| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Voltage regulation driver for active-semi ACT8945A PMIC |
| * |
| * Copyright (C) 2015 Atmel Corporation |
| * |
| * Author: Wenyou Yang <wenyou.yang@atmel.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <dt-bindings/regulator/active-semi,8945a-regulator.h> |
| |
| /* |
| * ACT8945A Global Register Map. |
| */ |
| #define ACT8945A_SYS_MODE 0x00 |
| #define ACT8945A_SYS_CTRL 0x01 |
| #define ACT8945A_SYS_UNLK_REGS 0x0b |
| #define ACT8945A_DCDC1_VSET1 0x20 |
| #define ACT8945A_DCDC1_VSET2 0x21 |
| #define ACT8945A_DCDC1_CTRL 0x22 |
| #define ACT8945A_DCDC1_SUS 0x24 |
| #define ACT8945A_DCDC2_VSET1 0x30 |
| #define ACT8945A_DCDC2_VSET2 0x31 |
| #define ACT8945A_DCDC2_CTRL 0x32 |
| #define ACT8945A_DCDC2_SUS 0x34 |
| #define ACT8945A_DCDC3_VSET1 0x40 |
| #define ACT8945A_DCDC3_VSET2 0x41 |
| #define ACT8945A_DCDC3_CTRL 0x42 |
| #define ACT8945A_DCDC3_SUS 0x44 |
| #define ACT8945A_LDO1_VSET 0x50 |
| #define ACT8945A_LDO1_CTRL 0x51 |
| #define ACT8945A_LDO1_SUS 0x52 |
| #define ACT8945A_LDO2_VSET 0x54 |
| #define ACT8945A_LDO2_CTRL 0x55 |
| #define ACT8945A_LDO2_SUS 0x56 |
| #define ACT8945A_LDO3_VSET 0x60 |
| #define ACT8945A_LDO3_CTRL 0x61 |
| #define ACT8945A_LDO3_SUS 0x62 |
| #define ACT8945A_LDO4_VSET 0x64 |
| #define ACT8945A_LDO4_CTRL 0x65 |
| #define ACT8945A_LDO4_SUS 0x66 |
| |
| /* |
| * Field Definitions. |
| */ |
| #define ACT8945A_ENA 0x80 /* ON - [7] */ |
| #define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */ |
| |
| /* |
| * ACT8945A Voltage Number |
| */ |
| #define ACT8945A_VOLTAGE_NUM 64 |
| |
| enum { |
| ACT8945A_ID_DCDC1, |
| ACT8945A_ID_DCDC2, |
| ACT8945A_ID_DCDC3, |
| ACT8945A_ID_LDO1, |
| ACT8945A_ID_LDO2, |
| ACT8945A_ID_LDO3, |
| ACT8945A_ID_LDO4, |
| ACT8945A_ID_MAX, |
| }; |
| |
| struct act8945a_pmic { |
| struct regmap *regmap; |
| u32 op_mode[ACT8945A_ID_MAX]; |
| }; |
| |
| static const struct linear_range act8945a_voltage_ranges[] = { |
| REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), |
| REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), |
| REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), |
| }; |
| |
| static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable) |
| { |
| struct regmap *regmap = rdev->regmap; |
| int id = rdev_get_id(rdev); |
| int reg, val; |
| |
| switch (id) { |
| case ACT8945A_ID_DCDC1: |
| reg = ACT8945A_DCDC1_SUS; |
| val = 0xa8; |
| break; |
| case ACT8945A_ID_DCDC2: |
| reg = ACT8945A_DCDC2_SUS; |
| val = 0xa8; |
| break; |
| case ACT8945A_ID_DCDC3: |
| reg = ACT8945A_DCDC3_SUS; |
| val = 0xa8; |
| break; |
| case ACT8945A_ID_LDO1: |
| reg = ACT8945A_LDO1_SUS; |
| val = 0xe8; |
| break; |
| case ACT8945A_ID_LDO2: |
| reg = ACT8945A_LDO2_SUS; |
| val = 0xe8; |
| break; |
| case ACT8945A_ID_LDO3: |
| reg = ACT8945A_LDO3_SUS; |
| val = 0xe8; |
| break; |
| case ACT8945A_ID_LDO4: |
| reg = ACT8945A_LDO4_SUS; |
| val = 0xe8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (enable) |
| val |= BIT(4); |
| |
| /* |
| * Ask the PMIC to enable/disable this output when entering hibernate |
| * mode. |
| */ |
| return regmap_write(regmap, reg, val); |
| } |
| |
| static int act8945a_set_suspend_enable(struct regulator_dev *rdev) |
| { |
| return act8945a_set_suspend_state(rdev, true); |
| } |
| |
| static int act8945a_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| return act8945a_set_suspend_state(rdev, false); |
| } |
| |
| static unsigned int act8945a_of_map_mode(unsigned int mode) |
| { |
| switch (mode) { |
| case ACT8945A_REGULATOR_MODE_FIXED: |
| case ACT8945A_REGULATOR_MODE_NORMAL: |
| return REGULATOR_MODE_NORMAL; |
| case ACT8945A_REGULATOR_MODE_LOWPOWER: |
| return REGULATOR_MODE_STANDBY; |
| default: |
| return REGULATOR_MODE_INVALID; |
| } |
| } |
| |
| static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev); |
| struct regmap *regmap = rdev->regmap; |
| int id = rdev_get_id(rdev); |
| int reg, ret, val = 0; |
| |
| switch (id) { |
| case ACT8945A_ID_DCDC1: |
| reg = ACT8945A_DCDC1_CTRL; |
| break; |
| case ACT8945A_ID_DCDC2: |
| reg = ACT8945A_DCDC2_CTRL; |
| break; |
| case ACT8945A_ID_DCDC3: |
| reg = ACT8945A_DCDC3_CTRL; |
| break; |
| case ACT8945A_ID_LDO1: |
| reg = ACT8945A_LDO1_CTRL; |
| break; |
| case ACT8945A_ID_LDO2: |
| reg = ACT8945A_LDO2_CTRL; |
| break; |
| case ACT8945A_ID_LDO3: |
| reg = ACT8945A_LDO3_CTRL; |
| break; |
| case ACT8945A_ID_LDO4: |
| reg = ACT8945A_LDO4_CTRL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (mode) { |
| case REGULATOR_MODE_STANDBY: |
| if (id > ACT8945A_ID_DCDC3) |
| val = BIT(5); |
| break; |
| case REGULATOR_MODE_NORMAL: |
| if (id <= ACT8945A_ID_DCDC3) |
| val = BIT(5); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(regmap, reg, BIT(5), val); |
| if (ret) |
| return ret; |
| |
| act8945a->op_mode[id] = mode; |
| |
| return 0; |
| } |
| |
| static unsigned int act8945a_get_mode(struct regulator_dev *rdev) |
| { |
| struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| |
| if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX) |
| return -EINVAL; |
| |
| return act8945a->op_mode[id]; |
| } |
| |
| static const struct regulator_ops act8945a_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .set_mode = act8945a_set_mode, |
| .get_mode = act8945a_get_mode, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_suspend_enable = act8945a_set_suspend_enable, |
| .set_suspend_disable = act8945a_set_suspend_disable, |
| }; |
| |
| #define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \ |
| [_family##_ID_##_id] = { \ |
| .name = _name, \ |
| .supply_name = _supply, \ |
| .of_match = of_match_ptr("REG_"#_id), \ |
| .of_map_mode = act8945a_of_map_mode, \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .id = _family##_ID_##_id, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .ops = &act8945a_ops, \ |
| .n_voltages = ACT8945A_VOLTAGE_NUM, \ |
| .linear_ranges = act8945a_voltage_ranges, \ |
| .n_linear_ranges = ARRAY_SIZE(act8945a_voltage_ranges), \ |
| .vsel_reg = _family##_##_id##_##_vsel_reg, \ |
| .vsel_mask = ACT8945A_VSEL_MASK, \ |
| .enable_reg = _family##_##_id##_CTRL, \ |
| .enable_mask = ACT8945A_ENA, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| static const struct regulator_desc act8945a_regulators[] = { |
| ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"), |
| ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"), |
| ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"), |
| ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), |
| ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), |
| ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), |
| ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), |
| }; |
| |
| static const struct regulator_desc act8945a_alt_regulators[] = { |
| ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"), |
| ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"), |
| ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"), |
| ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), |
| ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), |
| ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), |
| ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), |
| }; |
| |
| static int act8945a_pmic_probe(struct platform_device *pdev) |
| { |
| struct regulator_config config = { }; |
| const struct regulator_desc *regulators; |
| struct act8945a_pmic *act8945a; |
| struct regulator_dev *rdev; |
| int i, num_regulators; |
| bool voltage_select; |
| |
| act8945a = devm_kzalloc(&pdev->dev, sizeof(*act8945a), GFP_KERNEL); |
| if (!act8945a) |
| return -ENOMEM; |
| |
| act8945a->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!act8945a->regmap) { |
| dev_err(&pdev->dev, |
| "could not retrieve regmap from parent device\n"); |
| return -EINVAL; |
| } |
| |
| voltage_select = of_property_read_bool(pdev->dev.parent->of_node, |
| "active-semi,vsel-high"); |
| |
| if (voltage_select) { |
| regulators = act8945a_alt_regulators; |
| num_regulators = ARRAY_SIZE(act8945a_alt_regulators); |
| } else { |
| regulators = act8945a_regulators; |
| num_regulators = ARRAY_SIZE(act8945a_regulators); |
| } |
| |
| config.dev = &pdev->dev; |
| config.dev->of_node = pdev->dev.parent->of_node; |
| config.driver_data = act8945a; |
| for (i = 0; i < num_regulators; i++) { |
| rdev = devm_regulator_register(&pdev->dev, ®ulators[i], |
| &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, |
| "failed to register %s regulator\n", |
| regulators[i].name); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| platform_set_drvdata(pdev, act8945a); |
| |
| /* Unlock expert registers. */ |
| return regmap_write(act8945a->regmap, ACT8945A_SYS_UNLK_REGS, 0xef); |
| } |
| |
| static int __maybe_unused act8945a_suspend(struct device *pdev) |
| { |
| struct act8945a_pmic *act8945a = dev_get_drvdata(pdev); |
| |
| /* |
| * Ask the PMIC to enter the suspend mode on the next PWRHLD |
| * transition. |
| */ |
| return regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x42); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(act8945a_pm, act8945a_suspend, NULL); |
| |
| static void act8945a_pmic_shutdown(struct platform_device *pdev) |
| { |
| struct act8945a_pmic *act8945a = platform_get_drvdata(pdev); |
| |
| /* |
| * Ask the PMIC to shutdown everything on the next PWRHLD transition. |
| */ |
| regmap_write(act8945a->regmap, ACT8945A_SYS_CTRL, 0x0); |
| } |
| |
| static struct platform_driver act8945a_pmic_driver = { |
| .driver = { |
| .name = "act8945a-regulator", |
| .pm = &act8945a_pm, |
| }, |
| .probe = act8945a_pmic_probe, |
| .shutdown = act8945a_pmic_shutdown, |
| }; |
| module_platform_driver(act8945a_pmic_driver); |
| |
| MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver"); |
| MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); |
| MODULE_LICENSE("GPL"); |