| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * drivers/media/i2c/ccs-pll.c |
| * |
| * Generic MIPI CCS/SMIA/SMIA++ PLL calculator |
| * |
| * Copyright (C) 2020 Intel Corporation |
| * Copyright (C) 2011--2012 Nokia Corporation |
| * Contact: Sakari Ailus <sakari.ailus@linux.intel.com> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/gcd.h> |
| #include <linux/lcm.h> |
| #include <linux/module.h> |
| |
| #include "ccs-pll.h" |
| |
| /* Return an even number or one. */ |
| static inline u32 clk_div_even(u32 a) |
| { |
| return max_t(u32, 1, a & ~1); |
| } |
| |
| /* Return an even number or one. */ |
| static inline u32 clk_div_even_up(u32 a) |
| { |
| if (a == 1) |
| return 1; |
| return (a + 1) & ~1; |
| } |
| |
| static inline u32 is_one_or_even(u32 a) |
| { |
| if (a == 1) |
| return 1; |
| if (a & 1) |
| return 0; |
| |
| return 1; |
| } |
| |
| static inline u32 one_or_more(u32 a) |
| { |
| return a ?: 1; |
| } |
| |
| static int bounds_check(struct device *dev, u32 val, |
| u32 min, u32 max, const char *prefix, |
| char *str) |
| { |
| if (val >= min && val <= max) |
| return 0; |
| |
| dev_dbg(dev, "%s_%s out of bounds: %d (%d--%d)\n", prefix, |
| str, val, min, max); |
| |
| return -EINVAL; |
| } |
| |
| #define PLL_OP 1 |
| #define PLL_VT 2 |
| |
| static const char *pll_string(unsigned int which) |
| { |
| switch (which) { |
| case PLL_OP: |
| return "op"; |
| case PLL_VT: |
| return "vt"; |
| } |
| |
| return NULL; |
| } |
| |
| #define PLL_FL(f) CCS_PLL_FLAG_##f |
| |
| static void print_pll(struct device *dev, struct ccs_pll *pll) |
| { |
| const struct { |
| struct ccs_pll_branch_fr *fr; |
| struct ccs_pll_branch_bk *bk; |
| unsigned int which; |
| } branches[] = { |
| { &pll->vt_fr, &pll->vt_bk, PLL_VT }, |
| { &pll->op_fr, &pll->op_bk, PLL_OP } |
| }, *br; |
| unsigned int i; |
| |
| dev_dbg(dev, "ext_clk_freq_hz\t\t%u\n", pll->ext_clk_freq_hz); |
| |
| for (i = 0, br = branches; i < ARRAY_SIZE(branches); i++, br++) { |
| const char *s = pll_string(br->which); |
| |
| if (pll->flags & CCS_PLL_FLAG_DUAL_PLL || |
| br->which == PLL_VT) { |
| dev_dbg(dev, "%s_pre_pll_clk_div\t\t%u\n", s, |
| br->fr->pre_pll_clk_div); |
| dev_dbg(dev, "%s_pll_multiplier\t\t%u\n", s, |
| br->fr->pll_multiplier); |
| |
| dev_dbg(dev, "%s_pll_ip_clk_freq_hz\t%u\n", s, |
| br->fr->pll_ip_clk_freq_hz); |
| dev_dbg(dev, "%s_pll_op_clk_freq_hz\t%u\n", s, |
| br->fr->pll_op_clk_freq_hz); |
| } |
| |
| if (!(pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) || |
| br->which == PLL_VT) { |
| dev_dbg(dev, "%s_sys_clk_div\t\t%u\n", s, |
| br->bk->sys_clk_div); |
| dev_dbg(dev, "%s_pix_clk_div\t\t%u\n", s, |
| br->bk->pix_clk_div); |
| |
| dev_dbg(dev, "%s_sys_clk_freq_hz\t%u\n", s, |
| br->bk->sys_clk_freq_hz); |
| dev_dbg(dev, "%s_pix_clk_freq_hz\t%u\n", s, |
| br->bk->pix_clk_freq_hz); |
| } |
| } |
| |
| dev_dbg(dev, "pixel rate in pixel array:\t%u\n", |
| pll->pixel_rate_pixel_array); |
| dev_dbg(dev, "pixel rate on CSI-2 bus:\t%u\n", |
| pll->pixel_rate_csi); |
| |
| dev_dbg(dev, "flags%s%s%s%s%s%s%s%s%s\n", |
| pll->flags & PLL_FL(LANE_SPEED_MODEL) ? " lane-speed" : "", |
| pll->flags & PLL_FL(LINK_DECOUPLED) ? " link-decoupled" : "", |
| pll->flags & PLL_FL(EXT_IP_PLL_DIVIDER) ? |
| " ext-ip-pll-divider" : "", |
| pll->flags & PLL_FL(FLEXIBLE_OP_PIX_CLK_DIV) ? |
| " flexible-op-pix-div" : "", |
| pll->flags & PLL_FL(FIFO_DERATING) ? " fifo-derating" : "", |
| pll->flags & PLL_FL(FIFO_OVERRATING) ? " fifo-overrating" : "", |
| pll->flags & PLL_FL(DUAL_PLL) ? " dual-pll" : "", |
| pll->flags & PLL_FL(OP_SYS_DDR) ? " op-sys-ddr" : "", |
| pll->flags & PLL_FL(OP_PIX_DDR) ? " op-pix-ddr" : ""); |
| } |
| |
| static u32 op_sys_ddr(u32 flags) |
| { |
| return flags & CCS_PLL_FLAG_OP_SYS_DDR ? 1 : 0; |
| } |
| |
| static u32 op_pix_ddr(u32 flags) |
| { |
| return flags & CCS_PLL_FLAG_OP_PIX_DDR ? 1 : 0; |
| } |
| |
| static int check_fr_bounds(struct device *dev, |
| const struct ccs_pll_limits *lim, |
| struct ccs_pll *pll, unsigned int which) |
| { |
| const struct ccs_pll_branch_limits_fr *lim_fr; |
| struct ccs_pll_branch_fr *pll_fr; |
| const char *s = pll_string(which); |
| int rval; |
| |
| if (which == PLL_OP) { |
| lim_fr = &lim->op_fr; |
| pll_fr = &pll->op_fr; |
| } else { |
| lim_fr = &lim->vt_fr; |
| pll_fr = &pll->vt_fr; |
| } |
| |
| rval = bounds_check(dev, pll_fr->pre_pll_clk_div, |
| lim_fr->min_pre_pll_clk_div, |
| lim_fr->max_pre_pll_clk_div, s, "pre_pll_clk_div"); |
| |
| if (!rval) |
| rval = bounds_check(dev, pll_fr->pll_ip_clk_freq_hz, |
| lim_fr->min_pll_ip_clk_freq_hz, |
| lim_fr->max_pll_ip_clk_freq_hz, |
| s, "pll_ip_clk_freq_hz"); |
| if (!rval) |
| rval = bounds_check(dev, pll_fr->pll_multiplier, |
| lim_fr->min_pll_multiplier, |
| lim_fr->max_pll_multiplier, |
| s, "pll_multiplier"); |
| if (!rval) |
| rval = bounds_check(dev, pll_fr->pll_op_clk_freq_hz, |
| lim_fr->min_pll_op_clk_freq_hz, |
| lim_fr->max_pll_op_clk_freq_hz, |
| s, "pll_op_clk_freq_hz"); |
| |
| return rval; |
| } |
| |
| static int check_bk_bounds(struct device *dev, |
| const struct ccs_pll_limits *lim, |
| struct ccs_pll *pll, unsigned int which) |
| { |
| const struct ccs_pll_branch_limits_bk *lim_bk; |
| struct ccs_pll_branch_bk *pll_bk; |
| const char *s = pll_string(which); |
| int rval; |
| |
| if (which == PLL_OP) { |
| if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) |
| return 0; |
| |
| lim_bk = &lim->op_bk; |
| pll_bk = &pll->op_bk; |
| } else { |
| lim_bk = &lim->vt_bk; |
| pll_bk = &pll->vt_bk; |
| } |
| |
| rval = bounds_check(dev, pll_bk->sys_clk_div, |
| lim_bk->min_sys_clk_div, |
| lim_bk->max_sys_clk_div, s, "op_sys_clk_div"); |
| if (!rval) |
| rval = bounds_check(dev, pll_bk->sys_clk_freq_hz, |
| lim_bk->min_sys_clk_freq_hz, |
| lim_bk->max_sys_clk_freq_hz, |
| s, "sys_clk_freq_hz"); |
| if (!rval) |
| rval = bounds_check(dev, pll_bk->sys_clk_div, |
| lim_bk->min_sys_clk_div, |
| lim_bk->max_sys_clk_div, |
| s, "sys_clk_div"); |
| if (!rval) |
| rval = bounds_check(dev, pll_bk->pix_clk_freq_hz, |
| lim_bk->min_pix_clk_freq_hz, |
| lim_bk->max_pix_clk_freq_hz, |
| s, "pix_clk_freq_hz"); |
| |
| return rval; |
| } |
| |
| static int check_ext_bounds(struct device *dev, struct ccs_pll *pll) |
| { |
| if (!(pll->flags & CCS_PLL_FLAG_FIFO_DERATING) && |
| pll->pixel_rate_pixel_array > pll->pixel_rate_csi) { |
| dev_dbg(dev, "device does not support derating\n"); |
| return -EINVAL; |
| } |
| |
| if (!(pll->flags & CCS_PLL_FLAG_FIFO_OVERRATING) && |
| pll->pixel_rate_pixel_array < pll->pixel_rate_csi) { |
| dev_dbg(dev, "device does not support overrating\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| ccs_pll_find_vt_sys_div(struct device *dev, const struct ccs_pll_limits *lim, |
| struct ccs_pll *pll, struct ccs_pll_branch_fr *pll_fr, |
| u16 min_vt_div, u16 max_vt_div, |
| u16 *min_sys_div, u16 *max_sys_div) |
| { |
| /* |
| * Find limits for sys_clk_div. Not all values are possible with all |
| * values of pix_clk_div. |
| */ |
| *min_sys_div = lim->vt_bk.min_sys_clk_div; |
| dev_dbg(dev, "min_sys_div: %u\n", *min_sys_div); |
| *min_sys_div = max_t(u16, *min_sys_div, |
| DIV_ROUND_UP(min_vt_div, |
| lim->vt_bk.max_pix_clk_div)); |
| dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %u\n", *min_sys_div); |
| *min_sys_div = max_t(u16, *min_sys_div, |
| pll_fr->pll_op_clk_freq_hz |
| / lim->vt_bk.max_sys_clk_freq_hz); |
| dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %u\n", *min_sys_div); |
| *min_sys_div = clk_div_even_up(*min_sys_div); |
| dev_dbg(dev, "min_sys_div: one or even: %u\n", *min_sys_div); |
| |
| *max_sys_div = lim->vt_bk.max_sys_clk_div; |
| dev_dbg(dev, "max_sys_div: %u\n", *max_sys_div); |
| *max_sys_div = min_t(u16, *max_sys_div, |
| DIV_ROUND_UP(max_vt_div, |
| lim->vt_bk.min_pix_clk_div)); |
| dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %u\n", *max_sys_div); |
| *max_sys_div = min_t(u16, *max_sys_div, |
| DIV_ROUND_UP(pll_fr->pll_op_clk_freq_hz, |
| lim->vt_bk.min_pix_clk_freq_hz)); |
| dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %u\n", *max_sys_div); |
| } |
| |
| #define CPHY_CONST 7 |
| #define DPHY_CONST 16 |
| #define PHY_CONST_DIV 16 |
| |
| static inline int |
| __ccs_pll_calculate_vt_tree(struct device *dev, |
| const struct ccs_pll_limits *lim, |
| struct ccs_pll *pll, u32 mul, u32 div) |
| { |
| const struct ccs_pll_branch_limits_fr *lim_fr = &lim->vt_fr; |
| const struct ccs_pll_branch_limits_bk *lim_bk = &lim->vt_bk; |
| struct ccs_pll_branch_fr *pll_fr = &pll->vt_fr; |
| struct ccs_pll_branch_bk *pll_bk = &pll->vt_bk; |
| u32 more_mul; |
| u16 best_pix_div = SHRT_MAX >> 1, best_div; |
| u16 vt_div, min_sys_div, max_sys_div, sys_div; |
| |
| pll_fr->pll_ip_clk_freq_hz = |
| pll->ext_clk_freq_hz / pll_fr->pre_pll_clk_div; |
| |
| dev_dbg(dev, "vt_pll_ip_clk_freq_hz %u\n", pll_fr->pll_ip_clk_freq_hz); |
| |
| more_mul = one_or_more(DIV_ROUND_UP(lim_fr->min_pll_op_clk_freq_hz, |
| pll_fr->pll_ip_clk_freq_hz * mul)); |
| |
| dev_dbg(dev, "more_mul: %u\n", more_mul); |
| more_mul *= DIV_ROUND_UP(lim_fr->min_pll_multiplier, mul * more_mul); |
| dev_dbg(dev, "more_mul2: %u\n", more_mul); |
| |
| pll_fr->pll_multiplier = mul * more_mul; |
| |
| if (pll_fr->pll_multiplier * pll_fr->pll_ip_clk_freq_hz > |
| lim_fr->max_pll_op_clk_freq_hz) |
| return -EINVAL; |
| |
| pll_fr->pll_op_clk_freq_hz = |
| pll_fr->pll_ip_clk_freq_hz * pll_fr->pll_multiplier; |
| |
| vt_div = div * more_mul; |
| |
| ccs_pll_find_vt_sys_div(dev, lim, pll, pll_fr, vt_div, vt_div, |
| &min_sys_div, &max_sys_div); |
| |
| max_sys_div = (vt_div & 1) ? 1 : max_sys_div; |
| |
| dev_dbg(dev, "vt min/max_sys_div: %u,%u\n", min_sys_div, max_sys_div); |
| |
| for (sys_div = min_sys_div; sys_div <= max_sys_div; |
| sys_div += 2 - (sys_div & 1)) { |
| u16 pix_div; |
| |
| if (vt_div % sys_div) |
| continue; |
| |
| pix_div = vt_div / sys_div; |
| |
| if (pix_div < lim_bk->min_pix_clk_div || |
| pix_div > lim_bk->max_pix_clk_div) { |
| dev_dbg(dev, |
| "pix_div %u too small or too big (%u--%u)\n", |
| pix_div, |
| lim_bk->min_pix_clk_div, |
| lim_bk->max_pix_clk_div); |
| continue; |
| } |
| |
| dev_dbg(dev, "sys/pix/best_pix: %u,%u,%u\n", sys_div, pix_div, |
| best_pix_div); |
| |
| if (pix_div * sys_div <= best_pix_div) { |
| best_pix_div = pix_div; |
| best_div = pix_div * sys_div; |
| } |
| } |
| if (best_pix_div == SHRT_MAX >> 1) |
| return -EINVAL; |
| |
| pll_bk->sys_clk_div = best_div / best_pix_div; |
| pll_bk->pix_clk_div = best_pix_div; |
| |
| pll_bk->sys_clk_freq_hz = |
| pll_fr->pll_op_clk_freq_hz / pll_bk->sys_clk_div; |
| pll_bk->pix_clk_freq_hz = |
| pll_bk->sys_clk_freq_hz / pll_bk->pix_clk_div; |
| |
| pll->pixel_rate_pixel_array = |
| pll_bk->pix_clk_freq_hz * pll->vt_lanes; |
| |
| return 0; |
| } |
| |
| static int ccs_pll_calculate_vt_tree(struct device *dev, |
| const struct ccs_pll_limits *lim, |
| struct ccs_pll *pll) |
| { |
| const struct ccs_pll_branch_limits_fr *lim_fr = &lim->vt_fr; |
| struct ccs_pll_branch_fr *pll_fr = &pll->vt_fr; |
| u16 min_pre_pll_clk_div = lim_fr->min_pre_pll_clk_div; |
| u16 max_pre_pll_clk_div = lim_fr->max_pre_pll_clk_div; |
| u32 pre_mul, pre_div; |
| |
| pre_div = gcd(pll->pixel_rate_csi, |
| pll->ext_clk_freq_hz * pll->vt_lanes); |
| pre_mul = pll->pixel_rate_csi / pre_div; |
| pre_div = pll->ext_clk_freq_hz * pll->vt_lanes / pre_div; |
| |
| /* Make sure PLL input frequency is within limits */ |
| max_pre_pll_clk_div = |
| min_t(u16, max_pre_pll_clk_div, |
| DIV_ROUND_UP(pll->ext_clk_freq_hz, |
| lim_fr->min_pll_ip_clk_freq_hz)); |
| |
| min_pre_pll_clk_div = max_t(u16, min_pre_pll_clk_div, |
| pll->ext_clk_freq_hz / |
| lim_fr->max_pll_ip_clk_freq_hz); |
| |
| dev_dbg(dev, "vt min/max_pre_pll_clk_div: %u,%u\n", |
| min_pre_pll_clk_div, max_pre_pll_clk_div); |
| |
| for (pll_fr->pre_pll_clk_div = min_pre_pll_clk_div; |
| pll_fr->pre_pll_clk_div <= max_pre_pll_clk_div; |
| pll_fr->pre_pll_clk_div += |
| (pll->flags & CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER) ? 1 : |
| 2 - (pll_fr->pre_pll_clk_div & 1)) { |
| u32 mul, div; |
| int rval; |
| |
| div = gcd(pre_mul * pll_fr->pre_pll_clk_div, pre_div); |
| mul = pre_mul * pll_fr->pre_pll_clk_div / div; |
| div = pre_div / div; |
| |
| dev_dbg(dev, "vt pre-div/mul/div: %u,%u,%u\n", |
| pll_fr->pre_pll_clk_div, mul, div); |
| |
| rval = __ccs_pll_calculate_vt_tree(dev, lim, pll, |
| mul, div); |
| if (rval) |
| continue; |
| |
| rval = check_fr_bounds(dev, lim, pll, PLL_VT); |
| if (rval) |
| continue; |
| |
| rval = check_bk_bounds(dev, lim, pll, PLL_VT); |
| if (rval) |
| continue; |
| |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static void |
| ccs_pll_calculate_vt(struct device *dev, const struct ccs_pll_limits *lim, |
| const struct ccs_pll_branch_limits_bk *op_lim_bk, |
| struct ccs_pll *pll, struct ccs_pll_branch_fr *pll_fr, |
| struct ccs_pll_branch_bk *op_pll_bk, bool cphy, |
| u32 phy_const) |
| { |
| u16 sys_div; |
| u16 best_pix_div = SHRT_MAX >> 1; |
| u16 vt_op_binning_div; |
| u16 min_vt_div, max_vt_div, vt_div; |
| u16 min_sys_div, max_sys_div; |
| |
| if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) |
| goto out_calc_pixel_rate; |
| |
| /* |
| * Find out whether a sensor supports derating. If it does not, VT and |
| * OP domains are required to run at the same pixel rate. |
| */ |
| if (!(pll->flags & CCS_PLL_FLAG_FIFO_DERATING)) { |
| min_vt_div = |
| op_pll_bk->sys_clk_div * op_pll_bk->pix_clk_div |
| * pll->vt_lanes * phy_const / pll->op_lanes |
| / (PHY_CONST_DIV << op_pix_ddr(pll->flags)); |
| } else { |
| /* |
| * Some sensors perform analogue binning and some do this |
| * digitally. The ones doing this digitally can be roughly be |
| * found out using this formula. The ones doing this digitally |
| * should run at higher clock rate, so smaller divisor is used |
| * on video timing side. |
| */ |
| if (lim->min_line_length_pck_bin > lim->min_line_length_pck |
| / pll->binning_horizontal) |
| vt_op_binning_div = pll->binning_horizontal; |
| else |
| vt_op_binning_div = 1; |
| dev_dbg(dev, "vt_op_binning_div: %u\n", vt_op_binning_div); |
| |
| /* |
| * Profile 2 supports vt_pix_clk_div E [4, 10] |
| * |
| * Horizontal binning can be used as a base for difference in |
| * divisors. One must make sure that horizontal blanking is |
| * enough to accommodate the CSI-2 sync codes. |
| * |
| * Take scaling factor and number of VT lanes into account as well. |
| * |
| * Find absolute limits for the factor of vt divider. |
| */ |
| dev_dbg(dev, "scale_m: %u\n", pll->scale_m); |
| min_vt_div = |
| DIV_ROUND_UP(pll->bits_per_pixel |
| * op_pll_bk->sys_clk_div * pll->scale_n |
| * pll->vt_lanes * phy_const, |
| (pll->flags & |
| CCS_PLL_FLAG_LANE_SPEED_MODEL ? |
| pll->csi2.lanes : 1) |
| * vt_op_binning_div * pll->scale_m |
| * PHY_CONST_DIV << op_pix_ddr(pll->flags)); |
| } |
| |
| /* Find smallest and biggest allowed vt divisor. */ |
| dev_dbg(dev, "min_vt_div: %u\n", min_vt_div); |
| min_vt_div = max_t(u16, min_vt_div, |
| DIV_ROUND_UP(pll_fr->pll_op_clk_freq_hz, |
| lim->vt_bk.max_pix_clk_freq_hz)); |
| dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %u\n", |
| min_vt_div); |
| min_vt_div = max_t(u16, min_vt_div, lim->vt_bk.min_pix_clk_div |
| * lim->vt_bk.min_sys_clk_div); |
| dev_dbg(dev, "min_vt_div: min_vt_clk_div: %u\n", min_vt_div); |
| |
| max_vt_div = lim->vt_bk.max_sys_clk_div * lim->vt_bk.max_pix_clk_div; |
| dev_dbg(dev, "max_vt_div: %u\n", max_vt_div); |
| max_vt_div = min_t(u16, max_vt_div, |
| DIV_ROUND_UP(pll_fr->pll_op_clk_freq_hz, |
| lim->vt_bk.min_pix_clk_freq_hz)); |
| dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %u\n", |
| max_vt_div); |
| |
| ccs_pll_find_vt_sys_div(dev, lim, pll, pll_fr, min_vt_div, |
| max_vt_div, &min_sys_div, &max_sys_div); |
| |
| /* |
| * Find pix_div such that a legal pix_div * sys_div results |
| * into a value which is not smaller than div, the desired |
| * divisor. |
| */ |
| for (vt_div = min_vt_div; vt_div <= max_vt_div; vt_div++) { |
| u16 __max_sys_div = vt_div & 1 ? 1 : max_sys_div; |
| |
| for (sys_div = min_sys_div; sys_div <= __max_sys_div; |
| sys_div += 2 - (sys_div & 1)) { |
| u16 pix_div; |
| u16 rounded_div; |
| |
| pix_div = DIV_ROUND_UP(vt_div, sys_div); |
| |
| if (pix_div < lim->vt_bk.min_pix_clk_div |
| || pix_div > lim->vt_bk.max_pix_clk_div) { |
| dev_dbg(dev, |
| "pix_div %u too small or too big (%u--%u)\n", |
| pix_div, |
| lim->vt_bk.min_pix_clk_div, |
| lim->vt_bk.max_pix_clk_div); |
| continue; |
| } |
| |
| rounded_div = roundup(vt_div, best_pix_div); |
| |
| /* Check if this one is better. */ |
| if (pix_div * sys_div <= rounded_div) |
| best_pix_div = pix_div; |
| |
| /* Bail out if we've already found the best value. */ |
| if (vt_div == rounded_div) |
| break; |
| } |
| if (best_pix_div < SHRT_MAX >> 1) |
| break; |
| } |
| |
| pll->vt_bk.sys_clk_div = DIV_ROUND_UP(vt_div, best_pix_div); |
| pll->vt_bk.pix_clk_div = best_pix_div; |
| |
| pll->vt_bk.sys_clk_freq_hz = |
| pll_fr->pll_op_clk_freq_hz / pll->vt_bk.sys_clk_div; |
| pll->vt_bk.pix_clk_freq_hz = |
| pll->vt_bk.sys_clk_freq_hz / pll->vt_bk.pix_clk_div; |
| |
| out_calc_pixel_rate: |
| pll->pixel_rate_pixel_array = |
| pll->vt_bk.pix_clk_freq_hz * pll->vt_lanes; |
| } |
| |
| /* |
| * Heuristically guess the PLL tree for a given common multiplier and |
| * divisor. Begin with the operational timing and continue to video |
| * timing once operational timing has been verified. |
| * |
| * @mul is the PLL multiplier and @div is the common divisor |
| * (pre_pll_clk_div and op_sys_clk_div combined). The final PLL |
| * multiplier will be a multiple of @mul. |
| * |
| * @return Zero on success, error code on error. |
| */ |
| static int |
| ccs_pll_calculate_op(struct device *dev, const struct ccs_pll_limits *lim, |
| const struct ccs_pll_branch_limits_fr *op_lim_fr, |
| const struct ccs_pll_branch_limits_bk *op_lim_bk, |
| struct ccs_pll *pll, struct ccs_pll_branch_fr *op_pll_fr, |
| struct ccs_pll_branch_bk *op_pll_bk, u32 mul, |
| u32 div, u32 op_sys_clk_freq_hz_sdr, u32 l, |
| bool cphy, u32 phy_const) |
| { |
| /* |
| * Higher multipliers (and divisors) are often required than |
| * necessitated by the external clock and the output clocks. |
| * There are limits for all values in the clock tree. These |
| * are the minimum and maximum multiplier for mul. |
| */ |
| u32 more_mul_min, more_mul_max; |
| u32 more_mul_factor; |
| u32 i; |
| |
| /* |
| * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be |
| * too high. |
| */ |
| dev_dbg(dev, "op_pre_pll_clk_div %u\n", op_pll_fr->pre_pll_clk_div); |
| |
| /* Don't go above max pll multiplier. */ |
| more_mul_max = op_lim_fr->max_pll_multiplier / mul; |
| dev_dbg(dev, "more_mul_max: max_op_pll_multiplier check: %u\n", |
| more_mul_max); |
| /* Don't go above max pll op frequency. */ |
| more_mul_max = |
| min_t(u32, |
| more_mul_max, |
| op_lim_fr->max_pll_op_clk_freq_hz |
| / (pll->ext_clk_freq_hz / |
| op_pll_fr->pre_pll_clk_div * mul)); |
| dev_dbg(dev, "more_mul_max: max_pll_op_clk_freq_hz check: %u\n", |
| more_mul_max); |
| /* Don't go above the division capability of op sys clock divider. */ |
| more_mul_max = min(more_mul_max, |
| op_lim_bk->max_sys_clk_div * op_pll_fr->pre_pll_clk_div |
| / div); |
| dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %u\n", |
| more_mul_max); |
| /* Ensure we won't go above max_pll_multiplier. */ |
| more_mul_max = min(more_mul_max, op_lim_fr->max_pll_multiplier / mul); |
| dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %u\n", |
| more_mul_max); |
| |
| /* Ensure we won't go below min_pll_op_clk_freq_hz. */ |
| more_mul_min = DIV_ROUND_UP(op_lim_fr->min_pll_op_clk_freq_hz, |
| pll->ext_clk_freq_hz / |
| op_pll_fr->pre_pll_clk_div * mul); |
| dev_dbg(dev, "more_mul_min: min_op_pll_op_clk_freq_hz check: %u\n", |
| more_mul_min); |
| /* Ensure we won't go below min_pll_multiplier. */ |
| more_mul_min = max(more_mul_min, |
| DIV_ROUND_UP(op_lim_fr->min_pll_multiplier, mul)); |
| dev_dbg(dev, "more_mul_min: min_op_pll_multiplier check: %u\n", |
| more_mul_min); |
| |
| if (more_mul_min > more_mul_max) { |
| dev_dbg(dev, |
| "unable to compute more_mul_min and more_mul_max\n"); |
| return -EINVAL; |
| } |
| |
| more_mul_factor = lcm(div, op_pll_fr->pre_pll_clk_div) / div; |
| dev_dbg(dev, "more_mul_factor: %u\n", more_mul_factor); |
| more_mul_factor = lcm(more_mul_factor, op_lim_bk->min_sys_clk_div); |
| dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n", |
| more_mul_factor); |
| i = roundup(more_mul_min, more_mul_factor); |
| if (!is_one_or_even(i)) |
| i <<= 1; |
| |
| dev_dbg(dev, "final more_mul: %u\n", i); |
| if (i > more_mul_max) { |
| dev_dbg(dev, "final more_mul is bad, max %u\n", more_mul_max); |
| return -EINVAL; |
| } |
| |
| op_pll_fr->pll_multiplier = mul * i; |
| op_pll_bk->sys_clk_div = div * i / op_pll_fr->pre_pll_clk_div; |
| dev_dbg(dev, "op_sys_clk_div: %u\n", op_pll_bk->sys_clk_div); |
| |
| op_pll_fr->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz |
| / op_pll_fr->pre_pll_clk_div; |
| |
| op_pll_fr->pll_op_clk_freq_hz = op_pll_fr->pll_ip_clk_freq_hz |
| * op_pll_fr->pll_multiplier; |
| |
| if (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL) |
| op_pll_bk->pix_clk_div = |
| (pll->bits_per_pixel |
| * pll->op_lanes * (phy_const << op_sys_ddr(pll->flags)) |
| / PHY_CONST_DIV / pll->csi2.lanes / l) |
| >> op_pix_ddr(pll->flags); |
| else |
| op_pll_bk->pix_clk_div = |
| (pll->bits_per_pixel |
| * (phy_const << op_sys_ddr(pll->flags)) |
| / PHY_CONST_DIV / l) >> op_pix_ddr(pll->flags); |
| |
| op_pll_bk->pix_clk_freq_hz = |
| (op_sys_clk_freq_hz_sdr >> op_pix_ddr(pll->flags)) |
| / op_pll_bk->pix_clk_div; |
| op_pll_bk->sys_clk_freq_hz = |
| op_sys_clk_freq_hz_sdr >> op_sys_ddr(pll->flags); |
| |
| dev_dbg(dev, "op_pix_clk_div: %u\n", op_pll_bk->pix_clk_div); |
| |
| return 0; |
| } |
| |
| int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, |
| struct ccs_pll *pll) |
| { |
| const struct ccs_pll_branch_limits_fr *op_lim_fr; |
| const struct ccs_pll_branch_limits_bk *op_lim_bk; |
| struct ccs_pll_branch_fr *op_pll_fr; |
| struct ccs_pll_branch_bk *op_pll_bk; |
| bool cphy = pll->bus_type == CCS_PLL_BUS_TYPE_CSI2_CPHY; |
| u32 phy_const = cphy ? CPHY_CONST : DPHY_CONST; |
| u32 op_sys_clk_freq_hz_sdr; |
| u16 min_op_pre_pll_clk_div; |
| u16 max_op_pre_pll_clk_div; |
| u32 mul, div; |
| u32 l = (!pll->op_bits_per_lane || |
| pll->op_bits_per_lane >= pll->bits_per_pixel) ? 1 : 2; |
| u32 i; |
| int rval = -EINVAL; |
| |
| if (!(pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL)) { |
| pll->op_lanes = 1; |
| pll->vt_lanes = 1; |
| } |
| |
| if (pll->flags & CCS_PLL_FLAG_DUAL_PLL) { |
| op_lim_fr = &lim->op_fr; |
| op_lim_bk = &lim->op_bk; |
| op_pll_fr = &pll->op_fr; |
| op_pll_bk = &pll->op_bk; |
| } else if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) { |
| /* |
| * If there's no OP PLL at all, use the VT values |
| * instead. The OP values are ignored for the rest of |
| * the PLL calculation. |
| */ |
| op_lim_fr = &lim->vt_fr; |
| op_lim_bk = &lim->vt_bk; |
| op_pll_fr = &pll->vt_fr; |
| op_pll_bk = &pll->vt_bk; |
| } else { |
| op_lim_fr = &lim->vt_fr; |
| op_lim_bk = &lim->op_bk; |
| op_pll_fr = &pll->vt_fr; |
| op_pll_bk = &pll->op_bk; |
| } |
| |
| if (!pll->op_lanes || !pll->vt_lanes || !pll->bits_per_pixel || |
| !pll->ext_clk_freq_hz || !pll->link_freq || !pll->scale_m || |
| !op_lim_fr->min_pll_ip_clk_freq_hz || |
| !op_lim_fr->max_pll_ip_clk_freq_hz || |
| !op_lim_fr->min_pll_op_clk_freq_hz || |
| !op_lim_fr->max_pll_op_clk_freq_hz || |
| !op_lim_bk->max_sys_clk_div || !op_lim_fr->max_pll_multiplier) |
| return -EINVAL; |
| |
| /* |
| * Make sure op_pix_clk_div will be integer --- unless flexible |
| * op_pix_clk_div is supported |
| */ |
| if (!(pll->flags & CCS_PLL_FLAG_FLEXIBLE_OP_PIX_CLK_DIV) && |
| (pll->bits_per_pixel * pll->op_lanes) % |
| (pll->csi2.lanes * l << op_pix_ddr(pll->flags))) { |
| dev_dbg(dev, "op_pix_clk_div not an integer (bpp %u, op lanes %u, lanes %u, l %u)\n", |
| pll->bits_per_pixel, pll->op_lanes, pll->csi2.lanes, l); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "vt_lanes: %u\n", pll->vt_lanes); |
| dev_dbg(dev, "op_lanes: %u\n", pll->op_lanes); |
| |
| dev_dbg(dev, "binning: %ux%u\n", pll->binning_horizontal, |
| pll->binning_vertical); |
| |
| switch (pll->bus_type) { |
| case CCS_PLL_BUS_TYPE_CSI2_DPHY: |
| case CCS_PLL_BUS_TYPE_CSI2_CPHY: |
| op_sys_clk_freq_hz_sdr = pll->link_freq * 2 |
| * (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ? |
| 1 : pll->csi2.lanes); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| pll->pixel_rate_csi = |
| div_u64((uint64_t)op_sys_clk_freq_hz_sdr |
| * (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ? |
| pll->csi2.lanes : 1) * PHY_CONST_DIV, |
| phy_const * pll->bits_per_pixel * l); |
| |
| /* Figure out limits for OP pre-pll divider based on extclk */ |
| dev_dbg(dev, "min / max op_pre_pll_clk_div: %u / %u\n", |
| op_lim_fr->min_pre_pll_clk_div, op_lim_fr->max_pre_pll_clk_div); |
| max_op_pre_pll_clk_div = |
| min_t(u16, op_lim_fr->max_pre_pll_clk_div, |
| clk_div_even(pll->ext_clk_freq_hz / |
| op_lim_fr->min_pll_ip_clk_freq_hz)); |
| min_op_pre_pll_clk_div = |
| max_t(u16, op_lim_fr->min_pre_pll_clk_div, |
| clk_div_even_up( |
| DIV_ROUND_UP(pll->ext_clk_freq_hz, |
| op_lim_fr->max_pll_ip_clk_freq_hz))); |
| dev_dbg(dev, "pre-pll check: min / max op_pre_pll_clk_div: %u / %u\n", |
| min_op_pre_pll_clk_div, max_op_pre_pll_clk_div); |
| |
| i = gcd(op_sys_clk_freq_hz_sdr, |
| pll->ext_clk_freq_hz << op_pix_ddr(pll->flags)); |
| mul = op_sys_clk_freq_hz_sdr / i; |
| div = (pll->ext_clk_freq_hz << op_pix_ddr(pll->flags)) / i; |
| dev_dbg(dev, "mul %u / div %u\n", mul, div); |
| |
| min_op_pre_pll_clk_div = |
| max_t(u16, min_op_pre_pll_clk_div, |
| clk_div_even_up( |
| mul / |
| one_or_more( |
| DIV_ROUND_UP(op_lim_fr->max_pll_op_clk_freq_hz, |
| pll->ext_clk_freq_hz)))); |
| dev_dbg(dev, "pll_op check: min / max op_pre_pll_clk_div: %u / %u\n", |
| min_op_pre_pll_clk_div, max_op_pre_pll_clk_div); |
| |
| for (op_pll_fr->pre_pll_clk_div = min_op_pre_pll_clk_div; |
| op_pll_fr->pre_pll_clk_div <= max_op_pre_pll_clk_div; |
| op_pll_fr->pre_pll_clk_div += |
| (pll->flags & CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER) ? 1 : |
| 2 - (op_pll_fr->pre_pll_clk_div & 1)) { |
| rval = ccs_pll_calculate_op(dev, lim, op_lim_fr, op_lim_bk, pll, |
| op_pll_fr, op_pll_bk, mul, div, |
| op_sys_clk_freq_hz_sdr, l, cphy, |
| phy_const); |
| if (rval) |
| continue; |
| |
| rval = check_fr_bounds(dev, lim, pll, |
| pll->flags & CCS_PLL_FLAG_DUAL_PLL ? |
| PLL_OP : PLL_VT); |
| if (rval) |
| continue; |
| |
| rval = check_bk_bounds(dev, lim, pll, PLL_OP); |
| if (rval) |
| continue; |
| |
| if (pll->flags & CCS_PLL_FLAG_DUAL_PLL) |
| break; |
| |
| ccs_pll_calculate_vt(dev, lim, op_lim_bk, pll, op_pll_fr, |
| op_pll_bk, cphy, phy_const); |
| |
| rval = check_bk_bounds(dev, lim, pll, PLL_VT); |
| if (rval) |
| continue; |
| rval = check_ext_bounds(dev, pll); |
| if (rval) |
| continue; |
| |
| break; |
| } |
| |
| if (rval) { |
| dev_dbg(dev, "unable to compute pre_pll divisor\n"); |
| |
| return rval; |
| } |
| |
| if (pll->flags & CCS_PLL_FLAG_DUAL_PLL) { |
| rval = ccs_pll_calculate_vt_tree(dev, lim, pll); |
| |
| if (rval) |
| return rval; |
| } |
| |
| print_pll(dev, pll); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ccs_pll_calculate); |
| |
| MODULE_AUTHOR("Sakari Ailus <sakari.ailus@linux.intel.com>"); |
| MODULE_DESCRIPTION("Generic MIPI CCS/SMIA/SMIA++ PLL calculator"); |
| MODULE_LICENSE("GPL"); |