| /* |
| * MixCom Watchdog: A Simple Hardware Watchdog Device |
| * Based on Softdog driver by Alan Cox and PC Watchdog driver by Ken Hollis |
| * |
| * Author: Gergely Madarasz <gorgo@itc.hu> |
| * |
| * Copyright (c) 1999 ITConsult-Pro Co. <info@itc.hu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Version 0.1 (99/04/15): |
| * - first version |
| * |
| * Version 0.2 (99/06/16): |
| * - added kernel timer watchdog ping after close |
| * since the hardware does not support watchdog shutdown |
| * |
| * Version 0.3 (99/06/21): |
| * - added WDIOC_GETSTATUS and WDIOC_GETSUPPORT ioctl calls |
| * |
| * Version 0.3.1 (99/06/22): |
| * - allow module removal while internal timer is active, |
| * print warning about probable reset |
| * |
| * Version 0.4 (99/11/15): |
| * - support for one more type board |
| * |
| * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com> |
| * - added nowayout module option to override |
| * CONFIG_WATCHDOG_NOWAYOUT |
| * |
| * Version 0.6 (2002/04/12): Rob Radez <rob@osinvestor.com> |
| * - make mixcomwd_opened unsigned, |
| * removed lock_kernel/unlock_kernel from mixcomwd_release, |
| * modified ioctl a bit to conform to API |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define VERSION "0.6" |
| #define WATCHDOG_NAME "mixcomwd" |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/miscdevice.h> |
| #include <linux/ioport.h> |
| #include <linux/watchdog.h> |
| #include <linux/fs.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/jiffies.h> |
| #include <linux/timer.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| |
| /* |
| * We have two types of cards that can be probed: |
| * 1) The Mixcom cards: these cards can be found at addresses |
| * 0x180, 0x280, 0x380 with an additional offset of 0xc10. |
| * (Or 0xd90, 0xe90, 0xf90). |
| * 2) The FlashCOM cards: these cards can be set up at |
| * 0x300 -> 0x378, in 0x8 jumps with an offset of 0x04. |
| * (Or 0x304 -> 0x37c in 0x8 jumps). |
| * Each card has it's own ID. |
| */ |
| #define MIXCOM_ID 0x11 |
| #define FLASHCOM_ID 0x18 |
| static struct { |
| int ioport; |
| int id; |
| } mixcomwd_io_info[] = { |
| /* The Mixcom cards */ |
| {0x0d90, MIXCOM_ID}, |
| {0x0e90, MIXCOM_ID}, |
| {0x0f90, MIXCOM_ID}, |
| /* The FlashCOM cards */ |
| {0x0304, FLASHCOM_ID}, |
| {0x030c, FLASHCOM_ID}, |
| {0x0314, FLASHCOM_ID}, |
| {0x031c, FLASHCOM_ID}, |
| {0x0324, FLASHCOM_ID}, |
| {0x032c, FLASHCOM_ID}, |
| {0x0334, FLASHCOM_ID}, |
| {0x033c, FLASHCOM_ID}, |
| {0x0344, FLASHCOM_ID}, |
| {0x034c, FLASHCOM_ID}, |
| {0x0354, FLASHCOM_ID}, |
| {0x035c, FLASHCOM_ID}, |
| {0x0364, FLASHCOM_ID}, |
| {0x036c, FLASHCOM_ID}, |
| {0x0374, FLASHCOM_ID}, |
| {0x037c, FLASHCOM_ID}, |
| /* The end of the list */ |
| {0x0000, 0}, |
| }; |
| |
| static void mixcomwd_timerfun(struct timer_list *unused); |
| |
| static unsigned long mixcomwd_opened; /* long req'd for setbit --RR */ |
| |
| static int watchdog_port; |
| static int mixcomwd_timer_alive; |
| static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun); |
| static char expect_close; |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static void mixcomwd_ping(void) |
| { |
| outb_p(55, watchdog_port); |
| return; |
| } |
| |
| static void mixcomwd_timerfun(struct timer_list *unused) |
| { |
| mixcomwd_ping(); |
| mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); |
| } |
| |
| /* |
| * Allow only one person to hold it open |
| */ |
| |
| static int mixcomwd_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(0, &mixcomwd_opened)) |
| return -EBUSY; |
| |
| mixcomwd_ping(); |
| |
| if (nowayout) |
| /* |
| * fops_get() code via open() has already done |
| * a try_module_get() so it is safe to do the |
| * __module_get(). |
| */ |
| __module_get(THIS_MODULE); |
| else { |
| if (mixcomwd_timer_alive) { |
| del_timer(&mixcomwd_timer); |
| mixcomwd_timer_alive = 0; |
| } |
| } |
| return nonseekable_open(inode, file); |
| } |
| |
| static int mixcomwd_release(struct inode *inode, struct file *file) |
| { |
| if (expect_close == 42) { |
| if (mixcomwd_timer_alive) { |
| pr_err("release called while internal timer alive\n"); |
| return -EBUSY; |
| } |
| mixcomwd_timer_alive = 1; |
| mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); |
| } else |
| pr_crit("WDT device closed unexpectedly. WDT will not stop!\n"); |
| |
| clear_bit(0, &mixcomwd_opened); |
| expect_close = 0; |
| return 0; |
| } |
| |
| |
| static ssize_t mixcomwd_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* In case it was set long ago */ |
| expect_close = 0; |
| |
| for (i = 0; i != len; i++) { |
| char c; |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_close = 42; |
| } |
| } |
| mixcomwd_ping(); |
| } |
| return len; |
| } |
| |
| static long mixcomwd_ioctl(struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| int status; |
| static const struct watchdog_info ident = { |
| .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| .firmware_version = 1, |
| .identity = "MixCOM watchdog", |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| if (copy_to_user(argp, &ident, sizeof(ident))) |
| return -EFAULT; |
| break; |
| case WDIOC_GETSTATUS: |
| status = mixcomwd_opened; |
| if (!nowayout) |
| status |= mixcomwd_timer_alive; |
| return put_user(status, p); |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| case WDIOC_KEEPALIVE: |
| mixcomwd_ping(); |
| break; |
| default: |
| return -ENOTTY; |
| } |
| return 0; |
| } |
| |
| static const struct file_operations mixcomwd_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = mixcomwd_write, |
| .unlocked_ioctl = mixcomwd_ioctl, |
| .open = mixcomwd_open, |
| .release = mixcomwd_release, |
| }; |
| |
| static struct miscdevice mixcomwd_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &mixcomwd_fops, |
| }; |
| |
| static int __init checkcard(int port, int card_id) |
| { |
| int id; |
| |
| if (!request_region(port, 1, "MixCOM watchdog")) |
| return 0; |
| |
| id = inb_p(port); |
| if (card_id == MIXCOM_ID) |
| id &= 0x3f; |
| |
| if (id != card_id) { |
| release_region(port, 1); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int __init mixcomwd_init(void) |
| { |
| int i, ret, found = 0; |
| |
| for (i = 0; !found && mixcomwd_io_info[i].ioport != 0; i++) { |
| if (checkcard(mixcomwd_io_info[i].ioport, |
| mixcomwd_io_info[i].id)) { |
| found = 1; |
| watchdog_port = mixcomwd_io_info[i].ioport; |
| } |
| } |
| |
| if (!found) { |
| pr_err("No card detected, or port not available\n"); |
| return -ENODEV; |
| } |
| |
| ret = misc_register(&mixcomwd_miscdev); |
| if (ret) { |
| pr_err("cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, ret); |
| goto error_misc_register_watchdog; |
| } |
| |
| pr_info("MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", |
| VERSION, watchdog_port); |
| |
| return 0; |
| |
| error_misc_register_watchdog: |
| release_region(watchdog_port, 1); |
| watchdog_port = 0x0000; |
| return ret; |
| } |
| |
| static void __exit mixcomwd_exit(void) |
| { |
| if (!nowayout) { |
| if (mixcomwd_timer_alive) { |
| pr_warn("I quit now, hardware will probably reboot!\n"); |
| del_timer_sync(&mixcomwd_timer); |
| mixcomwd_timer_alive = 0; |
| } |
| } |
| misc_deregister(&mixcomwd_miscdev); |
| release_region(watchdog_port, 1); |
| } |
| |
| module_init(mixcomwd_init); |
| module_exit(mixcomwd_exit); |
| |
| MODULE_AUTHOR("Gergely Madarasz <gorgo@itc.hu>"); |
| MODULE_DESCRIPTION("MixCom Watchdog driver"); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |