| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * CompactPCI Hot Plug Driver |
| * |
| * Copyright (C) 2002,2005 SOMA Networks, Inc. |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * |
| * All rights reserved. |
| * |
| * Send feedback to <scottm@somanetworks.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched/signal.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/atomic.h> |
| #include <linux/delay.h> |
| #include <linux/kthread.h> |
| #include "cpci_hotplug.h" |
| |
| #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>" |
| #define DRIVER_DESC "CompactPCI Hot Plug Core" |
| |
| #define MY_NAME "cpci_hotplug" |
| |
| #define dbg(format, arg...) \ |
| do { \ |
| if (cpci_debug) \ |
| printk(KERN_DEBUG "%s: " format "\n", \ |
| MY_NAME, ## arg); \ |
| } while (0) |
| #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg) |
| #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg) |
| #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg) |
| |
| /* local variables */ |
| static DECLARE_RWSEM(list_rwsem); |
| static LIST_HEAD(slot_list); |
| static int slots; |
| static atomic_t extracting; |
| int cpci_debug; |
| static struct cpci_hp_controller *controller; |
| static struct task_struct *cpci_thread; |
| static int thread_finished; |
| |
| static int enable_slot(struct hotplug_slot *slot); |
| static int disable_slot(struct hotplug_slot *slot); |
| static int set_attention_status(struct hotplug_slot *slot, u8 value); |
| static int get_power_status(struct hotplug_slot *slot, u8 *value); |
| static int get_attention_status(struct hotplug_slot *slot, u8 *value); |
| static int get_adapter_status(struct hotplug_slot *slot, u8 *value); |
| static int get_latch_status(struct hotplug_slot *slot, u8 *value); |
| |
| static const struct hotplug_slot_ops cpci_hotplug_slot_ops = { |
| .enable_slot = enable_slot, |
| .disable_slot = disable_slot, |
| .set_attention_status = set_attention_status, |
| .get_power_status = get_power_status, |
| .get_attention_status = get_attention_status, |
| .get_adapter_status = get_adapter_status, |
| .get_latch_status = get_latch_status, |
| }; |
| |
| static int |
| enable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = to_slot(hotplug_slot); |
| int retval = 0; |
| |
| dbg("%s - physical_slot = %s", __func__, slot_name(slot)); |
| |
| if (controller->ops->set_power) |
| retval = controller->ops->set_power(slot, 1); |
| return retval; |
| } |
| |
| static int |
| disable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct slot *slot = to_slot(hotplug_slot); |
| int retval = 0; |
| |
| dbg("%s - physical_slot = %s", __func__, slot_name(slot)); |
| |
| down_write(&list_rwsem); |
| |
| /* Unconfigure device */ |
| dbg("%s - unconfiguring slot %s", __func__, slot_name(slot)); |
| retval = cpci_unconfigure_slot(slot); |
| if (retval) { |
| err("%s - could not unconfigure slot %s", |
| __func__, slot_name(slot)); |
| goto disable_error; |
| } |
| dbg("%s - finished unconfiguring slot %s", __func__, slot_name(slot)); |
| |
| /* Clear EXT (by setting it) */ |
| if (cpci_clear_ext(slot)) { |
| err("%s - could not clear EXT for slot %s", |
| __func__, slot_name(slot)); |
| retval = -ENODEV; |
| goto disable_error; |
| } |
| cpci_led_on(slot); |
| |
| if (controller->ops->set_power) { |
| retval = controller->ops->set_power(slot, 0); |
| if (retval) |
| goto disable_error; |
| } |
| |
| slot->adapter_status = 0; |
| |
| if (slot->extracting) { |
| slot->extracting = 0; |
| atomic_dec(&extracting); |
| } |
| disable_error: |
| up_write(&list_rwsem); |
| return retval; |
| } |
| |
| static u8 |
| cpci_get_power_status(struct slot *slot) |
| { |
| u8 power = 1; |
| |
| if (controller->ops->get_power) |
| power = controller->ops->get_power(slot); |
| return power; |
| } |
| |
| static int |
| get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct slot *slot = to_slot(hotplug_slot); |
| |
| *value = cpci_get_power_status(slot); |
| return 0; |
| } |
| |
| static int |
| get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct slot *slot = to_slot(hotplug_slot); |
| |
| *value = cpci_get_attention_status(slot); |
| return 0; |
| } |
| |
| static int |
| set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) |
| { |
| return cpci_set_attention_status(to_slot(hotplug_slot), status); |
| } |
| |
| static int |
| get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct slot *slot = to_slot(hotplug_slot); |
| |
| *value = slot->adapter_status; |
| return 0; |
| } |
| |
| static int |
| get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct slot *slot = to_slot(hotplug_slot); |
| |
| *value = slot->latch_status; |
| return 0; |
| } |
| |
| static void release_slot(struct slot *slot) |
| { |
| pci_dev_put(slot->dev); |
| kfree(slot); |
| } |
| |
| #define SLOT_NAME_SIZE 6 |
| |
| int |
| cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) |
| { |
| struct slot *slot; |
| char name[SLOT_NAME_SIZE]; |
| int status; |
| int i; |
| |
| if (!(controller && bus)) |
| return -ENODEV; |
| |
| /* |
| * Create a structure for each slot, and register that slot |
| * with the pci_hotplug subsystem. |
| */ |
| for (i = first; i <= last; ++i) { |
| slot = kzalloc(sizeof(struct slot), GFP_KERNEL); |
| if (!slot) { |
| status = -ENOMEM; |
| goto error; |
| } |
| |
| slot->bus = bus; |
| slot->number = i; |
| slot->devfn = PCI_DEVFN(i, 0); |
| |
| snprintf(name, SLOT_NAME_SIZE, "%02x:%02x", bus->number, i); |
| |
| slot->hotplug_slot.ops = &cpci_hotplug_slot_ops; |
| |
| dbg("registering slot %s", name); |
| status = pci_hp_register(&slot->hotplug_slot, bus, i, name); |
| if (status) { |
| err("pci_hp_register failed with error %d", status); |
| goto error_slot; |
| } |
| dbg("slot registered with name: %s", slot_name(slot)); |
| |
| /* Add slot to our internal list */ |
| down_write(&list_rwsem); |
| list_add(&slot->slot_list, &slot_list); |
| slots++; |
| up_write(&list_rwsem); |
| } |
| return 0; |
| error_slot: |
| kfree(slot); |
| error: |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cpci_hp_register_bus); |
| |
| int |
| cpci_hp_unregister_bus(struct pci_bus *bus) |
| { |
| struct slot *slot; |
| struct slot *tmp; |
| int status = 0; |
| |
| down_write(&list_rwsem); |
| if (!slots) { |
| up_write(&list_rwsem); |
| return -1; |
| } |
| list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { |
| if (slot->bus == bus) { |
| list_del(&slot->slot_list); |
| slots--; |
| |
| dbg("deregistering slot %s", slot_name(slot)); |
| pci_hp_deregister(&slot->hotplug_slot); |
| release_slot(slot); |
| } |
| } |
| up_write(&list_rwsem); |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cpci_hp_unregister_bus); |
| |
| /* This is the interrupt mode interrupt handler */ |
| static irqreturn_t |
| cpci_hp_intr(int irq, void *data) |
| { |
| dbg("entered cpci_hp_intr"); |
| |
| /* Check to see if it was our interrupt */ |
| if ((controller->irq_flags & IRQF_SHARED) && |
| !controller->ops->check_irq(controller->dev_id)) { |
| dbg("exited cpci_hp_intr, not our interrupt"); |
| return IRQ_NONE; |
| } |
| |
| /* Disable ENUM interrupt */ |
| controller->ops->disable_irq(); |
| |
| /* Trigger processing by the event thread */ |
| wake_up_process(cpci_thread); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * According to PICMG 2.1 R2.0, section 6.3.2, upon |
| * initialization, the system driver shall clear the |
| * INS bits of the cold-inserted devices. |
| */ |
| static int |
| init_slots(int clear_ins) |
| { |
| struct slot *slot; |
| struct pci_dev *dev; |
| |
| dbg("%s - enter", __func__); |
| down_read(&list_rwsem); |
| if (!slots) { |
| up_read(&list_rwsem); |
| return -1; |
| } |
| list_for_each_entry(slot, &slot_list, slot_list) { |
| dbg("%s - looking at slot %s", __func__, slot_name(slot)); |
| if (clear_ins && cpci_check_and_clear_ins(slot)) |
| dbg("%s - cleared INS for slot %s", |
| __func__, slot_name(slot)); |
| dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0)); |
| if (dev) { |
| slot->adapter_status = 1; |
| slot->latch_status = 1; |
| slot->dev = dev; |
| } |
| } |
| up_read(&list_rwsem); |
| dbg("%s - exit", __func__); |
| return 0; |
| } |
| |
| static int |
| check_slots(void) |
| { |
| struct slot *slot; |
| int extracted; |
| int inserted; |
| u16 hs_csr; |
| |
| down_read(&list_rwsem); |
| if (!slots) { |
| up_read(&list_rwsem); |
| err("no slots registered, shutting down"); |
| return -1; |
| } |
| extracted = inserted = 0; |
| list_for_each_entry(slot, &slot_list, slot_list) { |
| dbg("%s - looking at slot %s", __func__, slot_name(slot)); |
| if (cpci_check_and_clear_ins(slot)) { |
| /* |
| * Some broken hardware (e.g. PLX 9054AB) asserts |
| * ENUM# twice... |
| */ |
| if (slot->dev) { |
| warn("slot %s already inserted", |
| slot_name(slot)); |
| inserted++; |
| continue; |
| } |
| |
| /* Process insertion */ |
| dbg("%s - slot %s inserted", __func__, slot_name(slot)); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR (1) = %04x", |
| __func__, slot_name(slot), hs_csr); |
| |
| /* Configure device */ |
| dbg("%s - configuring slot %s", |
| __func__, slot_name(slot)); |
| if (cpci_configure_slot(slot)) { |
| err("%s - could not configure slot %s", |
| __func__, slot_name(slot)); |
| continue; |
| } |
| dbg("%s - finished configuring slot %s", |
| __func__, slot_name(slot)); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR (2) = %04x", |
| __func__, slot_name(slot), hs_csr); |
| |
| slot->latch_status = 1; |
| slot->adapter_status = 1; |
| |
| cpci_led_off(slot); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR (3) = %04x", |
| __func__, slot_name(slot), hs_csr); |
| |
| inserted++; |
| } else if (cpci_check_ext(slot)) { |
| /* Process extraction request */ |
| dbg("%s - slot %s extracted", |
| __func__, slot_name(slot)); |
| |
| /* GSM, debug */ |
| hs_csr = cpci_get_hs_csr(slot); |
| dbg("%s - slot %s HS_CSR = %04x", |
| __func__, slot_name(slot), hs_csr); |
| |
| if (!slot->extracting) { |
| slot->latch_status = 0; |
| slot->extracting = 1; |
| atomic_inc(&extracting); |
| } |
| extracted++; |
| } else if (slot->extracting) { |
| hs_csr = cpci_get_hs_csr(slot); |
| if (hs_csr == 0xffff) { |
| /* |
| * Hmmm, we're likely hosed at this point, should we |
| * bother trying to tell the driver or not? |
| */ |
| err("card in slot %s was improperly removed", |
| slot_name(slot)); |
| slot->adapter_status = 0; |
| slot->extracting = 0; |
| atomic_dec(&extracting); |
| } |
| } |
| } |
| up_read(&list_rwsem); |
| dbg("inserted=%d, extracted=%d, extracting=%d", |
| inserted, extracted, atomic_read(&extracting)); |
| if (inserted || extracted) |
| return extracted; |
| else if (!atomic_read(&extracting)) { |
| err("cannot find ENUM# source, shutting down"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* This is the interrupt mode worker thread body */ |
| static int |
| event_thread(void *data) |
| { |
| int rc; |
| |
| dbg("%s - event thread started", __func__); |
| while (1) { |
| dbg("event thread sleeping"); |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule(); |
| if (kthread_should_stop()) |
| break; |
| do { |
| rc = check_slots(); |
| if (rc > 0) { |
| /* Give userspace a chance to handle extraction */ |
| msleep(500); |
| } else if (rc < 0) { |
| dbg("%s - error checking slots", __func__); |
| thread_finished = 1; |
| goto out; |
| } |
| } while (atomic_read(&extracting) && !kthread_should_stop()); |
| if (kthread_should_stop()) |
| break; |
| |
| /* Re-enable ENUM# interrupt */ |
| dbg("%s - re-enabling irq", __func__); |
| controller->ops->enable_irq(); |
| } |
| out: |
| return 0; |
| } |
| |
| /* This is the polling mode worker thread body */ |
| static int |
| poll_thread(void *data) |
| { |
| int rc; |
| |
| while (1) { |
| if (kthread_should_stop() || signal_pending(current)) |
| break; |
| if (controller->ops->query_enum()) { |
| do { |
| rc = check_slots(); |
| if (rc > 0) { |
| /* Give userspace a chance to handle extraction */ |
| msleep(500); |
| } else if (rc < 0) { |
| dbg("%s - error checking slots", __func__); |
| thread_finished = 1; |
| goto out; |
| } |
| } while (atomic_read(&extracting) && !kthread_should_stop()); |
| } |
| msleep(100); |
| } |
| out: |
| return 0; |
| } |
| |
| static int |
| cpci_start_thread(void) |
| { |
| if (controller->irq) |
| cpci_thread = kthread_run(event_thread, NULL, "cpci_hp_eventd"); |
| else |
| cpci_thread = kthread_run(poll_thread, NULL, "cpci_hp_polld"); |
| if (IS_ERR(cpci_thread)) { |
| err("Can't start up our thread"); |
| return PTR_ERR(cpci_thread); |
| } |
| thread_finished = 0; |
| return 0; |
| } |
| |
| static void |
| cpci_stop_thread(void) |
| { |
| kthread_stop(cpci_thread); |
| thread_finished = 1; |
| } |
| |
| int |
| cpci_hp_register_controller(struct cpci_hp_controller *new_controller) |
| { |
| int status = 0; |
| |
| if (controller) |
| return -1; |
| if (!(new_controller && new_controller->ops)) |
| return -EINVAL; |
| if (new_controller->irq) { |
| if (!(new_controller->ops->enable_irq && |
| new_controller->ops->disable_irq)) |
| status = -EINVAL; |
| if (request_irq(new_controller->irq, |
| cpci_hp_intr, |
| new_controller->irq_flags, |
| MY_NAME, |
| new_controller->dev_id)) { |
| err("Can't get irq %d for the hotplug cPCI controller", |
| new_controller->irq); |
| status = -ENODEV; |
| } |
| dbg("%s - acquired controller irq %d", |
| __func__, new_controller->irq); |
| } |
| if (!status) |
| controller = new_controller; |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cpci_hp_register_controller); |
| |
| static void |
| cleanup_slots(void) |
| { |
| struct slot *slot; |
| struct slot *tmp; |
| |
| /* |
| * Unregister all of our slots with the pci_hotplug subsystem, |
| * and free up all memory that we had allocated. |
| */ |
| down_write(&list_rwsem); |
| if (!slots) |
| goto cleanup_null; |
| list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { |
| list_del(&slot->slot_list); |
| pci_hp_deregister(&slot->hotplug_slot); |
| release_slot(slot); |
| } |
| cleanup_null: |
| up_write(&list_rwsem); |
| } |
| |
| int |
| cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller) |
| { |
| int status = 0; |
| |
| if (controller) { |
| if (!thread_finished) |
| cpci_stop_thread(); |
| if (controller->irq) |
| free_irq(controller->irq, controller->dev_id); |
| controller = NULL; |
| cleanup_slots(); |
| } else |
| status = -ENODEV; |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cpci_hp_unregister_controller); |
| |
| int |
| cpci_hp_start(void) |
| { |
| static int first = 1; |
| int status; |
| |
| dbg("%s - enter", __func__); |
| if (!controller) |
| return -ENODEV; |
| |
| down_read(&list_rwsem); |
| if (list_empty(&slot_list)) { |
| up_read(&list_rwsem); |
| return -ENODEV; |
| } |
| up_read(&list_rwsem); |
| |
| status = init_slots(first); |
| if (first) |
| first = 0; |
| if (status) |
| return status; |
| |
| status = cpci_start_thread(); |
| if (status) |
| return status; |
| dbg("%s - thread started", __func__); |
| |
| if (controller->irq) { |
| /* Start enum interrupt processing */ |
| dbg("%s - enabling irq", __func__); |
| controller->ops->enable_irq(); |
| } |
| dbg("%s - exit", __func__); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cpci_hp_start); |
| |
| int |
| cpci_hp_stop(void) |
| { |
| if (!controller) |
| return -ENODEV; |
| if (controller->irq) { |
| /* Stop enum interrupt processing */ |
| dbg("%s - disabling irq", __func__); |
| controller->ops->disable_irq(); |
| } |
| cpci_stop_thread(); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cpci_hp_stop); |
| |
| int __init |
| cpci_hotplug_init(int debug) |
| { |
| cpci_debug = debug; |
| return 0; |
| } |