| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Procedures for interfacing to Open Firmware. |
| * |
| * Paul Mackerras August 1996. |
| * Copyright (C) 1996-2005 Paul Mackerras. |
| * |
| * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. |
| * {engebret|bergner}@us.ibm.com |
| */ |
| |
| #undef DEBUG_PROM |
| |
| /* we cannot use FORTIFY as it brings in new symbols */ |
| #define __NO_FORTIFY |
| |
| #include <linux/stdarg.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/threads.h> |
| #include <linux/spinlock.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/proc_fs.h> |
| #include <linux/delay.h> |
| #include <linux/initrd.h> |
| #include <linux/bitops.h> |
| #include <linux/pgtable.h> |
| #include <linux/printk.h> |
| #include <asm/prom.h> |
| #include <asm/rtas.h> |
| #include <asm/page.h> |
| #include <asm/processor.h> |
| #include <asm/interrupt.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/smp.h> |
| #include <asm/mmu.h> |
| #include <asm/iommu.h> |
| #include <asm/btext.h> |
| #include <asm/sections.h> |
| #include <asm/machdep.h> |
| #include <asm/asm-prototypes.h> |
| #include <asm/ultravisor-api.h> |
| |
| #include <linux/linux_logo.h> |
| |
| /* All of prom_init bss lives here */ |
| #define __prombss __section(".bss.prominit") |
| |
| /* |
| * Eventually bump that one up |
| */ |
| #define DEVTREE_CHUNK_SIZE 0x100000 |
| |
| /* |
| * This is the size of the local memory reserve map that gets copied |
| * into the boot params passed to the kernel. That size is totally |
| * flexible as the kernel just reads the list until it encounters an |
| * entry with size 0, so it can be changed without breaking binary |
| * compatibility |
| */ |
| #define MEM_RESERVE_MAP_SIZE 8 |
| |
| /* |
| * prom_init() is called very early on, before the kernel text |
| * and data have been mapped to KERNELBASE. At this point the code |
| * is running at whatever address it has been loaded at. |
| * On ppc32 we compile with -mrelocatable, which means that references |
| * to extern and static variables get relocated automatically. |
| * ppc64 objects are always relocatable, we just need to relocate the |
| * TOC. |
| * |
| * Because OF may have mapped I/O devices into the area starting at |
| * KERNELBASE, particularly on CHRP machines, we can't safely call |
| * OF once the kernel has been mapped to KERNELBASE. Therefore all |
| * OF calls must be done within prom_init(). |
| * |
| * ADDR is used in calls to call_prom. The 4th and following |
| * arguments to call_prom should be 32-bit values. |
| * On ppc64, 64 bit values are truncated to 32 bits (and |
| * fortunately don't get interpreted as two arguments). |
| */ |
| #define ADDR(x) (u32)(unsigned long)(x) |
| |
| #ifdef CONFIG_PPC64 |
| #define OF_WORKAROUNDS 0 |
| #else |
| #define OF_WORKAROUNDS of_workarounds |
| static int of_workarounds __prombss; |
| #endif |
| |
| #define OF_WA_CLAIM 1 /* do phys/virt claim separately, then map */ |
| #define OF_WA_LONGTRAIL 2 /* work around longtrail bugs */ |
| |
| #define PROM_BUG() do { \ |
| prom_printf("kernel BUG at %s line 0x%x!\n", \ |
| __FILE__, __LINE__); \ |
| __builtin_trap(); \ |
| } while (0) |
| |
| #ifdef DEBUG_PROM |
| #define prom_debug(x...) prom_printf(x) |
| #else |
| #define prom_debug(x...) do { } while (0) |
| #endif |
| |
| |
| typedef u32 prom_arg_t; |
| |
| struct prom_args { |
| __be32 service; |
| __be32 nargs; |
| __be32 nret; |
| __be32 args[10]; |
| }; |
| |
| struct prom_t { |
| ihandle root; |
| phandle chosen; |
| int cpu; |
| ihandle stdout; |
| ihandle mmumap; |
| ihandle memory; |
| }; |
| |
| struct mem_map_entry { |
| __be64 base; |
| __be64 size; |
| }; |
| |
| typedef __be32 cell_t; |
| |
| extern void __start(unsigned long r3, unsigned long r4, unsigned long r5, |
| unsigned long r6, unsigned long r7, unsigned long r8, |
| unsigned long r9); |
| |
| #ifdef CONFIG_PPC64 |
| extern int enter_prom(struct prom_args *args, unsigned long entry); |
| #else |
| static inline int enter_prom(struct prom_args *args, unsigned long entry) |
| { |
| return ((int (*)(struct prom_args *))entry)(args); |
| } |
| #endif |
| |
| extern void copy_and_flush(unsigned long dest, unsigned long src, |
| unsigned long size, unsigned long offset); |
| |
| /* prom structure */ |
| static struct prom_t __prombss prom; |
| |
| static unsigned long __prombss prom_entry; |
| |
| static char __prombss of_stdout_device[256]; |
| static char __prombss prom_scratch[256]; |
| |
| static unsigned long __prombss dt_header_start; |
| static unsigned long __prombss dt_struct_start, dt_struct_end; |
| static unsigned long __prombss dt_string_start, dt_string_end; |
| |
| static unsigned long __prombss prom_initrd_start, prom_initrd_end; |
| |
| #ifdef CONFIG_PPC64 |
| static int __prombss prom_iommu_force_on; |
| static int __prombss prom_iommu_off; |
| static unsigned long __prombss prom_tce_alloc_start; |
| static unsigned long __prombss prom_tce_alloc_end; |
| #endif |
| |
| #ifdef CONFIG_PPC_PSERIES |
| static bool __prombss prom_radix_disable; |
| static bool __prombss prom_radix_gtse_disable; |
| static bool __prombss prom_xive_disable; |
| #endif |
| |
| #ifdef CONFIG_PPC_SVM |
| static bool __prombss prom_svm_enable; |
| #endif |
| |
| struct platform_support { |
| bool hash_mmu; |
| bool radix_mmu; |
| bool radix_gtse; |
| bool xive; |
| }; |
| |
| /* Platforms codes are now obsolete in the kernel. Now only used within this |
| * file and ultimately gone too. Feel free to change them if you need, they |
| * are not shared with anything outside of this file anymore |
| */ |
| #define PLATFORM_PSERIES 0x0100 |
| #define PLATFORM_PSERIES_LPAR 0x0101 |
| #define PLATFORM_LPAR 0x0001 |
| #define PLATFORM_POWERMAC 0x0400 |
| #define PLATFORM_GENERIC 0x0500 |
| |
| static int __prombss of_platform; |
| |
| static char __prombss prom_cmd_line[COMMAND_LINE_SIZE]; |
| |
| static unsigned long __prombss prom_memory_limit; |
| |
| static unsigned long __prombss alloc_top; |
| static unsigned long __prombss alloc_top_high; |
| static unsigned long __prombss alloc_bottom; |
| static unsigned long __prombss rmo_top; |
| static unsigned long __prombss ram_top; |
| |
| static struct mem_map_entry __prombss mem_reserve_map[MEM_RESERVE_MAP_SIZE]; |
| static int __prombss mem_reserve_cnt; |
| |
| static cell_t __prombss regbuf[1024]; |
| |
| static bool __prombss rtas_has_query_cpu_stopped; |
| |
| |
| /* |
| * Error results ... some OF calls will return "-1" on error, some |
| * will return 0, some will return either. To simplify, here are |
| * macros to use with any ihandle or phandle return value to check if |
| * it is valid |
| */ |
| |
| #define PROM_ERROR (-1u) |
| #define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) |
| #define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) |
| |
| /* Copied from lib/string.c and lib/kstrtox.c */ |
| |
| static int __init prom_strcmp(const char *cs, const char *ct) |
| { |
| unsigned char c1, c2; |
| |
| while (1) { |
| c1 = *cs++; |
| c2 = *ct++; |
| if (c1 != c2) |
| return c1 < c2 ? -1 : 1; |
| if (!c1) |
| break; |
| } |
| return 0; |
| } |
| |
| static ssize_t __init prom_strscpy_pad(char *dest, const char *src, size_t n) |
| { |
| ssize_t rc; |
| size_t i; |
| |
| if (n == 0 || n > INT_MAX) |
| return -E2BIG; |
| |
| // Copy up to n bytes |
| for (i = 0; i < n && src[i] != '\0'; i++) |
| dest[i] = src[i]; |
| |
| rc = i; |
| |
| // If we copied all n then we have run out of space for the nul |
| if (rc == n) { |
| // Rewind by one character to ensure nul termination |
| i--; |
| rc = -E2BIG; |
| } |
| |
| for (; i < n; i++) |
| dest[i] = '\0'; |
| |
| return rc; |
| } |
| |
| static int __init prom_strncmp(const char *cs, const char *ct, size_t count) |
| { |
| unsigned char c1, c2; |
| |
| while (count) { |
| c1 = *cs++; |
| c2 = *ct++; |
| if (c1 != c2) |
| return c1 < c2 ? -1 : 1; |
| if (!c1) |
| break; |
| count--; |
| } |
| return 0; |
| } |
| |
| static size_t __init prom_strlen(const char *s) |
| { |
| const char *sc; |
| |
| for (sc = s; *sc != '\0'; ++sc) |
| /* nothing */; |
| return sc - s; |
| } |
| |
| static int __init prom_memcmp(const void *cs, const void *ct, size_t count) |
| { |
| const unsigned char *su1, *su2; |
| int res = 0; |
| |
| for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--) |
| if ((res = *su1 - *su2) != 0) |
| break; |
| return res; |
| } |
| |
| static char __init *prom_strstr(const char *s1, const char *s2) |
| { |
| size_t l1, l2; |
| |
| l2 = prom_strlen(s2); |
| if (!l2) |
| return (char *)s1; |
| l1 = prom_strlen(s1); |
| while (l1 >= l2) { |
| l1--; |
| if (!prom_memcmp(s1, s2, l2)) |
| return (char *)s1; |
| s1++; |
| } |
| return NULL; |
| } |
| |
| static size_t __init prom_strlcat(char *dest, const char *src, size_t count) |
| { |
| size_t dsize = prom_strlen(dest); |
| size_t len = prom_strlen(src); |
| size_t res = dsize + len; |
| |
| /* This would be a bug */ |
| if (dsize >= count) |
| return count; |
| |
| dest += dsize; |
| count -= dsize; |
| if (len >= count) |
| len = count-1; |
| memcpy(dest, src, len); |
| dest[len] = 0; |
| return res; |
| |
| } |
| |
| #ifdef CONFIG_PPC_PSERIES |
| static int __init prom_strtobool(const char *s, bool *res) |
| { |
| if (!s) |
| return -EINVAL; |
| |
| switch (s[0]) { |
| case 'y': |
| case 'Y': |
| case '1': |
| *res = true; |
| return 0; |
| case 'n': |
| case 'N': |
| case '0': |
| *res = false; |
| return 0; |
| case 'o': |
| case 'O': |
| switch (s[1]) { |
| case 'n': |
| case 'N': |
| *res = true; |
| return 0; |
| case 'f': |
| case 'F': |
| *res = false; |
| return 0; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| #endif |
| |
| /* This is the one and *ONLY* place where we actually call open |
| * firmware. |
| */ |
| |
| static int __init call_prom(const char *service, int nargs, int nret, ...) |
| { |
| int i; |
| struct prom_args args; |
| va_list list; |
| |
| args.service = cpu_to_be32(ADDR(service)); |
| args.nargs = cpu_to_be32(nargs); |
| args.nret = cpu_to_be32(nret); |
| |
| va_start(list, nret); |
| for (i = 0; i < nargs; i++) |
| args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t)); |
| va_end(list); |
| |
| for (i = 0; i < nret; i++) |
| args.args[nargs+i] = 0; |
| |
| if (enter_prom(&args, prom_entry) < 0) |
| return PROM_ERROR; |
| |
| return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0; |
| } |
| |
| static int __init call_prom_ret(const char *service, int nargs, int nret, |
| prom_arg_t *rets, ...) |
| { |
| int i; |
| struct prom_args args; |
| va_list list; |
| |
| args.service = cpu_to_be32(ADDR(service)); |
| args.nargs = cpu_to_be32(nargs); |
| args.nret = cpu_to_be32(nret); |
| |
| va_start(list, rets); |
| for (i = 0; i < nargs; i++) |
| args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t)); |
| va_end(list); |
| |
| for (i = 0; i < nret; i++) |
| args.args[nargs+i] = 0; |
| |
| if (enter_prom(&args, prom_entry) < 0) |
| return PROM_ERROR; |
| |
| if (rets != NULL) |
| for (i = 1; i < nret; ++i) |
| rets[i-1] = be32_to_cpu(args.args[nargs+i]); |
| |
| return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0; |
| } |
| |
| |
| static void __init prom_print(const char *msg) |
| { |
| const char *p, *q; |
| |
| if (prom.stdout == 0) |
| return; |
| |
| for (p = msg; *p != 0; p = q) { |
| for (q = p; *q != 0 && *q != '\n'; ++q) |
| ; |
| if (q > p) |
| call_prom("write", 3, 1, prom.stdout, p, q - p); |
| if (*q == 0) |
| break; |
| ++q; |
| call_prom("write", 3, 1, prom.stdout, ADDR("\r\n"), 2); |
| } |
| } |
| |
| |
| /* |
| * Both prom_print_hex & prom_print_dec takes an unsigned long as input so that |
| * we do not need __udivdi3 or __umoddi3 on 32bits. |
| */ |
| static void __init prom_print_hex(unsigned long val) |
| { |
| int i, nibbles = sizeof(val)*2; |
| char buf[sizeof(val)*2+1]; |
| |
| for (i = nibbles-1; i >= 0; i--) { |
| buf[i] = (val & 0xf) + '0'; |
| if (buf[i] > '9') |
| buf[i] += ('a'-'0'-10); |
| val >>= 4; |
| } |
| buf[nibbles] = '\0'; |
| call_prom("write", 3, 1, prom.stdout, buf, nibbles); |
| } |
| |
| /* max number of decimal digits in an unsigned long */ |
| #define UL_DIGITS 21 |
| static void __init prom_print_dec(unsigned long val) |
| { |
| int i, size; |
| char buf[UL_DIGITS+1]; |
| |
| for (i = UL_DIGITS-1; i >= 0; i--) { |
| buf[i] = (val % 10) + '0'; |
| val = val/10; |
| if (val == 0) |
| break; |
| } |
| /* shift stuff down */ |
| size = UL_DIGITS - i; |
| call_prom("write", 3, 1, prom.stdout, buf+i, size); |
| } |
| |
| __printf(1, 2) |
| static void __init prom_printf(const char *format, ...) |
| { |
| const char *p, *q, *s; |
| va_list args; |
| unsigned long v; |
| long vs; |
| int n = 0; |
| |
| va_start(args, format); |
| for (p = format; *p != 0; p = q) { |
| for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) |
| ; |
| if (q > p) |
| call_prom("write", 3, 1, prom.stdout, p, q - p); |
| if (*q == 0) |
| break; |
| if (*q == '\n') { |
| ++q; |
| call_prom("write", 3, 1, prom.stdout, |
| ADDR("\r\n"), 2); |
| continue; |
| } |
| ++q; |
| if (*q == 0) |
| break; |
| while (*q == 'l') { |
| ++q; |
| ++n; |
| } |
| switch (*q) { |
| case 's': |
| ++q; |
| s = va_arg(args, const char *); |
| prom_print(s); |
| break; |
| case 'x': |
| ++q; |
| switch (n) { |
| case 0: |
| v = va_arg(args, unsigned int); |
| break; |
| case 1: |
| v = va_arg(args, unsigned long); |
| break; |
| case 2: |
| default: |
| v = va_arg(args, unsigned long long); |
| break; |
| } |
| prom_print_hex(v); |
| break; |
| case 'u': |
| ++q; |
| switch (n) { |
| case 0: |
| v = va_arg(args, unsigned int); |
| break; |
| case 1: |
| v = va_arg(args, unsigned long); |
| break; |
| case 2: |
| default: |
| v = va_arg(args, unsigned long long); |
| break; |
| } |
| prom_print_dec(v); |
| break; |
| case 'd': |
| ++q; |
| switch (n) { |
| case 0: |
| vs = va_arg(args, int); |
| break; |
| case 1: |
| vs = va_arg(args, long); |
| break; |
| case 2: |
| default: |
| vs = va_arg(args, long long); |
| break; |
| } |
| if (vs < 0) { |
| prom_print("-"); |
| vs = -vs; |
| } |
| prom_print_dec(vs); |
| break; |
| } |
| } |
| va_end(args); |
| } |
| |
| |
| static unsigned int __init prom_claim(unsigned long virt, unsigned long size, |
| unsigned long align) |
| { |
| |
| if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) { |
| /* |
| * Old OF requires we claim physical and virtual separately |
| * and then map explicitly (assuming virtual mode) |
| */ |
| int ret; |
| prom_arg_t result; |
| |
| ret = call_prom_ret("call-method", 5, 2, &result, |
| ADDR("claim"), prom.memory, |
| align, size, virt); |
| if (ret != 0 || result == -1) |
| return -1; |
| ret = call_prom_ret("call-method", 5, 2, &result, |
| ADDR("claim"), prom.mmumap, |
| align, size, virt); |
| if (ret != 0) { |
| call_prom("call-method", 4, 1, ADDR("release"), |
| prom.memory, size, virt); |
| return -1; |
| } |
| /* the 0x12 is M (coherence) + PP == read/write */ |
| call_prom("call-method", 6, 1, |
| ADDR("map"), prom.mmumap, 0x12, size, virt, virt); |
| return virt; |
| } |
| return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, |
| (prom_arg_t)align); |
| } |
| |
| static void __init __attribute__((noreturn)) prom_panic(const char *reason) |
| { |
| prom_print(reason); |
| /* Do not call exit because it clears the screen on pmac |
| * it also causes some sort of double-fault on early pmacs */ |
| if (of_platform == PLATFORM_POWERMAC) |
| asm("trap\n"); |
| |
| /* ToDo: should put up an SRC here on pSeries */ |
| call_prom("exit", 0, 0); |
| |
| for (;;) /* should never get here */ |
| ; |
| } |
| |
| |
| static int __init prom_next_node(phandle *nodep) |
| { |
| phandle node; |
| |
| if ((node = *nodep) != 0 |
| && (*nodep = call_prom("child", 1, 1, node)) != 0) |
| return 1; |
| if ((*nodep = call_prom("peer", 1, 1, node)) != 0) |
| return 1; |
| for (;;) { |
| if ((node = call_prom("parent", 1, 1, node)) == 0) |
| return 0; |
| if ((*nodep = call_prom("peer", 1, 1, node)) != 0) |
| return 1; |
| } |
| } |
| |
| static inline int __init prom_getprop(phandle node, const char *pname, |
| void *value, size_t valuelen) |
| { |
| return call_prom("getprop", 4, 1, node, ADDR(pname), |
| (u32)(unsigned long) value, (u32) valuelen); |
| } |
| |
| static inline int __init prom_getproplen(phandle node, const char *pname) |
| { |
| return call_prom("getproplen", 2, 1, node, ADDR(pname)); |
| } |
| |
| static void add_string(char **str, const char *q) |
| { |
| char *p = *str; |
| |
| while (*q) |
| *p++ = *q++; |
| *p++ = ' '; |
| *str = p; |
| } |
| |
| static char *tohex(unsigned int x) |
| { |
| static const char digits[] __initconst = "0123456789abcdef"; |
| static char result[9] __prombss; |
| int i; |
| |
| result[8] = 0; |
| i = 8; |
| do { |
| --i; |
| result[i] = digits[x & 0xf]; |
| x >>= 4; |
| } while (x != 0 && i > 0); |
| return &result[i]; |
| } |
| |
| static int __init prom_setprop(phandle node, const char *nodename, |
| const char *pname, void *value, size_t valuelen) |
| { |
| char cmd[256], *p; |
| |
| if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL)) |
| return call_prom("setprop", 4, 1, node, ADDR(pname), |
| (u32)(unsigned long) value, (u32) valuelen); |
| |
| /* gah... setprop doesn't work on longtrail, have to use interpret */ |
| p = cmd; |
| add_string(&p, "dev"); |
| add_string(&p, nodename); |
| add_string(&p, tohex((u32)(unsigned long) value)); |
| add_string(&p, tohex(valuelen)); |
| add_string(&p, tohex(ADDR(pname))); |
| add_string(&p, tohex(prom_strlen(pname))); |
| add_string(&p, "property"); |
| *p = 0; |
| return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); |
| } |
| |
| /* We can't use the standard versions because of relocation headaches. */ |
| #define prom_isxdigit(c) \ |
| (('0' <= (c) && (c) <= '9') || ('a' <= (c) && (c) <= 'f') || ('A' <= (c) && (c) <= 'F')) |
| |
| #define prom_isdigit(c) ('0' <= (c) && (c) <= '9') |
| #define prom_islower(c) ('a' <= (c) && (c) <= 'z') |
| #define prom_toupper(c) (prom_islower(c) ? ((c) - 'a' + 'A') : (c)) |
| |
| static unsigned long prom_strtoul(const char *cp, const char **endp) |
| { |
| unsigned long result = 0, base = 10, value; |
| |
| if (*cp == '0') { |
| base = 8; |
| cp++; |
| if (prom_toupper(*cp) == 'X') { |
| cp++; |
| base = 16; |
| } |
| } |
| |
| while (prom_isxdigit(*cp) && |
| (value = prom_isdigit(*cp) ? *cp - '0' : prom_toupper(*cp) - 'A' + 10) < base) { |
| result = result * base + value; |
| cp++; |
| } |
| |
| if (endp) |
| *endp = cp; |
| |
| return result; |
| } |
| |
| static unsigned long prom_memparse(const char *ptr, const char **retptr) |
| { |
| unsigned long ret = prom_strtoul(ptr, retptr); |
| int shift = 0; |
| |
| /* |
| * We can't use a switch here because GCC *may* generate a |
| * jump table which won't work, because we're not running at |
| * the address we're linked at. |
| */ |
| if ('G' == **retptr || 'g' == **retptr) |
| shift = 30; |
| |
| if ('M' == **retptr || 'm' == **retptr) |
| shift = 20; |
| |
| if ('K' == **retptr || 'k' == **retptr) |
| shift = 10; |
| |
| if (shift) { |
| ret <<= shift; |
| (*retptr)++; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Early parsing of the command line passed to the kernel, used for |
| * "mem=x" and the options that affect the iommu |
| */ |
| static void __init early_cmdline_parse(void) |
| { |
| const char *opt; |
| |
| char *p; |
| int l = 0; |
| |
| prom_cmd_line[0] = 0; |
| p = prom_cmd_line; |
| |
| if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0) |
| l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1); |
| |
| if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0') |
| prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE, |
| sizeof(prom_cmd_line)); |
| |
| prom_printf("command line: %s\n", prom_cmd_line); |
| |
| #ifdef CONFIG_PPC64 |
| opt = prom_strstr(prom_cmd_line, "iommu="); |
| if (opt) { |
| prom_printf("iommu opt is: %s\n", opt); |
| opt += 6; |
| while (*opt && *opt == ' ') |
| opt++; |
| if (!prom_strncmp(opt, "off", 3)) |
| prom_iommu_off = 1; |
| else if (!prom_strncmp(opt, "force", 5)) |
| prom_iommu_force_on = 1; |
| } |
| #endif |
| opt = prom_strstr(prom_cmd_line, "mem="); |
| if (opt) { |
| opt += 4; |
| prom_memory_limit = prom_memparse(opt, (const char **)&opt); |
| #ifdef CONFIG_PPC64 |
| /* Align to 16 MB == size of ppc64 large page */ |
| prom_memory_limit = ALIGN(prom_memory_limit, 0x1000000); |
| #endif |
| } |
| |
| #ifdef CONFIG_PPC_PSERIES |
| prom_radix_disable = !IS_ENABLED(CONFIG_PPC_RADIX_MMU_DEFAULT); |
| opt = prom_strstr(prom_cmd_line, "disable_radix"); |
| if (opt) { |
| opt += 13; |
| if (*opt && *opt == '=') { |
| bool val; |
| |
| if (prom_strtobool(++opt, &val)) |
| prom_radix_disable = false; |
| else |
| prom_radix_disable = val; |
| } else |
| prom_radix_disable = true; |
| } |
| if (prom_radix_disable) |
| prom_debug("Radix disabled from cmdline\n"); |
| |
| opt = prom_strstr(prom_cmd_line, "radix_hcall_invalidate=on"); |
| if (opt) { |
| prom_radix_gtse_disable = true; |
| prom_debug("Radix GTSE disabled from cmdline\n"); |
| } |
| |
| opt = prom_strstr(prom_cmd_line, "xive=off"); |
| if (opt) { |
| prom_xive_disable = true; |
| prom_debug("XIVE disabled from cmdline\n"); |
| } |
| #endif /* CONFIG_PPC_PSERIES */ |
| |
| #ifdef CONFIG_PPC_SVM |
| opt = prom_strstr(prom_cmd_line, "svm="); |
| if (opt) { |
| bool val; |
| |
| opt += sizeof("svm=") - 1; |
| if (!prom_strtobool(opt, &val)) |
| prom_svm_enable = val; |
| } |
| #endif /* CONFIG_PPC_SVM */ |
| } |
| |
| #ifdef CONFIG_PPC_PSERIES |
| /* |
| * The architecture vector has an array of PVR mask/value pairs, |
| * followed by # option vectors - 1, followed by the option vectors. |
| * |
| * See prom.h for the definition of the bits specified in the |
| * architecture vector. |
| */ |
| |
| /* Firmware expects the value to be n - 1, where n is the # of vectors */ |
| #define NUM_VECTORS(n) ((n) - 1) |
| |
| /* |
| * Firmware expects 1 + n - 2, where n is the length of the option vector in |
| * bytes. The 1 accounts for the length byte itself, the - 2 .. ? |
| */ |
| #define VECTOR_LENGTH(n) (1 + (n) - 2) |
| |
| struct option_vector1 { |
| u8 byte1; |
| u8 arch_versions; |
| u8 arch_versions3; |
| } __packed; |
| |
| struct option_vector2 { |
| u8 byte1; |
| __be16 reserved; |
| __be32 real_base; |
| __be32 real_size; |
| __be32 virt_base; |
| __be32 virt_size; |
| __be32 load_base; |
| __be32 min_rma; |
| __be32 min_load; |
| u8 min_rma_percent; |
| u8 max_pft_size; |
| } __packed; |
| |
| struct option_vector3 { |
| u8 byte1; |
| u8 byte2; |
| } __packed; |
| |
| struct option_vector4 { |
| u8 byte1; |
| u8 min_vp_cap; |
| } __packed; |
| |
| struct option_vector5 { |
| u8 byte1; |
| u8 byte2; |
| u8 byte3; |
| u8 cmo; |
| u8 associativity; |
| u8 bin_opts; |
| u8 micro_checkpoint; |
| u8 reserved0; |
| __be32 max_cpus; |
| __be16 papr_level; |
| __be16 reserved1; |
| u8 platform_facilities; |
| u8 reserved2; |
| __be16 reserved3; |
| u8 subprocessors; |
| u8 byte22; |
| u8 intarch; |
| u8 mmu; |
| u8 hash_ext; |
| u8 radix_ext; |
| } __packed; |
| |
| struct option_vector6 { |
| u8 reserved; |
| u8 secondary_pteg; |
| u8 os_name; |
| } __packed; |
| |
| struct option_vector7 { |
| u8 os_id[256]; |
| } __packed; |
| |
| struct ibm_arch_vec { |
| struct { u32 mask, val; } pvrs[14]; |
| |
| u8 num_vectors; |
| |
| u8 vec1_len; |
| struct option_vector1 vec1; |
| |
| u8 vec2_len; |
| struct option_vector2 vec2; |
| |
| u8 vec3_len; |
| struct option_vector3 vec3; |
| |
| u8 vec4_len; |
| struct option_vector4 vec4; |
| |
| u8 vec5_len; |
| struct option_vector5 vec5; |
| |
| u8 vec6_len; |
| struct option_vector6 vec6; |
| |
| u8 vec7_len; |
| struct option_vector7 vec7; |
| } __packed; |
| |
| static const struct ibm_arch_vec ibm_architecture_vec_template __initconst = { |
| .pvrs = { |
| { |
| .mask = cpu_to_be32(0xfffe0000), /* POWER5/POWER5+ */ |
| .val = cpu_to_be32(0x003a0000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffff0000), /* POWER6 */ |
| .val = cpu_to_be32(0x003e0000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffff0000), /* POWER7 */ |
| .val = cpu_to_be32(0x003f0000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffff0000), /* POWER8E */ |
| .val = cpu_to_be32(0x004b0000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffff0000), /* POWER8NVL */ |
| .val = cpu_to_be32(0x004c0000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffff0000), /* POWER8 */ |
| .val = cpu_to_be32(0x004d0000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffff0000), /* POWER9 */ |
| .val = cpu_to_be32(0x004e0000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffff0000), /* POWER10 */ |
| .val = cpu_to_be32(0x00800000), |
| }, |
| { |
| .mask = cpu_to_be32(0xffffffff), /* all 3.1-compliant */ |
| .val = cpu_to_be32(0x0f000006), |
| }, |
| { |
| .mask = cpu_to_be32(0xffffffff), /* all 3.00-compliant */ |
| .val = cpu_to_be32(0x0f000005), |
| }, |
| { |
| .mask = cpu_to_be32(0xffffffff), /* all 2.07-compliant */ |
| .val = cpu_to_be32(0x0f000004), |
| }, |
| { |
| .mask = cpu_to_be32(0xffffffff), /* all 2.06-compliant */ |
| .val = cpu_to_be32(0x0f000003), |
| }, |
| { |
| .mask = cpu_to_be32(0xffffffff), /* all 2.05-compliant */ |
| .val = cpu_to_be32(0x0f000002), |
| }, |
| { |
| .mask = cpu_to_be32(0xfffffffe), /* all 2.04-compliant and earlier */ |
| .val = cpu_to_be32(0x0f000001), |
| }, |
| }, |
| |
| .num_vectors = NUM_VECTORS(6), |
| |
| .vec1_len = VECTOR_LENGTH(sizeof(struct option_vector1)), |
| .vec1 = { |
| .byte1 = 0, |
| .arch_versions = OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | |
| OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07, |
| .arch_versions3 = OV1_PPC_3_00 | OV1_PPC_3_1, |
| }, |
| |
| .vec2_len = VECTOR_LENGTH(sizeof(struct option_vector2)), |
| /* option vector 2: Open Firmware options supported */ |
| .vec2 = { |
| .byte1 = OV2_REAL_MODE, |
| .reserved = 0, |
| .real_base = cpu_to_be32(0xffffffff), |
| .real_size = cpu_to_be32(0xffffffff), |
| .virt_base = cpu_to_be32(0xffffffff), |
| .virt_size = cpu_to_be32(0xffffffff), |
| .load_base = cpu_to_be32(0xffffffff), |
| .min_rma = cpu_to_be32(512), /* 512MB min RMA */ |
| .min_load = cpu_to_be32(0xffffffff), /* full client load */ |
| .min_rma_percent = 0, /* min RMA percentage of total RAM */ |
| .max_pft_size = 48, /* max log_2(hash table size) */ |
| }, |
| |
| .vec3_len = VECTOR_LENGTH(sizeof(struct option_vector3)), |
| /* option vector 3: processor options supported */ |
| .vec3 = { |
| .byte1 = 0, /* don't ignore, don't halt */ |
| .byte2 = OV3_FP | OV3_VMX | OV3_DFP, |
| }, |
| |
| .vec4_len = VECTOR_LENGTH(sizeof(struct option_vector4)), |
| /* option vector 4: IBM PAPR implementation */ |
| .vec4 = { |
| .byte1 = 0, /* don't halt */ |
| .min_vp_cap = OV4_MIN_ENT_CAP, /* minimum VP entitled capacity */ |
| }, |
| |
| .vec5_len = VECTOR_LENGTH(sizeof(struct option_vector5)), |
| /* option vector 5: PAPR/OF options */ |
| .vec5 = { |
| .byte1 = 0, /* don't ignore, don't halt */ |
| .byte2 = OV5_FEAT(OV5_LPAR) | OV5_FEAT(OV5_SPLPAR) | OV5_FEAT(OV5_LARGE_PAGES) | |
| OV5_FEAT(OV5_DRCONF_MEMORY) | OV5_FEAT(OV5_DONATE_DEDICATE_CPU) | |
| #ifdef CONFIG_PCI_MSI |
| /* PCIe/MSI support. Without MSI full PCIe is not supported */ |
| OV5_FEAT(OV5_MSI), |
| #else |
| 0, |
| #endif |
| .byte3 = 0, |
| .cmo = |
| #ifdef CONFIG_PPC_SMLPAR |
| OV5_FEAT(OV5_CMO) | OV5_FEAT(OV5_XCMO), |
| #else |
| 0, |
| #endif |
| .associativity = OV5_FEAT(OV5_FORM1_AFFINITY) | OV5_FEAT(OV5_PRRN) | |
| OV5_FEAT(OV5_FORM2_AFFINITY), |
| .bin_opts = OV5_FEAT(OV5_RESIZE_HPT) | OV5_FEAT(OV5_HP_EVT), |
| .micro_checkpoint = 0, |
| .reserved0 = 0, |
| .max_cpus = cpu_to_be32(NR_CPUS), /* number of cores supported */ |
| .papr_level = 0, |
| .reserved1 = 0, |
| .platform_facilities = OV5_FEAT(OV5_PFO_HW_RNG) | OV5_FEAT(OV5_PFO_HW_ENCR) | OV5_FEAT(OV5_PFO_HW_842), |
| .reserved2 = 0, |
| .reserved3 = 0, |
| .subprocessors = 1, |
| .byte22 = OV5_FEAT(OV5_DRMEM_V2) | OV5_FEAT(OV5_DRC_INFO), |
| .intarch = 0, |
| .mmu = 0, |
| .hash_ext = 0, |
| .radix_ext = 0, |
| }, |
| |
| /* option vector 6: IBM PAPR hints */ |
| .vec6_len = VECTOR_LENGTH(sizeof(struct option_vector6)), |
| .vec6 = { |
| .reserved = 0, |
| .secondary_pteg = 0, |
| .os_name = OV6_LINUX, |
| }, |
| |
| /* option vector 7: OS Identification */ |
| .vec7_len = VECTOR_LENGTH(sizeof(struct option_vector7)), |
| }; |
| |
| static struct ibm_arch_vec __prombss ibm_architecture_vec ____cacheline_aligned; |
| |
| /* Old method - ELF header with PT_NOTE sections only works on BE */ |
| #ifdef __BIG_ENDIAN__ |
| static const struct fake_elf { |
| Elf32_Ehdr elfhdr; |
| Elf32_Phdr phdr[2]; |
| struct chrpnote { |
| u32 namesz; |
| u32 descsz; |
| u32 type; |
| char name[8]; /* "PowerPC" */ |
| struct chrpdesc { |
| u32 real_mode; |
| u32 real_base; |
| u32 real_size; |
| u32 virt_base; |
| u32 virt_size; |
| u32 load_base; |
| } chrpdesc; |
| } chrpnote; |
| struct rpanote { |
| u32 namesz; |
| u32 descsz; |
| u32 type; |
| char name[24]; /* "IBM,RPA-Client-Config" */ |
| struct rpadesc { |
| u32 lpar_affinity; |
| u32 min_rmo_size; |
| u32 min_rmo_percent; |
| u32 max_pft_size; |
| u32 splpar; |
| u32 min_load; |
| u32 new_mem_def; |
| u32 ignore_me; |
| } rpadesc; |
| } rpanote; |
| } fake_elf __initconst = { |
| .elfhdr = { |
| .e_ident = { 0x7f, 'E', 'L', 'F', |
| ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, |
| .e_type = ET_EXEC, /* yeah right */ |
| .e_machine = EM_PPC, |
| .e_version = EV_CURRENT, |
| .e_phoff = offsetof(struct fake_elf, phdr), |
| .e_phentsize = sizeof(Elf32_Phdr), |
| .e_phnum = 2 |
| }, |
| .phdr = { |
| [0] = { |
| .p_type = PT_NOTE, |
| .p_offset = offsetof(struct fake_elf, chrpnote), |
| .p_filesz = sizeof(struct chrpnote) |
| }, [1] = { |
| .p_type = PT_NOTE, |
| .p_offset = offsetof(struct fake_elf, rpanote), |
| .p_filesz = sizeof(struct rpanote) |
| } |
| }, |
| .chrpnote = { |
| .namesz = sizeof("PowerPC"), |
| .descsz = sizeof(struct chrpdesc), |
| .type = 0x1275, |
| .name = "PowerPC", |
| .chrpdesc = { |
| .real_mode = ~0U, /* ~0 means "don't care" */ |
| .real_base = ~0U, |
| .real_size = ~0U, |
| .virt_base = ~0U, |
| .virt_size = ~0U, |
| .load_base = ~0U |
| }, |
| }, |
| .rpanote = { |
| .namesz = sizeof("IBM,RPA-Client-Config"), |
| .descsz = sizeof(struct rpadesc), |
| .type = 0x12759999, |
| .name = "IBM,RPA-Client-Config", |
| .rpadesc = { |
| .lpar_affinity = 0, |
| .min_rmo_size = 64, /* in megabytes */ |
| .min_rmo_percent = 0, |
| .max_pft_size = 48, /* 2^48 bytes max PFT size */ |
| .splpar = 1, |
| .min_load = ~0U, |
| .new_mem_def = 0 |
| } |
| } |
| }; |
| #endif /* __BIG_ENDIAN__ */ |
| |
| static int __init prom_count_smt_threads(void) |
| { |
| phandle node; |
| char type[64]; |
| unsigned int plen; |
| |
| /* Pick up th first CPU node we can find */ |
| for (node = 0; prom_next_node(&node); ) { |
| type[0] = 0; |
| prom_getprop(node, "device_type", type, sizeof(type)); |
| |
| if (prom_strcmp(type, "cpu")) |
| continue; |
| /* |
| * There is an entry for each smt thread, each entry being |
| * 4 bytes long. All cpus should have the same number of |
| * smt threads, so return after finding the first. |
| */ |
| plen = prom_getproplen(node, "ibm,ppc-interrupt-server#s"); |
| if (plen == PROM_ERROR) |
| break; |
| plen >>= 2; |
| prom_debug("Found %lu smt threads per core\n", (unsigned long)plen); |
| |
| /* Sanity check */ |
| if (plen < 1 || plen > 64) { |
| prom_printf("Threads per core %lu out of bounds, assuming 1\n", |
| (unsigned long)plen); |
| return 1; |
| } |
| return plen; |
| } |
| prom_debug("No threads found, assuming 1 per core\n"); |
| |
| return 1; |
| |
| } |
| |
| static void __init prom_parse_mmu_model(u8 val, |
| struct platform_support *support) |
| { |
| switch (val) { |
| case OV5_FEAT(OV5_MMU_DYNAMIC): |
| case OV5_FEAT(OV5_MMU_EITHER): /* Either Available */ |
| prom_debug("MMU - either supported\n"); |
| support->radix_mmu = !prom_radix_disable; |
| support->hash_mmu = true; |
| break; |
| case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */ |
| prom_debug("MMU - radix only\n"); |
| if (prom_radix_disable) { |
| /* |
| * If we __have__ to do radix, we're better off ignoring |
| * the command line rather than not booting. |
| */ |
| prom_printf("WARNING: Ignoring cmdline option disable_radix\n"); |
| } |
| support->radix_mmu = true; |
| break; |
| case OV5_FEAT(OV5_MMU_HASH): |
| prom_debug("MMU - hash only\n"); |
| support->hash_mmu = true; |
| break; |
| default: |
| prom_debug("Unknown mmu support option: 0x%x\n", val); |
| break; |
| } |
| } |
| |
| static void __init prom_parse_xive_model(u8 val, |
| struct platform_support *support) |
| { |
| switch (val) { |
| case OV5_FEAT(OV5_XIVE_EITHER): /* Either Available */ |
| prom_debug("XIVE - either mode supported\n"); |
| support->xive = !prom_xive_disable; |
| break; |
| case OV5_FEAT(OV5_XIVE_EXPLOIT): /* Only Exploitation mode */ |
| prom_debug("XIVE - exploitation mode supported\n"); |
| if (prom_xive_disable) { |
| /* |
| * If we __have__ to do XIVE, we're better off ignoring |
| * the command line rather than not booting. |
| */ |
| prom_printf("WARNING: Ignoring cmdline option xive=off\n"); |
| } |
| support->xive = true; |
| break; |
| case OV5_FEAT(OV5_XIVE_LEGACY): /* Only Legacy mode */ |
| prom_debug("XIVE - legacy mode supported\n"); |
| break; |
| default: |
| prom_debug("Unknown xive support option: 0x%x\n", val); |
| break; |
| } |
| } |
| |
| static void __init prom_parse_platform_support(u8 index, u8 val, |
| struct platform_support *support) |
| { |
| switch (index) { |
| case OV5_INDX(OV5_MMU_SUPPORT): /* MMU Model */ |
| prom_parse_mmu_model(val & OV5_FEAT(OV5_MMU_SUPPORT), support); |
| break; |
| case OV5_INDX(OV5_RADIX_GTSE): /* Radix Extensions */ |
| if (val & OV5_FEAT(OV5_RADIX_GTSE)) |
| support->radix_gtse = !prom_radix_gtse_disable; |
| break; |
| case OV5_INDX(OV5_XIVE_SUPPORT): /* Interrupt mode */ |
| prom_parse_xive_model(val & OV5_FEAT(OV5_XIVE_SUPPORT), |
| support); |
| break; |
| } |
| } |
| |
| static void __init prom_check_platform_support(void) |
| { |
| struct platform_support supported = { |
| .hash_mmu = false, |
| .radix_mmu = false, |
| .radix_gtse = false, |
| .xive = false |
| }; |
| int prop_len = prom_getproplen(prom.chosen, |
| "ibm,arch-vec-5-platform-support"); |
| |
| /* |
| * First copy the architecture vec template |
| * |
| * use memcpy() instead of *vec = *vec_template so that GCC replaces it |
| * by __memcpy() when KASAN is active |
| */ |
| memcpy(&ibm_architecture_vec, &ibm_architecture_vec_template, |
| sizeof(ibm_architecture_vec)); |
| |
| prom_strscpy_pad(ibm_architecture_vec.vec7.os_id, linux_banner, 256); |
| |
| if (prop_len > 1) { |
| int i; |
| u8 vec[8]; |
| prom_debug("Found ibm,arch-vec-5-platform-support, len: %d\n", |
| prop_len); |
| if (prop_len > sizeof(vec)) |
| prom_printf("WARNING: ibm,arch-vec-5-platform-support longer than expected (len: %d)\n", |
| prop_len); |
| prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support", &vec, sizeof(vec)); |
| for (i = 0; i < prop_len; i += 2) { |
| prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2, vec[i], vec[i + 1]); |
| prom_parse_platform_support(vec[i], vec[i + 1], &supported); |
| } |
| } |
| |
| if (supported.radix_mmu && IS_ENABLED(CONFIG_PPC_RADIX_MMU)) { |
| /* Radix preferred - Check if GTSE is also supported */ |
| prom_debug("Asking for radix\n"); |
| ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_RADIX); |
| if (supported.radix_gtse) |
| ibm_architecture_vec.vec5.radix_ext = |
| OV5_FEAT(OV5_RADIX_GTSE); |
| else |
| prom_debug("Radix GTSE isn't supported\n"); |
| } else if (supported.hash_mmu) { |
| /* Default to hash mmu (if we can) */ |
| prom_debug("Asking for hash\n"); |
| ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_HASH); |
| } else { |
| /* We're probably on a legacy hypervisor */ |
| prom_debug("Assuming legacy hash support\n"); |
| } |
| |
| if (supported.xive) { |
| prom_debug("Asking for XIVE\n"); |
| ibm_architecture_vec.vec5.intarch = OV5_FEAT(OV5_XIVE_EXPLOIT); |
| } |
| } |
| |
| static void __init prom_send_capabilities(void) |
| { |
| ihandle root; |
| prom_arg_t ret; |
| u32 cores; |
| |
| /* Check ibm,arch-vec-5-platform-support and fixup vec5 if required */ |
| prom_check_platform_support(); |
| |
| root = call_prom("open", 1, 1, ADDR("/")); |
| if (root != 0) { |
| /* We need to tell the FW about the number of cores we support. |
| * |
| * To do that, we count the number of threads on the first core |
| * (we assume this is the same for all cores) and use it to |
| * divide NR_CPUS. |
| */ |
| |
| cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads()); |
| prom_printf("Max number of cores passed to firmware: %u (NR_CPUS = %d)\n", |
| cores, NR_CPUS); |
| |
| ibm_architecture_vec.vec5.max_cpus = cpu_to_be32(cores); |
| |
| /* try calling the ibm,client-architecture-support method */ |
| prom_printf("Calling ibm,client-architecture-support..."); |
| if (call_prom_ret("call-method", 3, 2, &ret, |
| ADDR("ibm,client-architecture-support"), |
| root, |
| ADDR(&ibm_architecture_vec)) == 0) { |
| /* the call exists... */ |
| if (ret) |
| prom_printf("\nWARNING: ibm,client-architecture" |
| "-support call FAILED!\n"); |
| call_prom("close", 1, 0, root); |
| prom_printf(" done\n"); |
| return; |
| } |
| call_prom("close", 1, 0, root); |
| prom_printf(" not implemented\n"); |
| } |
| |
| #ifdef __BIG_ENDIAN__ |
| { |
| ihandle elfloader; |
| |
| /* no ibm,client-architecture-support call, try the old way */ |
| elfloader = call_prom("open", 1, 1, |
| ADDR("/packages/elf-loader")); |
| if (elfloader == 0) { |
| prom_printf("couldn't open /packages/elf-loader\n"); |
| return; |
| } |
| call_prom("call-method", 3, 1, ADDR("process-elf-header"), |
| elfloader, ADDR(&fake_elf)); |
| call_prom("close", 1, 0, elfloader); |
| } |
| #endif /* __BIG_ENDIAN__ */ |
| } |
| #endif /* CONFIG_PPC_PSERIES */ |
| |
| /* |
| * Memory allocation strategy... our layout is normally: |
| * |
| * at 14Mb or more we have vmlinux, then a gap and initrd. In some |
| * rare cases, initrd might end up being before the kernel though. |
| * We assume this won't override the final kernel at 0, we have no |
| * provision to handle that in this version, but it should hopefully |
| * never happen. |
| * |
| * alloc_top is set to the top of RMO, eventually shrink down if the |
| * TCEs overlap |
| * |
| * alloc_bottom is set to the top of kernel/initrd |
| * |
| * from there, allocations are done this way : rtas is allocated |
| * topmost, and the device-tree is allocated from the bottom. We try |
| * to grow the device-tree allocation as we progress. If we can't, |
| * then we fail, we don't currently have a facility to restart |
| * elsewhere, but that shouldn't be necessary. |
| * |
| * Note that calls to reserve_mem have to be done explicitly, memory |
| * allocated with either alloc_up or alloc_down isn't automatically |
| * reserved. |
| */ |
| |
| |
| /* |
| * Allocates memory in the RMO upward from the kernel/initrd |
| * |
| * When align is 0, this is a special case, it means to allocate in place |
| * at the current location of alloc_bottom or fail (that is basically |
| * extending the previous allocation). Used for the device-tree flattening |
| */ |
| static unsigned long __init alloc_up(unsigned long size, unsigned long align) |
| { |
| unsigned long base = alloc_bottom; |
| unsigned long addr = 0; |
| |
| if (align) |
| base = ALIGN(base, align); |
| prom_debug("%s(%lx, %lx)\n", __func__, size, align); |
| if (ram_top == 0) |
| prom_panic("alloc_up() called with mem not initialized\n"); |
| |
| if (align) |
| base = ALIGN(alloc_bottom, align); |
| else |
| base = alloc_bottom; |
| |
| for(; (base + size) <= alloc_top; |
| base = ALIGN(base + 0x100000, align)) { |
| prom_debug(" trying: 0x%lx\n\r", base); |
| addr = (unsigned long)prom_claim(base, size, 0); |
| if (addr != PROM_ERROR && addr != 0) |
| break; |
| addr = 0; |
| if (align == 0) |
| break; |
| } |
| if (addr == 0) |
| return 0; |
| alloc_bottom = addr + size; |
| |
| prom_debug(" -> %lx\n", addr); |
| prom_debug(" alloc_bottom : %lx\n", alloc_bottom); |
| prom_debug(" alloc_top : %lx\n", alloc_top); |
| prom_debug(" alloc_top_hi : %lx\n", alloc_top_high); |
| prom_debug(" rmo_top : %lx\n", rmo_top); |
| prom_debug(" ram_top : %lx\n", ram_top); |
| |
| return addr; |
| } |
| |
| /* |
| * Allocates memory downward, either from top of RMO, or if highmem |
| * is set, from the top of RAM. Note that this one doesn't handle |
| * failures. It does claim memory if highmem is not set. |
| */ |
| static unsigned long __init alloc_down(unsigned long size, unsigned long align, |
| int highmem) |
| { |
| unsigned long base, addr = 0; |
| |
| prom_debug("%s(%lx, %lx, %s)\n", __func__, size, align, |
| highmem ? "(high)" : "(low)"); |
| if (ram_top == 0) |
| prom_panic("alloc_down() called with mem not initialized\n"); |
| |
| if (highmem) { |
| /* Carve out storage for the TCE table. */ |
| addr = ALIGN_DOWN(alloc_top_high - size, align); |
| if (addr <= alloc_bottom) |
| return 0; |
| /* Will we bump into the RMO ? If yes, check out that we |
| * didn't overlap existing allocations there, if we did, |
| * we are dead, we must be the first in town ! |
| */ |
| if (addr < rmo_top) { |
| /* Good, we are first */ |
| if (alloc_top == rmo_top) |
| alloc_top = rmo_top = addr; |
| else |
| return 0; |
| } |
| alloc_top_high = addr; |
| goto bail; |
| } |
| |
| base = ALIGN_DOWN(alloc_top - size, align); |
| for (; base > alloc_bottom; |
| base = ALIGN_DOWN(base - 0x100000, align)) { |
| prom_debug(" trying: 0x%lx\n\r", base); |
| addr = (unsigned long)prom_claim(base, size, 0); |
| if (addr != PROM_ERROR && addr != 0) |
| break; |
| addr = 0; |
| } |
| if (addr == 0) |
| return 0; |
| alloc_top = addr; |
| |
| bail: |
| prom_debug(" -> %lx\n", addr); |
| prom_debug(" alloc_bottom : %lx\n", alloc_bottom); |
| prom_debug(" alloc_top : %lx\n", alloc_top); |
| prom_debug(" alloc_top_hi : %lx\n", alloc_top_high); |
| prom_debug(" rmo_top : %lx\n", rmo_top); |
| prom_debug(" ram_top : %lx\n", ram_top); |
| |
| return addr; |
| } |
| |
| /* |
| * Parse a "reg" cell |
| */ |
| static unsigned long __init prom_next_cell(int s, cell_t **cellp) |
| { |
| cell_t *p = *cellp; |
| unsigned long r = 0; |
| |
| /* Ignore more than 2 cells */ |
| while (s > sizeof(unsigned long) / 4) { |
| p++; |
| s--; |
| } |
| r = be32_to_cpu(*p++); |
| #ifdef CONFIG_PPC64 |
| if (s > 1) { |
| r <<= 32; |
| r |= be32_to_cpu(*(p++)); |
| } |
| #endif |
| *cellp = p; |
| return r; |
| } |
| |
| /* |
| * Very dumb function for adding to the memory reserve list, but |
| * we don't need anything smarter at this point |
| * |
| * XXX Eventually check for collisions. They should NEVER happen. |
| * If problems seem to show up, it would be a good start to track |
| * them down. |
| */ |
| static void __init reserve_mem(u64 base, u64 size) |
| { |
| u64 top = base + size; |
| unsigned long cnt = mem_reserve_cnt; |
| |
| if (size == 0) |
| return; |
| |
| /* We need to always keep one empty entry so that we |
| * have our terminator with "size" set to 0 since we are |
| * dumb and just copy this entire array to the boot params |
| */ |
| base = ALIGN_DOWN(base, PAGE_SIZE); |
| top = ALIGN(top, PAGE_SIZE); |
| size = top - base; |
| |
| if (cnt >= (MEM_RESERVE_MAP_SIZE - 1)) |
| prom_panic("Memory reserve map exhausted !\n"); |
| mem_reserve_map[cnt].base = cpu_to_be64(base); |
| mem_reserve_map[cnt].size = cpu_to_be64(size); |
| mem_reserve_cnt = cnt + 1; |
| } |
| |
| /* |
| * Initialize memory allocation mechanism, parse "memory" nodes and |
| * obtain that way the top of memory and RMO to setup out local allocator |
| */ |
| static void __init prom_init_mem(void) |
| { |
| phandle node; |
| char type[64]; |
| unsigned int plen; |
| cell_t *p, *endp; |
| __be32 val; |
| u32 rac, rsc; |
| |
| /* |
| * We iterate the memory nodes to find |
| * 1) top of RMO (first node) |
| * 2) top of memory |
| */ |
| val = cpu_to_be32(2); |
| prom_getprop(prom.root, "#address-cells", &val, sizeof(val)); |
| rac = be32_to_cpu(val); |
| val = cpu_to_be32(1); |
| prom_getprop(prom.root, "#size-cells", &val, sizeof(rsc)); |
| rsc = be32_to_cpu(val); |
| prom_debug("root_addr_cells: %x\n", rac); |
| prom_debug("root_size_cells: %x\n", rsc); |
| |
| prom_debug("scanning memory:\n"); |
| |
| for (node = 0; prom_next_node(&node); ) { |
| type[0] = 0; |
| prom_getprop(node, "device_type", type, sizeof(type)); |
| |
| if (type[0] == 0) { |
| /* |
| * CHRP Longtrail machines have no device_type |
| * on the memory node, so check the name instead... |
| */ |
| prom_getprop(node, "name", type, sizeof(type)); |
| } |
| if (prom_strcmp(type, "memory")) |
| continue; |
| |
| plen = prom_getprop(node, "reg", regbuf, sizeof(regbuf)); |
| if (plen > sizeof(regbuf)) { |
| prom_printf("memory node too large for buffer !\n"); |
| plen = sizeof(regbuf); |
| } |
| p = regbuf; |
| endp = p + (plen / sizeof(cell_t)); |
| |
| #ifdef DEBUG_PROM |
| memset(prom_scratch, 0, sizeof(prom_scratch)); |
| call_prom("package-to-path", 3, 1, node, prom_scratch, |
| sizeof(prom_scratch) - 1); |
| prom_debug(" node %s :\n", prom_scratch); |
| #endif /* DEBUG_PROM */ |
| |
| while ((endp - p) >= (rac + rsc)) { |
| unsigned long base, size; |
| |
| base = prom_next_cell(rac, &p); |
| size = prom_next_cell(rsc, &p); |
| |
| if (size == 0) |
| continue; |
| prom_debug(" %lx %lx\n", base, size); |
| if (base == 0 && (of_platform & PLATFORM_LPAR)) |
| rmo_top = size; |
| if ((base + size) > ram_top) |
| ram_top = base + size; |
| } |
| } |
| |
| alloc_bottom = PAGE_ALIGN((unsigned long)&_end + 0x4000); |
| |
| /* |
| * If prom_memory_limit is set we reduce the upper limits *except* for |
| * alloc_top_high. This must be the real top of RAM so we can put |
| * TCE's up there. |
| */ |
| |
| alloc_top_high = ram_top; |
| |
| if (prom_memory_limit) { |
| if (prom_memory_limit <= alloc_bottom) { |
| prom_printf("Ignoring mem=%lx <= alloc_bottom.\n", |
| prom_memory_limit); |
| prom_memory_limit = 0; |
| } else if (prom_memory_limit >= ram_top) { |
| prom_printf("Ignoring mem=%lx >= ram_top.\n", |
| prom_memory_limit); |
| prom_memory_limit = 0; |
| } else { |
| ram_top = prom_memory_limit; |
| rmo_top = min(rmo_top, prom_memory_limit); |
| } |
| } |
| |
| /* |
| * Setup our top alloc point, that is top of RMO or top of |
| * segment 0 when running non-LPAR. |
| * Some RS64 machines have buggy firmware where claims up at |
| * 1GB fail. Cap at 768MB as a workaround. |
| * Since 768MB is plenty of room, and we need to cap to something |
| * reasonable on 32-bit, cap at 768MB on all machines. |
| */ |
| if (!rmo_top) |
| rmo_top = ram_top; |
| rmo_top = min(0x30000000ul, rmo_top); |
| alloc_top = rmo_top; |
| alloc_top_high = ram_top; |
| |
| /* |
| * Check if we have an initrd after the kernel but still inside |
| * the RMO. If we do move our bottom point to after it. |
| */ |
| if (prom_initrd_start && |
| prom_initrd_start < rmo_top && |
| prom_initrd_end > alloc_bottom) |
| alloc_bottom = PAGE_ALIGN(prom_initrd_end); |
| |
| prom_printf("memory layout at init:\n"); |
| prom_printf(" memory_limit : %lx (16 MB aligned)\n", |
| prom_memory_limit); |
| prom_printf(" alloc_bottom : %lx\n", alloc_bottom); |
| prom_printf(" alloc_top : %lx\n", alloc_top); |
| prom_printf(" alloc_top_hi : %lx\n", alloc_top_high); |
| prom_printf(" rmo_top : %lx\n", rmo_top); |
| prom_printf(" ram_top : %lx\n", ram_top); |
| } |
| |
| static void __init prom_close_stdin(void) |
| { |
| __be32 val; |
| ihandle stdin; |
| |
| if (prom_getprop(prom.chosen, "stdin", &val, sizeof(val)) > 0) { |
| stdin = be32_to_cpu(val); |
| call_prom("close", 1, 0, stdin); |
| } |
| } |
| |
| #ifdef CONFIG_PPC_SVM |
| static int prom_rtas_hcall(uint64_t args) |
| { |
| register uint64_t arg1 asm("r3") = H_RTAS; |
| register uint64_t arg2 asm("r4") = args; |
| |
| asm volatile("sc 1\n" : "=r" (arg1) : |
| "r" (arg1), |
| "r" (arg2) :); |
| srr_regs_clobbered(); |
| |
| return arg1; |
| } |
| |
| static struct rtas_args __prombss os_term_args; |
| |
| static void __init prom_rtas_os_term(char *str) |
| { |
| phandle rtas_node; |
| __be32 val; |
| u32 token; |
| |
| prom_debug("%s: start...\n", __func__); |
| rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); |
| prom_debug("rtas_node: %x\n", rtas_node); |
| if (!PHANDLE_VALID(rtas_node)) |
| return; |
| |
| val = 0; |
| prom_getprop(rtas_node, "ibm,os-term", &val, sizeof(val)); |
| token = be32_to_cpu(val); |
| prom_debug("ibm,os-term: %x\n", token); |
| if (token == 0) |
| prom_panic("Could not get token for ibm,os-term\n"); |
| os_term_args.token = cpu_to_be32(token); |
| os_term_args.nargs = cpu_to_be32(1); |
| os_term_args.nret = cpu_to_be32(1); |
| os_term_args.args[0] = cpu_to_be32(__pa(str)); |
| prom_rtas_hcall((uint64_t)&os_term_args); |
| } |
| #endif /* CONFIG_PPC_SVM */ |
| |
| /* |
| * Allocate room for and instantiate RTAS |
| */ |
| static void __init prom_instantiate_rtas(void) |
| { |
| phandle rtas_node; |
| ihandle rtas_inst; |
| u32 base, entry = 0; |
| __be32 val; |
| u32 size = 0; |
| |
| prom_debug("prom_instantiate_rtas: start...\n"); |
| |
| rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); |
| prom_debug("rtas_node: %x\n", rtas_node); |
| if (!PHANDLE_VALID(rtas_node)) |
| return; |
| |
| val = 0; |
| prom_getprop(rtas_node, "rtas-size", &val, sizeof(size)); |
| size = be32_to_cpu(val); |
| if (size == 0) |
| return; |
| |
| base = alloc_down(size, PAGE_SIZE, 0); |
| if (base == 0) |
| prom_panic("Could not allocate memory for RTAS\n"); |
| |
| rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); |
| if (!IHANDLE_VALID(rtas_inst)) { |
| prom_printf("opening rtas package failed (%x)\n", rtas_inst); |
| return; |
| } |
| |
| prom_printf("instantiating rtas at 0x%x...", base); |
| |
| if (call_prom_ret("call-method", 3, 2, &entry, |
| ADDR("instantiate-rtas"), |
| rtas_inst, base) != 0 |
| || entry == 0) { |
| prom_printf(" failed\n"); |
| return; |
| } |
| prom_printf(" done\n"); |
| |
| reserve_mem(base, size); |
| |
| val = cpu_to_be32(base); |
| prom_setprop(rtas_node, "/rtas", "linux,rtas-base", |
| &val, sizeof(val)); |
| val = cpu_to_be32(entry); |
| prom_setprop(rtas_node, "/rtas", "linux,rtas-entry", |
| &val, sizeof(val)); |
| |
| /* Check if it supports "query-cpu-stopped-state" */ |
| if (prom_getprop(rtas_node, "query-cpu-stopped-state", |
| &val, sizeof(val)) != PROM_ERROR) |
| rtas_has_query_cpu_stopped = true; |
| |
| prom_debug("rtas base = 0x%x\n", base); |
| prom_debug("rtas entry = 0x%x\n", entry); |
| prom_debug("rtas size = 0x%x\n", size); |
| |
| prom_debug("prom_instantiate_rtas: end...\n"); |
| } |
| |
| #ifdef CONFIG_PPC64 |
| /* |
| * Allocate room for and instantiate Stored Measurement Log (SML) |
| */ |
| static void __init prom_instantiate_sml(void) |
| { |
| phandle ibmvtpm_node; |
| ihandle ibmvtpm_inst; |
| u32 entry = 0, size = 0, succ = 0; |
| u64 base; |
| __be32 val; |
| |
| prom_debug("prom_instantiate_sml: start...\n"); |
| |
| ibmvtpm_node = call_prom("finddevice", 1, 1, ADDR("/vdevice/vtpm")); |
| prom_debug("ibmvtpm_node: %x\n", ibmvtpm_node); |
| if (!PHANDLE_VALID(ibmvtpm_node)) |
| return; |
| |
| ibmvtpm_inst = call_prom("open", 1, 1, ADDR("/vdevice/vtpm")); |
| if (!IHANDLE_VALID(ibmvtpm_inst)) { |
| prom_printf("opening vtpm package failed (%x)\n", ibmvtpm_inst); |
| return; |
| } |
| |
| if (prom_getprop(ibmvtpm_node, "ibm,sml-efi-reformat-supported", |
| &val, sizeof(val)) != PROM_ERROR) { |
| if (call_prom_ret("call-method", 2, 2, &succ, |
| ADDR("reformat-sml-to-efi-alignment"), |
| ibmvtpm_inst) != 0 || succ == 0) { |
| prom_printf("Reformat SML to EFI alignment failed\n"); |
| return; |
| } |
| |
| if (call_prom_ret("call-method", 2, 2, &size, |
| ADDR("sml-get-allocated-size"), |
| ibmvtpm_inst) != 0 || size == 0) { |
| prom_printf("SML get allocated size failed\n"); |
| return; |
| } |
| } else { |
| if (call_prom_ret("call-method", 2, 2, &size, |
| ADDR("sml-get-handover-size"), |
| ibmvtpm_inst) != 0 || size == 0) { |
| prom_printf("SML get handover size failed\n"); |
| return; |
| } |
| } |
| |
| base = alloc_down(size, PAGE_SIZE, 0); |
| if (base == 0) |
| prom_panic("Could not allocate memory for sml\n"); |
| |
| prom_printf("instantiating sml at 0x%llx...", base); |
| |
| memset((void *)base, 0, size); |
| |
| if (call_prom_ret("call-method", 4, 2, &entry, |
| ADDR("sml-handover"), |
| ibmvtpm_inst, size, base) != 0 || entry == 0) { |
| prom_printf("SML handover failed\n"); |
| return; |
| } |
| prom_printf(" done\n"); |
| |
| reserve_mem(base, size); |
| |
| prom_setprop(ibmvtpm_node, "/vdevice/vtpm", "linux,sml-base", |
| &base, sizeof(base)); |
| prom_setprop(ibmvtpm_node, "/vdevice/vtpm", "linux,sml-size", |
| &size, sizeof(size)); |
| |
| prom_debug("sml base = 0x%llx\n", base); |
| prom_debug("sml size = 0x%x\n", size); |
| |
| prom_debug("prom_instantiate_sml: end...\n"); |
| } |
| |
| /* |
| * Allocate room for and initialize TCE tables |
| */ |
| #ifdef __BIG_ENDIAN__ |
| static void __init prom_initialize_tce_table(void) |
| { |
| phandle node; |
| ihandle phb_node; |
| char compatible[64], type[64], model[64]; |
| char *path = prom_scratch; |
| u64 base, align; |
| u32 minalign, minsize; |
| u64 tce_entry, *tce_entryp; |
| u64 local_alloc_top, local_alloc_bottom; |
| u64 i; |
| |
| if (prom_iommu_off) |
| return; |
| |
| prom_debug("starting prom_initialize_tce_table\n"); |
| |
| /* Cache current top of allocs so we reserve a single block */ |
| local_alloc_top = alloc_top_high; |
| local_alloc_bottom = local_alloc_top; |
| |
| /* Search all nodes looking for PHBs. */ |
| for (node = 0; prom_next_node(&node); ) { |
| compatible[0] = 0; |
| type[0] = 0; |
| model[0] = 0; |
| prom_getprop(node, "compatible", |
| compatible, sizeof(compatible)); |
| prom_getprop(node, "device_type", type, sizeof(type)); |
| prom_getprop(node, "model", model, sizeof(model)); |
| |
| if ((type[0] == 0) || (prom_strstr(type, "pci") == NULL)) |
| continue; |
| |
| /* Keep the old logic intact to avoid regression. */ |
| if (compatible[0] != 0) { |
| if ((prom_strstr(compatible, "python") == NULL) && |
| (prom_strstr(compatible, "Speedwagon") == NULL) && |
| (prom_strstr(compatible, "Winnipeg") == NULL)) |
| continue; |
| } else if (model[0] != 0) { |
| if ((prom_strstr(model, "ython") == NULL) && |
| (prom_strstr(model, "peedwagon") == NULL) && |
| (prom_strstr(model, "innipeg") == NULL)) |
| continue; |
| } |
| |
| if (prom_getprop(node, "tce-table-minalign", &minalign, |
| sizeof(minalign)) == PROM_ERROR) |
| minalign = 0; |
| if (prom_getprop(node, "tce-table-minsize", &minsize, |
| sizeof(minsize)) == PROM_ERROR) |
| minsize = 4UL << 20; |
| |
| /* |
| * Even though we read what OF wants, we just set the table |
| * size to 4 MB. This is enough to map 2GB of PCI DMA space. |
| * By doing this, we avoid the pitfalls of trying to DMA to |
| * MMIO space and the DMA alias hole. |
| */ |
| minsize = 4UL << 20; |
| |
| /* Align to the greater of the align or size */ |
| align = max(minalign, minsize); |
| base = alloc_down(minsize, align, 1); |
| if (base == 0) |
| prom_panic("ERROR, cannot find space for TCE table.\n"); |
| if (base < local_alloc_bottom) |
| local_alloc_bottom = base; |
| |
| /* It seems OF doesn't null-terminate the path :-( */ |
| memset(path, 0, sizeof(prom_scratch)); |
| /* Call OF to setup the TCE hardware */ |
| if (call_prom("package-to-path", 3, 1, node, |
| path, sizeof(prom_scratch) - 1) == PROM_ERROR) { |
| prom_printf("package-to-path failed\n"); |
| } |
| |
| /* Save away the TCE table attributes for later use. */ |
| prom_setprop(node, path, "linux,tce-base", &base, sizeof(base)); |
| prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize)); |
| |
| prom_debug("TCE table: %s\n", path); |
| prom_debug("\tnode = 0x%x\n", node); |
| prom_debug("\tbase = 0x%llx\n", base); |
| prom_debug("\tsize = 0x%x\n", minsize); |
| |
| /* Initialize the table to have a one-to-one mapping |
| * over the allocated size. |
| */ |
| tce_entryp = (u64 *)base; |
| for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) { |
| tce_entry = (i << PAGE_SHIFT); |
| tce_entry |= 0x3; |
| *tce_entryp = tce_entry; |
| } |
| |
| prom_printf("opening PHB %s", path); |
| phb_node = call_prom("open", 1, 1, path); |
| if (phb_node == 0) |
| prom_printf("... failed\n"); |
| else |
| prom_printf("... done\n"); |
| |
| call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"), |
| phb_node, -1, minsize, |
| (u32) base, (u32) (base >> 32)); |
| call_prom("close", 1, 0, phb_node); |
| } |
| |
| reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom); |
| |
| /* These are only really needed if there is a memory limit in |
| * effect, but we don't know so export them always. */ |
| prom_tce_alloc_start = local_alloc_bottom; |
| prom_tce_alloc_end = local_alloc_top; |
| |
| /* Flag the first invalid entry */ |
| prom_debug("ending prom_initialize_tce_table\n"); |
| } |
| #endif /* __BIG_ENDIAN__ */ |
| #endif /* CONFIG_PPC64 */ |
| |
| /* |
| * With CHRP SMP we need to use the OF to start the other processors. |
| * We can't wait until smp_boot_cpus (the OF is trashed by then) |
| * so we have to put the processors into a holding pattern controlled |
| * by the kernel (not OF) before we destroy the OF. |
| * |
| * This uses a chunk of low memory, puts some holding pattern |
| * code there and sends the other processors off to there until |
| * smp_boot_cpus tells them to do something. The holding pattern |
| * checks that address until its cpu # is there, when it is that |
| * cpu jumps to __secondary_start(). smp_boot_cpus() takes care |
| * of setting those values. |
| * |
| * We also use physical address 0x4 here to tell when a cpu |
| * is in its holding pattern code. |
| * |
| * -- Cort |
| */ |
| /* |
| * We want to reference the copy of __secondary_hold_* in the |
| * 0 - 0x100 address range |
| */ |
| #define LOW_ADDR(x) (((unsigned long) &(x)) & 0xff) |
| |
| static void __init prom_hold_cpus(void) |
| { |
| unsigned long i; |
| phandle node; |
| char type[64]; |
| unsigned long *spinloop |
| = (void *) LOW_ADDR(__secondary_hold_spinloop); |
| unsigned long *acknowledge |
| = (void *) LOW_ADDR(__secondary_hold_acknowledge); |
| unsigned long secondary_hold = LOW_ADDR(__secondary_hold); |
| |
| /* |
| * On pseries, if RTAS supports "query-cpu-stopped-state", |
| * we skip this stage, the CPUs will be started by the |
| * kernel using RTAS. |
| */ |
| if ((of_platform == PLATFORM_PSERIES || |
| of_platform == PLATFORM_PSERIES_LPAR) && |
| rtas_has_query_cpu_stopped) { |
| prom_printf("prom_hold_cpus: skipped\n"); |
| return; |
| } |
| |
| prom_debug("prom_hold_cpus: start...\n"); |
| prom_debug(" 1) spinloop = 0x%lx\n", (unsigned long)spinloop); |
| prom_debug(" 1) *spinloop = 0x%lx\n", *spinloop); |
| prom_debug(" 1) acknowledge = 0x%lx\n", |
| (unsigned long)acknowledge); |
| prom_debug(" 1) *acknowledge = 0x%lx\n", *acknowledge); |
| prom_debug(" 1) secondary_hold = 0x%lx\n", secondary_hold); |
| |
| /* Set the common spinloop variable, so all of the secondary cpus |
| * will block when they are awakened from their OF spinloop. |
| * This must occur for both SMP and non SMP kernels, since OF will |
| * be trashed when we move the kernel. |
| */ |
| *spinloop = 0; |
| |
| /* look for cpus */ |
| for (node = 0; prom_next_node(&node); ) { |
| unsigned int cpu_no; |
| __be32 reg; |
| |
| type[0] = 0; |
| prom_getprop(node, "device_type", type, sizeof(type)); |
| if (prom_strcmp(type, "cpu") != 0) |
| continue; |
| |
| /* Skip non-configured cpus. */ |
| if (prom_getprop(node, "status", type, sizeof(type)) > 0) |
| if (prom_strcmp(type, "okay") != 0) |
| continue; |
| |
| reg = cpu_to_be32(-1); /* make sparse happy */ |
| prom_getprop(node, "reg", ®, sizeof(reg)); |
| cpu_no = be32_to_cpu(reg); |
| |
| prom_debug("cpu hw idx = %u\n", cpu_no); |
| |
| /* Init the acknowledge var which will be reset by |
| * the secondary cpu when it awakens from its OF |
| * spinloop. |
| */ |
| *acknowledge = (unsigned long)-1; |
| |
| if (cpu_no != prom.cpu) { |
| /* Primary Thread of non-boot cpu or any thread */ |
| prom_printf("starting cpu hw idx %u... ", cpu_no); |
| call_prom("start-cpu", 3, 0, node, |
| secondary_hold, cpu_no); |
| |
| for (i = 0; (i < 100000000) && |
| (*acknowledge == ((unsigned long)-1)); i++ ) |
| mb(); |
| |
| if (*acknowledge == cpu_no) |
| prom_printf("done\n"); |
| else |
| prom_printf("failed: %lx\n", *acknowledge); |
| } |
| #ifdef CONFIG_SMP |
| else |
| prom_printf("boot cpu hw idx %u\n", cpu_no); |
| #endif /* CONFIG_SMP */ |
| } |
| |
| prom_debug("prom_hold_cpus: end...\n"); |
| } |
| |
| |
| static void __init prom_init_client_services(unsigned long pp) |
| { |
| /* Get a handle to the prom entry point before anything else */ |
| prom_entry = pp; |
| |
| /* get a handle for the stdout device */ |
| prom.chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); |
| if (!PHANDLE_VALID(prom.chosen)) |
| prom_panic("cannot find chosen"); /* msg won't be printed :( */ |
| |
| /* get device tree root */ |
| prom.root = call_prom("finddevice", 1, 1, ADDR("/")); |
| if (!PHANDLE_VALID(prom.root)) |
| prom_panic("cannot find device tree root"); /* msg won't be printed :( */ |
| |
| prom.mmumap = 0; |
| } |
| |
| #ifdef CONFIG_PPC32 |
| /* |
| * For really old powermacs, we need to map things we claim. |
| * For that, we need the ihandle of the mmu. |
| * Also, on the longtrail, we need to work around other bugs. |
| */ |
| static void __init prom_find_mmu(void) |
| { |
| phandle oprom; |
| char version[64]; |
| |
| oprom = call_prom("finddevice", 1, 1, ADDR("/openprom")); |
| if (!PHANDLE_VALID(oprom)) |
| return; |
| if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0) |
| return; |
| version[sizeof(version) - 1] = 0; |
| /* XXX might need to add other versions here */ |
| if (prom_strcmp(version, "Open Firmware, 1.0.5") == 0) |
| of_workarounds = OF_WA_CLAIM; |
| else if (prom_strncmp(version, "FirmWorks,3.", 12) == 0) { |
| of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL; |
| call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim"); |
| } else |
| return; |
| prom.memory = call_prom("open", 1, 1, ADDR("/memory")); |
| prom_getprop(prom.chosen, "mmu", &prom.mmumap, |
| sizeof(prom.mmumap)); |
| prom.mmumap = be32_to_cpu(prom.mmumap); |
| if (!IHANDLE_VALID(prom.memory) || !IHANDLE_VALID(prom.mmumap)) |
| of_workarounds &= ~OF_WA_CLAIM; /* hmmm */ |
| } |
| #else |
| #define prom_find_mmu() |
| #endif |
| |
| static void __init prom_init_stdout(void) |
| { |
| char *path = of_stdout_device; |
| char type[16]; |
| phandle stdout_node; |
| __be32 val; |
| |
| if (prom_getprop(prom.chosen, "stdout", &val, sizeof(val)) <= 0) |
| prom_panic("cannot find stdout"); |
| |
| prom.stdout = be32_to_cpu(val); |
| |
| /* Get the full OF pathname of the stdout device */ |
| memset(path, 0, 256); |
| call_prom("instance-to-path", 3, 1, prom.stdout, path, 255); |
| prom_printf("OF stdout device is: %s\n", of_stdout_device); |
| prom_setprop(prom.chosen, "/chosen", "linux,stdout-path", |
| path, prom_strlen(path) + 1); |
| |
| /* instance-to-package fails on PA-Semi */ |
| stdout_node = call_prom("instance-to-package", 1, 1, prom.stdout); |
| if (stdout_node != PROM_ERROR) { |
| val = cpu_to_be32(stdout_node); |
| |
| /* If it's a display, note it */ |
| memset(type, 0, sizeof(type)); |
| prom_getprop(stdout_node, "device_type", type, sizeof(type)); |
| if (prom_strcmp(type, "display") == 0) |
| prom_setprop(stdout_node, path, "linux,boot-display", NULL, 0); |
| } |
| } |
| |
| static int __init prom_find_machine_type(void) |
| { |
| char compat[256]; |
| int len, i = 0; |
| #ifdef CONFIG_PPC64 |
| phandle rtas; |
| int x; |
| #endif |
| |
| /* Look for a PowerMac or a Cell */ |
| len = prom_getprop(prom.root, "compatible", |
| compat, sizeof(compat)-1); |
| if (len > 0) { |
| compat[len] = 0; |
| while (i < len) { |
| char *p = &compat[i]; |
| int sl = prom_strlen(p); |
| if (sl == 0) |
| break; |
| if (prom_strstr(p, "Power Macintosh") || |
| prom_strstr(p, "MacRISC")) |
| return PLATFORM_POWERMAC; |
| #ifdef CONFIG_PPC64 |
| /* We must make sure we don't detect the IBM Cell |
| * blades as pSeries due to some firmware issues, |
| * so we do it here. |
| */ |
| if (prom_strstr(p, "IBM,CBEA") || |
| prom_strstr(p, "IBM,CPBW-1.0")) |
| return PLATFORM_GENERIC; |
| #endif /* CONFIG_PPC64 */ |
| i += sl + 1; |
| } |
| } |
| #ifdef CONFIG_PPC64 |
| /* Try to figure out if it's an IBM pSeries or any other |
| * PAPR compliant platform. We assume it is if : |
| * - /device_type is "chrp" (please, do NOT use that for future |
| * non-IBM designs ! |
| * - it has /rtas |
| */ |
| len = prom_getprop(prom.root, "device_type", |
| compat, sizeof(compat)-1); |
| if (len <= 0) |
| return PLATFORM_GENERIC; |
| if (prom_strcmp(compat, "chrp")) |
| return PLATFORM_GENERIC; |
| |
| /* Default to pSeries. We need to know if we are running LPAR */ |
| rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); |
| if (!PHANDLE_VALID(rtas)) |
| return PLATFORM_GENERIC; |
| x = prom_getproplen(rtas, "ibm,hypertas-functions"); |
| if (x != PROM_ERROR) { |
| prom_debug("Hypertas detected, assuming LPAR !\n"); |
| return PLATFORM_PSERIES_LPAR; |
| } |
| return PLATFORM_PSERIES; |
| #else |
| return PLATFORM_GENERIC; |
| #endif |
| } |
| |
| static int __init prom_set_color(ihandle ih, int i, int r, int g, int b) |
| { |
| return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r); |
| } |
| |
| /* |
| * If we have a display that we don't know how to drive, |
| * we will want to try to execute OF's open method for it |
| * later. However, OF will probably fall over if we do that |
| * we've taken over the MMU. |
| * So we check whether we will need to open the display, |
| * and if so, open it now. |
| */ |
| static void __init prom_check_displays(void) |
| { |
| char type[16], *path; |
| phandle node; |
| ihandle ih; |
| int i; |
| |
| static const unsigned char default_colors[] __initconst = { |
| 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0xaa, |
| 0x00, 0xaa, 0x00, |
| 0x00, 0xaa, 0xaa, |
| 0xaa, 0x00, 0x00, |
| 0xaa, 0x00, 0xaa, |
| 0xaa, 0xaa, 0x00, |
| 0xaa, 0xaa, 0xaa, |
| 0x55, 0x55, 0x55, |
| 0x55, 0x55, 0xff, |
| 0x55, 0xff, 0x55, |
| 0x55, 0xff, 0xff, |
| 0xff, 0x55, 0x55, |
| 0xff, 0x55, 0xff, |
| 0xff, 0xff, 0x55, |
| 0xff, 0xff, 0xff |
| }; |
| const unsigned char *clut; |
| |
| prom_debug("Looking for displays\n"); |
| for (node = 0; prom_next_node(&node); ) { |
| memset(type, 0, sizeof(type)); |
| prom_getprop(node, "device_type", type, sizeof(type)); |
| if (prom_strcmp(type, "display") != 0) |
| continue; |
| |
| /* It seems OF doesn't null-terminate the path :-( */ |
| path = prom_scratch; |
| memset(path, 0, sizeof(prom_scratch)); |
| |
| /* |
| * leave some room at the end of the path for appending extra |
| * arguments |
| */ |
| if (call_prom("package-to-path", 3, 1, node, path, |
| sizeof(prom_scratch) - 10) == PROM_ERROR) |
| continue; |
| prom_printf("found display : %s, opening... ", path); |
| |
| ih = call_prom("open", 1, 1, path); |
| if (ih == 0) { |
| prom_printf("failed\n"); |
| continue; |
| } |
| |
| /* Success */ |
| prom_printf("done\n"); |
| prom_setprop(node, path, "linux,opened", NULL, 0); |
| |
| /* Setup a usable color table when the appropriate |
| * method is available. Should update this to set-colors */ |
| clut = default_colors; |
| for (i = 0; i < 16; i++, clut += 3) |
| if (prom_set_color(ih, i, clut[0], clut[1], |
| clut[2]) != 0) |
| break; |
| |
| #ifdef CONFIG_LOGO_LINUX_CLUT224 |
| clut = PTRRELOC(logo_linux_clut224.clut); |
| for (i = 0; i < logo_linux_clut224.clutsize; i++, clut += 3) |
| if (prom_set_color(ih, i + 32, clut[0], clut[1], |
| clut[2]) != 0) |
| break; |
| #endif /* CONFIG_LOGO_LINUX_CLUT224 */ |
| |
| #ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX |
| if (prom_getprop(node, "linux,boot-display", NULL, 0) != |
| PROM_ERROR) { |
| u32 width, height, pitch, addr; |
| |
| prom_printf("Setting btext !\n"); |
| |
| if (prom_getprop(node, "width", &width, 4) == PROM_ERROR) |
| return; |
| |
| if (prom_getprop(node, "height", &height, 4) == PROM_ERROR) |
| return; |
| |
| if (prom_getprop(node, "linebytes", &pitch, 4) == PROM_ERROR) |
| return; |
| |
| if (prom_getprop(node, "address", &addr, 4) == PROM_ERROR) |
| return; |
| |
| prom_printf("W=%d H=%d LB=%d addr=0x%x\n", |
| width, height, pitch, addr); |
| btext_setup_display(width, height, 8, pitch, addr); |
| btext_prepare_BAT(); |
| } |
| #endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */ |
| } |
| } |
| |
| |
| /* Return (relocated) pointer to this much memory: moves initrd if reqd. */ |
| static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, |
| unsigned long needed, unsigned long align) |
| { |
| void *ret; |
| |
| *mem_start = ALIGN(*mem_start, align); |
| while ((*mem_start + needed) > *mem_end) { |
| unsigned long room, chunk; |
| |
| prom_debug("Chunk exhausted, claiming more at %lx...\n", |
| alloc_bottom); |
| room = alloc_top - alloc_bottom; |
| if (room > DEVTREE_CHUNK_SIZE) |
| room = DEVTREE_CHUNK_SIZE; |
| if (room < PAGE_SIZE) |
| prom_panic("No memory for flatten_device_tree " |
| "(no room)\n"); |
| chunk = alloc_up(room, 0); |
| if (chunk == 0) |
| prom_panic("No memory for flatten_device_tree " |
| "(claim failed)\n"); |
| *mem_end = chunk + room; |
| } |
| |
| ret = (void *)*mem_start; |
| *mem_start += needed; |
| |
| return ret; |
| } |
| |
| #define dt_push_token(token, mem_start, mem_end) do { \ |
| void *room = make_room(mem_start, mem_end, 4, 4); \ |
| *(__be32 *)room = cpu_to_be32(token); \ |
| } while(0) |
| |
| static unsigned long __init dt_find_string(char *str) |
| { |
| char *s, *os; |
| |
| s = os = (char *)dt_string_start; |
| s += 4; |
| while (s < (char *)dt_string_end) { |
| if (prom_strcmp(s, str) == 0) |
| return s - os; |
| s += prom_strlen(s) + 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * The Open Firmware 1275 specification states properties must be 31 bytes or |
| * less, however not all firmwares obey this. Make it 64 bytes to be safe. |
| */ |
| #define MAX_PROPERTY_NAME 64 |
| |
| static void __init scan_dt_build_strings(phandle node, |
| unsigned long *mem_start, |
| unsigned long *mem_end) |
| { |
| char *prev_name, *namep, *sstart; |
| unsigned long soff; |
| phandle child; |
| |
| sstart = (char *)dt_string_start; |
| |
| /* get and store all property names */ |
| prev_name = ""; |
| for (;;) { |
| /* 64 is max len of name including nul. */ |
| namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); |
| if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) { |
| /* No more nodes: unwind alloc */ |
| *mem_start = (unsigned long)namep; |
| break; |
| } |
| |
| /* skip "name" */ |
| if (prom_strcmp(namep, "name") == 0) { |
| *mem_start = (unsigned long)namep; |
| prev_name = "name"; |
| continue; |
| } |
| /* get/create string entry */ |
| soff = dt_find_string(namep); |
| if (soff != 0) { |
| *mem_start = (unsigned long)namep; |
| namep = sstart + soff; |
| } else { |
| /* Trim off some if we can */ |
| *mem_start = (unsigned long)namep + prom_strlen(namep) + 1; |
| dt_string_end = *mem_start; |
| } |
| prev_name = namep; |
| } |
| |
| /* do all our children */ |
| child = call_prom("child", 1, 1, node); |
| while (child != 0) { |
| scan_dt_build_strings(child, mem_start, mem_end); |
| child = call_prom("peer", 1, 1, child); |
| } |
| } |
| |
| static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, |
| unsigned long *mem_end) |
| { |
| phandle child; |
| char *namep, *prev_name, *sstart, *p, *ep, *lp, *path; |
| unsigned long soff; |
| unsigned char *valp; |
| static char pname[MAX_PROPERTY_NAME] __prombss; |
| int l, room, has_phandle = 0; |
| |
| dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end); |
| |
| /* get the node's full name */ |
| namep = (char *)*mem_start; |
| room = *mem_end - *mem_start; |
| if (room > 255) |
| room = 255; |
| l = call_prom("package-to-path", 3, 1, node, namep, room); |
| if (l >= 0) { |
| /* Didn't fit? Get more room. */ |
| if (l >= room) { |
| if (l >= *mem_end - *mem_start) |
| namep = make_room(mem_start, mem_end, l+1, 1); |
| call_prom("package-to-path", 3, 1, node, namep, l); |
| } |
| namep[l] = '\0'; |
| |
| /* Fixup an Apple bug where they have bogus \0 chars in the |
| * middle of the path in some properties, and extract |
| * the unit name (everything after the last '/'). |
| */ |
| for (lp = p = namep, ep = namep + l; p < ep; p++) { |
| if (*p == '/') |
| lp = namep; |
| else if (*p != 0) |
| *lp++ = *p; |
| } |
| *lp = 0; |
| *mem_start = ALIGN((unsigned long)lp + 1, 4); |
| } |
| |
| /* get it again for debugging */ |
| path = prom_scratch; |
| memset(path, 0, sizeof(prom_scratch)); |
| call_prom("package-to-path", 3, 1, node, path, sizeof(prom_scratch) - 1); |
| |
| /* get and store all properties */ |
| prev_name = ""; |
| sstart = (char *)dt_string_start; |
| for (;;) { |
| if (call_prom("nextprop", 3, 1, node, prev_name, |
| pname) != 1) |
| break; |
| |
| /* skip "name" */ |
| if (prom_strcmp(pname, "name") == 0) { |
| prev_name = "name"; |
| continue; |
| } |
| |
| /* find string offset */ |
| soff = dt_find_string(pname); |
| if (soff == 0) { |
| prom_printf("WARNING: Can't find string index for" |
| " <%s>, node %s\n", pname, path); |
| break; |
| } |
| prev_name = sstart + soff; |
| |
| /* get length */ |
| l = call_prom("getproplen", 2, 1, node, pname); |
| |
| /* sanity checks */ |
| if (l == PROM_ERROR) |
| continue; |
| |
| /* push property head */ |
| dt_push_token(OF_DT_PROP, mem_start, mem_end); |
| dt_push_token(l, mem_start, mem_end); |
| dt_push_token(soff, mem_start, mem_end); |
| |
| /* push property content */ |
| valp = make_room(mem_start, mem_end, l, 4); |
| call_prom("getprop", 4, 1, node, pname, valp, l); |
| *mem_start = ALIGN(*mem_start, 4); |
| |
| if (!prom_strcmp(pname, "phandle")) |
| has_phandle = 1; |
| } |
| |
| /* Add a "phandle" property if none already exist */ |
| if (!has_phandle) { |
| soff = dt_find_string("phandle"); |
| if (soff == 0) |
| prom_printf("WARNING: Can't find string index for <phandle> node %s\n", path); |
| else { |
| dt_push_token(OF_DT_PROP, mem_start, mem_end); |
| dt_push_token(4, mem_start, mem_end); |
| dt_push_token(soff, mem_start, mem_end); |
| valp = make_room(mem_start, mem_end, 4, 4); |
| *(__be32 *)valp = cpu_to_be32(node); |
| } |
| } |
| |
| /* do all our children */ |
| child = call_prom("child", 1, 1, node); |
| while (child != 0) { |
| scan_dt_build_struct(child, mem_start, mem_end); |
| child = call_prom("peer", 1, 1, child); |
| } |
| |
| dt_push_token(OF_DT_END_NODE, mem_start, mem_end); |
| } |
| |
| static void __init flatten_device_tree(void) |
| { |
| phandle root; |
| unsigned long mem_start, mem_end, room; |
| struct boot_param_header *hdr; |
| char *namep; |
| u64 *rsvmap; |
| |
| /* |
| * Check how much room we have between alloc top & bottom (+/- a |
| * few pages), crop to 1MB, as this is our "chunk" size |
| */ |
| room = alloc_top - alloc_bottom - 0x4000; |
| if (room > DEVTREE_CHUNK_SIZE) |
| room = DEVTREE_CHUNK_SIZE; |
| prom_debug("starting device tree allocs at %lx\n", alloc_bottom); |
| |
| /* Now try to claim that */ |
| mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); |
| if (mem_start == 0) |
| prom_panic("Can't allocate initial device-tree chunk\n"); |
| mem_end = mem_start + room; |
| |
| /* Get root of tree */ |
| root = call_prom("peer", 1, 1, (phandle)0); |
| if (root == (phandle)0) |
| prom_panic ("couldn't get device tree root\n"); |
| |
| /* Build header and make room for mem rsv map */ |
| mem_start = ALIGN(mem_start, 4); |
| hdr = make_room(&mem_start, &mem_end, |
| sizeof(struct boot_param_header), 4); |
| dt_header_start = (unsigned long)hdr; |
| rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8); |
| |
| /* Start of strings */ |
| mem_start = PAGE_ALIGN(mem_start); |
| dt_string_start = mem_start; |
| mem_start += 4; /* hole */ |
| |
| /* Add "phandle" in there, we'll need it */ |
| namep = make_room(&mem_start, &mem_end, 16, 1); |
| prom_strscpy_pad(namep, "phandle", sizeof("phandle")); |
| mem_start = (unsigned long)namep + prom_strlen(namep) + 1; |
| |
| /* Build string array */ |
| prom_printf("Building dt strings...\n"); |
| scan_dt_build_strings(root, &mem_start, &mem_end); |
| dt_string_end = mem_start; |
| |
| /* Build structure */ |
| mem_start = PAGE_ALIGN(mem_start); |
| dt_struct_start = mem_start; |
| prom_printf("Building dt structure...\n"); |
| scan_dt_build_struct(root, &mem_start, &mem_end); |
| dt_push_token(OF_DT_END, &mem_start, &mem_end); |
| dt_struct_end = PAGE_ALIGN(mem_start); |
| |
| /* Finish header */ |
| hdr->boot_cpuid_phys = cpu_to_be32(prom.cpu); |
| hdr->magic = cpu_to_be32(OF_DT_HEADER); |
| hdr->totalsize = cpu_to_be32(dt_struct_end - dt_header_start); |
| hdr->off_dt_struct = cpu_to_be32(dt_struct_start - dt_header_start); |
| hdr->off_dt_strings = cpu_to_be32(dt_string_start - dt_header_start); |
| hdr->dt_strings_size = cpu_to_be32(dt_string_end - dt_string_start); |
| hdr->off_mem_rsvmap = cpu_to_be32(((unsigned long)rsvmap) - dt_header_start); |
| hdr->version = cpu_to_be32(OF_DT_VERSION); |
| /* Version 16 is not backward compatible */ |
| hdr->last_comp_version = cpu_to_be32(0x10); |
| |
| /* Copy the reserve map in */ |
| memcpy(rsvmap, mem_reserve_map, sizeof(mem_reserve_map)); |
| |
| #ifdef DEBUG_PROM |
| { |
| int i; |
| prom_printf("reserved memory map:\n"); |
| for (i = 0; i < mem_reserve_cnt; i++) |
| prom_printf(" %llx - %llx\n", |
| be64_to_cpu(mem_reserve_map[i].base), |
| be64_to_cpu(mem_reserve_map[i].size)); |
| } |
| #endif |
| /* Bump mem_reserve_cnt to cause further reservations to fail |
| * since it's too late. |
| */ |
| mem_reserve_cnt = MEM_RESERVE_MAP_SIZE; |
| |
| prom_printf("Device tree strings 0x%lx -> 0x%lx\n", |
| dt_string_start, dt_string_end); |
| prom_printf("Device tree struct 0x%lx -> 0x%lx\n", |
| dt_struct_start, dt_struct_end); |
| } |
| |
| #ifdef CONFIG_PPC_MAPLE |
| /* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property. |
| * The values are bad, and it doesn't even have the right number of cells. */ |
| static void __init fixup_device_tree_maple(void) |
| { |
| phandle isa; |
| u32 rloc = 0x01002000; /* IO space; PCI device = 4 */ |
| u32 isa_ranges[6]; |
| char *name; |
| |
| name = "/ht@0/isa@4"; |
| isa = call_prom("finddevice", 1, 1, ADDR(name)); |
| if (!PHANDLE_VALID(isa)) { |
| name = "/ht@0/isa@6"; |
| isa = call_prom("finddevice", 1, 1, ADDR(name)); |
| rloc = 0x01003000; /* IO space; PCI device = 6 */ |
| } |
| if (!PHANDLE_VALID(isa)) |
| return; |
| |
| if (prom_getproplen(isa, "ranges") != 12) |
| return; |
| if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges)) |
| == PROM_ERROR) |
| return; |
| |
| if (isa_ranges[0] != 0x1 || |
| isa_ranges[1] != 0xf4000000 || |
| isa_ranges[2] != 0x00010000) |
| return; |
| |
| prom_printf("Fixing up bogus ISA range on Maple/Apache...\n"); |
| |
| isa_ranges[0] = 0x1; |
| isa_ranges[1] = 0x0; |
| isa_ranges[2] = rloc; |
| isa_ranges[3] = 0x0; |
| isa_ranges[4] = 0x0; |
| isa_ranges[5] = 0x00010000; |
| prom_setprop(isa, name, "ranges", |
| isa_ranges, sizeof(isa_ranges)); |
| } |
| |
| #define CPC925_MC_START 0xf8000000 |
| #define CPC925_MC_LENGTH 0x1000000 |
| /* The values for memory-controller don't have right number of cells */ |
| static void __init fixup_device_tree_maple_memory_controller(void) |
| { |
| phandle mc; |
| u32 mc_reg[4]; |
| char *name = "/hostbridge@f8000000"; |
| u32 ac, sc; |
| |
| mc = call_prom("finddevice", 1, 1, ADDR(name)); |
| if (!PHANDLE_VALID(mc)) |
| return; |
| |
| if (prom_getproplen(mc, "reg") != 8) |
| return; |
| |
| prom_getprop(prom.root, "#address-cells", &ac, sizeof(ac)); |
| prom_getprop(prom.root, "#size-cells", &sc, sizeof(sc)); |
| if ((ac != 2) || (sc != 2)) |
| return; |
| |
| if (prom_getprop(mc, "reg", mc_reg, sizeof(mc_reg)) == PROM_ERROR) |
| return; |
| |
| if (mc_reg[0] != CPC925_MC_START || mc_reg[1] != CPC925_MC_LENGTH) |
| return; |
| |
| prom_printf("Fixing up bogus hostbridge on Maple...\n"); |
| |
| mc_reg[0] = 0x0; |
| mc_reg[1] = CPC925_MC_START; |
| mc_reg[2] = 0x0; |
| mc_reg[3] = CPC925_MC_LENGTH; |
| prom_setprop(mc, name, "reg", mc_reg, sizeof(mc_reg)); |
| } |
| #else |
| #define fixup_device_tree_maple() |
| #define fixup_device_tree_maple_memory_controller() |
| #endif |
| |
| #ifdef CONFIG_PPC_CHRP |
| /* |
| * Pegasos and BriQ lacks the "ranges" property in the isa node |
| * Pegasos needs decimal IRQ 14/15, not hexadecimal |
| * Pegasos has the IDE configured in legacy mode, but advertised as native |
| */ |
| static void __init fixup_device_tree_chrp(void) |
| { |
| phandle ph; |
| u32 prop[6]; |
| u32 rloc = 0x01006000; /* IO space; PCI device = 12 */ |
| char *name; |
| int rc; |
| |
| name = "/pci@80000000/isa@c"; |
| ph = call_prom("finddevice", 1, 1, ADDR(name)); |
| if (!PHANDLE_VALID(ph)) { |
| name = "/pci@ff500000/isa@6"; |
| ph = call_prom("finddevice", 1, 1, ADDR(name)); |
| rloc = 0x01003000; /* IO space; PCI device = 6 */ |
| } |
| if (PHANDLE_VALID(ph)) { |
| rc = prom_getproplen(ph, "ranges"); |
| if (rc == 0 || rc == PROM_ERROR) { |
| prom_printf("Fixing up missing ISA range on Pegasos...\n"); |
| |
| prop[0] = 0x1; |
| prop[1] = 0x0; |
| prop[2] = rloc; |
| prop[3] = 0x0; |
| prop[4] = 0x0; |
| prop[5] = 0x00010000; |
| prom_setprop(ph, name, "ranges", prop, sizeof(prop)); |
| } |
| } |
| |
| name = "/pci@80000000/ide@C,1"; |
| ph = call_prom("finddevice", 1, 1, ADDR(name)); |
| if (PHANDLE_VALID(ph)) { |
| prom_printf("Fixing up IDE interrupt on Pegasos...\n"); |
| prop[0] = 14; |
| prop[1] = 0x0; |
| prom_setprop(ph, name, "interrupts", prop, 2*sizeof(u32)); |
| prom_printf("Fixing up IDE class-code on Pegasos...\n"); |
| rc = prom_getprop(ph, "class-code", prop, sizeof(u32)); |
| if (rc == sizeof(u32)) { |
| prop[0] &= ~0x5; |
| prom_setprop(ph, name, "class-code", prop, sizeof(u32)); |
| } |
| } |
| } |
| #else |
| #define fixup_device_tree_chrp() |
| #endif |
| |
| #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC) |
| static void __init fixup_device_tree_pmac(void) |
| { |
| phandle u3, i2c, mpic; |
| u32 u3_rev; |
| u32 interrupts[2]; |
| u32 parent; |
| |
| /* Some G5s have a missing interrupt definition, fix it up here */ |
| u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); |
| if (!PHANDLE_VALID(u3)) |
| return; |
| i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); |
| if (!PHANDLE_VALID(i2c)) |
| return; |
| mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); |
| if (!PHANDLE_VALID(mpic)) |
| return; |
| |
| /* check if proper rev of u3 */ |
| if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) |
| == PROM_ERROR) |
| return; |
| if (u3_rev < 0x35 || u3_rev > 0x39) |
| return; |
| /* does it need fixup ? */ |
| if (prom_getproplen(i2c, "interrupts") > 0) |
| return; |
| |
| prom_printf("fixing up bogus interrupts for u3 i2c...\n"); |
| |
| /* interrupt on this revision of u3 is number 0 and level */ |
| interrupts[0] = 0; |
| interrupts[1] = 1; |
| prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts", |
| &interrupts, sizeof(interrupts)); |
| parent = (u32)mpic; |
| prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent", |
| &parent, sizeof(parent)); |
| } |
| #else |
| #define fixup_device_tree_pmac() |
| #endif |
| |
| #ifdef CONFIG_PPC_EFIKA |
| /* |
| * The MPC5200 FEC driver requires an phy-handle property to tell it how |
| * to talk to the phy. If the phy-handle property is missing, then this |
| * function is called to add the appropriate nodes and link it to the |
| * ethernet node. |
| */ |
| static void __init fixup_device_tree_efika_add_phy(void) |
| { |
| u32 node; |
| char prop[64]; |
| int rv; |
| |
| /* Check if /builtin/ethernet exists - bail if it doesn't */ |
| node = call_prom("finddevice", 1, 1, ADDR("/builtin/ethernet")); |
| if (!PHANDLE_VALID(node)) |
| return; |
| |
| /* Check if the phy-handle property exists - bail if it does */ |
| rv = prom_getprop(node, "phy-handle", prop, sizeof(prop)); |
| if (!rv) |
| return; |
| |
| /* |
| * At this point the ethernet device doesn't have a phy described. |
| * Now we need to add the missing phy node and linkage |
| */ |
| |
| /* Check for an MDIO bus node - if missing then create one */ |
| node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio")); |
| if (!PHANDLE_VALID(node)) { |
| prom_printf("Adding Ethernet MDIO node\n"); |
| call_prom("interpret", 1, 1, |
| " s\" /builtin\" find-device" |
| " new-device" |
| " 1 encode-int s\" #address-cells\" property" |
| " 0 encode-int s\" #size-cells\" property" |
| " s\" mdio\" device-name" |
| " s\" fsl,mpc5200b-mdio\" encode-string" |
| " s\" compatible\" property" |
| " 0xf0003000 0x400 reg" |
| " 0x2 encode-int" |
| " 0x5 encode-int encode+" |
| " 0x3 encode-int encode+" |
| " s\" interrupts\" property" |
| " finish-device"); |
| } |
| |
| /* Check for a PHY device node - if missing then create one and |
| * give it's phandle to the ethernet node */ |
| node = call_prom("finddevice", 1, 1, |
| ADDR("/builtin/mdio/ethernet-phy")); |
| if (!PHANDLE_VALID(node)) { |
| prom_printf("Adding Ethernet PHY node\n"); |
| call_prom("interpret", 1, 1, |
| " s\" /builtin/mdio\" find-device" |
| " new-device" |
| " s\" ethernet-phy\" device-name" |
| " 0x10 encode-int s\" reg\" property" |
| " my-self" |
| " ihandle>phandle" |
| " finish-device" |
| " s\" /builtin/ethernet\" find-device" |
| " encode-int" |
| " s\" phy-handle\" property" |
| " device-end"); |
| } |
| } |
| |
| static void __init fixup_device_tree_efika(void) |
| { |
| int sound_irq[3] = { 2, 2, 0 }; |
| int bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0, |
| 3,4,0, 3,5,0, 3,6,0, 3,7,0, |
| 3,8,0, 3,9,0, 3,10,0, 3,11,0, |
| 3,12,0, 3,13,0, 3,14,0, 3,15,0 }; |
| u32 node; |
| char prop[64]; |
| int rv, len; |
| |
| /* Check if we're really running on a EFIKA */ |
| node = call_prom("finddevice", 1, 1, ADDR("/")); |
| if (!PHANDLE_VALID(node)) |
| return; |
| |
| rv = prom_getprop(node, "model", prop, sizeof(prop)); |
| if (rv == PROM_ERROR) |
| return; |
| if (prom_strcmp(prop, "EFIKA5K2")) |
| return; |
| |
| prom_printf("Applying EFIKA device tree fixups\n"); |
| |
| /* Claiming to be 'chrp' is death */ |
| node = call_prom("finddevice", 1, 1, ADDR("/")); |
| rv = prom_getprop(node, "device_type", prop, sizeof(prop)); |
| if (rv != PROM_ERROR && (prom_strcmp(prop, "chrp") == 0)) |
| prom_setprop(node, "/", "device_type", "efika", sizeof("efika")); |
| |
| /* CODEGEN,description is exposed in /proc/cpuinfo so |
| fix that too */ |
| rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop)); |
| if (rv != PROM_ERROR && (prom_strstr(prop, "CHRP"))) |
| prom_setprop(node, "/", "CODEGEN,description", |
| "Efika 5200B PowerPC System", |
| sizeof("Efika 5200B PowerPC System")); |
| |
| /* Fixup bestcomm interrupts property */ |
| node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm")); |
| if (PHANDLE_VALID(node)) { |
| len = prom_getproplen(node, "interrupts"); |
| if (len == 12) { |
| prom_printf("Fixing bestcomm interrupts property\n"); |
| prom_setprop(node, "/builtin/bestcom", "interrupts", |
| bcomm_irq, sizeof(bcomm_irq)); |
| } |
| } |
| |
| /* Fixup sound interrupts property */ |
| node = call_prom("finddevice", 1, 1, ADDR("/builtin/sound")); |
| if (PHANDLE_VALID(node)) { |
| rv = prom_getprop(node, "interrupts", prop, sizeof(prop)); |
| if (rv == PROM_ERROR) { |
| prom_printf("Adding sound interrupts property\n"); |
| prom_setprop(node, "/builtin/sound", "interrupts", |
| sound_irq, sizeof(sound_irq)); |
| } |
| } |
| |
| /* Make sure ethernet phy-handle property exists */ |
| fixup_device_tree_efika_add_phy(); |
| } |
| #else |
| #define fixup_device_tree_efika() |
| #endif |
| |
| #ifdef CONFIG_PPC_PASEMI_NEMO |
| /* |
| * CFE supplied on Nemo is broken in several ways, biggest |
| * problem is that it reassigns ISA interrupts to unused mpic ints. |
| * Add an interrupt-controller property for the io-bridge to use |
| * and correct the ints so we can attach them to an irq_domain |
| */ |
| static void __init fixup_device_tree_pasemi(void) |
| { |
| u32 interrupts[2], parent, rval, val = 0; |
| char *name, *pci_name; |
| phandle iob, node; |
| |
| /* Find the root pci node */ |
| name = "/pxp@0,e0000000"; |
| iob = call_prom("finddevice", 1, 1, ADDR(name)); |
| if (!PHANDLE_VALID(iob)) |
| return; |
| |
| /* check if interrupt-controller node set yet */ |
| if (prom_getproplen(iob, "interrupt-controller") !=PROM_ERROR) |
| return; |
| |
| prom_printf("adding interrupt-controller property for SB600...\n"); |
| |
| prom_setprop(iob, name, "interrupt-controller", &val, 0); |
| |
| pci_name = "/pxp@0,e0000000/pci@11"; |
| node = call_prom("finddevice", 1, 1, ADDR(pci_name)); |
| parent = ADDR(iob); |
| |
| for( ; prom_next_node(&node); ) { |
| /* scan each node for one with an interrupt */ |
| if (!PHANDLE_VALID(node)) |
| continue; |
| |
| rval = prom_getproplen(node, "interrupts"); |
| if (rval == 0 || rval == PROM_ERROR) |
| continue; |
| |
| prom_getprop(node, "interrupts", &interrupts, sizeof(interrupts)); |
| if ((interrupts[0] < 212) || (interrupts[0] > 222)) |
| continue; |
| |
| /* found a node, update both interrupts and interrupt-parent */ |
| if ((interrupts[0] >= 212) && (interrupts[0] <= 215)) |
| interrupts[0] -= 203; |
| if ((interrupts[0] >= 216) && (interrupts[0] <= 220)) |
| interrupts[0] -= 213; |
| if (interrupts[0] == 221) |
| interrupts[0] = 14; |
| if (interrupts[0] == 222) |
| interrupts[0] = 8; |
| |
| prom_setprop(node, pci_name, "interrupts", interrupts, |
| sizeof(interrupts)); |
| prom_setprop(node, pci_name, "interrupt-parent", &parent, |
| sizeof(parent)); |
| } |
| |
| /* |
| * The io-bridge has device_type set to 'io-bridge' change it to 'isa' |
| * so that generic isa-bridge code can add the SB600 and its on-board |
| * peripherals. |
| */ |
| name = "/pxp@0,e0000000/io-bridge@0"; |
| iob = call_prom("finddevice", 1, 1, ADDR(name)); |
| if (!PHANDLE_VALID(iob)) |
| return; |
| |
| /* device_type is already set, just change it. */ |
| |
| prom_printf("Changing device_type of SB600 node...\n"); |
| |
| prom_setprop(iob, name, "device_type", "isa", sizeof("isa")); |
| } |
| #else /* !CONFIG_PPC_PASEMI_NEMO */ |
| static inline void fixup_device_tree_pasemi(void) { } |
| #endif |
| |
| static void __init fixup_device_tree(void) |
| { |
| fixup_device_tree_maple(); |
| fixup_device_tree_maple_memory_controller(); |
| fixup_device_tree_chrp(); |
| fixup_device_tree_pmac(); |
| fixup_device_tree_efika(); |
| fixup_device_tree_pasemi(); |
| } |
| |
| static void __init prom_find_boot_cpu(void) |
| { |
| __be32 rval; |
| ihandle prom_cpu; |
| phandle cpu_pkg; |
| |
| rval = 0; |
| if (prom_getprop(prom.chosen, "cpu", &rval, sizeof(rval)) <= 0) |
| return; |
| prom_cpu = be32_to_cpu(rval); |
| |
| cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu); |
| |
| if (!PHANDLE_VALID(cpu_pkg)) |
| return; |
| |
| prom_getprop(cpu_pkg, "reg", &rval, sizeof(rval)); |
| prom.cpu = be32_to_cpu(rval); |
| |
| prom_debug("Booting CPU hw index = %d\n", prom.cpu); |
| } |
| |
| static void __init prom_check_initrd(unsigned long r3, unsigned long r4) |
| { |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (r3 && r4 && r4 != 0xdeadbeef) { |
| __be64 val; |
| |
| prom_initrd_start = is_kernel_addr(r3) ? __pa(r3) : r3; |
| prom_initrd_end = prom_initrd_start + r4; |
| |
| val = cpu_to_be64(prom_initrd_start); |
| prom_setprop(prom.chosen, "/chosen", "linux,initrd-start", |
| &val, sizeof(val)); |
| val = cpu_to_be64(prom_initrd_end); |
| prom_setprop(prom.chosen, "/chosen", "linux,initrd-end", |
| &val, sizeof(val)); |
| |
| reserve_mem(prom_initrd_start, |
| prom_initrd_end - prom_initrd_start); |
| |
| prom_debug("initrd_start=0x%lx\n", prom_initrd_start); |
| prom_debug("initrd_end=0x%lx\n", prom_initrd_end); |
| } |
| #endif /* CONFIG_BLK_DEV_INITRD */ |
| } |
| |
| #ifdef CONFIG_PPC_SVM |
| /* |
| * Perform the Enter Secure Mode ultracall. |
| */ |
| static int enter_secure_mode(unsigned long kbase, unsigned long fdt) |
| { |
| register unsigned long r3 asm("r3") = UV_ESM; |
| register unsigned long r4 asm("r4") = kbase; |
| register unsigned long r5 asm("r5") = fdt; |
| |
| asm volatile("sc 2" : "+r"(r3) : "r"(r4), "r"(r5)); |
| |
| return r3; |
| } |
| |
| /* |
| * Call the Ultravisor to transfer us to secure memory if we have an ESM blob. |
| */ |
| static void __init setup_secure_guest(unsigned long kbase, unsigned long fdt) |
| { |
| int ret; |
| |
| if (!prom_svm_enable) |
| return; |
| |
| /* Switch to secure mode. */ |
| prom_printf("Switching to secure mode.\n"); |
| |
| /* |
| * The ultravisor will do an integrity check of the kernel image but we |
| * relocated it so the check will fail. Restore the original image by |
| * relocating it back to the kernel virtual base address. |
| */ |
| relocate(KERNELBASE); |
| |
| ret = enter_secure_mode(kbase, fdt); |
| |
| /* Relocate the kernel again. */ |
| relocate(kbase); |
| |
| if (ret != U_SUCCESS) { |
| prom_printf("Returned %d from switching to secure mode.\n", ret); |
| prom_rtas_os_term("Switch to secure mode failed.\n"); |
| } |
| } |
| #else |
| static void __init setup_secure_guest(unsigned long kbase, unsigned long fdt) |
| { |
| } |
| #endif /* CONFIG_PPC_SVM */ |
| |
| /* |
| * We enter here early on, when the Open Firmware prom is still |
| * handling exceptions and the MMU hash table for us. |
| */ |
| |
| unsigned long __init prom_init(unsigned long r3, unsigned long r4, |
| unsigned long pp, |
| unsigned long r6, unsigned long r7, |
| unsigned long kbase) |
| { |
| unsigned long hdr; |
| |
| #ifdef CONFIG_PPC32 |
| unsigned long offset = reloc_offset(); |
| reloc_got2(offset); |
| #endif |
| |
| /* |
| * First zero the BSS |
| */ |
| memset(&__bss_start, 0, __bss_stop - __bss_start); |
| |
| /* |
| * Init interface to Open Firmware, get some node references, |
| * like /chosen |
| */ |
| prom_init_client_services(pp); |
| |
| /* |
| * See if this OF is old enough that we need to do explicit maps |
| * and other workarounds |
| */ |
| prom_find_mmu(); |
| |
| /* |
| * Init prom stdout device |
| */ |
| prom_init_stdout(); |
| |
| prom_printf("Preparing to boot %s", linux_banner); |
| |
| /* |
| * Get default machine type. At this point, we do not differentiate |
| * between pSeries SMP and pSeries LPAR |
| */ |
| of_platform = prom_find_machine_type(); |
| prom_printf("Detected machine type: %x\n", of_platform); |
| |
| #ifndef CONFIG_NONSTATIC_KERNEL |
| /* Bail if this is a kdump kernel. */ |
| if (PHYSICAL_START > 0) |
| prom_panic("Error: You can't boot a kdump kernel from OF!\n"); |
| #endif |
| |
| /* |
| * Check for an initrd |
| */ |
| prom_check_initrd(r3, r4); |
| |
| /* |
| * Do early parsing of command line |
| */ |
| early_cmdline_parse(); |
| |
| #ifdef CONFIG_PPC_PSERIES |
| /* |
| * On pSeries, inform the firmware about our capabilities |
| */ |
| if (of_platform == PLATFORM_PSERIES || |
| of_platform == PLATFORM_PSERIES_LPAR) |
| prom_send_capabilities(); |
| #endif |
| |
| /* |
| * Copy the CPU hold code |
| */ |
| if (of_platform != PLATFORM_POWERMAC) |
| copy_and_flush(0, kbase, 0x100, 0); |
| |
| /* |
| * Initialize memory management within prom_init |
| */ |
| prom_init_mem(); |
| |
| /* |
| * Determine which cpu is actually running right _now_ |
| */ |
| prom_find_boot_cpu(); |
| |
| /* |
| * Initialize display devices |
| */ |
| prom_check_displays(); |
| |
| #if defined(CONFIG_PPC64) && defined(__BIG_ENDIAN__) |
| /* |
| * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else |
| * that uses the allocator, we need to make sure we get the top of memory |
| * available for us here... |
| */ |
| if (of_platform == PLATFORM_PSERIES) |
| prom_initialize_tce_table(); |
| #endif |
| |
| /* |
| * On non-powermacs, try to instantiate RTAS. PowerMacs don't |
| * have a usable RTAS implementation. |
| */ |
| if (of_platform != PLATFORM_POWERMAC) |
| prom_instantiate_rtas(); |
| |
| #ifdef CONFIG_PPC64 |
| /* instantiate sml */ |
| prom_instantiate_sml(); |
| #endif |
| |
| /* |
| * On non-powermacs, put all CPUs in spin-loops. |
| * |
| * PowerMacs use a different mechanism to spin CPUs |
| * |
| * (This must be done after instanciating RTAS) |
| */ |
| if (of_platform != PLATFORM_POWERMAC) |
| prom_hold_cpus(); |
| |
| /* |
| * Fill in some infos for use by the kernel later on |
| */ |
| if (prom_memory_limit) { |
| __be64 val = cpu_to_be64(prom_memory_limit); |
| prom_setprop(prom.chosen, "/chosen", "linux,memory-limit", |
| &val, sizeof(val)); |
| } |
| #ifdef CONFIG_PPC64 |
| if (prom_iommu_off) |
| prom_setprop(prom.chosen, "/chosen", "linux,iommu-off", |
| NULL, 0); |
| |
| if (prom_iommu_force_on) |
| prom_setprop(prom.chosen, "/chosen", "linux,iommu-force-on", |
| NULL, 0); |
| |
| if (prom_tce_alloc_start) { |
| prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-start", |
| &prom_tce_alloc_start, |
| sizeof(prom_tce_alloc_start)); |
| prom_setprop(prom.chosen, "/chosen", "linux,tce-alloc-end", |
| &prom_tce_alloc_end, |
| sizeof(prom_tce_alloc_end)); |
| } |
| #endif |
| |
| /* |
| * Fixup any known bugs in the device-tree |
| */ |
| fixup_device_tree(); |
| |
| /* |
| * Now finally create the flattened device-tree |
| */ |
| prom_printf("copying OF device tree...\n"); |
| flatten_device_tree(); |
| |
| /* |
| * in case stdin is USB and still active on IBM machines... |
| * Unfortunately quiesce crashes on some powermacs if we have |
| * closed stdin already (in particular the powerbook 101). |
| */ |
| if (of_platform != PLATFORM_POWERMAC) |
| prom_close_stdin(); |
| |
| /* |
| * Call OF "quiesce" method to shut down pending DMA's from |
| * devices etc... |
| */ |
| prom_printf("Quiescing Open Firmware ...\n"); |
| call_prom("quiesce", 0, 0); |
| |
| /* |
| * And finally, call the kernel passing it the flattened device |
| * tree and NULL as r5, thus triggering the new entry point which |
| * is common to us and kexec |
| */ |
| hdr = dt_header_start; |
| |
| prom_printf("Booting Linux via __start() @ 0x%lx ...\n", kbase); |
| prom_debug("->dt_header_start=0x%lx\n", hdr); |
| |
| #ifdef CONFIG_PPC32 |
| reloc_got2(-offset); |
| #endif |
| |
| /* Move to secure memory if we're supposed to be secure guests. */ |
| setup_secure_guest(kbase, hdr); |
| |
| __start(hdr, kbase, 0, 0, 0, 0, 0); |
| |
| return 0; |
| } |