| /* |
| * Copyright 2013 Maxime Ripard |
| * |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/thermal/thermal.h> |
| #include <dt-bindings/dma/sun4i-a10.h> |
| #include <dt-bindings/clock/sun7i-a20-ccu.h> |
| #include <dt-bindings/reset/sun4i-a10-ccu.h> |
| #include <dt-bindings/pinctrl/sun4i-a10.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &gmac; |
| }; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| framebuffer-lcd0-hdmi { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0-hdmi"; |
| clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, |
| <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, |
| <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>, |
| <&ccu CLK_HDMI>; |
| status = "disabled"; |
| }; |
| |
| framebuffer-lcd0 { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0"; |
| clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, |
| <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>, |
| <&ccu CLK_DRAM_DE_BE0>; |
| status = "disabled"; |
| }; |
| |
| framebuffer-lcd0-tve0 { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "de_be0-lcd0-tve0"; |
| clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, |
| <&ccu CLK_AHB_DE_BE0>, |
| <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>, |
| <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| clocks = <&ccu CLK_CPU>; |
| clock-latency = <244144>; /* 8 32k periods */ |
| operating-points = < |
| /* kHz uV */ |
| 960000 1400000 |
| 912000 1400000 |
| 864000 1300000 |
| 720000 1200000 |
| 528000 1100000 |
| 312000 1000000 |
| 144000 1000000 |
| >; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| clocks = <&ccu CLK_CPU>; |
| clock-latency = <244144>; /* 8 32k periods */ |
| operating-points = < |
| /* kHz uV */ |
| 960000 1400000 |
| 912000 1400000 |
| 864000 1300000 |
| 720000 1200000 |
| 528000 1100000 |
| 312000 1000000 |
| 144000 1000000 |
| >; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu-thermal { |
| /* milliseconds */ |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| thermal-sensors = <&rtp>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| cpu_alert0: cpu_alert0 { |
| /* milliCelsius */ |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_crit: cpu_crit { |
| /* milliCelsius */ |
| temperature = <100000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ |
| default-pool { |
| compatible = "shared-dma-pool"; |
| size = <0x6000000>; |
| alloc-ranges = <0x40000000 0x10000000>; |
| reusable; |
| linux,cma-default; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc24M: clk-24M { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc32k: clk-32k { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "osc32k"; |
| }; |
| |
| /* |
| * The following two are dummy clocks, placeholders |
| * used in the gmac_tx clock. The gmac driver will |
| * choose one parent depending on the PHY interface |
| * mode, using clk_set_rate auto-reparenting. |
| * |
| * The actual TX clock rate is not controlled by the |
| * gmac_tx clock. |
| */ |
| mii_phy_tx_clk: clk-mii-phy-tx { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <25000000>; |
| clock-output-names = "mii_phy_tx"; |
| }; |
| |
| gmac_int_tx_clk: clk-gmac-int-tx { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <125000000>; |
| clock-output-names = "gmac_int_tx"; |
| }; |
| |
| gmac_tx_clk: clk@1c20164 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun7i-a20-gmac-clk"; |
| reg = <0x01c20164 0x4>; |
| clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; |
| clock-output-names = "gmac_tx"; |
| }; |
| }; |
| |
| |
| de: display-engine { |
| compatible = "allwinner,sun7i-a20-display-engine"; |
| allwinner,pipelines = <&fe0>, <&fe1>; |
| status = "disabled"; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| system-control@1c00000 { |
| compatible = "allwinner,sun7i-a20-system-control", |
| "allwinner,sun4i-a10-system-control"; |
| reg = <0x01c00000 0x30>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram_a: sram@0 { |
| compatible = "mmio-sram"; |
| reg = <0x00000000 0xc000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00000000 0xc000>; |
| |
| emac_sram: sram-section@8000 { |
| compatible = "allwinner,sun7i-a20-sram-a3-a4", |
| "allwinner,sun4i-a10-sram-a3-a4"; |
| reg = <0x8000 0x4000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sram_d: sram@10000 { |
| compatible = "mmio-sram"; |
| reg = <0x00010000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00010000 0x1000>; |
| |
| otg_sram: sram-section@0 { |
| compatible = "allwinner,sun7i-a20-sram-d", |
| "allwinner,sun4i-a10-sram-d"; |
| reg = <0x0000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sram_c: sram@1d00000 { |
| compatible = "mmio-sram"; |
| reg = <0x01d00000 0xd0000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x01d00000 0xd0000>; |
| |
| ve_sram: sram-section@0 { |
| compatible = "allwinner,sun7i-a20-sram-c1", |
| "allwinner,sun4i-a10-sram-c1"; |
| reg = <0x000000 0x80000>; |
| }; |
| }; |
| }; |
| |
| nmi_intc: interrupt-controller@1c00030 { |
| compatible = "allwinner,sun7i-a20-sc-nmi"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x01c00030 0x0c>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| dma: dma-controller@1c02000 { |
| compatible = "allwinner,sun4i-a10-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_DMA>; |
| #dma-cells = <2>; |
| }; |
| |
| nfc: nand-controller@1c03000 { |
| compatible = "allwinner,sun4i-a10-nand"; |
| reg = <0x01c03000 0x1000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 3>; |
| dma-names = "rxtx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi0: spi@1c05000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c05000 0x1000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 27>, |
| <&dma SUN4I_DMA_DEDICATED 26>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| num-cs = <4>; |
| }; |
| |
| spi1: spi@1c06000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c06000 0x1000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 9>, |
| <&dma SUN4I_DMA_DEDICATED 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| num-cs = <1>; |
| }; |
| |
| csi0: csi@1c09000 { |
| compatible = "allwinner,sun7i-a20-csi0"; |
| reg = <0x01c09000 0x1000>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; |
| clock-names = "bus", "isp", "ram"; |
| resets = <&ccu RST_CSI0>; |
| status = "disabled"; |
| }; |
| |
| emac: ethernet@1c0b000 { |
| compatible = "allwinner,sun4i-a10-emac"; |
| reg = <0x01c0b000 0x1000>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_EMAC>; |
| allwinner,sram = <&emac_sram 1>; |
| status = "disabled"; |
| }; |
| |
| mdio: mdio@1c0b080 { |
| compatible = "allwinner,sun4i-a10-mdio"; |
| reg = <0x01c0b080 0x14>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| tcon0: lcd-controller@1c0c000 { |
| compatible = "allwinner,sun7i-a20-tcon0", |
| "allwinner,sun7i-a20-tcon"; |
| reg = <0x01c0c000 0x1000>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>; |
| reset-names = "lcd", "lvds"; |
| clocks = <&ccu CLK_AHB_LCD0>, |
| <&ccu CLK_TCON0_CH0>, |
| <&ccu CLK_TCON0_CH1>; |
| clock-names = "ahb", |
| "tcon-ch0", |
| "tcon-ch1"; |
| clock-output-names = "tcon0-pixel-clock"; |
| #clock-cells = <0>; |
| dmas = <&dma SUN4I_DMA_DEDICATED 14>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon0_in_be0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&be0_out_tcon0>; |
| }; |
| |
| tcon0_in_be1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&be1_out_tcon0>; |
| }; |
| }; |
| |
| tcon0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon0_out_hdmi: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&hdmi_in_tcon0>; |
| allwinner,tcon-channel = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| tcon1: lcd-controller@1c0d000 { |
| compatible = "allwinner,sun7i-a20-tcon1", |
| "allwinner,sun7i-a20-tcon"; |
| reg = <0x01c0d000 0x1000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&ccu RST_TCON1>; |
| reset-names = "lcd"; |
| clocks = <&ccu CLK_AHB_LCD1>, |
| <&ccu CLK_TCON1_CH0>, |
| <&ccu CLK_TCON1_CH1>; |
| clock-names = "ahb", |
| "tcon-ch0", |
| "tcon-ch1"; |
| clock-output-names = "tcon1-pixel-clock"; |
| #clock-cells = <0>; |
| dmas = <&dma SUN4I_DMA_DEDICATED 15>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon1_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon1_in_be0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&be0_out_tcon1>; |
| }; |
| |
| tcon1_in_be1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&be1_out_tcon1>; |
| }; |
| }; |
| |
| tcon1_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon1_out_hdmi: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&hdmi_in_tcon1>; |
| allwinner,tcon-channel = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| video-codec@1c0e000 { |
| compatible = "allwinner,sun7i-a20-video-engine"; |
| reg = <0x01c0e000 0x1000>; |
| clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, |
| <&ccu CLK_DRAM_VE>; |
| clock-names = "ahb", "mod", "ram"; |
| resets = <&ccu RST_VE>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| allwinner,sram = <&ve_sram 1>; |
| }; |
| |
| mmc0: mmc@1c0f000 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ccu CLK_AHB_MMC0>, |
| <&ccu CLK_MMC0>, |
| <&ccu CLK_MMC0_OUTPUT>, |
| <&ccu CLK_MMC0_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@1c10000 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ccu CLK_AHB_MMC1>, |
| <&ccu CLK_MMC1>, |
| <&ccu CLK_MMC1_OUTPUT>, |
| <&ccu CLK_MMC1_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@1c11000 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ccu CLK_AHB_MMC2>, |
| <&ccu CLK_MMC2>, |
| <&ccu CLK_MMC2_OUTPUT>, |
| <&ccu CLK_MMC2_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc2_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc3: mmc@1c12000 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| reg = <0x01c12000 0x1000>; |
| clocks = <&ccu CLK_AHB_MMC3>, |
| <&ccu CLK_MMC3>, |
| <&ccu CLK_MMC3_OUTPUT>, |
| <&ccu CLK_MMC3_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc3_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| usb_otg: usb@1c13000 { |
| compatible = "allwinner,sun4i-a10-musb"; |
| reg = <0x01c13000 0x0400>; |
| clocks = <&ccu CLK_AHB_OTG>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "mc"; |
| phys = <&usbphy 0>; |
| phy-names = "usb"; |
| extcon = <&usbphy 0>; |
| allwinner,sram = <&otg_sram 1>; |
| dr_mode = "otg"; |
| status = "disabled"; |
| }; |
| |
| usbphy: phy@1c13400 { |
| #phy-cells = <1>; |
| compatible = "allwinner,sun7i-a20-usb-phy"; |
| reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; |
| reg-names = "phy_ctrl", "pmu1", "pmu2"; |
| clocks = <&ccu CLK_USB_PHY>; |
| clock-names = "usb_phy"; |
| resets = <&ccu RST_USB_PHY0>, |
| <&ccu RST_USB_PHY1>, |
| <&ccu RST_USB_PHY2>; |
| reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; |
| status = "disabled"; |
| }; |
| |
| ehci0: usb@1c14000 { |
| compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; |
| reg = <0x01c14000 0x100>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_EHCI0>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@1c14400 { |
| compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; |
| reg = <0x01c14400 0x100>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| crypto: crypto-engine@1c15000 { |
| compatible = "allwinner,sun7i-a20-crypto", |
| "allwinner,sun4i-a10-crypto"; |
| reg = <0x01c15000 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; |
| clock-names = "ahb", "mod"; |
| }; |
| |
| hdmi: hdmi@1c16000 { |
| compatible = "allwinner,sun7i-a20-hdmi", |
| "allwinner,sun5i-a10s-hdmi"; |
| reg = <0x01c16000 0x1000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, |
| <&ccu CLK_PLL_VIDEO0_2X>, |
| <&ccu CLK_PLL_VIDEO1_2X>; |
| clock-names = "ahb", "mod", "pll-0", "pll-1"; |
| dmas = <&dma SUN4I_DMA_NORMAL 16>, |
| <&dma SUN4I_DMA_NORMAL 16>, |
| <&dma SUN4I_DMA_DEDICATED 24>; |
| dma-names = "ddc-tx", "ddc-rx", "audio-tx"; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| hdmi_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| hdmi_in_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_out_hdmi>; |
| }; |
| |
| hdmi_in_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_out_hdmi>; |
| }; |
| }; |
| |
| hdmi_out: port@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| spi2: spi@1c17000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c17000 0x1000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 29>, |
| <&dma SUN4I_DMA_DEDICATED 28>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| num-cs = <1>; |
| }; |
| |
| ahci: sata@1c18000 { |
| compatible = "allwinner,sun4i-a10-ahci"; |
| reg = <0x01c18000 0x1000>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@1c1c000 { |
| compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; |
| reg = <0x01c1c000 0x100>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_EHCI1>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@1c1c400 { |
| compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; |
| reg = <0x01c1c400 0x100>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; |
| phys = <&usbphy 2>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| csi1: csi@1c1d000 { |
| compatible = "allwinner,sun7i-a20-csi1", |
| "allwinner,sun4i-a10-csi1"; |
| reg = <0x01c1d000 0x1000>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; |
| clock-names = "bus", "ram"; |
| resets = <&ccu RST_CSI1>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@1c1f000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c1f000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 31>, |
| <&dma SUN4I_DMA_DEDICATED 30>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| num-cs = <1>; |
| }; |
| |
| ccu: clock@1c20000 { |
| compatible = "allwinner,sun7i-a20-ccu"; |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&osc32k>; |
| clock-names = "hosc", "losc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pio: pinctrl@1c20800 { |
| compatible = "allwinner,sun7i-a20-pinctrl"; |
| reg = <0x01c20800 0x400>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #gpio-cells = <3>; |
| |
| /omit-if-no-ref/ |
| can_pa_pins: can-pa-pins { |
| pins = "PA16", "PA17"; |
| function = "can"; |
| }; |
| |
| /omit-if-no-ref/ |
| can_ph_pins: can-ph-pins { |
| pins = "PH20", "PH21"; |
| function = "can"; |
| }; |
| |
| /omit-if-no-ref/ |
| clk_out_a_pin: clk-out-a-pin { |
| pins = "PI12"; |
| function = "clk_out_a"; |
| }; |
| |
| /omit-if-no-ref/ |
| clk_out_b_pin: clk-out-b-pin { |
| pins = "PI13"; |
| function = "clk_out_b"; |
| }; |
| |
| /omit-if-no-ref/ |
| csi0_8bits_pins: csi-8bits-pins { |
| pins = "PE0", "PE2", "PE3", "PE4", "PE5", |
| "PE6", "PE7", "PE8", "PE9", "PE10", |
| "PE11"; |
| function = "csi0"; |
| }; |
| |
| /omit-if-no-ref/ |
| csi0_clk_pin: csi-clk-pin { |
| pins = "PE1"; |
| function = "csi0"; |
| }; |
| |
| /omit-if-no-ref/ |
| csi1_8bits_pg_pins: csi1-8bits-pg-pins { |
| pins = "PG0", "PG2", "PG3", "PG4", "PG5", |
| "PG6", "PG7", "PG8", "PG9", "PG10", |
| "PG11"; |
| function = "csi1"; |
| }; |
| |
| /omit-if-no-ref/ |
| csi1_24bits_ph_pins: csi1-24bits-ph-pins { |
| pins = "PH0", "PH1", "PH2", "PH3", "PH4", |
| "PH5", "PH6", "PH7", "PH8", "PH9", |
| "PH10", "PH11", "PH12", "PH13", "PH14", |
| "PH15", "PH16", "PH17", "PH18", "PH19", |
| "PH20", "PH21", "PH22", "PH23", "PH24", |
| "PH25", "PH26", "PH27"; |
| function = "csi1"; |
| }; |
| |
| /omit-if-no-ref/ |
| csi1_clk_pg_pin: csi1-clk-pg-pin { |
| pins = "PG1"; |
| function = "csi1"; |
| }; |
| |
| /omit-if-no-ref/ |
| emac_pa_pins: emac-pa-pins { |
| pins = "PA0", "PA1", "PA2", |
| "PA3", "PA4", "PA5", "PA6", |
| "PA7", "PA8", "PA9", "PA10", |
| "PA11", "PA12", "PA13", "PA14", |
| "PA15", "PA16"; |
| function = "emac"; |
| }; |
| |
| /omit-if-no-ref/ |
| emac_ph_pins: emac-ph-pins { |
| pins = "PH8", "PH9", "PH10", "PH11", |
| "PH14", "PH15", "PH16", "PH17", |
| "PH18", "PH19", "PH20", "PH21", |
| "PH22", "PH23", "PH24", "PH25", |
| "PH26"; |
| function = "emac"; |
| }; |
| |
| /omit-if-no-ref/ |
| gmac_mii_pins: gmac-mii-pins { |
| pins = "PA0", "PA1", "PA2", |
| "PA3", "PA4", "PA5", "PA6", |
| "PA7", "PA8", "PA9", "PA10", |
| "PA11", "PA12", "PA13", "PA14", |
| "PA15", "PA16"; |
| function = "gmac"; |
| }; |
| |
| /omit-if-no-ref/ |
| gmac_rgmii_pins: gmac-rgmii-pins { |
| pins = "PA0", "PA1", "PA2", |
| "PA3", "PA4", "PA5", "PA6", |
| "PA7", "PA8", "PA10", |
| "PA11", "PA12", "PA13", |
| "PA15", "PA16"; |
| function = "gmac"; |
| /* |
| * data lines in RGMII mode use DDR mode |
| * and need a higher signal drive strength |
| */ |
| drive-strength = <40>; |
| }; |
| |
| /omit-if-no-ref/ |
| i2c0_pins: i2c0-pins { |
| pins = "PB0", "PB1"; |
| function = "i2c0"; |
| }; |
| |
| /omit-if-no-ref/ |
| i2c1_pins: i2c1-pins { |
| pins = "PB18", "PB19"; |
| function = "i2c1"; |
| }; |
| |
| /omit-if-no-ref/ |
| i2c2_pins: i2c2-pins { |
| pins = "PB20", "PB21"; |
| function = "i2c2"; |
| }; |
| |
| /omit-if-no-ref/ |
| i2c3_pins: i2c3-pins { |
| pins = "PI0", "PI1"; |
| function = "i2c3"; |
| }; |
| |
| /omit-if-no-ref/ |
| ir0_rx_pin: ir0-rx-pin { |
| pins = "PB4"; |
| function = "ir0"; |
| }; |
| |
| /omit-if-no-ref/ |
| ir0_tx_pin: ir0-tx-pin { |
| pins = "PB3"; |
| function = "ir0"; |
| }; |
| |
| /omit-if-no-ref/ |
| ir1_rx_pin: ir1-rx-pin { |
| pins = "PB23"; |
| function = "ir1"; |
| }; |
| |
| /omit-if-no-ref/ |
| ir1_tx_pin: ir1-tx-pin { |
| pins = "PB22"; |
| function = "ir1"; |
| }; |
| |
| /omit-if-no-ref/ |
| lcd_lvds0_pins: lcd-lvds0-pins { |
| pins = "PD0", "PD1", "PD2", "PD3", "PD4", |
| "PD5", "PD6", "PD7", "PD8", "PD9"; |
| function = "lvds0"; |
| }; |
| |
| /omit-if-no-ref/ |
| lcd_lvds1_pins: lcd-lvds1-pins { |
| pins = "PD10", "PD11", "PD12", "PD13", "PD14", |
| "PD15", "PD16", "PD17", "PD18", "PD19"; |
| function = "lvds1"; |
| }; |
| |
| /omit-if-no-ref/ |
| mmc0_pins: mmc0-pins { |
| pins = "PF0", "PF1", "PF2", |
| "PF3", "PF4", "PF5"; |
| function = "mmc0"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| /omit-if-no-ref/ |
| mmc2_pins: mmc2-pins { |
| pins = "PC6", "PC7", "PC8", |
| "PC9", "PC10", "PC11"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| /omit-if-no-ref/ |
| mmc3_pins: mmc3-pins { |
| pins = "PI4", "PI5", "PI6", |
| "PI7", "PI8", "PI9"; |
| function = "mmc3"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| /omit-if-no-ref/ |
| ps2_0_pins: ps2-0-pins { |
| pins = "PI20", "PI21"; |
| function = "ps2"; |
| }; |
| |
| /omit-if-no-ref/ |
| ps2_1_ph_pins: ps2-1-ph-pins { |
| pins = "PH12", "PH13"; |
| function = "ps2"; |
| }; |
| |
| /omit-if-no-ref/ |
| pwm0_pin: pwm0-pin { |
| pins = "PB2"; |
| function = "pwm"; |
| }; |
| |
| /omit-if-no-ref/ |
| pwm1_pin: pwm1-pin { |
| pins = "PI3"; |
| function = "pwm"; |
| }; |
| |
| /omit-if-no-ref/ |
| spdif_tx_pin: spdif-tx-pin { |
| pins = "PB13"; |
| function = "spdif"; |
| bias-pull-up; |
| }; |
| |
| /omit-if-no-ref/ |
| spi0_pi_pins: spi0-pi-pins { |
| pins = "PI11", "PI12", "PI13"; |
| function = "spi0"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi0_cs0_pi_pin: spi0-cs0-pi-pin { |
| pins = "PI10"; |
| function = "spi0"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi0_cs1_pi_pin: spi0-cs1-pi-pin { |
| pins = "PI14"; |
| function = "spi0"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi1_pi_pins: spi1-pi-pins { |
| pins = "PI17", "PI18", "PI19"; |
| function = "spi1"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi1_cs0_pi_pin: spi1-cs0-pi-pin { |
| pins = "PI16"; |
| function = "spi1"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi2_pb_pins: spi2-pb-pins { |
| pins = "PB15", "PB16", "PB17"; |
| function = "spi2"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi2_cs0_pb_pin: spi2-cs0-pb-pin { |
| pins = "PB14"; |
| function = "spi2"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi2_pc_pins: spi2-pc-pins { |
| pins = "PC20", "PC21", "PC22"; |
| function = "spi2"; |
| }; |
| |
| /omit-if-no-ref/ |
| spi2_cs0_pc_pin: spi2-cs0-pc-pin { |
| pins = "PC19"; |
| function = "spi2"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart0_pb_pins: uart0-pb-pins { |
| pins = "PB22", "PB23"; |
| function = "uart0"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart0_pf_pins: uart0-pf-pins { |
| pins = "PF2", "PF4"; |
| function = "uart0"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart1_pa_pins: uart1-pa-pins { |
| pins = "PA10", "PA11"; |
| function = "uart1"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins { |
| pins = "PA12", "PA13"; |
| function = "uart1"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart2_pa_pins: uart2-pa-pins { |
| pins = "PA2", "PA3"; |
| function = "uart2"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins { |
| pins = "PA0", "PA1"; |
| function = "uart2"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart2_pi_pins: uart2-pi-pins { |
| pins = "PI18", "PI19"; |
| function = "uart2"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { |
| pins = "PI16", "PI17"; |
| function = "uart2"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart3_pg_pins: uart3-pg-pins { |
| pins = "PG6", "PG7"; |
| function = "uart3"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { |
| pins = "PG8", "PG9"; |
| function = "uart3"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart3_ph_pins: uart3-ph-pins { |
| pins = "PH0", "PH1"; |
| function = "uart3"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins { |
| pins = "PH2", "PH3"; |
| function = "uart3"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart4_pg_pins: uart4-pg-pins { |
| pins = "PG10", "PG11"; |
| function = "uart4"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart4_ph_pins: uart4-ph-pins { |
| pins = "PH4", "PH5"; |
| function = "uart4"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart5_ph_pins: uart5-ph-pins { |
| pins = "PH6", "PH7"; |
| function = "uart5"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart5_pi_pins: uart5-pi-pins { |
| pins = "PI10", "PI11"; |
| function = "uart5"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart6_pa_pins: uart6-pa-pins { |
| pins = "PA12", "PA13"; |
| function = "uart6"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart6_pi_pins: uart6-pi-pins { |
| pins = "PI12", "PI13"; |
| function = "uart6"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart7_pa_pins: uart7-pa-pins { |
| pins = "PA14", "PA15"; |
| function = "uart7"; |
| }; |
| |
| /omit-if-no-ref/ |
| uart7_pi_pins: uart7-pi-pins { |
| pins = "PI20", "PI21"; |
| function = "uart7"; |
| }; |
| }; |
| |
| timer@1c20c00 { |
| compatible = "allwinner,sun4i-a10-timer"; |
| reg = <0x01c20c00 0x90>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| wdt: watchdog@1c20c90 { |
| compatible = "allwinner,sun4i-a10-wdt"; |
| reg = <0x01c20c90 0x10>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| |
| rtc: rtc@1c20d00 { |
| compatible = "allwinner,sun7i-a20-rtc"; |
| reg = <0x01c20d00 0x20>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pwm: pwm@1c20e00 { |
| compatible = "allwinner,sun7i-a20-pwm"; |
| reg = <0x01c20e00 0xc>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| spdif: spdif@1c21000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-spdif"; |
| reg = <0x01c21000 0x400>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; |
| clock-names = "apb", "spdif"; |
| dmas = <&dma SUN4I_DMA_NORMAL 2>, |
| <&dma SUN4I_DMA_NORMAL 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| ir0: ir@1c21800 { |
| compatible = "allwinner,sun4i-a10-ir"; |
| clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; |
| clock-names = "apb", "ir"; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x01c21800 0x40>; |
| status = "disabled"; |
| }; |
| |
| ir1: ir@1c21c00 { |
| compatible = "allwinner,sun4i-a10-ir"; |
| clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; |
| clock-names = "apb", "ir"; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x01c21c00 0x40>; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@1c22000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-i2s"; |
| reg = <0x01c22000 0x400>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma SUN4I_DMA_NORMAL 4>, |
| <&dma SUN4I_DMA_NORMAL 4>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@1c22400 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-i2s"; |
| reg = <0x01c22400 0x400>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma SUN4I_DMA_NORMAL 3>, |
| <&dma SUN4I_DMA_NORMAL 3>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lradc: lradc@1c22800 { |
| compatible = "allwinner,sun4i-a10-lradc-keys"; |
| reg = <0x01c22800 0x100>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| codec: codec@1c22c00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun7i-a20-codec"; |
| reg = <0x01c22c00 0x40>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; |
| clock-names = "apb", "codec"; |
| dmas = <&dma SUN4I_DMA_NORMAL 19>, |
| <&dma SUN4I_DMA_NORMAL 19>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| sid: eeprom@1c23800 { |
| compatible = "allwinner,sun7i-a20-sid"; |
| reg = <0x01c23800 0x200>; |
| }; |
| |
| i2s2: i2s@1c24400 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-i2s"; |
| reg = <0x01c24400 0x400>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma SUN4I_DMA_NORMAL 6>, |
| <&dma SUN4I_DMA_NORMAL 6>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| rtp: rtp@1c25000 { |
| compatible = "allwinner,sun5i-a13-ts"; |
| reg = <0x01c25000 0x100>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| uart0: serial@1c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@1c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@1c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@1c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART3>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@1c29000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29000 0x400>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART4>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@1c29400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29400 0x400>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART5>; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@1c29800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29800 0x400>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART6>; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@1c29c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29c00 0x400>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_APB1_UART7>; |
| status = "disabled"; |
| }; |
| |
| ps20: ps2@1c2a000 { |
| compatible = "allwinner,sun4i-a10-ps2"; |
| reg = <0x01c2a000 0x400>; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_PS20>; |
| status = "disabled"; |
| }; |
| |
| ps21: ps2@1c2a400 { |
| compatible = "allwinner,sun4i-a10-ps2"; |
| reg = <0x01c2a400 0x400>; |
| interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_PS21>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@1c2ac00 { |
| compatible = "allwinner,sun7i-a20-i2c", |
| "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@1c2b000 { |
| compatible = "allwinner,sun7i-a20-i2c", |
| "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@1c2b400 { |
| compatible = "allwinner,sun7i-a20-i2c", |
| "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c3: i2c@1c2b800 { |
| compatible = "allwinner,sun7i-a20-i2c", |
| "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2b800 0x400>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_I2C3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| can0: can@1c2bc00 { |
| compatible = "allwinner,sun7i-a20-can", |
| "allwinner,sun4i-a10-can"; |
| reg = <0x01c2bc00 0x400>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_CAN>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@1c2c000 { |
| compatible = "allwinner,sun7i-a20-i2c", |
| "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2c000 0x400>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_APB1_I2C4>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mali: gpu@1c40000 { |
| compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; |
| reg = <0x01c40000 0x10000>; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gp", |
| "gpmmu", |
| "pp0", |
| "ppmmu0", |
| "pp1", |
| "ppmmu1", |
| "pmu"; |
| clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; |
| clock-names = "bus", "core"; |
| resets = <&ccu RST_GPU>; |
| |
| assigned-clocks = <&ccu CLK_GPU>; |
| assigned-clock-rates = <384000000>; |
| }; |
| |
| gmac: ethernet@1c50000 { |
| compatible = "allwinner,sun7i-a20-gmac"; |
| reg = <0x01c50000 0x10000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>; |
| clock-names = "stmmaceth", "allwinner_gmac_tx"; |
| snps,pbl = <2>; |
| snps,fixed-burst; |
| snps,force_sf_dma_mode; |
| status = "disabled"; |
| |
| gmac_mdio: mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| hstimer@1c60000 { |
| compatible = "allwinner,sun7i-a20-hstimer"; |
| reg = <0x01c60000 0x1000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_HSTIMER>; |
| }; |
| |
| gic: interrupt-controller@1c81000 { |
| compatible = "arm,gic-400"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x2000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| fe0: display-frontend@1e00000 { |
| compatible = "allwinner,sun7i-a20-display-frontend"; |
| reg = <0x01e00000 0x20000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, |
| <&ccu CLK_DRAM_DE_FE0>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&ccu RST_DE_FE0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fe0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| fe0_out_be0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&be0_in_fe0>; |
| }; |
| |
| fe0_out_be1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&be1_in_fe0>; |
| }; |
| }; |
| }; |
| }; |
| |
| fe1: display-frontend@1e20000 { |
| compatible = "allwinner,sun7i-a20-display-frontend"; |
| reg = <0x01e20000 0x20000>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, |
| <&ccu CLK_DRAM_DE_FE1>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&ccu RST_DE_FE1>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fe1_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| fe1_out_be0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&be0_in_fe1>; |
| }; |
| |
| fe1_out_be1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&be1_in_fe1>; |
| }; |
| }; |
| }; |
| }; |
| |
| be1: display-backend@1e40000 { |
| compatible = "allwinner,sun7i-a20-display-backend"; |
| reg = <0x01e40000 0x10000>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, |
| <&ccu CLK_DRAM_DE_BE1>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&ccu RST_DE_BE1>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| be1_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| be1_in_fe0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&fe0_out_be1>; |
| }; |
| |
| be1_in_fe1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&fe1_out_be1>; |
| }; |
| }; |
| |
| be1_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| be1_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_be1>; |
| }; |
| |
| be1_out_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_in_be1>; |
| }; |
| }; |
| }; |
| }; |
| |
| be0: display-backend@1e60000 { |
| compatible = "allwinner,sun7i-a20-display-backend"; |
| reg = <0x01e60000 0x10000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, |
| <&ccu CLK_DRAM_DE_BE0>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&ccu RST_DE_BE0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| be0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| be0_in_fe0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&fe0_out_be0>; |
| }; |
| |
| be0_in_fe1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&fe1_out_be0>; |
| }; |
| }; |
| |
| be0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| be0_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_be0>; |
| }; |
| |
| be0_out_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_in_be0>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |