| // SPDX-License-Identifier: GPL-2.0 |
| // TI LM3697 LED chip family driver |
| // Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/leds-ti-lmu-common.h> |
| |
| #define LM3697_REV 0x0 |
| #define LM3697_RESET 0x1 |
| #define LM3697_OUTPUT_CONFIG 0x10 |
| #define LM3697_CTRL_A_RAMP 0x11 |
| #define LM3697_CTRL_B_RAMP 0x12 |
| #define LM3697_CTRL_A_B_RT_RAMP 0x13 |
| #define LM3697_CTRL_A_B_RAMP_CFG 0x14 |
| #define LM3697_CTRL_A_B_BRT_CFG 0x16 |
| #define LM3697_CTRL_A_FS_CURR_CFG 0x17 |
| #define LM3697_CTRL_B_FS_CURR_CFG 0x18 |
| #define LM3697_PWM_CFG 0x1c |
| #define LM3697_CTRL_A_BRT_LSB 0x20 |
| #define LM3697_CTRL_A_BRT_MSB 0x21 |
| #define LM3697_CTRL_B_BRT_LSB 0x22 |
| #define LM3697_CTRL_B_BRT_MSB 0x23 |
| #define LM3697_CTRL_ENABLE 0x24 |
| |
| #define LM3697_SW_RESET BIT(0) |
| |
| #define LM3697_CTRL_A_EN BIT(0) |
| #define LM3697_CTRL_B_EN BIT(1) |
| #define LM3697_CTRL_A_B_EN (LM3697_CTRL_A_EN | LM3697_CTRL_B_EN) |
| |
| #define LM3697_MAX_LED_STRINGS 3 |
| |
| #define LM3697_CONTROL_A 0 |
| #define LM3697_CONTROL_B 1 |
| #define LM3697_MAX_CONTROL_BANKS 2 |
| |
| /** |
| * struct lm3697_led - |
| * @hvled_strings: Array of LED strings associated with a control bank |
| * @label: LED label |
| * @led_dev: LED class device |
| * @priv: Pointer to the device struct |
| * @lmu_data: Register and setting values for common code |
| * @control_bank: Control bank the LED is associated to. 0 is control bank A |
| * 1 is control bank B |
| */ |
| struct lm3697_led { |
| u32 hvled_strings[LM3697_MAX_LED_STRINGS]; |
| char label[LED_MAX_NAME_SIZE]; |
| struct led_classdev led_dev; |
| struct lm3697 *priv; |
| struct ti_lmu_bank lmu_data; |
| int control_bank; |
| int enabled; |
| int num_leds; |
| }; |
| |
| /** |
| * struct lm3697 - |
| * @enable_gpio: Hardware enable gpio |
| * @regulator: LED supply regulator pointer |
| * @client: Pointer to the I2C client |
| * @regmap: Devices register map |
| * @dev: Pointer to the devices device struct |
| * @lock: Lock for reading/writing the device |
| * @leds: Array of LED strings |
| */ |
| struct lm3697 { |
| struct gpio_desc *enable_gpio; |
| struct regulator *regulator; |
| struct i2c_client *client; |
| struct regmap *regmap; |
| struct device *dev; |
| struct mutex lock; |
| |
| int bank_cfg; |
| int num_banks; |
| |
| struct lm3697_led leds[]; |
| }; |
| |
| static const struct reg_default lm3697_reg_defs[] = { |
| {LM3697_OUTPUT_CONFIG, 0x6}, |
| {LM3697_CTRL_A_RAMP, 0x0}, |
| {LM3697_CTRL_B_RAMP, 0x0}, |
| {LM3697_CTRL_A_B_RT_RAMP, 0x0}, |
| {LM3697_CTRL_A_B_RAMP_CFG, 0x0}, |
| {LM3697_CTRL_A_B_BRT_CFG, 0x0}, |
| {LM3697_CTRL_A_FS_CURR_CFG, 0x13}, |
| {LM3697_CTRL_B_FS_CURR_CFG, 0x13}, |
| {LM3697_PWM_CFG, 0xc}, |
| {LM3697_CTRL_A_BRT_LSB, 0x0}, |
| {LM3697_CTRL_A_BRT_MSB, 0x0}, |
| {LM3697_CTRL_B_BRT_LSB, 0x0}, |
| {LM3697_CTRL_B_BRT_MSB, 0x0}, |
| {LM3697_CTRL_ENABLE, 0x0}, |
| }; |
| |
| static const struct regmap_config lm3697_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = LM3697_CTRL_ENABLE, |
| .reg_defaults = lm3697_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs), |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static int lm3697_brightness_set(struct led_classdev *led_cdev, |
| enum led_brightness brt_val) |
| { |
| struct lm3697_led *led = container_of(led_cdev, struct lm3697_led, |
| led_dev); |
| int ctrl_en_val = (1 << led->control_bank); |
| struct device *dev = led->priv->dev; |
| int ret; |
| |
| mutex_lock(&led->priv->lock); |
| |
| if (brt_val == LED_OFF) { |
| ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE, |
| ctrl_en_val, ~ctrl_en_val); |
| if (ret) { |
| dev_err(dev, "Cannot write ctrl register\n"); |
| goto brightness_out; |
| } |
| |
| led->enabled = LED_OFF; |
| } else { |
| ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val); |
| if (ret) { |
| dev_err(dev, "Cannot write brightness\n"); |
| goto brightness_out; |
| } |
| |
| if (!led->enabled) { |
| ret = regmap_update_bits(led->priv->regmap, |
| LM3697_CTRL_ENABLE, |
| ctrl_en_val, ctrl_en_val); |
| if (ret) { |
| dev_err(dev, "Cannot enable the device\n"); |
| goto brightness_out; |
| } |
| |
| led->enabled = brt_val; |
| } |
| } |
| |
| brightness_out: |
| mutex_unlock(&led->priv->lock); |
| return ret; |
| } |
| |
| static int lm3697_init(struct lm3697 *priv) |
| { |
| struct device *dev = priv->dev; |
| struct lm3697_led *led; |
| int i, ret; |
| |
| if (priv->enable_gpio) { |
| gpiod_direction_output(priv->enable_gpio, 1); |
| } else { |
| ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET); |
| if (ret) { |
| dev_err(dev, "Cannot reset the device\n"); |
| goto out; |
| } |
| } |
| |
| ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0); |
| if (ret) { |
| dev_err(dev, "Cannot write ctrl enable\n"); |
| goto out; |
| } |
| |
| ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg); |
| if (ret) |
| dev_err(dev, "Cannot write OUTPUT config\n"); |
| |
| for (i = 0; i < priv->num_banks; i++) { |
| led = &priv->leds[i]; |
| ret = ti_lmu_common_set_ramp(&led->lmu_data); |
| if (ret) |
| dev_err(dev, "Setting the ramp rate failed\n"); |
| } |
| out: |
| return ret; |
| } |
| |
| static int lm3697_probe_dt(struct lm3697 *priv) |
| { |
| struct fwnode_handle *child = NULL; |
| struct device *dev = priv->dev; |
| struct lm3697_led *led; |
| int ret = -EINVAL; |
| int control_bank; |
| size_t i = 0; |
| int j; |
| |
| priv->enable_gpio = devm_gpiod_get_optional(dev, "enable", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(priv->enable_gpio)) |
| return dev_err_probe(dev, PTR_ERR(priv->enable_gpio), |
| "Failed to get enable GPIO\n"); |
| |
| priv->regulator = devm_regulator_get(dev, "vled"); |
| if (IS_ERR(priv->regulator)) |
| priv->regulator = NULL; |
| |
| device_for_each_child_node(dev, child) { |
| struct led_init_data init_data = {}; |
| |
| ret = fwnode_property_read_u32(child, "reg", &control_bank); |
| if (ret) { |
| dev_err(dev, "reg property missing\n"); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| if (control_bank > LM3697_CONTROL_B) { |
| dev_err(dev, "reg property is invalid\n"); |
| ret = -EINVAL; |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| led = &priv->leds[i]; |
| |
| ret = ti_lmu_common_get_brt_res(dev, child, &led->lmu_data); |
| if (ret) |
| dev_warn(dev, |
| "brightness resolution property missing\n"); |
| |
| led->control_bank = control_bank; |
| led->lmu_data.regmap = priv->regmap; |
| led->lmu_data.runtime_ramp_reg = LM3697_CTRL_A_RAMP + |
| control_bank; |
| led->lmu_data.msb_brightness_reg = LM3697_CTRL_A_BRT_MSB + |
| led->control_bank * 2; |
| led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB + |
| led->control_bank * 2; |
| |
| led->num_leds = fwnode_property_count_u32(child, "led-sources"); |
