| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> |
| */ |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| |
| #include "siox.h" |
| |
| /* |
| * The lowest bit in the SIOX status word signals if the in-device watchdog is |
| * ok. If the bit is set, the device is functional. |
| * |
| * On writing the watchdog timer is reset when this bit toggles. |
| */ |
| #define SIOX_STATUS_WDG 0x01 |
| |
| /* |
| * Bits 1 to 3 of the status word read as the bitwise negation of what was |
| * clocked in before. The value clocked in is changed in each cycle and so |
| * allows to detect transmit/receive problems. |
| */ |
| #define SIOX_STATUS_COUNTER 0x0e |
| |
| /* |
| * Each Siox-Device has a 4 bit type number that is neither 0 nor 15. This is |
| * available in the upper nibble of the read status. |
| * |
| * On write these bits are DC. |
| */ |
| #define SIOX_STATUS_TYPE 0xf0 |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/siox.h> |
| |
| static bool siox_is_registered; |
| |
| static void siox_master_lock(struct siox_master *smaster) |
| { |
| mutex_lock(&smaster->lock); |
| } |
| |
| static void siox_master_unlock(struct siox_master *smaster) |
| { |
| mutex_unlock(&smaster->lock); |
| } |
| |
| static inline u8 siox_status_clean(u8 status_read, u8 status_written) |
| { |
| /* |
| * bits 3:1 of status sample the respective bit in the status |
| * byte written in the previous cycle but inverted. So if you wrote the |
| * status word as 0xa before (counter = 0b101), it is expected to get |
| * back the counter bits as 0b010. |
| * |
| * So given the last status written this function toggles the there |
| * unset counter bits in the read value such that the counter bits in |
| * the return value are all zero iff the bits were read as expected to |
| * simplify error detection. |
| */ |
| |
| return status_read ^ (~status_written & 0xe); |
| } |
| |
| static bool siox_device_counter_error(struct siox_device *sdevice, |
| u8 status_clean) |
| { |
| return (status_clean & SIOX_STATUS_COUNTER) != 0; |
| } |
| |
| static bool siox_device_type_error(struct siox_device *sdevice, u8 status_clean) |
| { |
| u8 statustype = (status_clean & SIOX_STATUS_TYPE) >> 4; |
| |
| /* |
| * If the device knows which value the type bits should have, check |
| * against this value otherwise just rule out the invalid values 0b0000 |
| * and 0b1111. |
| */ |
| if (sdevice->statustype) { |
| if (statustype != sdevice->statustype) |
| return true; |
| } else { |
| switch (statustype) { |
| case 0: |
| case 0xf: |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static bool siox_device_wdg_error(struct siox_device *sdevice, u8 status_clean) |
| { |
| return (status_clean & SIOX_STATUS_WDG) == 0; |
| } |
| |
| /* |
| * If there is a type or counter error the device is called "unsynced". |
| */ |
| bool siox_device_synced(struct siox_device *sdevice) |
| { |
| if (siox_device_type_error(sdevice, sdevice->status_read_clean)) |
| return false; |
| |
| return !siox_device_counter_error(sdevice, sdevice->status_read_clean); |
| |
| } |
| EXPORT_SYMBOL_GPL(siox_device_synced); |
| |
| /* |
| * A device is called "connected" if it is synced and the watchdog is not |
| * asserted. |
| */ |
| bool siox_device_connected(struct siox_device *sdevice) |
| { |
| if (!siox_device_synced(sdevice)) |
| return false; |
| |
| return !siox_device_wdg_error(sdevice, sdevice->status_read_clean); |
| } |
| EXPORT_SYMBOL_GPL(siox_device_connected); |
| |
| static void siox_poll(struct siox_master *smaster) |
| { |
| struct siox_device *sdevice; |
| size_t i = smaster->setbuf_len; |
| unsigned int devno = 0; |
| int unsync_error = 0; |
| |
| smaster->last_poll = jiffies; |
| |
| /* |
| * The counter bits change in each second cycle, the watchdog bit |
| * toggles each time. |
| * The counter bits hold values from [0, 6]. 7 would be possible |
| * theoretically but the protocol designer considered that a bad idea |
| * for reasons unknown today. (Maybe that's because then the status read |
| * back has only zeros in the counter bits then which might be confused |
| * with a stuck-at-0 error. But for the same reason (with s/0/1/) 0 |
| * could be skipped.) |
| */ |
| if (++smaster->status > 0x0d) |
| smaster->status = 0; |
| |
| memset(smaster->buf, 0, smaster->setbuf_len); |
| |
| /* prepare data pushed out to devices in buf[0..setbuf_len) */ |
| list_for_each_entry(sdevice, &smaster->devices, node) { |
| struct siox_driver *sdriver = |
| to_siox_driver(sdevice->dev.driver); |
| sdevice->status_written = smaster->status; |
| |
| i -= sdevice->inbytes; |
| |
| /* |
| * If the device or a previous one is unsynced, don't pet the |
| * watchdog. This is done to ensure that the device is kept in |
| * reset when something is wrong. |
| */ |
| if (!siox_device_synced(sdevice)) |
| unsync_error = 1; |
| |
| if (sdriver && !unsync_error) |
| sdriver->set_data(sdevice, sdevice->status_written, |
| &smaster->buf[i + 1]); |
| else |
| /* |
| * Don't trigger watchdog if there is no driver or a |
| * sync problem |
| */ |
| sdevice->status_written &= ~SIOX_STATUS_WDG; |
| |
| smaster->buf[i] = sdevice->status_written; |
| |
| trace_siox_set_data(smaster, sdevice, devno, i); |
| |
| devno++; |
| } |
| |
| smaster->pushpull(smaster, smaster->setbuf_len, smaster->buf, |
| smaster->getbuf_len, |
| smaster->buf + smaster->setbuf_len); |
| |
| unsync_error = 0; |
| |
| /* interpret data pulled in from devices in buf[setbuf_len..] */ |
| devno = 0; |
| i = smaster->setbuf_len; |
| list_for_each_entry(sdevice, &smaster->devices, node) { |
| struct siox_driver *sdriver = |
| to_siox_driver(sdevice->dev.driver); |
| u8 status = smaster->buf[i + sdevice->outbytes - 1]; |
| u8 status_clean; |
| u8 prev_status_clean = sdevice->status_read_clean; |
| bool synced = true; |
| bool connected = true; |
| |
| if (!siox_device_synced(sdevice)) |
| unsync_error = 1; |
| |
| /* |
| * If the watchdog bit wasn't toggled in this cycle, report the |
| * watchdog as active to give a consistent view for drivers and |
| * sysfs consumers. |
| */ |
| if (!sdriver || unsync_error) |
| status &= ~SIOX_STATUS_WDG; |
| |
| status_clean = |
| siox_status_clean(status, |
| sdevice->status_written_lastcycle); |
| |
| /* Check counter and type bits */ |
| if (siox_device_counter_error(sdevice, status_clean) || |
| siox_device_type_error(sdevice, status_clean)) { |
| bool prev_error; |
| |
| synced = false; |
| |
| /* only report a new error if the last cycle was ok */ |
| prev_error = |
| siox_device_counter_error(sdevice, |
| prev_status_clean) || |
| siox_device_type_error(sdevice, |
| prev_status_clean); |
| |
| if (!prev_error) { |
| sdevice->status_errors++; |
| sysfs_notify_dirent(sdevice->status_errors_kn); |
| } |
| } |
| |
| /* If the device is unsynced report the watchdog as active */ |
| if (!synced) { |
| status &= ~SIOX_STATUS_WDG; |
| status_clean &= ~SIOX_STATUS_WDG; |
| } |
| |
| if (siox_device_wdg_error(sdevice, status_clean)) |
| connected = false; |
| |
| /* The watchdog state changed just now */ |
| if ((status_clean ^ prev_status_clean) & SIOX_STATUS_WDG) { |
| sysfs_notify_dirent(sdevice->watchdog_kn); |
| |
| if (siox_device_wdg_error(sdevice, status_clean)) { |
| struct kernfs_node *wd_errs = |
| sdevice->watchdog_errors_kn; |
| |
| sdevice->watchdog_errors++; |
| sysfs_notify_dirent(wd_errs); |
| } |
| } |
| |
| if (connected != sdevice->connected) |
| sysfs_notify_dirent(sdevice->connected_kn); |
| |
| sdevice->status_read_clean = status_clean; |
| sdevice->status_written_lastcycle = sdevice->status_written; |
| sdevice->connected = connected; |
| |
| trace_siox_get_data(smaster, sdevice, devno, status_clean, i); |
| |
| /* only give data read to driver if the device is connected */ |
| if (sdriver && connected) |
