| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * OMAP and TWL PMIC specific initializations. |
| * |
| * Copyright (C) 2010 Texas Instruments Incorporated. |
| * Thara Gopinath |
| * Copyright (C) 2009 Texas Instruments Incorporated. |
| * Nishanth Menon |
| * Copyright (C) 2009 Nokia Corporation |
| * Paul Walmsley |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/twl.h> |
| |
| #include "soc.h" |
| #include "voltage.h" |
| |
| #include "pm.h" |
| |
| #define OMAP3_SRI2C_SLAVE_ADDR 0x12 |
| #define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00 |
| #define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01 |
| #define OMAP3_VP_CONFIG_ERROROFFSET 0x00 |
| #define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1 |
| #define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04 |
| #define OMAP3_VP_VLIMITTO_TIMEOUT_US 200 |
| |
| #define OMAP4_SRI2C_SLAVE_ADDR 0x12 |
| #define OMAP4_VDD_MPU_SR_VOLT_REG 0x55 |
| #define OMAP4_VDD_MPU_SR_CMD_REG 0x56 |
| #define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B |
| #define OMAP4_VDD_IVA_SR_CMD_REG 0x5C |
| #define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 |
| #define OMAP4_VDD_CORE_SR_CMD_REG 0x62 |
| |
| static bool is_offset_valid; |
| static u8 smps_offset; |
| |
| #define REG_SMPS_OFFSET 0xE0 |
| |
| static unsigned long twl4030_vsel_to_uv(const u8 vsel) |
| { |
| return (((vsel * 125) + 6000)) * 100; |
| } |
| |
| static u8 twl4030_uv_to_vsel(unsigned long uv) |
| { |
| return DIV_ROUND_UP(uv - 600000, 12500); |
| } |
| |
| static unsigned long twl6030_vsel_to_uv(const u8 vsel) |
| { |
| /* |
| * In TWL6030 depending on the value of SMPS_OFFSET |
| * efuse register the voltage range supported in |
| * standard mode can be either between 0.6V - 1.3V or |
| * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse |
| * is programmed to all 0's where as starting from |
| * TWL6030 ES1.1 the efuse is programmed to 1 |
| */ |
| if (!is_offset_valid) { |
| twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset, |
| REG_SMPS_OFFSET); |
| is_offset_valid = true; |
| } |
| |
| if (!vsel) |
| return 0; |
| /* |
| * There is no specific formula for voltage to vsel |
| * conversion above 1.3V. There are special hardcoded |
| * values for voltages above 1.3V. Currently we are |
| * hardcoding only for 1.35 V which is used for 1GH OPP for |
| * OMAP4430. |
| */ |
| if (vsel == 0x3A) |
| return 1350000; |
| |
| if (smps_offset & 0x8) |
| return ((((vsel - 1) * 1266) + 70900)) * 10; |
| else |
| return ((((vsel - 1) * 1266) + 60770)) * 10; |
| } |
| |
| static u8 twl6030_uv_to_vsel(unsigned long uv) |
| { |
| /* |
| * In TWL6030 depending on the value of SMPS_OFFSET |
| * efuse register the voltage range supported in |
| * standard mode can be either between 0.6V - 1.3V or |
| * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse |
| * is programmed to all 0's where as starting from |
| * TWL6030 ES1.1 the efuse is programmed to 1 |
| */ |
| if (!is_offset_valid) { |
| twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset, |
| REG_SMPS_OFFSET); |
| is_offset_valid = true; |
| } |
| |
| if (!uv) |
| return 0x00; |
| /* |
| * There is no specific formula for voltage to vsel |
| * conversion above 1.3V. There are special hardcoded |
| * values for voltages above 1.3V. Currently we are |
| * hardcoding only for 1.35 V which is used for 1GH OPP for |
| * OMAP4430. |
| */ |
| if (uv > twl6030_vsel_to_uv(0x39)) { |
| if (uv == 1350000) |
| return 0x3A; |
| pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n", |
| __func__, uv, twl6030_vsel_to_uv(0x39)); |
| return 0x3A; |
| } |
| |
| if (smps_offset & 0x8) |
| return DIV_ROUND_UP(uv - 709000, 12660) + 1; |
| else |
| return DIV_ROUND_UP(uv - 607700, 12660) + 1; |
| } |
| |
| static struct omap_voltdm_pmic omap3_mpu_pmic = { |
| .slew_rate = 4000, |
| .step_size = 12500, |
| .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 600000, |
| .vddmax = 1450000, |
| .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, |
| .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, |
| .i2c_high_speed = true, |
| .vsel_to_uv = twl4030_vsel_to_uv, |
| .uv_to_vsel = twl4030_uv_to_vsel, |
| }; |
| |
| static struct omap_voltdm_pmic omap3_core_pmic = { |
| .slew_rate = 4000, |
| .step_size = 12500, |
| .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 600000, |
| .vddmax = 1450000, |
| .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, |
| .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, |
| .i2c_high_speed = true, |
| .vsel_to_uv = twl4030_vsel_to_uv, |
| .uv_to_vsel = twl4030_uv_to_vsel, |
| }; |
| |
| static struct omap_voltdm_pmic omap4_mpu_pmic = { |
| .slew_rate = 4000, |
| .step_size = 12660, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 0, |
| .vddmax = 2100000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, |
| .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, |
| .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG, |
| .i2c_high_speed = true, |
| .i2c_pad_load = 3, |
| .vsel_to_uv = twl6030_vsel_to_uv, |
| .uv_to_vsel = twl6030_uv_to_vsel, |
| }; |
| |
| static struct omap_voltdm_pmic omap4_iva_pmic = { |
| .slew_rate = 4000, |
| .step_size = 12660, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 0, |
| .vddmax = 2100000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, |
| .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, |
| .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG, |
| .i2c_high_speed = true, |
| .i2c_pad_load = 3, |
| .vsel_to_uv = twl6030_vsel_to_uv, |
| .uv_to_vsel = twl6030_uv_to_vsel, |
| }; |
| |
| static struct omap_voltdm_pmic omap4_core_pmic = { |
| .slew_rate = 4000, |
| .step_size = 12660, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 0, |
| .vddmax = 2100000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, |
| .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, |
| .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG, |
| .i2c_high_speed = true, |
| .i2c_pad_load = 3, |
| .vsel_to_uv = twl6030_vsel_to_uv, |
| .uv_to_vsel = twl6030_uv_to_vsel, |
| }; |
| |
| int __init omap4_twl_init(void) |
| { |
| struct voltagedomain *voltdm; |
| |
| if (!cpu_is_omap44xx() || |
| of_find_compatible_node(NULL, NULL, "motorola,cpcap")) |
| return -ENODEV; |
| |
| voltdm = voltdm_lookup("mpu"); |
| omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic); |
| |
| voltdm = voltdm_lookup("iva"); |
| omap_voltage_register_pmic(voltdm, &omap4_iva_pmic); |
| |
| voltdm = voltdm_lookup("core"); |
| omap_voltage_register_pmic(voltdm, &omap4_core_pmic); |
| |
| return 0; |
| } |
| |
| int __init omap3_twl_init(void) |
| { |
| struct voltagedomain *voltdm; |
| |
| if (!cpu_is_omap34xx()) |
| return -ENODEV; |
| |
| voltdm = voltdm_lookup("mpu_iva"); |
| omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic); |
| |
| voltdm = voltdm_lookup("core"); |
| omap_voltage_register_pmic(voltdm, &omap3_core_pmic); |
| |
| return 0; |
| } |
