| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * LPC variant I/O for Microchip EC |
| * |
| * Copyright (C) 2016 Google, Inc |
| */ |
| |
| #ifndef __CROS_EC_LPC_MEC_H |
| #define __CROS_EC_LPC_MEC_H |
| |
| enum cros_ec_lpc_mec_emi_access_mode { |
| /* 8-bit access */ |
| ACCESS_TYPE_BYTE = 0x0, |
| /* 16-bit access */ |
| ACCESS_TYPE_WORD = 0x1, |
| /* 32-bit access */ |
| ACCESS_TYPE_LONG = 0x2, |
| /* |
| * 32-bit access, read or write of MEC_EMI_EC_DATA_B3 causes the |
| * EC data register to be incremented. |
| */ |
| ACCESS_TYPE_LONG_AUTO_INCREMENT = 0x3, |
| }; |
| |
| enum cros_ec_lpc_mec_io_type { |
| MEC_IO_READ, |
| MEC_IO_WRITE, |
| }; |
| |
| /* EMI registers are relative to base */ |
| #define MEC_EMI_HOST_TO_EC(MEC_EMI_BASE) ((MEC_EMI_BASE) + 0) |
| #define MEC_EMI_EC_TO_HOST(MEC_EMI_BASE) ((MEC_EMI_BASE) + 1) |
| #define MEC_EMI_EC_ADDRESS_B0(MEC_EMI_BASE) ((MEC_EMI_BASE) + 2) |
| #define MEC_EMI_EC_ADDRESS_B1(MEC_EMI_BASE) ((MEC_EMI_BASE) + 3) |
| #define MEC_EMI_EC_DATA_B0(MEC_EMI_BASE) ((MEC_EMI_BASE) + 4) |
| #define MEC_EMI_EC_DATA_B1(MEC_EMI_BASE) ((MEC_EMI_BASE) + 5) |
| #define MEC_EMI_EC_DATA_B2(MEC_EMI_BASE) ((MEC_EMI_BASE) + 6) |
| #define MEC_EMI_EC_DATA_B3(MEC_EMI_BASE) ((MEC_EMI_BASE) + 7) |
| |
| /** |
| * cros_ec_lpc_mec_init() - Initialize MEC I/O. |
| * |
| * @base: MEC EMI Base address |
| * @end: MEC EMI End address |
| */ |
| void cros_ec_lpc_mec_init(unsigned int base, unsigned int end); |
| |
| /* |
| * cros_ec_lpc_mec_destroy |
| * |
| * Cleanup MEC I/O. |
| */ |
| void cros_ec_lpc_mec_destroy(void); |
| |
| /** |
| * cros_ec_lpc_mec_in_range() - Determine if addresses are in MEC EMI range. |
| * |
| * @offset: Address offset |
| * @length: Number of bytes to check |
| * |
| * Return: 1 if in range, 0 if not, and -EINVAL on failure |
| * such as the mec range not being initialized |
| */ |
| int cros_ec_lpc_mec_in_range(unsigned int offset, unsigned int length); |
| |
| /** |
| * cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port |
| * |
| * @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request |
| * @offset: Base read / write address |
| * @length: Number of bytes to read / write |
| * @buf: Destination / source buffer |
| * |
| * @return 8-bit checksum of all bytes read / written |
| */ |
| u8 cros_ec_lpc_io_bytes_mec(enum cros_ec_lpc_mec_io_type io_type, |
| unsigned int offset, unsigned int length, u8 *buf); |
| |
| #endif /* __CROS_EC_LPC_MEC_H */ |