| sdriver->get_data(sdevice, &smaster->buf[i]); |
| |
| devno++; |
| i += sdevice->outbytes; |
| } |
| } |
| |
| static int siox_poll_thread(void *data) |
| { |
| struct siox_master *smaster = data; |
| signed long timeout = 0; |
| |
| get_device(&smaster->dev); |
| |
| for (;;) { |
| if (kthread_should_stop()) { |
| put_device(&smaster->dev); |
| return 0; |
| } |
| |
| siox_master_lock(smaster); |
| |
| if (smaster->active) { |
| unsigned long next_poll = |
| smaster->last_poll + smaster->poll_interval; |
| if (time_is_before_eq_jiffies(next_poll)) |
| siox_poll(smaster); |
| |
| timeout = smaster->poll_interval - |
| (jiffies - smaster->last_poll); |
| } else { |
| timeout = MAX_SCHEDULE_TIMEOUT; |
| } |
| |
| /* |
| * Set the task to idle while holding the lock. This makes sure |
| * that we don't sleep too long when the bus is reenabled before |
| * schedule_timeout is reached. |
| */ |
| if (timeout > 0) |
| set_current_state(TASK_IDLE); |
| |
| siox_master_unlock(smaster); |
| |
| if (timeout > 0) |
| schedule_timeout(timeout); |
| |
| /* |
| * I'm not clear if/why it is important to set the state to |
| * RUNNING again, but it fixes a "do not call blocking ops when |
| * !TASK_RUNNING;"-warning. |
| */ |
| set_current_state(TASK_RUNNING); |
| } |
| } |
| |
| static int __siox_start(struct siox_master *smaster) |
| { |
| if (!(smaster->setbuf_len + smaster->getbuf_len)) |
| return -ENODEV; |
| |
| if (!smaster->buf) |
| return -ENOMEM; |
| |
| if (smaster->active) |
| return 0; |
| |
| smaster->active = 1; |
| wake_up_process(smaster->poll_thread); |
| |
| return 1; |
| } |
| |
| static int siox_start(struct siox_master *smaster) |
| { |
| int ret; |
| |
| siox_master_lock(smaster); |
| ret = __siox_start(smaster); |
| siox_master_unlock(smaster); |
| |
| return ret; |
| } |
| |
| static int __siox_stop(struct siox_master *smaster) |
| { |
| if (smaster->active) { |
| struct siox_device *sdevice; |
| |
| smaster->active = 0; |
| |
| list_for_each_entry(sdevice, &smaster->devices, node) { |
| if (sdevice->connected) |
| sysfs_notify_dirent(sdevice->connected_kn); |
| sdevice->connected = false; |
| } |
| |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int siox_stop(struct siox_master *smaster) |
| { |
| int ret; |
| |
| siox_master_lock(smaster); |
| ret = __siox_stop(smaster); |
| siox_master_unlock(smaster); |
| |
| return ret; |
| } |
| |
| static ssize_t type_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_device *sdev = to_siox_device(dev); |
| |
| return sprintf(buf, "%s\n", sdev->type); |
| } |
| |
| static DEVICE_ATTR_RO(type); |
| |
| static ssize_t inbytes_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_device *sdev = to_siox_device(dev); |
| |
| return sprintf(buf, "%zu\n", sdev->inbytes); |
| } |
| |
| static DEVICE_ATTR_RO(inbytes); |
| |
| static ssize_t outbytes_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_device *sdev = to_siox_device(dev); |
| |
| return sprintf(buf, "%zu\n", sdev->outbytes); |
| } |
| |
| static DEVICE_ATTR_RO(outbytes); |
| |
| static ssize_t status_errors_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_device *sdev = to_siox_device(dev); |
| unsigned int status_errors; |
| |
| siox_master_lock(sdev->smaster); |
| |
| status_errors = sdev->status_errors; |
| |
| siox_master_unlock(sdev->smaster); |
| |
| return sprintf(buf, "%u\n", status_errors); |
| } |
| |
| static DEVICE_ATTR_RO(status_errors); |
| |
| static ssize_t connected_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_device *sdev = to_siox_device(dev); |
| bool connected; |
| |
| siox_master_lock(sdev->smaster); |
| |
| connected = sdev->connected; |
| |
| siox_master_unlock(sdev->smaster); |
| |
| return sprintf(buf, "%u\n", connected); |
| } |
| |
| static DEVICE_ATTR_RO(connected); |
| |
| static ssize_t watchdog_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_device *sdev = to_siox_device(dev); |
| u8 status; |
| |
| siox_master_lock(sdev->smaster); |
| |
| status = sdev->status_read_clean; |
| |
| siox_master_unlock(sdev->smaster); |
| |
| return sprintf(buf, "%d\n", status & SIOX_STATUS_WDG); |
| } |
| |
| static DEVICE_ATTR_RO(watchdog); |
| |
| static ssize_t watchdog_errors_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_device *sdev = to_siox_device(dev); |
| unsigned int watchdog_errors; |
| |
| siox_master_lock(sdev->smaster); |
| |
| watchdog_errors = sdev->watchdog_errors; |
| |
| siox_master_unlock(sdev->smaster); |
| |
| return sprintf(buf, "%u\n", watchdog_errors); |
| } |
| |
| static DEVICE_ATTR_RO(watchdog_errors); |
| |
| static struct attribute *siox_device_attrs[] = { |
| &dev_attr_type.attr, |
| &dev_attr_inbytes.attr, |
| &dev_attr_outbytes.attr, |
| &dev_attr_status_errors.attr, |
| &dev_attr_connected.attr, |
| &dev_attr_watchdog.attr, |
| &dev_attr_watchdog_errors.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(siox_device); |
| |
| static void siox_device_release(struct device *dev) |
| { |
| struct siox_device *sdevice = to_siox_device(dev); |
| |
| kfree(sdevice); |
| } |
| |
| static struct device_type siox_device_type = { |
| .groups = siox_device_groups, |
| .release = siox_device_release, |
| }; |
| |
| static int siox_match(struct device *dev, struct device_driver *drv) |
| { |
| if (dev->type != &siox_device_type) |
| return 0; |
| |
| /* up to now there is only a single driver so keeping this simple */ |
| return 1; |
| } |
| |
| static int siox_probe(struct device *dev) |
| { |
| struct siox_driver *sdriver = to_siox_driver(dev->driver); |
| struct siox_device *sdevice = to_siox_device(dev); |
| |
| return sdriver->probe(sdevice); |
| } |
| |
| static void siox_remove(struct device *dev) |
| { |
| struct siox_driver *sdriver = |
| container_of(dev->driver, struct siox_driver, driver); |
| struct siox_device *sdevice = to_siox_device(dev); |
| |
| if (sdriver->remove) |
| sdriver->remove(sdevice); |
| } |
| |
| static void siox_shutdown(struct device *dev) |
| { |
| struct siox_device *sdevice = to_siox_device(dev); |
| struct siox_driver *sdriver; |
| |
| if (!dev->driver) |
| return; |
| |
| sdriver = container_of(dev->driver, struct siox_driver, driver); |
| if (sdriver->shutdown) |
| sdriver->shutdown(sdevice); |
| } |
| |
| static struct bus_type siox_bus_type = { |
| .name = "siox", |
| .match = siox_match, |
| .probe = siox_probe, |
| .remove = siox_remove, |
| .shutdown = siox_shutdown, |
| }; |
| |
| static ssize_t active_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_master *smaster = to_siox_master(dev); |
| |
| return sprintf(buf, "%d\n", smaster->active); |
| } |
| |
| static ssize_t active_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct siox_master *smaster = to_siox_master(dev); |
| int ret; |
| int active; |
| |
| ret = kstrtoint(buf, 0, &active); |
| if (ret < 0) |
| return ret; |
| |
| if (active) |
| ret = siox_start(smaster); |
| else |
| ret = siox_stop(smaster); |
| |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(active); |
| |
| static struct siox_device *siox_device_add(struct siox_master *smaster, |
| const char *type, size_t inbytes, |
| size_t outbytes, u8 statustype); |
| |
| static ssize_t device_add_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct siox_master *smaster = to_siox_master(dev); |
| int ret; |
| char type[20] = ""; |
| size_t inbytes = 0, outbytes = 0; |
| u8 statustype = 0; |
| |
| ret = sscanf(buf, "%19s %zu %zu %hhu", type, &inbytes, |
| &outbytes, &statustype); |
| if (ret != 3 && ret != 4) |
| return -EINVAL; |
| |
| if (strcmp(type, "siox-12x8") || inbytes != 2 || outbytes != 4) |
| return -EINVAL; |
| |
| siox_device_add(smaster, "siox-12x8", inbytes, outbytes, statustype); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_WO(device_add); |
| |
| static void siox_device_remove(struct siox_master *smaster); |
| |
| static ssize_t device_remove_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct siox_master *smaster = to_siox_master(dev); |
| |
| /* XXX? require to write <type> <inbytes> <outbytes> */ |
| siox_device_remove(smaster); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_WO(device_remove); |
| |
| static ssize_t poll_interval_ns_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct siox_master *smaster = to_siox_master(dev); |
| |
| return sprintf(buf, "%lld\n", jiffies_to_nsecs(smaster->poll_interval)); |
| } |
| |
| static ssize_t poll_interval_ns_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct siox_master *smaster = to_siox_master(dev); |
| int ret; |
| u64 val; |
| |
| ret = kstrtou64(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| |
| siox_master_lock(smaster); |
| |
| smaster->poll_interval = nsecs_to_jiffies(val); |
| |
| siox_master_unlock(smaster); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(poll_interval_ns); |
| |
| static struct attribute *siox_master_attrs[] = { |
| &dev_attr_active.attr, |
| &dev_attr_device_add.attr, |
| &dev_attr_device_remove.attr, |
| &dev_attr_poll_interval_ns.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(siox_master); |
| |
| static void siox_master_release(struct device *dev) |
| { |
| struct siox_master *smaster = to_siox_master(dev); |
| |
| kfree(smaster); |
| } |
| |
| static struct device_type siox_master_type = { |
| .groups = siox_master_groups, |
| .release = siox_master_release, |
| }; |
| |
| struct siox_master *siox_master_alloc(struct device *dev, |
| size_t size) |
| { |
| struct siox_master *smaster; |
| |
| if (!dev) |
| return NULL; |
| |
| smaster = kzalloc(sizeof(*smaster) + size, GFP_KERNEL); |
| if (!smaster) |
| return NULL; |
| |
| device_initialize(&smaster->dev); |
| |
| smaster->busno = -1; |
| smaster->dev.bus = &siox_bus_type; |
| smaster->dev.type = &siox_master_type; |
| smaster->dev.parent = dev; |
| smaster->poll_interval = DIV_ROUND_UP(HZ, 40); |
| |
| dev_set_drvdata(&smaster->dev, &smaster[1]); |
| |
| return smaster; |
| } |
| EXPORT_SYMBOL_GPL(siox_master_alloc); |
| |
| int siox_master_register(struct siox_master *smaster) |
| { |
| int ret; |
| |
| if (!siox_is_registered) |
| return -EPROBE_DEFER; |
| |
| if (!smaster->pushpull) |
| return -EINVAL; |
| |
| dev_set_name(&smaster->dev, "siox-%d", smaster->busno); |
| |
| mutex_init(&smaster->lock); |
| INIT_LIST_HEAD(&smaster->devices); |
| |
| smaster->last_poll = jiffies; |
| smaster->poll_thread = kthread_run(siox_poll_thread, smaster, |
| "siox-%d", smaster->busno); |
| if (IS_ERR(smaster->poll_thread)) { |
| smaster->active = 0; |
| return PTR_ERR(smaster->poll_thread); |
| } |
| |
| ret = device_add(&smaster->dev); |
| if (ret) |
| kthread_stop(smaster->poll_thread); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(siox_master_register); |
| |
| void siox_master_unregister(struct siox_master *smaster) |
| { |
| /* remove device */ |
| device_del(&smaster->dev); |
| |
| siox_master_lock(smaster); |
| |
| __siox_stop(smaster); |
| |
| while (smaster->num_devices) { |
| struct siox_device *sdevice; |
| |
| sdevice = container_of(smaster->devices.prev, |
| struct siox_device, node); |
| list_del(&sdevice->node); |
| smaster->num_devices--; |
| |
| siox_master_unlock(smaster); |
| |
| device_unregister(&sdevice->dev); |
| |
| siox_master_lock(smaster); |
| } |
| |
| siox_master_unlock(smaster); |
| |
| put_device(&smaster->dev); |
| } |
| EXPORT_SYMBOL_GPL(siox_master_unregister); |
| |
| static struct siox_device *siox_device_add(struct siox_master *smaster, |
| const char *type, size_t inbytes, |
| size_t outbytes, u8 statustype) |
| { |
| struct siox_device *sdevice; |
| int ret; |
| size_t buf_len; |
| |
| sdevice = kzalloc(sizeof(*sdevice), GFP_KERNEL); |
| if (!sdevice) |
| return ERR_PTR(-ENOMEM); |
| |
| sdevice->type = type; |
| sdevice->inbytes = inbytes; |
| sdevice->outbytes = outbytes; |
| sdevice->statustype = statustype; |
| |
| sdevice->smaster = smaster; |
| sdevice->dev.parent = &smaster->dev; |
| sdevice->dev.bus = &siox_bus_type; |
| sdevice->dev.type = &siox_device_type; |
| |
| siox_master_lock(smaster); |
| |
| dev_set_name(&sdevice->dev, "siox-%d-%d", |
| smaster->busno, smaster->num_devices); |
| |
| buf_len = smaster->setbuf_len + inbytes + |
| smaster->getbuf_len + outbytes; |
| if (smaster->buf_len < buf_len) { |
| u8 *buf = krealloc(smaster->buf, buf_len, GFP_KERNEL); |
| |
| if (!buf) { |
| dev_err(&smaster->dev, |
| "failed to realloc buffer to %zu\n", buf_len); |
| ret = -ENOMEM; |
| goto err_buf_alloc; |
| } |
| |
| smaster->buf_len = buf_len; |
| smaster->buf = buf; |
| } |
| |
| ret = device_register(&sdevice->dev); |
| if (ret) { |
| dev_err(&smaster->dev, "failed to register device: %d\n", ret); |
| |
| goto err_device_register; |
| } |
| |
| smaster->num_devices++; |
| list_add_tail(&sdevice->node, &smaster->devices); |
| |
| smaster->setbuf_len += sdevice->inbytes; |
| smaster->getbuf_len += sdevice->outbytes; |
| |
| sdevice->status_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, |
| "status_errors"); |
| sdevice->watchdog_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, |
| "watchdog"); |
| sdevice->watchdog_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, |
| "watchdog_errors"); |
| sdevice->connected_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, |
| "connected"); |
| |
| siox_master_unlock(smaster); |
| |
| return sdevice; |
| |
| err_device_register: |
| /* don't care to make the buffer smaller again */ |
| |
| err_buf_alloc: |
| siox_master_unlock(smaster); |
| |
| kfree(sdevice); |
| |
| return ERR_PTR(ret); |
| } |
| |
| static void siox_device_remove(struct siox_master *smaster) |
| { |
| struct siox_device *sdevice; |
| |
| siox_master_lock(smaster); |
| |
| if (!smaster->num_devices) { |
| siox_master_unlock(smaster); |
| return; |
| } |
| |
| sdevice = container_of(smaster->devices.prev, struct siox_device, node); |
| list_del(&sdevice->node); |
| smaster->num_devices--; |
| |
| smaster->setbuf_len -= sdevice->inbytes; |
| smaster->getbuf_len -= sdevice->outbytes; |
| |
| if (!smaster->num_devices) |
| __siox_stop(smaster); |
| |
| siox_master_unlock(smaster); |
| |
| /* |
| * This must be done without holding the master lock because we're |
| * called from device_remove_store which also holds a sysfs mutex. |
| * device_unregister tries to aquire the same lock. |
| */ |
| device_unregister(&sdevice->dev); |
| } |
| |
| int __siox_driver_register(struct siox_driver *sdriver, struct module *owner) |
| { |
| int ret; |
| |
| if (unlikely(!siox_is_registered)) |
| return -EPROBE_DEFER; |
| |
| if (!sdriver->probe || |
| (!sdriver->set_data && !sdriver->get_data)) { |
| pr_err("Driver %s doesn't provide needed callbacks\n", |
| sdriver->driver.name); |
| return -EINVAL; |
| } |
| |
| sdriver->driver.owner = owner; |
| sdriver->driver.bus = &siox_bus_type; |
| |
| ret = driver_register(&sdriver->driver); |
| if (ret) |
| pr_err("Failed to register siox driver %s (%d)\n", |
| sdriver->driver.name, ret); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(__siox_driver_register); |
| |
| static int __init siox_init(void) |
| { |
| int ret; |
| |
| ret = bus_register(&siox_bus_type); |
| if (ret) { |
| pr_err("Registration of SIOX bus type failed: %d\n", ret); |
| return ret; |
| } |
| |
| siox_is_registered = true; |
| |
| return 0; |
| } |
| subsys_initcall(siox_init); |
| |
| static void __exit siox_exit(void) |
| { |
| bus_unregister(&siox_bus_type); |
| } |
| module_exit(siox_exit); |
| |
| MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); |
| MODULE_DESCRIPTION("Eckelmann SIOX driver core"); |
| MODULE_LICENSE("GPL v2"); |