| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/arch/arm/mach-pxa/palmtc.c |
| * |
| * Support for the Palm Tungsten|C |
| * |
| * Author: Marek Vasut <marek.vasut@gmail.com> |
| * |
| * Based on work of: |
| * Petr Blaha <p3t3@centrum.cz> |
| * Chetan S. Kumar <shivakumar.chetan@gmail.com> |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/input.h> |
| #include <linux/pwm.h> |
| #include <linux/pwm_backlight.h> |
| #include <linux/gpio/machine.h> |
| #include <linux/input/matrix_keypad.h> |
| #include <linux/ucb1400.h> |
| #include <linux/power_supply.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/mtd/physmap.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include "pxa25x.h" |
| #include <mach/audio.h> |
| #include <mach/palmtc.h> |
| #include <linux/platform_data/mmc-pxamci.h> |
| #include <linux/platform_data/video-pxafb.h> |
| #include <linux/platform_data/irda-pxaficp.h> |
| #include "udc.h" |
| |
| #include "generic.h" |
| #include "devices.h" |
| |
| /****************************************************************************** |
| * Pin configuration |
| ******************************************************************************/ |
| static unsigned long palmtc_pin_config[] __initdata = { |
| /* MMC */ |
| GPIO6_MMC_CLK, |
| GPIO8_MMC_CS0, |
| GPIO12_GPIO, /* detect */ |
| GPIO32_GPIO, /* power */ |
| GPIO54_GPIO, /* r/o switch */ |
| |
| /* PCMCIA */ |
| GPIO52_nPCE_1, |
| GPIO53_nPCE_2, |
| GPIO50_nPIOR, |
| GPIO51_nPIOW, |
| GPIO49_nPWE, |
| GPIO48_nPOE, |
| GPIO52_nPCE_1, |
| GPIO53_nPCE_2, |
| GPIO57_nIOIS16, |
| GPIO56_nPWAIT, |
| |
| /* AC97 */ |
| GPIO28_AC97_BITCLK, |
| GPIO29_AC97_SDATA_IN_0, |
| GPIO30_AC97_SDATA_OUT, |
| GPIO31_AC97_SYNC, |
| |
| /* IrDA */ |
| GPIO45_GPIO, /* ir disable */ |
| GPIO46_FICP_RXD, |
| GPIO47_FICP_TXD, |
| |
| /* PWM */ |
| GPIO17_PWM1_OUT, |
| |
| /* USB */ |
| GPIO4_GPIO, /* detect */ |
| GPIO36_GPIO, /* pullup */ |
| |
| /* LCD */ |
| GPIOxx_LCD_TFT_16BPP, |
| |
| /* MATRIX KEYPAD */ |
| GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */ |
| GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 1 */ |
| GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 2 */ |
| GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 3 */ |
| GPIO18_GPIO | MFP_LPM_DRIVE_LOW, /* out 0 */ |
| GPIO19_GPIO | MFP_LPM_DRIVE_LOW, /* out 1 */ |
| GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* out 2 */ |
| GPIO21_GPIO | MFP_LPM_DRIVE_LOW, /* out 3 */ |
| GPIO22_GPIO | MFP_LPM_DRIVE_LOW, /* out 4 */ |
| GPIO23_GPIO | MFP_LPM_DRIVE_LOW, /* out 5 */ |
| GPIO24_GPIO | MFP_LPM_DRIVE_LOW, /* out 6 */ |
| GPIO25_GPIO | MFP_LPM_DRIVE_LOW, /* out 7 */ |
| GPIO26_GPIO | MFP_LPM_DRIVE_LOW, /* out 8 */ |
| GPIO27_GPIO | MFP_LPM_DRIVE_LOW, /* out 9 */ |
| GPIO79_GPIO | MFP_LPM_DRIVE_LOW, /* out 10 */ |
| GPIO80_GPIO | MFP_LPM_DRIVE_LOW, /* out 11 */ |
| |
| /* PXA GPIO KEYS */ |
| GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH, /* hotsync button on cradle */ |
| |
| /* MISC */ |
| GPIO1_RST, /* reset */ |
| GPIO2_GPIO, /* earphone detect */ |
| GPIO16_GPIO, /* backlight switch */ |
| }; |
| |
| /****************************************************************************** |
| * SD/MMC card controller |
| ******************************************************************************/ |
| #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) |
| static struct pxamci_platform_data palmtc_mci_platform_data = { |
| .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .detect_delay_ms = 200, |
| }; |
| |
| static struct gpiod_lookup_table palmtc_mci_gpio_table = { |
| .dev_id = "pxa2xx-mci.0", |
| .table = { |
| GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_DETECT_N, |