| if (led->num_leds > LM3697_MAX_LED_STRINGS) { |
| dev_err(dev, "Too many LED strings defined\n"); |
| continue; |
| } |
| |
| ret = fwnode_property_read_u32_array(child, "led-sources", |
| led->hvled_strings, |
| led->num_leds); |
| if (ret) { |
| dev_err(dev, "led-sources property missing\n"); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| for (j = 0; j < led->num_leds; j++) |
| priv->bank_cfg |= |
| (led->control_bank << led->hvled_strings[j]); |
| |
| ret = ti_lmu_common_get_ramp_params(dev, child, &led->lmu_data); |
| if (ret) |
| dev_warn(dev, "runtime-ramp properties missing\n"); |
| |
| init_data.fwnode = child; |
| init_data.devicename = priv->client->name; |
| /* for backwards compatibility if `label` is not present */ |
| init_data.default_label = ":"; |
| |
| led->priv = priv; |
| led->led_dev.max_brightness = led->lmu_data.max_brightness; |
| led->led_dev.brightness_set_blocking = lm3697_brightness_set; |
| |
| ret = devm_led_classdev_register_ext(dev, &led->led_dev, |
| &init_data); |
| if (ret) { |
| dev_err(dev, "led register err: %d\n", ret); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| i++; |
| } |
| |
| child_out: |
| return ret; |
| } |
| |
| static int lm3697_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct lm3697 *led; |
| int count; |
| int ret; |
| |
| count = device_get_child_node_count(dev); |
| if (!count || count > LM3697_MAX_CONTROL_BANKS) { |
| dev_err(dev, "Strange device tree!"); |
| return -ENODEV; |
| } |
| |
| led = devm_kzalloc(dev, struct_size(led, leds, count), GFP_KERNEL); |
| if (!led) |
| return -ENOMEM; |
| |
| mutex_init(&led->lock); |
| i2c_set_clientdata(client, led); |
| |
| led->client = client; |
| led->dev = dev; |
| led->num_banks = count; |
| led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config); |
| if (IS_ERR(led->regmap)) { |
| ret = PTR_ERR(led->regmap); |
| dev_err(dev, "Failed to allocate register map: %d\n", ret); |
| return ret; |
| } |
| |
| ret = lm3697_probe_dt(led); |
| if (ret) |
| return ret; |
| |
| return lm3697_init(led); |
| } |
| |
| static int lm3697_remove(struct i2c_client *client) |
| { |
| struct lm3697 *led = i2c_get_clientdata(client); |
| struct device *dev = &led->client->dev; |
| int ret; |
| |
| ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE, |
| LM3697_CTRL_A_B_EN, 0); |
| if (ret) { |
| dev_err(dev, "Failed to disable the device\n"); |
| return ret; |
| } |
| |
| if (led->enable_gpio) |
| gpiod_direction_output(led->enable_gpio, 0); |
| |
| if (led->regulator) { |
| ret = regulator_disable(led->regulator); |
| if (ret) |
| dev_err(dev, "Failed to disable regulator\n"); |
| } |
| |
| mutex_destroy(&led->lock); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id lm3697_id[] = { |
| { "lm3697", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lm3697_id); |
| |
| static const struct of_device_id of_lm3697_leds_match[] = { |
| { .compatible = "ti,lm3697", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_lm3697_leds_match); |
| |
| static struct i2c_driver lm3697_driver = { |
| .driver = { |
| .name = "lm3697", |
| .of_match_table = of_lm3697_leds_match, |
| }, |
| .probe = lm3697_probe, |
| .remove = lm3697_remove, |
| .id_table = lm3697_id, |
| }; |
| module_i2c_driver(lm3697_driver); |
| |
| MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver"); |
| MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |