| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Copyright (c) 2018 MediaTek Inc. |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/mailbox_controller.h> |
| #include <linux/mailbox/mtk-cmdq-mailbox.h> |
| #include <linux/of_device.h> |
| |
| #define CMDQ_OP_CODE_MASK (0xff << CMDQ_OP_CODE_SHIFT) |
| #define CMDQ_NUM_CMD(t) (t->cmd_buf_size / CMDQ_INST_SIZE) |
| |
| #define CMDQ_CURR_IRQ_STATUS 0x10 |
| #define CMDQ_SYNC_TOKEN_UPDATE 0x68 |
| #define CMDQ_THR_SLOT_CYCLES 0x30 |
| #define CMDQ_THR_BASE 0x100 |
| #define CMDQ_THR_SIZE 0x80 |
| #define CMDQ_THR_WARM_RESET 0x00 |
| #define CMDQ_THR_ENABLE_TASK 0x04 |
| #define CMDQ_THR_SUSPEND_TASK 0x08 |
| #define CMDQ_THR_CURR_STATUS 0x0c |
| #define CMDQ_THR_IRQ_STATUS 0x10 |
| #define CMDQ_THR_IRQ_ENABLE 0x14 |
| #define CMDQ_THR_CURR_ADDR 0x20 |
| #define CMDQ_THR_END_ADDR 0x24 |
| #define CMDQ_THR_WAIT_TOKEN 0x30 |
| #define CMDQ_THR_PRIORITY 0x40 |
| |
| #define CMDQ_THR_ACTIVE_SLOT_CYCLES 0x3200 |
| #define CMDQ_THR_ENABLED 0x1 |
| #define CMDQ_THR_DISABLED 0x0 |
| #define CMDQ_THR_SUSPEND 0x1 |
| #define CMDQ_THR_RESUME 0x0 |
| #define CMDQ_THR_STATUS_SUSPENDED BIT(1) |
| #define CMDQ_THR_DO_WARM_RESET BIT(0) |
| #define CMDQ_THR_IRQ_DONE 0x1 |
| #define CMDQ_THR_IRQ_ERROR 0x12 |
| #define CMDQ_THR_IRQ_EN (CMDQ_THR_IRQ_ERROR | CMDQ_THR_IRQ_DONE) |
| #define CMDQ_THR_IS_WAITING BIT(31) |
| |
| #define CMDQ_JUMP_BY_OFFSET 0x10000000 |
| #define CMDQ_JUMP_BY_PA 0x10000001 |
| |
| struct cmdq_thread { |
| struct mbox_chan *chan; |
| void __iomem *base; |
| struct list_head task_busy_list; |
| u32 priority; |
| }; |
| |
| struct cmdq_task { |
| struct cmdq *cmdq; |
| struct list_head list_entry; |
| dma_addr_t pa_base; |
| struct cmdq_thread *thread; |
| struct cmdq_pkt *pkt; /* the packet sent from mailbox client */ |
| }; |
| |
| struct cmdq { |
| struct mbox_controller mbox; |
| void __iomem *base; |
| int irq; |
| u32 thread_nr; |
| u32 irq_mask; |
| struct cmdq_thread *thread; |
| struct clk *clock; |
| bool suspended; |
| u8 shift_pa; |
| }; |
| |
| struct gce_plat { |
| u32 thread_nr; |
| u8 shift; |
| }; |
| |
| u8 cmdq_get_shift_pa(struct mbox_chan *chan) |
| { |
| struct cmdq *cmdq = container_of(chan->mbox, struct cmdq, mbox); |
| |
| return cmdq->shift_pa; |
| } |
| EXPORT_SYMBOL(cmdq_get_shift_pa); |
| |
| static int cmdq_thread_suspend(struct cmdq *cmdq, struct cmdq_thread *thread) |
| { |
| u32 status; |
| |
| writel(CMDQ_THR_SUSPEND, thread->base + CMDQ_THR_SUSPEND_TASK); |
| |
| /* If already disabled, treat as suspended successful. */ |
| if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED)) |
| return 0; |
| |
| if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_STATUS, |
| status, status & CMDQ_THR_STATUS_SUSPENDED, 0, 10)) { |
| dev_err(cmdq->mbox.dev, "suspend GCE thread 0x%x failed\n", |
| (u32)(thread->base - cmdq->base)); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static void cmdq_thread_resume(struct cmdq_thread *thread) |
| { |
| writel(CMDQ_THR_RESUME, thread->base + CMDQ_THR_SUSPEND_TASK); |
| } |
| |
| static void cmdq_init(struct cmdq *cmdq) |
| { |
| int i; |
| |
| WARN_ON(clk_enable(cmdq->clock) < 0); |
| writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES); |
| for (i = 0; i <= CMDQ_MAX_EVENT; i++) |
| writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE); |
| clk_disable(cmdq->clock); |
| } |
| |
| static int cmdq_thread_reset(struct cmdq *cmdq, struct cmdq_thread *thread) |
| { |
| u32 warm_reset; |
| |
| writel(CMDQ_THR_DO_WARM_RESET, thread->base + CMDQ_THR_WARM_RESET); |
| if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_WARM_RESET, |
| warm_reset, !(warm_reset & CMDQ_THR_DO_WARM_RESET), |
| 0, 10)) { |
| dev_err(cmdq->mbox.dev, "reset GCE thread 0x%x failed\n", |
| (u32)(thread->base - cmdq->base)); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static void cmdq_thread_disable(struct cmdq *cmdq, struct cmdq_thread *thread) |
| { |
| cmdq_thread_reset(cmdq, thread); |
| writel(CMDQ_THR_DISABLED, thread->base + CMDQ_THR_ENABLE_TASK); |
| } |
| |
| /* notify GCE to re-fetch commands by setting GCE thread PC */ |
| static void cmdq_thread_invalidate_fetched_data(struct cmdq_thread *thread) |
| { |
| writel(readl(thread->base + CMDQ_THR_CURR_ADDR), |
| thread->base + CMDQ_THR_CURR_ADDR); |
| } |
| |
| static void cmdq_task_insert_into_thread(struct cmdq_task *task) |
| { |
| struct device *dev = task->cmdq->mbox.dev; |
| struct cmdq_thread *thread = task->thread; |
| struct cmdq_task *prev_task = list_last_entry( |
| &thread->task_busy_list, typeof(*task), list_entry); |
| u64 *prev_task_base = prev_task->pkt->va_base; |
| |
| /* let previous task jump to this task */ |
| dma_sync_single_for_cpu(dev, prev_task->pa_base, |
| prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE); |
| prev_task_base[CMDQ_NUM_CMD(prev_task->pkt) - 1] = |
| (u64)CMDQ_JUMP_BY_PA << 32 | task->pa_base; |
| dma_sync_single_for_device(dev, prev_task->pa_base, |
| prev_task->pkt->cmd_buf_size, DMA_TO_DEVICE); |
| |
| cmdq_thread_invalidate_fetched_data(thread); |
| } |
| |
| static bool cmdq_thread_is_in_wfe(struct cmdq_thread *thread) |
| { |
| return readl(thread->base + CMDQ_THR_WAIT_TOKEN) & CMDQ_THR_IS_WAITING; |
| } |
| |
| static void cmdq_task_exec_done(struct cmdq_task *task, enum cmdq_cb_status sta) |
| { |
| struct cmdq_task_cb *cb = &task->pkt->async_cb; |
| struct cmdq_cb_data data; |
| |
| WARN_ON(cb->cb == (cmdq_async_flush_cb)NULL); |
| data.sta = sta; |
| data.data = cb->data; |
| cb->cb(data); |
| |
| list_del(&task->list_entry); |
| } |
| |
| static void cmdq_task_handle_error(struct cmdq_task *task) |
| { |
| struct cmdq_thread *thread = task->thread; |
| struct cmdq_task *next_task; |
| struct cmdq *cmdq = task->cmdq; |
| |
| dev_err(cmdq->mbox.dev, "task 0x%p error\n", task); |
| WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); |
| next_task = list_first_entry_or_null(&thread->task_busy_list, |
| struct cmdq_task, list_entry); |
| if (next_task) |
| writel(next_task->pa_base >> cmdq->shift_pa, |
| thread->base + CMDQ_THR_CURR_ADDR); |
| cmdq_thread_resume(thread); |
| } |
| |
| static void cmdq_thread_irq_handler(struct cmdq *cmdq, |
| struct cmdq_thread *thread) |
| { |
| struct cmdq_task *task, *tmp, *curr_task = NULL; |
| u32 curr_pa, irq_flag, task_end_pa; |
| bool err; |
| |
| irq_flag = readl(thread->base + CMDQ_THR_IRQ_STATUS); |
| writel(~irq_flag, thread->base + CMDQ_THR_IRQ_STATUS); |
| |
| /* |
| * When ISR call this function, another CPU core could run |
| * "release task" right before we acquire the spin lock, and thus |
| * reset / disable this GCE thread, so we need to check the enable |
| * bit of this GCE thread. |
| */ |
| if (!(readl(thread->base + CMDQ_THR_ENABLE_TASK) & CMDQ_THR_ENABLED)) |
| return; |
| |
| if (irq_flag & CMDQ_THR_IRQ_ERROR) |
| err = true; |
| else if (irq_flag & CMDQ_THR_IRQ_DONE) |
| err = false; |
| else |
| return; |
| |
| curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << cmdq->shift_pa; |
| |
| list_for_each_entry_safe(task, tmp, &thread->task_busy_list, |
| list_entry) { |
| task_end_pa = task->pa_base + task->pkt->cmd_buf_size; |
| if (curr_pa >= task->pa_base && curr_pa < task_end_pa) |
| curr_task = task; |
| |
| if (!curr_task || curr_pa == task_end_pa - CMDQ_INST_SIZE) { |
| cmdq_task_exec_done(task, CMDQ_CB_NORMAL); |
| kfree(task); |
| } else if (err) { |
| cmdq_task_exec_done(task, CMDQ_CB_ERROR); |
| cmdq_task_handle_error(curr_task); |
| kfree(task); |
| } |
| |
| if (curr_task) |
| break; |
| } |
| |
| if (list_empty(&thread->task_busy_list)) { |
| cmdq_thread_disable(cmdq, thread); |
| clk_disable(cmdq->clock); |
| } |
| } |
| |
| static irqreturn_t cmdq_irq_handler(int irq, void *dev) |
| { |
| struct cmdq *cmdq = dev; |
| unsigned long irq_status, flags = 0L; |
| int bit; |
| |
| irq_status = readl(cmdq->base + CMDQ_CURR_IRQ_STATUS) & cmdq->irq_mask; |
| if (!(irq_status ^ cmdq->irq_mask)) |
| return IRQ_NONE; |
| |
| for_each_clear_bit(bit, &irq_status, cmdq->thread_nr) { |
| struct cmdq_thread *thread = &cmdq->thread[bit]; |
| |
| spin_lock_irqsave(&thread->chan->lock, flags); |
| cmdq_thread_irq_handler(cmdq, thread); |
| spin_unlock_irqrestore(&thread->chan->lock, flags); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int cmdq_suspend(struct device *dev) |
| { |
| struct cmdq *cmdq = dev_get_drvdata(dev); |
| struct cmdq_thread *thread; |
| int i; |
| bool task_running = false; |
| |
| cmdq->suspended = true; |
| |
| for (i = 0; i < cmdq->thread_nr; i++) { |
| thread = &cmdq->thread[i]; |
| if (!list_empty(&thread->task_busy_list)) { |
| task_running = true; |
| break; |
| } |
| } |
| |
| if (task_running) |
| dev_warn(dev, "exist running task(s) in suspend\n"); |
| |
| clk_unprepare(cmdq->clock); |
| |
| return 0; |
| } |
| |
| static int cmdq_resume(struct device *dev) |
| { |
| struct cmdq *cmdq = dev_get_drvdata(dev); |
| |
| WARN_ON(clk_prepare(cmdq->clock) < 0); |
| cmdq->suspended = false; |
| return 0; |
| } |
| |
| static int cmdq_remove(struct platform_device *pdev) |
| { |
| struct cmdq *cmdq = platform_get_drvdata(pdev); |
| |
| clk_unprepare(cmdq->clock); |
| |
| return 0; |
| } |
| |
| static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data) |
| { |
| struct cmdq_pkt *pkt = (struct cmdq_pkt *)data; |
| struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv; |
| struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev); |
| struct cmdq_task *task; |
| unsigned long curr_pa, end_pa; |
| |
| /* Client should not flush new tasks if suspended. */ |
| WARN_ON(cmdq->suspended); |
| |
| task = kzalloc(sizeof(*task), GFP_ATOMIC); |
| if (!task) |
| return -ENOMEM; |
| |
| task->cmdq = cmdq; |
| INIT_LIST_HEAD(&task->list_entry); |
| task->pa_base = pkt->pa_base; |
| task->thread = thread; |
| task->pkt = pkt; |
| |
| if (list_empty(&thread->task_busy_list)) { |
| WARN_ON(clk_enable(cmdq->clock) < 0); |
| /* |
| * The thread reset will clear thread related register to 0, |
| * including pc, end, priority, irq, suspend and enable. Thus |
| * set CMDQ_THR_ENABLED to CMDQ_THR_ENABLE_TASK will enable |
| * thread and make it running. |
| */ |
| WARN_ON(cmdq_thread_reset(cmdq, thread) < 0); |
| |
| writel(task->pa_base >> cmdq->shift_pa, |
| thread->base + CMDQ_THR_CURR_ADDR); |
| writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, |
| thread->base + CMDQ_THR_END_ADDR); |
| |
| writel(thread->priority, thread->base + CMDQ_THR_PRIORITY); |
| writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE); |
| writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK); |
| } else { |
| WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); |
| curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR) << |
| cmdq->shift_pa; |
| end_pa = readl(thread->base + CMDQ_THR_END_ADDR) << |
| cmdq->shift_pa; |
| /* check boundary */ |
| if (curr_pa == end_pa - CMDQ_INST_SIZE || |
| curr_pa == end_pa) { |
| /* set to this task directly */ |
| writel(task->pa_base >> cmdq->shift_pa, |
| thread->base + CMDQ_THR_CURR_ADDR); |
| } else { |
| cmdq_task_insert_into_thread(task); |
| smp_mb(); /* modify jump before enable thread */ |
| } |
| writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa, |
| thread->base + CMDQ_THR_END_ADDR); |
| cmdq_thread_resume(thread); |
| } |
| list_move_tail(&task->list_entry, &thread->task_busy_list); |
| |
| return 0; |
| } |
| |
| static int cmdq_mbox_startup(struct mbox_chan *chan) |
| { |
| return 0; |
| } |
| |
| static void cmdq_mbox_shutdown(struct mbox_chan *chan) |
| { |
| struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv; |
| struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev); |
| struct cmdq_task *task, *tmp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&thread->chan->lock, flags); |
| if (list_empty(&thread->task_busy_list)) |
| goto done; |
| |
| WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); |
| |
| /* make sure executed tasks have success callback */ |
| cmdq_thread_irq_handler(cmdq, thread); |
| if (list_empty(&thread->task_busy_list)) |
| goto done; |
| |
| list_for_each_entry_safe(task, tmp, &thread->task_busy_list, |
| list_entry) { |
| cmdq_task_exec_done(task, CMDQ_CB_ERROR); |
| kfree(task); |
| } |
| |
| cmdq_thread_disable(cmdq, thread); |
| clk_disable(cmdq->clock); |
| done: |
| /* |
| * The thread->task_busy_list empty means thread already disable. The |
| * cmdq_mbox_send_data() always reset thread which clear disable and |
| * suspend statue when first pkt send to channel, so there is no need |
| * to do any operation here, only unlock and leave. |
| */ |
| spin_unlock_irqrestore(&thread->chan->lock, flags); |
| } |
| |
| static int cmdq_mbox_flush(struct mbox_chan *chan, unsigned long timeout) |
| { |
| struct cmdq_thread *thread = (struct cmdq_thread *)chan->con_priv; |
| struct cmdq_task_cb *cb; |
| struct cmdq_cb_data data; |
| struct cmdq *cmdq = dev_get_drvdata(chan->mbox->dev); |
| struct cmdq_task *task, *tmp; |
| unsigned long flags; |
| u32 enable; |
| |
| spin_lock_irqsave(&thread->chan->lock, flags); |
| if (list_empty(&thread->task_busy_list)) |
| goto out; |
| |
| WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0); |
| if (!cmdq_thread_is_in_wfe(thread)) |
| goto wait; |
| |
| list_for_each_entry_safe(task, tmp, &thread->task_busy_list, |
| list_entry) { |
| cb = &task->pkt->async_cb; |
| if (cb->cb) { |
| data.sta = CMDQ_CB_ERROR; |
| data.data = cb->data; |
| cb->cb(data); |
| } |
| list_del(&task->list_entry); |
| kfree(task); |
| } |
| |
| cmdq_thread_resume(thread); |
| cmdq_thread_disable(cmdq, thread); |
| clk_disable(cmdq->clock); |
| |
| out: |
| spin_unlock_irqrestore(&thread->chan->lock, flags); |
| return 0; |
| |
| wait: |
| cmdq_thread_resume(thread); |
| spin_unlock_irqrestore(&thread->chan->lock, flags); |
| if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_ENABLE_TASK, |
| enable, enable == 0, 1, timeout)) { |
| dev_err(cmdq->mbox.dev, "Fail to wait GCE thread 0x%x done\n", |
| (u32)(thread->base - cmdq->base)); |
| |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| static const struct mbox_chan_ops cmdq_mbox_chan_ops = { |
| .send_data = cmdq_mbox_send_data, |
| .startup = cmdq_mbox_startup, |
| .shutdown = cmdq_mbox_shutdown, |
| .flush = cmdq_mbox_flush, |
| }; |
| |
| static struct mbox_chan *cmdq_xlate(struct mbox_controller *mbox, |
| const struct of_phandle_args *sp) |
| { |
| int ind = sp->args[0]; |
| struct cmdq_thread *thread; |
| |
| if (ind >= mbox->num_chans) |
| return ERR_PTR(-EINVAL); |
| |
| thread = (struct cmdq_thread *)mbox->chans[ind].con_priv; |
| thread->priority = sp->args[1]; |
| thread->chan = &mbox->chans[ind]; |
| |
| return &mbox->chans[ind]; |
| } |
| |
| static int cmdq_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct cmdq *cmdq; |
| int err, i; |
| struct gce_plat *plat_data; |
| |
| cmdq = devm_kzalloc(dev, sizeof(*cmdq), GFP_KERNEL); |
| if (!cmdq) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| cmdq->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(cmdq->base)) { |
| dev_err(dev, "failed to ioremap gce\n"); |
| return PTR_ERR(cmdq->base); |
| } |
| |
| cmdq->irq = platform_get_irq(pdev, 0); |
| if (cmdq->irq < 0) |
| return cmdq->irq; |
| |
| plat_data = (struct gce_plat *)of_device_get_match_data(dev); |
| if (!plat_data) { |
| dev_err(dev, "failed to get match data\n"); |
| return -EINVAL; |
| } |
| |
| cmdq->thread_nr = plat_data->thread_nr; |
| cmdq->shift_pa = plat_data->shift; |
| cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0); |
| err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED, |
| "mtk_cmdq", cmdq); |
| if (err < 0) { |
| dev_err(dev, "failed to register ISR (%d)\n", err); |
| return err; |
| } |
| |
| dev_dbg(dev, "cmdq device: addr:0x%p, va:0x%p, irq:%d\n", |
| dev, cmdq->base, cmdq->irq); |
| |
| cmdq->clock = devm_clk_get(dev, "gce"); |
| if (IS_ERR(cmdq->clock)) { |
| dev_err(dev, "failed to get gce clk\n"); |
| return PTR_ERR(cmdq->clock); |
| } |
| |
| cmdq->mbox.dev = dev; |
| cmdq->mbox.chans = devm_kcalloc(dev, cmdq->thread_nr, |
| sizeof(*cmdq->mbox.chans), GFP_KERNEL); |
| if (!cmdq->mbox.chans) |
| return -ENOMEM; |
| |
| cmdq->mbox.num_chans = cmdq->thread_nr; |
| cmdq->mbox.ops = &cmdq_mbox_chan_ops; |
| cmdq->mbox.of_xlate = cmdq_xlate; |
| |
| /* make use of TXDONE_BY_ACK */ |
| cmdq->mbox.txdone_irq = false; |
| cmdq->mbox.txdone_poll = false; |
| |
| cmdq->thread = devm_kcalloc(dev, cmdq->thread_nr, |
| sizeof(*cmdq->thread), GFP_KERNEL); |
| if (!cmdq->thread) |
| return -ENOMEM; |
| |
| for (i = 0; i < cmdq->thread_nr; i++) { |
| cmdq->thread[i].base = cmdq->base + CMDQ_THR_BASE + |
| CMDQ_THR_SIZE * i; |
| INIT_LIST_HEAD(&cmdq->thread[i].task_busy_list); |
| cmdq->mbox.chans[i].con_priv = (void *)&cmdq->thread[i]; |
| } |
| |
| err = devm_mbox_controller_register(dev, &cmdq->mbox); |
| if (err < 0) { |
| dev_err(dev, "failed to register mailbox: %d\n", err); |
| return err; |
| } |
| |
| platform_set_drvdata(pdev, cmdq); |
| WARN_ON(clk_prepare(cmdq->clock) < 0); |
| |
| cmdq_init(cmdq); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops cmdq_pm_ops = { |
| .suspend = cmdq_suspend, |
| .resume = cmdq_resume, |
| }; |
| |
| static const struct gce_plat gce_plat_v2 = {.thread_nr = 16}; |
| static const struct gce_plat gce_plat_v3 = {.thread_nr = 24}; |
| static const struct gce_plat gce_plat_v4 = {.thread_nr = 24, .shift = 3}; |
| |
| static const struct of_device_id cmdq_of_ids[] = { |
| {.compatible = "mediatek,mt8173-gce", .data = (void *)&gce_plat_v2}, |
| {.compatible = "mediatek,mt8183-gce", .data = (void *)&gce_plat_v3}, |
| {.compatible = "mediatek,mt6779-gce", .data = (void *)&gce_plat_v4}, |
| {} |
| }; |
| |
| static struct platform_driver cmdq_drv = { |
| .probe = cmdq_probe, |
| .remove = cmdq_remove, |
| .driver = { |
| .name = "mtk_cmdq", |
| .pm = &cmdq_pm_ops, |
| .of_match_table = cmdq_of_ids, |
| } |
| }; |
| |
| static int __init cmdq_drv_init(void) |
| { |
| return platform_driver_register(&cmdq_drv); |
| } |
| |
| static void __exit cmdq_drv_exit(void) |
| { |
| platform_driver_unregister(&cmdq_drv); |
| } |
| |
| subsys_initcall(cmdq_drv_init); |
| module_exit(cmdq_drv_exit); |
| |
| MODULE_LICENSE("GPL v2"); |