| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/delay.h> |
| |
| #include "siox.h" |
| |
| #define DRIVER_NAME "siox-gpio" |
| |
| struct siox_gpio_ddata { |
| struct gpio_desc *din; |
| struct gpio_desc *dout; |
| struct gpio_desc *dclk; |
| struct gpio_desc *dld; |
| }; |
| |
| static unsigned int siox_clkhigh_ns = 1000; |
| static unsigned int siox_loadhigh_ns; |
| static unsigned int siox_bytegap_ns; |
| |
| static int siox_gpio_pushpull(struct siox_master *smaster, |
| size_t setbuf_len, const u8 setbuf[], |
| size_t getbuf_len, u8 getbuf[]) |
| { |
| struct siox_gpio_ddata *ddata = siox_master_get_devdata(smaster); |
| size_t i; |
| size_t cycles = max(setbuf_len, getbuf_len); |
| |
| /* reset data and clock */ |
| gpiod_set_value_cansleep(ddata->dout, 0); |
| gpiod_set_value_cansleep(ddata->dclk, 0); |
| |
| gpiod_set_value_cansleep(ddata->dld, 1); |
| ndelay(siox_loadhigh_ns); |
| gpiod_set_value_cansleep(ddata->dld, 0); |
| |
| for (i = 0; i < cycles; ++i) { |
| u8 set = 0, get = 0; |
| size_t j; |
| |
| if (i >= cycles - setbuf_len) |
| set = setbuf[i - (cycles - setbuf_len)]; |
| |
| for (j = 0; j < 8; ++j) { |
| get <<= 1; |
| if (gpiod_get_value_cansleep(ddata->din)) |
| get |= 1; |
| |
| /* DOUT is logically inverted */ |
| gpiod_set_value_cansleep(ddata->dout, !(set & 0x80)); |
| set <<= 1; |
| |
| gpiod_set_value_cansleep(ddata->dclk, 1); |
| ndelay(siox_clkhigh_ns); |
| gpiod_set_value_cansleep(ddata->dclk, 0); |
| } |
| |
| if (i < getbuf_len) |
| getbuf[i] = get; |
| |
| ndelay(siox_bytegap_ns); |
| } |
| |
| gpiod_set_value_cansleep(ddata->dld, 1); |
| ndelay(siox_loadhigh_ns); |
| gpiod_set_value_cansleep(ddata->dld, 0); |
| |
| /* |
| * Resetting dout isn't necessary protocol wise, but it makes the |
| * signals more pretty because the dout level is deterministic between |
| * cycles. Note that this only affects dout between the master and the |
| * first siox device. dout for the later devices depend on the output of |
| * the previous siox device. |
| */ |
| gpiod_set_value_cansleep(ddata->dout, 0); |
| |
| return 0; |
| } |
| |
| static int siox_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct siox_gpio_ddata *ddata; |
| int ret; |
| struct siox_master *smaster; |
| |
| smaster = siox_master_alloc(&pdev->dev, sizeof(*ddata)); |
| if (!smaster) { |
| dev_err(dev, "failed to allocate siox master\n"); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(pdev, smaster); |
| ddata = siox_master_get_devdata(smaster); |
| |
| ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN); |
| if (IS_ERR(ddata->din)) { |
| ret = PTR_ERR(ddata->din); |
| dev_err(dev, "Failed to get %s GPIO: %d\n", "din", ret); |
| goto err; |
| } |
| |
| ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW); |
| if (IS_ERR(ddata->dout)) { |
| ret = PTR_ERR(ddata->dout); |
| dev_err(dev, "Failed to get %s GPIO: %d\n", "dout", ret); |
| goto err; |
| } |
| |
| ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW); |
| if (IS_ERR(ddata->dclk)) { |
| ret = PTR_ERR(ddata->dclk); |
| dev_err(dev, "Failed to get %s GPIO: %d\n", "dclk", ret); |
| goto err; |
| } |
| |
| ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW); |
| if (IS_ERR(ddata->dld)) { |
| ret = PTR_ERR(ddata->dld); |
| dev_err(dev, "Failed to get %s GPIO: %d\n", "dld", ret); |
| goto err; |
| } |
| |
| smaster->pushpull = siox_gpio_pushpull; |
| /* XXX: determine automatically like spi does */ |
| smaster->busno = 0; |
| |
| ret = siox_master_register(smaster); |
| if (ret) { |
| dev_err(dev, "Failed to register siox master: %d\n", ret); |
| err: |
| siox_master_put(smaster); |
| } |
| |
| return ret; |
| } |
| |
| static int siox_gpio_remove(struct platform_device *pdev) |
| { |
| struct siox_master *master = platform_get_drvdata(pdev); |
| |
| siox_master_unregister(master); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id siox_gpio_dt_ids[] = { |
| { .compatible = "eckelmann,siox-gpio", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, siox_gpio_dt_ids); |
| |
| static struct platform_driver siox_gpio_driver = { |
| .probe = siox_gpio_probe, |
| .remove = siox_gpio_remove, |
| |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = siox_gpio_dt_ids, |
| }, |
| }; |
| module_platform_driver(siox_gpio_driver); |
| |
| MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |