
| /* CE macros operate on the completion_extension field bits in the csbcpb. |
| * CE0 0=full completion, 1=partial completion |
| * CE1 0=CE0 indicates completion, 1=termination (output may be modified) |
| * CE2 0=processed_bytes is source bytes, 1=processed_bytes is target bytes */ |
| #define NX842_CSBCPB_CE0(x) (x & BIT_MASK(7)) |
| #define NX842_CSBCPB_CE1(x) (x & BIT_MASK(6)) |
| #define NX842_CSBCPB_CE2(x) (x & BIT_MASK(5)) |
| |
| /* The NX unit accepts data only on 4K page boundaries */ |
| #define NX842_HW_PAGE_SIZE (4096) |
| #define NX842_HW_PAGE_MASK (~(NX842_HW_PAGE_SIZE-1)) |
| |
| struct ibm_nx842_counters { |
| atomic64_t comp_complete; |
| atomic64_t comp_failed; |
| atomic64_t decomp_complete; |
| atomic64_t decomp_failed; |
| atomic64_t swdecomp; |
| atomic64_t comp_times[32]; |
| atomic64_t decomp_times[32]; |
| }; |
| |
| static struct nx842_devdata { |
| struct vio_dev *vdev; |
| struct device *dev; |
| struct ibm_nx842_counters *counters; |
| unsigned int max_sg_len; |
| unsigned int max_sync_size; |
| unsigned int max_sync_sg; |
| } __rcu *devdata; |
| static DEFINE_SPINLOCK(devdata_mutex); |
| |
| #define NX842_COUNTER_INC(_x) \ |
| static inline void nx842_inc_##_x( \ |
| const struct nx842_devdata *dev) { \ |
| if (dev) \ |
| atomic64_inc(&dev->counters->_x); \ |
| } |
| NX842_COUNTER_INC(comp_complete); |
| NX842_COUNTER_INC(comp_failed); |
| NX842_COUNTER_INC(decomp_complete); |
| NX842_COUNTER_INC(decomp_failed); |
| NX842_COUNTER_INC(swdecomp); |
| |
| #define NX842_HIST_SLOTS 16 |
| |
| static void ibm_nx842_incr_hist(atomic64_t *times, unsigned int time) |
| { |
| int bucket = fls(time); |
| |
| if (bucket) |
| bucket = min((NX842_HIST_SLOTS - 1), bucket - 1); |
| |
| atomic64_inc(×[bucket]); |
| } |
| |
| /* NX unit operation flags */ |
| #define NX842_OP_COMPRESS 0x0 |
| #define NX842_OP_CRC 0x1 |
| #define NX842_OP_DECOMPRESS 0x2 |
| #define NX842_OP_COMPRESS_CRC (NX842_OP_COMPRESS | NX842_OP_CRC) |
| #define NX842_OP_DECOMPRESS_CRC (NX842_OP_DECOMPRESS | NX842_OP_CRC) |
| #define NX842_OP_ASYNC (1<<23) |
| #define NX842_OP_NOTIFY (1<<22) |
| #define NX842_OP_NOTIFY_INT(x) ((x & 0xff)<<8) |
| |
| static unsigned long nx842_get_desired_dma(struct vio_dev *viodev) |
| { |
| /* No use of DMA mappings within the driver. */ |
| return 0; |
| } |
| |
| struct nx842_slentry { |
| __be64 ptr; /* Real address (use __pa()) */ |
| __be64 len; |
| }; |
| |
| /* pHyp scatterlist entry */ |
| struct nx842_scatterlist { |
| int entry_nr; /* number of slentries */ |
| struct nx842_slentry *entries; /* ptr to array of slentries */ |
| }; |
| |
| /* Does not include sizeof(entry_nr) in the size */ |
| static inline unsigned long nx842_get_scatterlist_size( |
| struct nx842_scatterlist *sl) |
| { |
| return sl->entry_nr * sizeof(struct nx842_slentry); |
| } |
| |
| static int nx842_build_scatterlist(unsigned long buf, int len, |
| struct nx842_scatterlist *sl) |
| { |
| unsigned long entrylen; |
| struct nx842_slentry *entry; |
| |
| sl->entry_nr = 0; |
| |
| entry = sl->entries; |
| while (len) { |
| entry->ptr = cpu_to_be64(nx842_get_pa((void *)buf)); |
| entrylen = min_t(int, len, |
| LEN_ON_SIZE(buf, NX842_HW_PAGE_SIZE)); |
| entry->len = cpu_to_be64(entrylen); |
| |
| len -= entrylen; |
| buf += entrylen; |
| |
| sl->entry_nr++; |
| entry++; |
| } |
| |
| return 0; |
| } |
| |
| static int nx842_validate_result(struct device *dev, |
| struct cop_status_block *csb) |
| { |
| /* The csb must be valid after returning from vio_h_cop_sync */ |
| if (!NX842_CSBCBP_VALID_CHK(csb->valid)) { |
| dev_err(dev, "%s: cspcbp not valid upon completion.\n", |
| __func__); |
| dev_dbg(dev, "valid:0x%02x cs:0x%02x cc:0x%02x ce:0x%02x\n", |
| csb->valid, |
| csb->crb_seq_number, |
| csb->completion_code, |
| csb->completion_extension); |
| dev_dbg(dev, "processed_bytes:%d address:0x%016lx\n", |
| be32_to_cpu(csb->processed_byte_count), |
| (unsigned long)be64_to_cpu(csb->address)); |
| return -EIO; |
| } |
| |
| /* Check return values from the hardware in the CSB */ |
| switch (csb->completion_code) { |
| case 0: /* Completed without error */ |
| break; |
| case 64: /* Compression ok, but output larger than input */ |
| dev_dbg(dev, "%s: output size larger than input size\n", |
| __func__); |
| break; |
| case 13: /* Output buffer too small */ |
| dev_dbg(dev, "%s: Out of space in output buffer\n", |
| __func__); |
| return -ENOSPC; |
| case 65: /* Calculated CRC doesn't match the passed value */ |
| dev_dbg(dev, "%s: CRC mismatch for decompression\n", |
| __func__); |
| return -EINVAL; |
| case 66: /* Input data contains an illegal template field */ |
| case 67: /* Template indicates data past the end of the input stream */ |
| dev_dbg(dev, "%s: Bad data for decompression (code:%d)\n", |
| __func__, csb->completion_code); |
| return -EINVAL; |
| default: |
| dev_dbg(dev, "%s: Unspecified error (code:%d)\n", |
| __func__, csb->completion_code); |
| return -EIO; |
| } |
| |
| /* Hardware sanity check */ |
| if (!NX842_CSBCPB_CE2(csb->completion_extension)) { |
| dev_err(dev, "%s: No error returned by hardware, but " |
| "data returned is unusable, contact support.\n" |
| "(Additional info: csbcbp->processed bytes " |
| "does not specify processed bytes for the " |
| "target buffer.)\n", __func__); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * nx842_pseries_compress - Compress data using the 842 algorithm |
| * |
| * Compression provide by the NX842 coprocessor on IBM Power systems. |
| * The input buffer is compressed and the result is stored in the |
| * provided output buffer. |
| * |
| * Upon return from this function @outlen contains the length of the |
| * compressed data. If there is an error then @outlen will be 0 and an |
| * error will be specified by the return code from this function. |
| * |
| * @in: Pointer to input buffer |
| * @inlen: Length of input buffer |
| * @out: Pointer to output buffer |
| * @outlen: Length of output buffer |
| * @wrkmem: ptr to buffer for working memory, size determined by |
| * nx842_pseries_driver.workmem_size |
| * |
| * Returns: |
| * 0 Success, output of length @outlen stored in the buffer at @out |
| * -ENOMEM Unable to allocate internal buffers |
| * -ENOSPC Output buffer is to small |
| * -EIO Internal error |
| * -ENODEV Hardware unavailable |
| */ |
| static int nx842_pseries_compress(const unsigned char *in, unsigned int inlen, |
| unsigned char *out, unsigned int *outlen, |
| void *wmem) |
| { |
| struct nx842_devdata *local_devdata; |
| struct device *dev = NULL; |
| struct nx842_workmem *workmem; |
| struct nx842_scatterlist slin, slout; |
| struct nx_csbcpb *csbcpb; |
| int ret = 0; |
| unsigned long inbuf, outbuf; |
| struct vio_pfo_op op = { |
| .done = NULL, |
| .handle = 0, |
| .timeout = 0, |
| }; |
| unsigned long start = get_tb(); |
| |
| inbuf = (unsigned long)in; |
| if (check_constraints(inbuf, &inlen, true)) |
| return -EINVAL; |
| |
| outbuf = (unsigned long)out; |
| if (check_constraints(outbuf, outlen, false)) |
| return -EINVAL; |
| |
| rcu_read_lock(); |
| local_devdata = rcu_dereference(devdata); |
| if (!local_devdata || !local_devdata->dev) { |
| rcu_read_unlock(); |
| return -ENODEV; |
| } |
| dev = local_devdata->dev; |
| |
| /* Init scatterlist */ |
| workmem = PTR_ALIGN(wmem, WORKMEM_ALIGN); |
| slin.entries = (struct nx842_slentry *)workmem->slin; |
| slout.entries = (struct nx842_slentry *)workmem->slout; |
| |
| /* Init operation */ |
| op.flags = NX842_OP_COMPRESS_CRC; |
| csbcpb = &workmem->csbcpb; |
| memset(csbcpb, 0, sizeof(*csbcpb)); |
| op.csbcpb = nx842_get_pa(csbcpb); |
| |
| if ((inbuf & NX842_HW_PAGE_MASK) == |
| ((inbuf + inlen - 1) & NX842_HW_PAGE_MASK)) { |
| /* Create direct DDE */ |
| op.in = nx842_get_pa((void *)inbuf); |
| op.inlen = inlen; |
| } else { |
| /* Create indirect DDE (scatterlist) */ |
| nx842_build_scatterlist(inbuf, inlen, &slin); |
| op.in = nx842_get_pa(slin.entries); |
| op.inlen = -nx842_get_scatterlist_size(&slin); |
| } |
| |
| if ((outbuf & NX842_HW_PAGE_MASK) == |
| ((outbuf + *outlen - 1) & NX842_HW_PAGE_MASK)) { |
| /* Create direct DDE */ |
| op.out = nx842_get_pa((void *)outbuf); |
| op.outlen = *outlen; |
| } else { |
| /* Create indirect DDE (scatterlist) */ |
| nx842_build_scatterlist(outbuf, *outlen, &slout); |
| op.out = nx842_get_pa(slout.entries); |
| op.outlen = -nx842_get_scatterlist_size(&slout); |
| } |
| |
| dev_dbg(dev, "%s: op.in %lx op.inlen %ld op.out %lx op.outlen %ld\n", |
| __func__, (unsigned long)op.in, (long)op.inlen, |
| (unsigned long)op.out, (long)op.outlen); |
| |
| /* Send request to pHyp */ |
| ret = vio_h_cop_sync(local_devdata->vdev, &op); |
| |
| /* Check for pHyp error */ |
| if (ret) { |
| dev_dbg(dev, "%s: vio_h_cop_sync error (ret=%d, hret=%ld)\n", |
| __func__, ret, op.hcall_err); |
| ret = -EIO; |
| goto unlock; |
| } |
| |
| /* Check for hardware error */ |
| ret = nx842_validate_result(dev, &csbcpb->csb); |
| if (ret) |
| goto unlock; |
| |
| *outlen = be32_to_cpu(csbcpb->csb.processed_byte_count); |
| dev_dbg(dev, "%s: processed_bytes=%d\n", __func__, *outlen); |
| |
| unlock: |
| if (ret) |
| nx842_inc_comp_failed(local_devdata); |
| else { |
| nx842_inc_comp_complete(local_devdata); |
| ibm_nx842_incr_hist(local_devdata->counters->comp_times, |
| (get_tb() - start) / tb_ticks_per_usec); |
| } |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /** |
| * nx842_pseries_decompress - Decompress data using the 842 algorithm |
| * |
| * Decompression provide by the NX842 coprocessor on IBM Power systems. |
| * The input buffer is decompressed and the result is stored in the |
| * provided output buffer. The size allocated to the output buffer is |
| * provided by the caller of this function in @outlen. Upon return from |
| * this function @outlen contains the length of the decompressed data. |
| * If there is an error then @outlen will be 0 and an error will be |
| * specified by the return code from this function. |
| * |
| * @in: Pointer to input buffer |
| * @inlen: Length of input buffer |
| * @out: Pointer to output buffer |
| * @outlen: Length of output buffer |
| * @wrkmem: ptr to buffer for working memory, size determined by |
| * nx842_pseries_driver.workmem_size |
| * |
| * Returns: |
| * 0 Success, output of length @outlen stored in the buffer at @out |
| * -ENODEV Hardware decompression device is unavailable |
| * -ENOMEM Unable to allocate internal buffers |
| * -ENOSPC Output buffer is to small |
| * -EINVAL Bad input data encountered when attempting decompress |
| * -EIO Internal error |
| */ |
| static int nx842_pseries_decompress(const unsigned char *in, unsigned int inlen, |
| unsigned char *out, unsigned int *outlen, |
| void *wmem) |
| { |
| struct nx842_devdata *local_devdata; |
| struct device *dev = NULL; |
| struct nx842_workmem *workmem; |
| struct nx842_scatterlist slin, slout; |
| struct nx_csbcpb *csbcpb; |
| int ret = 0; |
| unsigned long inbuf, outbuf; |
| struct vio_pfo_op op = { |
| .done = NULL, |
| .handle = 0, |
| .timeout = 0, |
| }; |
| unsigned long start = get_tb(); |
| |
| /* Ensure page alignment and size */ |
| inbuf = (unsigned long)in; |
| if (check_constraints(inbuf, &inlen, true)) |
| return -EINVAL; |
| |
| outbuf = (unsigned long)out; |
| if (check_constraints(outbuf, outlen, false)) |
| return -EINVAL; |
| |
| rcu_read_lock(); |
| local_devdata = rcu_dereference(devdata); |
| if (!local_devdata || !local_devdata->dev) { |
| rcu_read_unlock(); |
| return -ENODEV; |
| } |
| dev = local_devdata->dev; |
| |
| workmem = PTR_ALIGN(wmem, WORKMEM_ALIGN); |
| |
| /* Init scatterlist */ |
| slin.entries = (struct nx842_slentry *)workmem->slin; |
| slout.entries = (struct nx842_slentry *)workmem->slout; |
| |
| /* Init operation */ |
| op.flags = NX842_OP_DECOMPRESS_CRC; |
| csbcpb = &workmem->csbcpb; |
| memset(csbcpb, 0, sizeof(*csbcpb)); |
| op.csbcpb = nx842_get_pa(csbcpb); |
| |
| if ((inbuf & NX842_HW_PAGE_MASK) == |
| ((inbuf + inlen - 1) & NX842_HW_PAGE_MASK)) { |
| /* Create direct DDE */ |
| op.in = nx842_get_pa((void *)inbuf); |
| op.inlen = inlen; |
| } else { |
| /* Create indirect DDE (scatterlist) */ |
| nx842_build_scatterlist(inbuf, inlen, &slin); |
| op.in = nx842_get_pa(slin.entries); |
| op.inlen = -nx842_get_scatterlist_size(&slin); |
| } |
| |
| if ((outbuf & NX842_HW_PAGE_MASK) == |
| ((outbuf + *outlen - 1) & NX842_HW_PAGE_MASK)) { |
| /* Create direct DDE */ |
| op.out = nx842_get_pa((void *)outbuf); |
| op.outlen = *outlen; |
| } else { |
| /* Create indirect DDE (scatterlist) */ |
| nx842_build_scatterlist(outbuf, *outlen, &slout); |
| op.out = nx842_get_pa(slout.entries); |
| op.outlen = -nx842_get_scatterlist_size(&slout); |
| } |
| |
| dev_dbg(dev, "%s: op.in %lx op.inlen %ld op.out %lx op.outlen %ld\n", |
| __func__, (unsigned long)op.in, (long)op.inlen, |
| (unsigned long)op.out, (long)op.outlen); |
| |
| /* Send request to pHyp */ |
| ret = vio_h_cop_sync(local_devdata->vdev, &op); |
| |
| /* Check for pHyp error */ |
| if (ret) { |
| dev_dbg(dev, "%s: vio_h_cop_sync error (ret=%d, hret=%ld)\n", |
| __func__, ret, op.hcall_err); |
| goto unlock; |
| } |
| |
| /* Check for hardware error */ |
| ret = nx842_validate_result(dev, &csbcpb->csb); |
| if (ret) |
| goto unlock; |
| |
| *outlen = be32_to_cpu(csbcpb->csb.processed_byte_count); |
| |
| unlock: |
| if (ret) |
| /* decompress fail */ |
| nx842_inc_decomp_failed(local_devdata); |
| else { |
| nx842_inc_decomp_complete(local_devdata); |
| ibm_nx842_incr_hist(local_devdata->counters->decomp_times, |
| (get_tb() - start) / tb_ticks_per_usec); |
| } |
| |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /** |
| * nx842_OF_set_defaults -- Set default (disabled) values for devdata |
| * |
| * @devdata - struct nx842_devdata to update |
| * |
| * Returns: |
| * 0 on success |
| * -ENOENT if @devdata ptr is NULL |
| */ |
| static int nx842_OF_set_defaults(struct nx842_devdata *devdata) |
| { |
| if (devdata) { |
| devdata->max_sync_size = 0; |
| devdata->max_sync_sg = 0; |
| devdata->max_sg_len = 0; |
| return 0; |
| } else |
| return -ENOENT; |
| } |
| |
| /** |
| * nx842_OF_upd_status -- Check the device info from OF status prop |
| * |
| * The status property indicates if the accelerator is enabled. If the |
| * device is in the OF tree it indicates that the hardware is present. |
| * The status field indicates if the device is enabled when the status |
| * is 'okay'. Otherwise the device driver will be disabled. |
| * |
| * @devdata: struct nx842_devdata to use for dev_info |
| * @prop: struct property point containing the maxsyncop for the update |
| * |
| * Returns: |
| * 0 - Device is available |
| * -ENODEV - Device is not available |
| */ |
| static int nx842_OF_upd_status(struct nx842_devdata *devdata, |
| struct property *prop) |
| { |
| const char *status = (const char *)prop->value; |
| |
| if (!strncmp(status, "okay", (size_t)prop->length)) |
| return 0; |
| if (!strncmp(status, "disabled", (size_t)prop->length)) |
| return -ENODEV; |
| dev_info(devdata->dev, "%s: unknown status '%s'\n", __func__, status); |
| |
| return -EINVAL; |
| } |
| |
| /** |
| * nx842_OF_upd_maxsglen -- Update the device info from OF maxsglen prop |
| * |
| * Definition of the 'ibm,max-sg-len' OF property: |
| * This field indicates the maximum byte length of a scatter list |
| * for the platform facility. It is a single cell encoded as with encode-int. |
| * |
| * Example: |
| * # od -x ibm,max-sg-len |
| * 0000000 0000 0ff0 |
| * |
| * In this example, the maximum byte length of a scatter list is |
| * 0x0ff0 (4,080). |
| * |
| * @devdata - struct nx842_devdata to update |
| * @prop - struct property point containing the maxsyncop for the update |
| * |
| * Returns: |
| * 0 on success |
| * -EINVAL on failure |
| */ |
| static int nx842_OF_upd_maxsglen(struct nx842_devdata *devdata, |
| struct property *prop) { |
| int ret = 0; |
| const unsigned int maxsglen = of_read_number(prop->value, 1); |
| |
| if (prop->length != sizeof(maxsglen)) { |
| dev_err(devdata->dev, "%s: unexpected format for ibm,max-sg-len property\n", __func__); |
| dev_dbg(devdata->dev, "%s: ibm,max-sg-len is %d bytes long, expected %lu bytes\n", __func__, |
| prop->length, sizeof(maxsglen)); |
| ret = -EINVAL; |
| } else { |
| devdata->max_sg_len = min_t(unsigned int, |
| maxsglen, NX842_HW_PAGE_SIZE); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * nx842_OF_upd_maxsyncop -- Update the device info from OF maxsyncop prop |
| * |
| * Definition of the 'ibm,max-sync-cop' OF property: |
| * Two series of cells. The first series of cells represents the maximums |
| * that can be synchronously compressed. The second series of cells |
| * represents the maximums that can be synchronously decompressed. |
| * 1. The first cell in each series contains the count of the number of |
| * data length, scatter list elements pairs that follow – each being |
| * of the form |
| * a. One cell data byte length |
| * b. One cell total number of scatter list elements |
| * |
| * Example: |
| * # od -x ibm,max-sync-cop |
| * 0000000 0000 0001 0000 1000 0000 01fe 0000 0001 |
| * 0000020 0000 1000 0000 01fe |
| * |
| * In this example, compression supports 0x1000 (4,096) data byte length |
| * and 0x1fe (510) total scatter list elements. Decompression supports |
| * 0x1000 (4,096) data byte length and 0x1f3 (510) total scatter list |
| * elements. |
| * |
| * @devdata - struct nx842_devdata to update |
| * @prop - struct property point containing the maxsyncop for the update |
| * |
| * Returns: |
| * 0 on success |
| * -EINVAL on failure |
| */ |
| static int nx842_OF_upd_maxsyncop(struct nx842_devdata *devdata, |
| struct property *prop) { |
| int ret = 0; |
| unsigned int comp_data_limit, decomp_data_limit; |
| unsigned int comp_sg_limit, decomp_sg_limit; |
| const struct maxsynccop_t { |
| __be32 comp_elements; |
| __be32 comp_data_limit; |
| __be32 comp_sg_limit; |
| __be32 decomp_elements; |
| __be32 decomp_data_limit; |
| __be32 decomp_sg_limit; |
| } *maxsynccop; |
| |
| if (prop->length != sizeof(*maxsynccop)) { |
| dev_err(devdata->dev, "%s: unexpected format for ibm,max-sync-cop property\n", __func__); |
| dev_dbg(devdata->dev, "%s: ibm,max-sync-cop is %d bytes long, expected %lu bytes\n", __func__, prop->length, |
| sizeof(*maxsynccop)); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| maxsynccop = (const struct maxsynccop_t *)prop->value; |
| comp_data_limit = be32_to_cpu(maxsynccop->comp_data_limit); |
| comp_sg_limit = be32_to_cpu(maxsynccop->comp_sg_limit); |
| decomp_data_limit = be32_to_cpu(maxsynccop->decomp_data_limit); |
| decomp_sg_limit = be32_to_cpu(maxsynccop->decomp_sg_limit); |
| |
| /* Use one limit rather than separate limits for compression and |
| * decompression. Set a maximum for this so as not to exceed the |
| * size that the header can support and round the value down to |
| * the hardware page size (4K) */ |
| devdata->max_sync_size = min(comp_data_limit, decomp_data_limit); |
| |
| devdata->max_sync_size = min_t(unsigned int, devdata->max_sync_size, |
| 65536); |
| |
| if (devdata->max_sync_size < 4096) { |
| dev_err(devdata->dev, "%s: hardware max data size (%u) is " |
| "less than the driver minimum, unable to use " |
| "the hardware device\n", |
| __func__, devdata->max_sync_size); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| nx842_pseries_constraints.maximum = devdata->max_sync_size; |
| |
| devdata->max_sync_sg = min(comp_sg_limit, decomp_sg_limit); |
| if (devdata->max_sync_sg < 1) { |
| dev_err(devdata->dev, "%s: hardware max sg size (%u) is " |
| "less than the driver minimum, unable to use " |
| "the hardware device\n", |
| __func__, devdata->max_sync_sg); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * |
| * nx842_OF_upd -- Handle OF properties updates for the device. |
| * |
| * Set all properties from the OF tree. Optionally, a new property |
| * can be provided by the @new_prop pointer to overwrite an existing value. |
| * The device will remain disabled until all values are valid, this function |
| * will return an error for updates unless all values are valid. |
| * |
| * @new_prop: If not NULL, this property is being updated. If NULL, update |
| * all properties from the current values in the OF tree. |
| * |
| * Returns: |
| * 0 - Success |
| * -ENOMEM - Could not allocate memory for new devdata structure |
| * -EINVAL - property value not found, new_prop is not a recognized |
| * property for the device or property value is not valid. |
| * -ENODEV - Device is not available |
| */ |
| static int nx842_OF_upd(struct property *new_prop) |
| { |
| struct nx842_devdata *old_devdata = NULL; |
| struct nx842_devdata *new_devdata = NULL; |
| struct device_node *of_node = NULL; |
| struct property *status = NULL; |
| struct property *maxsglen = NULL; |
| struct property *maxsyncop = NULL; |
| int ret = 0; |
| unsigned long flags; |
| |
| new_devdata = kzalloc(sizeof(*new_devdata), GFP_NOFS); |
| if (!new_devdata) |
| return -ENOMEM; |
| |
| spin_lock_irqsave(&devdata_mutex, flags); |
| old_devdata = rcu_dereference_check(devdata, |
| lockdep_is_held(&devdata_mutex)); |
| if (old_devdata) |
| of_node = old_devdata->dev->of_node; |
| |
| if (!old_devdata || !of_node) { |
| pr_err("%s: device is not available\n", __func__); |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| kfree(new_devdata); |
| return -ENODEV; |
| } |
| |
| memcpy(new_devdata, old_devdata, sizeof(*old_devdata)); |
| new_devdata->counters = old_devdata->counters; |
| |
| /* Set ptrs for existing properties */ |
| status = of_find_property(of_node, "status", NULL); |
| maxsglen = of_find_property(of_node, "ibm,max-sg-len", NULL); |
| maxsyncop = of_find_property(of_node, "ibm,max-sync-cop", NULL); |
| if (!status || !maxsglen || !maxsyncop) { |
| dev_err(old_devdata->dev, "%s: Could not locate device properties\n", __func__); |
| ret = -EINVAL; |
| goto error_out; |
| } |
| |
| /* |
| * If this is a property update, there are only certain properties that |
| * we care about. Bail if it isn't in the below list |
| */ |
| if (new_prop && (strncmp(new_prop->name, "status", new_prop->length) || |
| strncmp(new_prop->name, "ibm,max-sg-len", new_prop->length) || |
| strncmp(new_prop->name, "ibm,max-sync-cop", new_prop->length))) |
| goto out; |
| |
| /* Perform property updates */ |
| ret = nx842_OF_upd_status(new_devdata, status); |
| if (ret) |
| goto error_out; |
| |
| ret = nx842_OF_upd_maxsglen(new_devdata, maxsglen); |
| if (ret) |
| goto error_out; |
| |
| ret = nx842_OF_upd_maxsyncop(new_devdata, maxsyncop); |
| if (ret) |
| goto error_out; |
| |
| out: |
| dev_info(old_devdata->dev, "%s: max_sync_size new:%u old:%u\n", |
| __func__, new_devdata->max_sync_size, |
| old_devdata->max_sync_size); |
| dev_info(old_devdata->dev, "%s: max_sync_sg new:%u old:%u\n", |
| __func__, new_devdata->max_sync_sg, |
| old_devdata->max_sync_sg); |
| dev_info(old_devdata->dev, "%s: max_sg_len new:%u old:%u\n", |
| __func__, new_devdata->max_sg_len, |
| old_devdata->max_sg_len); |
| |
| rcu_assign_pointer(devdata, new_devdata); |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| synchronize_rcu(); |
| dev_set_drvdata(new_devdata->dev, new_devdata); |
| kfree(old_devdata); |
| return 0; |
| |
| error_out: |
| if (new_devdata) { |
| dev_info(old_devdata->dev, "%s: device disabled\n", __func__); |
| nx842_OF_set_defaults(new_devdata); |
| rcu_assign_pointer(devdata, new_devdata); |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| synchronize_rcu(); |
| dev_set_drvdata(new_devdata->dev, new_devdata); |
| kfree(old_devdata); |
| } else { |
| dev_err(old_devdata->dev, "%s: could not update driver from hardware\n", __func__); |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| } |
| |
| if (!ret) |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| /** |
| * nx842_OF_notifier - Process updates to OF properties for the device |
| * |
| * @np: notifier block |
| * @action: notifier action |
| * @update: struct pSeries_reconfig_prop_update pointer if action is |
| * PSERIES_UPDATE_PROPERTY |
| * |
| * Returns: |
| * NOTIFY_OK on success |
| * NOTIFY_BAD encoded with error number on failure, use |
| * notifier_to_errno() to decode this value |
| */ |
| static int nx842_OF_notifier(struct notifier_block *np, unsigned long action, |
| void *data) |
| { |
| struct of_reconfig_data *upd = data; |
| struct nx842_devdata *local_devdata; |
| struct device_node *node = NULL; |
| |
| rcu_read_lock(); |
| local_devdata = rcu_dereference(devdata); |
| if (local_devdata) |
| node = local_devdata->dev->of_node; |
| |
| if (local_devdata && |
| action == OF_RECONFIG_UPDATE_PROPERTY && |
| !strcmp(upd->dn->name, node->name)) { |
| rcu_read_unlock(); |
| nx842_OF_upd(upd->prop); |
| } else |
| rcu_read_unlock(); |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block nx842_of_nb = { |
| .notifier_call = nx842_OF_notifier, |
| }; |
| |
| #define nx842_counter_read(_name) \ |
| static ssize_t nx842_##_name##_show(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) { \ |
| struct nx842_devdata *local_devdata; \ |
| int p = 0; \ |
| rcu_read_lock(); \ |
| local_devdata = rcu_dereference(devdata); \ |
| if (local_devdata) \ |
| p = snprintf(buf, PAGE_SIZE, "%lld\n", \ |
| atomic64_read(&local_devdata->counters->_name)); \ |
| rcu_read_unlock(); \ |
| return p; \ |
| } |
| |
| #define NX842DEV_COUNTER_ATTR_RO(_name) \ |
| nx842_counter_read(_name); \ |
| static struct device_attribute dev_attr_##_name = __ATTR(_name, \ |
| 0444, \ |
| nx842_##_name##_show,\ |
| NULL); |
| |
| NX842DEV_COUNTER_ATTR_RO(comp_complete); |
| NX842DEV_COUNTER_ATTR_RO(comp_failed); |
| NX842DEV_COUNTER_ATTR_RO(decomp_complete); |
| NX842DEV_COUNTER_ATTR_RO(decomp_failed); |
| NX842DEV_COUNTER_ATTR_RO(swdecomp); |
| |
| static ssize_t nx842_timehist_show(struct device *, |
| struct device_attribute *, char *); |
| |
| static struct device_attribute dev_attr_comp_times = __ATTR(comp_times, 0444, |
| nx842_timehist_show, NULL); |
| static struct device_attribute dev_attr_decomp_times = __ATTR(decomp_times, |
| 0444, nx842_timehist_show, NULL); |
| |
| static ssize_t nx842_timehist_show(struct device *dev, |
| struct device_attribute *attr, char *buf) { |
| char *p = buf; |
| struct nx842_devdata *local_devdata; |
| atomic64_t *times; |
| int bytes_remain = PAGE_SIZE; |
| int bytes; |
| int i; |
| |
| rcu_read_lock(); |
| local_devdata = rcu_dereference(devdata); |
| if (!local_devdata) { |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| if (attr == &dev_attr_comp_times) |
| times = local_devdata->counters->comp_times; |
| else if (attr == &dev_attr_decomp_times) |
| times = local_devdata->counters->decomp_times; |
| else { |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| for (i = 0; i < (NX842_HIST_SLOTS - 2); i++) { |
| bytes = snprintf(p, bytes_remain, "%u-%uus:\t%lld\n", |
| i ? (2<<(i-1)) : 0, (2<<i)-1, |
| atomic64_read(×[i])); |
| bytes_remain -= bytes; |
| p += bytes; |
| } |
| /* The last bucket holds everything over |
| * 2<<(NX842_HIST_SLOTS - 2) us */ |
| bytes = snprintf(p, bytes_remain, "%uus - :\t%lld\n", |
| 2<<(NX842_HIST_SLOTS - 2), |
| atomic64_read(×[(NX842_HIST_SLOTS - 1)])); |
| p += bytes; |
| |
| rcu_read_unlock(); |
| return p - buf; |
| } |
| |
| static struct attribute *nx842_sysfs_entries[] = { |
| &dev_attr_comp_complete.attr, |
| &dev_attr_comp_failed.attr, |
| &dev_attr_decomp_complete.attr, |
| &dev_attr_decomp_failed.attr, |
| &dev_attr_swdecomp.attr, |
| &dev_attr_comp_times.attr, |
| &dev_attr_decomp_times.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group nx842_attribute_group = { |
| .name = NULL, /* put in device directory */ |
| .attrs = nx842_sysfs_entries, |
| }; |
| |
| static struct nx842_driver nx842_pseries_driver = { |
| .name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .workmem_size = sizeof(struct nx842_workmem), |
| .constraints = &nx842_pseries_constraints, |
| .compress = nx842_pseries_compress, |
| .decompress = nx842_pseries_decompress, |
| }; |
| |
| static int nx842_pseries_crypto_init(struct crypto_tfm *tfm) |
| { |
| return nx842_crypto_init(tfm, &nx842_pseries_driver); |
| } |
| |
| static struct crypto_alg nx842_pseries_alg = { |
| .cra_name = "842", |
| .cra_driver_name = "842-nx", |
| .cra_priority = 300, |
| .cra_flags = CRYPTO_ALG_TYPE_COMPRESS, |
| .cra_ctxsize = sizeof(struct nx842_crypto_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_init = nx842_pseries_crypto_init, |
| .cra_exit = nx842_crypto_exit, |
| .cra_u = { .compress = { |
| .coa_compress = nx842_crypto_compress, |
| .coa_decompress = nx842_crypto_decompress } } |
| }; |
| |
| static int nx842_probe(struct vio_dev *viodev, |
| const struct vio_device_id *id) |
| { |
| struct nx842_devdata *old_devdata, *new_devdata = NULL; |
| unsigned long flags; |
| int ret = 0; |
| |
| new_devdata = kzalloc(sizeof(*new_devdata), GFP_NOFS); |
| if (!new_devdata) |
| return -ENOMEM; |
| |
| new_devdata->counters = kzalloc(sizeof(*new_devdata->counters), |
| GFP_NOFS); |
| if (!new_devdata->counters) { |
| kfree(new_devdata); |
| return -ENOMEM; |
| } |
| |
| spin_lock_irqsave(&devdata_mutex, flags); |
| old_devdata = rcu_dereference_check(devdata, |
| lockdep_is_held(&devdata_mutex)); |
| |
| if (old_devdata && old_devdata->vdev != NULL) { |
| dev_err(&viodev->dev, "%s: Attempt to register more than one instance of the hardware\n", __func__); |
| ret = -1; |
| goto error_unlock; |
| } |
| |
| dev_set_drvdata(&viodev->dev, NULL); |
| |
| new_devdata->vdev = viodev; |
| new_devdata->dev = &viodev->dev; |
| nx842_OF_set_defaults(new_devdata); |
| |
| rcu_assign_pointer(devdata, new_devdata); |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| synchronize_rcu(); |
| kfree(old_devdata); |
| |
| of_reconfig_notifier_register(&nx842_of_nb); |
| |
| ret = nx842_OF_upd(NULL); |
| if (ret) |
| goto error; |
| |
| ret = crypto_register_alg(&nx842_pseries_alg); |
| if (ret) { |
| dev_err(&viodev->dev, "could not register comp alg: %d\n", ret); |
| goto error; |
| } |
| |
| rcu_read_lock(); |
| dev_set_drvdata(&viodev->dev, rcu_dereference(devdata)); |
| rcu_read_unlock(); |
| |
| if (sysfs_create_group(&viodev->dev.kobj, &nx842_attribute_group)) { |
| dev_err(&viodev->dev, "could not create sysfs device attributes\n"); |
| ret = -1; |
| goto error; |
| } |
| |
| return 0; |
| |
| error_unlock: |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| if (new_devdata) |
| kfree(new_devdata->counters); |
| kfree(new_devdata); |
| error: |
| return ret; |
| } |
| |
| static int nx842_remove(struct vio_dev *viodev) |
| { |
| struct nx842_devdata *old_devdata; |
| unsigned long flags; |
| |
| pr_info("Removing IBM Power 842 compression device\n"); |
| sysfs_remove_group(&viodev->dev.kobj, &nx842_attribute_group); |
| |
| crypto_unregister_alg(&nx842_pseries_alg); |
| |
| spin_lock_irqsave(&devdata_mutex, flags); |
| old_devdata = rcu_dereference_check(devdata, |
| lockdep_is_held(&devdata_mutex)); |
| of_reconfig_notifier_unregister(&nx842_of_nb); |
| RCU_INIT_POINTER(devdata, NULL); |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| synchronize_rcu(); |
| dev_set_drvdata(&viodev->dev, NULL); |
| if (old_devdata) |
| kfree(old_devdata->counters); |
| kfree(old_devdata); |
| |
| return 0; |
| } |
| |
| static const struct vio_device_id nx842_vio_driver_ids[] = { |
| {"ibm,compression-v1", "ibm,compression"}, |
| {"", ""}, |
| }; |
| MODULE_DEVICE_TABLE(vio, nx842_vio_driver_ids); |
| |
| static struct vio_driver nx842_vio_driver = { |
| .name = KBUILD_MODNAME, |
| .probe = nx842_probe, |
| .remove = nx842_remove, |
| .get_desired_dma = nx842_get_desired_dma, |
| .id_table = nx842_vio_driver_ids, |
| }; |
| |
| static int __init nx842_pseries_init(void) |
| { |
| struct nx842_devdata *new_devdata; |
| int ret; |
| |
| if (!of_find_compatible_node(NULL, NULL, "ibm,compression")) |
| return -ENODEV; |
| |
| RCU_INIT_POINTER(devdata, NULL); |
| new_devdata = kzalloc(sizeof(*new_devdata), GFP_KERNEL); |
| if (!new_devdata) |
| return -ENOMEM; |
| |
| RCU_INIT_POINTER(devdata, new_devdata); |
| |
| ret = vio_register_driver(&nx842_vio_driver); |
| if (ret) { |
| pr_err("Could not register VIO driver %d\n", ret); |
| |
| kfree(new_devdata); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| module_init(nx842_pseries_init); |
| |
| static void __exit nx842_pseries_exit(void) |
| { |
| struct nx842_devdata *old_devdata; |
| unsigned long flags; |
| |
| crypto_unregister_alg(&nx842_pseries_alg); |
| |
| spin_lock_irqsave(&devdata_mutex, flags); |
| old_devdata = rcu_dereference_check(devdata, |
| lockdep_is_held(&devdata_mutex)); |
| RCU_INIT_POINTER(devdata, NULL); |
| spin_unlock_irqrestore(&devdata_mutex, flags); |
| synchronize_rcu(); |
| if (old_devdata && old_devdata->dev) |
| dev_set_drvdata(old_devdata->dev, NULL); |
| kfree(old_devdata); |
| vio_unregister_driver(&nx842_vio_driver); |
| } |
| |
| module_exit(nx842_pseries_exit); |
| |