| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2019, The Linaro Limited. All rights reserved. |
| */ |
| #include <linux/coresight.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/property.h> |
| #include <linux/slab.h> |
| |
| #include <dt-bindings/arm/coresight-cti-dt.h> |
| |
| #include "coresight-cti.h" |
| #include "coresight-priv.h" |
| |
| /* Number of CTI signals in the v8 architecturally defined connection */ |
| #define NR_V8PE_IN_SIGS 2 |
| #define NR_V8PE_OUT_SIGS 3 |
| #define NR_V8ETM_INOUT_SIGS 4 |
| |
| /* CTI device tree trigger connection node keyword */ |
| #define CTI_DT_CONNS "trig-conns" |
| |
| /* CTI device tree connection property keywords */ |
| #define CTI_DT_V8ARCH_COMPAT "arm,coresight-cti-v8-arch" |
| #define CTI_DT_CSDEV_ASSOC "arm,cs-dev-assoc" |
| #define CTI_DT_TRIGIN_SIGS "arm,trig-in-sigs" |
| #define CTI_DT_TRIGOUT_SIGS "arm,trig-out-sigs" |
| #define CTI_DT_TRIGIN_TYPES "arm,trig-in-types" |
| #define CTI_DT_TRIGOUT_TYPES "arm,trig-out-types" |
| #define CTI_DT_FILTER_OUT_SIGS "arm,trig-filters" |
| #define CTI_DT_CONN_NAME "arm,trig-conn-name" |
| #define CTI_DT_CTM_ID "arm,cti-ctm-id" |
| |
| #ifdef CONFIG_OF |
| /* |
| * CTI can be bound to a CPU, or a system device. |
| * CPU can be declared at the device top level or in a connections node |
| * so need to check relative to node not device. |
| */ |
| static int of_cti_get_cpu_at_node(const struct device_node *node) |
| { |
| int cpu; |
| struct device_node *dn; |
| |
| if (node == NULL) |
| return -1; |
| |
| dn = of_parse_phandle(node, "cpu", 0); |
| /* CTI affinity defaults to no cpu */ |
| if (!dn) |
| return -1; |
| cpu = of_cpu_node_to_id(dn); |
| of_node_put(dn); |
| |
| /* No Affinity if no cpu nodes are found */ |
| return (cpu < 0) ? -1 : cpu; |
| } |
| |
| #else |
| static int of_cti_get_cpu_at_node(const struct device_node *node) |
| { |
| return -1; |
| } |
| |
| #endif |
| |
| /* |
| * CTI can be bound to a CPU, or a system device. |
| * CPU can be declared at the device top level or in a connections node |
| * so need to check relative to node not device. |
| */ |
| static int cti_plat_get_cpu_at_node(struct fwnode_handle *fwnode) |
| { |
| if (is_of_node(fwnode)) |
| return of_cti_get_cpu_at_node(to_of_node(fwnode)); |
| return -1; |
| } |
| |
| const char *cti_plat_get_node_name(struct fwnode_handle *fwnode) |
| { |
| if (is_of_node(fwnode)) |
| return of_node_full_name(to_of_node(fwnode)); |
| return "unknown"; |
| } |
| |
| /* |
| * Extract a name from the fwnode. |
| * If the device associated with the node is a coresight_device, then return |
| * that name and the coresight_device pointer, otherwise return the node name. |
| */ |
| static const char * |
| cti_plat_get_csdev_or_node_name(struct fwnode_handle *fwnode, |
| struct coresight_device **csdev) |
| { |
| const char *name = NULL; |
| *csdev = coresight_find_csdev_by_fwnode(fwnode); |
| if (*csdev) |
| name = dev_name(&(*csdev)->dev); |
| else |
| name = cti_plat_get_node_name(fwnode); |
| return name; |
| } |
| |
| static bool cti_plat_node_name_eq(struct fwnode_handle *fwnode, |
| const char *name) |
| { |
| if (is_of_node(fwnode)) |
| return of_node_name_eq(to_of_node(fwnode), name); |
| return false; |
| } |
| |
| static int cti_plat_create_v8_etm_connection(struct device *dev, |
| struct cti_drvdata *drvdata) |
| { |
| int ret = -ENOMEM, i; |
| struct fwnode_handle *root_fwnode, *cs_fwnode; |
| const char *assoc_name = NULL; |
| struct coresight_device *csdev; |
| struct cti_trig_con *tc = NULL; |
| |
| root_fwnode = dev_fwnode(dev); |
| if (IS_ERR_OR_NULL(root_fwnode)) |
| return -EINVAL; |
| |
| /* Can optionally have an etm node - return if not */ |
| cs_fwnode = fwnode_find_reference(root_fwnode, CTI_DT_CSDEV_ASSOC, 0); |
| if (IS_ERR(cs_fwnode)) |
| return 0; |
| |
| /* allocate memory */ |
| tc = cti_allocate_trig_con(dev, NR_V8ETM_INOUT_SIGS, |
| NR_V8ETM_INOUT_SIGS); |
| if (!tc) |
| goto create_v8_etm_out; |
| |
| /* build connection data */ |
| tc->con_in->used_mask = 0xF0; /* sigs <4,5,6,7> */ |
| tc->con_out->used_mask = 0xF0; /* sigs <4,5,6,7> */ |
| |
| /* |
| * The EXTOUT type signals from the ETM are connected to a set of input |
| * triggers on the CTI, the EXTIN being connected to output triggers. |
| */ |
| for (i = 0; i < NR_V8ETM_INOUT_SIGS; i++) { |
| tc->con_in->sig_types[i] = ETM_EXTOUT; |
| tc->con_out->sig_types[i] = ETM_EXTIN; |
| } |
| |
| /* |
| * We look to see if the ETM coresight device associated with this |
| * handle has been registered with the system - i.e. probed before |
| * this CTI. If so csdev will be non NULL and we can use the device |
| * name and pass the csdev to the connection entry function where |
| * the association will be recorded. |
| * If not, then simply record the name in the connection data, the |
| * probing of the ETM will call into the CTI driver API to update the |
| * association then. |
| */ |
| assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, &csdev); |
| ret = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name); |
| |
| create_v8_etm_out: |
| fwnode_handle_put(cs_fwnode); |
| return ret; |
| } |
| |
| /* |
| * Create an architecturally defined v8 connection |
| * must have a cpu, can have an ETM. |
| */ |
| static int cti_plat_create_v8_connections(struct device *dev, |
| struct cti_drvdata *drvdata) |
| { |
| struct cti_device *cti_dev = &drvdata->ctidev; |
| struct cti_trig_con *tc = NULL; |
| int cpuid = 0; |
| char cpu_name_str[16]; |
| int ret = -ENOMEM; |
| |
| /* Must have a cpu node */ |
| cpuid = cti_plat_get_cpu_at_node(dev_fwnode(dev)); |
| if (cpuid < 0) { |
| dev_warn(dev, |
| "ARM v8 architectural CTI connection: missing cpu\n"); |
| return -EINVAL; |
| } |
| cti_dev->cpu = cpuid; |
| |
| /* Allocate the v8 cpu connection memory */ |
| tc = cti_allocate_trig_con(dev, NR_V8PE_IN_SIGS, NR_V8PE_OUT_SIGS); |
| if (!tc) |
| goto of_create_v8_out; |
| |
| /* Set the v8 PE CTI connection data */ |
| tc->con_in->used_mask = 0x3; /* sigs <0 1> */ |
| tc->con_in->sig_types[0] = PE_DBGTRIGGER; |
| tc->con_in->sig_types[1] = PE_PMUIRQ; |
| tc->con_out->used_mask = 0x7; /* sigs <0 1 2 > */ |
| tc->con_out->sig_types[0] = PE_EDBGREQ; |
| tc->con_out->sig_types[1] = PE_DBGRESTART; |
| tc->con_out->sig_types[2] = PE_CTIIRQ; |
| scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid); |
| |
| ret = cti_add_connection_entry(dev, drvdata, tc, NULL, cpu_name_str); |
| if (ret) |
| goto of_create_v8_out; |
| |
| /* Create the v8 ETM associated connection */ |
| ret = cti_plat_create_v8_etm_connection(dev, drvdata); |
| if (ret) |
| goto of_create_v8_out; |
| |
| /* filter pe_edbgreq - PE trigout sig <0> */ |
| drvdata->config.trig_out_filter |= 0x1; |
| |
| of_create_v8_out: |
| return ret; |
| } |
| |
| static int cti_plat_check_v8_arch_compatible(struct device *dev) |
| { |
| struct fwnode_handle *fwnode = dev_fwnode(dev); |
| |
| if (is_of_node(fwnode)) |
| return of_device_is_compatible(to_of_node(fwnode), |
| CTI_DT_V8ARCH_COMPAT); |
| return 0; |
| } |
| |
| static int cti_plat_count_sig_elements(const struct fwnode_handle *fwnode, |
| const char *name) |
| { |
| int nr_elem = fwnode_property_count_u32(fwnode, name); |
| |
| return (nr_elem < 0 ? 0 : nr_elem); |
| } |
| |
| static int cti_plat_read_trig_group(struct cti_trig_grp *tgrp, |
| const struct fwnode_handle *fwnode, |
| const char *grp_name) |
| { |
| int idx, err = 0; |
| u32 *values; |
| |
| if (!tgrp->nr_sigs) |
| return 0; |
| |
| values = kcalloc(tgrp->nr_sigs, sizeof(u32), GFP_KERNEL); |
| if (!values) |
| return -ENOMEM; |
| |
| err = fwnode_property_read_u32_array(fwnode, grp_name, |
| values, tgrp->nr_sigs); |
| |
| if (!err) { |
| /* set the signal usage mask */ |
| for (idx = 0; idx < tgrp->nr_sigs; idx++) |
| tgrp->used_mask |= BIT(values[idx]); |
| } |
| |
| kfree(values); |
| return err; |
| } |
| |
| static int cti_plat_read_trig_types(struct cti_trig_grp *tgrp, |
| const struct fwnode_handle *fwnode, |
| const char *type_name) |
| { |
| int items, err = 0, nr_sigs; |
| u32 *values = NULL, i; |
| |
| /* allocate an array according to number of signals in connection */ |
| nr_sigs = tgrp->nr_sigs; |
| if (!nr_sigs) |
| return 0; |
| |
| /* see if any types have been included in the device description */ |
| items = cti_plat_count_sig_elements(fwnode, type_name); |
| if (items > nr_sigs) |
| return -EINVAL; |
| |
| /* need an array to store the values iff there are any */ |
| if (items) { |
| values = kcalloc(items, sizeof(u32), GFP_KERNEL); |
| if (!values) |
| return -ENOMEM; |
| |
| err = fwnode_property_read_u32_array(fwnode, type_name, |
| values, items); |
| if (err) |
| goto read_trig_types_out; |
| } |
| |
| /* |
| * Match type id to signal index, 1st type to 1st index etc. |
| * If fewer types than signals default remainder to GEN_IO. |
| */ |
| for (i = 0; i < nr_sigs; i++) { |
| if (i < items) { |
| tgrp->sig_types[i] = |
| values[i] < CTI_TRIG_MAX ? values[i] : GEN_IO; |
| } else { |
| tgrp->sig_types[i] = GEN_IO; |
| } |
| } |
| |
| read_trig_types_out: |
| kfree(values); |
| return err; |
| } |
| |
| static int cti_plat_process_filter_sigs(struct cti_drvdata *drvdata, |
| const struct fwnode_handle *fwnode) |
| { |
| struct cti_trig_grp *tg = NULL; |
| int err = 0, nr_filter_sigs; |
| |
| nr_filter_sigs = cti_plat_count_sig_elements(fwnode, |
| CTI_DT_FILTER_OUT_SIGS); |
| if (nr_filter_sigs == 0) |
| return 0; |
| |
| if (nr_filter_sigs > drvdata->config.nr_trig_max) |
| return -EINVAL; |
| |
| tg = kzalloc(sizeof(*tg), GFP_KERNEL); |
| if (!tg) |
| return -ENOMEM; |
| |
| err = cti_plat_read_trig_group(tg, fwnode, CTI_DT_FILTER_OUT_SIGS); |
| if (!err) |
| drvdata->config.trig_out_filter |= tg->used_mask; |
| |
| kfree(tg); |
| return err; |
| } |
| |
| static int cti_plat_create_connection(struct device *dev, |
| struct cti_drvdata *drvdata, |
| struct fwnode_handle *fwnode) |
| { |
| struct cti_trig_con *tc = NULL; |
| int cpuid = -1, err = 0; |
| struct coresight_device *csdev = NULL; |
| const char *assoc_name = "unknown"; |
| char cpu_name_str[16]; |
| int nr_sigs_in, nr_sigs_out; |
| |
| /* look to see how many in and out signals we have */ |
| nr_sigs_in = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGIN_SIGS); |
| nr_sigs_out = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGOUT_SIGS); |
| |
| if ((nr_sigs_in > drvdata->config.nr_trig_max) || |
| (nr_sigs_out > drvdata->config.nr_trig_max)) |
| return -EINVAL; |
| |
| tc = cti_allocate_trig_con(dev, nr_sigs_in, nr_sigs_out); |
| if (!tc) |
| return -ENOMEM; |
| |
| /* look for the signals properties. */ |
| err = cti_plat_read_trig_group(tc->con_in, fwnode, |
| CTI_DT_TRIGIN_SIGS); |
| if (err) |
| goto create_con_err; |
| |
| err = cti_plat_read_trig_types(tc->con_in, fwnode, |
| CTI_DT_TRIGIN_TYPES); |
| if (err) |
| goto create_con_err; |
| |
| err = cti_plat_read_trig_group(tc->con_out, fwnode, |
| CTI_DT_TRIGOUT_SIGS); |
| if (err) |
| goto create_con_err; |
| |
| err = cti_plat_read_trig_types(tc->con_out, fwnode, |
| CTI_DT_TRIGOUT_TYPES); |
| if (err) |
| goto create_con_err; |
| |
| err = cti_plat_process_filter_sigs(drvdata, fwnode); |
| if (err) |
| goto create_con_err; |
| |
| /* read the connection name if set - may be overridden by later */ |
| fwnode_property_read_string(fwnode, CTI_DT_CONN_NAME, &assoc_name); |
| |
| /* associated cpu ? */ |
| cpuid = cti_plat_get_cpu_at_node(fwnode); |
| if (cpuid >= 0) { |
| drvdata->ctidev.cpu = cpuid; |
| scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid); |
| assoc_name = cpu_name_str; |
| } else { |
| /* associated device ? */ |
| struct fwnode_handle *cs_fwnode = fwnode_find_reference(fwnode, |
| CTI_DT_CSDEV_ASSOC, |
| 0); |
| if (!IS_ERR(cs_fwnode)) { |
| assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, |
| &csdev); |
| fwnode_handle_put(cs_fwnode); |
| } |
| } |
| /* set up a connection */ |
| err = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name); |
| |
| create_con_err: |
| return err; |
| } |
| |
| static int cti_plat_create_impdef_connections(struct device *dev, |
| struct cti_drvdata *drvdata) |
| { |
| int rc = 0; |
| struct fwnode_handle *fwnode = dev_fwnode(dev); |
| struct fwnode_handle *child = NULL; |
| |
| if (IS_ERR_OR_NULL(fwnode)) |
| return -EINVAL; |
| |
| fwnode_for_each_child_node(fwnode, child) { |
| if (cti_plat_node_name_eq(child, CTI_DT_CONNS)) |
| rc = cti_plat_create_connection(dev, drvdata, |
| child); |
| if (rc != 0) |
| break; |
| } |
| fwnode_handle_put(child); |
| |
| return rc; |
| } |
| |
| /* get the hardware configuration & connection data. */ |
| static int cti_plat_get_hw_data(struct device *dev, struct cti_drvdata *drvdata) |
| { |
| int rc = 0; |
| struct cti_device *cti_dev = &drvdata->ctidev; |
| |
| /* get any CTM ID - defaults to 0 */ |
| device_property_read_u32(dev, CTI_DT_CTM_ID, &cti_dev->ctm_id); |
| |
| /* check for a v8 architectural CTI device */ |
| if (cti_plat_check_v8_arch_compatible(dev)) |
| rc = cti_plat_create_v8_connections(dev, drvdata); |
| else |
| rc = cti_plat_create_impdef_connections(dev, drvdata); |
| if (rc) |
| return rc; |
| |
| /* if no connections, just add a single default based on max IN-OUT */ |
| if (cti_dev->nr_trig_con == 0) |
| rc = cti_add_default_connection(dev, drvdata); |
| return rc; |
| } |
| |
| struct coresight_platform_data * |
| coresight_cti_get_platform_data(struct device *dev) |
| { |
| int ret = -ENOENT; |
| struct coresight_platform_data *pdata = NULL; |
| struct fwnode_handle *fwnode = dev_fwnode(dev); |
| struct cti_drvdata *drvdata = dev_get_drvdata(dev); |
| |
| if (IS_ERR_OR_NULL(fwnode)) |
| goto error; |
| |
| /* |
| * Alloc platform data but leave it zero init. CTI does not use the |
| * same connection infrastructuree as trace path components but an |
| * empty struct enables us to use the standard coresight component |
| * registration code. |
| */ |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| /* get some CTI specifics */ |
| ret = cti_plat_get_hw_data(dev, drvdata); |
| |
| if (!ret) |
| return pdata; |
| error: |
| return ERR_PTR(ret); |
| } |