| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * fpu.c - save/restore of Floating Point Unit Registers on task switch |
| * |
| * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) |
| */ |
| |
| #include <linux/sched.h> |
| #include <asm/fpu.h> |
| |
| #ifdef CONFIG_ISA_ARCOMPACT |
| |
| /* |
| * To save/restore FPU regs, simplest scheme would use LR/SR insns. |
| * However since SR serializes the pipeline, an alternate "hack" can be used |
| * which uses the FPU Exchange insn (DEXCL) to r/w FPU regs. |
| * |
| * Store to 64bit dpfp1 reg from a pair of core regs: |
| * dexcl1 0, r1, r0 ; where r1:r0 is the 64 bit val |
| * |
| * Read from dpfp1 into pair of core regs (w/o clobbering dpfp1) |
| * mov_s r3, 0 |
| * daddh11 r1, r3, r3 ; get "hi" into r1 (dpfp1 unchanged) |
| * dexcl1 r0, r1, r3 ; get "low" into r0 (dpfp1 low clobbered) |
| * dexcl1 0, r1, r0 ; restore dpfp1 to orig value |
| * |
| * However we can tweak the read, so that read-out of outgoing task's FPU regs |
| * and write of incoming task's regs happen in one shot. So all the work is |
| * done before context switch |
| */ |
| |
| void fpu_save_restore(struct task_struct *prev, struct task_struct *next) |
| { |
| unsigned int *saveto = &prev->thread.fpu.aux_dpfp[0].l; |
| unsigned int *readfrom = &next->thread.fpu.aux_dpfp[0].l; |
| |
| const unsigned int zero = 0; |
| |
| __asm__ __volatile__( |
| "daddh11 %0, %2, %2\n" |
| "dexcl1 %1, %3, %4\n" |
| : "=&r" (*(saveto + 1)), /* early clobber must here */ |
| "=&r" (*(saveto)) |
| : "r" (zero), "r" (*(readfrom + 1)), "r" (*(readfrom)) |
| ); |
| |
| __asm__ __volatile__( |
| "daddh22 %0, %2, %2\n" |
| "dexcl2 %1, %3, %4\n" |
| : "=&r"(*(saveto + 3)), /* early clobber must here */ |
| "=&r"(*(saveto + 2)) |
| : "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2)) |
| ); |
| } |
| |
| #else |
| |
| void fpu_init_task(struct pt_regs *regs) |
| { |
| const unsigned int fwe = 0x80000000; |
| |
| /* default rounding mode */ |
| write_aux_reg(ARC_REG_FPU_CTRL, 0x100); |
| |
| /* Initialize to zero: setting requires FWE be set */ |
| write_aux_reg(ARC_REG_FPU_STATUS, fwe); |
| } |
| |
| void fpu_save_restore(struct task_struct *prev, struct task_struct *next) |
| { |
| struct arc_fpu *save = &prev->thread.fpu; |
| struct arc_fpu *restore = &next->thread.fpu; |
| const unsigned int fwe = 0x80000000; |
| |
| save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL); |
| save->status = read_aux_reg(ARC_REG_FPU_STATUS); |
| |
| write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl); |
| write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status)); |
| } |
| |
| #endif |