| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2010 Texas Instruments Inc |
| */ |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ctype.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/videodev2.h> |
| #include <linux/slab.h> |
| |
| #include <linux/platform_data/i2c-davinci.h> |
| |
| #include <linux/io.h> |
| |
| #include <media/davinci/vpbe_types.h> |
| #include <media/davinci/vpbe_venc.h> |
| #include <media/davinci/vpss.h> |
| #include <media/v4l2-device.h> |
| |
| #include "vpbe_venc_regs.h" |
| |
| #define MODULE_NAME "davinci-vpbe-venc" |
| |
| static const struct platform_device_id vpbe_venc_devtype[] = { |
| { |
| .name = DM644X_VPBE_VENC_SUBDEV_NAME, |
| .driver_data = VPBE_VERSION_1, |
| }, { |
| .name = DM365_VPBE_VENC_SUBDEV_NAME, |
| .driver_data = VPBE_VERSION_2, |
| }, { |
| .name = DM355_VPBE_VENC_SUBDEV_NAME, |
| .driver_data = VPBE_VERSION_3, |
| }, |
| { |
| /* sentinel */ |
| } |
| }; |
| |
| MODULE_DEVICE_TABLE(platform, vpbe_venc_devtype); |
| |
| static int debug = 2; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Debug level 0-2"); |
| |
| struct venc_state { |
| struct v4l2_subdev sd; |
| struct venc_callback *callback; |
| struct venc_platform_data *pdata; |
| struct device *pdev; |
| u32 output; |
| v4l2_std_id std; |
| spinlock_t lock; |
| void __iomem *venc_base; |
| void __iomem *vdaccfg_reg; |
| enum vpbe_version venc_type; |
| }; |
| |
| static inline struct venc_state *to_state(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct venc_state, sd); |
| } |
| |
| static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset) |
| { |
| struct venc_state *venc = to_state(sd); |
| |
| return readl(venc->venc_base + offset); |
| } |
| |
| static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val) |
| { |
| struct venc_state *venc = to_state(sd); |
| |
| writel(val, (venc->venc_base + offset)); |
| |
| return val; |
| } |
| |
| static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset, |
| u32 val, u32 mask) |
| { |
| u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask); |
| |
| venc_write(sd, offset, new_val); |
| |
| return new_val; |
| } |
| |
| static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val) |
| { |
| struct venc_state *venc = to_state(sd); |
| |
| writel(val, venc->vdaccfg_reg); |
| |
| val = readl(venc->vdaccfg_reg); |
| |
| return val; |
| } |
| |
| #define VDAC_COMPONENT 0x543 |
| #define VDAC_S_VIDEO 0x210 |
| /* This function sets the dac of the VPBE for various outputs |
| */ |
| static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) |
| { |
| switch (out_index) { |
| case 0: |
| v4l2_dbg(debug, 1, sd, "Setting output to Composite\n"); |
| venc_write(sd, VENC_DACSEL, 0); |
| break; |
| case 1: |
| v4l2_dbg(debug, 1, sd, "Setting output to Component\n"); |
| venc_write(sd, VENC_DACSEL, VDAC_COMPONENT); |
| break; |
| case 2: |
| v4l2_dbg(debug, 1, sd, "Setting output to S-video\n"); |
| venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) |
| { |
| struct venc_state *venc = to_state(sd); |
| |
| v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n"); |
| |
| if (benable) { |
| venc_write(sd, VENC_VMOD, 0); |
| venc_write(sd, VENC_CVBS, 0); |
| venc_write(sd, VENC_LCDOUT, 0); |
| venc_write(sd, VENC_HSPLS, 0); |
| venc_write(sd, VENC_HSTART, 0); |
| venc_write(sd, VENC_HVALID, 0); |
| venc_write(sd, VENC_HINT, 0); |
| venc_write(sd, VENC_VSPLS, 0); |
| venc_write(sd, VENC_VSTART, 0); |
| venc_write(sd, VENC_VVALID, 0); |
| venc_write(sd, VENC_VINT, 0); |
| venc_write(sd, VENC_YCCCTL, 0); |
| venc_write(sd, VENC_DACSEL, 0); |
| |
| } else { |
| venc_write(sd, VENC_VMOD, 0); |
| /* disable VCLK output pin enable */ |
| venc_write(sd, VENC_VIDCTL, 0x141); |
| |
| /* Disable output sync pins */ |
| venc_write(sd, VENC_SYNCCTL, 0); |
| |
| /* Disable DCLOCK */ |
| venc_write(sd, VENC_DCLKCTL, 0); |
| venc_write(sd, VENC_DRGBX1, 0x0000057C); |
| |
| /* Disable LCD output control (accepting default polarity) */ |
| venc_write(sd, VENC_LCDOUT, 0); |
| if (venc->venc_type != VPBE_VERSION_3) |
| venc_write(sd, VENC_CMPNT, 0x100); |
| venc_write(sd, VENC_HSPLS, 0); |
| venc_write(sd, VENC_HINT, 0); |
| venc_write(sd, VENC_HSTART, 0); |
| venc_write(sd, VENC_HVALID, 0); |
| |
| venc_write(sd, VENC_VSPLS, 0); |
| venc_write(sd, VENC_VINT, 0); |
| venc_write(sd, VENC_VSTART, 0); |
| venc_write(sd, VENC_VVALID, 0); |
| |
| venc_write(sd, VENC_HSDLY, 0); |
| venc_write(sd, VENC_VSDLY, 0); |
| |
| venc_write(sd, VENC_YCCCTL, 0); |
| venc_write(sd, VENC_VSTARTA, 0); |
| |
| /* Set OSD clock and OSD Sync Adavance registers */ |
| venc_write(sd, VENC_OSDCLK0, 1); |
| venc_write(sd, VENC_OSDCLK1, 2); |
| } |
| } |
| |
| static void |
| venc_enable_vpss_clock(int venc_type, |
| enum vpbe_enc_timings_type type, |
| unsigned int pclock) |
| { |
| if (venc_type == VPBE_VERSION_1) |
| return; |
| |
| if (venc_type == VPBE_VERSION_2 && (type == VPBE_ENC_STD || (type == |
| VPBE_ENC_DV_TIMINGS && pclock <= 27000000))) { |
| vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); |
| vpss_enable_clock(VPSS_VPBE_CLOCK, 1); |
| return; |
| } |
| |
| if (venc_type == VPBE_VERSION_3 && type == VPBE_ENC_STD) |
| vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 0); |
| } |
| |
| #define VDAC_CONFIG_SD_V3 0x0E21A6B6 |
| #define VDAC_CONFIG_SD_V2 0x081141CF |
| /* |
| * setting NTSC mode |
| */ |
| static int venc_set_ntsc(struct v4l2_subdev *sd) |
| { |
| struct venc_state *venc = to_state(sd); |
| struct venc_platform_data *pdata = venc->pdata; |
| |
| v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n"); |
| |
| /* Setup clock at VPSS & VENC for SD */ |
| vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); |
| if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0) |
| return -EINVAL; |
| |
| venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_525_60); |
| venc_enabledigitaloutput(sd, 0); |
| |
| if (venc->venc_type == VPBE_VERSION_3) { |
| venc_write(sd, VENC_CLKCTL, 0x01); |
| venc_write(sd, VENC_VIDCTL, 0); |
| vdaccfg_write(sd, VDAC_CONFIG_SD_V3); |
| } else if (venc->venc_type == VPBE_VERSION_2) { |
| venc_write(sd, VENC_CLKCTL, 0x01); |
| venc_write(sd, VENC_VIDCTL, 0); |
| vdaccfg_write(sd, VDAC_CONFIG_SD_V2); |
| } else { |
| /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ |
| venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); |
| /* Set REC656 Mode */ |
| venc_write(sd, VENC_YCCCTL, 0x1); |
| venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ); |
| venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS); |
| } |
| |
| venc_write(sd, VENC_VMOD, 0); |
| venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), |
| VENC_VMOD_VIE); |
| venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); |
| venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT), |
| VENC_VMOD_TVTYP); |
| venc_write(sd, VENC_DACTST, 0x0); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); |
| |
| return 0; |
| } |
| |
| /* |
| * setting PAL mode |
| */ |
| static int venc_set_pal(struct v4l2_subdev *sd) |
| { |
| struct venc_state *venc = to_state(sd); |
| |
| v4l2_dbg(debug, 2, sd, "venc_set_pal\n"); |
| |
| /* Setup clock at VPSS & VENC for SD */ |
| vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); |
| if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0) |
| return -EINVAL; |
| |
| venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_625_50); |
| venc_enabledigitaloutput(sd, 0); |
| |
| if (venc->venc_type == VPBE_VERSION_3) { |
| venc_write(sd, VENC_CLKCTL, 0x1); |
| venc_write(sd, VENC_VIDCTL, 0); |
| vdaccfg_write(sd, VDAC_CONFIG_SD_V3); |
| } else if (venc->venc_type == VPBE_VERSION_2) { |
| venc_write(sd, VENC_CLKCTL, 0x1); |
| venc_write(sd, VENC_VIDCTL, 0); |
| vdaccfg_write(sd, VDAC_CONFIG_SD_V2); |
| } else { |
| /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ |
| venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); |
| /* Set REC656 Mode */ |
| venc_write(sd, VENC_YCCCTL, 0x1); |
| } |
| |
| venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT, |
| VENC_SYNCCTL_OVD); |
| venc_write(sd, VENC_VMOD, 0); |
| venc_modify(sd, VENC_VMOD, |
| (1 << VENC_VMOD_VIE_SHIFT), |
| VENC_VMOD_VIE); |
| venc_modify(sd, VENC_VMOD, |
| (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); |
| venc_modify(sd, VENC_VMOD, |
| (1 << VENC_VMOD_TVTYP_SHIFT), |
| VENC_VMOD_TVTYP); |
| venc_write(sd, VENC_DACTST, 0x0); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); |
| |
| return 0; |
| } |
| |
| #define VDAC_CONFIG_HD_V2 0x081141EF |
| /* |
| * venc_set_480p59_94 |
| * |
| * This function configures the video encoder to EDTV(525p) component setting. |
| */ |
| static int venc_set_480p59_94(struct v4l2_subdev *sd) |
| { |
| struct venc_state *venc = to_state(sd); |
| struct venc_platform_data *pdata = venc->pdata; |
| |
| v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n"); |
| if (venc->venc_type != VPBE_VERSION_1 && |
| venc->venc_type != VPBE_VERSION_2) |
| return -EINVAL; |
| |
| /* Setup clock at VPSS & VENC for SD */ |
| if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0) |
| return -EINVAL; |
| |
| venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000); |
| venc_enabledigitaloutput(sd, 0); |
| |
| if (venc->venc_type == VPBE_VERSION_2) |
| vdaccfg_write(sd, VDAC_CONFIG_HD_V2); |
| venc_write(sd, VENC_OSDCLK0, 0); |
| venc_write(sd, VENC_OSDCLK1, 1); |
| |
| if (venc->venc_type == VPBE_VERSION_1) { |
| venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, |
| VENC_VDPRO_DAFRQ); |
| venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, |
| VENC_VDPRO_DAUPS); |
| } |
| |
| venc_write(sd, VENC_VMOD, 0); |
| venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), |
| VENC_VMOD_VIE); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); |
| venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT), |
| VENC_VMOD_TVTYP); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << |
| VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); |
| |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); |
| |
| return 0; |
| } |
| |
| /* |
| * venc_set_625p |
| * |
| * This function configures the video encoder to HDTV(625p) component setting |
| */ |
| static int venc_set_576p50(struct v4l2_subdev *sd) |
| { |
| struct venc_state *venc = to_state(sd); |
| struct venc_platform_data *pdata = venc->pdata; |
| |
| v4l2_dbg(debug, 2, sd, "venc_set_576p50\n"); |
| |
| if (venc->venc_type != VPBE_VERSION_1 && |
| venc->venc_type != VPBE_VERSION_2) |
| return -EINVAL; |
| /* Setup clock at VPSS & VENC for SD */ |
| if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0) |
| return -EINVAL; |
| |
| venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000); |
| venc_enabledigitaloutput(sd, 0); |
| |
| if (venc->venc_type == VPBE_VERSION_2) |
| vdaccfg_write(sd, VDAC_CONFIG_HD_V2); |
| |
| venc_write(sd, VENC_OSDCLK0, 0); |
| venc_write(sd, VENC_OSDCLK1, 1); |
| |
| if (venc->venc_type == VPBE_VERSION_1) { |
| venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, |
| VENC_VDPRO_DAFRQ); |
| venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, |
| VENC_VDPRO_DAUPS); |
| } |
| |
| venc_write(sd, VENC_VMOD, 0); |
| venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), |
| VENC_VMOD_VIE); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); |
| venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT), |
| VENC_VMOD_TVTYP); |
| |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << |
| VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); |
| |
| return 0; |
| } |
| |
| /* |
| * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only |
| */ |
| static int venc_set_720p60_internal(struct v4l2_subdev *sd) |
| { |
| struct venc_state *venc = to_state(sd); |
| struct venc_platform_data *pdata = venc->pdata; |
| |
| if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0) |
| return -EINVAL; |
| |
| venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000); |
| venc_enabledigitaloutput(sd, 0); |
| |
| venc_write(sd, VENC_OSDCLK0, 0); |
| venc_write(sd, VENC_OSDCLK1, 1); |
| |
| venc_write(sd, VENC_VMOD, 0); |
| /* DM365 component HD mode */ |
| venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), |
| VENC_VMOD_VIE); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); |
| venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT), |
| VENC_VMOD_TVTYP); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); |
| venc_write(sd, VENC_XHINTVL, 0); |
| return 0; |
| } |
| |
| /* |
| * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only |
| */ |
| static int venc_set_1080i30_internal(struct v4l2_subdev *sd) |
| { |
| struct venc_state *venc = to_state(sd); |
| struct venc_platform_data *pdata = venc->pdata; |
| |
| if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0) |
| return -EINVAL; |
| |
| venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000); |
| venc_enabledigitaloutput(sd, 0); |
| |
| venc_write(sd, VENC_OSDCLK0, 0); |
| venc_write(sd, VENC_OSDCLK1, 1); |
| |
| |
| venc_write(sd, VENC_VMOD, 0); |
| /* DM365 component HD mode */ |
| venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), |
| VENC_VMOD_VIE); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); |
| venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT), |
| VENC_VMOD_TVTYP); |
| venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); |
| venc_write(sd, VENC_XHINTVL, 0); |
| return 0; |
| } |
| |
| static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) |
| { |
| v4l2_dbg(debug, 1, sd, "venc_s_std_output\n"); |
| |
| if (norm & V4L2_STD_525_60) |
| return venc_set_ntsc(sd); |
| else if (norm & V4L2_STD_625_50) |
| return venc_set_pal(sd); |
| |
| return -EINVAL; |
| } |
| |
| static int venc_s_dv_timings(struct v4l2_subdev *sd, |
| struct v4l2_dv_timings *dv_timings) |
| { |
| struct venc_state *venc = to_state(sd); |
| u32 height = dv_timings->bt.height; |
| int ret; |
| |
| v4l2_dbg(debug, 1, sd, "venc_s_dv_timings\n"); |
| |
| if (height == 576) |
| return venc_set_576p50(sd); |
| else if (height == 480) |
| return venc_set_480p59_94(sd); |
| else if ((height == 720) && |
| (venc->venc_type == VPBE_VERSION_2)) { |
| /* TBD setup internal 720p mode here */ |
| ret = venc_set_720p60_internal(sd); |
| /* for DM365 VPBE, there is DAC inside */ |
| vdaccfg_write(sd, VDAC_CONFIG_HD_V2); |
| return ret; |
| } else if ((height == 1080) && |
| (venc->venc_type == VPBE_VERSION_2)) { |
| /* TBD setup internal 1080i mode here */ |
| ret = venc_set_1080i30_internal(sd); |
| /* for DM365 VPBE, there is DAC inside */ |
| vdaccfg_write(sd, VDAC_CONFIG_HD_V2); |
| return ret; |
| } |
| return -EINVAL; |
| } |
| |
| static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, |
| u32 config) |
| { |
| struct venc_state *venc = to_state(sd); |
| int ret; |
| |
| v4l2_dbg(debug, 1, sd, "venc_s_routing\n"); |
| |
| ret = venc_set_dac(sd, output); |
| if (!ret) |
| venc->output = output; |
| |
| return ret; |
| } |
| |
| static long venc_command(struct v4l2_subdev *sd, unsigned int cmd, void *arg) |
| { |
| u32 val; |
| |
| switch (cmd) { |
| case VENC_GET_FLD: |
| val = venc_read(sd, VENC_VSTAT); |
| *((int *)arg) = ((val & VENC_VSTAT_FIDST) == |
| VENC_VSTAT_FIDST); |
| break; |
| default: |
| v4l2_err(sd, "Wrong IOCTL cmd\n"); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops venc_core_ops = { |
| .command = venc_command, |
| }; |
| |
| static const struct v4l2_subdev_video_ops venc_video_ops = { |
| .s_routing = venc_s_routing, |
| .s_std_output = venc_s_std_output, |
| .s_dv_timings = venc_s_dv_timings, |
| }; |
| |
| static const struct v4l2_subdev_ops venc_ops = { |
| .core = &venc_core_ops, |
| .video = &venc_video_ops, |
| }; |
| |
| static int venc_initialize(struct v4l2_subdev *sd) |
| { |
| struct venc_state *venc = to_state(sd); |
| int ret; |
| |
| /* Set default to output to composite and std to NTSC */ |
| venc->output = 0; |
| venc->std = V4L2_STD_525_60; |
| |
| ret = venc_s_routing(sd, 0, venc->output, 0); |
| if (ret < 0) { |
| v4l2_err(sd, "Error setting output during init\n"); |
| return -EINVAL; |
| } |
| |
| ret = venc_s_std_output(sd, venc->std); |
| if (ret < 0) { |
| v4l2_err(sd, "Error setting std during init\n"); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int venc_device_get(struct device *dev, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct venc_state **venc = data; |
| |
| if (strstr(pdev->name, "vpbe-venc") != NULL) |
| *venc = platform_get_drvdata(pdev); |
| |
| return 0; |
| } |
| |
| struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, |
| const char *venc_name) |
| { |
| struct venc_state *venc = NULL; |
| |
| bus_for_each_dev(&platform_bus_type, NULL, &venc, |
| venc_device_get); |
| if (venc == NULL) |
| return NULL; |
| |
| v4l2_subdev_init(&venc->sd, &venc_ops); |
| |
| strscpy(venc->sd.name, venc_name, sizeof(venc->sd.name)); |
| if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) { |
| v4l2_err(v4l2_dev, |
| "vpbe unable to register venc sub device\n"); |
| return NULL; |
| } |
| if (venc_initialize(&venc->sd)) { |
| v4l2_err(v4l2_dev, |
| "vpbe venc initialization failed\n"); |
| return NULL; |
| } |
| |
| return &venc->sd; |
| } |
| EXPORT_SYMBOL(venc_sub_dev_init); |
| |
| static int venc_probe(struct platform_device *pdev) |
| { |
| const struct platform_device_id *pdev_id; |
| struct venc_state *venc; |
| struct resource *res; |
| |
| if (!pdev->dev.platform_data) { |
| dev_err(&pdev->dev, "No platform data for VENC sub device"); |
| return -EINVAL; |
| } |
| |
| pdev_id = platform_get_device_id(pdev); |
| if (!pdev_id) |
| return -EINVAL; |
| |
| venc = devm_kzalloc(&pdev->dev, sizeof(struct venc_state), GFP_KERNEL); |
| if (venc == NULL) |
| return -ENOMEM; |
| |
| venc->venc_type = pdev_id->driver_data; |
| venc->pdev = &pdev->dev; |
| venc->pdata = pdev->dev.platform_data; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| venc->venc_base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(venc->venc_base)) |
| return PTR_ERR(venc->venc_base); |
| |
| if (venc->venc_type != VPBE_VERSION_1) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| |
| venc->vdaccfg_reg = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(venc->vdaccfg_reg)) |
| return PTR_ERR(venc->vdaccfg_reg); |
| } |
| spin_lock_init(&venc->lock); |
| platform_set_drvdata(pdev, venc); |
| dev_notice(venc->pdev, "VENC sub device probe success\n"); |
| |
| return 0; |
| } |
| |
| static int venc_remove(struct platform_device *pdev) |
| { |
| return 0; |
| } |
| |
| static struct platform_driver venc_driver = { |
| .probe = venc_probe, |
| .remove = venc_remove, |
| .driver = { |
| .name = MODULE_NAME, |
| }, |
| .id_table = vpbe_venc_devtype |
| }; |
| |
| module_platform_driver(venc_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("VPBE VENC Driver"); |
| MODULE_AUTHOR("Texas Instruments"); |