| /* |
| * |
| * Bluetooth HCI UART driver for marvell devices |
| * |
| * Copyright (C) 2016 Marvell International Ltd. |
| * Copyright (C) 2016 Intel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/skbuff.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <linux/tty.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "hci_uart.h" |
| |
| #define HCI_FW_REQ_PKT 0xA5 |
| #define HCI_CHIP_VER_PKT 0xAA |
| |
| #define MRVL_ACK 0x5A |
| #define MRVL_NAK 0xBF |
| #define MRVL_RAW_DATA 0x1F |
| |
| enum { |
| STATE_CHIP_VER_PENDING, |
| STATE_FW_REQ_PENDING, |
| }; |
| |
| struct mrvl_data { |
| struct sk_buff *rx_skb; |
| struct sk_buff_head txq; |
| struct sk_buff_head rawq; |
| unsigned long flags; |
| unsigned int tx_len; |
| u8 id, rev; |
| }; |
| |
| struct hci_mrvl_pkt { |
| __le16 lhs; |
| __le16 rhs; |
| } __packed; |
| #define HCI_MRVL_PKT_SIZE 4 |
| |
| static int mrvl_open(struct hci_uart *hu) |
| { |
| struct mrvl_data *mrvl; |
| |
| BT_DBG("hu %p", hu); |
| |
| mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL); |
| if (!mrvl) |
| return -ENOMEM; |
| |
| skb_queue_head_init(&mrvl->txq); |
| skb_queue_head_init(&mrvl->rawq); |
| |
| set_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); |
| |
| hu->priv = mrvl; |
| return 0; |
| } |
| |
| static int mrvl_close(struct hci_uart *hu) |
| { |
| struct mrvl_data *mrvl = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| skb_queue_purge(&mrvl->txq); |
| skb_queue_purge(&mrvl->rawq); |
| kfree_skb(mrvl->rx_skb); |
| kfree(mrvl); |
| |
| hu->priv = NULL; |
| return 0; |
| } |
| |
| static int mrvl_flush(struct hci_uart *hu) |
| { |
| struct mrvl_data *mrvl = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| skb_queue_purge(&mrvl->txq); |
| skb_queue_purge(&mrvl->rawq); |
| |
| return 0; |
| } |
| |
| static struct sk_buff *mrvl_dequeue(struct hci_uart *hu) |
| { |
| struct mrvl_data *mrvl = hu->priv; |
| struct sk_buff *skb; |
| |
| skb = skb_dequeue(&mrvl->txq); |
| if (!skb) { |
| /* Any raw data ? */ |
| skb = skb_dequeue(&mrvl->rawq); |
| } else { |
| /* Prepend skb with frame type */ |
| memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); |
| } |
| |
| return skb; |
| } |
| |
| static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb) |
| { |
| struct mrvl_data *mrvl = hu->priv; |
| |
| skb_queue_tail(&mrvl->txq, skb); |
| return 0; |
| } |
| |
| static void mrvl_send_ack(struct hci_uart *hu, unsigned char type) |
| { |
| struct mrvl_data *mrvl = hu->priv; |
| struct sk_buff *skb; |
| |
| /* No H4 payload, only 1 byte header */ |
| skb = bt_skb_alloc(0, GFP_ATOMIC); |
| if (!skb) { |
| bt_dev_err(hu->hdev, "Unable to alloc ack/nak packet"); |
| return; |
| } |
| hci_skb_pkt_type(skb) = type; |
| |
| skb_queue_tail(&mrvl->txq, skb); |
| hci_uart_tx_wakeup(hu); |
| } |
| |
| static int mrvl_recv_fw_req(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct hci_mrvl_pkt *pkt = (void *)skb->data; |
| struct hci_uart *hu = hci_get_drvdata(hdev); |
| struct mrvl_data *mrvl = hu->priv; |
| int ret = 0; |
| |
| if ((pkt->lhs ^ pkt->rhs) != 0xffff) { |
| bt_dev_err(hdev, "Corrupted mrvl header"); |
| mrvl_send_ack(hu, MRVL_NAK); |
| ret = -EINVAL; |
| goto done; |
| } |
| mrvl_send_ack(hu, MRVL_ACK); |
| |
| if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags)) { |
| bt_dev_err(hdev, "Received unexpected firmware request"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| mrvl->tx_len = le16_to_cpu(pkt->lhs); |
| |
| clear_bit(STATE_FW_REQ_PENDING, &mrvl->flags); |
| smp_mb__after_atomic(); |
| wake_up_bit(&mrvl->flags, STATE_FW_REQ_PENDING); |
| |
| done: |
| kfree_skb(skb); |
| return ret; |
| } |
| |
| static int mrvl_recv_chip_ver(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct hci_mrvl_pkt *pkt = (void *)skb->data; |
| struct hci_uart *hu = hci_get_drvdata(hdev); |
| struct mrvl_data *mrvl = hu->priv; |
| u16 version = le16_to_cpu(pkt->lhs); |
| int ret = 0; |
| |
| if ((pkt->lhs ^ pkt->rhs) != 0xffff) { |
| bt_dev_err(hdev, "Corrupted mrvl header"); |
| mrvl_send_ack(hu, MRVL_NAK); |
| ret = -EINVAL; |
| goto done; |
| } |
| mrvl_send_ack(hu, MRVL_ACK); |
| |
| if (!test_bit(STATE_CHIP_VER_PENDING, &mrvl->flags)) { |
| bt_dev_err(hdev, "Received unexpected chip version"); |
| goto done; |
| } |
| |
| mrvl->id = version; |
| mrvl->rev = version >> 8; |
| |
| bt_dev_info(hdev, "Controller id = %x, rev = %x", mrvl->id, mrvl->rev); |
| |
| clear_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); |
| smp_mb__after_atomic(); |
| wake_up_bit(&mrvl->flags, STATE_CHIP_VER_PENDING); |
| |
| done: |
| kfree_skb(skb); |
| return ret; |
| } |
| |
| #define HCI_RECV_CHIP_VER \ |
| .type = HCI_CHIP_VER_PKT, \ |
| .hlen = HCI_MRVL_PKT_SIZE, \ |
| .loff = 0, \ |
| .lsize = 0, \ |
| .maxlen = HCI_MRVL_PKT_SIZE |
| |
| #define HCI_RECV_FW_REQ \ |
| .type = HCI_FW_REQ_PKT, \ |
| .hlen = HCI_MRVL_PKT_SIZE, \ |
| .loff = 0, \ |
| .lsize = 0, \ |
| .maxlen = HCI_MRVL_PKT_SIZE |
| |
| static const struct h4_recv_pkt mrvl_recv_pkts[] = { |
| { H4_RECV_ACL, .recv = hci_recv_frame }, |
| { H4_RECV_SCO, .recv = hci_recv_frame }, |
| { H4_RECV_EVENT, .recv = hci_recv_frame }, |
| { HCI_RECV_FW_REQ, .recv = mrvl_recv_fw_req }, |
| { HCI_RECV_CHIP_VER, .recv = mrvl_recv_chip_ver }, |
| }; |
| |
| static int mrvl_recv(struct hci_uart *hu, const void *data, int count) |
| { |
| struct mrvl_data *mrvl = hu->priv; |
| |
| if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) |
| return -EUNATCH; |
| |
| mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count, |
| mrvl_recv_pkts, |
| ARRAY_SIZE(mrvl_recv_pkts)); |
| if (IS_ERR(mrvl->rx_skb)) { |
| int err = PTR_ERR(mrvl->rx_skb); |
| bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); |
| mrvl->rx_skb = NULL; |
| return err; |
| } |
| |
| return count; |
| } |
| |
| static int mrvl_load_firmware(struct hci_dev *hdev, const char *name) |
| { |
| struct hci_uart *hu = hci_get_drvdata(hdev); |
| struct mrvl_data *mrvl = hu->priv; |
| const struct firmware *fw = NULL; |
| const u8 *fw_ptr, *fw_max; |
| int err; |
| |
| err = request_firmware(&fw, name, &hdev->dev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to load firmware file %s", name); |
| return err; |
| } |
| |
| fw_ptr = fw->data; |
| fw_max = fw->data + fw->size; |
| |
| bt_dev_info(hdev, "Loading %s", name); |
| |
| set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); |
| |
| while (fw_ptr <= fw_max) { |
| struct sk_buff *skb; |
| |
| /* Controller drives the firmware load by sending firmware |
| * request packets containing the expected fragment size. |
| */ |
| err = wait_on_bit_timeout(&mrvl->flags, STATE_FW_REQ_PENDING, |
| TASK_INTERRUPTIBLE, |
| msecs_to_jiffies(2000)); |
| if (err == 1) { |
| bt_dev_err(hdev, "Firmware load interrupted"); |
| err = -EINTR; |
| break; |
| } else if (err) { |
| bt_dev_err(hdev, "Firmware request timeout"); |
| err = -ETIMEDOUT; |
| break; |
| } |
| |
| bt_dev_dbg(hdev, "Firmware request, expecting %d bytes", |
| mrvl->tx_len); |
| |
| if (fw_ptr == fw_max) { |
| /* Controller requests a null size once firmware is |
| * fully loaded. If controller expects more data, there |
| * is an issue. |
| */ |
| if (!mrvl->tx_len) { |
| bt_dev_info(hdev, "Firmware loading complete"); |
| } else { |
| bt_dev_err(hdev, "Firmware loading failure"); |
| err = -EINVAL; |
| } |
| break; |
| } |
| |
| if (fw_ptr + mrvl->tx_len > fw_max) { |
| mrvl->tx_len = fw_max - fw_ptr; |
| bt_dev_dbg(hdev, "Adjusting tx_len to %d", |
| mrvl->tx_len); |
| } |
| |
| skb = bt_skb_alloc(mrvl->tx_len, GFP_KERNEL); |
| if (!skb) { |
| bt_dev_err(hdev, "Failed to alloc mem for FW packet"); |
| err = -ENOMEM; |
| break; |
| } |
| bt_cb(skb)->pkt_type = MRVL_RAW_DATA; |
| |
| skb_put_data(skb, fw_ptr, mrvl->tx_len); |
| fw_ptr += mrvl->tx_len; |
| |
| set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); |
| |
| skb_queue_tail(&mrvl->rawq, skb); |
| hci_uart_tx_wakeup(hu); |
| } |
| |
| release_firmware(fw); |
| return err; |
| } |
| |
| static int mrvl_setup(struct hci_uart *hu) |
| { |
| int err; |
| |
| hci_uart_set_flow_control(hu, true); |
| |
| err = mrvl_load_firmware(hu->hdev, "mrvl/helper_uart_3000000.bin"); |
| if (err) { |
| bt_dev_err(hu->hdev, "Unable to download firmware helper"); |
| return -EINVAL; |
| } |
| |
| hci_uart_set_baudrate(hu, 3000000); |
| hci_uart_set_flow_control(hu, false); |
| |
| err = mrvl_load_firmware(hu->hdev, "mrvl/uart8897_bt.bin"); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static const struct hci_uart_proto mrvl_proto = { |
| .id = HCI_UART_MRVL, |
| .name = "Marvell", |
| .init_speed = 115200, |
| .open = mrvl_open, |
| .close = mrvl_close, |
| .flush = mrvl_flush, |
| .setup = mrvl_setup, |
| .recv = mrvl_recv, |
| .enqueue = mrvl_enqueue, |
| .dequeue = mrvl_dequeue, |
| }; |
| |
| int __init mrvl_init(void) |
| { |
| return hci_uart_register_proto(&mrvl_proto); |
| } |
| |
| int __exit mrvl_deinit(void) |
| { |
| return hci_uart_unregister_proto(&mrvl_proto); |
| } |