| "cd", GPIO_ACTIVE_LOW), |
| GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY, |
| "wp", GPIO_ACTIVE_LOW), |
| GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_POWER, |
| "power", GPIO_ACTIVE_HIGH), |
| { }, |
| }, |
| }; |
| |
| static void __init palmtc_mmc_init(void) |
| { |
| gpiod_add_lookup_table(&palmtc_mci_gpio_table); |
| pxa_set_mci_info(&palmtc_mci_platform_data); |
| } |
| #else |
| static inline void palmtc_mmc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * GPIO keys |
| ******************************************************************************/ |
| #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
| static struct gpio_keys_button palmtc_pxa_buttons[] = { |
| {KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1}, |
| }; |
| |
| static struct gpio_keys_platform_data palmtc_pxa_keys_data = { |
| .buttons = palmtc_pxa_buttons, |
| .nbuttons = ARRAY_SIZE(palmtc_pxa_buttons), |
| }; |
| |
| static struct platform_device palmtc_pxa_keys = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &palmtc_pxa_keys_data, |
| }, |
| }; |
| |
| static void __init palmtc_keys_init(void) |
| { |
| platform_device_register(&palmtc_pxa_keys); |
| } |
| #else |
| static inline void palmtc_keys_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Backlight |
| ******************************************************************************/ |
| #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) |
| |
| static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = { |
| .dev_id = "pwm-backlight.0", |
| .table = { |
| GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER, |
| "enable", GPIO_ACTIVE_HIGH), |
| }, |
| }; |
| |
| static struct pwm_lookup palmtc_pwm_lookup[] = { |
| PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS, |
| PWM_POLARITY_NORMAL), |
| }; |
| |
| static struct platform_pwm_backlight_data palmtc_backlight_data = { |
| .max_brightness = PALMTC_MAX_INTENSITY, |
| .dft_brightness = PALMTC_MAX_INTENSITY, |
| }; |
| |
| static struct platform_device palmtc_backlight = { |
| .name = "pwm-backlight", |
| .dev = { |
| .parent = &pxa25x_device_pwm1.dev, |
| .platform_data = &palmtc_backlight_data, |
| }, |
| }; |
| |
| static void __init palmtc_pwm_init(void) |
| { |
| gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table); |
| pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup)); |
| platform_device_register(&palmtc_backlight); |
| } |
| #else |
| static inline void palmtc_pwm_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * IrDA |
| ******************************************************************************/ |
| #if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) |
| static struct pxaficp_platform_data palmtc_ficp_platform_data = { |
| .gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE, |
| .transceiver_cap = IR_SIRMODE | IR_OFF, |
| }; |
| |
| static void __init palmtc_irda_init(void) |
| { |
| pxa_set_ficp_info(&palmtc_ficp_platform_data); |
| } |
| #else |
| static inline void palmtc_irda_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Keyboard |
| ******************************************************************************/ |
| #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) |
| static const uint32_t palmtc_matrix_keys[] = { |
| KEY(0, 0, KEY_F1), |
| KEY(0, 1, KEY_X), |
| KEY(0, 2, KEY_POWER), |
| KEY(0, 3, KEY_TAB), |
| KEY(0, 4, KEY_A), |
| KEY(0, 5, KEY_Q), |
| KEY(0, 6, KEY_LEFTSHIFT), |
| KEY(0, 7, KEY_Z), |
| KEY(0, 8, KEY_S), |
| KEY(0, 9, KEY_W), |
| KEY(0, 10, KEY_E), |
| KEY(0, 11, KEY_UP), |
| |
| KEY(1, 0, KEY_F2), |
| KEY(1, 1, KEY_DOWN), |
| KEY(1, 3, KEY_D), |
| KEY(1, 4, KEY_C), |
| KEY(1, 5, KEY_F), |
| KEY(1, 6, KEY_R), |
| KEY(1, 7, KEY_SPACE), |
| KEY(1, 8, KEY_V), |
| KEY(1, 9, KEY_G), |
| KEY(1, 10, KEY_T), |
| KEY(1, 11, KEY_LEFT), |
| |
| KEY(2, 0, KEY_F3), |
| KEY(2, 1, KEY_LEFTCTRL), |
| KEY(2, 3, KEY_H), |
| KEY(2, 4, KEY_Y), |
| KEY(2, 5, KEY_N), |
| KEY(2, 6, KEY_J), |
| KEY(2, 7, KEY_U), |
| KEY(2, 8, KEY_M), |
| KEY(2, 9, KEY_K), |
| KEY(2, 10, KEY_I), |
| KEY(2, 11, KEY_RIGHT), |
| |
| KEY(3, 0, KEY_F4), |
| KEY(3, 1, KEY_ENTER), |
| KEY(3, 3, KEY_DOT), |
| KEY(3, 4, KEY_L), |
| KEY(3, 5, KEY_O), |
| KEY(3, 6, KEY_LEFTALT), |
| KEY(3, 7, KEY_ENTER), |
| KEY(3, 8, KEY_BACKSPACE), |
| KEY(3, 9, KEY_P), |
| KEY(3, 10, KEY_B), |
| KEY(3, 11, KEY_FN), |
| }; |
| |
| const struct matrix_keymap_data palmtc_keymap_data = { |
| .keymap = palmtc_matrix_keys, |
| .keymap_size = ARRAY_SIZE(palmtc_matrix_keys), |
| }; |
| |
| static const unsigned int palmtc_keypad_row_gpios[] = { |
| 0, 9, 10, 11 |
| }; |
| |
| static const unsigned int palmtc_keypad_col_gpios[] = { |
| 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80 |
| }; |
| |
| static struct matrix_keypad_platform_data palmtc_keypad_platform_data = { |
| .keymap_data = &palmtc_keymap_data, |
| .row_gpios = palmtc_keypad_row_gpios, |
| .num_row_gpios = ARRAY_SIZE(palmtc_keypad_row_gpios), |
| .col_gpios = palmtc_keypad_col_gpios, |
| .num_col_gpios = ARRAY_SIZE(palmtc_keypad_col_gpios), |
| .active_low = 1, |
| |
| .debounce_ms = 20, |
| .col_scan_delay_us = 5, |
| }; |
| |
| static struct platform_device palmtc_keyboard = { |
| .name = "matrix-keypad", |
| .id = -1, |
| .dev = { |
| .platform_data = &palmtc_keypad_platform_data, |
| }, |
| }; |
| static void __init palmtc_mkp_init(void) |
| { |
| platform_device_register(&palmtc_keyboard); |
| } |
| #else |
| static inline void palmtc_mkp_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * UDC |
| ******************************************************************************/ |
| #if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE) |
| static struct gpiod_lookup_table palmtc_udc_gpiod_table = { |
| .dev_id = "gpio-vbus", |
| .table = { |
| GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N, |
| "vbus", GPIO_ACTIVE_LOW), |
| GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER, |
| "pullup", GPIO_ACTIVE_HIGH), |
| { }, |
| }, |
| }; |
| |
| static struct platform_device palmtc_gpio_vbus = { |
| .name = "gpio-vbus", |
| .id = -1, |
| }; |
| |
| static void __init palmtc_udc_init(void) |
| { |
| gpiod_add_lookup_table(&palmtc_udc_gpiod_table); |
| platform_device_register(&palmtc_gpio_vbus); |
| }; |
| #else |
| static inline void palmtc_udc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Touchscreen / Battery / GPIO-extender |
| ******************************************************************************/ |
| #if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ |
| defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) |
| static struct platform_device palmtc_ucb1400_device = { |
| .name = "ucb1400_core", |
| .id = -1, |
| }; |
| |
| static void __init palmtc_ts_init(void) |
| { |
| pxa_set_ac97_info(NULL); |
| platform_device_register(&palmtc_ucb1400_device); |
| } |
| #else |
| static inline void palmtc_ts_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * LEDs |
| ******************************************************************************/ |
| #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
| struct gpio_led palmtc_gpio_leds[] = { |
| { |
| .name = "palmtc:green:user", |
| .default_trigger = "none", |
| .gpio = GPIO_NR_PALMTC_LED_POWER, |
| .active_low = 1, |
| }, { |
| .name = "palmtc:vibra:vibra", |
| .default_trigger = "none", |
| .gpio = GPIO_NR_PALMTC_VIBRA_POWER, |
| .active_low = 1, |
| } |
| |
| }; |
| |
| static struct gpio_led_platform_data palmtc_gpio_led_info = { |
| .leds = palmtc_gpio_leds, |
| .num_leds = ARRAY_SIZE(palmtc_gpio_leds), |
| }; |
| |
| static struct platform_device palmtc_leds = { |
| .name = "leds-gpio", |
| .id = -1, |
| .dev = { |
| .platform_data = &palmtc_gpio_led_info, |
| } |
| }; |
| |
| static void __init palmtc_leds_init(void) |
| { |
| platform_device_register(&palmtc_leds); |
| } |
| #else |
| static inline void palmtc_leds_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * NOR Flash |
| ******************************************************************************/ |
| #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
| static struct resource palmtc_flash_resource = { |
| .start = PXA_CS0_PHYS, |
| .end = PXA_CS0_PHYS + SZ_16M - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct mtd_partition palmtc_flash_parts[] = { |
| { |
| .name = "U-Boot Bootloader", |
| .offset = 0x0, |
| .size = 0x40000, |
| }, |
| { |
| .name = "Linux Kernel", |
| .offset = 0x40000, |
| .size = 0x2c0000, |
| }, |
| { |
| .name = "Filesystem", |
| .offset = 0x300000, |
| .size = 0xcc0000, |
| }, |
| { |
| .name = "U-Boot Environment", |
| .offset = 0xfc0000, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct physmap_flash_data palmtc_flash_data = { |
| .width = 4, |
| .parts = palmtc_flash_parts, |
| .nr_parts = ARRAY_SIZE(palmtc_flash_parts), |
| }; |
| |
| static struct platform_device palmtc_flash = { |
| .name = "physmap-flash", |
| .id = -1, |
| .resource = &palmtc_flash_resource, |
| .num_resources = 1, |
| .dev = { |
| .platform_data = &palmtc_flash_data, |
| }, |
| }; |
| |
| static void __init palmtc_nor_init(void) |
| { |
| platform_device_register(&palmtc_flash); |
| } |
| #else |
| static inline void palmtc_nor_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Framebuffer |
| ******************************************************************************/ |
| #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) |
| static struct pxafb_mode_info palmtc_lcd_modes[] = { |
| { |
| .pixclock = 115384, |
| .xres = 320, |
| .yres = 320, |
| .bpp = 16, |
| |
| .left_margin = 27, |
| .right_margin = 7, |
| .upper_margin = 7, |
| .lower_margin = 8, |
| |
| .hsync_len = 6, |
| .vsync_len = 1, |
| }, |
| }; |
| |
| static struct pxafb_mach_info palmtc_lcd_screen = { |
| .modes = palmtc_lcd_modes, |
| .num_modes = ARRAY_SIZE(palmtc_lcd_modes), |
| .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, |
| }; |
| |
| static void __init palmtc_lcd_init(void) |
| { |
| pxa_set_fb_info(NULL, &palmtc_lcd_screen); |
| } |
| #else |
| static inline void palmtc_lcd_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * Machine init |
| ******************************************************************************/ |
| static void __init palmtc_init(void) |
| { |
| pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config)); |
| |
| pxa_set_ffuart_info(NULL); |
| pxa_set_btuart_info(NULL); |
| pxa_set_stuart_info(NULL); |
| pxa_set_hwuart_info(NULL); |
| |
| palmtc_mmc_init(); |
| palmtc_keys_init(); |
| palmtc_pwm_init(); |
| palmtc_irda_init(); |
| palmtc_mkp_init(); |
| palmtc_udc_init(); |
| palmtc_ts_init(); |
| palmtc_nor_init(); |
| palmtc_lcd_init(); |
| palmtc_leds_init(); |
| }; |
| |
| MACHINE_START(PALMTC, "Palm Tungsten|C") |
| .atag_offset = 0x100, |
| .map_io = pxa25x_map_io, |
| .nr_irqs = PXA_NR_IRQS, |
| .init_irq = pxa25x_init_irq, |
| .handle_irq = pxa25x_handle_irq, |
| .init_time = pxa_timer_init, |
| .init_machine = palmtc_init, |
| .restart = pxa_restart, |
| MACHINE_END |